共查询到20条相似文献，搜索用时 31 毫秒
1.
Dynamic two‐phase interaction of soil can be modelled by a displacement‐based, two‐phase formulation. The finite element method together with a semi‐implicit Euler–Cromer time‐stepping scheme renders a discrete equation that can be solved by recursion. By experience, it is found that the CFL stability condition for undrained wave propagation is not sufficient for the considered two‐phase formulation to be numerically stable at low values of permeability. Because the stability analysis of the two‐phase formulation is onerous, an analysis is performed on a simplified two‐phase formulation that is derived by assuming an incompressible pore fluid. The deformation of saturated porous media is now captured in a single, second‐order partial differential equation, where the energy dissipation associated with the flow of the fluid relative to the soil skeleton is represented by a damping term. The paper focuses on the different options to discretize the damping term and its effect on the stability criterion. Based on the eigenvalue analyses of a single element, it is observed that in addition to the CFL stability condition, the influence of the permeability must be included. This paper introduces a permeability‐dependent stability criterion. The findings are illustrated and validated with an example for the dynamic response of a sand deposit. Copyright © 2015 John Wiley & Sons, Ltd. 相似文献
2.
Numerical prediction of gas migration properties in Callovo‐Oxfordian (COx) argillite using morpho‐mathematical operations 
下载免费PDF全文
下载免费PDF全文 The feasibility study of long‐term radioactive waste storage in low‐permeable rocks has been performed by considering various damage and failure scenarios. This study aims at the numerical investigation of gas (mainly produced by corrosion of metallic parts) migration properties through the low‐permeable formation of Callovo‐Oxfordian argillite. Traditional methods, based on macroscopic approaches or homogeneous transport properties, are inappropriate to analyze this issue at the mesoscopic/microscopic scale. In this study, realistic porous space morphologies are constructed through union of excursions of random fields considering different experimental pore size distributions. Afterwards, purely geometric analysis of pore space is conducted by morpho‐mathematical operations for the purpose of the extraction of preferential gas transport pathways and the prediction of the gas entry pressure, the gas breakthrough pressure, and the following imbibition process. 相似文献
3.
Three porous media flow problems, in which the fluid mechanical interactions are critical, are studied in a mesoscopic–microscopic coupling system. In this system, fluid flow in the pore space is explicitly modeled at mesoscopic level by the lattice Boltzmann method, the geometrical representation and the mechanical behavior of the solid skeleton are modeled at microscopic level by the particulate distinct element method (DEM), and the interfacial interaction between the fluid and the solids is resolved by an immersed boundary scheme. In the first benchmark problem, the well‐known and frequently utilized Ergun equation is validated in periodic particle and periodic pore models. In the second problem, the upward seepage problem is simulated over three stages: The settlement of the column of sphere under gravity loading is measured to illustrate the accuracy of the DEM scheme; the system is solved to hydrostatic state with pore space filled with fluid, showing that the buoyancy effect is captured correctly in the mesoscopic–microscopic coupling system; then, the flow with constant rate is supplied at the bottom of the column; the swelling of the ground surface and pore pressure development from the numerical simulation are compared with the predictions of the macroscopic consolidation theory. In the third problem, the fluid‐flow‐induced collapse of a sand arch inside a perforation cavity is tested to illustrate a more practical application of the developed system. Through comparing simulation results with analytical solutions, empirical law and physical laboratory observations, it is demonstrated that the developed lattice Boltzmann–distinct element coupling system is a powerful fundamental research tool for investigating hydromechanical physics in porous media flow. Copyright © 2012 John Wiley & Sons, Ltd. 相似文献
4.
In this paper, a numerical model is developed for the fully coupled hydro‐mechanical analysis of deformable, progressively fracturing porous media interacting with the flow of two immiscible, compressible wetting and non‐wetting pore fluids, in which the coupling between various processes is taken into account. The governing equations involving the coupled solid skeleton deformation and two‐phase fluid flow in partially saturated porous media including cohesive cracks are derived within the framework of the generalized Biot theory. The fluid flow within the crack is simulated using the Darcy law in which the permeability variation with porosity because of the cracking of the solid skeleton is accounted. The cohesive crack model is integrated into the numerical modeling by means of which the nonlinear fracture processes occurring along the fracture process zone are simulated. The solid phase displacement, the wetting phase pressure and the capillary pressure are taken as the primary variables of the three‐phase formulation. The other variables are incorporated into the model via the experimentally determined functions, which specify the relationship between the hydraulic properties of the fracturing porous medium, that is saturation, permeability and capillary pressure. The spatial discretization is implemented by employing the extended finite element method, and the time domain discretization is performed using the generalized Newmark scheme to derive the final system of fully coupled nonlinear equations of the hydro‐mechanical problem. It is illustrated that by allowing for the interaction between various processes, that is the solid skeleton deformation, the wetting and the non‐wetting pore fluid flow and the cohesive crack propagation, the effect of the presence of the geomechanical discontinuity can be completely captured. Copyright © 2012 John Wiley & Sons, Ltd. 相似文献
5.
Air sparging (AS) is an in situ soil/groundwater remediation technology, which involves the injection of pressurized air/oxygen through an air sparging well below the zone of contamination. Characterizing the mechanisms governing movement of air through saturated porous media is critical for the design of an effective cleanup treatment system. In this research, micromechanical investigation was performed to understand the physics of air migration and subsequent spatial distribution of air at pore scale during air sparging. The void space in the porous medium was first characterized by pore network consisting of connected pore bodies and bonds. The biconical abscissa asymmetric concentric bond was used to describe the connection between two adjacent pore bodies. Then a rule‐based dynamic two‐phase flow model was developed and applied to the pore network model. A forward integration of time was performed using the Euler scheme. For each time step, the effective viscosity of the fluid was calculated based on fractions of two phases in each bond, and capillary pressures across the menisci was considered to compute the pressure field. The developed dynamic model was used to study the rate‐dependent drainage during air sparging. The effect of the capillary number and geometrical properties of the network on the dynamic flow properties of two‐phase flow including residual saturation, spatial distribution of air and water, dynamic phase transitions, and relative permeability‐capillary pressure curves were systematically investigated. Results showed that all the above information for describing the air water two‐phase flow are not intrinsic properties of the porous medium but are affected by the two‐phase flow dynamics and spatial distribution of each phase, providing new insight to air sparging. Copyright © 2012 John Wiley & Sons, Ltd. 相似文献
6.
This paper investigates the two‐dimensional flow problem through an anisotropic porous medium containing several intersecting curved fractures. First, the governing equations of steady‐state fluid flow in a fractured porous body are summarized. The flow follows Darcy's law in matrix and Poiseuille's law in fractures. An infinite transversal permeability is considered for the fractures. A multi‐region boundary element method is used to derive a general pressure solution as a function of discharge through the fractures and the pressure and the normal flux on the domain boundary. The obtained solution fully accounts for the interaction and the intersection between fractures. A numerical procedure based on collocation method is presented to compute the unknowns on the boundaries and on the fractures. The numerical solution is validated by comparing with finite element solution or the results obtained for an infinite matrix. Pressure fields in the matrix are illustrated for domains containing several interconnected fractures, and mass balance at the intersection points is also checked. Copyright © 2013 John Wiley & Sons, Ltd. 相似文献
7.
The purpose of this paper is to simulate the coupled dynamic deformation and water flow that occur in saturated soils when subjected to traffic loads, which is a problem with several practical applications. The wave propagation causes vibrations leading to discomfort for passengers and people in the surroundings and increase wear on both the vehicle and road structure. The water flow may cause internal erosion and material transport in the soil. Further, the increased pore water pressure could reduce the bearing capacity of embankments. The saturated soil is modelled as a water‐saturated porous medium. The traffic is modelled as a number of moving wheel contact loads. Dynamic effects are accounted for, which lead to a coupled problem with solid displacements, water velocity and pressure as primary unknowns. A finite element program has been developed to perform simulations. The simulations clearly demonstrate the induced wave propagation and water flow in the soil. The simulation technique is applicable to railway as well as road traffic. Copyright © 2007 John Wiley & Sons, Ltd. 相似文献
8.
In this paper, 3D steady‐state fluid flow in a porous medium with a large number of intersecting fractures is derived numerically by using collocation method. Fluid flow in the matrix and fractures is described by Darcy's law and Poiseuille's law, respectively. The recent theoretical development presented a general potential solution to model the steady‐state flow in fractured porous media under a far‐field condition. This solution is a hypersingular integral equation with pressure field in the fracture surfaces as the main unknown. The numerical procedure can resolve the problem for any form of fractures and also takes into account the interactions and the intersection between fractures. Once the pressure field and then the flux field in fractures have been determined, the pressure field in the porous matrix is computed completely. The basic problem of a single fracture is investigated, and a semi‐analytical solution is presented. Using the solution obtained for a single fracture, Mori‐Tanaka and self‐consistent schemes are employed for upscaling the effective permeability of 3D fractured porous media. Copyright © 2012 John Wiley & Sons, Ltd. 相似文献
9.
This paper presents a numerical model for the elasto‐plastic electro‐osmosis consolidation of unsaturated clays experiencing large strains, by considering electro‐osmosis and hydro‐mechanical flows in a deformable multiphase porous medium. The coupled governing equations involving the pore water flow, pore gas flow, electric flow and mechanical deformation in unsaturated clays are derived within the framework of averaging theory and solved numerically using finite elements. The displacements of the solid phase, the pressure of the water phase, the pressure of the gas phase and the electric potential are taken as the primary unknowns in the proposed model. The nonlinear variation of transport parameters during electro‐osmosis consolidation are incorporated into the model using empirical expressions that strongly depend on the degree of water saturation, whereas the Barcelona Basic Model is employed to simulate the elasto‐plastic mechanical behaviour of unsaturated clays. The accuracy of the proposed model is evaluated by validating it against two well‐known numerical examples, involving electro‐osmosis and unsaturated soil behaviour respectively. Two further examples are then investigated to study the capability of the computational algorithm in modelling multiphase flow in electro‐osmosis consolidation. Finally, the effects of gas generation at the anode, the deformation characteristics, the degree of saturation and the time dependent evolution of the excess pore pressure are discussed. Copyright © 2016 John Wiley & Sons, Ltd. 相似文献
10.
A standing wave in front of a seawall may reach a height more than twice of its incident component. When excess pore pressure occurs, it may even induce seabed instability, hence endangering the structure. This issue was studied previously using only linear wave theory. In this paper, standing‐wave theory to a second‐order approximation is applied, in order to demonstrate the differences between these two solutions. The spatial and temporal variations in the instantaneous pore pressure are first calculated, in addition to their vertical distributions. The effects of wave height, water depth and the degree of soil saturation on pore pressure distributions are then discussed, followed by the net pore pressure averaged over one wave cycle. The results suggest the existence of a residual pore pressure in the seabed and its net pore pressure can be used to estimate the wave‐induced liquefaction potential in a soil column. It also indicates that, in deep water, the second‐order solution predicts that a negative pore pressure at an antinode which may be greater than a positive pressure. Overall, the second‐order solution is found to agree better with the experimental results of the pore pressures available, compared to the linear solution. Copyright © 2000 John Wiley & Sons, Ltd. 相似文献
11.
To predict the macroscopic properties (e.g., transport, electromagnetic, and mechanical properties) of porous media, it is necessary to have a three‐dimensional (3D) representation of porous media. We reconstruct the geologically realistic 3D structure of Fontainebleau sandstone based on the two‐dimensional (2D) thin sections by using the multiple‐point statistics method. For this method, the size of template is an important parameter that reflects the perceived scale of spatial structure of porous media. In this paper, we take advantage of entropy method to obtain the appropriate size of the template, which is proven to be correct and feasible. The reconstruction method proposed by us combines successive 2D MPS simulations as well as 3D MPS simulation, which takes account into the pore structure information (e.g., heterogeneity and connectivity) both intralayer and interlayer. This reconstruction method is tested on Fontainebleau sandstone for which 3D images from micro‐CT scanning are available. Applying local percolation theory analysis, this new approach can depict the expected patterns of geological heterogeneities. In addition, it also can well reproduce a high degree of connectivity of the pore space better than other reconstruction methods based on lower‐order statistics. Copyright © 2011 John Wiley & Sons, Ltd. 相似文献
12.
Chemo‐thermo‐mechanically coupled seismic analysis of methane hydrate‐bearing sediments during a predicted Nankai Trough Earthquake 下载免费PDF全文
下载免费PDF全文 In the present study, we have developed a numerical method which can simulate the dynamic behaviour of a seabed ground during gas production from methane hydrate‐bearing sediments. The proposed method can describe the chemo‐thermo‐mechanical‐seismic coupled behaviours, such as phase changes from hydrates to water and gas, temperature changes and ground deformation related to the flow of pore fluids during earthquakes. In the first part of the present study, the governing equations for the proposed method and its discretization are presented. Then, numerical analyses are performed for hydrate‐bearing sediments in order to investigate the dynamic behaviour during gas production. The geological conditions and the material parameters are determined using the data of the seabed ground at Daini‐Atsumi knoll, Eastern Nankai Trough, Japan, where the first offshore production test of methane hydrates was conducted. A predicted earthquake at the site is used in the analyses. Regarding the seismic response to the earthquake which occur during gas production process, the wave profiles of horizontal acceleration and horizontal velocity were not extensively affected by the gas production. Hydrate dissociation behaviour is sensitive to changes in the pore pressure during earthquakes. Methane hydrate dissociation temporarily became active in some areas because of the main motion of the earthquake, then methane hydrate dissociation brought about an increase in the average pressure of the fluids during the earthquake. And, it was this increase in average pore pressure that finally caused the methane hydrate dissociation to cease during the earthquake. Copyright © 2016 John Wiley & Sons, Ltd. 相似文献
13.
14.
Extreme waves caused by tsunamis and storm surges can lead to soil failures in the near‐shore region, which may have severe impact on coastal environments and communities. Multiphase flows in deformable porous media involve several coupled processes and multiple time scales, which are challenging for numerical simulations. The objective of this study is to investigate the roles of the various processes and their interactions in multiphase flows in unsaturated soils under external wave loading, via theoretical time‐scale analysis and numerical simulations. A coupled geomechanics–multiphase flow model based on conservation laws is used. Theoretical analysis based on coupled and decoupled models demonstrates that transient and steady‐state responses are governed by pore pressure diffusion and saturation front propagation, respectively, and that the two processes are essentially decoupled. Numerical simulations suggest that the compressibility of the pore fluids and the deformation of the soil skeleton are important when the transient responses of the media are of concern, while the steady‐state responses are not sensitive to these factors. The responses obtained from the fully coupled numerical simulations are explained by a simplified time‐scale analysis based on coupled and decoupled models. Copyright © 2010 John Wiley & Sons, Ltd. 相似文献
15.
Fatiha Bouchelaghem 《Mathematical Geosciences》2011,43(1):55-73
This paper presents an analytical study of fluid flow in a porous medium presenting pores of two different length scales:
at the smallest or microscopic scale, the presence of connected voids confers a porous medium structure to the material investigated,
while at the upper or mesoscopic scale, macro-pores are present. This microstructure is employed to represent the progressive
opening of inter-aggregate pore spaces observed in natural compacted montmorillonites polluted by heavy metal ions. Three-dimensional
analytical expressions are rigorously derived for pore fluid velocity and excess pore fluid pressure within the porous matrix,
around an occluded ellipsoidal inter-aggregate void. The eccentricity ratio is employed to characterize the geometrical shape
of the ellipsoidal void, while its orientation with respect to the inflow in the far field is determined by the dip angle
θ. As an application, we investigate the flow focusing effect for varying eccentricity ratios and dip angles. 相似文献
16.
Fatiha Bouchelaghem 《Mathematical Geosciences》2011,43(1):23-53
This paper presents an analytical study of fluid flow in a porous medium presenting pores of two different length scales: at the smallest or microscopic scale, the presence of connected voids confers a porous medium structure to the material investigated, while at the upper or mesoscopic scale, macro-pores are present. This microstructure is employed to represent the progressive opening of inter-aggregate pore spaces observed in natural compacted montmorillonites polluted by heavy metal ions. Three-dimensional analytical expressions are rigorously derived for pore fluid velocity and excess pore fluid pressure within the porous matrix, around an occluded ellipsoidal inter-aggregate void. The eccentricity ratio is employed to characterize the geometrical shape of the ellipsoidal void, while its orientation with respect to the inflow in the far field is determined by the dip angle θ. As an application, we investigate the flow focusing effect for varying eccentricity ratios and dip angles. 相似文献
17.
This paper extends the material point method to analyze coupled dynamic, two‐phase boundary‐valued problems via a velocity formulation, in which solid and fluid phase velocities are the variables. Key components of the proposed approach are the adoption of Verruijt's sequence of update steps when integrating over time and the enhancement of volumetric strains. The connection between fractional step method and the time‐stepping algorithm presented in this paper is addressed. Enhancement of volumetric strains allows lower order variations in pressure and mitigates spurious pressure fields and locking that plague low‐order finite‐element implementations. A stress averaging technique to smoothen stress variations is proposed, and the local damping procedure adopted by FLAC is extended to handle two‐phase problems. Special Kelvin‐Voigt boundaries are developed to suppress reflections at artificial boundaries. Idealized examples are presented to demonstrate the capability of the proposed framework to accurately capture the physics of wave propagation, consolidation and wave attack on a sea dike. Copyright © 2012 John Wiley & Sons, Ltd. 相似文献
18.
Capturing the two‐way hydromechanical coupling effect on fluid‐driven fracture in a dual‐graph lattice beam model 下载免费PDF全文
下载免费PDF全文 Fluid‐driven fractures of brittle rock is simulated via a dual‐graph lattice model. The new discrete hydromechanical model incorporates a two‐way coupling mechanism between the discrete element model and the flow network. By adopting an operator‐split algorithm, the coupling model is able to replicate the transient poroelasticity coupling mechanism and the resultant Mandel‐Cryer hydromechanical coupling effect in a discrete mechanics framework. As crack propagation, coalescence and branching are all path‐dependent and irreversible processes, capturing this transient coupling effect is important for capturing the essence of the fluid‐driven fracture in simulations. Injection simulations indicate that the onset and propagation of fractures is highly sensitive to the ratio between the injection rate and the effective permeability. Furthermore, we show that in a permeable rock, the borehole breakdown pressure, the pressure at which fractures start to grow from the borehole, depends on both the given ratio between injection rate and permeability and the Biot coefficient. 相似文献
19.
A hierarchical mathematical model for analyses of coupled chemo‐thermo‐hygro‐mechanical behaviour in concretes at high temperature is presented. The concretes are modelled as unsaturated deforming reactive porous media filled with two immiscible pore fluids, i.e. the gas mixture and the liquid mixture, in immiscible–miscible levels. The thermo‐induced desalination process is particularly integrated into the model. The chemical effects of both the desalination and the dehydration processes on the material damage and the degradation of the material strength are taken into account. The mathematical model consists of a set of coupled, partial differential equations governing the mass balance of the dry air, the mass balance of the water species, the mass balance of the matrix components dissolved in the liquid phases, the enthalpy (energy) balance and momentum balance of the whole medium mixture. The governing equations, the state equations for the model and the constitutive laws used in the model are given. A mixed weak form for the finite element solution procedure is formulated for the numerical simulation of chemo‐thermo‐hygro‐mechanical behaviours. Special considerations are given to spatial discretization of hyperbolic equation with non‐self‐adjoint operator nature. Numerical results demonstrate the performance and the effectiveness of the proposed model and its numerical procedure in reproducing coupled chemo‐thermo‐hygro‐mechanical behaviour in concretes subjected to fire and thermal radiation. Copyright © 2005 John Wiley & Sons, Ltd. 相似文献
20.
Modelling of coupled fluid‐mechanical problems in fractured geological media using enriched finite elements 下载免费PDF全文
下载免费PDF全文 Jose Roberto Silvestre Euripedes do Amaral Vargas Jr. Luiz Eloy Vaz Antonio Claudio Soares 《国际地质力学数值与分析法杂志》2015,39(10):1104-1140
Geological environments, such as petroleum reservoirs, normally exhibit physical discontinuities, for example, fractures and faults. Because of the reduced thickness of these discontinuities, finite element formulations with strong discontinuity have been applied to the numerical modelling of geological environments. Until now, two relevant characteristics of petroleum reservoirs have not been addressed by these formulations. The first is the pore pressure jump in the direction normal to a discontinuity in a fluid‐mechanical coupling condition, which is present primarily in sealing faults owing to the contrast of permeability with the porous medium. The absence of this jump can affect the prediction of the deformability of a physical discontinuity. Furthermore, reservoir models frequently use coarse meshes. Thus, the method used to evaluate the pore pressure in the discontinuity may exhibit a strong dependence relative to the mesh refinement. Based on these characteristics, in this study, a formulation of an enriched finite element for application to coupled fluid‐mechanical problems with pre‐existing physical discontinuities saturated by a single fluid is presented. The formulation employs discontinuous interpolation functions and enables the reproduction of jumps of displacement and pore pressure associated with a discontinuity inside the element without the need to discretise it. An approximation to estimate the pore pressure in the discontinuity was developed, one which seeks to minimise the influence of refinement. The element's response is verified by comparison with a one‐dimensional analytical solution and simple examples that are simulated using commercial software. Copyright © 2015 John Wiley & Sons, Ltd. 相似文献