共查询到20条相似文献，搜索用时 46 毫秒
1.
Deep slab subduction and dehydration and their geodynamic consequences: Evidence from seismology and mineral physics 总被引：14，自引：9，他引：5
We present new pieces of evidence from seismology and mineral physics for the existence of low-velocity zones in the deep part of the upper mantle wedge and the mantle transition zone that are caused by fluids from the deep subduction and deep dehydration of the Pacific and Philippine Sea slabs under western Pacific and East Asia. The Pacific slab is subducting beneath the Japan Islands and Japan Sea with intermediate-depth and deep earthquakes down to 600 km depth under the East Asia margin, and the slab becomes stagnant in the mantle transition zone under East China. The western edge of the stagnant Pacific slab is roughly coincident with the NE–SW Daxing'Anling-Taihangshan gravity lineament located west of Beijing, approximately 2000 km away from the Japan Trench. The upper mantle above the stagnant slab under East Asia forms a big mantle wedge (BMW). Corner flow in the BMW and deep slab dehydration may have caused asthenospheric upwelling, lithospheric thinning, continental rift systems, and intraplate volcanism in Northeast Asia. The Philippine Sea slab has subducted down to the mantle transition zone depth under Western Japan and Ryukyu back-arc, though the seismicity within the slab occurs only down to 200–300 km depths. Combining with the corner flow in the mantle wedge, deep dehydration of the subducting Pacific slab has affected the morphology of the subducting Philippine Sea slab and its seismicity under Southwest Japan. Slow anomalies are also found in the mantle under the subducting Pacific slab, which may represent small mantle plumes, or hot upwelling associated with the deep slab subduction. Slab dehydration may also take place after a continental plate subducts into the mantle. 相似文献
2.
《International Geology Review》2012,54(7):787-803
Slow–ultraslow spreading oceans are mostly floored by mantle peridotites and are typified by rifted continental margins, where subcontinental lithospheric mantle is preserved. Structural and petrologic investigations of the high-pressure (HP) Alpine Voltri Massif ophiolites, which were derived from the Late Jurassic Ligurian Tethys fossil slow–ultraslow spreading ocean, reveal the fate of the oceanic peridotites/serpentinites during subduction to depths involving eclogite-facies conditions, followed by exhumation. The Ligurian Tethys was formed by continental extension within the Europe–Adria lithosphere and consisted of sea-floor exposed mantle peridotites with an uppermost layer of oceanic serpentinites and of subcontinental lithospheric mantle at the rifted continental margins. Plate convergence caused eastward subduction of the oceanic lithosphere of the Europe plate and the uppermost serpentinite layer of the subducting slab formed an antigorite serpentinite-subduction channel. Sectors of the rather unaltered mantle lithosphere of the Adria extended margin underwent ablative subduction and were detached, embedded, and buried to eclogite-facies conditions within the serpentinite-subduction channel. At such P–T conditions, antigorite serpentinites from the oceanic slab underwent partial HP dehydration (antigorite dewatering and growth of new olivine). Water fluxing from partial dehydration of host serpentinites caused partial HP hydration (growth of Ti-clinohumite and antigorite) of the subducted Adria margin peridotites. The serpentinite-subduction channel (future Beigua serpentinites), acting as a low-viscosity carrier for high-density subducted rocks, allowed rapid exhumation of the almost unaltered Adria peridotites (future Erro–Tobbio peridotites) and their emplacement into the Voltri Massif orogenic edifice. Over in the past 35 years, this unique geologic architecture has allowed us to investigate the pristine structural and compositional mantle features of the subcontinental Erro–Tobbio peridotites and to clarify the main steps of the pre-oceanic extensional, tectonic–magmatic history of the Europe–Adria asthenosphere–lithosphere system, which led to the formation of the Ligurian Tethys. Our present knowledge of the Voltri Massif provides fundamental information for enhanced understanding, from a mantle perspective, of formation, subduction, and exhumation of oceanic and marginal lithosphere of slow–ultraslow spreading oceans. 相似文献
3.
Relationship between Mesozoic Magmatism and Subduction in the Da Hinggan-Yanshan Area 总被引：1，自引：0，他引：1
SHAO Ji''anPeking University Beijing LIU Futian CHEN Hui HAN QingjunInstitute of Geology Geophysics Chinese Academy of Sciences Beijing 《《地质学报》英文版》2001,75(1)
High-resolution tomographic images of the belt crossing the Japan Trench-Changbai Mountains-Dong Ujimqin Qi are represented in this paper, revealing the shape of a subducted slab in the western Pacific region and characteristics of the lithospheric structures under the Changbai Mountains and the Da Hinggan Mountains. Studies of the spatial distribution, subduction time and the time-lag between the subduction and magmatism, combined with petrology and isotope geochemistry of the Late Mesozoic volcano-plutonic rocks from the Da Hinggan Mountains-Yanshan Mountains have further proved the independence of magmatic activities from the subduction of the Pacific plate. The Mesozoic tectono-thermal evolutionary history and structural characteristics of the lithosphere in the Da Hinggan Mountains and North China suggest that the formation and evolution of magma have probably a close relationship with the delamination and thinning of the continental lithosphere and the underplating resulting from the consequent up 相似文献
4.
High‐resolution tomographic images of the belt crossing the Japan Trench‐Changbai Mountains‐Dong Ujimqin Qi are represented in this paper, revealing the shape of a subducted slab in the western Pacific region and characteristics of the lithospheric structures under the Changbai Mountains and the Da Hinggan Mountains. Studies of the spatial distribution, subduction time and the time‐lag between the subduction and magmatism, combined with petrology and isotope geochemistry of the Late Mesozoic volcano‐plutonic rocks from the Da Hinggan Mountains‐Yanshan Mountains have further proved the independence of magmatic activities from the subduction of the Pacific plate. The Mesozoic tectono‐thermal evolutionary history and structural characteristics of the lithosphere in the Da Hinggan Mountains and North China suggest that the formation and evolution of magma have probably a close relationship with the delamination and thinning of the continental lithosphere and the underplating resulting from the consequent upwelling of the asthenosphere. On the other hand, the large‐scale strike‐slip fault system, resulting from sinistral shearing of the Pacific plate relative to the Asian continent in the Mesozoic, is responsible for the formation and emplacement of magma on the continental margin. It was the intense crust‐mantle interaction, together with structural deformation at the shallower levels that led to the large tectono‐magmatic belt in the East Asian continental margin. 相似文献
5.
《Gondwana Research》2010,17(3-4):401-413
We present new pieces of evidence from seismology and mineral physics for the existence of low-velocity zones in the deep part of the upper mantle wedge and the mantle transition zone that are caused by fluids from the deep subduction and deep dehydration of the Pacific and Philippine Sea slabs under western Pacific and East Asia. The Pacific slab is subducting beneath the Japan Islands and Japan Sea with intermediate-depth and deep earthquakes down to 600 km depth under the East Asia margin, and the slab becomes stagnant in the mantle transition zone under East China. The western edge of the stagnant Pacific slab is roughly coincident with the NE–SW Daxing'Anling-Taihangshan gravity lineament located west of Beijing, approximately 2000 km away from the Japan Trench. The upper mantle above the stagnant slab under East Asia forms a big mantle wedge (BMW). Corner flow in the BMW and deep slab dehydration may have caused asthenospheric upwelling, lithospheric thinning, continental rift systems, and intraplate volcanism in Northeast Asia. The Philippine Sea slab has subducted down to the mantle transition zone depth under Western Japan and Ryukyu back-arc, though the seismicity within the slab occurs only down to 200–300 km depths. Combining with the corner flow in the mantle wedge, deep dehydration of the subducting Pacific slab has affected the morphology of the subducting Philippine Sea slab and its seismicity under Southwest Japan. Slow anomalies are also found in the mantle under the subducting Pacific slab, which may represent small mantle plumes, or hot upwelling associated with the deep slab subduction. Slab dehydration may also take place after a continental plate subducts into the mantle. 相似文献
6.
The lithospheric sinking along subduction zones is part of the mantle convection. Therefore, computing the volume of lithosphere recycled within the mantle by subducting slabs quantifies the equivalent amount of mantle that should be displaced, for the mass conservation criterion. The rate of subduction is constrained by the convergence rate between upper and lower plates and the motion of the subduction hinge H that may either converge or diverge relative to the upper plate. Here, starting from the analysis of the slab hinge kinematics, we evaluate the subduction rate at 31 subduction zones worldwide, useful to compute volumes of sinking lithosphere into the mantle. Our results show that ∼190 km3/yr and ∼88 km3/yr of lithospheric slabs are currently subducting below H-divergent and H-convergent subduction zones, respectively. We also propose supporting numerical models providing asymmetric volumes of the subducted lithosphere, using the subduction rate instead of plate convergence, as boundary condition. Furthermore, H-divergent subduction zones appear to be coincident with subductions having “westward”-directed slabs, whereas H-convergent subduction zones are mostly compatible with those that have “eastward-to-northeastward”-directed slabs. On the basis of this geographical polarity, our lithospheric volume estimation gives ∼214 km3/yr and ∼88 km3/yr of subducting lithosphere, respectively. This entails that W-directed subduction zones contribute more than twice in lithospheric sinking into the mantle with respect to E-to-NE-directed ones. In accordance with the conservation of mass principle, this volumetric asymmetry in the mantle suggests a displacement of ∼120 km3/yr of mantle material from west to east, providing a constraint for global asymmetric mantle convection. 相似文献
7.
At continental subduction initiation, the continental crust buoyancy may induce, first, a convergence slowdown, and second, a compressive stress increase that could lead to the forearc lithosphere rupture. Both processes could influence the slab surface P–T conditions, favoring on one side crust partial melting or on the opposite the formation of ultra-high pressure/low temperature (UHP-LT) mineral. We quantify these two effects by performing numerical simulations of subduction. Water transfers are computed as a function of slab dehydration/overlying mantle hydration reactions, and a strength decrease is imposed for hydrated mantle rocks. The model starts with an old oceanic plate ( 100 Ma) subducting for 145.5 Myr with a 5 cm/yr convergence rate. The arc lithosphere is thermally thinned between 100 km and 310 km away from the trench, due to small-scale convection occuring in the water-saturated mantle wedge. We test the influence of convergence slowdown by carrying on subduction with a decreased convergence rate (≤ 2 cm/yr). Surprisingly, the subduction slowdown yields not only a strong slab warming at great depth (> 80 km), but also a significant cooling of the forearc lithosphere at shallower depth. The convergence slowdown increases the subducted crust temperature at 90 km depth to 705 ± 62 °C, depending on the convergence rate reduction, and might thus favor the oceanic crust partial melting in presence of water. For subduction velocities ≤ 1 cm/yr, slab breakoff is triggered 20–32 Myr after slowdown onset, due to a drastic slab thermal weakening in the vicinity of the interplate plane base. At last, the rupture of the weakened forearc is simulated by imposing in the thinnest part of the overlying lithosphere a dipping weakness plane. For convergence with rates ≥ 1 cm/yr, the thinned forearc first shortens, then starts subducting along the slab surface. The forearc lithosphere subduction stops the slab surface warming by hot asthenosphere corner flow, and decreases in a first stage the slab surface temperature to 630 ± 20 °C at 80 km depth, in agreement with P–T range inferred from natural records of UHP-LT metamorphism. The subducted crust temperature is further reduced to 405 ± 10 °C for the crust directly buried below the subducting forearc. Such a cold thermal state at great depth has never been sampled in collision zones, suggesting that forearc subduction might not be always required to explain UHP-LT metamorphsim. 相似文献
8.
Yanghua Wang G.A. Houseman G. Lin F. Guo Y.-J. Wang W.-M. Fan X. Chang 《Tectonophysics》2005,405(1-4):47-63
Horizontal extension of a previously thickened crust could be the principal mechanism that caused the development of widespread extensional basins throughout the North China block (Hua-Bei region) during the Mesozoic. We develop here a regional tectonic model for the evolution of the lithosphere in the North China block, based on thin sheet models of lithospheric deformation, with numerical solutions obtained using the finite element method. The tectonic evolution of this region is defined conceptually by two stages in our simplified tectonic model: the first stage is dominated by N–S shortening, and the second by E–W extension. We associate the N–S shortening with the Triassic continental collision between the North and South China blocks, assuming that the Tan-Lu Fault system defines the eastern boundary of the North China block. The late Mesozoic E–W extension that created the Mesozoic basin systems requires a change in the regional stress state that could have been triggered by either or both of the following factors: First, gravitational instability of the lithosphere triggered by crustal convergence might have removed the lower layers of the thickened mantle lithosphere and thus caused a rapid increase in the local gravitational potential energy of the lithosphere. Secondly, a change to the constraining stress on the eastern boundary of the North China block, that might have been caused by roll-back of the subducting Pacific slab, could have reduced the E–W horizontal stress enough to activate extension. Our simulations show that widespread thickening of the North China block by as much as 50% can be explained by the collision with South China in the Triassic and Jurassic. If convergence then ceases, E–W extension can occur in the model if the eastern boundary of the region can move outwards. We find that such extension may occur, restoring crustal thickness of order 30 km within a period of 50 Myr or less, if the depth-averaged constitutive relation of the lithosphere is Newtonian, and if the Argand number (the ratio of buoyancy-derived stress to viscous stress) is greater than about 4. Widespread convective thinning of the lithosphere is not required in order to drive the extension with these parameters. If, however, the lithospheric viscosity is non-Newtonian (with strain-rate proportional to the third power of stress) the extensional phase would not occur in a geologically plausible time unless the Argand number were significantly increased by a lithospheric thinning event that was triggered by crustal thickening ratios as low as 1.5. 相似文献
9.
《Gondwana Research》2014,25(3-4):936-945
Body wave seismic tomography is a successful technique for mapping lithospheric material sinking into the mantle. Focusing on the India/Asia collision zone, we postulate the existence of several Asian continental slabs, based on seismic global tomography. We observe a lower mantle positive anomaly between 1100 and 900 km depths, that we interpret as the signature of a past subduction process of Asian lithosphere, based on the anomaly position relative to positive anomalies related to Indian continental slab. We propose that this anomaly provides evidence for south dipping subduction of North Tibet lithospheric mantle, occurring along 3000 km parallel to the Southern Asian margin, and beginning soon after the 45 Ma break-off that detached the Tethys oceanic slab from the Indian continent. We estimate the maximum length of the slab related to the anomaly to be 400 km. Adding 200 km of presently Asian subducting slab beneath Central Tibet, the amount of Asian lithospheric mantle absorbed by continental subduction during the collision is at most 600 km. Using global seismic tomography to resolve the geometry of Asian continent at the onset of collision, we estimate that the convergence absorbed by Asia during the indentation process is ~ 1300 km. We conclude that Asian continental subduction could accommodate at most 45% of the Asian convergence. The rest of the convergence could have been accommodated by a combination of extrusion and shallow subduction/underthrusting processes. Continental subduction is therefore a major lithospheric process involved in intraplate tectonics of a supercontinent like Eurasia. 相似文献
10.
Nishant Kumar Shamik Sarkar Nibir Mandal 《Journal of the Geological Society of India》2010,75(1):98-109
This paper presents results obtained from numerical model experiments to show different patterns of mantle flow produced by
lithospheric movement in subduction zones. Using finite element models, based on Maxwell rheology (relaxation time ∼ 1011S), we performed three types of experiments: Type 1, Type 2 and Type 3. In Type 1 experiments, the lithospheric slab subducts into the mantle by translational movement, maintaining a constant
subduction angle. The experimental results show that the flow perturbations occur in the form of vortices in the mantle wedge,
irrespective of subduction rate and angle. The mantle wedge vortex is coupled with another vortex below the subducting plate,
which tends to be more conspicuous with decreasing subduction rate. Type 2 experiments take into account a flexural deformation
of the plate, and reveal its effect on the flow patterns. The flexural motion induces a flow in the form of spiral pattern
at the slab edge. Density-controlled lithospheric flexural motion produces a secondary flow convergence zone beneath the overriding
plate. In many convergent zones the subducting lithospheric plate undergoes detachment, and moves down into the mantle freely.
Type 3 experiments demonstrate flow perturbations resulting from such slab detachments. Using three-dimensional models we
analyze lithospheric stresses in convergent zone, and map the belts of horizontal compression and tension as a function of
subduction angle. 相似文献
11.
Subduction is a fundamental mechanism of material exchange between the planetary interior and the surface. Despite its significance, our current understanding of fluctuating subducting plate area and slab volume flux has been limited to a range of proxy estimates. Here we present a new detailed quantification of subduction zone parameters from the Late Triassic to present day (230–0 Ma). We use a community plate motion model with evolving plate topologies to extract trench-normal convergence rates through time to compute subducting plate areas, and we use seafloor paleo-age grids to estimate the thickness of subducting lithosphere to derive the slab flux through time. Our results imply that slab flux doubled to values greater than 500 km3/yr from 180 Ma in the Jurassic to 130 Ma in the mid-Cretaceous, subsequently halving again towards the Cretaceous-Paleogene boundary, largely driven by subduction zones rimming the Pacific ocean basin. The 130 Ma spike can be attributed to a two-fold increase in mid-ocean ridge lengths following the break-up of Pangea, and a coincident increase in convergence rates, with average speeds exceeding 10 cm/yr. With one third of the total 230 - 0 Ma subducted volume entering the mantle during this short ∼50 Myr period, we suggest this slab superflux drove a surge in slab penetration into the lower mantle and an associated increase in the vigour of mantle return flow. This mid-Cretaceous event may have triggered, or at least contributed to, the formation of the Darwin Rise mantle superswell, dynamic uplift of the South African Plateau and the plume pulse that produced the Ontong-Java-Hikurangi-Manihiki and Kerguelen plateaus, among others.The models presented here contribute to an improved understanding of the time-evolving flux of material consumed by subduction, and suggest that slab superflux may be a general feature of continental dispersal following supercontinent breakup. These insights may be useful for better understanding how supercontinent cycles are related to transient episodes of Large Igneous Province and superswell formation, and the associated deep cycling of minerals and volatiles, as well as leading to a better understanding of tectonic drivers of long-term climate and icehouse-to-greenhouse transitions. 相似文献
12.
Free conductive flows in the asthenosphere, layer C, and subduction zone are considered on the basis of experimental and theoretical simulation. The main forces acting on the oceanic lithospheric plate in the subduction zone are described. The horizontally directed forces arising due to free convection in the asthenosphere and transferring the oceanic lithospheric plate toward subduction zone have been estimated. These are friction force Fa and force of gravitational sliding F rd. Thermogravitational force F tg, which is created because the subducting lithospheric plate has a lower average temperature than the ambient mantle, is estimated. The force created owing to phase transitions in the subducted plate has been estimated as well. The tangential stress at the contact of the subducting plate with the continental lithosphere and underlying upper mantle has been determined. The horizontal force arising due to different lateral temperature gradients in the upper mantle on the left and on the right of the subducting plate has been estimated. The results of experimental modeling of the effect exerted upon subduction by counter free convective flows developing in the asthenosphere are considered. The experiments show that the position of the descending free convective flow and thus of the subduction zone depends on the ratio of the thermal power of astehnospheric countercurrents. The pressure arising near the 670 km boundary gives rise to spreading of the subducting plate over this boundary. 相似文献
13.
《地学前缘(英文版)》2020,11(4):1219-1229
We investigate the effect of the westerly rotation of the lithosphere on the active margins that surround the Americas and find good correlations between the inferred easterly-directed mantle counterflow and the main structural grain and kinematics of the Andes and Sandwich arc slabs.In the Andes,the subduction zone is shallow and with low dip,because the mantle flow sustains the slab;the subduction hinge converges relative to the upper plate and generates an uplifting doubly verging orogen.The Sandwich Arc is generated by a westerly-directed SAM(South American) plate subduction where the eastward mantle flow is steepening and retreating the subduction zone.In this context,the slab hinge is retreating relative to the upper plate,generating the backarc basin and a low bathymetry single-verging accretionary prism.In Central America,the Caribbean plate presents a more complex scenario:(a) To the East,the Antilles Arc is generated by westerly directed subduction of the SAM plate,where the eastward mantle flow is steepening and retreating the subduction zone.(b) To the West,the Middle America Trench and Arc are generated by the easterly-directed subduction of the Cocos plate,where the shallow subduction caused by eastward mantle flow in its northern segment gradually steepens to the southern segment as it is infered by the preexisting westerly-directed subduction of the Caribbean Plateau.In the frame of the westerly lithospheric flow,the subduction of a divergent active ridge plays the role of introducing a change in the oceanic/continental plate's convergence angle,such as in NAM(North American)plate with the collision with the Pacific/Farallon active ridge in the Neogene(Cordilleran orogenic type scenario).The easterly mantle drift sustains strong plate coupling along NAM,showing at Juan de Fuca easterly subducting microplate that the subduction hinge advances relative to the upper plate.This lower/upper plate convergence coupling also applies along strike to the neighbor continental strike slip fault systems where subduction was terminated(San Andreas and Queen Charlotte).The lower/upper plate convergence coupling enables the capture of the continental plate ribbons of Baja California and Yakutat terrane by the Pacific oceanic plate,transporting them along the strike slip fault systems as para-autochthonous terranes.This Cordilleran orogenic type scenario,is also recorded in SAM following the collision with the Aluk/Farallon active ridge in the Paleogene,segmenting SAM margin into the eastwardly subducting Tupac Amaru microplate intercalated between the proto-LiquineOfqui and Atacama strike slip fault systems,where subduction was terminated and para-autochthonous terranes transported.In the Neogene,the convergence of Nazca plate with respect to SAM reinstalls subduction and the present Andean orogenic type scenario. 相似文献
14.
How was Taiwan created? 总被引：4，自引：0，他引：4
Since the beginning of formation of proto-Taiwan during late Miocene (9 Ma), the subducting Philippine (PH) Sea plate moved continuously through time in the N307° direction at a 5.6 cm/year velocity with respect to Eurasia (EU), tearing the Eurasian plate. Strain states within the EU crust are different on each side of the western PH Sea plate boundary (extensional in the Okinawa Trough and northeastern Taiwan versus contractional for the rest of Taiwan Island). The B feature corresponds to the boundary between the continental and oceanic parts of the subducting Eurasian plate and lies in the prolongation of the ocean–continent boundary of the northern South China Sea. Strain rates in the Philippines to northern Taiwan accretionary prism are similar on each side of B (contractional), though with different strain directions, perhaps in relation with the change of nature of the EU slab across B. Consequently, in the process of Taiwan mountain building, the deformation style was probably not changing continuously from the Manila to the Ryukyu subduction zones. The Luzon intra-oceanic arc only formed south of B, above the subducting Eurasian oceanic lithosphere. North of B, the Luzon arc collided with EU simultaneously with the eastward subduction of a portion of EU continental lithosphere beneath the Luzon arc. In its northern portion, the lower part of the Luzon arc was subducting beneath Eurasia while the upper part accreted against the Ryukyu forearc. Among the consequences of such a simple geodynamic model: (i) The notion of continuum from subduction to collision might be questioned. (ii) Traces of the Miocene volcanic arc were never found in the southwestern Ryukyu arc. We suggest that the portion of EU continental lithosphere, which has subducted beneath the Coastal Range, might include the Miocene Ryukyu arc volcanoes formed west of 126°E longitude and which are missing today. (iii) The 150-km-wide oceanic domain located south of B between the Luzon arc and the Manila trench, above the subducting oceanic EU plate (South China Sea) was progressively incorporated into the EU plate north of B. 相似文献
15.
On the role of subducting oceanic plateaus in the development of shallow flat subduction 总被引：2，自引：0，他引：2
Oceanic plateaus, aseismic ridges or seamount chains all have a thickened crust and their subduction has been proposed as a possible mechanism to explain the occurrence of flat subduction and related absence of arc magmatism below Peru, Central Chile and at the Nankai Trough (Japan). Their extra compositional buoyancy could prohibit the slab from sinking into the mantle. With a numerical thermochemical convection model, we simulated the subduction of an oceanic lithosphere that contains an oceanic crustal plateau of 18-km thickness. With a systematic variation, we examined the required physical parameters to obtain shallow flat subduction. Metastability of the basaltic crust in the eclogite stability field is of crucial importance for the slab to remain buoyant throughout the subduction process. In a 44-Ma-old subducting plate, basalt must be able to survive a temperature of 600–700 °C to keep the plate buoyant sufficiently long to cause a flat-slab segment. We found that the maximum yield stress in the slab must be limited to about 600 MPa to allow for the necessary bending to the horizontal. Young slabs show flat subduction for larger parameter ranges than old slabs, since they are less gravitationally unstable and show less resistance against bending. Hydrous weakening of the mantle wedge area and lowermost continent are required to allow for the necessary deformation of a change in subduction style from steep to flat. The maximum flat slab extent is about 300 km, which is sufficient to explain the observed shallow flat subduction near the Nankai Trough (Japan). However, additional mechanisms, such as active overthrusting by an overriding continental plate, need to be invoked to explain the flat-slab segments up to 500 km long below Peru and Central Chile. 相似文献
16.
17.
大洋俯冲和大陆碰撞沿走向的转换动力学及流体-熔体活动的作用 总被引：2，自引：1，他引：1
为了深入探讨大洋俯冲和大陆碰撞沿走向的转换及其动力学特征,同时更好的理解俯冲-碰撞带的流体-熔体活动及其效应,我们建立了一系列三维空间的大尺度、高分辨率的动力学数值模型。模拟结果显示,在板块会聚过程中,流体-熔体活动可以降低周围岩石的流变强度及两个板块之间的耦合作用,并能够促进大陆碰撞带俯冲板块的断离。同时,俯冲-碰撞带的空间转换模型揭示其深部结构存在巨大的沿走向的差异性,大陆碰撞带发生俯冲板块断离,而大洋俯冲板块持续下插。并且上覆板块的地壳物质发生从陆-陆碰撞带向洋-陆俯冲带的侧向逃逸。这种三维空间中沿走向的差异性俯冲-碰撞模式与中-东特提斯构造带相吻合,并揭示其动力学机制。 相似文献
18.
Evolution of the European Cenozoic Rift System: interaction of the Alpine and Pyrenean orogens with their foreland lithosphere 总被引：1，自引：0，他引：1
The evolution of the European Cenozoic Rift System (ECRIS) and the Alpine orogen is discussed on the base of a set of palaeotectonic maps and two retro-deformed lithospheric transects which extend across the Western and Central Alps and the Massif Central and the Rhenish Massif, respectively.During the Paleocene, compressional stresses exerted on continental Europe by the evolving Alps and Pyrenees caused lithospheric buckling and basin inversion up to 1700 km to the north of the Alpine and Pyrenean deformation fronts. This deformation was accompanied by the injection of melilite dykes, reflecting a plume-related increase in the temperature of the asthenosphere beneath the European foreland. At the Paleocene–Eocene transition, compressional stresses relaxed in the Alpine foreland, whereas collisional interaction of the Pyrenees with their foreland persisted. In the Alps, major Eocene north-directed lithospheric shortening was followed by mid-Eocene slab- and thrust-loaded subsidence of the Dauphinois and Helvetic shelves. During the late Eocene, north-directed compressional intraplate stresses originating in the Alpine and Pyrenean collision zones built up and activated ECRIS.At the Eocene–Oligocene transition, the subducted Central Alpine slab was detached, whereas the West-Alpine slab remained attached to the lithosphere. Subsequently, the Alpine orogenic wedge converged northwestward with its foreland. The Oligocene main rifting phase of ECRIS was controlled by north-directed compressional stresses originating in the Pyrenean and Alpine collision zones.Following early Miocene termination of crustal shortening in the Pyrenees and opening of the oceanic Provençal Basin, the evolution of ECRIS was exclusively controlled by west- and northwest-directed compressional stresses emanating from the Alps during imbrication of their external massifs. Whereas the grabens of the Massif Central and the Rhône Valley became inactive during the early Miocene, the Rhine Rift System remained active until the present. Lithospheric folding controlled mid-Miocene and Pliocene uplift of the Vosges-Black Forest Arch. Progressive uplift of the Rhenish Massif and Massif Central is mainly attributed to plume-related thermal thinning of the mantle-lithosphere.ECRIS evolved by passive rifting in response to the build-up of Pyrenean and Alpine collision-related compressional intraplate stresses. Mantle-plume-type upwelling of the asthenosphere caused thermal weakening of the foreland lithosphere, rendering it prone to deformation. 相似文献
19.
利用地球动力学数值模拟方法探讨了洋-陆汇聚时,大洋岩石圈的绝对俯冲速率和上覆大陆岩石圈的向洋绝对逆冲速率对俯冲模式的影响,尤其是上覆大陆的向洋绝对逆冲速率与平板俯冲之间的关系。模型结果显示,对于年龄为40 Ma的含正常洋壳厚度的大洋岩石圈,在初始俯冲角度为现今洋–陆俯冲平均倾角的极小值(19°)条件下,低速大洋俯冲(绝对俯冲速率≤3 cm/a)且上覆大陆岩石圈向洋绝对逆冲速率≥1 cm/a时,具备形成平板俯冲的条件。当中–高速大洋俯冲(绝对俯冲速度3 cm/a)时,在上覆大陆的绝对逆冲速率不小于俯冲速率时可以形成平板俯冲。当增加初始俯冲角度到平均倾角的极大值(36°)时,仅在低速大洋俯冲(绝对俯冲速率≤3 cm/a)且绝对逆冲速率达到10 cm/a时(自然界中基本不存在),才有可能出现平板俯冲,其他情况均表现为陡俯冲。我们的模拟结果表明:(1)较高的大洋岩石圈绝对俯冲速率更容易克服板间耦合作用力而有利于陡俯冲形成;(2)较高的上覆大陆绝对逆冲速率更有利于俯冲板片弯曲而趋向于平板俯冲形成;(3)上覆大陆朝向海沟的逆冲速率会在俯冲板片下方产生水平向陆的地幔流,绝对逆冲速率越大该地幔流越强烈,导致作用于板片下表面的水平剪切分量越大而有利于板片弯折和平板俯冲发生;(4)初始俯冲角度的增加对平板俯冲的形成起到强烈抑制作用。这些能被现今平板俯冲,如具相似洋–陆汇聚速率条件的南美洲西海岸平板俯冲实例所验证。 相似文献
20.
The presented scenario of free convection flows in a subduction zone is based on experimental and theoretical simulation. The experimental simulation of free convection flows is carried out under various conditions of heat transfer that occurs between the oceanic and continental limbs of the subduction zone. The experiments show that to provide insights into subduction zones, it is necessary to estimate the horizontal forces acting on the left and right sides of the plunging plate, as well as the resulting horizontal force and its direction. The vector sum of horizontal and gravity forces of the subducting plate determines the slope angle of this plate at different depths. Heat transfer in the subducting plate has been considered. The y min coordinate of the temperature minimum in a plate and the value of minimum temperature have been estimated. The forces that arise due to phase transition and owing to the horizontal temperature gradient along the thickness of the descending lithosphere in the transitional mantle layer C are estimated as well. These forces are directed in opposite direction from the y min coordinate and induce spreading of the subducting lithosphere along the boundary between the upper and lower mantle. Theoretical simulation of the hydrodynamics and heat transfer in combination with experimental simulation of convection flows in a subduction zone indicates that a significant part of the upper mantle material of the plunging plate circulates in the oceanic limb of the subduction zone owing to spreading from the region of minimum temperature along a 670 km boundary. 相似文献