首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 357 毫秒
1.
The composite airborne total intensity map of the Southern Granulite Terrain (SGT) at an average elevation of 7000' (≈ 2100 m) shows bands of bipolar regional magnetic anomalies parallel to the structural trends suggesting the distribution of mafic/ultramafic rocks that are controlled by regional structures/shear zones and thrusts in this region. The spectrum and the apparent susceptibility map computed from the observed airborne magnetic anomalies provide bands of high susceptibility zones in the upper crust associated with known shear zones/thrusts such as Transition Zone, Moyar-Bhavani and Palghat-Cauvery Shear Zones (MBSZ and PCSZ). The quantitative modelling of magnetic anomalies across Transition Zone, MBSZ and PCSZ suggest the presence of mafic rocks of susceptibility (1.5-4.0 × 10−3 CGS units) in upper crust from 8-10 km extending up to about 21-22 km, which may represent the level of Curie point geotherm as indicated by high upper mantle heat flow in this section.Two sets of paired gravity anomalies in SGT and their modelling with seismic constraints suggest gravity highs and lows to be caused by high density mafic rocks along Transition Zone and Cauvery Shear Zone (CSZ) in the upper crust at depth of 6-8 km and crustal thickening of 45-46 km south of them, respectively. High susceptibility and high density rocks (2.8 g/cm3) along these shear zones supported by high velocity, high conductivity and tectonic settings suggest lower crustal mafic/ultramafic granulite rocks thrusted along them. These signatures with lower crustal rocks of metamorphic ages of 2.6-2.5 Ga north of PCSZ and Neoproterozoic period (0.6-0.5 Ga) south of it suggest that the SGT represents mosaic of accreted crust due to compression and thrusting. These observations along with N-verging thrusts and dipping reflectors from Dharwar Craton to SGT suggest two stages of N-S directed compression: (i) between Dharwar Craton and northern block of SGT during 2.6-2.5 Ga with Transition Zone and Moyar Shear towards the west as thrust, and (ii) between northern and southern blocks of SGT with CSZ as collision zone and PCSZ as thrust during Neoproterozoic period (0.6-0.5 Ga). The latter event may even represent just a compressive phase without any collision related to Pan-African event. The proposed sutures in both these cases separate gravity highs and lows of paired gravity anomalies towards north and south, respectively. The magnetic anomalies and causative sources related to Moyar Shear, MBSZ and PCSZ join with those due to Transition Zone, Mettur and Gangavalli Shears in their eastern parts, respectively to form an arcuate-shaped diffused collision zone during 2.6-2.5 Ga.Most of the Proterozoic collision zones are highlands/plateaus but the CSZ also known as the Palghat Gap represents a low lying strip of 80-100 km width, which however, appears to be related to recent tectonic activities as indicated by high upper mantle heat flow and thin crust in this section. It is supported by low density, low velocity and high conductive layer under CSZ and seismic activity in this region as observed in case of passive rift valleys. They may be caused by asthenospheric upwarping along pre-existing faults/thrusts (MBSZ and PCSZ) due to plate tectonic forces after the collision of Indian and Eurasian plates since Miocene time.  相似文献   

2.
During 1973–1977, as part of the International Geodynamic Project, some seismic investigations of the Earth's crust have been carried out by geotraverses of the Tien Shan—Pamirs—Karakorum—Himalayas. The seismic data obtained together with other geophysical information, allow the construction and interpretation of the lithospheric section through the Pamirs-Himalayas structure. This section includes thick crust with complex layering, supra-asthenospheric and asthenospheric layers of the upper mantle. The thickness of the Earth's crust increases from 50–55 km in the north, in the Ferghana depression (Tien Shan), to 70–75 km in the south, near the Karakul Lake (Northern Pamir). It varies within 60–65 km for the Central and Southern Pamir, Karakorum and the Inner Himalayas. Its thickness is least (35–37 km) in the south, under the outer margin of the Himalayan foredeep. Extreme gravity minima and depressions on the geoid surface correspond to the regions with maximum thickness of the Earth's crust. The centers of the disturbing masses on the geoid surface are located in the vicinity of the asthenosphere's upper layer; this determines the effect of the whole lithospheric layer, including its asthenospheric layer, at intense changes of gravity anomalies. The asthenospheric upper layer is recorded at a depth of about 120 km, its base at a depth of 200 km, in the northern and southern regions, and 300 km in its central part (Southern Pamir, Karakorum). In the middle asthenospheric layer, wave velocities decrease to 7.5 km/sec, under the base they increase to 8.4 km/sec and reach 9.4 km/sec at a depth of about 400 km. In the supra-asthenospheric layer of the upper mantle, longitudinal and shear wave-velocities slightly increase (by less than 0.1 km/sec) towards its base.  相似文献   

3.
Crustal heterogeneity and seismotectonics of the region around Beijing, China   总被引：18，自引：0，他引：18  
Jinli Huang  Dapeng Zhao   《Tectonophysics》2004,385(1-4):159-180
A detailed three-dimensional (3-D) P-wave velocity model of the crust and uppermost mantle under the Chinese capital (Beijing) region is determined with a spatial resolution of 25 km in the horizontal direction and 4–17 km in depth. We used 48,750 precise P-wave arrival times from 2973 events of local crustal earthquakes, controlled seismic explosions and quarry blasts. These events were recorded by a new digital seismic network consisting of 101 seismic stations equipped with high-sensitivity seismometers. The data are analyzed by using a 3-D seismic tomography method. Our tomographic model provides new insights into the geological structure and tectonics of the region, such as the lithological variations and large fault zones across the major geological terranes like the North China Basin, the Taihangshan and the Yanshan mountainous areas. The velocity images of the upper crust reflect well the surface geological and topographic features. In the North China Basin, the depression and uplift areas are imaged as slow and fast velocities, respectively. The Taihangshan and Yanshan mountainous regions are generally imaged as broad high-velocity zones, while the Quaternary intermountain basins show up as small low-velocity anomalies. Velocity changes are visible across some of the large fault zones. Large crustal earthquakes, such as the 1976 Tangshan earthquake (M=7.8) and the 1679 Sanhe earthquake (M=8.0), generally occurred in high-velocity areas in the upper to middle crust. In the lower crust to the uppermost mantle under the source zones of the large earthquakes, however, low-velocity and high-conductivity anomalies exist, which are considered to be associated with fluids. The fluids in the lower crust may cause the weakening of the seismogenic layer in the upper and middle crust and thus contribute to the initiation of the large crustal earthquakes.  相似文献   

4.
Magnetotelluric soundings (MTS) were conducted in a broad frequency range of 10 kHz to 0.001 Hz at a total of fifty-seven sounding sites of the profile spaced 5 km apart and intersecting the northern Sikhote-Alin across the strike. The analysis of the obtained magnetotelluric parameters has been made which shows three-dimensional geoelectric nonuniformities in the lower crust and upper mantle. The MTS curve interpretation was carried out in the framework of a three-dimensional model. As a result of the inverse problem solution, the geoelectric section has been constructed down to 150 km depth. The section distinguishes the crust with a resistivity higher than 1000 Ohm m and variable thickness between 30 and 40 km which is consistent with deep seismic sounding (DSS) data. The crust is subdivided into four blocks by deep faults, and each block is characterized by a set of parameters. The data support the existence of the Vostochny deep fault in the study area, whereas, on the contrary, the deep roots for the Central Sikhote-Alin fault have not been established. The upper mantle structure is nonuniform; three low-resistivity zones are identified that coincide with the boundaries of crustal blocks. In the revealed zones, an increase in the resistivity is noted from the continent to the Tatar Strait coast. A high-resistivity layer of 300–400 Ohm m was observed in the coastal area, which was steeply dipping from the crustal base down to 120 km depth and extended beneath the continent. Based on a set of geological and geophysical data, the ancient subducting plate is suggested in this area, and the evolutionary model of the region is proposed starting from the Late Cretaceous. The most probable mechanism of conductivity within the upper mantle is determined from petrological and petrophysical data. The low resistivity values are linked to dry peridotite mantle melting.  相似文献   

5.
The results of magnetotelluric sounding are analyzed along the Korfovo-Astashikha-Novosergeevka profile 200 km long in the south of the Amur-Zeya sedimentary basin. The Korfovo-Astashikha and Korfovo-Novosergeevka profiles were sounded in the AMT and AMT + MTS regimes with a step between the observation points of 1 and 5 km, respectively. The shape of the MTS curves, their variations along the profiles, the shape of the polar plots of the main and additional impedance, and the parameters of the heterogeneity (N) and asymmetry (skew) are characterized. The dimensions of the geological medium is estimated and methods of the interpretation of the magnetotelluric data are chosen. The geoelectric sections are constructed for the depths of 3 and 150 km. The structure and electric properties of the sedimentary cover, the Earth’s crust, and the upper mantle are characterized. The thickness of the sedimentary cover in the grabens of the basin attains 1.5–1.7 km. Blocks with various resistivities were identified in the basement. Based on the contrasting changing of the electric resistances, the thickness of the Earth’s crust was determined as 38–40 km, which agrees with that established by the seismic data. The geoelectric structure of the upper mantle of the basin is relatively simple. A layer of elevated resistivity from the first hundreds up to a thousand Ohm · m was identified in the background of the low electric resistivity (20–30 Ohm · m) of the mantle in the depth range of 50–80 km. This layer is discrete and divided on the blocks by the zones of the decreased resistivity penetrating to the middle part of the Earth’s crust and coinciding with faults of various origins. The petroleum prospectives are estimated for the individual grabens of the basin.  相似文献   

6.
The special seismic tectonic environment and frequent seismicity in the southeastern margin of the Qinghai–Tibet Plateau show that this area is an ideal location to study the present tectonic movement and background of strong earthquakes in mainland China and to predict future strong earthquake risk zones. Studies of the structural environment and physical characteristics of the deep structure in this area are helpful to explore deep dynamic effects and deformation field characteristics, to strengthen our understanding of the roles of anisotropy and tectonic deformation and to study the deep tectonic background of the seismic origin of the block's interior. In this paper, the three-dimensional(3D) P-wave velocity structure of the crust and upper mantle under the southeastern margin of the Qinghai–Tibet Plateau is obtained via observational data from 224 permanent seismic stations in the regional digital seismic network of Yunnan and Sichuan Provinces and from 356 mobile China seismic arrays in the southern section of the north–south seismic belt using a joint inversion method of the regional earthquake and teleseismic data. The results indicate that the spatial distribution of the P-wave velocity anomalies in the shallow upper crust is closely related to the surface geological structure, terrain and lithology. Baoxing and Kangding, with their basic volcanic rocks and volcanic clastic rocks, present obvious high-velocity anomalies. The Chengdu Basin shows low-velocity anomalies associated with the Quaternary sediments. The Xichang Mesozoic Basin and the Butuo Basin are characterised by lowvelocity anomalies related to very thick sedimentary layers. The upper and middle crust beneath the Chuan–Dian and Songpan–Ganzi Blocks has apparent lateral heterogeneities, including low-velocity zones of different sizes. There is a large range of low-velocity layers in the Songpan–Ganzi Block and the sub–block northwest of Sichuan Province, showing that the middle and lower crust is relatively weak. The Sichuan Basin, which is located in the western margin of the Yangtze platform, shows high-velocity characteristics. The results also reveal that there are continuous low-velocity layer distributions in the middle and lower crust of the Daliangshan Block and that the distribution direction of the low-velocity anomaly is nearly SN, which is consistent with the trend of the Daliangshan fault. The existence of the low-velocity layer in the crust also provides a deep source for the deep dynamic deformation and seismic activity of the Daliangshan Block and its boundary faults. The results of the 3D P-wave velocity structure show that an anomalous distribution of high-density, strong-magnetic and high-wave velocity exists inside the crust in the Panxi region. This is likely related to late Paleozoic mantle plume activity that led to a large number of mafic and ultra-mafic intrusions into the crust. In the crustal doming process, the massive intrusion of mantle-derived material enhanced the mechanical strength of the crustal medium. The P-wave velocity structure also revealed that the upper mantle contains a low-velocity layer at a depth of 80–120 km in the Panxi region. The existence of deep faults in the Panxi region, which provide conditions for transporting mantle thermal material into the crust, is the deep tectonic background forthe area's strong earthquake activity.  相似文献   

7.
The crustal and upper mantle compressional-wave velocity structure across the southwestern Arabian Shield has been investigated by a 1000-km-long seismic refraction profile. The profile begins in Mesozoic cover rocks near Riyadh on the Arabian Platform, trends southwesterly across three major Precambrian tectonic provinces, traverses Cenozoic rocks of the coastal plain near Jizan, and terminates at the outer edge of the Farasan Bank in the southern Red Sea. More than 500 surveyed recording sites were occupied, and six shot points were used, including one in the Red Sea.Two-dimensional ray-tracing techniques, used to analyze amplitude-normalized record sections indicate that the Arabian Shield is composed, to first order, of two layers, each about 20 km thick, with average velocities of about 6.3 km/s and 7.0 km/s, respectively. West of the Shield-Red Sea margin, the crust thins to a total thickness of less than 20 km, beyond which the Red Sea shelf and coastal plain are interpreted to be underlain by oceanic crust.A major crustal inhomogeneity at the northeast end of the profile probably represents the suture zone between two crustal blocks of different composition. Elsewhere along the profile, several high-velocity anomalies in the upper crust correlate with mapped gneiss domes, the most prominent of which is the Khamis Mushayt gneiss. Based on their velocities, these domes may constitute areas where lower crustal rocks have been raised some 20 km. Two intracrustal reflectors in the center of the Shield at 13 km depth probably represent the tops of mafic intrusives.The Mohorovičić discontinuity beneath the Shield varies from a depth of 43 km and mantle velocity of 8.2 km/s in the northeast to a depth of 38 km and mantle velocity of 8.0 km/s depth in the southwest near the Shield-Red Sea transition. Two velocity discontinuities occur in the upper mantle, at 59 and 70 km depth.The crustal and upper mantle velocity structure of the Arabian Shield is interpreted as revealing a complex crust derived from the suturing of island arcs in the Precarnbrian. The Shield is currently flanked by the active spreading boundary in the Red Sea.  相似文献   

8.
The heterogeneous upper mantle low velocity zone   总被引：2，自引：1，他引：2  
The upper mantle low velocity zone (LVZ) is a depth interval with slightly reduced seismic velocity compared to the surrounding depth intervals. The zone is present below a relatively constant depth of 100 km in most continental parts of the world, both in cratonic areas with high average velocity and tectonically active areas with low average velocity. Evidence for the low velocity zone arises from controlled and natural source seismology, including studies of surface waves and of primary and multiple reflections of body waves from the bounding interfaces, calculations of receiver functions, and absolute velocity tomography. The available data indicates a more pronounced reduction in seismic velocity and Q-value for S-waves than P-waves as well as high electrical conductivity in the LVZ. Seismic waves are strongly scattered by the zone, which demonstrates the existence of small-scale heterogeneity. The depth to the base of the LVZ is systematically shallower in cold, stable cratonic areas than in hot, active regions of the world. Because of its global occurrence below a relative constant depth of 100 km, the LVZ cannot be explained by metamorphic or compositional variation and rheological changes. Calculated upper mantle temperatures indicate that the rocks are close to the solidus in an interval with variable thickness below 100 km depth, provided that the rocks contain water and carbon dioxide. The presence of, even small amounts of such fluids in the mantle rocks will lower the solidus by several hundred degrees and introduce a characteristic kink on the solidus curve around 80–100 km depth. The seismic velocities and Q-values are significantly reduced of rocks, which are close to the solidus or contain small amounts of partial melt. Hence, the LVZ may be explained by upper mantle temperatures being close to the solidus in a depth interval below 100 km. Assuming that the rocks contain only limited amounts of fluids, this mechanism may explain the low velocities, Q-values, and resistivity, as well as the intrinsic scattering, and the characteristic variation in thickness of the low velocity zone.  相似文献   

9.
The Japan Trench is a plate convergent zone where the Pacific Plate is subducting below the Japanese islands. Many earthquakes occur associated with plate convergence, and the hypocenter distribution is variable along the Japan Trench. In order to investigate the detailed structure in the southern Japan Trench and to understand the variation of seismicity around the Japan Trench, a wide-angle seismic survey was conducted in the southern Japan Trench fore-arc region in 1998. Ocean bottom seismometers (15) were deployed on two seismic lines: one parallel to the trench axis and one perpendicular. Velocity structures along two seismic lines were determined by velocity modeling of travel time ray-tracing method. Results from the experiment show that the island arc Moho is 18–20 km in depth and consists of four layers: Tertiary and Cretaceous sedimentary rocks, island arc upper and lower crust. The uppermost mantle of the island arc (mantle wedge) extends to 110 km landward of the trench axis. The P-wave velocity of the mantle wedge is laterally heterogeneous: 7.4 km/s at the tip of the mantle wedge and 7.9 km/s below the coastline. An interplate layer is constrained in the subducting oceanic crust. The thickness of the interplate layer is about 1 km for a velocity of 4 km/s. Interplate layer at the plate boundary may cause weak interplate coupling and low seismicity near the trench axis. Low P-wave velocity mantle wedge is also consistent with weak interplate coupling. Thick interplate layer and heterogeneous P-wave velocity of mantle wedge may be associated with the variation of seismic activity.  相似文献   

10.
Results of geologic and geophysical modeling are presented, based on detailed seismic studies along two profiles—Pechenga-Kostomuksha and Lieksa-Lovisa. Density, geothermal, magnetic, and geoelectric models were obtained from the interpretations of various geophysical fields and correlated with the reference seismic sections. All the models were combined in order to compile a geologic-geophysical crustal section. The crustal thickness along the Pechenga-Kostomuksha-Lovisa geotraverse varies from 38 to 65 km. Two anomalous structures have been observed that are referred to as the Belomorian-Karelian and Ladoga-Bothnian zones. These zones are characterized by enhanced values of magnetic fields, presence of seismic foci and wave attenuation, and variation of the depth and magnitude of modern crustal movements. These zones are distinguished by the discontinuity M reconstruction, an increase in transitional layer thickness (to 25 km) at the base of the crust, and an increase in depth down to the discontinuity M (50 to 65 km). On average, the crust is thinner (40 km) in the ancient part of the shield than in the younger Svecofennian province (45 km). The velocity differences also are important: for example, the crust of the ancient shield is characterized by lower velocities and the transitional high-velocity layer is absent or thinner. The Karelian granite-greenstone area (a fragment of the Archean craton) has the most simple and balanced deep structure. Within the Karelian area, the layers are nearly horizontal and their thickness is rather constant. The northeastern part of a fragment of the Murmansk block has similar crustal characteristics within the Kola area, where it has undergone Early Proterozoic deformation. Geological and geophysical data for the Pechenga-Varzuga zone suggests that there was intracontinental rifting and a subsequent construction regime during the Svecofennian orogeny that involved a considerable part of the shield. The deep-crustal structure is more complicated to the south. An increase in volume of material with the properties of granulites and basic rocks is observed in the upper crust. The rocks form an inclined alternation of high-density and high-velocity plates and lenses. The packet of tectonic clustering of supracrustal rocks is most conspicuous in the Lapland-Kolvitsa granulite belt. The packet thickness does not exceed 13 km.  相似文献   

11.
1.IntroductionTheManzhouli-SuifenheGeoscienceTransect(M-SGT)isinthenortheastChina,acrosstheprovincesofInnerMongoliaandHeilongiiang.Geologically,itissitllatedamongtheplatesofNorthChina,SiberiaandWesternPacific.ThewholeIengthoftheM-SGTisaboutl3Ookm,whichcrossesmanytectonicunits(Fig.l).ItisclearthatitstectonicsitUationisuniqueanditsgeologicstructUreiscomplex.Deepearthquakeshappenfrequentlya1ongthetransect.Therefore,itisarepresentativeprofileofnortheastChinaandtheNortheastAsia.TheM-S…  相似文献   

12.
In this study, we present an interpretation of seismic refraction profiles from the PISCO 94 experiment in northern Chile. As the PISCO experiment was a combined active and passive seismological study, we also discuss results of the passive part in the context of the seismic refraction model. Previous seismic refraction and gravimetric studies indicate a maximum crustal thickness of about 70 km beneath the Pre- and Western Cordillera. The new seismic refraction data lead to a differentiated image of the Andean crust which shows strong varying characteristics. The crustal discontinuities (up to five are detected) dip from W to E. The upper crust has a thickness of 18 km (Precordillera) to 23 km (magmatic arc) underlain by the recent middle crust down to 35–45 km where the velocity increases to about 7 km/s at its base. This crustal level is interpreted as old continental lower crust and its base as blurred continental (paleo) Moho. Beneath the Precordillera, a strong discontinuity at 70 km depth with a velocity increase to about 8 km/s was detected, interpreted as the recent geophysical Moho. For the magmatic arc, this deep discontinuity could not be found by active seismic measurements. The tomographic models of the seismological studies, in general, confirm the seismic refraction results. Anomalously high vp/vs ratios in the deeper part of the forearc indicate a hydrated mantle wedge consisting of serpentine and amphibole-bearing peridotite and the 70 km discontinuity is interpreted as the boundary between these two different stages of the hydrated mantle wedge. A zone of high attenuation (Qp) and high vp/vs ratios beneath the magmatic arc coincides with the low velocity zones and indicates partially molten rocks from a depth of 20 km down to the asthenospheric wedge.  相似文献   

13.
The VRANCEA99 seismic refraction experiment is part of an international and multidisciplinary project to study the intermediate depth earthquakes of the Eastern Carpathians in Romania. As part of the seismic experiment, a 300-km-long refraction profile was recorded between the cities of Bacau and Bucharest, traversing the Vrancea epicentral region in NNE–SSW direction.

The results deduced using forward and inverse ray trace modelling indicate a multi-layered crust. The sedimentary succession comprises two to four seismic layers of variable thickness and with velocities ranging from 2.0 to 5.8 km/s. The seismic basement coincides with a velocity step up to 5.9 km/s. Velocities in the upper crystalline crust are 5.9–6.2 km/s. An intra-crustal discontinuity at 18–31 km divides the crust into an upper and a lower layer. Velocities within the lower crust are 6.7–7.0 km/s. Strong wide-angle PmP reflections indicate the existence of a first-order Moho at a depth of 30 km near the southern end of the line and 41 km near the centre. Constraints on upper mantle seismic velocities (7.9 km/s) are provided by Pn arrival times from two shot points only. Within the upper mantle a low velocity zone is interpreted. Travel times of a PLP reflection define the bottom of this low velocity layer at a depth of 55 km. The velocity beneath this interface must be at least 8.5 km/s.

Geologic interpretation of the seismic data suggests that the Neogene tectonic convergence of the Eastern Carpathians resulted in thin-skinned shortening of the sedimentary cover and in thick-skinned shortening in the crystalline crust. On the autochthonous cover of the Moesian platform several blocks can be recognised which are characterised by different lithological compositions. This could indicate a pre-structuring of the platform at Mesozoic and/or Palaeozoic times with a probable active involvement of the Intramoesian and the Capidava–Ovidiu faults. Especially the Intramoesian fault is clearly recognisable on the refraction line. No clear indications of the important Trotus fault in the north of the profile could be found. In the central part of the seismic line a thinned lower crust and the low velocity zone in the uppermost mantle point to the possibility of crustal delamination and partial melting in the upper mantle.  相似文献   


14.
利用长江中下游成矿带多学科深部探测剖面于2009年11月至2011年3月间采集的天然地震数据,通过天然地震接收函数成像等分析研究,得到了研究区地壳和上地幔结构的清晰图像。接收函数成像结果显示研究区内Moho面深度存在着明显的起伏变化,在长江中下游成矿带(指剖面穿过的长江中下游成矿带宁芜矿集区,下同)下方存在着"幔隆构造"。在剖面东南端(即扬子克拉通北缘),Moho面相对稳定,深度约为30km;在茅山和江南断裂附近,Moho面存在上下起伏现象;在剖面中部或宁芜矿集区下方,Moho面存在明显隆起,深度只有28km;在郯庐断裂带下方,Moho面明显加深,深度达到36km;进一步向北到华北地台南缘,Moho面深度逐渐恢复到了32km左右的平均深度水平。其次,我们在接收函数成像结果中发现,长江中下游成矿带与其周边下地壳结构存在着明显的差异,成矿带的下地壳具有显著的地震波方位各向异性。扬子克拉通北缘的下地壳呈高速的近水平状结构,地震波各向异性特征不明显;与此相比,长江中下游成矿带的下地壳虽然也呈近水平状结构特征,但是,对于沿成矿带走向方向传播的地震波,其下地壳具有高速特征,而对于垂直于成矿带走向方向上传播的地震波,其下地壳却又表现为低速特征,这意味着成矿带的下地壳存在着平行于成矿带走向(即近北东—南西)方向的地震波各向异性,我们解释其是下地壳熔融并沿成矿带走向水平流动导致矿物晶体定向排列的结果。最后,在郯庐断裂以西的华北地台南缘观测到一条从上地壳延伸到中下地壳的南南东向倾斜的转换震相,我们推测它可能是合肥盆地内地壳伸展构造的反映。此外,我们发现接收函数成像结果中观测到的"幔隆构造"与远震P波层析成像结果在成矿带下方150km深度上显示的上地幔低速异常(江国明等,另文发表)存在着良好的对应关系,我们解释它们是软流圈物质上涌的遗迹。综合天然地震接收函数成像、远震P波层析成像和前人关于岩浆岩等方面的研究成果,我们认为长江中下游成矿带现今的下地壳可能是中生代发生成矿作用的多级岩浆房系统的一部分,成矿带的形成可能是类似MASH过程的产物。首先,软流圈物质上涌导致了长江中下游成矿带及其周边拉张环境的形成,在其上部地壳中形成了一系列伸展构造;然后,软流圈物质通过底侵进入长江中下游成矿带的原下地壳并与原下地壳物质发生同化作用,形成类埃达克质岩浆;接着,类埃达克质岩浆沿着伸展、拆离构造上升到地壳浅部形成不同层次的岩浆房和侵入岩体,并与围岩作用形成矿床。  相似文献   

15.
Laboratory samples from the upper oceanic crust (tholeiitic basalt flows) that have not been significantly weathered, hydrothermally altered or fractured have a typical Poisson's ratio of 0.30 ( ) and a compressional velocity of 6.0 km s−1; from the middle crust (dolerite sheeted dykes) a ratio of 0.28 ( ) and a velocity of 6.7 km s−1; from the lower crust (gabbro) a ratio of 0.31 ( ) and a velocity of 7.1 km s−1; and from the uppermost mantle a ratio of 0.24 ( ) and a velocity of 8.4 km s−1. These sample values are representative of the large scale insitu values for the middle and lower crust and for the upper mantle. The upper crust is modified by several processes that decrease the velocity and generally increase Poisson's ratio: (1) the formation of an irregular layer of low temperature weathering generally less than 50 m thick; (2) large scale porosity in the form of drained pillows and lava tubes, of talus and rubble and of large open fractures; (3) where there was a high sedimentation rate over the ridge that formed the crust, hydrothermal alteration and intercalation of basalt and sediments. The Poisson's ratios of both high velocity sediments and of crystalline continental crustal rocks generally are significantly lower than the ratios of oceanic crustal rocks of similar compressional wave velocity. Thus, the use of shear wave velocities should permit the separation of these different formations which frequently cannot be distinguished on the basis of compressional wave seismic refraction data alone.  相似文献   

16.
We present seismic images of the mantle beneath East Russia and adjacent regions and discuss geodynamic implications. Our mantle tomography shows that the subducting Pacific slab becomes stagnant in the mantle transition zone under Western Alaska, Bering Sea, Sea of Okhotsk, Japan Sea, and Northeast Asia. Many intraplate volcanoes exist in these areas, which are located above the low-velocity zones in the upper mantle above the stagnant slab, suggesting that the intraplate volcanoes are related to the dynamic processes in the big mantle wedge above the stagnant slab and the deep slab dehydration. Teleseismic tomography revealed a low-velocity zone extending down to 660 km depth beneath the Baikal rift zone, which may represent a mantle plume. The bottom depths of the Wadati–Benioff deep seismic zone and the Pacific slab itself become shallower toward the north under Kamchatka Peninsula, and the slab disappears under the northernmost Kamchatka. The slab loss is considered to be caused by the friction between the slab and the surrounding asthenosphere as the Pacific plate rotated clockwise at about 30 Ma ago, and then the slab loss was enlarged by the slab-edge pinch-off by the hot asthenospheric flow and the presence of Meiji seamounts.  相似文献   

17.
Seismic reflection and refraction data were collected west of New Zealand's South Island parallel to the Pacific–Australian Plate boundary. The obliquely convergent plate boundary is marked at the surface by the Alpine Fault, which juxtaposes continental crust of each plate. The data are used to study the crustal and uppermost mantle structure and provide a link between other seismic transects which cross the plate boundary. Arrival times of wide-angle reflected and refracted events from 13 recording stations are used to construct a 380-km long crustal velocity model. The model shows that, beneath a 2–4-km thick sedimentary veneer, the crust consists of two layers. The upper layer velocities increase from 5.4–5.9 km/s at the top of the layer to 6.3 km/s at the base of the layer. The base of the layer is mainly about 20 km deep but deepens to 25 km at its southern end. The lower layer velocities range from 6.3 to 7.1 km/s, and are commonly around 6.5 km/s at the top of the layer and 6.7 km/s at the base. Beneath the lower layer, the model has velocities of 8.2–8.5 km/s, typical of mantle material. The Mohorovicic discontinuity (Moho) therefore lies at the base of the second layer. It is at a depth of around 30 km but shallows over the south–central third of the profile to about 26 km, possibly associated with a southwest dipping detachment fault. The high, variable sub-Moho velocities of 8.2 km/s to 8.5 km/s are inferred to result from strong upper mantle anisotropy. Multichannel seismic reflection data cover about 220 km of the southern part of the modelled section. Beneath the well-layered Oligocene to recent sedimentary section, the crustal section is broadly divided into two zones, which correspond to the two layers of the velocity model. The upper layer (down to about 7–9 s two-way travel time) has few reflections. The lower layer (down to about 11 s two-way time) contains many strong, subparallel reflections. The base of this reflective zone is the Moho. Bi-vergent dipping reflective zones within this lower crustal layer are interpreted as interwedging structures common in areas of crustal shortening. These structures and the strong northeast dipping reflections beneath the Moho towards the north end of the (MCS) line are interpreted to be caused by Paleozoic north-dipping subduction and terrane collision at the margin of Gondwana. Deeper mantle reflections with variable dip are observed on the wide-angle gathers. Travel-time modelling of these events by ray-tracing through the established velocity model indicates depths of 50–110 km for these events. They show little coherence in dip and may be caused side-swipe from the adjacent crustal root under the Southern Alps or from the upper mantle density anomalies inferred from teleseismic data under the crustal root.  相似文献   

18.
We study high-resolution three-dimensional P-wave velocity (Vp) tomography and anisotropic structure of the crust and uppermost mantle under the Helan–Liupan–Ordos western margin tectonic belt in North-Central China using 13,506 high-quality P-wave arrival times from 2666 local earthquakes recorded by 87 seismic stations during 1980–2008. Our results show that prominent low-velocity (low-V) anomalies exist widely in the lower crust beneath the study region and the low-V zones extend to the uppermost mantle in some local areas, suggesting that the lower crust contains higher-temperature materials and fluids. The major fault zones, especially the large boundary faults of major tectonic units, are located at the edge portion of the low-V anomalies or transition zones between the low-V and high-V anomalies in the upper crust, whereas low-V anomalies are revealed in the lower crust under most of the faults. Most of large historical earthquakes are located in the boundary zones where P-wave velocity changes drastically in a short distance. Beneath the source zones of most of the large historical earthquakes, prominent low-V anomalies are visible in the lower crust. Significant P-wave azimuthal anisotropy is revealed in the study region, and the pattern of anisotropy in the upper crust is consistent with the surface geologic features. In the lower crust and uppermost mantle, the predominant fast velocity direction (FVD) is NNE–SSW under the Yinchuan Graben and NWW–SEE or NW–SE beneath the Corridor transitional zone, Qilian Orogenic Belt and Western Qinling Orogenic Belt, and the FVD is NE–SW under the eastern Qilian Orogenic Belt. The anisotropy in the lower crust may be caused by the lattice-preferred orientation of minerals, which may reflect the lower-crustal ductile flow with varied directions. The present results shed new light on the seismotectonics and geodynamic processes of the Qinghai–Tibetan Plateau and its northeastern margin.  相似文献   

19.
We construct fine-scale 3D P- and S-wave velocity structures of the crust and upper mantle beneath the whole Japan Islands with a unified resolution, where the Pacific (PAC) and Philippine Sea (PHS) plates subduct beneath the Eurasian (EUR) plate. We can detect the low-velocity (low-V) oceanic crust of the PAC and PHS plates at their uppermost part beneath almost all the Japan Islands. The depth limit of the imaged oceanic crust varies with the regions. High-VP/VS zones are widely distributed in the lower crust especially beneath the volcanic front, and the high strain rate zones are located at the edge of the extremely high-VP/VS zone; however, VP/VS at the top of the mantle wedge is not so high. Beneath northern Japan, we can image the high-V subducting PAC plate using the tomographic method without any assumption of velocity discontinuities. We also imaged the heterogeneous structure in the PAC plate, such as the low-V zone considered as the old seamount or the highly seismic zone within the double seismic zone where the seismic fault ruptured by the earthquake connects the upper and lower layer of the double seismic zone. Beneath central Japan, thrust-type small repeating earthquakes occur at the boundary between the EUR and PHS plates and are located at the upper part of the low-V layer that is considered to be the oceanic crust of the PHS plate. In addition to the low-V oceanic crust, the subducting high-V PAC plate is clearly imaged to depths of approximately 250 km and the subducting high-V PHS zone to depths of approximately 180 km is considered to be the PHS plate. Beneath southwestern Japan, the iso-depth lines of the Moho discontinuity in the PHS plate derived by the receiver function method divide the upper low-V layer and lower high-V layer of our model at depths of 30–50 km. Beneath Kyushu, the steeply subducting PHS plate is clearly imaged to depths of approximately 250 km with high velocities. The high-VP/VS zone is considered as the lower crust of the EUR plate or the oceanic crust of the PHS plate at depths of 25–35 km and the partially serpentinized mantle wedge of the EUR plate at depths of 30–45 km beneath southwestern Japan. The deep low-frequency nonvolcanic tremors occur at all parts of the high-VP/VS zone—within the zone, the seaward side, and the landward side where the PHS plate encounters the mantle wedge of the EUR plate. We prove that we can objectively obtain the fine-scale 3D structure with simple constraints such as only 1D initial velocity model with no velocity discontinuity.  相似文献   

20.
We applied a tomographic method to image an aseismic strike–slip fault in North Morocco and found that the occurrence of earthquakes is not only controlled by the state of tectonic stress but also by material heterogeneity in the crust. We have constructed an integrated model of seismic, electric, magnetic and heat flow properties across northeastern Morocco primarily based on a tomography inversion of local earthquake arrival times. The seismic images obtained show a pronounced low-velocity zone at 5 km depth parallels to the Nekor fault, coinciding with an anomalously high conductive and low gravity structure, which is interpreted as a fault gouge zone and/or a fluid-filled subsurface rock matrix. Below 10 km depth, a weak positive velocity zone indicates that the fault gouge is stable. The seismicity and the seismic velocity results for the Al-Hoceimas region show that the concentrations of earthquakes are confined in the high velocity area. This anomaly is interpreted to be a brittle and competent layer of the upper crust that sustains seismogenic stress. On the eastern coast line of Morocco, we infer that a high density, high velocity body exists in the shallowest layers of the upper crust, probably formed by Miocene volcanic rocks.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号