首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 23 毫秒
1.
Abstract

A physically-based hillslope hydrological model with shallow overland flow and rapid subsurface stormflow components was developed and calibrated using field experiments conducted on a preferential path nested hillslope in northeast India. Virtual experiments were carried out to perform sensitivity analysis of the model using the automated parameter estimation (PEST) algorithm. Different physical parameters of the model were varied to study the resulting effects on overland flow and subsurface stormflow responses from the theoretical hillslopes. It was observed that topographical shapes had significant effects on overland flow hydrographs. The slope profiles, surface storage, relief, rainfall intensity and infiltration rates primarily controlled the overland flow response of the hillslopes. Prompt subsurface stormflow responses were mainly dominated by lateral preferential flow, as soil matrix flow rates were very slow. Rainfall intensity and soil macropore structures were the most influential parameters on subsurface stormflow. The number of connected soil macropores was a more sensitive parameter than the size of macropores. In hillslopes with highly active vertical and lateral preferential pathways, saturation excess overland flow was not evident. However, saturation excess overland flow was generated if the lateral macropores were disconnected. Under such conditions, rainfall intensity, duration and preferential flow rate governed the process of saturation excess overland flow generation from hillslopes.
Editor D. Koutsoyiannis; Associate editor C. Perrin  相似文献   

2.
Soil moisture dynamics have a significant effect on overland flow generation. Catchment aspect is one of the major controlling factors of overland flow and soil moisture behaviour. A few experimental studies have been carried out in the uneven topography of the Himalayas. This study presents plot‐scale experiments using portable rainfall simulator at an altitude of 1,230 m above mean sea level and modelling of overland flow using observed datasets. Two plots were selected in 2 different aspects of Aglar watershed of Lesser Himalaya; the agro‐forested (AF) plot was positioned at the north aspect whereas the degraded (DE) plot was located at the south aspect of the hillslope. HS flumes and rain gauges were installed to measure the runoff at the outlet of the plot and the rainfall depth during rainfall simulation experiments. Moreover, 10 soil moisture sensors were installed at upslope and downslope locations of both the plots at 5, 15, 25, 35, and 45 cm depth from ground level to capture the soil moisture dynamics. The tests were conducted at intensities of 79.8 and 75 mm/hr in AF plot and 82.2 and 72 mm/hr in the DE plot during Test 1 and Test 2, respectively. The observed data indicate the presence of reinfiltration process only in the AF plot. The high water holding capacity and the presence of reinfiltration process results in less runoff volume in the AF plot compared with the DE plot. The Hortonian overland flow mechanism was found to be the dominant overland flow mechanism as only a few layers of top soil get saturated during all of the rainfall–runoff experiments. The runoff, rainfall, and soil moisture data were subsequently used to calibrate the parameters of HYDRUS‐2D overland flow module to simulate the runoff hydrograph and soil moisture. The components of hydrograph were evaluated in terms of peak discharge, runoff volume and time of concentration, the results were found to be within the satisfactory range. The goodness of fit of simulated hydrographs were more than 0.85 and 0.95 for AF and DE plot, respectively. The model produced satisfactory simulation results of soil moisture for all of the rainfall–runoff experiments. The HYDRUS‐2D overland flow module was found promising to simulate the runoff hydrograph and soil moisture in plot‐scale research.  相似文献   

3.
Watershed delineation is a required step when conducting any spatially distributed hydrological modelling. Automated approaches are often proposed to delineate a watershed based on a river network extracted from the digital elevation model (DEM) using the deterministic eight‐neighbour (D8) method. However, a realistic river network cannot be derived from conventional DEM processing methods for a large flat area with a complex network of rivers, lakes, reservoirs, and polders, referred to as a plain river network region (PRNR). In this study, a new approach, which uses both hydrographic features and DEM, has been developed to address the problems of watershed delineation in PRNR. It extracts the river nodes and determines the flow directions of the river network based on a vector‐based hydrographic feature data model. The river network, lakes, reservoirs, and polders are then used to modify the flow directions of grid cells determined by D8 approach. The watershed is eventually delineated into four types of catchments including lakes, reservoirs, polders, and overland catchments based on the flow direction matrix and the location of river nodes. Multiple flow directions of grid cells are represented using a multi‐direction encoding method, and multiple outflows of catchments are also reflected in the topology of catchments. The proposed approach is applied to the western Taihu watershed in China. Comparisons between the results obtained from the D8 approach, the ‘stream burning’ approach, and those from the proposed approach clearly demonstrate an improvement of the new approach over the conventional approaches. This approach will benefit the development of distributed hydrological models in PRNR for the consideration of different types and multiple inlets and outlets of catchments. Copyright © 2015 John Wiley & Sons, Ltd.  相似文献   

4.
Land use in Panama has changed dramatically with ongoing deforestation and conversion to cropland and cattle pastures, potentially altering the soil properties that drive the hydrological processes of infiltration and overland flow. We compared plot-scale overland flow generation between hillslopes in forested and actively cattle-grazed watersheds in Central Panama. Soil physical and hydraulic properties, soil moisture and overland flow data were measured along hillslopes of each land-use type. Soil characteristics and rainfall data were input into a simple, 1-D representative model, HYDRUS-1D, to simulate overland flow that we used to make inferences about overland flow response at forest and pasture sites. Runoff ratios (overland flow/rainfall) were generally higher at the pasture site, although no overall trends were observed between rainfall characteristics and runoff ratios across the two land uses at the plot scale. Saturated hydraulic conductivity (Ks) and bulk density were different between the forest and pasture sites (p < 10−4). Simulating overland flow in HYDRUS-1D produced more outputs similar to the overland flow recorded at the pasture site than the forest site. Results from our study indicate that, at the plot scale, Hortonian overland flow is the main driver for overland flow generation at the pasture site during storms with high-rainfall totals. We infer that the combination of a leaf litter layer and the activation of shallow preferential flow paths resulting in shallow saturation-excess overland flow are likely the main drivers for plot scale overland flow generation at the forest site. Results from this study contribute to the broader understanding of the delivery of freshwater to streams, which will become increasingly important in the tropics considering freshwater resource scarcity and changing storm intensities.  相似文献   

5.
The traditional direct method (i.e. metric ruler and rillmeter) of monitoring rill erosion at plot scale is time consuming and invasive because it modifies the surface of the rilled area. Measuring rill features using a drone‐based technology is considered a non‐invasive method allowing a fast field relief. In the experimental Sparacia area a survey by a quadricopter Microdrones md4‐200 was carried out, and this relief allowed the generation of a Digital Elevation Model (DEM), with a mesh size of 1 cm and a resolution elevation equal to 2 mm, for three plots (L, G and C) affected by rill erosion. At first for the experimental L plot, which is 44 m long, the rill features were surveyed by a ‘manual’ method which was carried out by drawing on the PC screen the rill paths obtained by a visual orthophoto interpretation. This manual method was not applicable for the plots in which rills of limited depth occurred and were not detectable. Then, for both L plot and the other experimental plots having a length ranging from 22 to 44 m, an ‘automatic’ extraction method of rills from DEM was applied. Using an appropriate calculation routine, a vector coverage of transects orthogonal to the main flow direction (i.e. the maximum slope steepness path) was generated. The intersection of each plot DEM with the transect coverage allowed to obtain both the cross sections and the main rill morphological features. For the L plot the comparison between the rill morphological features obtained by the two different methods (manual, automatic) was carried out. Finally, the length–volume relationship and a dimensionless relationship proposed in literature were tested for all studied experimental plots. Copyright © 2015 John Wiley & Sons, Ltd.  相似文献   

6.
Spectral filtering was compared with traditional mean spatial filters to assess their ability to identify and remove striped artefacts in digital elevation data. The techniques were applied to two datasets: a 100 m contour derived digital elevation model (DEM) of southern Norway and a 2 m LiDAR DSM of the Lake District, UK. Both datasets contained diagonal data artefacts that were found to propagate into subsequent terrain analysis. Spectral filtering used fast Fourier transformation (FFT) frequency data to identify these data artefacts in both datasets. These were removed from the data by applying a cut filter, prior to the inverse transform. Spectral filtering showed considerable advantages over mean spatial filters, when both the absolute and spatial distribution of elevation changes made were examined. Elevation changes from the spectral filtering were restricted to frequencies removed by the cut filter, were small in magnitude and consequently avoided any global smoothing. Spectral filtering was found to avoid the smoothing of kernel based data editing, and provided a more informative measure of data artefacts present in the FFT frequency domain. Artefacts were found to be heterogeneous through the surfaces, a result of their strong correlations with spatially autocorrelated variables: landcover and landsurface geometry. Spectral filtering performed better on the 100 m DEM, where signal and artefact were clearly distinguishable in the frequency data. Spectrally filtered digital elevation datasets were found to provide a superior and more precise representation of the landsurface and be a more appropriate dataset for any subsequent geomorphological applications. Copyright © 2007 John Wiley & Sons, Ltd.  相似文献   

7.
Distributed hydrological models require a detailed definition of a watershed's internal drainage structure. The conventional approach to obtain this drainage structure is to use an eight flow direction matrix (D8) which is derived from a raster digital elevation model (DEM). However, this approach leads to a rather coarse drainage structure when monitoring or gauging stations need to be accurately located within a watershed. This is largely due to limitations of the D8 approach and the lack of information over flat areas and pits. The D8 approach alone is also unable to differentiate lakes from plain areas.

To avoid these problems a new approach, using a digital river and lake network (DRLN) as input in addition to the DEM, has been developed. This new approach allows for an accurate fit between the DRLN and the modelled drainage structure, which is represented by a flow direction matrix and a modelled watercourse network. More importantly, the identification of lakes within the modelled network is now possible. The proposed approach, which is largely rooted in the D8 approach, uses the DRLN to correct modelled flow directions and network calculations. For DEM cells overlapped by the DRLN, flow directions are determined using DRLN connections only. The flow directions of the other DEM cells are evaluated with the D8 approach which uses a DEM that has been modified as a function of distance to the DRLN.

The proposed approach has been tested on the Chaudière River watershed in southern Québec, Canada. The modelled watershed drainage structure showed a high level of coherence with the DRLN. A comparison between the results obtained with the D8 approach and those obtained by the proposed approach clearly demonstrated an improvement over the conventionally modelled drainage structure. The proposed approach will benefit hydrological models which require data such as a flow direction matrix, a river and lake network and sub-watersheds for drainage structure information.  相似文献   


8.
How long is a hillslope?   总被引：1，自引：0，他引：1       下载免费PDF全文
Hillslope length is a fundamental attribute of landscapes, intrinsically linked to drainage density, landslide hazard, biogeochemical cycling and hillslope sediment transport. Existing methods to estimate catchment average hillslope lengths include inversion of drainage density or identification of a break in slope–area scaling, where the hillslope domain transitions into the fluvial domain. Here we implement a technique which models flow from point sources on hilltops across pixels in a digital elevation model (DEM), based on flow directions calculated using pixel aspect, until reaching the channel network, defined using recently developed channel extraction algorithms. Through comparisons between these measurement techniques, we show that estimating hillslope length from plots of topographic slope versus drainage area, or by inverting measures of drainage density, systematically underestimates hillslope length. In addition, hillslope lengths estimated by slope–area scaling breaks show large variations between catchments of similar morphology and area. We then use hillslope length–relief structure of landscapes to explore nature of sediment flux operating on a landscape. Distinct topographic forms are predicted for end‐member sediment flux laws which constrain sediment transport on hillslopes as being linearly or nonlinearly dependent on hillslope gradient. Because our method extracts hillslope profiles originating from every ridgetop pixel in a DEM, we show that the resulting population of hillslope length–relief measurements can be used to differentiate between linear and nonlinear sediment transport laws in soil mantled landscapes. We find that across a broad range of sites across the continental United States, topography is consistent with a sediment flux law in which transport is nonlinearly proportional to topographic gradient. © 2016 The Authors. Earth Surface Processes and Landforms published by John Wiley & Sons Ltd.  相似文献   

9.
There is considerable interest in how headwater management may influence downstream flood peaks in temperate humid regions. However, there is a dearth of data on flow velocities across headwater hillslopes and limited understanding of whether surface flow velocity is influenced by seasonal changes in roughness through vegetation cycles or management. A portable hillslope flume was used to investigate overland flow velocities for four common headwater grassland habitats in northern England: Low-density Grazing, Hay Meadow, Rank Grassland and Juncus effusus Rush pasture. Overland flow velocity was measured in replicate plots for each habitat, in response to three applied flow rates, with the experiments repeated during five different periods of the annual grassland cycle. Mean annual overland flow velocity was significantly lower for the Rank Grassland habitat (0.026 m/s) followed by Low-density Grazing and Rushes (0.032 and 0.029 m/s), then Hay Meadows (0.041 m/s), which had the greatest mean annual velocity (examples from 12 L/min flow rate). Applying our mean overland flow velocities to a theoretical 100 m hillslope suggests overland flow is delayed by >1 hr on Rank Grassland when compared to Hay Meadows in an 18 mm storm. Thus grassland management is important for slowing overland flow and delaying peak flows across upland headwaters. Surface roughness was also strongly controlled by annual cycles of vegetation growth, decay, grazing and cutting. Winter overland flow velocities were significantly higher than in summer, varying between 0.004 m/s (Rushes, November) and 0.034 m/s (Rushes, June); and velocities significantly increased after cutting varying between 0.006 m/s (Hay meadows, July) and 0.054 m/s (Hay meadows, September). These results show that seasonal vegetation change should be incorporated into flood modelling, as cycles of surface roughness in grasslands strongly modify overland flow, potentially having a large impact on downstream flood peak and timing. Our data also showed that Darcy-Weisbach roughness approximations greatly over-estimated measured flow velocities.  相似文献   

10.
The objective of this study was to test the practicability of defining hydrologic response units as combinations of soil, land use and topography for modelling infiltration at the hillslope and catchment scales. In an experimental catchment in the East African Highlands (Kwalei, Tanzania), three methods of measuring infiltration were compared for their ability to capture the spatial variability of effective hydraulic conductivity: the constant head (CH) method; the tension infiltration (TI) method; and the mini‐rainfall simulation (RS) method. The three methods yielded different probability distributions of effective hydraulic conductivity and suggested different types of hydrologic response units. Independently from these measurements, the occurrence of infiltration‐excess overland flow was monitored over an area of 6 ha by means of overland flow detectors. The observed pattern of overland flow occurrence did not match any of the patterns suggested by the infiltration measurements. Instead, clusters of spots with overland flow were practically independent from field borders. Geostatistical analysis of the overland flow confirmed the absence of spatial correlation for distances over 40 m. The RS method yielded the pattern closest to the observations, probably because the method simulated better the processes that trigger infiltration‐excess overland flow, i.e. soil sealing and infiltration through macroporosity. The RS hydrologic response unit correlated significantly with observed overland flow frequency. However, the location of clusters and ‘hot spots’ of overland flow remained largely unexplained by land use, soil and topographic variables. It is concluded that using such landscape variables to define hydrologic units may create artificial boundaries that do no correspond to physical realities, especially if the stochastic component within hydrologic units is neglected. Copyright © 2005 John Wiley & Sons, Ltd.  相似文献   

11.
《Journal of Hydrology》1999,214(1-4):111-129
  相似文献   

12.
Two distributed parameter models, a one‐dimensional (1D) model and a two‐dimensional (2D) model, are developed to simulate overland flow in two small semiarid shrubland watersheds in the Jornada basin, southern New Mexico. The models are event‐based and represent each watershed by an array of 1‐m2 cells, in which the cell size is approximately equal to the average area of the shrubs. Each model uses only six parameters, for which values are obtained from field surveys and rainfall simulation experiments. In the 1D model, flow volumes through a fixed network are computed by a simple finite‐difference solution to the 1D kinematic wave equation. In the 2D model, flow directions and volumes are computed by a second‐order predictor–corrector finite‐difference solution to the 2D kinematic wave equation, in which flow routing is implicit and may vary in response to flow conditions. The models are compared in terms of the runoff hydrograph and the spatial distribution of runoff. The simulation results suggest that both the 1D and the 2D models have much to offer as tools for the large‐scale study of overland flow. Because it is based on a fixed flow network, the 1D model is better suited to the study of runoff due to individual rainfall events, whereas the 2D model may, with further development, be used to study both runoff and erosion during multiple rainfall events in which the dynamic nature of the terrain becomes an important consideration. Copyright © 2006 John Wiley & Sons, Ltd.  相似文献   

13.
The resolution of a digital elevation model (DEM) is a crucial factor in watershed hydrologic and environmental modelling. DEM resolution can cause significant variability in the representation of surface topography, which further affects quantification of hydrologic connectivity and simulation of hydrologic processes. The objective of this study is to examine the effects of DEM resolution on (1) surface microtopographic characteristics, (2) hydrologic connectivity, and (3) the spatial and temporal variations of hydrologic processes. A puddle‐to‐puddle modelling system was utilized for surface delineation and modelling of the puddle‐to‐puddle overland flow dynamics, surface runoff, infiltration, and unsaturated flow for nine DEM resolution scenarios of a field plot surface. Comparisons of the nine modelling scenarios demonstrated that coarser DEM resolutions tended to eliminate topographic features, reduce surface depression storage, and strengthen hydrologic connectivity and surface runoff. We found that reduction in maximum depression storage and maximum ponding area was as high as 97.56% and 76.36%, respectively, as the DEM grid size increased from 2 to 80 cm. The paired t‐test and fractal analysis demonstrated the existence of a threshold DEM resolution (10 cm for the field plot), within which the DEM‐based hydrologic modelling was effective and acceptable. The effects of DEM resolution were further evaluated for a larger surface in the Prairie Pothole Region subjected to observed rainfall events. It was found that simulations based on coarser resolution DEMs (>10 m) tended to overestimate ponded areas and underestimate runoff discharge peaks. The simulated peak discharge from the Prairie Pothole Region surface reduced by approximately 50% as the DEM resolution changed from 2 to 90 m. Fractal analysis results elucidated scale dependency of hydrologic and topographic processes. In particular, scale analysis highlighted a unique constant–threshold–power relationship between DEM scale and topographic and hydrologic parameters/variables. Not only does this finding allow one to identify threshold DEM but also further develop functional relationships for scaling to achieve valid topographic characterization as well as effective and efficient hydrologic modelling. Copyright © 2016 John Wiley & Sons, Ltd.  相似文献   

14.
The processes of hillslope runoff and erosion are typically represented at coarse spatial resolution in catchment‐scale models due to computational limitations. Such representation typically fails to incorporate the important effects of topographic heterogeneity on runoff generation, overland flow, and soil erosion. These limitations currently undermine the application of distributed catchment models to understand the importance of thresholds and connectivity on hillslope and catchment‐scale runoff and erosion, particularly in semi‐arid environments. This paper presents a method for incorporating high‐resolution topographic data to improve sub‐grid scale parameterization of hillslope overland flow and erosion models. Results derived from simulations conducted using a kinematic wave overland flow model at 0.5 m spatial resolution are used to parameterize the depth–discharge relationship in the overland flow model when applied at 16 m resolution. The high‐resolution simulations are also used to derive a more realistic parameterization of excess flow shear stress for use in the 16 m resolution erosion model. Incorporating the sub‐grid scale parameterization in the coarse‐resolution model (16 m) leads to improved predictions of overland flow and erosion when evaluated using results derived from high‐resolution (0.5 m) model simulations. The improvement in performance is observed for a range of event magnitudes and is most notable for erosion estimates due to the non‐linear dependency between the rates of erosion and overland flow. Copyright © 2013 John Wiley & Sons, Ltd.  相似文献   

15.
Stream-channel morphologic responses are found to be related to different parameters measuring traditional agricultural land-use patterns and practices in 50 small headwater basins in southwest Nigeria. The problem of intercorrelations among these parameters made it initially difficult to establish their precise channel enlargement effects and to calibrate an impact prediction model. Through factor analysis of the 22 land-use and morphometric parameters, six factors identified as measures of traditional land-use practice, farm size, planting activities, shortened fallow, relief and overland flow, were found to account for 86% of the variance in the data. The factor-defining variables are length of cropping period, areas in short fallow, farm-plot size, length of farm preparation, relief ratio and overland flow. In a multiple regression analysis, only the first three variables were found to be statistically significant in explaining stream-channel morphologic responses. Thus, areas in short fallows, average farm size and length of cropping period adequately described those aspects of the traditional farming practices that affect basin hydrologic and channel responses. Since these variables were orthogonally derived, they formed the basis for the evaluation of the channel impact status of traditional land-use activities. The duplication of information and effects in the original 22-variable full-rank model were removed while utilizing the three-factor reduced model.  相似文献   

16.
《Geofísica Internacional》2014,53(3):241-257
We used the VLF technique to infer fault or major fracture zones that might serve as path for contaminant waste fluids in the Matatlan dumpsite, in Guadalajara, western Mexico. To interpret the data we used the Fraser, and Karous-Hjelt filters.Profiles were interpreted with 2D direct modeling based on Karous-Hjelt modified filter (K-H). The Fraser and Karous-Hjelt conjugated filter were applied to the entire data. The results of both techniques show similarities in the directions and positions of anomalous features, which are assumed fault or fracture zones. We observed one fault zone at the centre of the site, with a NEE-SWW strike. Other important inferred structures have NW-SE directions at the western part of the site.The cooperative use of both techniques, based on K-H filter and the Fraser filter give results as an N-S inferred structure in the westernmost part of the zone, as well as NW-SE linear anomalies, mainly in the western half of the site. The N-S structure has the same direction as that of Rio Grande de Santiago Canyon. The NW-SE features coincide with the directions of the Tepic-Zacoalco rift. Others NE-SW lineaments are located towards the centre of the area. These facts coincide strongly with the predominance of fracture groups show in the fracture analysis. The inferred structures could serve as conduits for the leachates to migrate towards the Coyula canyon as well as towards the Rio Grande de Santiago Canyon.Statistic analysis of fracture orientations showed N-S (A), N75-80E (B), N60-65W (C), and N25-30W (D) main directions, and N45-55E (E), and 90E (F) secondary directions. Group A coincides with the direction of the Rio Grande de Santiago Canyon, whereas pattern F have the same direction as Coyula Canyon.  相似文献   

17.
There is a dearth of knowledge on the runoff processes of eucalypt woodland communities in the semi-arid tropics of Australia. The work was undertaken on a 100 m transect of a 0·8 degree hillslope typical of the ‘smooth plainlands’ of central-north Queensland. This paper introduces a new experimental design for measuring overland flow in such areas by way of a cascade system of unbounded runoff plots which allow the inputs and outputs between troughs to be calculated. Most storms generate overland flow. Time to overland flow ranges between 1 and 18 min where rain intensities are above 10mm hr−1 and when the average detention storage of 3·6 mm is exceeded. The bare soil surfaces within the scattered grass understory control the runoff generation process through the temporal variability of field saturated hydraulic conductivity. The study demonstrated that overland flow is mainly redistributed over the freely-draining oxic soil. Some areas export more overland flow than they gain from upslope (runoff), others gain more overland flow than they export (runon). Over the study period only 2 per cent of total rain is transferred out of this 100 m transect as overland flow due to the short duration of storms, the relatively high soil permeability, and the low slope angle. The remainder adds to the large soil water store or deep drainage. The variability of runoff–runon over these ‘smooth plainlands’ highlights how results from bounded plots would be misleading in such areas.  相似文献   

18.
Range-front alluvial fan deposition in arid and semiarid environments records vast amounts of climatic and tectonic information. Differentiating and characterizing alluvial fan morphology is an important part in Quaternary alluvial fan research. Traditional method such as field observations is a most important part of deciphering and mapping the alluvial fan. Large-scale automatically mapping of alluvial fan stratigraphy before traditional field observations could provide guidance for mapping alluvial fan morphology, thus improving subsequent field work efficiency. In this research, high-resolution topographic data were used to quantify relief and roughness of alluvial fan within the Laohushan. These data suggest that mean surface roughness plotted against the size of the moving window is characterized by an initial increase in surface roughness with increased window size, but it shows no longer increase as a function of windows size. These data also suggest that alluvial fans in this study site smooth out with time until a threshold is crossed where roughness increases at greater wavelength with age as a result of surface runoff and headward tributary incision into the oldest surfaces which suggests the evolution process of alluvial fan. Researchers usually differentiate alluvial morphology by mapping characteristics of fan surface in the field by describing surface clast size, rock varnish accumulation, and desert pavement development and analysis of aerial photographs or satellite imagery. Recently, the emergence of high-resolution topographic data has renewed interest in the quantitative characterization of alluvial and colluvium landforms. Surface morphology that fan surface initially tends to become smoother with increasing age due to the formation of desert pavement and the degradation of bar-and-swale topography and subsequently, landforms become more dissected due to tectonics and climatic change induced increased erosion and channelization of the surface with time is widely used to distinguish alluvial fan types. Those characteristics would reflect various kinds of morphology metrics extracted from high-resolution topographic data. In the arid and semiarid regions of northwestern China, plenty of alluvial fans are preserved completely for lack of artificial reforming, and there exists sparse surface vegetation. In the meantime, range-front alluvial fan displaced by a number of active faults formed a series of dislocated landforms with different offsets which is a major reference mark in fault activity research. In this research, six map units(Qf6-Qf1), youngest to oldest, were observed in the study area by mapping performed by identifying geomorphic features in the field that are spatially discernible using hill-shade and digital orthophoto map. Alluvial fan relief and roughness were computed across multiple observation scales(2m×2m to 100m×100m)based on the topographic parameters of altitude difference and standard deviation of slope, curvature and aspect. In this research, mean relief keeps increasing with increased window size while mean surface roughness is characterized by a rapid increase over wavelengths of 6~15m, representing the typical length scale of bar-and-swale topography. At longer wavelengths, surface roughness values increase by only minor amounts, suggesting the topographic saturation length is 6~15m for those fan surfaces in which saturation length of standard deviation of curvature is less than 8m. Box and whisker plot of surface roughness averaged over 8m2 for each alluvial fan unit in the study area suggests that the pattern of surfaces smoothing out with age and then starting to become rougher again as age increases further beyond Qf4 or Qf3 unit. The younger alluvial fan is characterized by prominent bar-and-swale while the older alluvial fan is characterized by tributaries headward incision. Cumulative frequency distributions of relief and surface roughness in Figure 8 are determined in an 8m by 8m moving window for the comparison of six alluvial fan units in the northeast piedmont of Laohushan. From these distributions we know that Qf6 and Qf1 reflect the prominent relief which is related to bar-and-swale and tributaries headward incision respectively, while Qf4 and Qf3 reflect the moderate relief which is related to subdued topography. Surface roughness, in addition to facilitating the characterization of individual fan units, lends insight to alluvial landform development. We summarize an alluvial landform evolutionary scheme which evolves four stages depending on characteristics of alluvial fan morphology development and features of relief and roughness. The initial stage in this study site is defined as the active alluvial fan channels with bars of coarse cobbles and boulders and swales consisting of finer-grained pebbles and sand which could be reflected by high mean relief and mean roughness values. As time goes, bar-and-swale topography is still present, but an immature pavement, composed of finer grained clasts, has started to form. In the third stage, the bar-and-swale topography on the fan surface is subdued, yet still observable, with clasts ranging from pebbles to cobbles in size and there exists obvious headward tributary incision. Eventually, tributary channels form from erosion by surface runoff. Headward incision of these tributaries wears down the steep walls of channels that are incised through the stable, planar surface, transforming the oldest alluvial landforms into convex hillslopes, leaving only small remnants of the planar surface intact. Those evolutionary character suggests that alluvial fans in this area smooth out with time, however, relief or roughness would be translated to increase at greater wavelength with age until a threshold is crossed. This research suggests that relief and roughness calculated from high-resolution topographic data of this study site could reflect alluvial fan morphology development and provide constraint data to differentiate alluvial fan unit.  相似文献   

19.
Vegetative filter strips (VFSs) can effectively trap sediment in overland flow, but little information is available on its performance in controlling high‐concentration sediment and the runoff hydraulics in VFS. Flume experiments were conducted to investigate the sediment deposition, hydraulics of overland flow and their relationships in simulating VFS under a great range of sediment concentrations with four levels of vegetation cover (bare slope and 4%, 11% and 17%) and two flow rates (15 and 30 L min?1). Sediment concentrations varied from 30 to 400 kg m?3 and slope gradient was 9°. Both the deposited sediment load and deposition efficiency in VFS increased as the vegetation cover increased. Sediment concentration had a positive effect on the deposited load but no effect on deposition efficiency. A lower flow rate corresponded to greater deposition efficiency but had little effect on deposited load. Flow velocities decreased as vegetation cover increased. Sediment concentration had a negative effect on the mean velocity but no effect on surface velocity. Hydraulic resistance increased as the vegetation cover and sediment concentration increased. Sediment deposition efficiency had a much more pronounced relationship with overland flow hydraulics compared with deposited load, especially with the mean flow velocity, and there was a power relationship between them. Flow regime also affected the sediment deposition efficiency, and the efficiency was much higher under subcritical than supercritical flow. The results will be useful for the design of VFS and the control of sediment flowing into rivers in areas with serious soil erosion. Copyright © 2015 John Wiley & Sons, Ltd.  相似文献   

20.
A Gumbel distribution for maxima is proposed as a model for the depths of interrill overland flow. The model is tested against three sets of field measurements of interrill overland flow depths obtained on shrubland and grassland hillslopes at Walnut Gulch Experimental Watershed, southern Arizona. The model is found to be a satisfactory fit to 81 of the 90 measured distributions. The shape δ and location λ parameters of all fitted distributions are strongly correlated with discharge. However, whereas a common relationship exists between discharge and δ for all depth distributions, the relationships with λ vary systematically downslope. Using the Gumbel distribution as a model for the distribution of overland flow depths, a probabilistic model for the initiation of rills is developed, drawing upon the previous work of Nearing. As an illustration of this approach, we apply this model to the shrubland and grassland hillslopes at Walnut Gulch. It is concluded that the presence of rills on the shrubland, but not on the grassland, is due to the greater runoff coefficient for the shrubland and/or the greater propensity of the shrubland for soil disturbance compared with the grassland. Finally, a generalized conceptual model for rill initiation is proposed. This model takes account of the depth distribution of overland flow, the probability of flow shear stress in excess of local soil shear strength, the spatial variability in soil shear strength and the diffusive effect of soil detachment by raindrops. Copyright © 2005 John Wiley & Sons, Ltd.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号