共查询到19条相似文献,搜索用时 140 毫秒
1.
2.
本文以管网造价为优化目标,管网拓扑结构为优化参数,管网节点最低可靠度为约束条件,建立了供水管网抗震拓扑优化模型。在供水管网功能可靠性分析方法的基础上,结合单元概率重要度分析方法,利用模拟退火算法提出了供水管网的抗震拓扑优化方法,并对一典型供水管网进行了拓扑优化分析。分析表明,对于管网抗震拓扑优化这样一个组合优化问题,模拟退火算法提供了一类很好的途径,以此为基础进行供水管网抗震可靠性优化设计具有很好的效果。 相似文献
3.
4.
基于GIS的地下管网抗震分析系统 总被引:2,自引:0,他引:2
本文提供了一个地下管道震害快速预测方法,给出了供水管网和供气管网地震影响范围判定分析方法以及关键环节判定方法,完成了一个基于Arc View GIS的多功能的地下管网抗震分析系统的研制。 相似文献
5.
大型城市管网抗震可靠性分析与优化 总被引:3,自引:0,他引:3
本文提出了地震作用下供水系统的渗漏模型,发展了地震后带渗漏管网的流分析技术,结合一次二阶矩方法获得了地震后供水管网的功能可靠度。针对供燃气管网系统则提出了一类高效精确的大型网络抗震连通可靠度分析的概率解析算法———递推分解算法。以上述管网抗震可靠性分析理论为基础,分别发展了基于模拟退火算法的供水系统网络拓扑优化分析理论和基于遗传算法的供燃气网络系统拓扑优化理论。 相似文献
6.
7.
从系统全局出发,以管道单元动态抗震可靠度和震后给水管网各节点的动态自由水压为参数,以优化加固后的管网系统震后水压总降幅最小或系统加固总投入最小为优化目标,对加固方案进行优选,从而给出管网系统的抗震加固优化策略。根据管网系统的功能要求、震害特点,将优化变量转化为较少的离散变量,并利用正交枚举法进行简化计算,从而避免了大规模非线性规划求解的困难,为给水管网的抗震加固优化提供了实用有效的方法。 相似文献
8.
如果管线抗震可靠性已知,关于整个管网的抗震可靠性,即各点在指定烈度水平下相对于某个震害挡次仍可得到供水的概率,前人的工作只做到对节点进行估计。由于管线内点上存在着无以数计的用户或称次级管网,因此,我们必须研究抗震可靠性场分布。这样做不仅可以对父子型管网进行解耦分析,以利于实际课题在时空双向上的分割与联系,而且也可以成为分析兄弟型管网的一种技巧。前者意义自明,对于后者本文以冕宁县城给水管网为例进行分析研究。 相似文献
9.
10.
讨论了给水管网系统震灾的直接经济损失和引发经济损失,分析了影响各类经济损失的因素。基于地震及次生灾害发生的危险性分析及系统抗震可靠性分析,给出了计算各类经济损失的实用方法。 相似文献
11.
12.
13.
Robertas Alzbutas Tomas Iešmantas Mantas Povilaitis Jūratė Vitkutė 《Stochastic Environmental Research and Risk Assessment (SERRA)》2014,28(6):1431-1446
Taking into account a general concept of risk parameters and knowing that natural gas provides very significant portion of energy, firstly, it is important to insure that the infrastructure remains as robust and reliable as possible. For this purpose, authors present available statistical information and probabilistic analysis related to failures of natural gas pipelines. Presented historical failure data is used to model age-dependent reliability of pipelines in terms of Bayesian methods, which have advantages of being capable to manage scarcity and rareness of data and of being easily interpretable for engineers. The performed probabilistic analysis enables to investigate uncertainty and failure rates of pipelines when age-dependence is significant and when it is not relevant. The results of age-dependent modeling and analysis of gas pipeline reliability and uncertainty are applied to estimate frequency of combustions due to natural gas release when pipeline failure occurs. Estimated age-dependent combustion frequency is compared and proposed to be used instead of conservative and age-independent estimate. The rupture of a high-pressure natural gas pipeline can lead to consequences that can pose a significant threat to people and property in the close vicinity to the pipeline fault location. The dominant hazard is combustion and thermal radiation from a sustained fire. The second purpose of the paper is to present the combustion consequence assessment and application of probabilistic uncertainty analysis for modeling of gas pipeline combustion effects. The related work includes performance of the following tasks: to study gas pipeline combustion model, to identify uncertainty of model inputs noting their variation range, and to apply uncertainty and sensitivity analysis for results of this model. The performed uncertainty analysis is the part of safety assessment that focuses on the combustion consequence analysis. Important components of such uncertainty analysis are qualitative and quantitative analysis that identifies the most uncertain parameters of combustion model, assessment of uncertainty, analysis of the impact of uncertain parameters on the modeling results, and communication of the results’ uncertainty. As outcome of uncertainty analysis the tolerance limits and distribution function of thermal radiation intensity are given. The measures of uncertainty and sensitivity analysis were estimated and outcomes presented applying software system for uncertainty and sensitivity analysis. Conclusions on the importance of the parameters and sensitivity of the results are obtained using a linear approximation of the model under analysis. The outcome of sensitivity analysis confirms that distance from the fire center has the greatest influence on the heat flux caused by gas pipeline combustion. 相似文献
14.
基于多层次可拓评价法的城市燃气管线风险评价研究 总被引:1,自引:0,他引:1
以改进的肯特危险指数评分法对城市燃气管道的危险因素进行识分析,确立了城市燃气管线风险评价指标体系。将传统的可拓学方法改进为多层次可拓评价法,对其中的节域物元、关联度和等级评定程序进行了调整,并建立了相应的准则,对评价对象进行多级综合评价。通过多层次评价,可以获得不同子指标各自的风险等级以及评价对象总体的风险等级。以邯郸市某段燃气管线为例,运用城市燃气管线风险评价模型进行风险评价,得出其多层次风险等级值。通过对比及数据分析,证实了本文方法的可靠性。 相似文献
15.
16.
CT图象重建的算法优化和代码优化 总被引:4,自引:1,他引:3
卷积反投影是CT图象重建的最重要算法作为一种线性处理,其基本算法并不复杂,但由于CT的数据量庞大,使得图象重建的计算十分耗时.国外CT大都采用基于64位CPU的工作站并配以专门为CT建象设计的阵列处理板,这种昂贵的造价数十万元的计算机系统对一般医院用户来说是很大的经济负担.相反我们一直采用通用PC工作站,不仅降低了成本,而且计算机可以得到迅速的升级.这样,为满足医院临床诊断和治疗对建象速度的需要,我们就必须对该算法进行优化,优化的效果也成为CT软件能否适应市场需要,能否最终产品化的关键.本文总结了针对CT图象重建分别在算法层次和代码层次上所做的优化工作.第一,在算法实现的层次上,(1)在反投影算法中,进行内外循环交换,将最内层循环的计算量最大限度地减少,(2)利用反投影算法的对称性,只计算出部分图象数据并对称得到其它图象数据,(3)根据不同的视野范围自动调整反投影的计算量,(4)充分利用FFT的特点,提高实数线性卷积的效率.(5)数据的行列交换,用于提高CPU对数据的存取速度.第二,在代码编程的层次上,充分利用新一代微机CPU--Pentium III提供的新资源、新指令和相应的代码优化工具软件,重新编写算法关键部分的程序代码,以提高程序的实际执行效率.在东大阿尔派全身CT扫描机CT-C2000上的实际测试表明,通过上述算法优化和代码优化,CT图象重建软件的运行速度提高了8倍以上,己达到了医院实际使用的要求. 相似文献
17.
在结构优化的目标函数中,不仅应考虑结构造价,而且应考虑结构服役期的损失期望。为此,我们定义了抗震结构模糊可靠度的概念。利用抗震设计原则和地震危险性分析给出了一个计算模糊可靠度的方法。然后提出了三步优化法;第一步,寻求一系列对应于不同设防烈度的最小造价设计;第二步,同时考虑造价和地震引起的损失期望,寻求最优设防烈度;第三步,寻找相应于此最优烈度的最小造价设计。 相似文献
18.
19.
There are many traditional methods to find the optimum parameters of a tuned mass damper (TMD) subject to stationary base excitations. It is very difficult to obtain the optimum parameters of a TMD subject to non‐stationary base excitations using these traditional optimization techniques. In this paper, by applying particle swarm optimization (PSO) algorithm as a novel evolutionary algorithm, the optimum parameters including the optimum mass ratio, damper damping and tuning frequency of the TMD system attached to a viscously damped single‐degree‐of‐freedom main system subject to non‐stationary excitation can be obtained when taking either the displacement or the acceleration mean square response, as well as their combination, as the cost function. For simplicity of presentation, the non‐stationary excitation is modeled by an evolutionary stationary process in the paper. By means of three numerical examples for different types of non‐stationary ground acceleration models, the results indicate that PSO can be used to find the optimum mass ratio, damper damping and tuning frequency of the non‐stationary TMD system, and it is quite easy to be programmed for practical engineering applications. Copyright © 2008 John Wiley & Sons, Ltd. 相似文献