首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 15 毫秒
1.
Using simulated data, it is demonstrated that one may estimate the body wave velocity in the crust by measuring the angle of incidence ofP-waves provided only the very first part of the signal is used. This angle has been measured for a set ofP-waves at the NORSAR long period instrument sites. Combining these observations with measurements of apparent velocities, we find that the data indicates a crust velocity of 6.1±0.4 km/sec. While it is somewhat uncertain to what depth the value is representative, the observations are in obvious disagreement with previous authors who concluded that long periodP-waves were not affected by the earth's crust. Because of difficulties in separating the effects of real velocity variations from measurement errors, the details of the observedP-wave variation across the array are difficult to interpret. The consistent behavior of the data does, however, indicate that variations of approximately 3% must exist in the crustalP-wave velocity across the array.  相似文献   

2.
A layeredP- andS-wave velocity model is obtained for the Friuli seismic area using the arrival time data ofP- andS-waves from local earthquakes. A damped least-squares method is applied in the inversion.The data used are 994P-wave arrival times for 177 events which have epicenters in the region covered by the Friuli seismic network operated by Osservatorio Geofisico sperimentale (OGS) di Trieste, which are jointly inverted for the earthquake hypocenters andP-wave velocity model. TheS-wave velocity model is estimated on the basis of 978S-wave arrival times and the hypocenters obtained from theP-wave arrival time inversion. We also applied an approach thatP- andS-wave arrival time data are jointly used in the inversion (Roecker, 1982). The results show thatS-wave velocity structures obtained from the two methods are quite consistent, butP-wave velocity structures have obvious differences. This is apparent becauseP-waves are more sensitive to the hypocentral location thanS-waves, and the reading errors ofS-wave arrival times, which are much larger than those ofP-waves, bring large location errors in the joint inversion ofP- andS-wave arrival time. The synthetic data tests indicated that when the reading errors ofS-wave arrivals are larger than four times that ofP-wave arrivals, the method proposed in this paper seems more valid thanP- andS-wave data joint inversion. Most of the relocated events occurred in the depth range between 7 and 11 km, just above the biggest jump in velocity. This jump might be related to the detachment line hypothesized byCarulli et al. (1982). From the invertedP- andS-wave velocities, we obtain an average value 1.82 forV p /V s in the first 16 km depth.  相似文献   

3.
The western part of Anatolia is one of the most seismically and tectonically active continental regions in the world, and much of it has been undergoing NS-directed extensional deformation since the Early Miocene. In this study, we determine 3-D tomographic images of the crust under the southwestern part of the North Anatolian Fault Zone by inverting a large number of arrival time data of P and S waves. From the obtained P- and S-wave velocity models, we estimated the Poisson’s ratio structures for a more reliable interpretation of the obtained anomalies. Our tomographic results confirmed the major tectonic features detected by previous studies and revealed new structural heterogeneities related to the active seismotectonics of the studied area. High P-wave velocity anomalies are recognized near the surface, while at deeper crustal layers, low P-wave velocities are widely distributed. The crustal S-wave velocity and Poisson’s ratio exhibit more structural heterogeneities compared to the P-wave velocity structure. Microearthquake activity is intense along highly heterogeneous zones in the southwestern part, which is characterized by low to high P-wave velocity, low S-wave velocity, and high Poisson’s ratio anomalies. Large earthquakes are also concentrated in zones dominated by low velocities and low to high Poisson’s ratios. Results of the checkerboard and synthetic tests indicate that the imaged anomalies are reliable features down to a depth of 25 km. Moreover, they are consistent with many geological and geophysical results obtained by other researchers along the southwestern part of the North Anatolian Fault Zone. An erratum to this article can be found at  相似文献   

4.
The crustal structure of North Abu-Simbel area was studied using spectral ratios of short-period P waves. Three-component short period seismograms from the Masmas seismic station of the Egyptian National Seismic Network Stations were used. The Thomson-Haskell matrix formulation was applied for linearly elastic, homogeneous crustal layers. The obtained model suggests that the crust under the study region consists of a thin (0.8 km) superficial top layer with a P-wave velocity of 3.8±0.7 km/s and three distinct layers with a mean P-wave velocity of 6.6 km/s, overlaying the upper mantle with a P-wave velocity of 8.3 km/s (fixed). The results were obtained for 14 different earthquakes. The P-wave velocities of the three layers are: 5.8±0.6 km/s, 6.5±0.4 km/s and 7.2±0.3 km/s. The total depth to the Moho interface is 32±2 km. The crustal velocity model estimated using observations is relatively simple, being characterized by smooth velocity variations through the middle and lower crust and normal crustal thickness. The resultant crustal model is consistent with the model obtained from previous deep seismic soundings along the northern part of Aswan lake zone.  相似文献   

5.
Acoustic emissions (AE), compressional (P), shear (S) wave velocities, and volumetric strain of Etna basalt and Aue granite were measured simultaneously during triaxial compression tests. Deformation-induced AE activity and velocity changes were monitored using twelve P-wave sensors and eight orthogonally polarized S-wave piezoelectric sensors; volumetric strain was measured using two pairs of orthogonal strain gages glued directly to the rock surface. P-wave velocity in basalt is about 3 km/s at atmospheric pressure, but increases by > 50% when the hydrostatic pressure is increased to 120 MPa. In granite samples initial P-wave velocity is 5 km/s and increases with pressure by < 20%. The pressure-induced changes of elastic wave speed indicate dominantly compliant low-aspect ratio pores in both materials, in addition Etna basalt also contains high-aspect ratio voids. In triaxial loading, stress-induced anisotropy of P-wave velocities was significantly higher for basalt than for granite, with vertical velocity components being faster than horizontal velocities. However, with increasing axial load, horizontal velocities show a small increase for basalt but a significant decrease for granite. Using first motion polarity we determined AE source types generated during triaxial loading of the samples. With increasing differential stress AE activity in granite and basalt increased with a significant contribution of tensile events. Close to failure the relative contribution of tensile events and horizontal wave velocities decreased significantly. A concomitant increase of double-couple events indicating shear, suggests shear cracks linking previously formed tensile cracks.  相似文献   

6.
Seismologically determined properties of the 400 km discontinuity may be compared to experimentally determined properties of the associated phase transformation in order to place constraints upon upper mantle bulk composition. Disagreement among previous studies is commonly ascribed to differences in elastic equations of state (especially to assumptions about pressure and temperature derivatives) between studies. However, much of the disparity between studies is actually due to the selection of different seismic data functionals (P-wave velocity,S-wave velocity, etc.) for comparison to minnral clasticity calculations, rather than to the differences in elasticity data sets and equations of state. Within any given study, bulk sound velocity comparisons generally yield more olivine-rich compositional estimates than doP-wave velocity comparisons, which in turn indicate more olivine thanS-wave velocities. Indeed, such variation in compositional estimates within a given study (arising from choice of data functional) exceeds the variation between studies (arising from elastic equation of state approx mations). it can be argued that bulk sound velocities are better constrained seismologically than densities and, being independent of assumptions about shear moduli, should provide more reliable compositional estimates thanP-orS-wave velocities.Using recently measured bulk and shear moduli equations of state, mutually consistent estimates of upper mantle olivine content can be obtained fromP-wave,S-wave, and bulk sound velocity contrasts at 400 km only if ln /T of has a value of about–2×10–4K–1, yielding approximately 52% olivine by volume. A value of ln /T smaller in magnitude would require reassessment of several underlying assumptions.  相似文献   

7.
—?In order to improve on the accuracy of event locations at teleseismic distances it is necessary to adequately correct for lateral variations in structure along the ray paths, either through deterministic model-based corrections, empirical path/station corrections, or a combination of both approaches. In this paper we investigate the ability of current three-dimensional models of mantle P-wave velocity to accurately locate teleseismic events. We test four recently published models; two are parameterized in terms of relatively long-wavelength spherical harmonic functions up to degree 12, and two are parameterized in terms of blocks of constant velocity which have a dimension of a few hundreds of km. These models, together with detailed crustal corrections, are used to locate a set of 112 global test events, consisting of both earthquakes and explosions with P-wave travel-time data compiled by the Internation al Seismological Centre (ISC). The results indicate that the supposedly higher resolution block models do not improve the accuracy of teleseismic event locations over the longer wavelength spherical harmonic models. For some source locations the block models do not predict the range of observed travel-time residuals as well as the longer wavelength models. The accuracy of the locations largely varies randomly with geographic position although events in central Asia are particularly well located. We also tested the effect of reduced data sets on the locations. Multiple location iterations using 30 P-wave travel times indicate that teleseismic events may be located within an area of 1000?km2 of the true location 66% of the time with only the model-based corrections, and increasing to 75% if calibration information is available. If as few as 8 phases are available then this is possible only 50% of the time. Further refinement in models and/or procedure, such as the addition of P n phases, azimuth data, and consideration of P-wave anisotropy may provide further improvement in the teleseismic location of small events.  相似文献   

8.
—The 3-D P-wave velocity structure of the upper crust in the region of western Greece is investigated by inversion of about 1500 residuals of P-wave arrival times from local earthquake data recorded in the year 1996 by the newly established University of Patras Seismic Network (PATNET). The resulting velocity structure shows strong horizontal variations due to the complicated structure and the variation of crustal thickness. Relatively low-velocity contours are observed in the area defined by Cephallonia—Zakynthos Islands and northwestern Peloponnesos. This is in addition to some well localized peaks of relatively higher values of P-wave velocity may be related to the zone of Triassic evaporites in the region and correspond to diapirism that breaks through to the uppermost layer. Finally, a low P-velocity ‘deeping’ zone extending from Zakynthos to the Gulf of Patras is correlated with Bouguer anomaly map and onshore and offshore borehole drillings which indicate that thick sediments overly the evaporites which exist there at depth greater than 2 km.  相似文献   

9.
A seismic refraction investigation across the southern part of the Oslo Rift has been made, based on quarry blasts at three localities. The study shows a three-layered crust with the followingP-wave velocities: . the upper mantleP-wave celocity, is 8.07 km/s. The velocity-depth relationship for the uppermost crust, obtained by solving the Wiechert-Herglotz integral equation numerically, shows a continuously decreasing velocity gradient in the region of the Oslo Rift which approaches zero at a depth of 9 km, the corresponding increase in theP-wave velocity being from 5.55 km/s to 6.34 km/s. The interface separating the subsurface layer ( =6.60 km/s) from the uppermost layer , interpreted as the Conrad discontinuity, is essentially horizontal in the investigated part of the Oslo Rift at a depth of approximately 15 km. A deep crustal layer with aP-wave velocity of 7.10 km/s appears to be related to the rift, though the top of this layer extends somewhat eastwards beneath the Precambrian rocks from the southern part of the rift at a depth of approximately 20 km. The Moho discontinuity is elevated beneath the Oslo Region compared with the surrounding area. A broad regional gravity high of about 45 mgal is observed along the entire rift zone. It is suggested that this anomaly is caused by the elevation of the sub-Conrad and Moho discontinuities during the rifting processes.  相似文献   

10.
—More than 60 events recorded by four recently deployed seismic broadband stations around Scotia Sea, Antarctica, have been collected and processed to obtain a general overview of the crust and upper mantle seismic velocities.¶Group velocity of the fundamental mode of Rayleigh waves in the period between 10 s to 30–40 s is used to obtain the S-wave velocity versus depth along ten different paths crossing the Scotia Sea region. Data recorded by two IRIS (Incorporated Research Institutions for Seismology) stations (PMSA, EFI) and the two stations of the OGS-IAA (Osservatorio Geofisico Sperimentale—Instituto Antarctico Argentino) network (ESPZ, USHU) are used.¶The Frequency-Time Analysis (FTAN) technique is applied to the data set to measure the dispersion properties. A nonlinear inversion procedure, "Hedgehog," is performed to retrieve the S-wave velocity models consistent with the dispersion data.¶The average Moho depth variation on a section North to South is consistent with the topography, geological observations and Scotia Sea tectonic models.¶North Scotia Ridge and South Scotia Ridge models are characterised by similar S-wave velocities ranging between 2.0 km/s at the surface to 3.2 km/s to depths of 8 km/s. In the lower crust the S-wave velocity increases slowly to reach a value of 3.8 km/s. The average Moho depth is estimated between 17 km to 20 km and 16 km to 19 km, respectively, for the North Scotia Ridge and South Scotia Ridge, while the Scotia Sea, bounded by the two ridges, has a faster and thinner crust, with an average Moho depth between 9 km and 12 km.¶On other paths crossing from east to west the southern part of the Scotia plate and the Antarctic plate south of South Scotia Ridge, we observe an average Moho depth between 14 km and 18 km and a very fast upper crust, compared to that of the ridge. The S-wave velocity ranges between 3.0 and 3.6 km/s in the thin (9–13 km) and fast crust of the Drake Passage channel. In contrast the models for the tip of the Antarctic Peninsula consist of two layers with a large velocity gradient (2.3–3.0 km/s) in the upper crust (6-km thick) and a small velocity gradient (3.0–4.0) in the lower crust (14-km thick).  相似文献   

11.
The attenuation of amplitude is seen in seismic waves which pass through the central region of the Aso caldera, in Kyushu, Japan. It is also recognized from spectral analysis of seismic waves that the higher frequencies of the P-wave are reduced in the waves which pass through the central region of the caldera. It is shown that the relative attenuation increases remarkably for the frequency range of 5 to 10 Hz. The specific attenuation factor Q of the P-wave train is about 100. From the surface projection of the ray paths with low Q values through the Aso caldera to each station, the attenuating region is located beneath the center of the caldera, extending to the north of the central cones. In conjunction with the low Q value of the P-wave and the decreases of S-wave amplitudes, the relative P-wave residual times have comparatively large values for seismic waves passing through the central region beneath the caldera. In order to attempt to provide additional information on the depth configuration of the attenuating material, the ray paths of P-wave's first arrivals are located in three-dimensional space. It indicates that the low-velocity material is located beneath the center of the caldera at depths of about 6 to 9 km. However, lowvelocity anomalies above the depth of 6 km and below the depth of 15 km were not able to be detected, because most of the available seismic ray paths had crossed the caldera at depths of about 6 to 15 km. Furthermore, the relative residual times have numerous errors resulting from incorrect hypocenter locations, origin times, inhomogeneities in the structure and uncertainty of the velocity structure. At shallow depths in the Aso caldera, refraction or reflection studies are required for an accurate estimate of the structure and more detailed properties of the attenuating material.  相似文献   

12.
TheP-arrival times of local and regional earthquakes that are outside of a small network of seismometers can be used to interpret crustal parameters beneath the network by employing the time-term technique. Even when the estimate of the refractor velocity is poorly determined, useful estimates of the station time-terms can be made. The method is applied to a 20 km diameter network of eight seismic stations which was operated near Castaic, California, during the winter of 1972–73. The stations were located in sedimentary basins. Beneath the network, the sedimentary rocks of the basins are known to range from 1 to more than 4 km in thickness. Relative time-terms are estimated fromP-waves assumed to be propagated by a refractor in the mid-crust, and again fromP-waves propagated by a refractor in the upper basement. For the range of velocities reported by others, the two sets of time-terms are very similar. They suggest that both refractors dip to the southwest, and the geology also indicates that the basement dips in this direction. In addition, theP-wave velocity estimated for the refractor of mid-crustal depths, roughly 6.7 km/sec, agrees with values reported by others. Thus, even in this region of complicated geologic structure, the method appears to give realistic results.  相似文献   

13.
Since 1972, Weir-Jones Engineering Consultants (WJEC) has been involved in the development and installation of microseismic monitoring systems for the mining, heavy construction and oil/gas industries. To be of practical value in an industrial environment, microseismic monitoring systems must produce information which is both reliable and timely. The most critical parameters obtained from a microseismic monitoring system are the real-time location and magnitude of the seismic events. Location and magnitude are derived using source location algorithms that typically utilize forward modeling and iterative optimal estimation techniques to determine the location of the global minimum of a predefined cost function in a three-dimensional solution space. Generally, this cost function is defined as the RMS difference between measured seismic time series information and synthetic measurements generated by assuming a velocity structure for the area under investigation (forward modeling). The seismic data typically used in the source location algorithm includes P- and S-wave arrival times, and raypath angles of incidence obtained from P-wave hodogram analysis and P-wave first break identification. In order to obtain accurate and timely source location estimates it is of paramount importance that the extraction of accurate P-wave and S-wave information from the recorded time series be automated—in this way consistent data can be made available with minimal delay. WJEC has invested considerable resources in the development of real-time digital filters to optimize extraction, and this paper outlines some of the enhancements made to existing Kalman Filter designs to facilitate the automation of P-wave first break identification.  相似文献   

14.
Statistical properties of small-scale inhomogeneities (wavelengths between 20 and 70 km) near the core-mantle boundary are inferred from scattered core waves. Observations of scattered core waves at large seismic arrays and worldwide networks indicate that the inhomogeneities have a global nature with similar characteristics. However, there may exist a few regions having markedly stronger or weaker strengths. Scattering by volumetric inhomogeneities of about 1% inP-wave velocity in the lower mantle or by about 300 m of topographic relief of the core-mantle boundary can explain the observations. At present it is not possible to rule out either of these two alternatives, or a combination of both.  相似文献   

15.
The source parameters of the M W = 7.6 Olyutorskii earthquake were estimated using the moments of the slip rate function with degrees 1 and 2. The moments were estimated from broadband P-wave records at 52 stations of the worldwide network. The first step was to find a function S(t) for each station; this function is an apparent source time function, i.e., the P-wave slip as radiated by the source toward a station under consideration. The method of empirical Green’s functions was used to estimate S(t). The next step was to calculate the moments of S(t) of degrees 1 and 2 over time and to set up relevant equations to be solved by least squares for the unknown source moments. The horizontal linear source was used as a nonparametric model for calculating the source moments. Haskell’s parametric model was used for further interpretation of the source moments. The resulting estimates are as follows: the source centroid was 13–25 km southwest of the epicenter, the source was 105–120 km long, the source strike was 222°–228°, the rupture velocity was 2.7–3.0 km/s, and the total radiation duration was 24–27 s. These estimates indicate a bilateral rupture dominated by a southwestward sense of rupture propagation. The source characteristics are consistent with the aftershock area geometry and with the focal mechanism, as well as with surface breakage as observed by geologists in the field.  相似文献   

16.
In this paper, regionalP-wave upper mantle structure is investigated using slant-stack velocity analysis of short-period earthquake data recorded at station MAJO (Matsushiro, Japan). Shallow earthquakes from 1980–1986 within 35° of MAJO are used to construct a common receiver gather. Processing of the wavefield data includes focal depth and static time corrections, as well as deterministic deconvolution, in order to equalize pulse shapes and align wavelets on the first arrivals. The processed wavefield data are slant stacked and interatively downward continued to obtain a regional upper mantle velocity model. The model includes a low velocity zone between 107 and 220 km. Beneath the LVZ, the velocity increases smoothly down to the discontinuity at 401 km. In the transition zone, the velocity model again increases linearly, although there is some suggestion of further complexity in the downward continued wavefield data. At the base of the transition zone, a second velocity discontinuity occurs at 660 km, with a linear velocity gradient below. In addition to slant-stack analysis, travel times and synthetic seismograms are computed and compared with the processed and unprocessed wavefield data.  相似文献   

17.
The paper presents an analysis of the crust and upper mantle structure in the central Fennoscandian shield based on new P- and S-wave 2D velocity models of the BALTIC wide-angle reflection and refraction profiles. Using reprocessing of the old data, new P- and S-wave velocity models and V P /V S ratio distribution were developed. Moving from SW to NE, the thickness of the crust varies strongly, from ∼36 km to extremely thick, 58–64 km, crossing Wiborg rapakivi massif, Saimaa and Outokumpu areas, and Eastern Finland complex. Based on the lateral variations of V P , V P /V S and thickness of the crust, three main blocks of the crust and upper mantle were distinguished from SW to NE: southwestern, associated with Wiborg rapakivi massif; the central, having the highest thickness of the crust; and the northeastern, not well documented, with Archaean basement.  相似文献   

18.
The Thurber iterative simultaneous inversion program is used to determine the three-dimensionalP-wave velocity structure in the Aswan seismic region of Egypt. The tomographic inversion presented in this study is based on 1131P-phase observations at 13 stations from 89 local earthquakes, all of which occurred within the Kalabsha fault zone. The assumed initial velocity model is that deduced from local explosion experiments. The results indicate that the Aswan region is characterized by a heterogeneous crust, consisting of a shallow, low-velocity zone and a deeper high-velocity anomaly. Seismic velocity structure within the shallow part demonstrates that the inferred change in velocity exists primarily across the east-west trending Kalabsha fault scarp, whereas the high-velocity zone is located south of this fault. Two well-resolved, low-velocity zones appear within the upper 6 km of the crust. The first coincides with a graben structure located between the Kalabsha and Seiyal faults and the second exists between the N-S Kurkur fault and the main axis of Lake Aswan. Both low-velocity zones occupy an area of approximately 30×40 km, located along the western bank of the lake. The most significant result of this study is that the location of the deeper, high-velocity anomaly coincides with the concentration of seismic activity in the lower crustal layer.  相似文献   

19.
—The West Bohemian seismoactive region is situated near the contact of the Moldanu bian, Bohemian and Saxothuringian units in which a large volume is occupied by granitoid massifs. The spatial distribution of P-wave velocities and the rock fabric of five representative samples from these massifs were studied. The P-wave velocities were measured on spherical samples in 132 independent directions under hydrostatic pressure up to 400 MPa, using the pulse-transmission method. The pressure of 400 MPa corresponds to a depth of about 15 km in the area under study. The changes of P-wave velocity were correlated with the preferred orientations of the main rock fabric elements, i.e., rock forming minerals and microcracks. The values of the P-wave velocity from laboratory measurements on granite samples fit the velocity model used by seismologists in the West Bohemian seismoactive region.  相似文献   

20.
The P- and S-wave receiver functions and dispersion curves of the fundamental Rayleigh wave are used to study the lithosphere within the Central Anatolian Plateau. The results for eight broadband seismic stations are presented. It is established that within the plateau, the crust with a thickness of about 35 km is underlain by the mantle lid with its bottom at a depth of about 60 km. The velocities of longitudinal (Vp) and shear (Vs) waves in this layer are at most 7.6 and 4.5 km/s, respectively, and the Vp/Vs ratio is close to 1.7 (i.e., by 6% lower than in the standard IASP91 and PREM models). Such a low velocity ratio is characteristic of rocks having high orthopyroxene content. Beneath the high-velocity mantle lid, the S-wave velocity decreases to 4.0–4.2 km/s and the Vp/Vs ratio is close to its standard value (1.8). At most stations, the P-wave receiver functions do not contain seismic phase P410s, which is formed at the global seismic boundary at a depth of 410 km. The seismic boundary at a depth of 410 km is related to the olivine-spinel phase transformation, and its absence can indicate the anomalously low olivine content and high basalt content. This anomaly is probably associated with the subduction of a large amount of oceanic crust during the closure of the Tethys. The results of the study overall indicate the high informativity of the used method.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号