首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 109 毫秒
1.
Climate models are increasingly being used to force dynamical wind wave models in order to assess the potential climate change-driven variations in wave climate. In this study, an ensemble of wave model simulations have been used to assess the ability of climate model winds to reproduce the present-day (1981–2000) mean wave climate and its seasonal variability for the southeast coast of Australia. Surface wind forcing was obtained from three dynamically downscaled Coupled Model Intercomparison Project (CMIP-3) global climate model (GCM) simulations (CSIRO Mk3.5, GFDLcm2.0 and GFDLcm2.1). The downscaling was performed using CSIRO’s cubic conformal atmospheric model (CCAM) over the Australian region at approximately 60-km resolution. The wind climates derived from the CCAM downscaled GCMs were assessed against observations (QuikSCAT and NCEP Re-analysis 2 (NRA-2) reanalyses) over the 1981–2000 period and were found to exhibit both bias in mean wind conditions (climate bias) as well as bias in the variance of wind conditions (variability bias). Comparison of the modelled wave climate with over 20 years of wave data from six wave buoys in the study area indicates that direct forcing of the wave models with uncorrected CCAM winds result in suboptimal wave hindcast. CCAM winds were subsequently adjusted for climate and variability bias using a bivariate quantile adjustment which corrects both directional wind components to align in distribution to the NRA-2 winds. Forcing of the wave models with bias-adjusted winds leads to a significant improvement of the hindcast mean annual wave climate and its seasonal variability. However, bias adjustment of the CCAM winds does not improve the ability of the model to reproduce the storm wave climate. This is likely due to a combination of storm systems tracking too quickly through the wave generation zone and the performance of the NRA-2 winds used as a benchmark in this study.  相似文献   

2.
In this paper, we investigate changes in the wave climate of the west-European shelf seas under global warming scenarios. In particular, climate change wind fields corresponding to the present (control) time-slice 1961–2000 and the future (scenario) time-slice 2061–2100 are used to drive a wave generation model to produce equivalent control and scenario wave climate. Yearly and seasonal statistics of the scenario wave climates are compared individually to the corresponding control wave climate to identify relative changes of statistical significance between present and future extreme and prevailing wave heights. Using global, regional and linked global–regional wind forcing over a set of nested computational domains, this paper further demonstrates the sensitivity of the results to the resolution and coverage of the forcing. It suggests that the use of combined forcing from linked global and regional climate models of typical resolution and coverage is a good option for the investigation of relative wave changes in the region of interest of this study. Coarse resolution global forcing alone leads to very similar results over regions that are highly exposed to the Atlantic Ocean. In contrast, fine resolution regional forcing alone is shown to be insufficient for exploring wave climate changes over the western European waters because of its limited coverage. Results obtained with the combined global–regional wind forcing showed some consistency between scenarios. In general, it was shown that mean and extreme wave heights will increase in the future only in winter and only in the southwest of UK and west of France, north of about 44–45° N. Otherwise, wave heights are projected to decrease, especially in summer. Nevertheless, this decrease is dominated by local wind waves whilst swell is found to increase. Only in spring do both swell and local wind waves decrease in average height.  相似文献   

3.
A three-dimensional finite volume unstructured mesh model of the west coast of Britain, with high resolution in the coastal regions, is used to investigate the role of wind wave turbulence and wind and tide forced currents in producing maximum bed stress in the eastern Irish Sea. The spatial distribution of the maximum bed stress, which is important in sediment transport problems, is determined, together with how it is modified by the direction of wind forced currents, tide–surge interaction and a surface source of wind wave turbulence associated with wave breaking. Initial calculations show that to first order the distribution of maximum bed stress is determined by the tide. However, since maximum sediment transport occurs at times of episodic events, such as storm surges, their effects upon maximum bed stresses are examined for the case of strong northerly, southerly and westerly wind forcing. Calculations show that due to tide–surge interaction both the tidal distribution and the surge are modified by non-linear effects. Consequently, the magnitude and spatial distribution of maximum bed stress during major wind events depends upon wind direction. In addition calculations show that a surface source of turbulence due to wind wave breaking in shallow water can influence the maximum bed stress. In turn, this influences the wind forced flow and hence the movement of suspended sediment. Calculations of the spatial variability of maximum bed stress indicate the level of measurements required for model validation.  相似文献   

4.
An unstructured mesh model of the west coast of Britain, covering the same domain and using topography and open boundary forcing that are identical to a previous validated uniform grid finite difference model of the region, is used to compare the performance of a finite volume (FV) and a finite element (FE) model of the area in determining tide–surge interaction in the region. Initial calculations show that although qualitatively both models give comparable tidal solutions in the region, comparison with observations shows that the FV model tends to under-estimate tidal amplitudes and hence background tidal friction in the eastern Irish Sea. Storm surge elevations in the eastern Irish Sea due to westerly, northerly and southerly uniform wind stresses computed with the FV model tend to be slightly higher than those computed with the FE model, due to differences in background tidal friction. However, both models showed comparable non-linear tide–surge interaction effects for all wind directions, suggesting that they can reproduce the extensive tide–surge interaction processes that occur in the eastern Irish Sea. Following on from this model comparison study, the physical processes contributing to surge generation and tide–surge interaction in the region are examined. Calculations are performed with uniform wind stresses from a range of directions, and the balance of various terms in the hydrodynamic equations is examined. A detailed comparison of the spatial variability of time series of non-linear bottom friction and non-linear momentum advection terms at six adjacent nodes at two locations in water depths of 20 and 6 m showed some spatial variability from one node to another. This suggests that even in the near coastal region, where water depths are of the order of 6 m and the mesh is fine (of order 0.5 km), there is significant spatial variability in the non-linear terms. In addition, distributions of maximum bed stress due to tides and wind forcing in nearshore regions show appreciable spatial variability. This suggests that intensive measurement campaigns and very high-resolution mesh models are required to validate and reproduce the non-linear processes that occur in these regions and to predict extreme bed stresses that can give rise to sediment movement. High-resolution meshes will also be required in pollution transport problems.  相似文献   

5.
Global atmosphere-ocean general circulation models are the tool by which projections for climate changes due to radiative forcing scenarios have been produced. Further, regional atmospheric downscaling of the global models may be applied in order to evaluate the details in, e.g., temperature and precipitation patterns. Similarly, detailed regional information is needed in order to assess the implications of future climate change for the marine ecosystems. However, regional results for climate change in the ocean are sparse. We present the results for the circulation and hydrography of the Barents Sea from the ocean component of two global models and from a corresponding pair of regional model configurations. The global models used are the GISS AOM and the NCAR CCSM3. The ROMS ocean model is used for the regional downscaling of these results (ROMS-G and ROMS-N configurations, respectively). This investigation was undertaken in order to shed light on two questions that are essential in the context of regional ocean projections: (1) How should a regional model be set up in order to take advantage of the results from global projections; (2) What limits to quality in the results of regional models are imposed by the quality of global models? We approached the first question by initializing the ocean model in the control simulation by a realistic ocean analysis and specifying air-sea fluxes according to the results from the global models. For the projection simulation, the global models’ oceanic anomalies from their control simulation results were added upon initialization. Regarding the second question, the present set of simulations includes regional downscalings of the present-day climate as well as projected climate change. Thus, we study separately how downscaling changes the results in the control climate case, and how scenario results are changed. For the present-day climate, we find that downscaling reduces the differences in the Barents Sea between the original global models. Furthermore, the downscaled results are closer to observations. On the other hand, the downscaled results from the scenario simulations are significantly different: while the heat transport into the Barents Sea and the salinity distribution change modestly from control to scenario with ROMS-G, in ROMS-N the heat transport is much larger in the scenario simulation, and the water masses become much less saline. The lack of robustness in the results from the scenario simulations leads us to conclude that the results for the regional oceanic response to changes in the radiative forcing depend on the choice of AOGCM and is not settled. Consequently, the effect of climate change on the marine ecosystem of the Barents Sea is anything but certain.  相似文献   

6.
The storm surge period of 13–16 November 1977 when there was a major positive surge followed by a negative surge in the Irish Sea is investigated using a two-dimensional unstructured mesh model of the west coast of Britain. The model accounts for tidal and external surge forcing across its open boundaries which are situated in the Celtic Sea and off the west coast of Scotland. Although this period has been examined previously using a uniform finite-difference model, and a finite element model, neither of these could resolve the Mersey estuary which is the focus of the present study. By using a finite element model with very high mesh resolution within the Mersey, the spatial variability of surge elevations and currents within the Mersey to rapidly changing surge dynamics can be examined. The mesh in the model varies from about 7 km in deep water, to the order of 100 m in the Mersey, with the largest mesh length reaching 17 km in deep offshore regions, and smallest of order 26 m occurring in shallow coastal regions of the Mersey estuary. The model accounts for wetting/drying which occurs in shallow water coastal areas. Calculations showed that during the positive surge period, the amplitude and speed of propagation of the surge was largest in the deep water channels. This gave rise to significant spatial variability of surge elevations and currents within the estuary. As wind stresses decreased over the Irish Sea, a negative surge occurred over Liverpool Bay and at the entrance to the Mersey. However, within the Mersey there was a local positive surge which continued to propagate down the estuary. This clearly showed that although the large scale response of the Irish Sea to changing wind fields occurred rapidly, the response in the Mersey was much slower. These calculations with a west coast variable mesh model that included a high-resolution representation of the Mersey revealed for the first time how elevations and currents within the Mersey responded to Irish Sea surges that rapidly changed from positive to negative.  相似文献   

7.
The paper addresses the individual and collective contribution of different forcing factors (tides, wind waves, and sea-level rise) to the dynamics of sediment in coastal areas. The results are obtained from simulations with the General Estuarine Transport Model coupled with a sediment transport model. The wave-induced bed shear stress is formulated using a simple model based on the concept that the turbulent kinetic energy (TKE) associated with wind waves is a function of orbital velocity, the latter depending on the wave height and water depth. A theory is presented explaining the controls of sediment dynamics by the TKE produced by tides and wind waves. Several scenarios were developed aiming at revealing possible trends resulting from realistic (observed or expected) changes in sea level and wave magnitude. The simulations demonstrate that these changes not only influence the concentration of sediment, which is very sensitive to the magnitude of the external forcing, but also the temporal variability patterns. The joint effect of tides and wave-induced bed shear stress revealed by the comparison between theoretical results and simulations is well pronounced. The intercomparison between different scenarios demonstrates that the spatial patterns of erosion and deposition are very sensitive to the magnitude of wind waves and sea-level rise. Under a changing climate, forcing the horizontal distribution of sediments adjusts mainly through a change in the balance of export and import of sediment from the intertidal basins. The strongest signal associated with this adjustment is simulated North of the barrier islands where the evolution of sedimentation gives an integrated picture of the processes in tidal basins.  相似文献   

8.
The effect of wind waves on water level and currents during two storms in the North Sea is investigated using a high-resolution Nucleus for European Modelling of the Ocean (NEMO) model forced with fluxes and fields from a high-resolution wave model. The additional terms accounting for wave-current interaction that are considered in this study are the Stokes-Coriolis force, the sea-state-dependent energy and momentum fluxes. The individual and collective role of these processes is quantified and the results are compared with a control run without wave effects as well as against current and water-level measurements from coastal stations. We find a better agreement with observations when the circulation model is forced by sea-state-dependent fluxes, especially in extreme events. The two extreme events, the storm Christian (25–27 October 2013), and about a month later, the storm Xaver (5–7 December 2013), induce different wave and surge conditions over the North Sea. Including the wave effects in the circulation model for the storm Xaver raises the modelled surge by more than 40 cm compared with the control run in the German Bight area. For the storm Christian, a difference of 20–30 cm in the surge level between the wave-forced and the stand-alone ocean model is found over the whole southern part of the North Sea. Moreover, the modelled vertical velocity profile fits the observations very well when the wave forcing is accounted for. The contribution of wave-induced forcing has been quantified indicating that this represents an important mechanism for improving water-level and current predictions.  相似文献   

9.
Ocean Dynamics - The impacts of data assimilation, downscaling, and tidal forcing were investigated with focus on the representation of the Cape São Tomé Eddy (CSTE). Sea level anomaly...  相似文献   

10.
Globally coupled climate models are generally capable of reproducing the observed trends in the globally averaged atmospheric temperature. However, the global models do not perform as well on regional scales. Here, we present results from four 100-year, high-resolution ocean model experiments (resolution less than 1 km) for the western Baltic Sea. The forcing is taken from a regional atmospheric model and a regional ocean model, imbedded into two global greenhouse gas emission scenarios, A1B and B1, for the period of 2000 to 2100 with each two realisations. Two control runs from 1960 to 2000 are used for validation. For both scenarios, the results show a warming with an increase of 0.5–2.5 K at the sea surface and 0.7–2.8 K below 40 m. The simulations further indicate a decrease in salinity by 1.5–2 practical salinity units. The increase in water temperature leads to a prolongation of heat waves based on present-day thresholds. This amounts to a doubling or even tripling of the heat wave duration. The simulations show a decrease in inflow events (barotropic/baroclinic), which will affect the deepwater generation and ventilation of the central Baltic Sea. The high spatial resolution allows us to diagnose the inflow events and the mechanism that will cause future changes. The reduction in barotropic inflow events correlates well with the increase in westerly winds. The changes in the baroclinic inflows can be consistently explained by the reduction of calm wind periods and thus a weakening of the necessary stratification in the western Baltic Sea and the Danish Straits.  相似文献   

11.
Large-scale redistribution of sand by hydrodynamical processes in shelf seas is important for basin and coastal evolution on time scales of a thousand to tens of thousands of years. The influence of tides on the large-scale net sand-transport patterns in the North Sea has received much attention, but the influence of wind-driven flow and wind waves has hardly been investigated. Here, to establish the present-day situation and to develop a method that can also be used for palaeo-situations and forecasts for different sea levels, this influence is assessed for the present southern North Sea using a numerical flow model, a parametric wave model and a wave-averaged sand-transport formulation. Various forcing combinations are used to identify the dominant transport mechanisms: tides only, tides and wind, tides and waves, and combined tides, wind and waves. Wind forcing is applied in two ways to find an efficient, but still representative, method of incorporating this stochastic process: a statistical wind climatology and an observed time series. The results show that (i) the wind climatology yields a good approximation of the sand transport computed using the time series; (ii) wind-driven flow and waves only contribute significantly to the net sand transport by tides when acting together where tidal currents are small; and (iii) various combinations of forcings dominate the net sand transport in different regions of the southern North Sea: (a) tides dominate in the southern, middle and northwestern parts of the Southern Bight and in the region of The Wash; (b) tides, wind-driven flow and waves all are important in the northeastern part of the Southern Bight; and (c) wind-driven flow and waves dominate north of the Friesian Islands, in the German Bight and on the Dogger Bank. Qualitative comparison with observations shows good agreement.  相似文献   

12.
The Pearl River Estuary (PRE) in South China's Guangdong Province is a subtropical estuary with highly irregular topography and dynamically complicated circulations. A nested-grid coastal circulation modelling system is used in this study to examine dynamic responses of the PRE to tides, meteorological forcing and buoyancy forcing. The nested-grid modelling system is based on the Princeton Ocean Model and consists of three downscaling subcomponents: including an outer-most model with a coarse horizontal resolution of ~7 km for simulating tidally forced and wind-driven surface elevations and depth-mean currents over the China Seas from Bohai Sea to the northern South China Sea and an innermost model with a fine resolution of ~1.2 km for simulating the 3D coastal circulation and hydrography over the PRE and adjacent coastal waters. Model results during the winter northeast monsoon surge in January and super typhoon Koryn in June of 1993 are used to demonstrate that the 3D coastal circulation and hydrographic distributions in the PRE are affected by tides, winds and buoyancy forcing associated with river discharge from the Pearl River with significant seasonal and synoptic variabilities.  相似文献   

13.
The impact of sea level rise (SLR) on the future morphological development of the Wadden Sea (North Sea) is investigated by means of extensive process-resolving numerical simulations. A new sediment and morphodynamic module was implemented in the well-established 3D circulation model GETM. A number of different validations are presented, ranging from an idealized 1D channel over a semi-idealized 2D Wadden Sea basin to a fully coupled realistic 40-year hindcast without morphological amplification of the Sylt-Rømøbight, a semi-enclosed subsystem of the Wadden Sea. Based on the results of the hindcast, four distinct future scenarios covering the period 2010–2100 are simulated. While these scenarios differ in the strength of SLR and wind forcing, they also account for an expected increase of tidal range over the coming century. The results of the future projections indicate a transition from a tidal-flat-dominated system toward a lagoon-like system, in which large fractions of the Sylt-Rømøbight will remain permanently covered by water. This has potentially dramatic implications for the unique ecosystem of the Wadden Sea. Although the simulations also predict an increased accumulation of sediment in the back-barrier basin, this accumulation is far too weak to compensate for the rise in mean sea level.  相似文献   

14.
The spatial resolution of wind forcing fields is critical for modeling ocean surface waves. We analyze here the performance of the non-hydrostatic numerical weather prediction system WRF-ARW (Weather Research and Forecasting) run with a 14-km resolution for hindcasting wind waves in the North Atlantic. The regional atmospheric model was run in the domain from 20° N to 70° N in the North Atlantic and was forced with ERA-Interim reanalysis as initial and boundary conditions in a spectral nudging mode. Here, we present the analysis of the impact of spectral nudging formulation (cutoff wavelengths and depth through which full weighting from reanalysis data is applied) onto the performance of the modeled 10-m wind speed and wind wave fields for 1 year (2010). For modeling waves, we use the third-generation spectral wave model WAVEWATCH III. The sensitivity of the atmospheric and wave models to the spectral nudging formulation is investigated via the comparison with reanalysis and observational data. The results reveal strong and persistent agreement with reanalysis data during all seasons within the year with well-simulated annual cycle and regional patterns independently of the nudging parameters that were tested. Thus, the proposed formulation of the nudging provides a reliable framework for future long-term experiments aiming at hindcasting climate variability in the North Atlantic wave field. At the same time, dynamical downscaling allows for simulation of higher waves in coastal regions, specifically near the Greenland east coast likely due to a better representation of the mesoscale atmospheric dynamics in this area.  相似文献   

15.
The Marine and Atmospheric Research System (MARS) for the Caspian Sea meteorological characteristics is presented, which is implemented in Zubov State Oceanographic Institute. It includes computation of the atmospheric forcing with the Weather Research and Forecasting model, as well as computation of currents, sea level, temperature, salinity and sea ice with the Institute of Numerical Mathematics Ocean Model and the computation of wind wave parameters using the Russian wind-wave model. The results are presented on verification of the hydrometeocharacteristics simulated with the MARS for the Caspian Sea. As well, the retrospective simulation of the thermohydrodynamic characteristics in this basin is performed with MARS for the ice-free period 2003–2013. The important features of the Caspian Sea circulation are shown.  相似文献   

16.
The Northeast Atlantic possesses some of the highest wave energy levels in the world. The recent years have witnessed a renewed interest in harnessing this vast energy potential. Due to the complicated geomorphology of the Irish coast, there can be a significant variation in both the wave and wind climate. Long-term hindcasts with high spatial resolution, properly calibrated against available measurements, provide vital information for future deployments of ocean renewable energy installations. These can aid in the selection of adequate locations for potential deployment and for the planning and design of those marine operations. A 34-year (from 1979 to 2012), high-resolution wave hindcast was performed for Ireland including both the Atlantic and Irish Sea coasts, with a particular focus on the wave energy resource. The wave climate was estimated using the third-generation spectral wave model WAVEWATCH III®; version 4.11, the unstructured grid formulation. The wave model was forced with directional wave spectral data and 10-m winds from the European Centre for Medium Range Weather Forecasts (ECMWF) ERA-Interim reanalysis, which is available from 1979 to the present. The model was validated against available observed satellite altimeter and buoy data, particularly in the nearshore, and was found to be excellent. A strong spatial and seasonal variability was found for both significant wave heights, and the wave energy flux, particularly on the north and west coasts. A strong correlation between the North Atlantic Oscillation (NAO) teleconnection pattern and wave heights, wave periods, and peak direction in winter and also, to a lesser extent, in spring was identified.  相似文献   

17.

Excessive usage of fossil fuels and high emission of greenhouse gases have increased the earth’s temperature and consequently have led to changes in wind and wave regimes. The main effects of climate change on oceans are warming of the ocean water, melting of ice, acidification of ocean water, and change in the ocean currents. The main effects of climate change on coastal regions are change in the coast hydrodynamics, sea level rise, change in wave height, coastal erosion, coastal structure damage, food shortage, and storms. Due to the importance of waves in the coastal zone and its effect on erosion and sedimentation, it is necessary to study wave changes. In this study, the effect of climate change on wave specifications was evaluated in the southern coast of the Caspian Sea in Noshahr Port. To simulate wave parameters, the third generation spectral Simulating WAves Nearshore (SWAN) model was used. Wave modeling was carried out using the SWAN numerical model for two 30-yearly periods, including the control period (1984 to 2014) and the future period (2051 to 2080). For wave modeling in the control period, the European Center for Average Weather Forecast wind field was used, and for the future period, a downscaled wind field from Coordinated Regional Downscaling Experiment projection, which was sponsored by World Climate Research Programme, based on the most recent emission scenarios RCP2.6, RCP4.5, and RCP8.5, was used. The model results were calibrated and verified with buoy-recorded data. The effect of the climate change on the wave parameters was evaluated by studying the differences between the patterns in three scenarios and the control period. Results showed that the 30-year maximum significant wave height will increase because of climate change, and the wave direction will not change. In addition, the intensity of storms will increase in the future.

  相似文献   

18.
We present an idealized network model for storm surges in the Wadden Sea, specifically including a time-dependent wind forcing (wind speed and direction). This extends the classical work by H.A. Lorentz who only considered the equilibrium response to a steady wind forcing. The solutions obtained in the frequency domain for the linearized shallow-water equations in a channel are combined in an algebraic system for the network. The velocity scale that is used for the linearized friction coefficient is determined iteratively. The hindcast of the storm surge of 5 December 2013 produces credible time-varying results. The effects of storm and basin parameters on the peak surge elevation are the subject of a sensitivity analysis. The formulation in the frequency domain reveals which modes in the external forcing lead to the largest surge response at coastal stations. There appears to be a minimum storm duration, of about 3–4 h, that is required for a surge to attain its maximum elevation. The influence of the water levels at the North Sea inlets on the Wadden Sea surges decreases towards the shore. In contrast, the wind shearing generates its largest response near the shore, where the fetch length is at its maximum.  相似文献   

19.
Bo Yang  Jinyu Sheng 《Ocean Dynamics》2008,58(5-6):375-396
This study examines main physical processes affecting the three-dimensional (3D) circulation and hydrographic distributions over the inner Scotian Shelf (ISS) in June and July 2006 using a nested-grid coastal ocean circulation modeling system known as the NCOPS-LB. The nested-grid system has five relocatable downscaling submodels, with the outermost submodel of a coarse horizontal resolution of (1/12)° for simulating storm surges and barotropic shelf waves over the Eastern Canadian shelf and the innermost submodel of a fine resolution of ~180 m for simulating the 3D coastal circulation and hydrography over Lunenburg Bay of Nova Scotia in the default setup. The NCOPS-LB is driven by meteorological and astronomical forcing and used to study the storm-induced circulation over the ISS during tropical storm Alberto. Model results demonstrate that the coastal circulation and hydrographic distributions over the ISS are affected significantly by tides, local wind forcing, and remotely generated coastal waves during the study period.  相似文献   

20.
The Adriatic Sea general circulation model coupled to a third generation wave model SWAN and a sediment transport model was implemented in the Adriatic Sea to study the dynamics of the sediment transport and resuspension in the northern Adriatic Sea (NAS) during the Bora event in January 2001. The bottom boundary layer (BBL) was resolved by the coupled model with high vertical resolution, and the mechanism of the wave–current interaction in the BBL was also represented in the model. The study found that, during the Bora event of 13–17 January 2001, large waves with significant wave height 2 m and period of 5 s were generated by strong winds in the northwestern shelf of the Adriatic where the direction of wave propagation was orthogonal to the current. The combined motion of the wave and current in the BBL increased the bottom stress over the western Adriatic shelf, resulting in stronger sediment resuspension there. Combining stronger bottom resuspension and strong upward vertical flux of resuspended sediments due to turbulent mixing, the model predicted that sediment concentration near the Po River was much higher than that predicted by the model run without wave forcing. The study also shows that wave–current interaction in the BBL reduced the western Adriatic Coastal Currents (WACCs) in the shallower north. It is concluded that wave forcing significantly changed the sediment distributions and increased the total horizontal fluxes over the western shelf. These results signified wave effect on sediment flux and distribution in the NAS, and suggested that waves cannot be neglected in the study of dynamics of sediment transport and resuspension in the shallow coastal seas. By including the tidal forcing in the coupled model, we also examined the effect of tides on the sediment transport dynamics in the NAS.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号