首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
The lack of magnetic anomalies within the giant martian impact basins, Hellas, Argyre, and Isidis suggests that the impacts demagnetized the crust. Our analysis of the magnetic anomaly intensity shows that the interior parts of the basins are completely demagnetized, while the outer parts and surroundings are partially demagnetized. We investigate the shock pressure and impact heating resulting from the impacts. The crust has been completely demagnetized within ∼0.8 basin radius by a combination of thermal and shock effects, and the surroundings have been partially demagnetized by shock to a distance of at least 1.4 radii. We also investigate magnetic signatures of intermediate-size craters. From the pressures generated by both the large and intermediate-sized impacts, we conclude that the remanent magnetization is carried at least in part by high coercivity rocks. Since the crust beneath the basins does not appear to have been remagnetized as it cooled following the impacts, we conclude that the martian core dynamo was inactive or very weak for at least 100 Myr following the Hellas impact.  相似文献   

2.
Recent observations of the surface of Mars have shown several fresh mid-latitude craters. Some of these craters show exposed ice (Byrne, S. et al. [2009]. Science 325, 1674-1676.). In some craters, albedo of ice slowly decreases, while in others, it remains nearly constant. We attempt to determine influence of the regolith structure on the rate of sublimation of ice. For this purpose we performed numerical simulations describing evolution of the exposed ice in model craters located at middle latitudes.We consider a new model for the structure and evolution of the material at- and beneath the crater floors. In contrast to the previous study by Dundas and Byrne (Dundas, C.M., Byrne, S. [2010]. Icarus 206, 716-728.) we do not investigate sublimation of dirty ice, and the related formation of a sublimation lag. Instead, we consider sublimation of a pure ice layer on top of layered regolith. In our model the observed reflectivity decreases due to the sublimation-driven changes of the optical properties of thinning clean ice. This offers an alternative to the deposition of the dust embedded in ice (sublimation lag).We have shown that in our model among many parameters affecting ice sublimation rate, volumetric fraction of water ice in the subsurface beneath the crater has the strongest influence. Hence observed darkening of the ice patch on the crater floor might be sufficient to determine the content of water ice in the subsurface. Our calculations show that an albedo decrease of fresh ice patches in mid-latitude craters can be explained by either strong dust sedimentation or, if this is excluded, by sublimation of a thin layer of water ice from the regolith with large thermal inertia. This is consistent with a large volumetric fraction of water ice beneath the crater floor and contributes to evidence for an extended subsurface water reservoir on Mars.The overall conclusion of our work is that a thin post-impact surface ice coating over ice-rich ground beneath the crater floors is consistent with the observations.  相似文献   

3.
It is investigated whether conditions for melting can be temporarily created in the upper sub-surface parts of snow/ice-packs on Mars at subzero surface temperatures by means of the solid-state greenhouse effect, as occurs in snow- and ice-covered regions on Earth. The conditions for this possible temporary melting are quantitatively described for bolometric albedo values A = 0.8 and A = 0.2, and with model parameters typical for the thermo-physical conditions at snow/ice sites on the surface of present Mars. It is demonstrated by numerical modelling that there are several sets of parameters which will lead to development of layers of liquid water just below the top surface of snow- and ice-packs on Mars. This at least partial liquefaction occurs repetitively (e.g. diurnally, seasonally), and can in some cases lead to liquid water persisting through the night-time in the summer season. This liquid water can form in sufficient amounts to be relevant for macroscopic physical (rheology, erosion), for chemical, and eventually also for biological processes. The creation of temporary pockets of sub-surface water by this effect requires pre-existing snow or ice cover, and thus is more likely to take place at high latitudes, since the present deposits of snow/ice can mainly be found there. Possible rheologic and related erosion consequences of the appearance of liquid sub-surface water in martian snow/ice-packs are discussed in view of current observations of recent rheologic processes.  相似文献   

4.
With widespread evidence of both heat sources and water (either liquid or solid), hydrothermal systems are likely to have existed on Mars. We model hydrothermal systems in two sizes of fresh impact craters, one simple and one complex, and find that a hydrothermal system forms on the crater floor. In the larger complex craters with a substantial melt sheet, a lake can form, even under current martian atmospheric conditions. By comparing these hydrothermal systems to those that exist and have been studied extensively on the Earth, we make predictions as to the types of minerals that could be precipitated and the potential habitability of such systems by primitive organisms.  相似文献   

5.
Experiments have been performed to simulate the shallow ascent and surface release of water and brines under low atmospheric pressure. Atmospheric pressure was treated as an independent variable and water temperature and vapor pressure were examined as a function of total pressure variation down to low pressures. The physical and thermal responses of water to reducing pressure were monitored with pressure transducers, temperature sensors and visible imaging. Data were obtained for pure water and for solutions with dissolved NaCl or CO2. The experiments showed the pressure conditions under which the water remained liquid, underwent a rapid phase change to the gas state by boiling, and then solidified because of removal of latent heat. Liquid water is removed from phase equilibrium by decompression. Solid, liquid and gaseous water are present simultaneously, and not at the 611 Pa triple point, because dynamic interactions between the phases maintain unstable temperature gradients. After phase changes stop, the system reverts to equilibrium with its surroundings. Surface and shallow subsurface pressure conditions were simulated for Mars and the icy satellites of the outer Solar System. Freezing by evaporation in the absence of wind on Mars is shown to be unlikely for pure water at pressures greater than c. 670 Pa, and for saline solutions at pressures greater than c. 610 Pa. The physical nature of ice that forms depends on the salt content. Ice formed from saline water at pressures less than c. 610 Pa could be similar to terrestrial sea ice. Ice formed from pure water at pressures less than c. 100 Pa develops a low thermal conductivity and a ‘honeycomb’ structure created by sublimation. This ice could have a density as low as c. 450 kg m−3 and a thermal conductivity as low as 1.6 W m−1 K−1, and is highly reflective, more akin to snow than the clear ice from which it grew. The physical properties of ice formed from either pure or saline water at low pressures will act to reduce the surface temperature, and hence rate of sublimation, thereby prolonging the lifespan of any liquid water beneath.  相似文献   

6.
New three-dimensional hydrodynamic simulations of hypervelocity impacts into the crust of Titan were undertaken to determine the fraction of liquid water generated on the surface of Saturn's largest moon over its history and, hence, the potential for surface—modification of hydrocarbons and nitriles by exposure to liquid water. We model in detail an individual impact event in terms of ejecta produced and melt generated, and use this to estimate melt production over Titan's history, taking into account the total flux of the impactors and its decay over time. Our estimates show that a global melt layer at any time after the very beginning of Titan's history is improbable; but transient melting local to newly formed craters has occurred over large parts of the surface. Local maxima of the melt are connected with the largest impact events. We also calculate the amount of volatiles delivered at the impact with various impact velocities (from 3 km/s for possible Hyperion fragments to 11 km/s for Jupiter family comets) and their retention as a possible source of Titan's atmosphere. We find the probability of impact ejecta escaping Titan with its modern dense and thick atmosphere is rather low, and dispersal of Titan organics throughout the rest of the Solar System requires impactors tens of kilometers in diameter. Water ice melting and exposure of organics to liquid water has been widespread because of impacts, but burial or obscuration of craters by organic deposits or cryovolcanism is aided by viscous relaxation. The largest impactors may breach an ammonia-water mantle layer, creating a circular albedo contrast rather than a crater.  相似文献   

7.
The ejecta blankets of impact craters in volatile‐rich environments often possess characteristic layered ejecta morphologies. The so‐called double‐layered ejecta (DLE) craters are characterized by two ejecta layers with distinct morphologies. The analysis of high‐resolution image data, especially HiRISE and CTX, provides new insights into the formation of DLE craters. A new phenomenological excavation and ejecta emplacement model for DLE craters is proposed based on a detailed case study of the Martian crater Steinheim—a well‐preserved DLE crater—and studies of other DLE craters. The observations show that the outer ejecta layer is emplaced as medial and distal ejecta that propagate outwards in a debris avalanche or (if saturated with water) a debris flow mode after landing, overrunning previously formed secondary craters. In contrast, the inner ejecta layer is formed by a translational slide of the proximal ejecta deposits during the emplacement stage that overrun and superimpose parts of the outer ejecta layer. Based on our model, DLE craters on Mars are the result of an impact event into a rock/ice mixture that produces large amounts of shock‐induced vaporization and melting of ground ice, leading to high ejection angles, proximal landing positions, and an ejecta curtain with relatively wet (in terms of water in liquid form) composition in the distal part versus dryer composition in the proximal part. As a consequence, basal melting of ice components in the ejecta at the transient crater rim, which is induced by frictional heating and the enhanced pressure at depth, initiates an outwards directed collapse of crater rim material in a translational slide mode. Our results indicate that similar processes may also be applicable for other planetary bodies with volatile‐rich environments, such as Ganymede, Europa, and the Earth.  相似文献   

8.
Self-organised patterns of stone stripes, polygons, circles and clastic solifluction lobes form by the sorting of clasts from fine-grained sediments in freeze-thaw cycles. We present new High Resolution Imaging Science Experiment (HiRISE) images of Mars which demonstrate that the slopes of high-latitude craters, including Heimdal crater - just 25 km east of the Phoenix Landing Site - are patterned by all of these landforms. The order of magnitude improvement in imaging data resolution afforded by HiRISE over previous datasets allows not only the reliable identification of these periglacial landforms but also shows that high-latitude fluviatile gullies both pre- and post-date periglacial patterned ground in several high-latitude settings on Mars. Because thaw is inherent to the sorting processes that create these periglacial landforms, and from the association of this landform assemblage with fluviatile gullies, we infer the action of liquid water in a fluvio-periglacial context. We conclude that these observations are evidence of the protracted, widespread action of thaw liquids on and within the martian regolith. Moreover, the size frequency statistics of superposed impact craters demonstrate that this freeze-thaw environment is, at least in Heimdal crater, less than a few million years old. Although the current martian climate does not favour prolonged thaw of water ice, observations of possible liquid droplets on the strut of the Phoenix Lander may imply significant freezing point depression of liquids sourced in the regolith, probably driven by the presence of perchlorates in the soil. Because perchlorates have eutectic temperatures below 240 K and can remain liquid at temperatures far below the freezing point of water we speculate that freeze-thaw involving perchlorate brines provides an alternative “low-temperature” hypothesis to the freeze-thaw of more pure water ice and might drive significant geomorphological work in some areas of Mars. Considering the proximity of Heimdal crater to the Phoenix Landing Site, the presence of such hydrated minerals might therefore explain the landforms described here. If this is the case then the geographical distribution of martian freeze-thaw landforms might reflect relatively high temperatures (but still below 273 K) and the locally elevated concentration of salts in the regolith.  相似文献   

9.
This study presents an automated system for cataloging impact craters using the MOLA 128 pixels/degree digital elevation model of Mars. Craters are detected by a two-step algorithm that first identifies round and symmetric topographic depressions as crater candidates and then selects craters using a machine-learning technique. The system is robust with respect to surface types; craters are identified with similar accuracy from all different types of martian surfaces without adjusting input parameters. By using a large training set in its final selection step, the system produces virtually no false detections. Finally, the system provides a seamless integration of crater detection with its characterization. Of particular interest is the ability of our algorithm to calculate crater depths. The system is described and its application is demonstrated on eight large sites representing all major types of martian surfaces. An evaluation of its performance and prospects for its utilization for global surveys are given by means of detailed comparison of obtained results to the manually-derived Catalog of Large Martian Impact Craters. We use the results from the test sites to construct local depth-diameter relationships based on a large number of craters. In general, obtained relationships are in agreement with what was inferred on the basis of manual measurements. However, we have found that, in Terra Cimmeria, the depth/diameter ratio has an abrupt decrease at ∼38°S regardless of crater size. If shallowing of craters is attributed to presence of sub-surface ice, a sudden change in its spatial distribution is suggested by our findings.  相似文献   

10.
The rayed crater Zunil and interpretations of small impact craters on Mars   总被引：1，自引：0，他引：1  
A 10-km diameter crater named Zunil in the Cerberus Plains of Mars created ∼107 secondary craters 10 to 200 m in diameter. Many of these secondary craters are concentrated in radial streaks that extend up to 1600 km from the primary crater, identical to lunar rays. Most of the larger Zunil secondaries are distinctive in both visible and thermal infrared imaging. MOC images of the secondary craters show sharp rims and bright ejecta and rays, but the craters are shallow and often noncircular, as expected for relatively low-velocity impacts. About 80% of the impact craters superimposed over the youngest surfaces in the Cerberus Plains, such as Athabasca Valles, have the distinctive characteristics of Zunil secondaries. We have not identified any other large (?10 km diameter) impact crater on Mars with such distinctive rays of young secondary craters, so the age of the crater may be less than a few Ma. Zunil formed in the apparently youngest (least cratered) large-scale lava plains on Mars, and may be an excellent example of how spallation of a competent surface layer can produce high-velocity ejecta (Melosh, 1984, Impact ejection, spallation, and the origin of meteorites, Icarus 59, 234-260). It could be the source crater for some of the basaltic shergottites, consistent with their crystallization and ejection ages, composition, and the fact that Zunil produced abundant high-velocity ejecta fragments. A 3D hydrodynamic simulation of the impact event produced 1010 rock fragments ?10 cm diameter, leading to up to 109 secondary craters ?10 m diameter. Nearly all of the simulated secondary craters larger than 50 m are within 800 km of the impact site but the more abundant smaller (10-50 m) craters extend out to 3500 km. If Zunil is representative of large impact events on Mars, then secondaries should be more abundant than primaries at diameters a factor of ∼1000 smaller than that of the largest primary crater that contributed secondaries. As a result, most small craters on Mars could be secondaries. Depth/diameter ratios of 1300 small craters (10-500 m diameter) in Isidis Planitia and Gusev crater have a mean value of 0.08; the freshest of these craters give a ratio of 0.11, identical to that of fresh secondary craters on the Moon (Pike and Wilhelms, 1978, Secondary-impact craters on the Moon: topographic form and geologic process, Lunar Planet. Sci. IX, 907-909) and significantly less than the value of ∼0.2 or more expected for fresh primary craters of this size range. Several observations suggest that the production functions of Hartmann and Neukum (2001, Cratering chronology and the evolution of Mars, Space Sci. Rev. 96, 165-194) predict too many primary craters smaller than a few hundred meters in diameter. Fewer small, high-velocity impacts may explain why there appears to be little impact regolith over Amazonian terrains. Martian terrains dated by small craters could be older than reported in recent publications.  相似文献   

11.
The morphology of impact craters on the icy Galilean satellites differs from craters on rocky bodies. The differences are thought due to the relative weakness of ice and the possible presence of sub-surface water layers. Digital elevation models constructed from Galileo images were used to measure a range of dimensions of craters on the dark and bright terrains of Ganymede. Measurements were made from multiple profiles across each crater, so that natural variation in crater dimensions could be assessed and averaged scaling trends constructed. The additional depth, slope and volume information reported in this work has enabled study of central peak formation and development, and allowed a quantitative assessment of the various theories for central pit formation. We note a possible difference in the size-morphology progression between small craters on icy and silicate bodies, where central peaks occur in small craters before there is any slumping of the crater rim, which is the opposite to the observed sequence on the Moon. Conversely, our crater dimension analyses suggest that the size-morphology progression of large lunar craters from central peak to peak-ring is mirrored on Ganymede, but that the peak-ring is subsequently modified to a central pit morphology. Pit formation may occur via the collapse of surface material into a void left by the gradual release of impact-induced volatiles or the drainage of impact melt into sub-crater fractures.  相似文献   

12.
We compare three previously independently studied crater morphologies - excess ejecta craters, perched craters, and pedestal craters - each of which has been proposed to form from impacts into an ice-rich surface layer. Our analysis identifies the specific similarities and differences between the crater types; the commonalities provide significant evidence for a genetic relationship among the morphologies. We use new surveys of excess ejecta and perched craters in the southern hemisphere in conjunction with prior studies of all of the morphologies to create a comprehensive overview of their geographic distributions and physical characteristics. From these analyses, we conclude that excess ejecta craters and perched craters are likely to have formed from the same mechanism, with excess ejecta craters appearing fresh while perched craters have experienced post-impact modification and infilling. Impacts that led to these two morphologies overwhelmed the ice-rich layer, penetrating into the underlying martian regolith, resulting in the excavation of rock that formed the blocky ejecta necessary to armor the surface and preserve the ice-rich deposits. Pedestal craters, which tend to be smaller in diameter, have the same average deposit thickness as excess ejecta and perched craters, and form in the same geographic regions. They rarely have ejecta around their crater rims, instead exhibiting a smooth pedestal surface. We interpret this to mean that they form from impacts into the same type of ice-rich paleodeposit, but that they do not penetrate through the icy surface layer, and thus do not generate a blocky ejecta covering. Instead, a process related to the impact event appears to produce a thin, indurated surface lag deposit that serves to preserve the ice-rich material. These results provide a new basis to identify the presence of Amazonian non-polar ice-rich deposits, to map their distribution in space and time, and to assess Amazonian climate history. Specifically, the ages, distribution and physical attributes of the crater types suggest that tens to hundreds of meters of ice-rich material has been episodically emplaced at mid latitudes in both hemispheres throughout the Amazonian due to obliquity-driven climate variations. These deposits likely accumulated more frequently in the northern lowlands, resulting in a larger population of all three crater morphologies in the northern hemisphere.  相似文献   

13.
Hale crater, a 125 × 150 km impact crater located near the intersection of Uzboi Vallis and the northern rim of Argyre basin at 35.7°S, 323.6°E, is surrounded by channels that radiate from, incise, and transport material within Hale’s ejecta. The spatial and temporal relationship between the channels and Hale’s ejecta strongly suggests the impact event created or modified the channels and emplaced fluidized debris flow lobes over an extensive area (>200,000 km2). We estimate ∼1010 m3 of liquid water was required to form some of Hale’s smaller channels, a volume we propose was supplied by subsurface ice melted and mobilized by the Hale-forming impact. If 10% of the subsurface volume was ice, based on a conservative porosity estimate for the upper martian crust, 1012 m3 of liquid water could have been present in the ejecta. We determine a crater-retention age of 1 Ga inside the primary cavity, providing a minimum age for Hale and a time at which we propose the subsurface was volatile-rich. Hale crater demonstrates the important role impacts may play in supplying liquid water to the martian surface: they are capable of producing fluvially-modified terrains that may be analogous to some landforms of Noachian Mars.  相似文献   

14.
Abstract— Ice thickness estimates and impactor dynamics indicate that some impacts must breach Europa's ice crust; and outcomes of impact experiments using ice‐over‐water targets range from simple craters to chaos‐like destroyed zones, depending on impact energy and ice competence. First‐order impacts‐into thick ice or at low impact energy‐produce craters. Second‐order impacts punch through the ice, making holes that resemble raft‐free chaos areas. Third‐order impacts‐into thinnest ice or at highest energy‐produce large irregular raft‐filled zones similar to platy chaos. Other evidence for an impact origin for chaos areas comes from the size‐frequency distribution of chaos+craters on Europa, which matches the impact production functions of Ganymede and Callisto; and from small craters around the large chaos area Thera Macula, which decrease in average size and density per unit area as a function of distance from Thera's center. There are no tiny chaos areas and no craters >50 km diameter. This suggests that small impactors never penetrate, whereas large ones (ÜberPenetrators: >2.5 km diameter at average impact velocity) always do. Existence of both craters and chaos areas in the size range 2–40 km diameter points to spatial/temporal variation in crust thickness. But in this size range, craters are progressively outnumbered by chaos areas at larger diameters, suggesting that probability of penetration increases with increasing scale of impact. If chaos areas do represent impact sites, then Europa's surface is older than previously thought. The recalculated resurfacing age is 480 (‐302/+960) Ma: greater than prior estimates, but still very young by solar system standards.  相似文献   

15.
Many bodies in the outer solar system are theorized to have an ice shell with a different subsurface material below, be it chondritic, regolith, or a subsurface ocean. This layering can have a significant influence on the morphology of impact craters. Accordingly, we have undertaken laboratory hypervelocity impact experiments on a range of multilayered targets, with interiors of water, sand, and basalt. Impact experiments were undertaken using impact speeds in the range of 0.8–5.3 km s?1, a 1.5 mm Al ball bearing projectile, and an impact incidence of 45°. The surface ice crust had a thickness between 5 and 50 mm, i.e., some 3–30 times the projectile diameter. The thickness of the ice crust as well as the nature of the subsurface layer (liquid, well consolidated, etc.) have a marked effect on the morphology of the resulting impact crater, with thicker ice producing a larger crater diameter (at a given impact velocity), and the crater diameter scaling with impact speed to the power 0.72 for semi‐infinite ice, but with 0.37 for thin ice. The density of the subsurface material changes the structure of the crater, with flat crater floors if there is a dense, well‐consolidated subsurface layer (basalt) or steep, narrow craters if there is a less cohesive subsurface (sand). The associated faulting in the ice surface is also dependent on ice thickness and the substrate material. We find that the ice layer (in impacts at 5 km s?1) is effectively semi‐infinite if its thickness is more than 15.5 times the projectile diameter. Below this, the crater diameter is reduced by 4% for each reduction in ice layer thickness equal to the impactor diameter. Crater depth is also affected. In the ice thickness region, 7–15.5 times the projectile diameter, the crater shape in the ice is modified even when the subsurface layer is not penetrated. For ice thicknesses, <7 times the projectile diameter, the ice layer is breached, but the nature of the resulting crater depends heavily on the subsurface material. If the subsurface is noncohesive (loose) material, a crater forms in it. If it is dense, well‐consolidated basalt, no crater forms in the exposed subsurface layer.  相似文献   

16.
The positive identification of the Rock Elm impact structure (Wisconsin, USA) and the Upheaval Dome (Utah, USA) as impact craters was complicated by a lack of distinctive shock features in the record. Low‐impedance surface layers over high‐impedance bedrock affect energy coupling and shock effects in the substrate; in both cases, removal of surface sediments erased most of the original impact structures, thereby making identification of the impact origin difficult. In this study, a combination of laboratory and 3‐D numerical experiments reveals the underlying processes controlling subsurface deformation and demonstrates that a low‐impedance layer can reduce expression of peak shock pressures left in the rock record, as at the Rock Elm and the Upheaval Dome impact sites. 3‐D CTH models of the Rock Elm impact structure predict that peak shock pressures should fall below the hugoniot elastic limit of quartz in the basement rocks, yet still induce permanent deformation. The model predicts peak pressures around 5–10 GPa, levels consistent with field observations of shocked quartz from both Rock Elm and the Upheaval Dome. Consequently, other impact sites exhibiting minimal shock features might be explained.  相似文献   

17.
Abstract— Imaging of asteroids Gaspra and Ida and laboratory studies of asteroidal meteorites show that impacts undoubtedly played an important role in the histories of asteroids and resulted in shock metamorphism and the formation of breccias and melt rocks. However, in recent years, impact has also been called upon by numerous authors as the heat source for some of the major geological processes that took place on asteroids, such as global thermal metamorphism of chondrite parent bodies and a variety of melting and igneous events. The latter were proposed to explain the origin of ureilites, aubrites, mesosiderites, the Eagle Station pallasites, acapulcoites, lodranites, and the IAB, IIICD, and HE irons. We considered fundamental observations from terrestrial impact craters, combined with results from laboratory shock experiments and theoretical considerations, to evaluate the efficiency of impact heating and melting of asteroids. Studies of terrestrial impact craters and relevant shock experiments suggest that impact heating of asteroids will produce two types of impact melts: (1) large-scale whole rock melts (total melts, not partial melts) at high shock pressure and (2) localized melts formed at the scale of the mineral constituents (mineral specific or grain boundary melting) at intermediate shock pressures. The localized melts form minuscule amounts of melt that quench and solidify in situ, thus preventing them from pooling into larger melt bodies. Partial melting as defined in petrology has not been observed in natural and experimental shock metamorphism and is thermodynamically impossible in a shock wave-induced transient compression of rocks. The total impact melts produced represent a minuscule portion of the displaced rock volume of the parent crater. Internal differentiation by fractional crystallization is absent in impact melt sheets of craters of sizes that can be tolerated by asteroids, and impact melt rocks are usually clast-laden. Thermal metamorphism of country rocks by impact is extremely minor. Experimental and theoretical considerations suggest that (1) single disruptive impacts cannot raise the average global temperature of strength- or gravity-dominated asteroids by more than a few degrees; (2) cumulative global heating of asteroids by multiple impacts is ineffective for asteroids less than a few hundred kilometers in diameter; (3) small crater size, low gravity, and low impact velocity suggest that impact melt volume in single asteroidal impacts is a very small (0.01–0.1%) fraction of the total displaced crater volume; (4) total impact melt volume formed during the typical lifetime of an asteroid is a small fraction (<0.001) of the volume of impact-generated debris; and (5) much of the impact melt generated on asteroidal targets is ejected from craters with velocities greater than escape velocity and, thus, not retained on the asteroid. The inescapable conclusion from these observations and calculations is that impacts cannot have been the heat source for the origin of the meteorite types listed above, and we must turn to processes other than impact, such as decay of short-lived radionuclides or electromagnetic induction during an early T-tauri phase of the Sun to explain heating and melting of the parent bodies of these meteorites.  相似文献   

18.
Microscopic liquid layers of water can evolve via adsorption on grain and mineral surfaces at and in the soil of the surface of Mars. The upper parts of these layers will start to freeze at temperatures clearly below the freezing point of bulk water (freezing point depression). A sandwich structure with layers of ice (top), liquid water (in between) and mineral surface (bottom) can evolve. The properties of the interfacial water (of adsorption water and premelted ice) on grain surfaces are described by a sandwich-model of a layer of liquid-like adsorption water between the adsorbing mineral surface layer and an upper ice layer. It is shown that the thickness or number of mono-layers of the interfacial water (of adsorption water and premelted ice) depends on temperature and atmospheric relative humidity. The derived equations for the sandwich model fit well to a known phenomenological relation between thickness of the liquid layer and relative humidity, and can be a tool to estimate or to determine for appropriate materials Hamaker's constant for van der Waals interactions on grains and in porous media. The curvature of grain surfaces is shown to have no remarkable effects for particles in the μm-range and larger. The application of these equations to thermo-physical conditions on Mars shows that the thickness of frost-layers, which can evolve over several hours on cooling surface parts of Mars, is typically of the order or a few tenths of one millimeter or less. This is in agreement with observations. Furthermore, an equation is derived, which relates the freezing point depression for van der Waals force governed interfacial water to the value of the Hamaker constant, to the latent heat of solidification, to the mass density of water ice, and to the thickness of the liquid-like layer. Again, this equation fits well to a known phenomenological relation between freezing point depression and thickness of the liquid-like layer. The derived equation shows that the lower limiting temperature of the liquid phase can reach about 180 K under martian conditions having an atmospheric water content of around 10 pr μm. An “Equilibrium Moisture Content” (EMC)/“Equilibrium Relative Humidity” (ERH) relation for the water content of martian soil has been derived, which relates, for equilibrium conditions, soil water content and atmospheric relative humidity. This relation indicates that the content of liquid interfacial water in the upper surface of Mars can reach up to 10% by weight and more in course of saturation during night hours, and it can be of about 2% by weight during the dry daytime hours.  相似文献   

19.
In this work we consider when and how much liquid water during present climate is possible within the gullies observed on the surface of Mars. These features are usually found on poleward directed slopes. We analyse the conditions for melting of H2O ice, which seasonally condenses within the gullies. We follow full annual cycle of condensation and sublimation of atmospheric CO2 and H2O, accounting for the heat and mass transport in the soil. During the summer, once the facets of the gullies are exposed to the Sun the water ice can melt and evaporate. Two mid latitude locations in both hemispheres are considered. The model includes both the rough geometry of the gullies as well as the slope of the surface where the gullies appear. It is an extension of the model developed to calculate condensation of CO2 ice in troughs of different sizes, including polygonal features on Mars (Kossacki and Markiewicz, 2002, Icarus 160, 73; Kossacki et al., 2003, Planet. Space Sci. 51, 569). We have found, that water ice accumulated during winter can undergo transition to the liquid phase after complete sublimation of CO2 ice. The amount of liquid water depends on water content in the atmosphere and on the local wind speed. It is probably not enough to destabilise the slope and cause flow of the surface material. However, even the small amounts of liquid water predicted, can play an important role in surface chemistry, in increasing the cohesive strength of the soil's surface layer and possibly may have some exobiological implications.  相似文献   

20.
In springtime on HiRISE images of the Southern polar terrain of Mars flow-like or rheologic features were observed. Their dark color is interpreted as partly defrosted surface where the temperature is too high for CO2 but low enough for H2O ice to be present there. These branching streaks grow in size and can move by an average velocity of up to about 1 m/day and could terminate in pond-like accumulation features. The phenomenon may be the result of interfacial water driven rheologic processes. Liquid interfacial water can in the presence of water ice exist well below the melting point of bulk water, by melting in course of interfacial attractive pressure by intermolecular forces (van der Waals forces e.g.), curvature of water film surfaces, and e.g. by macroscopic weight, acting upon ice. This melting phenomenon can be described in terms of “premelting of ice”. It is a challenging consequence, that liquid interfacial water unavoidably must in form of nanometric layers be present in water ice containing soil in the subsurface of Mars. It is the aim of this paper to study possible rheologic consequences in relation to observations, which seem to happen at sites of dark polar dunes on Mars at present. The model in this work assumes that interfacial water accumulates at the bottom of a translucent water-ice layer above a dark and insolated ground. This is warmed up towards the melting point of water. The evolving layer of liquid interfacial water between the covering ice sheet and the heated ground is assumed to drive downward directed flow-like features on slopes, and it can, at least partially, infiltrate (seep) into a porous ground. There, in at least temporarily cooler subsurface layers, the infiltrated liquid water refreezes and forms ice. The related stress built-up is shown to be sufficient to cause destructive erosive processes. The above-mentioned processes may cause change in the structure and thickness of the covering ice and/or may cause the movement of dune grains. All these processes may explain the observed springtime growing and downward extension of the slope streaks analyzed here.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号