首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
A new model is proposed for the structure of the Kaapvaal craton lithosphere. Based on chemical thermodynamics methods, profiles of the chemical composition, temperature, density, and S wave velocities are constructed for depths of 100–300 km. A solid-state zone of lower velocities is discovered on the S velocity profile in the depth interval 150–260 km. The temperature profiles are obtained from absolute values of P and S velocities, taking into account phase transformations, anharmonicity, and anelastic effects. The examination of the sensitivity of seismic models to the chemical composition showed that relatively small variations in the composition of South African xenoliths result in lateral temperature variations of ～200°C. Inversion of some seismic profiles (including IASP91) with a fixed bulk composition of garnet peridotites (the primitive mantle material) leads to a temperature inversion at depths of 200–250 km, which is physically meaningless. It is supposed that the temperature inversion can be removed by gradual fertilization of the mantle with depth. In this case, the craton lithosphere should be stratified in chemical composition. The depleted lithosphere composed by garnet peridotites exists to depths of 175–200 km. The lithospheric material at depths of 200–250 km is enriched in basaltoid components (FeO, Al2O3, and CaO) as compared with the material of garnet peridotites but is depleted in the same components as compared with the fertile substance of the underlying primitive mantle. The material composing the craton root at a depth of ～275 km does not differ in its physical and chemical characteristics from the composition of the normal mantle, and this allows one to estimate the thickness of the lithosphere at 275 km. The results of this work are compared with data of seismology, thermal investigations, and thermobarometry.  相似文献   

2.
The elastic moduli of polycrystalline ringwoodite, (Mg0.91Fe0.09)2SiO4, were measured up to 470 K by means of the resonant sphere technique. The adiabatic bulk (KS) and shear (μ) moduli were found to be 185.1(2) and 118.22(6) GPa at room temperature, and the average slopes of dKS/dT and dμ/dT in the temperature range of the study were determined to be −0.0193(9) and −0.0148(3) GPa/K, respectively. Using these results, we estimate seismic wave velocity jumps for a pure olivine mantle model at 520 km depth. We find that the jump for the S-wave velocity is about 1.5 times larger than that for the P-wave velocity at this depth. This suggests that velocity jumps at the 520 km discontinuity are easier to detect using S-waves than P-waves.  相似文献   

3.
A layeredP- andS-wave velocity model is obtained for the Friuli seismic area using the arrival time data ofP- andS-waves from local earthquakes. A damped least-squares method is applied in the inversion.The data used are 994P-wave arrival times for 177 events which have epicenters in the region covered by the Friuli seismic network operated by Osservatorio Geofisico sperimentale (OGS) di Trieste, which are jointly inverted for the earthquake hypocenters andP-wave velocity model. TheS-wave velocity model is estimated on the basis of 978S-wave arrival times and the hypocenters obtained from theP-wave arrival time inversion. We also applied an approach thatP- andS-wave arrival time data are jointly used in the inversion (Roecker, 1982). The results show thatS-wave velocity structures obtained from the two methods are quite consistent, butP-wave velocity structures have obvious differences. This is apparent becauseP-waves are more sensitive to the hypocentral location thanS-waves, and the reading errors ofS-wave arrival times, which are much larger than those ofP-waves, bring large location errors in the joint inversion ofP- andS-wave arrival time. The synthetic data tests indicated that when the reading errors ofS-wave arrivals are larger than four times that ofP-wave arrivals, the method proposed in this paper seems more valid thanP- andS-wave data joint inversion. Most of the relocated events occurred in the depth range between 7 and 11 km, just above the biggest jump in velocity. This jump might be related to the detachment line hypothesized byCarulli et al. (1982). From the invertedP- andS-wave velocities, we obtain an average value 1.82 forV p /V s in the first 16 km depth.  相似文献   

4.
A new method of reconstruction of the temperature profile in the lunar mantle from the velocities of seismic P- and S-waves for different models of chemical composition is developed. The procedure of the solution of an inverse problem is realized with the help of the minimization of the Gibbs free energy and the equations of state of a mantle substance, taking into account phase transformations, anharmonicity, and the effects of inelasticity. The geophysical and geochemical constraints on composition and temperature distribution in Moon’s mantle are established. The upper mantle can be composed of olivine pyroxenite, depleted by low-volatile oxides (∼2 wt % of CaO and Al2O3). On the contrary, the lower mantle must be enriched by low-volatile oxides (∼4–6 wt % of CaO and Al2O3). Its composition can be represented by a mineral association of the olivine + clinopyroxene + garnet or olivine + orthopyroxene + clinopyroxene + garnet type, which is close in composition to pyrolite. The temperature distribution at depths 50–1000 km are approximated by the equation: T(°C) = 351 + 1718[1–exp (−0.00082H)]. The constraints inferred make it possible to conclude that the published values of the velocities of P- and S-waves for the lunar mantle, obtained by processing the data of seismic experiments of the Apollo lunar mission are inconsistent with each other at depths below 300 km. Otherwise, the variations in the velocities of P- and S-waves disturb the symmetry between the petrological model (composition), the temperature profile, and the seismic profile.  相似文献   

5.
Using simulated data, it is demonstrated that one may estimate the body wave velocity in the crust by measuring the angle of incidence ofP-waves provided only the very first part of the signal is used. This angle has been measured for a set ofP-waves at the NORSAR long period instrument sites. Combining these observations with measurements of apparent velocities, we find that the data indicates a crust velocity of 6.1±0.4 km/sec. While it is somewhat uncertain to what depth the value is representative, the observations are in obvious disagreement with previous authors who concluded that long periodP-waves were not affected by the earth's crust. Because of difficulties in separating the effects of real velocity variations from measurement errors, the details of the observedP-wave variation across the array are difficult to interpret. The consistent behavior of the data does, however, indicate that variations of approximately 3% must exist in the crustalP-wave velocity across the array.  相似文献   

6.
—Anisotropy in the subcontinental lithosphere becomes increasingly important, because it is observed in many seismic studies especially for P n -waves. Typical rocks of the uppermost mantle are peridotites, which predominantly exhibit a pronounced elastic anisotropy. This anisotropy is mainly caused by the anisotropic elastic properties and the lattice preferred orientation (here referred to as texture) of olivine. To evaluate the elastic anisotropy of peridotites from the subcontinental lithosphere, specimens of the Northern Hessian Depression (Germany) and the Balmuccia Ultramafic Massif (Northern Italy) have been used. They comprise four olivine texture types, which are characteristic for olivine textures observed worldwide. The bulk rock elastic properties have been calculated using olivine and orthopyroxene textures, their single-crystal elastic constants at ambient pressure/temperature conditions and their volume fraction. Clinopyroxene and spinel are assumed to be randomly distributed. The effect of four different orientations of the foliation within the uppermost mantle has been evaluated, since this orientation is usually unknown.¶Two of the olivine textures have a pronounced azimuthal dependence of compressional waves when a horizontal foliation within the uppermost mantle is presumed. These variations cause significant azimuthal variations of the P-wave reflections coefficients at the Moho. Primarily, we predict a significant azimuthal dependence of the critical points where the reflected amplitude increases from approximately 15% to 95%. Possibly, these azimuthal variations can be detected by seismic reflection measurements carried out at earth surface.¶The remaining two texture types only manifest a small directional dependence. When anisotropy of compressional waves is observed in seismic studies, these latter types can only be of subordinate importance. However, all of the peridotites investigated are able to explain the seismically observed azimuthal variations of compressional waves when a vertical foliation is proposed. This ambiguity can be substantially reduced when shear waves (S-waves) are considered. The directional distribution of S-wave velocities and of the S-wave splitting exhibits characteristic patterns for the different olivine texture types. This could be used to discriminate between different texture types and orientations of the foliation within the uppermost mantle. A fundamental requirement for a more comprehensive interpretation is the availability of detailed S-wave observations. The maximum S-wave splitting in the peridotites investigated coincides with the maximum of the faster (leading) S-wave. This may be of importance to detect S-wave splitting in future seismic studies.  相似文献   

7.
The P- and S-wave receiver functions and dispersion curves of the fundamental Rayleigh wave are used to study the lithosphere within the Central Anatolian Plateau. The results for eight broadband seismic stations are presented. It is established that within the plateau, the crust with a thickness of about 35 km is underlain by the mantle lid with its bottom at a depth of about 60 km. The velocities of longitudinal (Vp) and shear (Vs) waves in this layer are at most 7.6 and 4.5 km/s, respectively, and the Vp/Vs ratio is close to 1.7 (i.e., by 6% lower than in the standard IASP91 and PREM models). Such a low velocity ratio is characteristic of rocks having high orthopyroxene content. Beneath the high-velocity mantle lid, the S-wave velocity decreases to 4.0–4.2 km/s and the Vp/Vs ratio is close to its standard value (1.8). At most stations, the P-wave receiver functions do not contain seismic phase P410s, which is formed at the global seismic boundary at a depth of 410 km. The seismic boundary at a depth of 410 km is related to the olivine-spinel phase transformation, and its absence can indicate the anomalously low olivine content and high basalt content. This anomaly is probably associated with the subduction of a large amount of oceanic crust during the closure of the Tethys. The results of the study overall indicate the high informativity of the used method.  相似文献   

8.
For studying the structure of the lithosphere in southern Ukraine, wide-angle seismic studies that recorded the reflected and refracted waves were carried out under the DOBRE-4 project. The field works were conducted in October 2009. Thirteen chemical shot points spaced 35–50 km apart from each other were implemented with a charge weight varying from 600 to 1000 kg. Overall 230 recording stations with an interval of 2.5 km between them were used. The high quality of the obtained data allowed us to model the velocity section along the profile for P- and S-waves. Seismic modeling was carried out by two methods. Initially, trial-and-error ray tracing using the arrival times of the main reflected and refracted P- and S-phases was conducted. Next, the amplitudes of the recorded phases were analyzed by the finite-difference full waveform method. The resulting velocity model demonstrates a fairly homogeneous structure from the middle to lower crust both in the vertical and horizontal directions. A drastically different situation is observed in the upper crust, where the V p velocities decrease upwards along the section from 6.35 km/s at a depth of 15–20 km to 5.9–5.8 km/s on the surface of the crystalline basement; in the Neoproterozoic and Paleozoic deposits, it diminishes from 5.15 to 3.80 km/s, and in the Mesozoic layers, it decreases from 2.70 to 2.30 km/s. The subcrustal V p gradually increases downwards from 6.50 to 6.7–6.8 km/s at the crustal base, which complicates the problem of separating the middle and lower crust. The V p velocities above 6.80 km/s have not been revealed even in the lowermost part of the crust, in contrast to the similar profiles in the East European Platform. The Moho is clearly delineated by the velocity contrast of 1.3–1.7 km/s. The alternating pattern of the changes in the Moho depths corresponding to Moho undulations with a wavelength of about 150 km and the amplitude reaching 8 to 17 km is a peculiarity of the velocity model.  相似文献   

9.
The existence of uncoupled shear (S) and compression (P) wave velocity variations in Earth's mantle is a characteristic that might only be explained by the presence of significant chemical and/or phase heterogeneity, with important implications for the dynamics and evolution of Earth's interior. While making a one-to-one comparison between tomographic models for P and S velocity (VP and VS) variations for a particular geographic region is ill-posed, their global statistical distributions reveal several robust characteristics indicative of the nature of uncoupled VP and VS in the deep mantle. We find that all of the VP and VS model distributions at a given depth are Gaussian-like throughout the lowermost mantle. However, a distinct low velocity feature is present in VS distributions below ≈ 2200 km depth that is not present or is relatively weak in VP models. The presence of anomalously low VS material cannot be explained as an artifact, nor can the absence of a similarly strong feature in P models be ascribed to under-resolution. We propose that this feature can be partly explained by laterally variable occurrences of post-perovskite (pPv) lenses in the D″ layer, however, the persistence of significantly slow VS regions at heights up to ≈ 700 km or more above the core–mantle boundary is likely to be incompatible with a pPv origin and might only be explained by the presence of a laterally discontinuous layer of chemically distinct material and/or some other kind of phase heterogeneity. There also exist significant discrepancies between tomographic models with respect to the width of the distributions as well as differences between the modeled peak values. We propose a scheme for comparison between different seismic models in which the widths of the dominant features in their statistical distributions is exploited.  相似文献   

10.
Summary P n velocities determined from seismic refraction measurements, show significant differences between Southern Finland (7.96 km/sec) and Southeastern Norway (8.20 km/sec). TheP n/Sn velocity ratios (k) were determined from earthquake and explosion data, and the observed variation ofk indicates lateral variations in theP n and/orS n velocities in Fennoscandia.  相似文献   

11.
Wave Generation from Explosions in Rock Cavities   总被引：1，自引：0，他引：1  
—?We have developed a measurement method to monitor P- and S-waves generated from laboratory-scale explosions in meter-sized rock samples at a series of stations, as well as invented a device to drill spherical cavities in rock, with diameters up to 10?centimeters. We applied these to experiments in Bedford limestone in which spherical/cylindrical explosives (0.2 to 1.9?g) were centrally placed in 1.2- to 3-cm diameter cavities. Stress waves generated by the explosions were recorded within a radius of 25?cm. The radial stress wave records and post-explosion studies demonstrate that S-waves are generated from explosions in cavities as a result of both wave mode-conversion from the cavity wall and crack propagation in rocks. The experimental results of wave generation from the explosions in spherical and cylindrical cavities demonstrate the cavity geometrical effect on the resulting wave pattern. The P- and S-waves generated by explosions and crack propagation in rocks are analyzed. A simple analytic model for P-wave generation is proposed to explain the differences of P-wave-induced displacement histories between the observed waveforms and those predicted by a step-pressure source. Generally, the qualitative predictions of this model fit the observations. The present results demonstrate the importance of rock cracking and cavities in P- and S-wave generation.  相似文献   

12.
—More than 60 events recorded by four recently deployed seismic broadband stations around Scotia Sea, Antarctica, have been collected and processed to obtain a general overview of the crust and upper mantle seismic velocities.¶Group velocity of the fundamental mode of Rayleigh waves in the period between 10 s to 30–40 s is used to obtain the S-wave velocity versus depth along ten different paths crossing the Scotia Sea region. Data recorded by two IRIS (Incorporated Research Institutions for Seismology) stations (PMSA, EFI) and the two stations of the OGS-IAA (Osservatorio Geofisico Sperimentale—Instituto Antarctico Argentino) network (ESPZ, USHU) are used.¶The Frequency-Time Analysis (FTAN) technique is applied to the data set to measure the dispersion properties. A nonlinear inversion procedure, "Hedgehog," is performed to retrieve the S-wave velocity models consistent with the dispersion data.¶The average Moho depth variation on a section North to South is consistent with the topography, geological observations and Scotia Sea tectonic models.¶North Scotia Ridge and South Scotia Ridge models are characterised by similar S-wave velocities ranging between 2.0 km/s at the surface to 3.2 km/s to depths of 8 km/s. In the lower crust the S-wave velocity increases slowly to reach a value of 3.8 km/s. The average Moho depth is estimated between 17 km to 20 km and 16 km to 19 km, respectively, for the North Scotia Ridge and South Scotia Ridge, while the Scotia Sea, bounded by the two ridges, has a faster and thinner crust, with an average Moho depth between 9 km and 12 km.¶On other paths crossing from east to west the southern part of the Scotia plate and the Antarctic plate south of South Scotia Ridge, we observe an average Moho depth between 14 km and 18 km and a very fast upper crust, compared to that of the ridge. The S-wave velocity ranges between 3.0 and 3.6 km/s in the thin (9–13 km) and fast crust of the Drake Passage channel. In contrast the models for the tip of the Antarctic Peninsula consist of two layers with a large velocity gradient (2.3–3.0 km/s) in the upper crust (6-km thick) and a small velocity gradient (3.0–4.0) in the lower crust (14-km thick).  相似文献   

13.
Arrival times of P and S waves from local earthquakes in the Kamchatka area of the Kurile-Kamchatka Island Arc are used for calculating a spatial model of the elastic wave velocity distribution to a depth of 200 km. The lithosphere is shown to be strongly stratified in its velocity properties and laterally heterogeneous within the mantle wedge and seismic focal zone. A lower velocity layer (an asthenospheric wedge) is identified at depths of 70–130 km beneath the Eastern Kamchatka volcanic belt. The morphology of the Moho interface and the velocity properties of the crust are studied. The main tectonic structures of the region are shown to be closely interrelated with deep velocity heterogeneities. Regular patterns in the statistics of the earthquakes are analyzed in relation to variations in the elastic wave velocities in the focal layer. A mechanism of lithospheric block displacements along weakened zones of the lower crust and upper mantle is proposed.  相似文献   

14.
A polycrystalline specimen of clinopyroxene diopside has been hot-pressed at P = 15 kbar and T = 850°C in a piston-cylinder apparatus. Compressional (νP) and shear (νS) velocities are determined as a function of pressure to 7.5 kbar at room temperature by an ultrasonic pulse transmission technique. The velocities at 7.5 kbar are νP = 8.06 km/sec and νS = 4.77 km/sec. These data are consistent with velocity-density trends for orthopyroxenes due to the compensating effects of the monoclinic structure (positive) and Ca content (negative). With the addition of the new data for diopside, it is possible to calculate directly the velocities of various upper-mantle mineral assemblages.  相似文献   

15.
A self-consistent approach is proposed for the investigation of the thermal conditions, chemical composition, and internal structure of the upper mantle of the Earth. Using this approach, the thermal state of the lithospheric mantle beneath the Siberian Craton (SC) is reconstructed from P velocities, taking into account the phase transitions, anharmonicity, and the effects of anelasticity. The velocities of seismic waves are more sensitive to temperature than to the composition of the mantle rocks, which allows the velocity models to be effectively used for reconstruction of the thermal regime of the mantle. The temperature at depths 100–300 km is reconstructed by inversion of the Kraton and Kimberlit superlong seismic profiles for compositions of the garnet harzburgite, lherzolite, and intermediate composition of garnet peridotite. The averaged temperature in the normal continental mantle is reconstructed by inversion of the IASP91 reference model for depleted and fertile substance. One-dimensional models and two-dimensional thermal fields undergo a substantial fall in temperature (～300–600°C) beneath the Siberian Craton as compared to the temperatures of the continental mantle and paleotemperatures inferred from the thermobarometry of xenoliths. Temperature profiles of the Siberian Craton deduced from seismic data lie between the conductive geotherms of 32.5–40.0 mW/m2 and below the P(H)-T values obtained for low- and high-temperature xenoliths from the Mir, Udachnaya, and Obnazhennaya kimberlite pipes. The thickness of the thermal lithosphere estimated from the intersection with the potential adiabat is 300–320 km, which is consistent with the data on heat flows and seismotomographic observations. This provides grounds for the assumption that the low-temperature anomalies (thermal roots of continents) penetrate down to a depth of 300 km. The analysis of the sensitivity of seismic velocity and density to the variations in temperature, pressure, and chemical and phase composition of petrological models shows that recognition of fine differences in chemical composition of the lithospheric rocks by seismic methods is impossible.  相似文献   

16.
The results of solving the inverse problem of forced nutations and free oscillations of the Earth by decomposing the Q-factor and small depth variations in density in a system of orthogonal functions are considered. These functions are determined by orthogonalization of the functional derivatives of the observed parameters with respect to the depth distributions of the sought parameters (assuming there are no distributions of the velocities of body seismic waves V p and V S with depth and unchanged total mass M and inertia moments I of the Earth). The examples are presented to illustrate the numerical solution of the inverse problem on finding the density distributions in the mantle and core of the Earth using orthogonalization of the integral constraints for the probable depth distributions of density describing the conditions of unchanged M and I, as well as the constraints posed by the data on the periods of the free low-order oscillations of the Earth.  相似文献   

17.
Parametrically simple earth models consistent with geophysical data   总被引：1，自引：0，他引：1  
We present a set of three parametric earth models (PEM) in which radial variations of the density and velocities are represented by piecewise continuous analytical functions of radius (polynomials of order not higher than the third). While all three models are identical below a depth of 420 km, models PEM-O and PEM-C are designed to reflect the different properties of the oceanic and continental upper mantles, respectively. The third model PEM-A is a representation of an average earth.The data used in inversion consist of observations of eigenperiods for 1064 normal modes, 246 travel times of body waves for five different phases and regional surface-wave dispersion data extending to periods as short as 20 seconds. Agreement of the functionals derived for the PEM models with the appropriate observations is satisfactory. In particular, the fit of free-oscillation data is comparable to that obtained in inversion studies in which constraints imposed on the smoothness of structure were not as severe as in our study.Our density distribution for all depths greater than 670 km is consistent with the Adams-Williamson equation to within 0.2% maximum deviation, and these minute departures result only from the limitations imposed by the parametric simplicity of our models. We also show that the velocities in the lower mantle are consistent with the complete third-order finite-strain theory to within 0.2% for VP and 0.4% for VS (r.m.s. relative deviations). The derived pressure derivatives of the velocities are very similar to those obtained for corundum structures in laboratory experiments.We conclude that any departures from homogeneity and adiabaticity within the inner core, outer core or lower mantle must be very small, and that introduction of such deviations is not necessary on the basis of the available observational evidence.  相似文献   

18.
Records of deep-focus Hindu Kush earthquakes in the depth ranges 70–110 and 190–230 km made by 45 digital and analogue seismic stations were analyzed to study the attenuation field of short period seismic waves in the lithosphere of central Tien Shan. The dynamic characteristics studied include the ratio of peak amplitudes in S and P waves (S/P) and the ratio of the S-wave maximum to the coda level in the range t = 400 ± 5 s, where t is the lapse time (S/c400) for 1.25 Hz. Comparatively high values of S/P are shown to prevail in most of the area, corresponding to lower S-wave attenuation. Upon this background is a band of high and intermediate attenuation in the west of the area extending along the Talas-Fergana fault in the south and afterwards turning north-northeast. The rupture areas of the two largest (M ≥ 7.0) earthquakes which have occurred in Tien Shan during the last 25 years are confined to this band. Abnormally high values of S/c400 were obtained for stations situated in the rupture zone of the August 19, 1992, magnitude 7.3 Suusamyr earthquake and around it. For two of the stations we found considerable time variations in the coda envelope before the earthquake. The effective Q was derived from compressional and shear wave data for the entire area, as well as for the band of high attenuation. Comparison with previous data shows that the attenuation field in the area has changed appreciably during 20–25 years, which can only be due to a rearrangement of the fluid field in the crust and uppermost mantle. It is hypothesized that a large earthquake is very likely to occur in the northern part of the attenuating band.  相似文献   

19.
The crustal structure in Myanmar can provide valuable information for the eastern margin of the ongoing Indo-Eurasian collision system. We successively performed H–k stacking of the receiver function and joint inversion of the receiver function and surface wave dispersion to invert the crustal thickness (H), shear wave velocity (VS), and the VP/VS ratio (k) beneath nine permanent seismic stations in Myanmar. H was found to increase from 26 ?km in the south and east of the study area to 51 ?km in the north and west, and the VP/VS ratio was complex and high. Striking differences in the crust were observed for different tectonic areas. In the Indo-Burma Range, the thick crust (H ?～ ?51 ?km) and lower velocities may be related to the accretionary wedge from the Indian Plate. In the Central Myanmar Basin, the thin crust (H ?= ?26.9–35.5 ?km) and complex VP/VS ratio and VS suggest extensional tectonics. In the Eastern Shan Plateau, the relatively thick crust and normal VP/VS ratio are consistent with its location along the western edge of the rigid Sunda Block.  相似文献   

20.
Using acoustic measurement interfaced with a large volume multi-anvil apparatus in conjunction with in situ X-radiation techniques, we are able to measure the density and elastic wave velocities (VP and VS) for both ortho- and high-pressure clino-MgSiO3 polymorphs in the same experimental run. The elastic bulk and shear moduli of the unquenchable high-pressure clinoenstatite phase were measured within its stability field for the first time. The measured density contrast associated with the phase transition OEN → HP-CEN is 2.6-2.9% in the pressure of 7-9 GPa, and the corresponding velocity jumps are 3-4% for P waves and 5-6% for S waves. The elastic moduli of the HP-CEN phase are KS=156.7(8) GPa, G = 98.5(4) GPa and their pressure derivatives are KS′=5.5(3) and G′ = 1.5(1) at a pressure of 6.5 GPa, room temperature. In addition, we observed anomalous elastic behavior in orthoenstatite at pressure above 9 GPa at room temperature. Both elastic wave velocities exhibited softening between 9 and 13-14 GPa, which we suggest is associated with a transition to a metastable phase intermediate between OEN and HP-CEN.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号