共查询到20条相似文献，搜索用时 31 毫秒
1.
《International Geology Review》2012,54(11):1271-1283
Tiburon Basin is characterized by a thick sedimentary fill that records the evolution of one of the rift segments of the East Pacific Rise. Its structure corresponds to an echelon pull-apart basin bounded by two dextral-oblique faults. Unlike basins in the southern Gulf of California that are underlain by oceanic crust, rift basins in the northern Gulf of California contain sedimentary thickness (up to 6 km) that masks the structure of the crust. To study the architecture of the Tiburon Basin, two-dimensional, multichannel seismic reflection data collected by Petróleos Mexicanos (PEMEX) in the early 1980s were used. The data base is a grid of lines, 5–20 km apart, with 6 s of record in 48 channels. Additional seismic data of the Ulloa 99 project were also interpreted. Our results indicate that the general structural pattern of the Tiburon Basin is controlled by two dextral-oblique faults: De Mar and Tiburon. De Mar lies to the east and ends in elevated basement transferring the stress to the Desemboque fault. The latter borders the incoming basement from the Sonora and Tiburon faults to the west, ending to the north in an antiform. Four structural domains are recognized: (1) the northern Tiburon domain is a high basement that divides the Delfin Basin to the northeast and exhibits extensional folds with their axes parallel to the basement and its flanks; (2) the Libertad domain is a sheared basement high along the margin of Sonora and forms the right step of the Tepoca Basin to the north; (3) the Tiburon central domain defines a broad sag cut by a dense NE-striking pattern of normal faults with opposed dips in the depocentre and abruptly ends to the west against the Tiburon fault; and (4) the southern Tiburon domain forms a basement ramp offshore Isla Tiburon and is controlled by a pattern of NNE-striking normal faults on the south that likely connect at an oblique angle (?60°) to the De Mar fault. We propose a rhombochasm basin model with more than 6 s of sedimentary record in the depocentre, in which the basement is not recorded. The NW-trending faults in the Libertad domain possibly continue towards the Sonora coastal plain. The principal NW-trending dextral faults and the secondary NNE-striking pattern of normal faults cut the shallow strata of this domain. 相似文献
2.
The study provides a regional seismic interpretation and mapping of the Mesozoic and Cenozoic succession of the Lusitanian Basin and the shelf and slope area off Portugal. The seismic study is compared with previous studies of the Lusitanian Basin. From the Late Triassic to the Cretaceous the study area experienced four rift phases and intermittent periods of tectonic quiescence. The Triassic rifting was concentrated in the central part of the Lusitanian Basin and in the southernmost part of the study area, both as symmetrical grabens and half-grabens. The evolution of half-grabens was particularly prominent in the south. The Triassic fault-controlled subsidence ceased during the latest Late Triassic and was succeeded by regional subsidence during the early Early Jurassic (Hettangian) when deposition of evaporites took place. A second rift phase was initiated in the Early Jurassic, most likely during the Sinemurian–Pliensbachian. This resulted in minor salt movements along the most prominent faults. The second phase was concentrated to the area south of the Nazare Fault Zone and resulted here in the accumulation of a thick Sinemurian–Callovian succession. Following a major hiatus, probably as a result of the opening of the Central Atlantic, resumed deposition occurred during the Late Jurassic. Evidence for Late Jurassic fault-controlled subsidence is widespread over the whole basin. The pattern of Late Jurassic subsidence appears to change across the Nazare Fault Zone. North of the Nazare Fault, fault-controlled subsidence occurred mainly along NNW–SSE-trending faults and to the south of this fault zone a NNE–SSW fault pattern seems to dominate. The Oxfordian rift phase is testified in onlapping of the Oxfordian succession on salt pillows which formed in association with fault activity. The fourth and final rift phase was in the latest Late Jurassic or earliest Early Cretaceous. The Jurassic extensional tectonism resulted in triggering of salt movement and the development of salt structures along fault zones. However, only salt pillow development can be demonstrated. The extensional tectonics ceased during the Early Cretaceous. During most of the Cretaceous, regional subsidence occurred, resulting in the deposition of a uniform Lower and Upper Cretaceous succession. Marked inversion of former normal faults, particularly along NE–SW-trending faults, and development of salt diapirs occurred during the Middle Miocene, probably followed by tectonic pulses during the Late Miocene to present. The inversion was most prominent in the central and southern parts of the study area. In between these two areas affected by structural inversion, fault-controlled subsidence resulted in the formation of the Cenozoic Lower Tagus Basin. Northwest of the Nazare Fault Zone the effect of the compressional tectonic regime quickly dies out and extensional tectonic environment seems to have prevailed. The Miocene compressional stress was mainly oriented NW–SE shifting to more N–S in the southern part. 相似文献
3.
Domenico Ridente Umberto Fracassi Daniela Di Bucci Fabio Trincardi Gianluca Valensise 《Tectonophysics》2008,453(1-4):110
Recent seismicity in and around the Gargano Promontory, an uplifted portion of the Southern Adriatic Foreland domain, indicates active E–W strike-slip faulting in a region that has also been struck by large historical earthquakes, particularly along the Mattinata Fault. Seismic profiles published in the past two decades show that the pattern of tectonic deformation along the E–W-trending segment of the Gondola Fault Zone, the offshore counterpart of the Mattinata Fault, is strikingly similar to that observed onshore during the Eocene–Pliocene interval. Based on the lack of instrumental seismicity in the south Adriatic offshore, however, and on standard seismic reflection data showing an undisturbed Quaternary succession above the Gondola Fault Zone, this fault zone has been interpreted as essentially inactive since the Pliocene. Nevertheless, many investigators emphasised the genetic relationships and physical continuity between the Mattinata Fault, a positively active tectonic feature, and the Gondola Fault Zone. The seismotectonic potential of the system formed by these two faults has never been investigated in detail. Recent investigations of Quaternary sedimentary successions on the Adriatic shelf, by means of very high-resolution seismic–stratigraphic data, have led to the identification of fold growth and fault propagation in Middle–Upper Pleistocene and Holocene units. The inferred pattern of gentle folding and shallow faulting indicates that sediments deposited during the past ca. 450 ka were recurrently deformed along the E–W branch of the Gondola Fault Zone.We performed a detailed reconstruction and kinematic interpretation of the most recent deformation observed along the Gondola Fault Zone and interpret it in the broader context of the seismotectonic setting of the Southern Apennines-foreland region. We hypothesise that the entire 180 km-long Molise–Gondola Shear Zone is presently active and speculate that also its offshore portion, the Gondola Fault Zone, has a seismogenic behaviour. 相似文献
4.
The Lower Galilee and the Yizre'el Valley, northern Israel, are an extensional domain that has been developing since the Miocene, prior and contemporaneously to the development of the Dead Sea Fault (DSF). It is a fan-shaped region bounded in the east by the N–S trending main trace of the DSF, in the north by the Bet-Kerem Fault system, and in the south by the NW–SE trending Carmel Fault. The study area is characterized by high relief topography that follows fault-bounded blocks and flexures at a wavelength of tens of km. A synthesis of the morphologic–structural relations across the entire Galilee region suggests the following characteristics: (1) Blocks within the Lower Galilee tilt toward both the southern and northern boundaries, forming two asymmetrical half-graben structures, opposite facing, and oblique to one another. (2) The Lower Galilee's neighboring blocks, which are the Upper Galilee in the north and the Carmel block in the southwest, are topographically and structurally uplifted and tilted away from the Lower Galilee. (3) The southern half-graben, along the Carmel Fault, is topographically and structurally lower than the northern one. Combining structural and geological data with topographic analysis enables us to distinguish several stages of structural and morphological development in the region. Using a semi-quantitative evolutionary model, we explain the morpho-structural evolution of the region. Our results indicate that the Galilee developed as a set of two isostatically supported opposite facing half-grabens under varying stress fields. The southern one had started developing as early as the early Miocene prior to the formation of the DSF. The northern and younger one has been developing since the middle Pliocene as part of the extension process in the Galilee. Elevation differences between the two half-grabens and their bounding blocks are explained by differences in isostatic subsidence due to sedimentary loading and uplift of the northern half-graben due to differential influences of the regional folding. 相似文献
5.
阿尔金断裂晚新生代左旋走滑位错的地质新证据 总被引：20，自引：5，他引：20
通过对沿阿尔金断裂中段 (位于东经 88°至 92°)发育的晚第三纪走滑盆地沉积历史和走滑变形过程的野外观测以及对第四纪索尔库里盆地形成和演化过程的沉积环境复原的分析 ,提出了阿尔金断裂中段晚新生代左旋走滑位错的地质新证据。研究表明 ,晚第三纪走滑盆地经历了中新世晚期至上新世早期斜张走滑拉分和上新世晚期以来左旋错动的演化过程 ,沉积体沿断裂的错位分布特征指示至少发生了 80 km的左旋走滑位错。发育于阿尔金山链内部的索尔库里盆地起源于晚第三纪早期强烈的侵蚀作用 ,成为柴达木盆地快速沉积的主要物源区。该侵蚀盆地于中晚更新世闭合并演化成一个独立的沉积盆地。通过侵蚀盆地外流通道的复原指示阿尔金断裂自晚第三纪以来累积了 80～ 1 0 0 km的左旋位错。在此基础上 ,结合穿越断裂构造的 级区域水系形成的洪积裙宽度和主干河道沿断裂迹线的拐折长度 ,探讨了阿尔金断裂晚新生代左旋走滑位错量沿走向分布的特征 ,估算了左旋走滑速率 相似文献
6.
More than 1400 km of two-dimensional seismic data were used to understand the geometries and structural evolution along the western margin of the Girardot Basin in the Upper Magdalena Valley. Horizons are calibrated against 50 wells and surface geological data (450 km of traverses). At the surface, low-angle dipping Miocene strata cover the central and eastern margins. The western margin is dominated by a series of en echelon synclines that expose Cretaceous–Oligocene strata. Most synclines are NNE–NE trending, whereas bounding thrusts are mainly NS oriented. Syncline margins are associated mostly with west-verging fold belts. These thrusts started deformation as early as the Eocene but were moderately to strongly reactivated during the Andean phase. The Girardot Basin fill records at least four stratigraphic sequences limited by unconformities. Several periods of structural deformation and uplifting and subsidence have affected the area. An early Tertiary deformation event is truncated by an Eocene unconformity along the western margin of the Girardot Basin. An Early Oligocene–Early Miocene folding and faulting event underlies the Miocene unconformity along the northern and eastern margin of the Girardot Basin. Finally, the Late Miocene–Pliocene Andean deformation folds and erodes the strata along the margins of the basin against the Central and Eastern Cordilleras. 相似文献
7.
The NW–SE-striking Northeast German Basin (NEGB) forms part of the Southern Permian Basin and contains up to 8 km of Permian to Cenozoic deposits. During its polyphase evolution, mobilization of the Zechstein salt layer resulted in a complex structural configuration with thin-skinned deformation in the basin and thick-skinned deformation at the basin margins. We investigated the role of salt as a decoupling horizon between its substratum and its cover during the Mesozoic deformation by integration of 3D structural modelling, backstripping and seismic interpretation. Our results suggest that periods of Mesozoic salt movement correlate temporally with changes of the regional stress field structures. Post-depositional salt mobilisation was weakest in the area of highest initial salt thickness and thickest overburden. This also indicates that regional tectonics is responsible for the initiation of salt movements rather than stratigraphic density inversion.Salt movement mainly took place in post-Muschelkalk times. The onset of salt diapirism with the formation of N–S-oriented rim synclines in Late Triassic was synchronous with the development of the NNE–SSW-striking Rheinsberg Trough due to regional E–W extension. In the Middle and Late Jurassic, uplift affected the northern part of the basin and may have induced south-directed gravity gliding in the salt layer. In the southern part, deposition continued in the Early Cretaceous. However, rotation of salt rim synclines axes to NW–SE as well as accelerated rim syncline subsidence near the NW–SE-striking Gardelegen Fault at the southern basin margin indicates a change from E–W extension to a tectonic regime favoring the activation of NW–SE-oriented structural elements. During the Late Cretaceous–Earliest Cenozoic, diapirism was associated with regional N–S compression and progressed further north and west. The Mesozoic interval was folded with the formation of WNW-trending salt-cored anticlines parallel to inversion structures and to differentially uplifted blocks. Late Cretaceous–Early Cenozoic compression caused partial inversion of older rim synclines and reverse reactivation of some Late Triassic to Jurassic normal faults in the salt cover. Subsequent uplift and erosion affected the pre-Cenozoic layers in the entire basin. In the Cenozoic, a last phase of salt tectonic deformation was associated with regional subsidence of the basin. Diapirism of the maturest pre-Cenozoic salt structures continued with some Cenozoic rim synclines overstepping older structures. The difference between the structural wavelength of the tighter folded Mesozoic interval and the wider Cenozoic structures indicates different tectonic regimes in Late Cretaceous and Cenozoic.We suggest that horizontal strain propagation in the brittle salt cover was accommodated by viscous flow in the decoupling salt layer and thus salt motion passively balanced Late Triassic extension as well as parts of Late Cretaceous–Early Tertiary compression. 相似文献
8.
Stanislaw Mazur Magdalena Scheck-Wenderoth Piotr Krzywiec 《International Journal of Earth Sciences》2005,94(5-6):782-798
Several selected seismic lines are used to show and compare the modes of Late-Cretaceous–Early Tertiary inversion within the
North German and Polish basins. These seismic data illustrate an important difference in the allocation of major zones of
basement (thick-skinned) deformation and maximum uplift within both basins. The most important inversion-related uplift of
the Polish Basin was localised in its axial part, the Mid-Polish Trough, whereas the basement in the axial part of the North
German Basin remained virtually flat. The latter was uplifted along the SW and to a smaller degree the NE margins of the North
German Basin, presently defined by the Elbe Fault System and the Grimmen High, respectively. The different location of the
basement inversion and uplift within the North German and Polish basins is interpreted to reflect the position of major zones
of crustal weakness represented by the WNW-ESE trending Elbe Fault System and by the NW-SE striking Teisseyre-Tornquist Zone,
the latter underlying the Mid-Polish Trough. Therefore, the inversion of the Polish and North German basins demonstrates the
significance of an inherited basement structure regardless of its relationship to the position of the basin axis. The inversion
of the Mid-Polish Trough was connected with the reactivation of normal basement fault zones responsible for its Permo-Mesozoic
subsidence. These faults zones, inverted as reverse faults, facilitated the uplift of the Mid-Polish Trough in the order of
1–3 km. In contrast, inversion of the North German Basin rarely re-used structures active during its subsidence. Basement
inversion and uplift, in the range of 3–4 km, was focused at the Elbe Fault System which has remained quiescent in the Triassic
and Jurassic but reproduced the direction of an earlier Variscan structural grain. In contrast, N-S oriented Mesozoic grabens
and troughs in the central part of the North German Basin avoided significant inversion as they were oriented parallel to
the direction of the inferred Late Cretaceous–Early Tertiary compression. The comparison of the North German and Polish basins
shows that inversion structures can follow an earlier subsidence pattern only under a favourable orientation of the stress
field. A thick Zechstein salt layer in the central parts of the North German Basin and the Mid-Polish Trough caused mechanical
decoupling between the sub-salt basement and the supra-salt sedimentary cover. Resultant thin-skinned inversion was manifested
by the formation of various structures developed entirely in the supra-salt Mesozoic–Cenozoic succession. The Zechstein salt
provided a mechanical buffer accommodating compressional stress and responding to the inversion through salt mobilisation
and redistribution. Only in parts of the NGB and MPT characterised by either thin or missing Zechstein evaporites, thick-skinned
inversion directly controlled inversion-related deformations of the sedimentary cover. Inversion of the Permo-Mesozoic fill
within the Mid-Polish Trough was achieved by a regional elevation above uplifted basement blocks. Conversely, in the North
German Basin, horizontal stress must have been transferred into the salt cover across the basin from its SW margin towards
the basins centre. This must be the case since compressional deformations are concentrated mostly above the salt and no significant
inversion-related basement faults are seismically detected apart from the basin margins. This strain decoupling in the interior
of the North German Basin was enhanced by the presence of the Elbe Fault System which allowed strain localization in the basin
floor due to its orientation perpendicular to the inferred Late Cretaceous–Early Tertiary far-field compression. 相似文献
9.
The east–west-trending North Anatolian Fault makes a 17° bend in the western Marmara region from a mildly transpressional segment to a strongly transtensional one. We have studied the changes in the morphology and structure around this fault bend using digital elevation models, field structural geology, and multi-channel seismic reflection profiles. The transpression is reflected in the morphology as the Ganos Mountain, a major zone of uplift, 10 km wide and 35 km long, elongated parallel to the transpressional Ganos Fault segment west of this bend. Flat-lying Eocene turbidites of the Thrace Basin are folded upwards against this Ganos Fault, forming a monocline with the Ganos Mountain at its steep southern limb and the flat-lying hinterland farther north at the flat limb. The sharp northern margin of the Ganos Mountain coincides closely with the monoclinal axis. The strike of the bedding, and the minor and regional fold axes in the Eocene turbidites in Ganos Mountain are parallel to the trace of the Ganos Fault indicating that these structures, as well as the morphology, have formed by shortening perpendicular to the North Anatolian Fault. The monoclinal structure of Ganos Mountain implies that the North Anatolian Fault dips under this mountain at 50°, and this ramp terminates at a decollement at a calculated depth of 8 km. East of this fault bend, the northward dip of the North Anatolian Fault is maintained but it has a normal dip-slip component. This has led to the formation of an asymmetric half-graben, the Tekirdağ Basin in the western Sea of Marmara, containing a thickness of up to 2.5 km of Pliocene to Recent syn-transform sediments. As the Ganos uplift is translated eastwards from the transpressional to the transtensional zone, it undergoes subsidence by southward tilting. However, a morphological relic of the Ganos uplift is maintained as the steep northern submarine slope of the Tekirdağ Basin. The minimum of 3.5 km of fault-normal shortening in the Ganos Mountain, and the minimum of 40 km eastward translation of the Ganos uplift indicate that the present fault geometry has existed for at least the last 2 million years. 相似文献
10.
Jean Delteil Jean-François Stéphan Bernard Mercier de Lépinay Étienne Ruellan 《Comptes Rendus Geoscience》2003,335(9):743-750
In eastern North Island New Zealand, oblique subduction of the Pacific Plate beneath the Australian Plate is associated with strain partitioning. Dextral along-strike component of displacement occurred first at Early Miocene major faults within the eastern fore-arc domain. These faults were active from Early Miocene to Pliocene times. Since Pliocene times, most of the movement occurs at western faults such as the Wellington Fault. The latter joins the back-arc domain to the north. The jump of wrench faulting is related to the oblique opening of the back-arc domain. Both phenomena are impeded southwards by the Hikurangi oceanic plateau entering the subduction zone. To cite this article: J. Delteil et al., C. R. Geoscience 335 (2003). 相似文献
11.
Several models of basin inversion described in the literature are tested in a study of Triassic and Early Jurassic strata exposed along the southern margin of the Bristol Channel Basin in Somerset, England that has been exhumed by <3 km. Two key features of the superbly exposed normal faults are that they formed at several times during basin evolution—not during Triassic to Early Jurassic growth, but during Late Jurassic rifting, and during and after inversion; and that >95% of them are still in net extension, despite widespread kinematic evidence for reverse reactivation. When coupled with the general absence of thin-skinned thrusts and the widespread occurrence of regional contractional folds, it appears that none of three main inversion models—the fault-reactivation model, the thin-skinned model and the buttress model—are by themselves applicable. We erect a new model of basin inversion, the distributed deformation model, which consists of three stages of basin inversion. Stage one involved early partial reactivation of large-displacement steep normal faults. Stage two was dominated by folding, wherein fault blocks underwent oblique (non-coaxial) shortening by map scale folding, accompanied by formation of outer arc normal faults, minor cleavage and neoformed thrusts. Stage three involved reverse reactivation of outer arc normal faults and activation of oblique and strike-slip faults that partitioned deformation into compartments. 相似文献
12.
《International Geology Review》2012,54(3):322-336
Eight two-dimensional, multichannel seismic reflection lines were acquired, processed, and interpreted to study the structure of the Altar Basin, which is part of the Salton Trough tectonic province. We identified two basin-bounding zones characterized by different degrees of strain: the Cerro Prieto–Altar deformation zone (CPADZ) and the Altar–Caborca deformation zone (ACDZ). The CPADZ is bounded on the west by the Cerro Prieto fault and on the east by the Altar fault. To the north, the strike of both faults changes slightly from a NW to more NNW direction. In the CPADZ, the thickness of the crust decreases southward towards the Gulf of California, and is associated with a deformation-developing fault. The CPADZ has a rotation component orientating these faults in an oblique direction to the Cerro Prieto fault, whereas within the ACDZ, a geometric coherence of synthetic and antithetic faults exists, creating horsts and graben striking N37° W. The Altar fault is recognized by basement interruption, with a vertical component of ～1 km, striking at N37° W and dipping 83° SW. On the northeastern side of the Altar Basin, the basement configuration shows that the minimum time of basement record (～0.4 s of two-way travel time) and the time curve gradient decrease in the NE–SW direction. The depocentre is ～6 km deep in the central-west portion of the basin. We identified a graben between the Rosario and Tinajas Altas mountains (Rosario Basin). The extension–connection of the Altar and Rosario basins to the south is not well defined; nevertheless, these basins could represent the link between the Colorado River and the Gulf of California during the late Miocene, whereas this link was abandoned in the Pliocene as subsidence migrated towards the northwest into the Cerro Prieto and Laguna Salada basins. 相似文献
13.
This study was undertaken to determine the structural evolution of a normal fault array using detailed kinematic analysis of normal fault tip propagation and linkage, adding to the growing pool of research on normal fault growth. In addition, we aim to provide further insight into the evolution of the offshore Otway Basin, Australia. We use three-dimensional (3D) seismic reflection data to analyse the temporal and spatial evolution of a Late Cretaceous–Cenozoic age normal fault array located in the Gambier Embayment of the offshore Otway Basin, South Australia. The seismic reflection data cover a NW–SE-oriented normal fault array consisting of six faults, which have grown from the linkage of numerous, smaller segments. This fault array overlies and has partial dip-linkage to E–W-striking, basement-involved faults that formed during the initial Tithonian–Barremian rifting event in the Otway Basin. Fault displacement analysis suggests four key stages in the post-Cenomanian growth history of the upper array: (1) nucleation of the majority of faults resulting from resumed crustal extension during the early Late Cretaceous; (2) an intra-Late Cretaceous period of general fault dormancy, with the nucleation of only one newly formed fault; (3) latest Cretaceous nucleation of another newly formed fault and further growth of all other faults; and (4) continued growth of all faults, leading to the formation of the Cenozoic Gambier Sub-basin in the Otway Basin. Our analysis also demonstrates that Late Cretaceous faults, which are located above and dip-link to basement-involved faults, display earlier nucleation and greater overall throw and length, compared with those which do not link to basement-involved faults. This is likely attributed to increased rift-related stress concentrations in cover sediments above the upper tips of basement faults. This study improves our understanding of the geological evolution of the presently under-explored Gambier Embayment, offshore Otway Basin, South Australia by documenting the segmented growth style of a Late Cretaceous normal fault array that is located over, and interacts with, a reactivated basement framework. 相似文献
14.
Integration of 11 types of data sets enabled us to determine the location, character and fault history of the southern extension of the Clarendon–Linden Fault System (CLF) in southwestern New York State. The data sets utilized include detailed stratigraphic and fracture measurements at more than 1000 sites, soil gas anomalies, seismic reflection profiles, well logs and lineaments on air photos, topographic maps, Landsat and SLAR images. The seismically active CLF consists of as many as 10 parallel, segmented faults across the fault system. The fault segments are truncated by NW-striking cross-strike discontinuities (CSDs). The faults of the CLF and intersecting CSDs form fault blocks that have semi-independent subsidence and uplift histories. East-dipping reflectors in the Precambrian basement indicate the southward continuation of thrusts of the intra-Grenvillian Elzevir–Frontenac Boundary Zone. These thrusts were reactivated during Iapetan rifting as normal (listric) growth faults. In Ordovician Black River to Trenton time, the southern CLF segments experienced a second phase of growth fault activity, with faults displaying a cumulative stratigraphic throw of as much as 170 m. Thrusting on the same east-dipping Precambrian reflectors typified the CLF in Taconic (post-Trenton) times. Detailed comparisons among the fault segments show that the fault activity in Silurian and Devonian times generally alternated between the western and central main faults. In Late Devonian time, the fault motion reversed from down-on-the-east to down-on-the-west about the time the Appalachian Basin axis passed across the CLF in its westward migration. The deep Precambrian faults of the CLF were thus reactivated as the Appalachian Basin developed in Acadian times. Finally, the CLF thrust fault imaged on seismic line CLF-1 offsets all bedrock (Devonian) units; thus, significant motion occurred along this fault during Late Acadian, or more likely, Alleghanian time. 相似文献
15.
16.
The Baza Fault: a major active extensional fault in the central Betic Cordillera (south Spain) 总被引：2，自引：0，他引：2
P. Alfaro J. Delgado C. Sanz de Galdeano J. Galindo-Zaldívar F. J. García-Tortosa A. C. López-Garrido C. López-Casado C. Marín-Lechado A. Gil M. J. Borque 《International Journal of Earth Sciences》2008,97(6):1353-1365
In the Guadix-Baza Basin (Betic Cordillera) lies the Baza Fault, a structure that will be described for the first time in
this paper. Eight gravity profiles and a seismic reflection profile, coupled with surface studies, indicate the existence
of a NE-dipping normal fault with a variable strike with N-S and NW-SE segments. This 37-km long fault divides the basin into
two sectors: Guadix to the West and Baza to the East. Since the Late Miocene, the activity of this fault has created a half-graben
in its hanging wall. The seismic reflection profile shows that the fill of this 2,000–3,000 m thick asymmetric basin is syntectonic.
The fault has associated seismicity, the most important of which is the 1531 Baza earthquake. Since the Late Tortonian to
the present, i.e. over approximately the last 8 million years, extension rates obtained vary between 0.12 and 0.33 mm/year
for the Baza Fault, being one of the major active normal faults to accommodate the current ENE–WSW extension produced in the
central Betic Cordillera. The existence of this fault and other normal faults in the central Betic Cordillera enhanced the
extension in the upper crust from the Late Miocene to the present in this regional compressive setting. 相似文献
17.
Sebastian A. Turner Jian G. Liu John W. Cosgrove 《Journal of Asian Earth Sciences》2011,40(1):394-402
The Piqiang Fault is a prominent strike-slip (tear) fault that laterally partitions the Keping Shan Thrust Belt in the NW Tarim Basin, China. In satellite images, the Piqiang Fault appears as a sharp, NW-trending lineament that can be traced for more than 70 km. It is oblique to the general structural trend of the thrust belt and subparallel to the thrust transport direction. This paper presents a structural analysis of the Piqiang Fault, based on satellite image interpretation and field data. A net loss of Late Paleozoic sediment across the fault zone implies that it was initiated as a major normal fault during the Early Permian, and corresponds to widespread extension and magmatism during this period. Differential erosion across the fault resulted in the subsequent removal of sediment from the east relative to the west. During the Middle to Late Cenozoic, contraction of the NW Tarim Basin and the formation of the Keping Shan Thrust Belt resulted in reactivation of the Piqiang Fault as a strike-slip (tear) fault. The fault has accommodated lateral differences in thrust density and spacing which have arisen due to the abrupt, pre-existing change in stratigraphic thickness across it. The Piqiang Fault provides an insight into the formation of oblique, strike-slip (tear) faults in contractional belts and demonstrates the importance of inherited basement structures in such settings. 相似文献
18.
《International Geology Review》2012,54(5):547-571
The central Wassuk Range is ideally located to investigate the interplay of Basin and Range extension and Walker Lane dextral deformation along the western Nevada margin of the Basin and Range province. To elucidate the Cenozoic evolution of the range, the author conducted geologic mapping, structural data collection and analysis, geochemical analysis of igneous lithologies, and geochronology. This research delineates a three-stage deformational history for the range. A pulse of ENE–WSW-directed extension at high strain rates (～8.7 mm/yr) was initiated immediately after the eruption of ～15 Ma andesite flows; strain was accommodated by high-angle, closely spaced (1–2 km), east-dipping normal faults which rotated and remained active to low angles as extension continued. A post-12 Ma period of extension at low strain rates produced a second generation of normal faults and two prominent dextral strike–slip faults which strike NW, subparallel to the dextral faults of the Walker Lane at this latitude. A new pulse of ongoing extension began at ～4 Ma and has been accomodated primarily by the east-dipping range-bounding normal fault system. The increase in the rate of fault displacement has resulted in impressive topographic relief on the east flank of the range, and kinematic indicators support a shift in extension direction from ENE–WSW during the highest rates of Miocene extension to WNW–ESE today. The total extension accommodated across the central Wassuk Range since the middle Miocene is >200%, with only a brief period of dextral fault activity during the late Miocene. Data presented here suggest a local geologic evolution intimately connected to regional tectonics, from intra-arc extension in the middle Miocene, to late Miocene dextral deformation associated with the northward growth of the San Andreas Fault, to a Pliocene pulse of extension and magmatism likely influenced by both the northward passage of the Mendocino triple junction and possible delamination of the southern Sierra Nevada crustal root. 相似文献
19.
Crustal memory and basin evolution in the Central European Basin System—new insights from a 3D structural model 总被引：1，自引：2，他引：1
The Central European Basin System (CEBS) is composed of a series of subbasins, the largest of which are (1) the Norwegian–Danish Basin (2), the North German Basin extending westward into the southern North Sea and (3) the Polish Basin. A 3D structural model of the CEBS is presented, which integrates the thickness of the crust below the Permian and five layers representing the Permian–Cenozoic sediments. Structural interpretations derived from the 3D model and from backstripping are discussed with respect to published seismic data. The analysis of structural relationships across the CEBS suggests that basin evolution was controlled to a large degree by the presence of major zones of crustal weakness. The NW–SE-striking Tornquist Zone, the Ringkøbing-Fyn High (RFH) and the Elbe Fault System (EFS) provided the borders for the large Permo–Mesozoic basins, which developed along axes parallel to these fault systems. The Tornquist Zone, as the most prominent of these zones, limited the area affected by Permian–Cenozoic subsidence to the north. Movements along the Tornquist Zone, the margins of the Ringkøbing-Fyn High and the Elbe Fault System could have influenced basin initiation. Thermal destabilization of the crust between the major NW–SE-striking fault systems, however, was a second factor controlling the initiation and subsidence in the Permo–Mesozoic basins. In the Triassic, a change of the regional stress field caused the formation of large grabens (Central Graben, Horn Graben, Glückstadt Graben) perpendicular to the Tornquist Zone, the Ringkøbing-Fyn High and the Elbe Fault System. The resulting subsidence pattern can be explained by a superposition of declining thermal subsidence and regional extension. This led to a dissection of the Ringkøbing-Fyn High, resulting in offsets of the older NW–SE elements by the younger N–S elements. In the Late Cretaceous, the NW–SE elements were reactivated during compression, the direction of which was such that it did not favour inversion of N–S elements. A distinct change in subsidence controlling factors led to a shift of the main depocentre to the central North Sea in the Cenozoic. In this last phase, N–S-striking structures in the North Sea and NW–SE-striking structures in The Netherlands are reactivated as subsidence areas which are in line with the direction of present maximum compression. The Moho topography below the CEBS varies over a wide range. Below the N–S-trending Cenozoic depocentre in the North Sea, the crust is only 20 km thick compared to about 30 km below the largest part of the CEBS. The crust is up to 40 km thick below the Ringkøbing-Fyn High and up to 45 km along the Teisseyre–Tornquist Zone. Crustal thickness gradients are present across the Tornquist Zone and across the borders of the Ringkøbing-Fyn High but not across the Elbe Fault System. The N–S-striking structural elements are generally underlain by a thinner crust than the other parts of the CEBS.The main fault systems in the Permian to Cenozoic sediment fill of the CEBS are located above zones in the deeper crust across which a change in geophysical properties as P-wave velocities or gravimetric response is observed. This indicates that these structures served as templates in the crustal memory and that the prerift configuration of the continental crust is a major controlling factor for the subsequent basin evolution. 相似文献
20.
Yoko Ota Yu-nong Nina Lin Yue-Gau Chen Hui-Cheng Chang Jih-Hao Hung 《Tectonophysics》2006,417(3-4):305-323
We found active faults in the fold and thrust belt between Tunglo town and the Tachia River in northwestern Taiwan. The surface rupture occurred in 1999 and 1935 nearby the study area, but no historical surface rupture is recorded in this area, suggesting that the seismic energy has been accumulated during the recent time. Deformed fluvial terraces aid in understanding late Quaternary tectonics in this tectonically active area. This area contains newly identified faults that we group as the Tunglo Fault System, which formed after the area's oldest fluvial terrace and appears at least 16 km long in roughly N–S orientation. Its progressive deformations are all recorded in associated terraces developed during the middle to late Quaternary. In the north, the system consists of two subparallel active faults, the Tunglo Fault and Tunglo East Fault, striking N–S and facing each other from opposite sides of the northward flowing Hsihu River, whose course may be controlled by interactions of above-mentioned two active faults. The northern part of the Tunglo Fault, to the west of the river, is a reverse fault with upthrown side on the west; conversely the Tunglo East Fault, to the east, is also a reverse fault, but with upthrown side on the east. Both faults are marked by a flexural scarp or eastward tilting of fluvial terraces. Considering a Quaternary syncline lies subparallel to the east of this fault system, the Tunglo Fault might be originated as a bending moment fault and the Tunglo East Fault as a flexural slip fault. However, they have developed as obvious reverse faults, which have progressive deformation under E–W compressive stress field of Taiwan. Farther south, a west-facing high scarp, the Tunglo South Fault, strikes NNE–SSW, oblique to the region's E–W direction of compression. Probably due to the strain partitioning, the Tunglo South Fault generates en echelon, elongated ridges and swales to accommodate right-lateral strike–slip displacement. Other structures in the area include eastward-striking portion of the Sanyi Fault, which has no evidence for late Quaternary surface rupture on this fault; perhaps slip on this part of Sanyi Fault ceased when the Tunglo Fault System became active. 相似文献