首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
Slug tests performed using mini‐piezometers with internal diameters as small as 0.43 cm can provide a cost effective tool for hydraulic characterization. We evaluated the hydraulic properties of the apparatus in a laboratory environment and compared those results with field tests of mini‐piezometers installed into locations with varying hydraulic properties. Based on our evaluation, slug tests conducted in mini‐piezometers using the fabrication and installation approach described here are effective within formations where the hydraulic conductivity is less than 1 × 10?3 cm/s. While these constraints limit the potential application of this method, the benefits to this approach are that the installation, measurement, and analysis is cost effective, and the installation can be completed in areas where other (larger diameter) methods might not be possible. Additionally, this methodology could be applied to existing mini‐piezometers previously installed for other purposes. Such analysis of existing installations could be beneficial in interpreting previously collected data (e.g., water‐quality data or hydraulic head data).  相似文献   

2.
The spatial and temporal variability of groundwater–surface‐water (GW–SW) interactions was investigated in an intensively utilized salmon spawning riffle. Hydrochemical tracers, were used along with high‐resolution hydraulic head and temperature data to assess hyporheic dynamics. Surface and subsurface hydrochemistry were monitored at three locations where salmon spawning had been observed in previous years. Temperature and hydraulic head were monitored in three nests of three piezometers located to characterize the head, the run and the tail‐out of the riffle feature. Hydrochemical gradients between surface and subsurface water indicated increasing GW influence with depth into the hyporheic zone. Surface water was characterized by high dissolved oxygen (DO) concentrations, low alkalinity and conductivity. Hyporheic water was generally characterized by high levels of alkalinity and conductivity indicative of longer residence times, and low DO, indicative of reducing conditions. Hydrochemical and temperature gradients varied spatially over the riffle in response to changes in local GW–SW interactions at the depths investigated. Groundwater inputs dominated the head and tail of the riffle. The influence of SW increased in the area of accelerating flow and decreasing water depth through the run of the riffle. Temporal GW–SW interactions also varied in response to changing hydrological conditions. Gross changes in hyporheic hydrochemistry were observed at the weekly scale in response to changing flow conditions and surface water inputs to the hyporheic zone. During low flows, caused by freezing or dry weather, hyporheic hydrochemistry was dominated by GW inputs. During higher flows hyporheic hydrochemistry indicated that SW contributions increased. In addition, high‐resolution hydraulic head data indicated that rapid changes in GW–SW interactions occurred during hydrological events. The spatial, and possibly the temporal, variability of GW–SW interactions had a marked effect on the survival of salmon ova. It is concluded that hyporheic dynamics and their effect on stream ecology should be given increased consideration by fisheries and water resource managers. Copyright © 2004 John Wiley & Sons, Ltd.  相似文献   

3.
Data from a large-scale canal-drawdown test were used to estimate the specific yield (sy) of the Biscayne Aquifer, an unconfined limestone aquifer in southeast Florida. The drawdown test involved dropping the water level in a canal by about 30 cm and monitoring the response of hydraulic head in the surrounding aquifer. Specific yield was determined by analyzing data from the unsteady portion of the drawdown test using an analytical stream-aquifer interaction model (Zlotnik and Huang 1999). Specific yield values computed from drawdown at individual piezometers ranged from 0.050 to 0.57, most likely indicating heterogeneity of specific yield within the aquifer (small-scale variation in hydraulic conductivity may also have contributed to the differences in sy among piezometers). A value of 0.15 (our best estimate) was computed based on all drawdown data from all piezometers. We incorporated our best estimate of specific yield into a large-scale two-dimensional numerical MODFLOW-based ground water flow model and made predictions of head during a 183-day period at four wells located 337 to 2546 m from the canal. We found good agreement between observed and predicted heads, indicating our estimate of specific yield is representative of the large portion of the Biscayne Aquifer studied here. This work represents a practical and novel approach to the determination of a key hydrogeological parameter (the storage parameter needed for simulation and calculation of transient unconfined ground water flow), at a large spatial scale (a common scale for water resource modeling), for a highly transmissive limestone aquifer (in which execution of a traditional pump test would be impractical and would likely yield ambiguous results). Accurate estimates of specific yield and other hydrogeological parameters are critical for management of water supply, Everglades environmental restoration, flood control, and other issues related to the ground water hydrology of the Biscayne Aquifer.  相似文献   

4.
A harmonic analysis method was used to determine vertical hydraulic conductivities (Kv) in geologic media between vertically separated piezometers using water level measurements. In this method, each water level time series was filtered and then decomposed using harmonic analysis into a sum of trigonometric components. The phase and amplitude of each harmonic function were calculated. These data were used to estimate Kv values between vertically separated data sets assuming one-dimensional transient flow. The method was applied to water level data collected from nested piezometers at two thick clay-rich till aquitards in Saskatchewan, Canada. At one site, routine water levels were measured in 12 piezometers (installed between 1 and 29 m below ground surface) since installation (1995). At the other site, water levels were measured in seven piezometers (installed between 4 and 53 m below ground surface) since installation (1998-1999). The Kv calculated using harmonic analysis decreased with depth below the water table at both sites, approaching matrix estimates of hydraulic conductivity between 10 and 11 m and between 21 and 43 m below ground surface. These depths reflected the depth of extensive vertical fracturing at the sites and showed that the depth of fracturing may be site specific.  相似文献   

5.
Identifying connections in a fractured rock aquifer using ADFTs   总被引：1，自引：0，他引：1  
Halihan T  Love A  Sharp JM 《Ground water》2005,43(3):327-335
Fractured rock aquifers are difficult to characterize because of their extremely heterogeneous nature. Developing an understanding of fracture network hydraulic properties in these aquifers is difficult and time consuming, and field testing techniques for determining the location and connectivity of fractures in these aquifers are limited. In the Clare Valley, South Australia, well interference is an important issue for a major viticultural area that uses a fractured aquifer. Five fracture sets exist in the aquifer, all dipping > 25 degrees . In this setting, we evaluate the ability of steady-state asymmetric dipole-flow tests (ADFTs) to determine the connections between a test well and a set of piezometers. The procedure involves dividing a test well into two chambers using a single packer and pumping fluid from the upper chamber to the lower chamber. By conducting a series of tests at different packer elevations, an "input" signal is generated in fracture zones connected to the test well. By monitoring the "output" response of the hydraulic dipole field at piezometers, the connectivity of the fractures between the test well and piezometers can be determined. Results indicate the test well used in this study is connected in a complex three-dimensional geometry, with drawdown occurring above and below areas of potentiometric buildup. The ADFT method demonstrates that the aquifer evaluated in this study cannot be modeled effectively on the well scale using continuum flow models.  相似文献   

6.
Determination of hydraulic head, H, as a function of spatial coordinates and time, in ground water flow is the basis for aquifer management and for prediction of contaminant transport. Several computer codes are available for this purpose. Spatial distribution of the transmissivity, T(x,y), is a required input to these codes. In most aquifers, T varies in an erratic manner, and it can be characterized statistically in terms of a few moments: the expected value, the variance, and the variogram. Knowledge of these moments, combined with a few measurements, permits one to estimate T at any point using geostatistical methods. In a review of transmissivity data from 19 unconsolidated aquifers, Hoeksema and Kitanidis (1985) identified two types of the logtransmissivity Y= ln(T) variations: correlated variations with variance sigma2Yc and correlation scale, I(Y), on the order of kilometers, and uncorrelated variations with variance sigma2Yn. Direct identification of the logtransmissivity variogram, Gamma(Y), from measurements is difficult because T data are generally scarce. However, many head measurements are commonly available. The aim of the paper is to introduce a methodology to identify the transmissivity variogram parameters (sigma2Yc, I(Y), and sigma2Yn) using head data in formations characterized by large logtransmissivity variance. The identification methodology uses a combination of precise numerical simulations (carried out using analytic element method) and a theoretical model. The main objective is to demonstrate the application of the methodology to a regional ground water flow in Eagle Valley basin in west-central Nevada for which abundant transmissivity and head measurements are available.  相似文献   

7.
AN EXERCISE IN GROUND-WATER MODEL CALIBRATION AND PREDICTION   总被引：1，自引：0，他引：1  
Abstract. For a classroom exercise, nine groups of graduate students calibrated a numerical ground-water flow model to a set of perfectly observed hydraulic head data for a hypothetical phreatic aquifer. All groups used exactly the same numerical model and identical sets of observed data. After calibration, the students predicted the hydraulic head distribution in the aquifer resulting from a modification in one boundary condition. A quantitative analysis of the results of this calibration-prediction exercise vividly demonstrates some of the difficulties in parameter identification for ground-water flow models. Group predictions differed significantly. Successful prediction was strongly correlated with successful estimation of conductivity values, and was essentially unrelated to successful estimation of aquifer bottom elevations or with the number of trial-and-error simulations required for calibration. Most importantly, success in prediction was unrelated to success in matching observed heads under premodification conditions. In this sense, good calibration did not lead to good prediction.  相似文献   

8.
Important observations and parameters for a salt water intrusion model   总被引：1，自引：0，他引：1  
Shoemaker WB 《Ground water》2004,42(6-7):829-840
Sensitivity analysis with a density-dependent ground water flow simulator can provide insight and understanding of salt water intrusion calibration problems far beyond what is possible through intuitive analysis alone. Five simple experimental simulations presented here demonstrate this point. Results show that dispersivity is a very important parameter for reproducing a steady-state distribution of hydraulic head, salinity, and flow in the transition zone between fresh water and salt water in a coastal aquifer system. When estimating dispersivity, the following conclusions can be drawn about the data types and locations considered. (1) The "toe" of the transition zone is the most effective location for hydraulic head and salinity observations. (2) Areas near the coastline where submarine ground water discharge occurs are the most effective locations for flow observations. (3) Salinity observations are more effective than hydraulic head observations. (4) The importance of flow observations aligned perpendicular to the shoreline varies dramatically depending on distance seaward from the shoreline. Extreme parameter correlation can prohibit unique estimation of permeability parameters such as hydraulic conductivity and flow parameters such as recharge in a density-dependent ground water flow model when using hydraulic head and salinity observations. Adding flow observations perpendicular to the shoreline in areas where ground water is exchanged with the ocean body can reduce the correlation, potentially resulting in unique estimates of these parameter values. Results are expected to be directly applicable to many complex situations, and have implications for model development whether or not formal optimization methods are used in model calibration.  相似文献   

9.
In areas where peatlands are abundant, they are likely to play a significant role in the hydrological and hydrogeological dynamics of a watershed. Although individual case studies are reported in the literature, there is a large range of aquifer–peatland interactions and there is a need to understand the controls of these interactions. The objectives of this study were (1) to better understand aquifer–peatland connections and how these may be predicted by geology and geomorphic location and (2) to provide a variety of reference sites for glacial geological settings. Slope and depression peatlands were studied in the Abitibi‐Témiscamingue region and in the St. Lawrence Lowlands, two contrasting regions of southern Quebec. A total of 12 transects that span a shallow aquifer–peatland interface were instrumented with piezometers. Field investigations included peatland characterization, monthly water level monitoring, and continuous hydraulic head measurements with pressure transducers. The results indicate that 7 of the 12 transects receive groundwater from the surrounding shallow aquifer. At the peatland margin, four lateral flow patterns were identified and associated with slope peatlands (parallel inflow and divergent flow) and with depression peatlands (convergent flow and parallel outflow). Vertical hydraulic gradients suggest that water flows mainly downwards, i.e. from the peatland to the underlying mineral deposits. Vertical connectivity appears to decrease as the distance from the peatland margin increases. All of these exchanges are important components in the sustainability of peatland hydrogeological functions. The regional comparison of aquifer–peatland flow dynamics performed in this study provides a new set of referenced data for the assessment of aquifer–peatland connectivity. Copyright © 2014 John Wiley & Sons, Ltd.  相似文献   

10.
This paper presents a vertically averaged model for studying water and solute exchanges between a large river and its adjacent alluvial aquifer. The hydraulic model couples horizontal 2D Saint Venant equations for river flow and a 2D Dupuit equation for aquifer flow. The dynamic coupling between river and aquifer is provided by continuity of fluxes and water level elevation between the two domains. Equations are solved simultaneously by linking the two hydrological system matrices in a single global matrix in order to ensure the continuity conditions between river and aquifer and to accurately model two‐way coupling between these two domains. The model is applied to a large reach (about 36 km2) of the Garonne River (south‐western France) and its floodplain, including an instrumented site in a meander. Simulated hydraulic heads are compared with experimental measurements on the Garonne River and aquifer in the floodplain. Model verification includes comparisons for one point sampling date (27 piezometers, 30 March 2000) and for hydraulic heads variations measured continuously over 5 months (5 piezometers, 1 January to 1 June 2000). The model accurately reproduces the strong hydraulic connections between the Garonne River and its aquifer, which are confirmed by the simultaneous variation of the water level in the river and in piezometers located near the river bank. The simulations also confirmed that the model is able to reproduce groundwater flow dynamics during flood events. Given these results, the hydraulic model was coupled with a solute‐transport component, based on advection‐dispersion equations, to investigate the theoretical dynamics of a conservative tracer over 5 years throughout the 36 km2 reach studied. Meanders were shown to favour exchanges between river and aquifer, and although the tracer was diluted in the river, the contamination moved downstream from the injection plots and affected both river banks. Copyright © 2008 John Wiley & Sons, Ltd.  相似文献   

11.
The pore water pressure head that builds in the soil during storms is a critical factor for the prediction of potential slope instability. We report findings from a 3‐year study of pressure head in 83 piezometers distributed within a 13‐ha forested catchment on the northern coast of California. The study's primary objective was to observe the seasonal and storm‐based dynamics of pressure head at a catchment scale in relation to observed rainfall characteristics and in situ topography to better understand landscape patterns of pressure head. An additional goal was to determine the influence of the interaction between rainfall and forest canopy in altering delivery of water and pressure head during the large storms necessary to induce landsliding. We found that pressure head was highly variable in space and time at the catchment scale. Pore pressures peaked close to maximum rainfall intensity during the largest storms measured. The difference between rainfall and throughfall delivered through the canopy was negligible during the critical landslide‐producing peak rainfall periods. Pore pressure was spatially variable within the catchment and did not strongly correlate with surficial topographic features. Only 23% of the piezometers located in a variety of slope positions were found to be highly responsive to rainfall. Topographic index statistically explained peak pressure head at responsive locations during common storms, but not during the larger storms with potential to produce landslides. Drainage efficiency throughout the catchment increased significantly in storms exceeding 2 to 7 months peak pressure head return period indicated by slowing or cessation of the rate of increase of pressure head with increasing storm magnitude. This asymptotic piezometric pattern persisted through the largest storm measured during the study. Faster soil drainage suppressed pressure head response in larger storms with important process implications for pore pressure development and landslide hazard modelling. Copyright © 2012 John Wiley & Sons, Ltd.  相似文献   

12.
The hydraulic gradient comparison method is an inverse method for estimation of aquifer hydraulic conductivity (or trans-missivity) and boundary conductance for a ground water flow model under steady-state conditions. This method, following formal optimization techniques, defines its objective function to minimize differences between interpreted (observed) and simulated hydraulic gradients, which results in minimization of differences between observed and simulated hydraulic heads. The key features of this method are that (1) the derived optimality conditions have an explicit form with a clear hydrology concept that is con-sistent with Darcy's law, and (2) the derived optimality conditions are spatially independent as they are a function of only local hydraulic conductivity and local hydraulic gradient. This second feature allows a multidimensional optimization problem to be solved by many one-dimensional optimization procedures simultaneously, which results in a substantial reduction in computation time. The results of the numerical performance testing on a heterogeneous hypothetical case confirm that minimizing gradient residuals in the entire model domain leads to minimizing head residuals. Application of the method in real-world projects requires rigorous conceptual model development, use of a global calibration target, and an iterative calibration proess. The conceptual model development includes interpretation of a potentiometric surface and estimation of other hydrologic parameters. This method has been applied to a wide range of real-world modeling projects, including the Rocky Mountain Arsenal and Rocky Flats sites in Colorado, which demonstrates that the method is efficient and practical.  相似文献   

13.
Site characterization in densely fractured dolomite: comparison of methods   总被引：2，自引：0，他引：2  
One of the challenges in characterizing fractured-rock aquifers is determining whether the equivalent porous medium approximation is valid at the problem scale. Detailed hydrogeologic characterization completed at a small study site in a densely fractured dolomite has yielded an extensive data set that was used to evaluate the utility of the continuum and discrete-fracture approaches to aquifer characterization. There are two near-vertical sets of fractures at the site; near-horizontal bedding-plane partings constitute a third fracture set. Eighteen boreholes, including five coreholes, were drilled to a depth of approximately 10.6 m. Borehole geophysical logs revealed several laterally extensive horizontal fractures and dissolution zones. Flowmeter and short-interval packer testing identified which of these features were hydraulically important. A monitoring system, consisting of short-interval piezometers and multilevel samplers, was designed to monitor four horizontal fractures and two dissolution zones. The resulting network consisted of >70 sampling points and allowed detailed monitoring of head distributions in three dimensions. Comparison of distributions of hydraulic head and hydraulic conductivity determined by these two approaches suggests that even in a densely fractured-carbonate aquifer, a characterization approach using traditional long-interval monitoring wells is inadequate to characterize ground water movement for the purposes of regulatory monitoring or site remediation. In addition, traditional multiwell pumping tests yield an average or bulk hydraulic conductivity that is not adequate for predicting rapid ground water travel times through the fracture network, and the pumping test response does not appear to be an adequate tool for assessing whether the porous medium approximation is valid.  相似文献   

14.
In a tropical rainforest catchment, shallow piezometers respond almost instantaneously to rainfall, but the dominant ground water recharge mechanisms are not well understood. To improve understanding, the downward movement of soil water on a runoff plot was traced using tritiated water injected at 0·20 m below the surface which marks the lower boundary of active subsurface storm flow. The tritium pulse was translated slowly down the profile, apparently dominated by interstitial piston flow on the lines described by Zimmermann's theoretical model. This recharge mechanism accounted for about 35 per cent of rainfall or 50 per cent of throughfall. The pulse's advance may have also been delayed by the upward movement of soil water indicated by the distribution of hydraulic potential under different hydrological conditions. The result was an increase in soil water transit time particularly below 1·0 m. There was also evidence in the tracer profiles for rapid by-pass flow but the volumes concerned could not be quantified in this experiment.  相似文献   

15.
Channel expansions are common in both natural and artificial open channels. With increasing cross-sectional dimensions in an expansion, the flow decelerates. Due to separation of flow and subsequent eddy formation, a significant head loss is occurred along the transition. This study presents the results of experimental investigations on subcritical flow along the expansive transition of rectangular to trapezoidal channels. Also, a numerical simulation was developed using the finite volume method with Reynolds Stress turbulent model. Water surface profiles and velocity distributions of flow through the transition were measured experimentally and compared with the numerical results. Also, hydraulic efficiency of the transition and coefficient of energy head loss were calculated. The results show that with increasing the upstream Froude number, hydraulic efficiency of the transition and coefficient of energy head loss are decreased and increased, respectively. The results also showed the ability of numerical simulation for simulating the flow separation zones and bed shear stress along the transition for different inlet discharges and inflow Froude numbers.  相似文献   

16.
Petteri Alho  Joni Mkinen 《水文研究》2010,24(18):2578-2593
There have been a number of flume tests of flow round bends with idealized geometry and recently hydraulic simulations of such experiment. However, studies of hydraulic models in natural river bend are rather limited because of greater complexity of the flow characteristics and lack of detailed data. In this article, we study how 2D hydraulic model and raster‐based hydraulic parameter calculations predict flow characteristics on the natural point bar environment. We will compare calculations of various hydraulic parameters (velocity, bed shear stress and stream power) by the 2D model and the associated sedimentology of the point bars. As a result of comparison, the usability of the 2D model for flow‐form‐product relationship predictions will be evaluated in natural river bend environment. The study shows that the 2D model can be generally utilized to predict the flood‐generated flow‐form‐product relationship in coarse‐grained and structurally complex point bar environments with sand‐dominated bedload. For example, point bar sections submerged in water depths greater than 50 cm showed a relatively good match laterally between the model and sedimentological estimations. Furthermore, this approach allows us to estimate flood processes on a local scale in similar point bar environments with width–length ratio. The flow direction estimates of the 2D model coincided relatively well with the sedimentological estimations on the bar head. However, flow directions on the downstream section could not be modelled because the 2D model cannot handle the helicoidal flow of the river bend. Copyright © 2010 John Wiley & Sons, Ltd.  相似文献   

17.
Artesian springs are localized aquifer outlets that originate when pressurized ground water is allowed to rise to the surface. Computing artesian discharge directly is often subject to practical difficulties such as restricted accessibility, abundant vegetation or slow flow rates. These circumstances call for indirect approaches to quantify flow. This paper presents a method to estimate ground water discharge through an upwelling spring by means of a three‐layer steady‐state groundwater flow model. Model inputs include on‐site measurements of vertical sediment permeability, sediment temperatures and hydraulic gradients. About 70 spring bed piezometers were used to carry out permeability tests within the spring sediments, as well as to quantify the hydraulic head at different depths below the discharge point. Sediment temperatures were measured at different depths and correlated to permeabilities in order to demonstrate the potential of temperature as a substitute for cumbersome slug tests. Results show that the spatial distribution of discharge through the spring bottom is highly heterogeneous, as sediment permeability varies by several orders of magnitude within centimetres. Sensitivity analyses imply that geostatistical interpolation is irrelevant to the results if field datasets come from a sufficiently high resolution of piezometric records. Copyright © 2013 John Wiley & Sons, Ltd.  相似文献   

18.
The coupled flow-mass transport inverse problem is formulated using the maximum likelihood estimation concept. An evolutionary computational algorithm, the genetic algorithm, is applied to search for a global or near-global solution. The resulting inverse model allows for flow and transport parameter estimation, based on inversion of spatial and temporal distributions of head and concentration measurements. Numerical experiments using a subset of the three-dimensional tracer tests conducted at the Columbus, Mississippi site are presented to test the model's ability to identify a wide range of parameters and parametrization schemes. The results indicate that the model can be applied to identify zoned parameters of hydraulic conductivity, geostatistical parameters of the hydraulic conductivity field, angle of hydraulic conductivity anisotropy, solute hydrodynamic dispersivity, and sorption parameters. The identification criterion, or objective function residual, is shown to decrease significantly as the complexity of the hydraulic conductivity parametrization is increased. Predictive modeling using the estimated parameters indicated that the geostatistical hydraulic conductivity distribution scheme produced good agreement between simulated and observed heads and concentrations. The genetic algorithm, while providing apparently robust solutions, is found to be considerably less efficient computationally than a quasi-Newton algorithm.  相似文献   

19.
The Differential System Method (DSM) permits identification of the physical parameters of finite-difference groundwater flow models in a confined aquifer when piezometric head and source terms are known at each point of the finite-difference lattice for at least two independent flow situations for which the hydraulic gradients are not parallel. Since piezometric head data are usually few and sparse, interpolation of the measured data onto a regular grid can be performed with geostatistical techniques. We apply kriging to the sparse data of a synthetic aquifer to evaluate the stability of the DSM with respect to uncorrelated measurement errors and interpolation errors. The numerical results show that the DSM is stable.  相似文献   

20.
The Differential System Method (DSM) permits identification of the physical parameters of finite-difference groundwater flow models in a confined aquifer when piezometric head and source terms are known at each point of the finite-difference lattice for at least two independent flow situations for which the hydraulic gradients are not parallel. Since piezometric head data are usually few and sparse, interpolation of the measured data onto a regular grid can be performed with geostatistical techniques. We apply kriging to the sparse data of a synthetic aquifer to evaluate the stability of the DSM with respect to uncorrelated measurement errors and interpolation errors. The numerical results show that the DSM is stable.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号