首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 218 毫秒
1.
This study investigates how medium‐term gully‐development data differ from short‐term data, and which factors influence their spatial and temporal variability at nine selected actively retreating bank gullies situated in four Spanish basin landscapes. Small‐format aerial photographs using unmanned, remote‐controlled platforms were taken at the gully sites in short‐term intervals of one to two years over medium‐term periods of seven to 13 years and gully change during each period was determined using stereophotogrammetry and a geographic information system. Results show a high variability of annual gully retreat rates both between gullies and between observation periods. The mean linear headcut retreat rates range between 0·02 and 0·26 m a–1. Gully area loss was between 0·8 and 22 m² a–1 and gully volume loss between 0·5 to 100 m³ a–1, of which sidewall erosion may play a considerable part. A non‐linear relationship between catchment area and medium‐term gully headcut volume change was found for these gullies. The short‐term changes observed at the individual gullies show very high variability: on average, the maximum headcut volume change observed in 7–13 years was 14·3 times larger than the minimum change. Dependency on precipitation varies but is clearly higher for headcuts than sidewalls, especially in smaller and less disturbed catchments. The varying influences of land use and human activities with their positive or negative effects on runoff production and connectivity play a dominant role in these study areas, both for short‐term variability and medium‐term difference in gully development. The study proves the value of capturing spatially continuous, high‐resolution three‐dimensional data using small‐format aerial photography for detailed gully monitoring. Results confirm that short‐term data are not representative of longer‐term gully development and demonstrate the necessity for medium‐ to long‐term monitoring. However, short‐term data are still required to understand the processes – particularly human activity at varying time scales – causing fluctuations in gully erosion rates. Copyright © 2011 John Wiley & Sons, Ltd.  相似文献   

2.
To quantify the changes in flow energy, sediment yield and surface landform impacted by headcut height during bank gully erosion, five experimental platforms were constructed with different headcut heights ranging from 25 to 125 cm within an in situ active bank gully head. A series of scouring experiments were conducted under concentrated flow and the changes in flow energy, sediment yield and surface landform were observed. The results showed that great energy consumption occurred at gully head compared to the upstream area and gully bed. The flow energy consumption at gully heads and their contribution rates increased significantly with headcut height. Gully headcuts also contributed more sediment yield than the upstream area. The mean sediment concentrations at the outlet of plots were 2.3 to 7.3 times greater than those at the end of upstream area. Soil loss volume at gully heads and their contribution rates also increased with headcut height significantly. Furthermore, as headcut height increased, the retreat distance of gully heads increased, which was 1.7 to 8.9 times and 1.1 to 3.2 times greater than the incision depth of upstream area and gully beds. Positive correlations were found between energy consumption and soil loss, indicating that energy consumption could be used to estimate soil loss of headcut erosion. Headcut height had a significant impact on flow energy consumption, and thus influenced the changes in sediment yield and landform during the process of gully headcut erosion. Headcut height was one of the important factors for gully erosion control in this region. Further studies are needed to identify the role of headcut height under a wide condition. Copyright © 2018 John Wiley & Sons, Ltd.  相似文献   

3.
A simple field‐based monitoring programme was established in a small catchment (area 4·6 km2) to find the rates of gully erosion in the Siwalik Hills, Nepal. The rates are used to estimate the amount of sediment produced by gully erosion in the catchment. Three large and active gullies were selected with areas ranging from 0·44 to 0·78 ha. Aerial photographs taken in 1964, 1978 and 1992 were ortho‐rectified and used to study the dynamics of gully heads. The same gullies were also monitored manually using an orthogonal reference system fixed by erosion pins around the gully heads. Results from the aerial photos indicated that the gullies expanded remarkably over the period from 1964 to 1992, by 34 to 58 per cent. Head‐retreat rates during that period were 0·48, 0·55 and 0·73 m a?1 and average annual sediment evacuation was estimated as 2534 ± 171, 959 ± 60 and 2783 ± 118 m3 a?1 for the three gullies respectively. From the field measurement, estimated volumes were found to vary from 731 ± 57 to 2793 ± 201 m3 a?1 over the monitoring period of two years. It was also found that the gullies produce sediment which accounts for up to 59 per cent of the sediment produced from surface erosion in the headwater catchment. The findings are useful for planning and executing appropriate control measures and constructing a sediment hazard map at the catchment scale. Copyright © 2006 John Wiley & Sons, Ltd.  相似文献   

4.
Gully rehabilitation can contribute to catchment management by stabilizing erosion and reducing downstream sediment yields, yet the globally observed responses are variable. Developing the technical basis for gully rehabilitation and establishing guidelines for application requires studies that evaluate individual rehabilitation measures in specific environments. An eight-year field experiment was undertaken to evaluate sediment yield and vegetation responses to several gully rehabilitation measures. The rehabilitation measures aimed to reduce surface runoff into gully head cuts, trap sediment on gully floors and increase vegetation cover on gully walls and floors. The study occurred in a savanna rangeland in northeast Australia. Two gullies were subject to treatments while four gullies were monitored as untreated controls. A runoff diversion structure reduced headcut erosion from 4.3 to 1.2 m2 yr−1. Small porous check dams and cattle exclusion reduced gully total sediment yields by more than 80%, equivalent to a reduction of 0.3 to 2.4 t ha−1 yr−1, but only at catchment areas less than 10 ha. Fine sediment yields (silt and clay) were reduced by 7 and 19% from the two treated gullies, respectively. The porous check dam deposits contained a lower percentage of the fine fraction than the parent soil. Significant regeneration of gully floor vegetation occurred, associated with trapping of organic litter and fine sediment. Increases in vegetation cover and biomass were comprised of native perennial grasses, trees and shrubs. In variable climates, long-term gully rehabilitation will progress during wetter periods, and regress during droughts. Understanding linkages between rehabilitation measures, their hydrologic, hydraulic and vegetation effects and gully sediment yields is important to defining the conditions for their success.  相似文献   

5.
Large (>0.1 km2) gully–mass movement complexes (badass gullies) are significant contributors to the sediment cascade in New Zealand's steepland East Coast Region catchments. The scale of change taking place in these gully systems allows significant evolution in morphology and sediment dynamics to be tracked at annual to decadal timescales. Here we document changes in two adjacent badass gullies in Waipaoa catchment (Tarndale and Mangatu) to infer sediment generation processes and connectivity using a morphological budgeting approach. A baseline dataset for this study is provided by a LiDAR-derived digital elevation model (DEM) in 2005. We produced new DEMs and orthophoto mosaics using photogrammetry in 2017, 2018, and 2019 to quantify gully morphodynamics and associated volumes of sediment erosion and deposition in both systems as they co-evolved. Results indicate ongoing rapid development of both gully complexes. Severe erosion took place at the gully heads with lowering and migration (up to 25 m vertically and laterally) of the topographic divide separating the two gullies between 2005 and 2019. Over the same period, net lowering of each gully system was ~250 mm year−1. Key sediment-generating processes included surface erosion, deep-seated landslides, and debris flows. Longer term, the overall contribution of sediment from both badass gullies to the Waipaoa catchment has been declining. In the mid-20th century, both gullies yielded in excess of 300 kt year−1. From 2005 to 2019, 80 kt year−1 was yielded from Tarndale and 110 kt year−1 from Mangatu. Our most recent surveys demonstrated considerable variability in sediment yield, ranging from 76 kt year−1 (2017–2018) to 291 kt year−1 (2018–2019). The annual variability observed reflects the complex morphodynamics of discrete hillslopes and tributary fans in these badass gully systems and underlines the importance of integrating decadal and annual surveys when assessing system trajectory. © 2020 John Wiley & Sons, Ltd.  相似文献   

6.
Recent studies in the Mediterranean area have shown gully erosion to have a very significant contribution to total soil loss. In the Penedès vineyard region (NE Spain), between 15 and 27% of the land is affected by large gullies and gully‐wall retreat seems to be an ongoing process. Multi‐date digital elevation model (DEM) analysis has allowed computation of sediment production by gully erosion, showing that the sediment production rates are very high by the, up‐to‐date, usual global standards. Here, we present a study carried out using large‐scale multi‐date (1975 and 1995) aerial photographs (1 : 5000 and 1 : 7000) to monitor sediment yield caused by large gullies in the Penedès region (NE Spain). High‐resolution DEMs (1 m grid) were derived and analysed by means of geographical information systems techniques to determine the gully erosion rates. Rainfall characteristics within the same study period were also analysed in order to correlate with the soil loss produced. Mass movement was the main process contributing to total sediment production. This process could have been favoured by rainfalls recorded during the period: 58% of the events were of an erosive character and showed high kinetic energy and erosivity. A sediment production rate of 846 ± 40 Mg ha?1 year?1, a sediment deposition rate of 270 ± 18 Mg ha?1 year?1 and a sediment delivery ratio of 68·1% were computed for a gully area of 0·10 km2. The average net erosion within the study period (1975–95) was 576 ± 58 Mg ha?1 year?1. In comparison with other methods, the proposed method also includes sediment produced by processes other than only overland flow, i.e. downcutting, headcutting, and mass movements and bank erosion. Copyright © 2003 John Wiley & Sons, Ltd.  相似文献   

7.
Gully erosion is a major environmental threat on the Moldavian Plateau (MP) of eastern Romania. The permanent gully systems consist of two main gully types. These are: (1) discontinuous gullies, which are mostly located on hillslopes and (2) large continuous gullies in valley bottoms. Very few studies have investigated the evolution of continuous gullies over the medium to longer term. The main objective of this study was to quantitatively analyse the development of continuous gullies over six decades (1961–2020). The article aimed at predicting temporal patterns of gully head erosion based on field data from multiple gullies. Fourteen representative continuous gullies were selected near the town of Barlad, most of them having catchment areas < 500 ha. Linear gully head retreat (LGHR) and areal gully growth (AGG) rates were quantified for six decades. Two main periods were distinguished and compared (i.e., the wet 1961–1980 period and the drier 1981–2020 period). Results indicate that gully erosion rates have significantly decreased since 1981. The mean LGHR of 7.7 m yr−1 over 60 years was accompanied by a mean AGG of 213 m2 yr−1. However, erosion rates between 1961 and 1980 were 4.0 times larger for LGHR and 5.9 times more for AGG compared to those for 1981–2020. Two regression models indicate that annual precipitation depth (P) is the primary controlling factor, explaining 57% of LGHR and 53% of AGG rate. The contributing area (CA) follows, with ~33%. Only 43% of total change in LGHR and 46% of total change in AGG results from rainfall-induced runoff during the warm season. Accordingly, the cold season (with associated freeze–thaw processes and snowmelt runoff) has more impact on gully development. The runoff pattern, when flow enters the trunk gully head, is largely controlled by the upper approaching discontinuous gully.  相似文献   

8.
Gully erosion is a major environmental problem, posing significant threats to sustainable development. However, insights on techniques to prevent and control gullying are scattered and incomplete, especially regarding failure rates and effectiveness. This review aims to address these issues and contribute to more successful gully prevention and control strategies by synthesizing the data from earlier studies. Preventing gully formation can be done through land use change, applying soil and water conservation techniques or by targeted measures in concentrated flow zones. The latter include measures that increase topsoil resistance and vegetation barriers. Vegetation barriers made of plant residues have the advantage of being immediately effective in protecting against erosion, but have a short life expectancy as compared to barriers made of living vegetation. Once deeply incised, the development of gullies may be controlled by diverting runoff away from the channel, but this comes at the risk of relocating the problem. Additional measures such as headcut filling, channel reshaping and headcut armouring can also be applied. To control gully channels, multiple studies report on the use of check dams and/or vegetation. Reasons for failures of these techniques depend on runoff and sediment characteristics and cross-sectional stability and micro-environment of the gully. In turn, these are controlled by external forcing factors that can be grouped into (i) geomorphology and topography, (ii) climate and (iii) the bio-physical environment. The impact of gully prevention and control techniques is addressed, especially regarding their effect on headcut retreat and network development, the trapping of sediment by check dams and reduction of catchment sediment yield. Overall, vegetation establishment in gully channels and catchments plays a key role in gully prevention and control. Once stabilized, gullies may turn into rehabilitated sites of lush vegetation or cropland, making the return on investment to prevent and control gullies high. © 2020 John Wiley & Sons, Ltd.  相似文献   

9.
Although obvious in the field, the impact of road building on hydrology and gullying in Ethiopia has rarely been analysed. This study investigates how road building in the Ethiopian Highlands affects the gully erosion risk. The road between Makalle and Adwa in the highlands of Tigray (northern Ethiopia), built in 1993–1994, caused gullying at most of the culverts and other road drains. While damage by runoff to the road itself remains limited, off‐site effects are very important. Since the building of the road, nine new gullies were created immediately downslope of the studied road segment (6·5 km long) and seven other gullies at a distance between 100 and 500 m more downslope. The road induces a concentration of surface runoff, a diversion of concentrated runoff to other catchments, and an increase in catchment size, which are the main causes for gully development after road building. Topographic thresholds for gully formation are determined in terms of slope gradient of the soil surface at the gully head and catchment area. The influence of road building on both the variation of these thresholds and the modification of the drainage pattern is analysed. The slope gradient of the soil surface at the gully heads which were induced by the road varies between 0·06 and 0·42 m m?1 (average 0·15 m m?1), whereas gully heads without influence of the road have slope gradients between 0·09 and 0·52 m m?1 (average 0·25 m m?1). Road building disturbed the equilibrium in the study area but the lowering of topographic threshold values for gullying is not statistically significant. Increased gully erosion after road building has caused the loss of fertile soil and crop yield, a decrease of land holding size, and the creation of obstacles for tillage operations. Hence roads should be designed in a way that keeps runoff interception, concentration and deviation minimal. Techniques must be used to spread concentrated runoff in space and time and to increase its infiltration instead of directing it straight onto unprotected slopes. Copyright © 2002 John Wiley & Sons, Ltd.  相似文献   

10.
Application of a simple headcut advance model for gullies   总被引：1，自引：0，他引：1       下载免费PDF全文
Gully erosion begins in streambanks and uplands as a consequence of adjustments in driving forces on the landscape imposed by changes in land use or climate. The deleterious effects of gullies worldwide have led to many site‐specific studies of gully form and function. In the continental United States, gully erosion in agricultural land has destroyed valuable farmland yet, prediction of gully processes remains problematic on a national scale. This research has proposed a simple method to predict gully headcut advance. When combined with SWAT hydrologic flow routines, the model predicted gully headcut advance with reasonable accuracy on a daily time step for time periods exceeding two decades. The model was tested in two distinct land resource areas of the United States with differing climate, soils, cover and drainage. The inputs for the headcut model have been kept simple as the model will be applied over large areas. Model inputs consist of headcut height, headcut resistance (based on soil erodibility and a root‐cover factor), and daily flow. The model is compared with an annual time step model used in assessment of headcut advance and appears to offer a better way to assess gully headcut advance. Copyright © 2017 John Wiley & Sons, Ltd.  相似文献   

11.
To quantify spatiotemporal variation in hydraulic properties of bank gully concentrated flow, a series of scour experiments were run under water discharge rates ranging from 30 to 120 l min?1. Concentrated flows were found to be turbulent and supercritical in the upstream catchment area and downstream gully beds. As discharge increased, values of the soil erosion rate, Reynolds number (Re), shear stress, stream power, and flow energy consumption (ΔE) increased while values of the Froude number (Fr) and the Darcy–Weisbach friction factor (resistance f ) did not. With the exception of gully headcut collapse under discharge rates of 60, 90, and 120 l min?1, a declining power function trend (P < 0.05) in the soil erosion rate developed in the upstream catchment area, headcuts, and downstream gully beds. However, increasing trends were observed in temporal variations of hydraulic properties for downstream gully beds and the upstream catchment area. Despite significant differences in temporal variation between the soil erosion rate and hydraulic property values, relative steady state conditions of the soil erosion rate and ΔE were attained following an initial period of adjustment in the upstream catchment area, headcuts, and downstream gully beds under different discharge rates. A logarithmic growth of flow energy consumption per unit soil loss (ΔEu) was observed in bank gullies and the upstream catchment area as the experiment progressed, further illustrating the actual reason behind the discrepancy in temporal variation between soil erosion rates and ΔE. Results demonstrate that ΔE can be used to estimate headcut erosion soil loss, but further quantitative studies are required to quantify coupling effects between hydraulic properties and vertical variation in soil mechanical properties on temporal variation for bank gully soil erosion rates. Copyright © 2015 John Wiley & Sons, Ltd.  相似文献   

12.
Abstract

Gully erosion is considered to be one of the most important soil erosion processes in Mediterranean marly environments, but its actual contribution to total soil loss is still under discussion. The objectives of this paper are: (a) to acquire the distributed value of erosion rate in a permanent gully developed on a marly substratum in a Mediterranean environment; and (b) to quantify the key factors responsible for the spatial and temporal differences in erosion rates observed within the gully. A permanent gully located in Cap Bon (northeastern Tunisia) has been intensively and regularly monitored over a 7-year period with electronic survey equipment (total station) to give five field topographic surveys, as well as hydrological measurements at the gully outlet. The net soil loss for the 7-year period comprised a denudation of 51 m3 of sediment on the gully bank slopes, which corresponds to a mean soil loss of 61 m3 ha?1 year?1 or 6.1 mm year?1. Denudation was observed on bed units with a slope gradient greater than 20%, while the remainder showed deposition. By confirming the factors involved in gully evolution, and by refining the statistical link between factors and erosion rates within the gully, the results provide important information to predict gully erosion rates in Mediterranean marly environments.

Editor Z.W. Kundzewicz; Associate editor G. Mahé

Citation El Khalili, A., Raclot, D., Habaieb, H., and Lamachère, J.M., 2013. Factors and processes of permanent gully evolution in a Mediterranean marly environment (Cape Bon, Tunisia). Hydrological Sciences Journal, 58 (7), 1519–1531.  相似文献   

13.
The objective of this study is to explore in a critical way the potential of high-altitude (stereo) aerial photographs for the assessment of ephemeral gully erosion rates. On 28 May 1995, an intensive rainfall event (30 mm h−1 during 30 min, return period = 3 years) occurred in central Belgium. Ephemeral gullies formed within an area of 218 ha (study area 1) were mapped and measured both in the field and by high-altitude aerial photos taken at the same time. Comparison of these two methods shows that if only one of the two surveying techniques had been used, only 75 per cent of the total ephemeral gully length would have been detected, so that the combination of aerial and field data leads, in fact, to the best possible determination of total gully length within the selected area. A correction factor (C) is proposed, so that the results of an ephemeral gully erosion survey based on high-altitude (stereo) aerial photos can be adjusted for the undetected gullies. Next, a sequential series of high-altitude stereo aerial photographs, taken in six different years, was analysed in order to determine ephemeral gully erosion rates in three selected study areas (study areas 2, 3 and 4). Selection criteria were chosen so that these three areas were similar to study area 1 and representative for the cultivated areas in central Belgium where intense soil erosion regularly occurs. Ephemeral gullies were mapped and their total length was measured from the aerial photos. Using a mean gully cross-section of 0·2635 m2 (determined in study area 1), the average eroded volume is 1·89 m3 ha−1 in six months for study area 1, 0·86 m3 ha−1 in six months for area 2, 1·44 m3 ha−1 in six months for area 3, and 2·37 m3 ha−1 in six months for area 4. According to the correction factor (C), these mean ephemeral gully erosion volumes have to be increased by 44 per cent. The ephemeral gully erosion rates based on high-altitude stereo aerial photos, correspond well with the results of other surveys carried out in the Belgian loess belt. Copyright © 1999 John Wiley & Sons, Ltd.  相似文献   

14.
The morphological consequences of paraglacial modification of valley-side drift slopes are investigated at six sites in Norway. Here, paraglacial slope adjustment operates primarily through the development of gully systems, whereby glacigenic sediment is stripped from the upper drift slope and redeposited in debris cones downslope. This results in an overall lowering of average gradient by up to 4·5° along gully axes. In general, slope profile adjustment appears to be characterized by a convergence of slope profiles towards an ‘equilibrium form’ with an upper rectilinear slope gradient at 29°± 4° and a range of concavities of approximately 0·0 to 0·4. After initial rapid incision, further gully deepening is limited, but gullies become progressively wider as sidewall gradients decline to c. 25°, after which parallel retreat appears to predominate. The final form of mature paraglacial gully systems consists of an upper bedrock-floored source area, a mid-slope area of broad gullies whose sidewalls rest at stable, moderate gradients, and a lower slope zone where gullies discharge onto the surfaces of debris cones and fans. Some gullies appear to have attained this final form and have stabilized following exhaustion of readily entrainable sediment within decades of gully initiation. At most sites, paraglacial activity has transformed steep drift-mantled valley sides into gullied slopes where an average of c. 2–3 m of surface lowering has taken place. At the most active sites, these average amounts imply minimum erosion rates averaging c. 90 mm a−1 since gully initiation, which highlights the extreme rapidity of paraglacial erosion of deglaciated drift-mantled slopes. Copyright © 1999 John Wiley & Sons, Ltd.  相似文献   

15.
This paper describes an analysis of natural and anthropogenic factors controlling the evolution of gullies in a rural basin in the basaltic upland in the State of Rio Grande do Sul, Southern Brazil. In this region of deep ferrallitic soils with more than 60% clay, runoff and erosion are of increasing concern. In the TaboAo drainage basin （100 km^2）, gully erosion was studied in a field survey that measured rills and gullies. Eighty-four gullies were identified. They had an average length of 136 m, were 10 m wide, and 3 m deep and had a volume of 15.458 m3. Each gully was characterised in terms of factors that included slope, geological structure, presence of piping, drainage, soil use, and the presence of surface and subsurface flow. On average, the main channels had knickpoints varying from 2 m to 7 m, and their evolution in the vertical plane increased until bed-rock basalt material was reached, after which gullies increase in width and length. Gully development was also monitored from 1991 to 2003. Subsurface flow appears to be the principal agent controlling their development. Results show that both natural （slope, surface curvature, geological structure and rainfall） and anthropogenic （soil use, road construction） factors are important in gully development. The change in cultural practices throughout the drainage basin from conventional to direct seeding has led to increased subsurface flow, which was more important than surface runoff in causing erosion. However, the higher rainfall during E1 Nifio Southern Oscillation （ENSO） events and the consequently higher subsurface flow were the dominant factors. From 1991 to 2003 a total land loss of 1,013 m3 was observed in one gully, with 236 m^3 lost during the 1992 ENSO and 702 m3 during the 1997 ENSO; 95% of the total volume lost occurred during ENSO periods.  相似文献   

16.
High transmissivity aquifers typically have low hydraulic gradients (i.e., a flat water table). Measuring low gradients using water levels can be problematic because measurement error may be greater than the true difference in water levels (i.e., a low signal-to-noise ratio). In this study, the feasibility of measuring a hydraulic gradient in the range of 10−6 to 10−5 m/m was demonstrated. The study was performed at a site where the depth to water from land surface ranged from 40.1 to 94.2 m and the aquifer transmissivity was estimated at 41,300 m2/d (hydraulic conductivity of 18,800 m/d). The goals of the study were to reduce measurement error as much as practicable and assess the importance of factors affecting water level measurement accuracy. Well verticality was the largest source of error (0.000 to 0.168 m; median of 0.014 m), and geodetic survey of casing elevations was the next most important source of error (0.002 to 0.013 m; median of 0.005 m). Variability due to barometric pressure fluctuations was not an important factor at the site. Hydraulic heads were measured to an accuracy of ±0.0065 m, and the average hydraulic gradient was estimated to be 8.0 × 10−6 (±0.9 × 10−6) m/m. The improvement in accuracy allowed for two reversals in the groundwater flow direction to be identified, after which the gradient averaged 2.5 × 10−5 (±0.4 × 10−5) m/m. This study showed it is possible to sufficiently control sources of error to measure hydraulic gradients in the 10−6 to 10−5 m/m range.  相似文献   

17.
Few models can predict ephemeral gully erosion rates (e.g. CREAMS, EGEM). The Ephemeral Gully Erosion Model (EGEM) was specifically developed to predict soil loss by ephemeral gully erosion. Although EGEM claims to have a great potential in predicting soil losses by ephemeral gully erosion, it has never been thoroughly tested. The objective of this study was to evaluate the suitability of EGEM for predicting ephemeral gully erosion rates in Mediterranean environments. An EGEM‐input data set for 86 ephemeral gullies was collected: detailed measurements of 46 ephemeral gullies were made in intensively cultivated land in southeast Spain (Guadalentin study area) and another 40 ephemeral gullies were measured in both intensively cultivated land and abandoned land in southeast Portugal (Alentejo study area). Together with the assessment of all EGEM‐input parameters, the actual eroded volume for each ephemeral gully was also determined in the field. A very good relationship between predicted and measured ephemeral gully volumes was found (R2 = 0·88). But as ephemeral gully length is an EGEM input parameter, both predicted and measured ephemeral gully volumes have to be divided by this ephemeral gully length in order to test the predictive capability of EGEM. The resulting relationship between predicted and measured ephemeral gully cross‐sections is rather weak (R2 = 0·27). Therefore it can be concluded that EGEM is not capable of predicting ephemeral gully erosion for the given Mediterranean areas. A second conclusion is that ephemeral gully length is a key parameter in determining the ephemeral gully volume. Regression analysis shows that a very significant relation between ephemeral gully length and ephemeral gully volume exists (R2 = 0·91). Accurate prediction of ephemeral gully length is therefore crucial for assessing ephemeral gully erosion rates. Copyright © 2001 John Wiley & Sons, Ltd.  相似文献   

18.
Intensive agricultural land use in the 18th to early 20th centuries on the southeastern Piedmont resulted in substantial soil erosion and gully development. Today, many historically farmed areas have been abandoned and afforested, and such landscapes are an opportunity to study channel network recovery from disturbance by gullying. Channel initiation mapping, watershed area–slope relationships, and field monitoring of flow generation processes are used to identify channel network extent and place it in hydrologic, historical and landscape evolution context. In six study areas in the North Carolina Piedmont, 100 channel heads were mapped in fully‐forested watersheds, revealing a channel initiation relationship of 380 = AS1.27, where A is contributing area (m2) and S is local slope (m/m). Flow in these channels is generated by subsurface and overland flow. The measured relative slope exponent is lower than expected based on literature values of ~2 for forested watersheds with subsurface and overland flow, suggesting that the channel network extent may reflect a former hydrological regime. However, geomorphic evidence of recovery in channel heads within fully forested watersheds is greater than those with present day pasture. Present day channel heads lie within hollows or downslope of unchanneled valleys, which may be remnants of historical gullies, and area–slope relationships provide evidence of colluvial aggradation within the valleys. Channel network extent appears to be sensitive to land use change, with recovery beginning within decades of afforestation. Channel initiation mapping and area–slope relationships are shown to be useful tools for interpreting geomorphic effects of land use change. Copyright © 2012 John Wiley & Sons, Ltd.  相似文献   

19.
We present observations and analysis of gully headcut erosion, which differ from previous headcut studies in both spatial and temporal detail. Using ten terrestrial laser scanning (TLS) surveys conducted over a period of 3 years, we mapped headcut erosion with centimeter‐scale detail on a sub‐annual basis. Erosional change is observed through point cloud differencing, which expands on previous studies of headcut retreat rate by revealing the evolution of the headcut morphology. Headcut retreat observations are combined with hydrological measurements to explore the controlling factors of erosional retreat. We find that (i) mass failure due to wetting, (ii) saturation weakening of shale bedrock in plunge pools, and (iii) direct wash over the headcut face all appear to contribute to headcut retreat; however, mass failure via wetting appears to be the dominant process. Soil moisture was monitored near the study headcut at 0.4 m depth, and time‐lapse photos show that soil wetting tends to be concentrated along the headcut apex after rainfall and snowmelt runoff events. We find that moisture concentration at the headcut apex leads to more rapid erosion at that location than along the headcut sidewalls, resulting in a semi‐ellipsoidal plan view morphology that is maintained as the headcut migrates up‐valley. Copyright © 2015 John Wiley & Sons, Ltd.  相似文献   

20.
Headcut formation and migration was sometimes mistaken as the result of overland flow, without realizing that the headcut was formed and being influenced by flow through soil pipes into the headcut. To determine the effects of the soil pipe and flow through a soil pipe on headcut migration in loessic soils, laboratory experiments were conducted under free drainage conditions and conditions of a perched water table. Soil beds with a 3-cm deep initial headcut were formed in a flume with a 1.5-cm diameter soil pipe 15 cm below the bed surface. Overland flow and flow into the soil pipe was applied at a constant rate of 68 and 1 l min−1 at the upper end of the flume. The headcut migration rate and sediment concentrations in both surface (channel) and subsurface (soil pipe) flows were measured with time. The typical response was the formation of a headcut that extended in depth until an equilibrium scour hole was established, at which time the headcut migrated upslope. Pipeflow caused erosion inside the soil pipe at the same time that runoff was causing a scour hole to deepen and migrate. When the headcut extended to the depth of the soil pipe, surface runoff entering the scour hole interacted with flow from the soil pipe also entering the scour hole. This interaction dramatically altered the headcut processes and greatly accelerated the headcut migration rates and sediment concentrations. Conditions in which a perched water table provided seepage into the soil pipe, in addition to pipeflow, increased the sediment concentration by 42% and the headcut migration rate by 47% compared with pipeflow under free drainage conditions. The time that overland flow converged with subsurface flow was advanced under seepage conditions by 2.3 and 5.0 min compared with free drainage conditions. This study confirmed that pipeflow dramatically accelerates headcut migration, especially under conditions of shallow perched water tables, and highlights the importance of understanding these processes in headcut migration processes. © 2020 John Wiley & Sons, Ltd.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号