首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 250 毫秒
1.
The Early Miocene Tateyamazaki Dacite infills a 3.2 km diameter caldera. It comprises poorly sorted, massive, biotite-bearing dacite pumice lapilli tuff, in which huge blocks of densely welded dacite lapilli tuff, basaltic andesite lava, and other lithologies are commonly set. Dense blocks are variably cracked and intruded by the host lapilli tuff. Sparse blocks of bedded lapilli tuff and tuff are variably disaggregated to intermingle with the host rocks or are plastically deformed into irregular shapes. Rootless tuff veins millimeters to 30 cm thick are developed within the host rocks, mainly dipping at 10–30°, and are locally branched and mutually cut to form a network. Where thicker, they are stratified and locally carry accidental fragments. Accidental lapilli up to 2 or 3 cm wide and 30 cm long are locally set in near-vertical and variably sinuous arrays. Although poorly defined they are reminiscent of fluid escape structures. The host pumice lapilli tuff, however, retains in part a thermal remnant magnetization (TRM) vector stable at temperatures above 280 °C. Blocks in the caldera fill also retain TRM but the vectors are rotated significantly from those of the host pumice lapilli tuff and the adjacent volcanic rocks. Tateyamazaki Dacite is thus likely to have been emplaced at high temperatures, and intermingled with shattered basement rocks and ambient water to be partly liquefied within the caldera immediately after or during the caldera-forming eruption.  相似文献   

2.
The Glaramara tuff presents extensive exposures of the medial and distal deposits of a large tuff ring (original area >800 km2) that grew within an alluvial to lacustrine caldera basin. Detailed analysis and correlation of 21 sections through the tuff show that the eruption involved phreatomagmatic to magmatic explosions resulting from the interaction of dacitic magma and shallow-aquifer water. As the eruption developed to peak intensity, numerous, powerful single-surge pyroclastic density currents reached beyond 8 km from the vent, probably >12 km. The currents were strongly depletive and deposited coarse lapilli (>5 cm in diameter) up to 5 km from source, with only fine ash and accretionary lapilli deposited beyond this. As the eruption intensity waned, currents deposited fine ash and accretionary lapilli across both distal and medial regions. The simple wax–wane cycle of the eruption produced an overall upward coarsening to fining sequence of the vertical lithofacies succession together with a corresponding progradational to retrogradational succession of lithofacies relative to the vent. Various downcurrent facies transitions record transformations of the depositional flow-boundary zones as the depletive currents evolved with distance, in some cases transforming from granular fluid-based to fully dilute currents primarily as a result of loss of granular fluid by deposition. The tuff-ring deposits share several characteristics with (larger) ignimbrite sheets formed during Plinian eruptions and this underscores some overall similarities between pyroclastic density currents that form tuff rings and those that deposit large-volume ignimbrites. Tuff-ring explosive activity with such a wide area of impact is not commonly recognized, but it records the possibility of such currents and this should be factored into hazard assessments.  相似文献   

3.
J. Stiefenhofer  D.J. Farrow   《Lithos》2004,76(1-4):139-160
The Mwadui pipe represents the largest diamondiferous kimberlite ever mined and is an almost perfectly preserved example of a kimberlitic crater in-fill, albeit without the tuff ring.

The geology of Mwadui can be subdivided into five geological units, viz. the primary pyroclastic kimberlite (PK), re-sedimented volcaniclastic kimberlite deposits (RVK), granite breccias (subdivided into two units), the turbidite deposits, and the yellow shales listed in approximate order of formation. The PK can be further subdivided into two units—lithic-rich ash and lapilli tuffs which dominate the succession, and lithic-poor juvenile-rich ash and lapilli tuffs. The lower crater is well bedded down to at least 684 m from present surface (extent of current drill data). The bedding is defined by the presence of juvenile-rich lapilli tuffs vs. lithic-rich lapilli tuffs, and the systematic variation in granite content and clast size within much of the lithic-rich lapilli tuffs. Four distinct types of bedding have been identified in the pyroclastic deposits. Diffuse zones characterised by increased granite abundance and size, and upward-fining units, represent the dominant types throughout the deposit.

Lateral heterogeneity was observed, in addition to the vertical changes, suggesting that the eruption was quite heterogeneous, or that more than one vent may have been present. The continuous nature of the bedding in the pyroclastic material and the lack of ash-partings suggest deposition from a high concentration (ejecta), sustained eruption column at times, e.g. the massive, very diffusely stratified deposits. The paucity of tractional bed forms suggest near vertical particle trajectories, i.e. a clear air-fall component, but the poorly sorted, matrix-supported nature of the deposits suggest that pyroclastic flow and/or surge processes may also have been active during the eruption.

Available diamond sampling data were examined and correlated with the geology. Data derive from the old 120 (37 m), 200 (61 m), 300 (92 m) and 1200 ft (366 m) levels, pits sunk during historical mining operations, drill logs, as well as more recent bench mapping. Correlating macro-diamond sample data and geology shows a clear relationship between diamond grade and lithology. Localised enrichment and dilution of the primary diamond grade has taken place in the upper reworked volcaniclastic deposits due to post-eruptive sedimentary in-fill processes. Clear distinction can be drawn between upper (re-sedimented) and lower (pyroclastic) crater deposits at Mwadui, both from a geological and diamond grade perspective.

Finally, an emplacement model for the Mwadui kimberlite is proposed. Geological evidence suggests that little or no sedimentary cover existed at the time of emplacement. The nature of the bedding within the pyroclastic deposits and the continuity of the bedding in the vertical dimension suggest that the eruption was continuous, but that the eruption column may have been heterogeneous, both petrologically as well as geometrically. Volcanic activity appears to have ceased thereafter and the crater was gradually filled with granite debris from the unstable crater walls and re-sedimented volcaniclastic material derived from the tuff ring.

The Mwadui kimberlite exhibits marked similarities compared to the Orapa kimberlite in Botswana.  相似文献   


4.
The Ilchulbong tuff cone, Cheju Island, South Korea   总被引：3，自引：0，他引：3  
The Ilchulbong mount of Cheju Island, South Korea, is an emergent tuff cone of middle Pleistocene age formed by eruption of a vesiculating basaltic magma into shallow seawater. A sedimentological study reveals that the cone sequence can be represented by nine sedimentary facies that are grouped into four facies associations. Facies association I represents steep strata near the crater rim composed mostly of crudely and evenly bedded lapilli tuff and minor inversely graded lapilli tuff. These facies suggest fall-out from tephra finger jets and occasional grain flows, respectively. Facies association II represents flank or base-of-slope deposits composed of lenticular and hummocky beds of massive or backset-stacked deposits intercalated between crudely to thinly stratified lapilli tuffs. They suggest occasional resedimentation of tephra by debris flows and slides during the eruption. Facies association III comprises thin, gently dipping marginal strata, composed of thinly stratified lapilli tuff and tuff. This association results from pyroclastic surges and cosurge falls associated with occasional large-scale jets. Facies association IV comprises a reworked sequence of massive, inversely graded and cross-bedded (gravelly) sandstones. These facies represent post-eruptive reworking of tephra by debris and stream flows. The facies associations suggest that the Ilchulbong tuff cone grew by an alternation of vertical and lateral accumulation. The vertical buildup was accomplished by plastering of wet tephra finger jets. This resulted in oversteepening and periodic failure of the deposits, in which resedimentation contributed to the lateral growth. After the eruption ceased, the cone underwent subaerial erosion and faulting of intracrater deposits. A volcaniclastic apron accumulated with erosion of the original tuff cone; the faulting was caused by subsidence of the subvolcanic basement within the crater.  相似文献   

5.
The Songaksan mount in the southwestern part of Cheju Island, Korea, is a Taalian tuff ring produced by phreatomagmatic explosions at an aquifer. A detailed analysis of proximal-to-distal facies changes reveals that the tuff ring sequence can be represented by 21 sedimentary facies; one lateral facies sequence (LFS) and three vertical facies sequences (VFS). The VFS 1 and 2 are representative of facies relationships in horizontal near-vent deposits. The VFS 1 comprises scour-fill bedded tuff, inversely graded tuff, massive tuff and laminated tuff from base to top. The VFS 2 is a variant of the VFS 1, replaced by an inversely graded lapilli tuff unit at the base. The sequences suggest traction carpet, suspension and minor traction sedimentation from a high-concentration near-vent base surge. The LFS 1 and the VFS 3 are distilled from outward-dipping flank deposits. Both sequences begin with disorganized lapilli tuff, followed successively by stratified (lapilli) tuff, dune-bedded (lapilli) tuff, very thinbedded tuff and accretionary lapilli. They are suggestive of waning base surge which decreases in particle concentration, suspended-load fall-out rate and flow regimes with an increase in traction and sorting. These facies sequences suggest that a base surge experiences flow transformation with its flow characters changing with time and space. A near-vent base surge is turbulent, uniformly mixed and highly concentrated and produces scour-fill bedded tuff. As capacity decreases, the surge transforms into a dense and laminar underflow and a dilute and turbulent upper part (gravity transformation), depositing inversely graded, massive and normally graded (lapilli) tuff. Ensuing loss of sediment load and mixing of ambient air result in flow dilution (surface transformation). Stratified and dune-bedded units are produced by tractional processes of turbulent and low-concentration surge. Further dilution causes deceleration and cooling and results in precipitation of moistened ash and accretionary lapilli from suspension.  相似文献   

6.
A detailed 90,000-year tephrostratigraphic framework of Aso Volcano, southwestern Japan, has been constructed to understand the post-caldera eruptive history of the volcano. Post-caldera central cones were initiated soon after the last caldera-forming pyroclastic-flow eruption (90 ka), and have produced voluminous tephra and lava flows. The tephrostratigraphic sequence preserved above the caldera-forming stage deposits reaches a total thickness of 100 m near the eastern caldera rim. The sequence is composed mainly of mafic scoria-fall and ash-fall deposits but 36 silicic pumice-fall deposits are very useful key beds for correlation of the stratigraphic sequence. Explosive, silicic pumice-fall deposits that fell far beyond the caldera have occurred at intervals of about 2500 years in the post-caldera activity. Three pumice-fall deposits could be correlated with lava flows or an edifice in the western part of the central cones, although the other silicic tephra beds were erupted at unknown vents, which are probably buried by the younger products from the present central cones. Most of silicic eruptions produced deposits smaller than 0.1 km3, but bulk volumes of two silicic eruptions producing the Nojiri pumice (84 ka) and Kusasenrigahama pumice (Kpfa; 30 ka) were on the order of 1 km3 (VEI 5). The largest pyroclastic eruption occurred at the Kusasenrigahama crater about 30 ka. This catastrophic eruption began with a dacitic lava flow and thereafter produced Kpfa (2.2 km3). Total tephra volume in the past 90,000 years is estimated at about 18.1 km3 (dense rock equivalent: DRE), whereas total volume for edifices of the post-caldera central cones is calculated at about 112 km3, which is six times greater than the former. Therefore, the average magma discharge rate during the post-caldera stage of Aso Volcano is estimated at about 1.5 km3/ky, which is similar to the rates of other Quaternary volcanoes in Japan.  相似文献   

7.
The Cretaceous Kusandong Tuff, Korea, is a thin (1–5 m thick) but laterally extensive (~ 200 km) silicic ignimbrite emplaced in a fluviolacustrine basin adjacent to a continental volcanic arc. The tuff has been used as an excellent key bed because of its great lateral continuity and unique lithology, characterized by the virtual absence of juvenile clasts and an abundance of quartz and feldspar crystals (up to 55–73 vol.%). The tuff is mostly massive and ungraded and locally shows crude internal layering, basal inverse grading and near-top normal grading of crystals, either erosional or non-erosional lower surfaces, and flat-lying to imbricated grain fabrics. Fragile intraformational clasts of mudstone and tuff are also included. These features provide only ambiguous information on the properties of the responsible pyroclastic density currents: i.e. whether they were dense and laminar or dilute and turbulent. The overall lateral continuity and sheet-like geometry of the tuff suggests, however, that the transport system of the currents was highly expanded, dilute, and turbulent. A plug-flow or slab-flow model cannot explain the origin of crude internal layering, imbricated grain fabrics, and the high crystal content, which is most likely the result of vigorous sorting processes within a dilute and turbulent current. Features indicative of deposition from a dense and laminar transporting medium are locally present, suggesting that a dense and laminar depositional system could develop locally at the base of the dilute and turbulent transport system. The virtual absence of juvenile clasts in the tuff is interpreted to be due to rapid ascent, sudden decompression, and full fragmentation of silicic magma into fine glass shards and crystals. Scarcity of basement-derived accidental components together with the absence of pumiceous fallout deposits beneath the tuff is interpreted to be due to shallow-level fragmentation of magma followed by immediate generation of pyroclastic density currents from shallow-level blasts at the onset of eruption. The eruption occurred through multiple vent sites in a short period of time, producing a seemingly single but actually composite ignimbrite unit. Such an eruption was probably possible because of a regional tectonic event within the basin or in its vicinity. It is proposed that a composite ignimbrite with the characteristics of the Kusandong Tuff can be an exemplary product of syntectonic volcanism that can provide an insight into the interpretation of structural and stratigraphic evolution of a sedimentary basin.  相似文献   

8.
Depositional processes of the Suwolbong tuff ring, Cheju Island (Korea)   总被引：11，自引：0，他引：11  
The Suwolbong pyroclastic sequence in the western part of Cheju Island, Korea, comprises partly preserved rim beds of a Quaternary basaltic tuff ring whose vent lies about 1 km seaward of the present shoreline. The sequence consists of breccia, lapillistone, lapilli tuff and tuff. Eighteen sedimentary facies are established and organized into six lateral facies sequences (LFS) and seven vertical facies sequences (VFS). The LFS 1, 4 and 5 begin with massive lapilli tuff which transforms downcurrent into either planar-bedded (LFS 1), undulatory-bedded (LFS 4) or climbing dune-bedded (LFS 5) (lapilli) tuff units. They are representative of relatively ‘dry’ base surge whose particle concentration decreases downcurrent with a progressive increase in both tractional processes and sorting. The LFS 2 begins with disorganized and massive lapilli tuff and transforms into crudely stratified units downcurrent. It results from relatively ‘wet’ base surge in which sorting is poor due to the cohesion of damp ash. The LFS 3 comprises well-sorted lapilli tuff and stratified tuff further downcurrent, suggestive of deposition from combined fall and surge of relatively ‘dry’ hydroclastic eruption. All seven vertical facies sequences generally comprise two facies units of coarse-grained fines-depleted lapilli tuff and an overlying fine-grained tuff. These sequences are suggestive of deposition from base surge that consists of a turbulent head and a low-concentration tail. Depositional processes in the Suwolbong tuff ring were dominated by a relatively ‘dry’ base surge. The base surge comprises turbulent and high-concentration suspension near the vent whose deposits are generally unstratified due to the lack of tractional transport. As the base surge becomes diluted downcurrent through fallout of clasts and mixing of ambient air, it develops large-scale turbulent eddies and is segregated into coarse-grained bedload and overlying fine-grained suspension forming thinly stratified units. Further downcurrent, the base surge may be either cooled and deflated or pushed up into the air, depending on its temperature. The Suwolbong tuff ring comprises an overall wet-to-dry cycle with several dry-to-wet cycles in it, suggestive of overall decrease in abundance of external water and fluctuation in the rate of magma rise.  相似文献   

9.
Sedimentation and welding processes of the high temperature dilute pyroclastic density currents and fallout erupted at 7.3 ka from the Kikai caldera are discussed based on the stratigraphy, texture, lithofacies characteristics, and components of the resulting deposits. The welded eruptive deposits, Unit B, were produced during the column collapse phase, following a large plinian eruption and preceding an ignimbrite eruption, and can be divided into two subunits, Units Bl and Bu. Unit Bl is primarily deposited in topographic depressions on proximal islands, and consists of multiple thin (< 1 m) flow units with stratified and cross-stratified facies with various degrees of welding. Each thin unit appears as a single aggradational unit, composed of a lower lithic-rich layer or pod and an upper welded pumice-rich layer. Lithic-rich parts are fines-depleted and are composed of altered country rock, fresh andesite lava, obsidian clasts with chilled margins, and boulders. The overlying Unit Bu shows densely welded stratified facies, composed of alternating lithic-rich and pumice-rich layers. The layers mantle lower units and are sometimes viscously deformed by ballistics. The sedimentary characteristics of Unit Bl such as welded stratified or cross-stratified facies indicate that high temperature dilute pyroclastic density currents were repeatedly generated from limited magma-water interactions. It is thought that dense brittle particles were segregated in a turbulent current and were immediately buried by deposition of hot, lighter pumice-rich particles, and that this process repeated many times. It is also suggested that the depositional temperature of eruptive materials was high and the eruptive style changed from a normal plinian eruption, through surge-generating explosions (Unit Bl), into an agglutinate-dominated fallout eruption (Unit Bu). On the basis of field data, welded pyroclastic surge deposits could be produced only under specific conditions, such as (1) rapid accumulation of pyroclastic particles sufficiently hot to weld instantaneously upon deposition, and (2) elastic particles' interactions with substrate deformation. These physical conditions may be achieved within high temperature and highly energetic pyroclastic density currents produced by large-scale explosive eruptions.  相似文献   

10.
Rhyolite eruptions in Iceland mostly take place at long-lived central volcanoes, examples of which are found associated with each of the present-day rift-zone ice caps. Subglacial eruptions at Kerlingarfjöll central volcano produced rhyolite tuyas that are notable for their exposures of early-erupted pyroclastic material. Observations from a number of these edifices are synthesised into a general model for explosive rhyolite tuya formation. Eruptions begin with violent phreatomagmatic explosions that generate massive tuff (mT), but the influence of water quickly declines, leading to the formation of massive lapilli-tuffs (mLT) containing magmatically-fragmented vesicular pumice and ash. These are deposited rapidly near the vent, probably by moist pyroclastic density currents, confined by ice but not within a meltwater lake. The explosive-effusive transition is controlled by the ascent rate and gas content of the magma. An unusual obsidian-rich massive lapilli-tuff lithofacies (omLT) is identified and interpreted as pyroclastic material that was intruded into gas-fluidised deposits at the explosive-effusive transition. The effusive phase of eruption involves the emplacement of intrusions and lava caps. Intrusions of lava into the early-erupted phreatomagmatic deposits are characterised by peperitic margins and the formation of hyaloclastite. Intrusions into stratigraphically higher levels of the pyroclastic material show more limited interaction with the host tephra and have microcrystalline cores. Large lava bodies with columnar-jointed margins cap the tuyas and have intrusive basal contacts with the tephras. The main influence of the ice is to confine the rhyolite eruptive products to immediately above the vent region. This is in contrast to subglacial basaltic tuya-forming eruptions, which are characterised by the formation of meltwater lakes, phreatomagmatic fragmentation and subaqueous deposition. The lack of meltwater storage may reduce the potential for large jökulhlaups.  相似文献   

11.
The pipe shapes, infill and emplacement processes of the Attawapiskat kimberlites, including Victor, contrast with most of the southern African kimberlite pipes. The Attawapiskat kimberlite pipes are formed by an overall two-stage process of (1) pipe excavation without the development of a diatreme (sensu stricto) and (2) subsequent pipe infilling. The Victor kimberlite comprises two adjacent but separate pipes, Victor South and Victor North. The pipes are infilled with two contrasting textural types of kimberlite: pyroclastic and hypabyssal-like kimberlite. Victor South and much of Victor North are composed of pyroclastic spinel carbonate kimberlites, the main features of which are similar: clast-supported, discrete macrocrystal and phenocrystal olivine grains, pyroclastic juvenile lapilli, mantle-derived xenocrysts and minor country rock xenoliths are set in serpentine and carbonate matrices. These partly bedded, juvenile lapilli-bearing olivine tuffs appear to have been formed by subaerial fire-fountaining airfall processes.

The Victor South pipe has a simple bowl-like shape that flares from just below the basal sandstone of the sediments that overlie the basement. The sandstone is a known aquifer, suggesting that the crater excavation process was possibly phreatomagmatic. In contrast, the pipe shape and internal geology of Victor North are more complex. The northwestern part of the pipe is dominated by dark competent rocks, which resemble fresh hypabyssal kimberlite, but have unusual textures and are closely associated with pyroclastic juvenile lapilli tuffs and country rock breccias±volcaniclastic kimberlite. Current evidence suggests that the hypabyssal-like kimberlite is, in fact, not intrusive and that the northwestern part of Victor North represents an early-formed crater infilled with contrasting extrusive kimberlites and associated breccias. The remaining, main part of Victor North consists of two macroscopically similar, but petrographically distinct, pyroclastic kimberlites that have contrasting macrodiamond sample grades. The juvenile lapilli of each pyroclastic kimberlite can be distinguished only microscopically. The nature and relative modal proportion of primary olivine phenocrysts in the juvenile lapilli are different, indicating that they derive from different magma pulses, or phases of kimberlite, and thus represent separate eruptions. The initial excavation of a crater cross-cutting the earlier northwestern crater was followed by emplacement of phase (i), a low-grade olivine phenocryst-rich pyroclastic kimberlite, and the subsequent eruption of phase (ii), a high-grade olivine phenocryst-poor pyroclastic kimberlite, as two separate vents nested within the original phase (i) crater. The second eruption was accompanied by the formation of an intermediate mixed zone with moderate grade. Thus, the final pyroclastic pipe infill of the main part of the Victor North pipe appears to consist of at least three geological/macrodiamond grade zones.

In conclusion, the Victor kimberlite was formed by several eruptive events resulting in adjacent and cross-cutting craters that were infilled with either pyroclastic kimberlite or hypabyssal-like kimberlite, which is now interpreted to be of probable extrusive origin. Within the pyroclastic kimberlites of Victor North, there are two nested vents, a feature seldom documented in kimberlites elsewhere. This study highlights the meaningful role of kimberlite petrography in the evaluation of diamond deposits and provides further insight into kimberlite emplacement and volcanism.  相似文献   


12.
The 20–16 ka Monte Guardia sequence of Lipari island, southern Italy, is a complex succession of silicic pyroclastic surge deposits produced, in part, by hydromagmatic explosions near sea level. Most surges were directed to the east, north-east and north of the vent, and climbed the 12° southern slopes of Monte Sant’Angelo in the central part of the island. A series of thin, distinctive key bed-sets containing oxidized ash and accretionary lapilli allow a detailed correlation of sections and the lateral tracing of deposits of single pyroclastic surges across the island. Facies analysis reveals that the proximal-to-distal facies changes are different from those suggested by a previous study based on a statistical approach to lateral facies distribution. Single dry surge deposits evolve downcurrent from (1) beds of disorganized medium- to coarse-grained lapilli containing scattered blocks, to (2) bipartite disorganized/stratified beds of fine- to coarse-grained lapilli with ash matrix, to (3) dunes formed of coarse-grained ash to medium-grained lapilli, to (4) planar beds of fine-grained lapilli. This facies sequence is similar to published models for some Korean surge deposits, and records decelerating surges which experienced a downflow decrease in turbulence, particle concentration and suspended-load fall-out rate, and an increase in traction processes. As the Monte Guardia surges climbed the opposing slopes of Monte Sant'Angelo, they bifurcated into eastern and western tongues, which experienced rapid deceleration leading to a rapid downcurrent thinning and fining of the surge deposits. Two fluid-dynamical approaches suggest that Monte Guardia surges travelled at speeds of more than 75–85 m s -1 before climbing Monte Sant’Angelo. Flows with this vigour and distribution are capable of destroying animal and plant populations on Lipari.  相似文献   

13.
The Bandas del Sur Formation preserves a Quaternary extra-calderarecord of central phonolitic explosive volcanism of the LasCañadas volcano at Tenerife. Volcanic rocks are bimodalin composition, being predominantly phonolitic pyroclastic deposits,several eruptions of which resulted in summit caldera collapse,alkali basaltic lavas erupted from many fissures around theflanks. For the pyroclastic deposits, there is a broad rangeof pumice glass compositions from phonotephrite to phonolite.The phonolite pyroclastic deposits are also characterized bya diverse, 7–8-phase phenocryst assemblage (alkali feldspar+ biotite + sodian diopside + titanomagnetite + ilmenite + nosean–haüyne+ titanite + apatite) with alkali feldspar dominant, in contrastto interbedded phonolite lavas that typically have lower phenocrystcontents and lack hydrous phases. Petrological and geochemicaldata are consistent with fractional crystallization (involvingthe observed phenocryst assemblages) as the dominant processin the development of phonolite magmas. New stratigraphicallyconstrained data indicate that petrological and geochemicaldifferences exist between pyroclastic deposits of the last twoexplosive cycles of phonolitic volcanism. Cycle 2 (0·85–0·57Ma) pyroclastic fall deposits commonly show a cryptic compositionalzonation indicating that several eruptions tapped chemically,and probably thermally stratified magma systems. Evidence formagma mixing is most widespread in the pyroclastic depositsof Cycle 3 (0·37–0·17 Ma), which includesthe presence of reversely and normally zoned phenocrysts, quenchedmafic glass blebs in pumice, banded pumice, and bimodal to polymodalphenocryst compositional populations. Syn-eruptive mixing eventsinvolved mostly phonolite and tephriphonolite magmas, whereasa pre-eruptive mixing event involving basaltic magma is recordedin several banded pumice-bearing ignimbrites of Cycle 3. Theperiodic addition and mixing of basaltic magma ultimately mayhave triggered several eruptions. Recharge and underplatingby basaltic magma is interpreted to have elevated sulphur contents(occurring as an exsolved gas phase) in the capping phonoliticmagma reservoir. This promoted nosean–haüyne crystallizationover nepheline, elevated SO3 contents in apatite, and possiblyresulted in large, climatologically important SO2 emissions. KEY WORDS: Tenerife; phonolite; crystal fractionation; magma mixing; sulphur-rich explosive eruptions  相似文献   

14.
Pyroclastic flow is defined as the flow of high-temperature, essential, fragmental materials. This is synonymous with the nuée ardente in the broad sense. Three modes of emplacement of high-temperature, essential, solid (or liquid) materials after the ejection from the crater may be recognized: 1) Projection of fragments from the crater by explosive expansion of gas within the crater; 2) descent of fragments or liquid magma from the crater caused only by the action of gravity; and 3) swift downflow of the mixture of gas and fragments. This last is intermediate between the first two and corresponds to pyroclastic flow.

A new classification of pyroclastic flows is proposed based upon viscosity of the materials, which ls inferred from the nature of the deposit. The volume of the deposit increases as the viscosity decreases.

1) Nuée ardente in the strict sense: Represented by the nuée ardente of Mt. Pelée, Merapi, etc. The fragments are less porous, which indicates the high viscosity. The volume of the deposit is small, generally less than 0.01 km3.

2) Pyroclastic flow of the intermediate type: Represented by certain pyroclastic flows of Asama, Hakone, and Myoko volcanoes. Both viscosity and volume (0.1 - 1 km3) are intermediate between 1) and 3).

3) Pumice flow: Represented by pumice and tuff flows of all sizes, such as those of Crater Lake, Hakone, Katmai, and Aso volcanoes. Low viscosity leads -to full vesiculation into pumice. Many of them are larger in volume ( > 10 km3) than 1) and 2), and calderas of the Krakatau type are often formed after the eruption of larger pumice flows.--Auth. English summ.  相似文献   

15.
A Classic Period agricultural village in El Salvador was partially destroyed and encased in pyroclastic debris during the eruption of Loma Caldera about A.D. 590. The eruption was phreatomagmatic in nature, depositing alternating units of “muddy” pyroclastic surge beds and units of air fall lapilli, pumice, and volcanic bombs. This ephemeral eruptive left only a partially eroded collapsed tephra ring. The eruption began with earth tremors and possible steam explosions, giving enough warning to allow the inhabitants of the nearby village to flee, but violent enough that they left behind many of their most valuable personal items. The low temperature of wet ash surge units, which were likely emplaced as “ash hurricanes,” preserved much of the vegetation and other botanical remains surrounding the village. Analysis of the maturity of maize preserved in agricultural fields, and the presence or absence of blossoming and fruiting plants indicates that the eruption occurred in the mid-rainy season, probably late August or September. The placement of artifacts within buildings indicate that the eruption occurred in the early evening, after the inhabitants had returned from their agricultural fields and eaten an evening meal, but before retiring for the night. Although the exact year of the eruption can only be estimated within the uncertainty of radiocarbon dating, the season of the year and the time of day can be identified with unusual precision. © 1996 John Wiley & Sons, Inc.  相似文献   

16.
his study presents the first and detail field investigations of exposed deposits at proximal sections of the Barombi Mbo Maar (BMM), NE Mt Cameroon, with the aim of documenting its past activity, providing insight on the stratigraphic distribution, depositional process, and evolution of the eruptive sequences during its formation. Field evidence reveals that the BMM deposit is about 126m thick, of which about 20m is buried lowermost under the lake level and covered by vegetation. Based on variation in pyroclastic facies within the deposit, it can be divided into three main stratigraphic units: U1, U2 and U3. Interpretation of these features indicates that U1 consists of alternating lapilli-ash-lapilli beds series, in which fallout derived individual lapilli-rich beds are demarcated by surges deposits made up of thin, fine-grained and consolidated ash-beds that are well-defined, well-sorted and laterally continuous in outcrop scale. U2, a pyroclastic fall-derived unit, shows crudely lenticular stratified scoriaceous layers, in which many fluidal and spindle bombs-rich lapilli-beds are separated by very thin, coarse-vesiculatedash-beds, overlain by a mantle xenolith- and accidental lithic-rich explosive breccia, and massive lapilli tuff and lapillistone. U3 displays a series of surges and pyroclastic fall layers. Emplacement processes were largely controlled by fallout deposition and turbulent diluted pyroclastic density currents under “dry” and “wet” conditions. The eruptive activity evolved in a series of initial phreatic eruptions, which gradually became phreatomagmatic, followed by a phreato-Strombolian and a violent phreatomagmatic fragmentation. A relatively long-time break, demonstrated by a paleosol between U2 and U3, would have permitted the feeding of the root zone or the prominent crater by the water that sustained the next eruptive episode, dominated by subsequent phreatomagmatic eruptions. These preliminary results require complementary studies, such as geochemistry, for a better understanding of the changes in the eruptive styles, and to develop more constraints on the maar’s polygenetic origin.  相似文献   

17.
 The Kos Plateau Tuff (KPT) erupted during a moderate-volume explosive rhyolitic event approximately 161 ka from a source south of Kos in the eastern Aegean sea. Six major stratigraphic units have been identified, from A at the base, to F, uppermost. Unit A is a widespread vitric ash fall layer that is thickest (1.5 m), and most extensive, southeast of the source. Unit B is a 1- to 2-m-thick, low-angle cross-stratified armoured pumice lapilli and ash layer found on Kos. Unit C resembles unit B but includes a greater abundance of lithic lapilli, less fine ash, is only diffusely stratified and is on Kos and west of the source. Unit D includes a sequence of three non-welded, 1- to 20-m-thick ignimbrites that extend radially >38 km from the source in areas of low topography. Unit E is a sequence of two non-welded, 3- to 8-m-thick ignimbrites which occur radially from the vent regardless of topography, >64 km from source. Unit F has a 6-m-thick, basal, low-angle cross-stratified armoured pumice lapilli and ash part probably deposited radially from source. The upper part of unit F is a widespread >1-m-thick vitric ash fall layer, found to at least 50 km from the source. These six units represent a change in eruptive conditions from initial and final phreatomagmatic activity depositing fallout and internally stratified pyroclastic density current deposits to "dry" explosive during the more intense phases of the eruption which generated ignimbrites. Received: 8 June 1998 / Accepted: 14 January 1999  相似文献   

18.
Archean felsic volcanic rocks form a 2000 m thick succession stratigraphically below the Helen Iron Formation in the vicinity of the Helen Mine, Wawa, Ontario. Based on relict textures and structures, lateral and vertical facies changes, and fragment type, size and distribution, the felsic volcanic rocks have been subdivided into (a) lava flows and domes (b) hyalotuffs, (c) bedded pyroclastic flows, (d) massive pyroclastic flows, and (e) block and ash flows.Lava flows and domes are flow-banded, massive, and/or brecciated and occur throughout the stratigraphic succession. Dome/flow complexes are believed to mark the end of explosive eruptive cycles. Deposits interpreted as hyalotuffs are finely bedded and composed dominantly of ash-size material and accretionary lapilli. These deposits are interlayered with bedded pyroclastic flow deposits and probably formed from phreatomagmatic eruptions in a shallow subaqueous environment. Such eruptions led to the formation of tuff cones or rings. If these structures emerged they may have restricted the access of seawater to the eruptive vent(s), thus causing a change in eruptive style from short, explosive pulses to the establishment of an eruption column. Collapse of this column would lead to the accumulation of pyroclastic material within and on the flanks of the cone/ring structure, and to flows which move down the structure and into the sea. Bedded pyroclastic deposits in the Wawa area are thought to have formed in this manner, and are now composed of a thicker, more massive basal unit which is overlain by one or more finely bedded ash units. Based on bed thickness, fragment and crystal size, type and abundance, these deposits are further subdivided into central, proximal and distal facies.Central facies units consist of poorly graded, thick (30–80 m) basal beds composed of 23–60% lithic and 1–8% juvenile fragments. These are overlain by 1–4 thinner ash beds (2–25 cm). Proximal facies basal beds range from 2–35 m in thickness and are composed of 15–35% lithic and 4–16% juvenile fragments. Typically, lithic components are normally graded, whereas juvenile fragments are inversely graded. These basal beds are overlain by ash beds (2–14 in number) which range from 12 cm to 6 m in thickness. Distal basal beds, where present, are thin (1–2 m), and composed of 2–8% lithic and 6–21% juvenile fragments. Overlying ash beds range up to 40 in number.The climax of pyroclastic activity is represented by a thick (1000 m) sequence of massive, poorly sorted, pyroclastic flow deposits which are composed of 5–15% lithic fragments and abundant pumice. These deposits are similar to subaerial ash flows and appear to mark the rapid eruption of large volumes of material. They are overlain by felsic lavas and/or domes. Periodic collapse of the growing domes produced abundant coarse volcanic breccia. The overall volcanic environment is suggestive of caldera formation and late stage dome extrusion.  相似文献   

19.
Subaqueous tuff deposits within the lower Miocene Lospe Formation of the Santa Maria Basin, California, are up to 20 m thick and were deposited by high density turbidity flows after large volumes of ash were supplied to the basin and remobilized. Tuff units in the Lospe Formation include a lower lithofacies assemblage of planar bedded tuff that grades upward into massive tuff, which in turn is overlain by an upper lithofacies assemblage of alternating thin bedded, coarse grained tuff beds and tuffaceous mudstone. The planar bedded tuff ranges from 0.3 to 3 m thick and contains 1-8 cm thick beds that exhibit inverse grading, and low angle and planar laminations. The overlying massive tuff ranges from 1 to 10 m thick and includes large intraclasts of pumiceous tuff and stringers of pumice grains aligned parallel to bedding. The upper lithofacies assemblage of thin bedded tuff ranges from 0.4 to 3 m thick; individual beds are 6-30 cm thick and display planar laminae and dewatering structures. Pumice is generally concentrated in the upper halves of beds in the thin bedded tuff interval. The association of sedimentary structures combined with semi-quantitative analysis for dispersive and hydraulic equivalence of bubble-wall vitric shards and pumice grains reveals that particles in the planar bedded lithofacies are in dispersive, not settling, equivalence. This suggests deposition under dispersive pressures in a tractive flow. Grains in the overlying massive tuff are more closely in settling equivalence as opposed to dispersive equivalence, which suggests rapid deposition from a suspended sediment load. The set of lithofacies that comprises the lower lithofacies assemblage of each of the Lospe Formation tuff units is analogous to those of traction carpets and subsequent suspension sedimentation deposits often attributed to high density turbidity flows. Grain distributions in the upper thin bedded lithofacies do not reveal a clear relation for dispersive or settling equivalence. This information, together with the association of sedimentary features in the thin bedded lithofacies, including dewatering structures, suggests a combination of tractive and liquefied flows. Absence of evidence for elevated emplacement temperatures (e.g. eutaxitic texture or shattered crystàls) suggests emplacement of the Lospe Formation tuff deposits in a cold state closely following pyroclastic eruptions. The tuff deposits are not only a result of primary volcanic processes which supplied the detritus, but also of processes which involved remobilization of unconsolidated ash as subaqueous sediment gravity flows. These deposits provide an opportunity to study the sedimentation processes that may occur during subaqueous volcaniclastic flows and demonstrate similarities with existing models for sediment gravity flow processes.  相似文献   

20.
A 500‐m‐long road cutting in the Lower Devonian Snowy River Volcanics (SRV), eastern Victoria, Australia, exposes phreatomagmatic units and volcaniclastic sediments. Based on bed geometry, sorting and sedimentary structures, it was possible to distinguish base‐surge deposits from ephemeral fluvial deposits in this relatively well‐exposed ancient succession. Where the base‐surge deposits infill irregular topography, bed sets mantle the pre‐existing surface but thicken into topographic lows. In contrast, where the fluvial deposits infill topographic depressions, beds onlap laterally against channel walls. In addition, curvi‐planar slide surfaces within the base‐surge deposits generated by inter‐eruptive slumping indicate rapid emplacement as a constructional tuff rampart (? maar). The base‐surge deposits are always poorly sorted and commonly contain accretionary lapilli, reflecting their deposition from turbulent, low‐particle‐concentration, steam‐rich pyroclastic currents. In contrast, the fluvial deposits are relatively well‐sorted, reflecting hydraulic sorting and winnowing during tractional transport and deposition. There are significant differences in the types of sedimentary structures present. (1) Bedding in the base‐surge deposits is entirely tabular, and beds can be traced laterally to the limits of the outcrop. In contrast, the fluvial deposits have abundant internal scour surfaces that result in beds/bedding intervals lensing out laterally over intervals of the order of 5–10 m. (2) Cross‐beds with relatively high‐angle foresets are restricted to the fluvial deposits. (3) Laterally persistent tabular beds that contain abundant, densely packed accretionary lapilli are restricted to the base‐surge deposits. In summary, although base‐surge deposits and ephemeral fluvial deposits can appear superficially similar, it is possible to apply facies models carefully to distinguish between them, even in ancient successions.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号