首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
Abstract: Sulfur isotope data (δ34S) of sulfides of more than 6700 samples from 157 ore deposits associated with Early and Late Yanshanian granitic and volcanic activities in South China are reviewed and summarized. Averaged δ34S values of individual deposits vary from ‐9. 3 to +20. 6%, and show a normal distribution pattern with the average of +2%. About 88 % of the ore deposits have values within the range, ?2.5 ? +13.6‰, of associated Yanshanian granitoids. There is a temporal‐spatial variation of δ34S values of the ore deposits. However, no clear zonal distribution parallel to geotectonic NNE lineaments was observed. Spatial distribution of ore sulfide δ34S values in most of the NE part of the whole studied area coincides with that of Yanshanian granitoids and volcanic rocks. A downward tendency of the average values in time is: +3. 0% (n=7, J1) → +1. 6% (n=29, J2) → +1. 7% (n=68, J3) → +1. 8% (n=37, K1) → ?1. 5% (n=16, K2). There is an “island” of high and variable δ34S values (0? +16.5‰) occurring within a generally low trough zone (?8 ? 0%) of N‐S about 800 km and E‐W 100 to 300 km, bounded by 110°E ? 116°E longitudes and 22°N ? 31°N latitudes. The island occurs at the junction of three tectonic units and a NE‐trending crustal matching line implying a variety of magmatism occurred at the junction. The low trough zone coincides with a low ferric/ferrous ratio zone of Early Yanshanian granitoids, indicating their genetic relationship. Different genetic types of ore deposits show different histogram patterns suggesting different relationships to magmatic rocks and host strata. Granite/greisen/pegmatite type deposits are most closely associated with granitoids, with average ore sul‐fide δ34S values for individual ore deposits ranging between ‐2. 0 and +4. 1%, and an average of +0. 5% (n = 15) close to type meteoric value of 0%. Porphyry‐type deposits have also narrow range of ?2.2 ? + 4.9‰, with an average value of +1. 1% (n = 18). Skarn‐type dominated ore deposits have a nearly normal distribution pattern with an average of +1. 6% (n = 62), ranging from ‐5. 3 to +11. 5%. Volcano‐subvolcanic ore deposits range between ‐3. 1 and +5. 9% with an average of +2. 3% (n = 19). Other types of hydrothermal ore deposits have averaged δ34S values of individual ones from ‐9. 3 to +20. 6%, with average value of +1. 3% (n=43). Vertical and horizontal zonations of δ34S values of ore deposits around their associated granitoid plutons are observed in several localities. Such zonations may be caused by interaction between magma and/or magmatic fluids and host sedimentary rocks, as well as the evolution of physico‐chemical conditions of ore‐forming fluids. Spatial distribution of ore sulfur isotope compositions is also clearly controlled by tectonics and deep faults. Ore sulfur isotope composition is sometimes strongly affected by host sedimentary rocks, especially by evaporite sulfur with much higher δ34S value and partly by biogenic sulfur with low δ34S value. The δ34S values of Yanshanian granitoids are from ‐2. 5 to +13. 6% for both rock samples and pyrite/pyrrhotite separates from granitic rocks, with similar spatial distribution pattern to those of associated ore deposits. The ore deposits associated with ilmenite‐series granitoids have δ34S values ranging between ‐7. 5 and +10. 4% with an average of +1. 0%, while the ore deposits associated with magnetite‐series granitoids ranging between ?8.0 ? +11.5‰ with an average of +1. 1%. δ34S values of ore deposits tend to converge to +3% as the Fe2O3/FeO ratio of associated granitoids increases from 0. 45 to 8. 7.  相似文献   

2.
Many metallic ore deposits of the Late Cretaceous to Early Tertiary periods are distributed in the Gyeongsang Basin. Previous and newly analyzed sulfur isotope data of 309 sulfide samples from 56 ore deposits were reviewed to discuss the genetic characteristics in relation to granitoid rocks. The metallogenic provinces of the Gyeongsang Basin are divided into the Au–Ag(–Cu–Pb–Zn) province in the western basin where the sedimentary rocks of the Shindong and Hayang groups are distributed, Pb–Zn(–Au–Ag–Cu), Cu–Pb–Zn(–Au–Ag), and Fe–W(–Mo) province in the central basin where the volcanic rocks of the Yucheon Group are dominant, and Cu(–Mo–W–Fe) province in the southeastern basin where both sedimentary rocks of the Hayang Group and Tertiary volcanic rocks are present. Average sulfur isotope compositions of the ore deposits show high tendencies ranging from 2.2 to 11.7‰ (average 5.4‰) in the Pb–Zn(–Au–Ag–Cu) province, ?0.7 to 11.5‰ (average 4.6‰) in the Cu–Pb–Zn(–Au–Ag) province, and 3.7 to 11.4‰ (average 7.5‰) in the Fe–W(–Mo) province in relation to magnetite‐series granitoids, whereas they are low in the Au–Ag(–Cu–Pb–Zn) province in relation to ilmenite‐series granitoids, ranging from ?2.9 to 5.7‰ (average 1.7‰). In the Cu(–Mo–W–Fe) province δ34S values are intermediate ranging from 0.3 to 7.7‰ (average 3.6‰) and locally high δ34S values are likely attributable to sulfur derived from the Tertiary volcanic rocks during hydrothermal alteration through faults commonly developed in this region. Magma originated by the partial melting of the 34S‐enriched oceanic plate intruded into the volcanic rocks and formed magnetite‐series granitoids in the central basin, which contributed to high δ34S values of the metallic deposits. Conversely, ilmenite‐series granitoids were formed by assimilation of sedimentary rocks rich in organic sulfur that influenced the low δ34S values of the deposits in the western and southeastern provinces.  相似文献   

3.
Abstract. Isotope composition of whole rock sulfur has been measured on 14 schists, 10 gneisses, 7 gabbroids, 7 granitoids and 2 sedimentary rocks, with of 9 sulfide (pyrite) sulfurs in gabbros and granitoids, from the southwestern part of the Ryeongnam Massif, Korea. The δ34S values of schists range from -4.6 to +6.1 % (average +0.9 %), those of gneisses from -4.0 to +0.8 % (-1.9%), those of gabbroids from -2.3 to +3.7 % (+1.0 %), and those of granitoids from -5.9 to +3.2 % (-1.9 %). The δ34S values of pyrite separated from gabbros and granitoids show rather heavier values ranging from +3.1 to +9.4 % with an average of+5.8%.
Though the δ34S values of whole rock sulfur give wide range of -5.9 to +6.1 %, the average of about -0.5 % is close to the mantle value. The granitoids sampled at the central parts of intrusive bodies or at the contacts with other plutonic rocks tend to show positive values, while those sampled near the boundary with basement rocks such as granitic gneiss and por-phyroblastic gneiss show negative values. Though the reason of this tendency is not clear at present, the δ34S values of some granitoids in this area seem to represent possible influence by the assimilation of country rocks, particularly of gneisses.
Average isotopic compositions of ore sulfur from individual metal deposits in the studied area are summarized to have a range of+1.0 to +7.8 % with an average value of+3.2 %. The values are consistent with the previous finding that the ore sulfur isotopic values of the Ryeongnam Massif are the lowest among the four tectonic belts in Korea; Gyeonggi Massif, Ogcheon Belt, Ryeongnam Massif, and Gyeongsang Basin. This feature may reflect the isotopic compositions of plutonic rocks and basements in this area, which are characterized by relatively low values around zero permil.  相似文献   

4.
Abstract: In order to know the cause of the high δ34S values of the Korean ore deposits (Ishihara et al., 2000), Geumseong molybdenum skarn deposit and related Jurassic granitoids and Cambro-Ordovician carbonates were selected for the δ34S analyses. Two sulfide samples occurring in hydrothermal veins in fresh granitoids quarry at Songhaksan yielded δ34S values of +6.9 and +8.8 permil. These are slightly higher than +5.3 permil δ34S of the averaged rock sulfides for the Jurassic Daebo granitoids. Pyrite and molybdenite from the Geumseong deposit vary from +8.6 to +11.5 permil (average + 10.7 permil). The intruded carbonates contain very low amount of SSS (structurally substituted sulfate) as 2.9 to 8.1 ppm with high δ34S values between +28.8 and + 40.0 permil, and sulfides sulfur of 52 to 779 ppm with variable δ34S values between +3.2 and +22.5 per–mil. It is concluded that sulfur of the host carbonates was extracted and migrated into the skarn deposit at the time of the granitoid intrusion and the related hydrothermal convection, on the basis of the location of the skarn deposit occurring between the carbonates and Jurassic granitoids, and of very low contents of SSS sulfur in the carbonates. A part of SSS possibly contaminated into the Jurassic granite.  相似文献   

5.
In Kamchatka, Central Koryak, Central Kamchatka and East Kamchatka metallogenic belts are distributed from northwest to southeast. K–Ar age, sulfur isotopic composition of sulfide minerals, and bulk chemical compositions of ores were analyzed for 13 ore deposits including hydrothermal gold‐silver and base metal, in order to elucidate the geological time periods of ore formation, relationship to regional volcanic belts, type of mineralization, and origin of sulfur in sulfides. The dating yielded ore‐forming ages of 41 Ma for the Ametistovoe deposit in the Central Koryak, 17.1 Ma for the Zolotoe deposit and 6.9 Ma for the Aginskoe deposit in the Central Kamchatka, and 7.4 Ma for the Porozhistoe deposit and 5.1 Ma for the Vilyuchinskoe deposit in the East Kamchatka metallogenic belt. The data combined with previous data of ore‐forming ages indicate that the time periods of ore formation in these metallogenic belts become young towards the southeast. The averaged δ34SCDT of sulfides are ?2.8‰ for the Ametistovoe deposit in Central Koryak, ?1.8‰ to +2.0‰ (av. ?0.1‰) for the Zolotoe, Aginskoe, Baranievskoe and Ozernovskoe deposits in Central Kamchatka, and ?0.7 to +3.8‰ (av. +1.7‰) for Bolshe‐Bannoe, Kumroch, Vilyuchinskoe, Bystrinskoe, Asachinskoe, Rodnikovoe, and Mutnovskoe deposits in East Kamchatka. The negative δ34SCDT value from the Ametistovoe deposit in Central Koryak is ascribed to the contamination of 32S‐enriched sedimentary sulfur in the Ukelayat‐Lesnaya River trough of basement rock. Comparison of the sulfur isotope compositions of the mineral deposits shows similarity between the Central Koryak and Magadan metallogenic belts, and East Kamchatka and Kuril Islands belts. The Central Kamchatka belt is intermediate between these two groups in term of sulfur isotopic composition.  相似文献   

6.
The source of sulfur in giant Norilsk-type sulfide deposits is discussed. A review of the state of the problem and a critical analysis of existing hypotheses are made. The distribution of δ34S in sulfides of ore occurrences and small and large deposits and in normal sedimentary, metamorphogenic, and hypogene sulfates is considered. A large number of new δ34S data for sulfides and sulfates in various deposits, volcanic and terrigenous rocks, coals, graphites, and metasomatites are presented. The main attention is focused on the objects of the Norilsk and Kureika ore districts. The δ34S value varies from -14 to + 22.5‰ in sulfides of rocks and ores and from 15.3 to 33‰ in anhydrites. In sulfide-sulfate intergrowths and assemblages, δ34S is within 4.2-14.6‰ in sulfides and within 15.3-21.3‰ in anhydrites. The most isotopically heavy sulfur was found in pyrrhotite veins in basalts (δ34S = 21.6‰), in sulfate veins cutting dolomites (δ34S = 33‰), and in subsidence caldera sulfates in basalts (δ34S = 23.2-25.2‰). Sulfide ores of the Tsentral’naya Shilki intrusion have a heavy sulfur isotope composition (δ34S = + 17.7‰ (n = 15)). Thermobarogeochemical studies of anhydrites have revealed inclusions of different types with homogenization temperatures ranging from 685 °C to 80 °C. Metamorphogenic and hypogene anhydrites are associated with a carbonaceous substance, and hypogene anhydrites have inclusions of chloride-containing salt melts. We assume that sulfur in the trap sulfide deposits was introduced with sulfates of sedimentary rocks (δ34S = 22-24‰). No assimilation of sulfates by basaltic melt took place. The sedimentary anhydrites were “steamed” by hydrocarbons, which led to sulfate reduction and δ34S fractionation. As a result, isotopically light sulfur accumulated in sulfides and hydrogen sulfide, isotopically heavy sulfur was removed by aqueous calcium sulfate solution, and “residual” metamorphogenic anhydrite acquired a lighter sulfur isotope composition as compared with the sedimentary one. The wide variations in δ34S in sulfides and sulfates are due to changes in the physicochemical parameters of the ore-forming system (first of all, temperature and Pch4) during the sulfate reduction. The regional hydrocarbon resources were sufficient for large-scale ore formation.  相似文献   

7.
Granitoids and Their Magnetic Susceptibility in South Korea   总被引：1，自引：0，他引：1  
Abstract: Magnetic susceptibility (MS) measurements were carried out for 1,120 samples in the Middle Proterozoic to Early Tertiary granitoids so far recognized in South Korea, and the lateral and spatial variation of their magnetic susceptibility, i.e., content of magnetite, is studied. The Middle Proterozoic two mica granitoids related to cassiterite (Sn) deposits in northeastern part of the Sobaegsan Massif show very low MS (less than 0.3 A‐ 10‐3 SI unit), and the Permo‐Triassic tonalitic to granodioritic and monzonitic rocks which are barren in mineralization, distributed in the middle part of South Korea also show low MS (less than 1 A‐ 10‐3 SI unit). On the contrary the Late Triassic to Jurassic granitoids (= Daebo granitoids) which were evolved from tonalite through granodiorite to granite, and are most widely distributed in South Korea, show a wide variation on MS. Particularly in the Andong, Igsan, Gimcheon and Geochang areas, the granitoids which are barren in mineralization, are characterized by high MS (more than 10 A‐ 10‐3 SI unit). The Chuncheon, Jecheon, Namyang and Geumsan plutons related to molybdenite (Mo) and/or wolframite or scheelite (W), and fluorite (F) mineralizations show a little high MS (more than 3 A‐ 10‐3 SI unit). However, more than 60% of the Daebo granitoids show low MS (less than 3 A‐ 10‐3 SI unit) and the rest show a little high MS (more than 3 A‐ 10‐3 SI unit). Heterogeneous distribution of magnetite content in the Daebo granitoids is considered to reflect heterogeneity of redox state of the source materials for these granitoids. The Cretaceous to Early Tertiary granitoids (= Bulgugsa granitoids) in the Gyeongsang Basin had been generally evolved in the order of tonalite, diorite, granodiorite, granite and alkali‐feldspar granites, which are closely related to base metal ore deposits, and mostly show higher MS (more than 3 A‐ 10‐3 SI unit) than other granitoids mentioned above, although some exceptions are recognized in highly evolved alkali‐feldspar granites (SiO2 > 76%). In contrast, as most of the highly oxidized or evolved Cretaceous granitoids distributed in areas other than the Gyeongsang Basin show lower MS than those of the Gyeongsang Basin, and appear to be magnetite free, ilmenite‐series granites, but they might be hematite bearing magnetite‐series granitoids. Highly oxidized nature of the Bulgugsa granitoids may be due to high Fe2O3/FeO ratio of the source materials and also high level intrusion style of the granitic magma activities. Most of the granitic rocks of the Middle Proterozoic, Permo‐Triassic and more than 60% of the Late Triassic to Jurassic (Daebo granitoids) belong to ilmenite–series, however less than 40% of the Daebo granitoids and most Cretaceous ones are magnetite–series. Thus, the granitic magma intruded in Korean Peninsula became oxidized while the intrusive ages become younger.  相似文献   

8.
We investigated the Jurassic Daebo and Cretaceous Bulguksa granitic rocks in South Korea. The former are distributed mainly in the Gyeonggi and Yeongnam massifs and the latter are present in the Gyeongsan basin and Ogcheon belt. The Daebo granitic rocks generally are of ilmenite series and I to S type. These rocks are associated with Au–Ag hydrothermal deposits, whereas the Bulguksa granitic rocks are of magnetite series and I type, and are associated with Pb–Zn, Cu and Mo–W hydrothermal deposits, as well as Au–Ag hydrothermal deposits. The Daebo granitic rocks show adakitic signatures in their chemical compositions. They are considered to have been derived from partial melting of the thick lower continental crust. Conversely, the Bulguksa granitic rocks in the Gyeongsan basin are non‐adakitic and are considered to have been derived from partial melting of a mantle wedge. Magmas of the Daebo granitic rocks formed at relatively shallow levels, but solidified at deep levels compared with those of the Bulguksa granitic rocks. The Bulguksa granitic rocks in the central to western Ogcheon belt are considered to have been formed by fractionation of magmas derived from partial melting of continental crust. The total Al contents of biotite and hornblende in the granitic rocks increased, with the Bulguksa granitic rocks in the Gyeongsan basin < the Bulguksa granitic rocks in the Ogcheon belt and Gyeonggi and Yeongnam massifs and the Daebo granitic rocks in the Ogcheon belt < the Daebo granitic rocks in the Gyeonggi and Yeongnam massifs. This order corresponds to an increase in solidification depth.  相似文献   

9.
Central Fujian Rift is another new and important volcanogenic massive sulfide Pb-Zn polymetallic metallogenetic belt. In order to find out the material genesis and mineralization period of Meixian-type Pb-Zn-Ag deposits, S and Pb isotope analysis and isotope geochronology of ores and wall rocks for five major deposits are discussed. It is concluded that the composition of sulfur isotope from sulfide ore vary slightly in different deposits and the mean value is close to zero with the 834S ranging from -3.5‰ to ＋5.6‰ averaging at ＋2.0‰, which indicates that the sulfur might originate from magma or possibly erupted directly from volcano or was leached from ore-hosted volcanic rock. The lead from ores in most deposits displays radioactive genesis character （206pb/204pb〉18.140, 207Pb/204pb〉15.584, 208pb/204pb〉38.569） and lead isotope values of ores are higher than those of wall rocks, which indicates that the lead was likely leached from the ore-hosted volcanic rocks. Based on isotope data, two significant Pb-Zn metallogenesis are delineated, which are Mid- and Late-Proterozoic sedimentary exhalative metailogenesis （The single zircon U-Pb, Sm-Nd isochronal and Ar-Ar dating ages of ore- hosted wall rocks are calculated to be among 933-1788 Ma.） and Yanshanian magmatic hydrothermal superimposed and alternated metallogenesis （intrusive SHRIMP zircon U-Pb and Rb-Sr isochronal ages between 127-154 Ma）.  相似文献   

10.
The Ohori ore deposit is one of the Cu–Pb–Zn deposits in the Green Tuff region, NE Japan, and consists of skarn‐type (Kaninomata) and vein‐type (Nakanomata) orebodies. The former has a unique origin because its original calcareous rocks were made by hydrothermal precipitation during Miocene submarine volcanism. Carbon and oxygen isotope ratios of skarn calcite and sulfur isotope ratios of sulfides were measured in and around the deposit. Carbon and oxygen isotope ratios of the skarn calcite are δ13C = ?15.51 to ?5.1‰, δ18O = +3.6 to +22.5‰. δ13C values are slightly lower than those of the Cretaceous skarn deposits in Japan. These isotope ratios of the Kaninomata skarn show that the original calcareous rocks resemble the present submarine hydrothermal carbonates at the CLAM Site, Okinawa Trough, than Cenozoic limestones, even though some isotopic shifts had occurred during later skarnization. δ34S ratios of the sulfide minerals from the Kaninomata and Nakanomata orebodies are mostly in a narrow range of +4.0 to +7.0‰ and they resemble each other, suggesting the same sulfur origin for the both deposits. The magnetite‐series Tertiary Kaninomatasawa granite is distributed just beneath the skarn layer and has δ34S ratios of +7.5 to 8.1‰. The heavy sulfur isotope ratio of the skarn sulfides may have been affected by the Kaninomatasawa granite.  相似文献   

11.
城门山及武山铜矿床的硫同位素研究   总被引：1，自引：0，他引：1  
地质概况江西城门山矿床和武山矿床是长江中下游铁铜成矿带大冶-九江成矿亚带东南部位的两个与斑岩有成因关系的铜矿床。在地质构造上,前者处于九江-瑞昌东西向拗陷带中的长山-城门湖背斜倾伏端的北翼,后者处在横立山-黄桥向斜东端的北翼。两矿区的地层分布相似,主要是志留系至三叠系地层。其中,泥盆系上统五通组砂岩及石炭系中统黄龙组灰岩与矿床关系密切。  相似文献   

12.
The Jinshachang lead–zinc deposit is mainly hosted in the Upper Neoproterozoic carbonate rocks of the Dengying Group and located in the Sichuan–Yunnan–Guizhou(SYG) Pb–Zn–Ag multimetal mineralization area in China.Sulfides minerals including sphalerite,galena and pyrite postdate or coprecipitate with gangue mainly consisting of fluorite,quartz,and barite,making this deposit distinct from most lead–zinc deposits in the SYG.This deposit is controlled by tectonic structures,and most mineralization is located along or near faults zones.Emeishan basalts near the ore district might have contributed to the formation of orebodies.The δ34S values of sphalerite,galena,pyrite and barite were estimated to be 3.6‰–13.4‰,3.7‰–9.0‰,6.4‰ to 29.2‰ and 32.1‰–34.7‰,respectively.In view of the similar δ34S values of barite and sulfates being from the Cambrian strata,the sulfur of barite was likely derived from the Cambrian strata.The homogenization temperatures(T ≈ 134–383°C) of fluid inclusions were not suitable for reducing bacteria,therefore,the bacterial sulfate reduction could not have been an efficient path to generate reduced sulfur in this district.Although thermochemical sulfate reduction process had contributed to the production of reduced sulfur,it was not the main mechanism.Considering other aspects,it can be suggested that sulfur of sulfides should have been derived from magmatic activities.The δ34S values of sphalerite were found to be higher than those of coexisting galena.The equilibrium temperatures calculated by using the sulfur isotopic composition of mineral pairs matched well with the homogenization temperature of fluid inclusions,suggesting that the sulfur isotopic composition in ore-forming fluids had reached a partial equilibrium.  相似文献   

13.
Abstract. Sulfur isotope ratios of cinnabar from Hg deposits and stibnite, jamesonite and berthierite from Sb deposits in Japan are examined in order to understand metallogeneses of Hg and Sb deposits in Japanese island arcs. The studied Hg and Sb deposits include the Hg deposit at Yamato‐suigin (Honshu) and the Sb deposit at Ichinokawa (Shikoku) in the Southwest Japan arc. In addition, Hg deposits including Itomuka and Ryushoden in central Hokkaido and Hg and Sb mineralizations in Northeast Japan arc are examined. The δ34S values of cinnabar from the Hidaka‐Kitami district, central Hokkaido, including the Itomuka and Ryushoden deposits range widely, from ‐10 to +16 %o, the highest values encountered at the Samani deposit. The δ34S values of cinnabar from other areas in Japan range from ‐12 to +5 %o, having δ34S values higher than +2 %o from southwestern Hokkaido (Meiji deposit), Shikoku (Suii deposit) and Kyushu (Hasami and Yamagano deposits). On the other hand, the δ34S values of stibnite from all areas in Japan range from ‐14 to +5 %o, having positive δ34S values higher than +2 %o up to +5 %o from southwestern Hokkaido (Yakumo, Toyotomi and Teine deposits) and eastern‐central Honshu (Hachiman and Daikoku deposits). The variation in δ34S values of Hg and Sb deposits may reflect the variation in δ34S values of country rocks or variation in mixing ratio of sulfur extracted from the country rocks, sulfur derived from seawater sulfate, and sulfur derived from magmatic emanations. The relatively high δ34S values of cinnabar and stibnite higher than +2 %o from southwestern Hokkaido, eastern‐central Honshu and Kyushu are probably caused by contribution of volcanic emanation from arc magmas having positive σδ34S values, whereas the positive δ34S values of cinnabar higher than +2 %o from Suii deposit in Shikoku may be attributed to structurally substituted sulfate in limestone country rocks and/or sulfur derived from seawater sulfate. However, the wide range of the δ34S values of cinnabar from the Hidaka‐Kitami district, central Hokkaido, is difficult to explain at this moment. Other relatively low, negative δ34S values of cinnabar and stibnite, berthierite from other areas in Japan may be attributed to 1) incorporation of isotopically light sedimentary sulfur or sulfur derived from ilmenite‐series silicic magma, or 2) less contribution of volcanic emanation from arc magmas having positive σδ34S values.  相似文献   

14.
The Bleiberg Pb-Zn deposit in the Drau Range is the type locality of Alpine-type carbonate-hosted Pb-Zn deposits. Its origin has been the subject of on-going controversy with two contrasting genetic models proposed: (1) the SEDEX model, with ore forming contemporaneously with sedimentation of the Triassic host rocks at about 220 Ma vs. (2) the epigenetic MVT model, with ores forming after host rock sedimentation at about 200 Ma or later. Both models assume that, on a deposit or even district scale, a fixed paragenetic sequence of ore minerals can be established. The results of our detailed petrographic, chemical and sulfur isotope study of two key ore-samples from two major ore horizons in the Wetterstein Formation at Bleiberg (EHK02 Erzkalk horizon and Blb17 Maxer Bänke horizon) demonstrate that there is no fixed paragenetic sequence of ore minerals. Small-scale non-systematic variations are recorded in textures, sphalerite chemistry and δ34S. In each sample, texturally different sphalerite types (colloform schalenblende, fine- and coarse-grained crystalline sphalerite) co-occur on a millimeter to centimeter scale. These sphalerites represent multiple mineralization stages/pulses since they differ in their trace element inventory and in their δ34S. Nonetheless, there is some correspondence of sphalerite micro-textures, sulfur isotope and chemical composition between the two samples, with microcrystalline colloform schalenblende being Fe-rich, having high Fe/Cd (15 and 9, respectively) and a light sulfur isotope composition (δ34S −26.0 to −16.2‰). Cadmium-rich and Fe-poor sphalerite in both samples has relatively heavier sulfur isotope composition: in sample EHK02 this sphalerite has Fe/Cd of ∼0.5 and δ34S from −6.6 to −4.6‰; in sample Blb17 Fe/Cd is ∼0.1 and δ34S ranges from −15.0 to −1.5‰. Barite, which is restricted to sample EHK02, has δ34S ≈ 17‰. The large variations in δ34S recorded on the mm to cm-scale is consistent with variable contributions of reduced sulfur from two different sulfur reservoirs. The dominant reservoir with δ34S values <−20‰ likely results from local bacteriogenic sulfate reduction (BSR), whereas the second reservoir, with δ34S about −5‰ suggests a hydrothermal source likely linked with thermochemical sulfate reduction (TSR). Based on this small- to micro-scale study, no simple, deposit-wide paragenetic and sulfur isotope evolution with time can be established. In the Erzkalk ore (sample EHK02) an earlier Pb-Zn-Ba stage, characterized by heavy sulfur isotope values, is succeeded by a light δ34S-dominated Zn-Pb-F stage. In contrast, the several mineralization pulses identified in the stratiform Zn-Pb-F Maxer Bänke ore (sample Blb17) define a broad trend to heavier sulfur isotope values with time. The interaction documented in these samples between two sulfur reservoirs is considered a key mechanism of ore formation.  相似文献   

15.
More than 200 analyses of the sulfur isotopic composition of sulfides from various terrigenous and intrusive host rocks, metasomatically altered wall rocks, and gold lodes of the Upper Kolyma region are presented. In accessory pyrite of the metaterrigenous rocks, δ34S varies from ?23.1 to +5.7‰ δ34S of pyrite and arsenopyrite from gold-quartz mineralization is within the range ?10.6 to ?0.4‰ and is close to the average δ34S of pyrite from the metaterrigenous rocks (?4.4‰). In the intrusive rocks, δ34S of pyrite varies from ?3.8 to +2.6‰ (+0.7‰, on average) and drastically differs from δ34S of arsenopyrite from postmagmatic gold-rare-metal mineralization (?7.9 to ?2.7‰; ?5.2‰, on average). The comparison of the δ34S of accessory sulfides from the host rocks with δ34S of sulfides from the gold deposits suggests that sulfur mobilized from the terrigenous sequences participated in the hydrothermal process. The results obtained are consistent with the metamorphic model of the formation of gold-quartz deposits in the Upper Kolyma region.  相似文献   

16.
The Huangshilao gold deposit (>13.5 t Au) is comprised of stratabound pyrite‐dominant massive sulfide ores, and is distinguished from the skarn Cu, Au, and Cu–Au deposits that are dominant in the Tongguanshan orefield, Tongling, east‐central China. The stratabound orebodies are situated along flexural slip faults along the unconformity between the Upper Devonian Wutong and the Upper Carboniferous Huanglong Formations. The ores, dominated by crystallized pyrite, colloform pyrite, and pyrrhotite, are systematically sampled from the underground stopes along strike drifts. The δ34S values of ore sulfides yield a wide variation from ?11.3 to 11.4‰, but mostly within 4–8‰, corresponding to the δ34S range (3.4–8.7‰) of the Yanshanian Tongguanshan and Tianshan quartz diorite intrusions in the Tongguanshan orefield, suggesting a magmatic dominated sulfur source. Few obvious negative δ34S values are induced by an involvement of sedimentation‐related biogenic sulfur. The wide δ34S variation denotes an incongruent physical and chemical interaction of the two sources. Combined analysis of gold contents and sulfur isotopes of the sulfides show that the magmatic hydrothermal solution provides primary metals despite a small quantity that may have been contributed by the sedimentary pyrites. The hydrothermal alteration, thermal metamorphism, trace element concentration in pyrites, and existing aeromagnetic data jointly suggest that the hydrothermal fluid migrated vertically from an intrusion below, along the flexural slip faults, but not laterally from the nearby outcrop of Tianshan stock.  相似文献   

17.
The S-isotope composition (δ34SCDT) of 213 samples of sulfides, sulfates and native sulfur from the pyrite mineralizations of southern Tuscany and associated country rocks were determined. The sulfur isotopic composition of pyrite is quite homogeneous and similar for all studied ore bodies, with an average δ34S value near +9,5‰. Pyrite disseminated within the Filladi di Boccheggiano formation, and thought to be authigenic, shows a much larger range of δ34S values (-13.1 to +14.5‰). The isotopic compositions of other sulfides associated with pyrite in the deposits show that isotopic equilibrium among sulfides was approached on a regional scale, but seldom fully attained. Isotopic data suggest that sedimentary marine sulfate was the ultimate source of sulfur in ores. Sulfates (mostly anhydrite) from the sulfate-carbonate lenses associated with both the Filladi di Boccheggiano and the Calcare Cavernoso formations also have similar and homogeneous compositions (average δ34S=+15–16‰). Coexisting sulfates and sulfides are not in isotopic equilibrium. In the light of the isotopic data, among the many proposed genetic models for the largest stratabound pyrite bodies the two following alternatives appear the most likely: 1) in agreement with recently suggested hypotheses, the ore bodies are older than the emplacement of the Mio-Pliocenic granitoids in the area, and are probably hydrothermal-sedimentary in origin, coeval with associated country rocks; 2) the ore bodies were formed as a consequence of bacterial reduction of anhydrite in low-temperature convection systems related to the early stages of the Mio-Pliocenic thermal anomaly. In both cases, the emplacement of the Mio-Pliocenic granitoids caused metamorphism and remobilization of the pre-existing ores, producing smaller discordant mineralized bodies.  相似文献   

18.
The Martabe Au–Ag deposit, North Sumatra Province, Indonesia, is a high sulfidation epithermal deposit, which is hosted by Neogene sandstone, siltstone, volcanic breccia, and andesite to basaltic andesite of Angkola Formation. The deposit consists of six ore bodies that occurred as silicified massive ore (enargite–luzonite–pyrite–tetrahedrite–tellurides), quartz veins (tetrahedrite–galena–sphalerite–chalcopyrite), banded sulfide veins (pyrite–tetrahedrite–sphalerite–galena) and cavity filling. All ore bodies are controlled by N–S and NW–SE trending faults. The Barani and Horas ore bodies are located in the southeast of the Purnama ore body. Fluid inclusion microthermometry, and alunite‐pyrite and barite‐pyrite pairs sulfur isotopic geothermometry show slightly different formation temperatures among the ore bodies. Formation temperature and salinity of fluid inclusions of the Purnama ore body range from 200 to 260 C and from 6 to 8 wt.% NaCl equivalent, respectively. Formation temperature and salinity of fluid inclusions of the Barani ore body range from 200 to 220 °C and from 0 to 2.5 wt.% NaCl equivalent and those of the Horas ore body range from 240 to 275 °C and from 2 to 3 wt.% NaCl equivalent, respectively. The Barani and Horas ore bodies are less silicified and sulfides are less abundant than the Purnama ore body. A relationship between enthalpy and chloride content indicates mixing of hot saline fluids with cooler dilute fluids during the mineralization of each of the ore bodies. The δ18O values of quartz samples from the southeast ore bodies exhibit a wide range from +4.2 to +12.9‰ with an average value of +7.0‰. The δ18O values of H2O estimated from δ18O values of quartz, barite and calcite confirm the oxygen isotopic shift to near meteoric water trend, which support the incorporation of meteoric water. Salinity of the fluid inclusions decrease from >5 wt.% NaCl equivalent in the Purnama ore body to <3 wt.% NaCl equivalent in the Barani ore body, indicating different fluid systems during mineralization. The δ34S values of sulfide and sulfate in Purnama range from ? 4.2 to +5.5‰ and from +1.2 to +26.7‰, those in the Barani range from ? 4.3 to +26.4‰ and from +3.9 to +18.5‰ and those in the Horas ore body range from ? 11.8 to +3.5‰ and from +1.4 to +25.7‰, respectively. The δ34S of total bulk sulfur in southeastern ore bodies (Σδ34S) was estimated to be approximately +6‰. The estimated sulfur fugacity during formation of the Purnama and Horas ore bodies is relatively high. It was between 10?4.8 and 10?10.8 atm at 220 to 260 °C. Tellurium fugacity was between 10?7.8 and 10?9.5 atm at 260 °C and between 10?9 and 10?10.6 atm at 220 °C in the Purnama ore body. The Barani ore body was formed at lower fS2, lower than about 10?14 atm at 200 to 220 °C based on the presence of arsenopyrite and pyrrhotite in the early stage, and between 10?14 and 10?12 atm based on the existence of enargite and tennantite in the last stage. © 2016 The Society of Resource Geology  相似文献   

19.
Messinian gypsum deposits from Dir El-Baraqan area, Northern Coast of Egypt, were investigated by stable sulfur isotope method, X-ray diffraction, infrared spectroscopy, optical microscopy, and scanning electron microscopy to differentiate features formed under substantial microbial influences as indicator of paleoenvironments. Petrographically, gypsum deposits were classified into three types: biolaminated gypsum, disordered selenite, and swallow-tail selenitic crystals. Biolaminated gypsum is characterized by regular alternating dark and light laminae, which were formed due to the seasonal environmental changes in Dir El-Baraqan area. Stable sulfur isotope data show that the gypsum deposits are characterized by δ34S values ranging from +18.1 to +28.1 ‰. In swallow-tail gypsum, the δ34S values are characterized by a narrow range (from +20.0 to +20.2 ‰) which is considered as the primary phase. In biolaminated gypsum, the δ34S values ranged from +22.8 to +28.1 ‰ which is considered as the secondary phase. However, the white laminae are characterized by δ34S values ranging from +22.8 to +24.1 ‰, while dark laminae are characterized by δ34S values ranging from +27.2 to +28.1 ‰. The high δ34S values of dark laminae revealed the increasing activity of sulfate-reducing bacteria.  相似文献   

20.
The Jebel Ressas Pb–Zn deposits in North‐Eastern Tunisia occur mainly as open‐space fillings (lodes, tectonic breccia cements) in bioclastic limestones of the Upper Jurassic Ressas Formation and along the contact of this formation with Triassic rocks. The galena–sphalerite association and their alteration products (cerussite, hemimorphite, hydrozincite) are set within a calcite gangue. The Triassic rocks exhibit enrichments in trace metals, namely Pb, Co and Cd enrichment in clays and Pb, Zn, Cd, Co and Cr enrichment in carbonates, suggesting that the Triassic rocks have interacted with the ore‐bearing fluids associated with the Jebel Ressas Pb–Zn deposits. The δ18O content of calcite associated with the Pb–Zn mineralization suggests that it is likely to have precipitated from a fluid that was in equilibrium with the Triassic dolostones. The δ34S values in galenas from the Pb–Zn deposits range from ?1.5 to +11.4‰, with an average of 5.9‰ and standard deviation of 3.9‰. These data imply mixing of thermochemically‐reduced heavy sulfur carried in geothermal‐ and fault‐stress‐driven deep‐seated source fluid with bacterially‐reduced light sulfur carried in topography‐driven meteoric fluid. Lead isotope ratios in galenas from the Pb–Zn deposits are homogenous and indicate a single upper crustal source of base‐metals for these deposits. Synthesis of the geochemical data with geological data suggests that the base‐metal mineralization at Jebel Ressas was formed during the Serravallian–Tortonian (or Middle–Late Miocene) Alpine compressional tectonics.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号