首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 906 毫秒
1.
Summary The disturbances of the velocity and magnetic fields close to the Earth's core-mantle boundary, caused by sudden irregular changes in the Earth's rotation, are investigated. The problem leads to the investigation of the structure of the Ekman-Hartman hydromagnetic boundary layer, the magnetic diffusive region and the currentless region. Precise Laplacean inversions of the images of all disturbances in the Earth's core-mantle system are obtained for the limiting case of a zero magnetic Prandtl number, =0. The disturbance of the velocity in the direction of the axis of rotation (Ekman suction) in the currentless region has the nature of inertial oscillations with a frequency of 2. Additional disturbances (with respect to the case of =0) of the velocity in the azimuthal and radial directions, particularly for the EHL and MDR region, are determined for the case when 0< « 1. The disturbance in the velocity again has the character of inertial oscillations with the frequency 2, being exponentially damped in EHL asexp (–22t) and in MDR asexp (–2t).  相似文献   

2.
The truncation error for the harmonic EGM96 series has been investigated on the basis of 24 242 testing points covering about 70% of the Earth's surface. No degree n of harmonics retained was found at which the series becomes divergent. The EGM96 rms diminishes with increasing n. The truncation error due to EGM96 at the physical Earth's surface has no limiting consequences.  相似文献   

3.
Quantitative measurements of crystal size distributions (CSDs) have been used to obtain kinetic information on crystallization of industrial compounds (Randolph and Larson 1971) and more recently on Hawaiian basalts (Cashman and Marsh 1988). The technique is based on a population balance resulting in a differential equation relating the population densityn of crystals to crystal sizeL, i.e., at steady staten =n o exp(–L/itG), wheren o is nucleation density,G is the average crystal growth rate, is the average growth time, and the nucleation rateJ =n o G. CSD (Inn vsL) plots of plagioclase phenocrysts in 12 samples of Mount St. Helens blast dacite and 14 samples of dacite from the 1980–1986 Mount St. Helens dome are similar and averageG = 9.6 (± 1.1) × 10–3 cm andn o = 1–2 × 106 cm–4. Reproducibility of the measurements was tested by measuring CSDs of 12 sections cut from a single sample in three mutually perpendicular directions; precision of the size distributions is good in terms of relative, but not necessarily absolute values (± 10%). Growth and nucleation rates for plagioclase have been calculated from these measurements using time brackets of = 30–150 years; growth ratesG are 3–10 × 10–12cm/s, and nucleation ratesJ are 5–21 × 10–6/cm3 s.G andJ for Fe-Ti oxides calculated from CSD data areG = 2–13 ± 10–13 cm/sec andJ = 7–33 × 10–5/cm3 s, respectively. The higher nucleation rate and lower growth rate of oxides resulted in a smaller average crystal size than for plagioclase. Sizes of plagioclase microlites (<0.01 mm) in the blast dacite groundmass have been measured from backscatter SEM photographs. Nucleation of these microlites was probably triggered by intrusion of material into the cone of Mount St. Helens in spring 1980. This residence time of 52 days gives minimum crystallization estimates ofG = 1–3 × 10–11 cm/s andJ = 9–16 × 1O3/cm3 s. The skeletal form of the microlites provides evidence for nucleation and growth at high values of undercooling (T) relative to the phenocrysts. A comparison of nucleation and growth rates for the two crystal populations (phenocrysts vs microlites) suggests that while growth rate seems to be only slightly affected by changes inT, nucleation rate is a very strong function of undercooling. A comparison of plagioclase nucleation and growth rates measured in the Mount St. Helens dacite and in basalt from Makaopuhi lava lake in Hawaii suggests that plagioclase nucleation rates are not as dependent on composition. Groundmass textures suggest that plagioclase microphenocrysts crystallized at depth rather than in the conduit, in the dome, or after extrusion onto the surface. Most of this crystallization appears to be in the form of crystal growth (coarsening) of groundmass microphenocrysts at small degrees of undercooling rather than extensive nucleation of new crystals. This continuous crystallization in a shallow magmatic reservoir may provide the overpressurization needed to drive the continuing periodic domebuilding extrusions, which have been the pattern of activity at Mount St. Helens since December 1980.  相似文献   

4.
Summary The estimate of the tidal long-term decrease in the angular velocity of the Earth's rotation due to the Sun is given as –(0.8±0.3)×10 –22 rad s –2. It was computed on the basis of the observed total long-term decrease in , of the observed tidal deceleration of the Moon and the observed decrease in the second-degree zonal Stokes geopotential harmonic term. Adopting the estimate given, the product of the Love number and the tidal phase lag angle due to the Sun (in degrees) comes out as 0.53±0.20.
am a z nuuu u z mu au u, az : –(0,8±0,3) 10 –22 a¶rt; –2 . ¶rt; ua n a¶rt;a u , n a¶rt;a nuu u ¶rt;z ¶rt;uu u n a¶rt;a u mz az znmuaz naama ma. u num n au, m nu¶rt;u ua a a z u ( za¶rt;a) a z nuua a (0,53±0,20).
  相似文献   

5.
Janle  P.  Meissner  R. 《Surveys in Geophysics》1986,8(2):107-186
Geo-scientific planetary research of the last 25 years has revealed the global structure and evolution of the terrestrial planets Moon, Mercury, Venus and Mars. The evolution of the terrestrial bodies involves a differentiation into heavy metallic cores, Fe-and Mg-rich silicate mantles and light Ca, Al-rich silicate crusts early in the history of the solar system. Magnetic measurements yield a weak dipole field for Mercury, a very weak field (and local anomalies) for the Moon and no measurable field for Venus and mars. Seismic studies of the Moon show a crust-mantle boundary at an average depth of 60 km for the front side, P- and S-wave velocities around 8 respectively 4.5 km s–1 in the mantle and a considerable S-wave attenuation below a depth of 1000 km. Satellite gravity permits the study of lateral density variations in the lithosphere. Additional contributions come from photogeology, orbital particle, x-and -ray measurements, radar and petrology.The cratered surfaces of the smaller bodies Moon and Mercury have been mainly shaped by meteorite impacts followed by a period of volcanic flows into the impact basins until about 3×109 yr before present. Mars in addition shows a more developed surface. Its northern half is dominated by subsidence and younger volcanic flows. It even shows a graben system (rift) in the equatorial region. Large channels and relics of permafrost attest the role of water for the erosional history. Venus, the most developed body except Earth, shows many indications of volcanism, grabens (rifts) and at least at northern latitudes collisional belts, i.e. mountain ranges, suggesting a limited plate tectonic process with a possible shallow subduction.List of Symbols and Abbreviations a=R e mean equatorial radius (km) - A(r, t) heat production by radioactive elements (W m–3) - A, B equatorial moments of inertia - b polar radius (km) - complex amplitude of bathymetry in the wave number (K) domain (m) - C polar moment of inertia - C Fe moment of inertia of metallic core - C Si moment of inertia of silicate mantle - C p heat capacity at constant pressure (JK–1 mole–) - C nm,J nm,S nm harmonic coefficients of degreen and orderm - C/(MR e 2 ) factor of moment of inertia - d distance (km) - d nondimensional radius of disc load of elastic bending model - D diameter of crater (km) - D flexural rigidity (dyn cm) - E Young modulus (dyn cm–2) - E maximum strain energy - E energy loss during time interval t - f frequency (Hz) - f flattening - F magnetic field strength (Oe) (1 Oe=79.58A m–1) - g acceleration or gravity (cms–2) or (mGal) (1mGal=10–3cms–2) - mean acceleration - g e equatorial surface gravity - complex amplitude of gravity anomaly in the wave number (K) domain - g free air gravity anomaly (FAA) - g Bouguer gravity anomaly - g t gravity attraction of the topography - G gravitational constant,G=6.67×10–11 m3kg–1s–2 - GM planetocentric gravitational constant - h relation of centrifugal acceleration (2 R e ) to surface acceleration (g e ) at the equator - J magnetic flux density (magnetic field) (T) (1T=109 nT=109 =104G (Gauss)) - J 2 oblateness - J nm seeC nm - k (0) (zero) pressure bulk modulus (Pa) (Pascal, 1 Pa=1 Nm–2) - K wave number (km–1) - K * thermal conductivity (Jm–1s–1K–1) - L thickness of elastic lithosphere (km) - M mas of planet (kg) - M Fe mass of metallic core - M Si mass of silicate mantle - M(r) fractional mass of planet with fractional radiusr - m magnetic dipole moment (Am2) (1Am2=103Gcm3) - m b body wave magnitude - N crater frequency (km–2) - N(D) cumulative number of cumulative frequency of craters with diameters D - P pressure (Pa) (1Pa=1Nm–2=10–5 bar) - P z vertical (lithostatic) stress, see also z (Pa) - P n m (cos) Legendre polynomial - q surface load (dyn cm–2) - Q seismic quality factor, 2E/E - Q s ,Q p seismic quality factor derived from seismic S-and P-waves - R=R 0 mean radius of the planet (km) (2a+b)/3 - R e =a mean equatorial radius of the planet - r distance from the center of the planet (fractional radius) - r Fe radius of metallic core - S nm seeC nm - t time and age in a (years), d (days), h (hours), min (minutes), s (seconds) - T mean crustal thickness from Airy isostatic gravity models (km) - T temperature (°C or K) (0°C=273.15K) - T m solidus temperature - T sideral period of rotation in d (days), h (hours), min (minutes), s (seconds), =2/T - U external potential field of gravity of a planet - V volume of planet - V p ,V s compressional (P), shear (S) wave velocity, respectively (kms–1) - w deflection of lithosphere from elastic bending models (km) - z, Z depth (km) - z (K) admittance function (mGal m–1) - thermal expansion (°C–1) - viscosity (poise) (1 poise=1gcm–1s–1) - co-latitude (90°-) - longitude - Poisson ratio - density (g cm–3) - mean density - 0 zero pressure density - m , Si average density of silicate mantle (fluid interior) - average density of metallic core - t , top density of the topography - density difference between crustal and mantle material - electrical conductivity (–1 m–1) - r , radial and azimuthal surface stress of axisymmetric load (Pa) - z vertical (lithostatic) stress (seeP z ) - II second invariant of stress deviation tensor - latitude - angular velocity of a planet (=2/T) - ages in years (a), generally 0 years is present - B.P. before present - FAA Free Air Gravity Anomaly (see g - HFT High Frequency Teleseismic event - LTP Lunar Transient Phenomenon - LOS Line-Of-Sight - NRM Natural Remanent Magnetization Contribution No. 309, Institut für Geophysik der Universität, Kiel, F.R.G.  相似文献   

6.
Summary A non-linear model of trochoidal waves is presented which represents a geometrical and kinematical generalization of Gerstner's waves and of the results of[2–4].
¶rt;aam ¶rt; mu¶rt;a , ma m u ma u am[2–4] mu umuu u uamu mm ¶rt;u.
  相似文献   

7.
Summary A procedure is derived which enables the analytical continuation of a two-dimensional gravity field to be expressed in the form of an infinite series. For this purpose, an apparatus is used which represents the two-dimensional analogy of Bicadze-type integrals.
nuaa m¶rt;ua na aum aaumu n¶rt;u ¶rt;aumau n u¶rt; ¶rt;a. nm annaam n¶rt;mau ¶rt; aau uma muna ua¶rt;.
  相似文献   

8.
Summary The sequence of aurorae, observed at latitudes up to 55° between the years 1001 and 1900 was processed by methods of spectral analysis. The same methods were applied to parts of various duration of this interval. The periods predominant in the time series under investigation were determined. In all the selected parts of the interval, these periods are always located within the same frequency band. Their position is related to the periods corresponding to mutual conjunctions of the large planets.
¶rt; n uu, a¶rt;au a uma ¶rt; 55° nu¶rt; 1001–1900, ama nu nu m¶rt; nma aaua. a n¶rt; ¶rt; am a ¶rt;u m umaa. u n¶rt; na¶rt;au nu¶rt; u¶rt;a ¶rt;a. mu nu¶rt; ¶rt; a am umaa ¶rt;a a¶rt;m ¶rt;ua ¶rt;uaan amm. nu mum nu¶rt;au, mmmuu au u u nam.
  相似文献   

9.
Summary The algorithm of iterative geophysical tomography is presented. The medium is approximated smoothly by means of B-splines. The tww-point problem of ray computation is solved with the aid of paraxial approximation. The parameters of the medium are obtained from the iterative algorithm of minimizing the quadratic form. Two numerical 2-D examples are given.
u¶rt; au umamuuu mauu. ¶rt;a annuuaa n nu nu -na. ma na aa a nu nu naaua annuauu. aam ¶rt; n a umamu aua uuauauu a¶rt;amu . am nu¶rt; ¶rt;a 2-D u nua.
  相似文献   

10.
We estimate (/T) P of the lower mantle at seismic frequencies using two distinct approaches by combining ambient laboratory measurements on lower mantle minerals with seismic data. In the first approach, an upper bound is estimated for |(/T) P | by comparing the shear modulus () profile of PREM with laboratory room-temperature data of extrapolated to high pressures. The second approach employs a seismic tomography constraint ( lnV S / lnV P ) P =1.8–2, which directly relates (/T) P with (K S /T) P . An average (K S /T) P can be obtained by comparing the well-established room-temperature compression data for lower mantle minerals with theK S profile of PREM along several possible adiabats. Both (K S /T) and (/T) depend on silicon content [or (Mg+Fe)/Sil of the model. For various compositions, the two approaches predict rather distinct (/T) P vs. (K S /T) P curves, which intersect at a composition similar to pyrolite with (/T) P =–0.02 to –0.035 and (K S /T) P =–0.015 to –0.020 GPa/K. The pure perovskite model, on the other hand, yields grossly inconsistent results using the two approaches. We conclude that both vertical and lateral variations in seismic velocities are consistent with variation due to pressure, temperature, and phase transformations of a uniform composition. Additional physical properties of a pyrolite lower mantle are further predicted. Lateral temperature variations are predicted to be about 100–250 K, and the ratio of ( lnp/ lnV S ) P around 0.13 and 0.26. All of these parameters increase slightly with depth if the ratio of ( lnV S / lnV P ) P remains constant throughout the lower mantle. These predicted values are in excellent agreement with geodynamic analyses, in which the ratios ( ln / lnV S ) P and ( / lnV S ) P are free parameters arbitrarily adjusted to fit the tomography and geoid data.  相似文献   

11.
Radial velocity anomalies in the lower mantle that give rise to triplications in the travel-time curve for short-periodP waves will produce arrivals havingdT/d values that differe by roughly 0.2–0.5 s/deg. The first two arrivals associated with such triplications will be separated by less than one second over a distance range of 4°–10° they may not, therefore, be separable visually on single seismograms, so that their presence can only be inferred from some measurable property that depends on their mutual interference. If there are lateral variations in the regions of anomalous velocity gradients, the interfering signals will also have different azimuths of arrival. Using two synthetic wavelets we have investigated the effect of interference on bothdT/d and azimuth measurements at the Yellowknife Array. We found that if the interfering pulses have a dominant frequencyv, there is a range of time separations (0.30/v0.55/v) over which the measureddT/d and azimuth values may fluctuate by much more than the differences indT/d and azimuth between the interfering signals. We have evaluated the following empirically defined functions for three different primary signals, and for three different relative amplitudes of the interfering signals:f (t), the drift function, which expresses how the measured slownesses,p, and azimuths, , differ from the slownesses and azimuths of the primary wavelets; f(), the range function, which describes the behaviour of the upper and lower bounds ofp and as a function of the difference in arrival times of the signals, andf , studied the properties of these functions, and have outlined how these properties provide criteria based on the numerical and statistical characteristics of the arrival vectors, and on the waveform of the signal that will enable small radial velocity anomalies to be more clearly delineated.Contribution No. 863 from the Earth Physics Branch.  相似文献   

12.
Summary Computation of terrain corrections from a map with a square grid of mean height points
uu mnauu nna n am ¶rt;u m u¶rt; a¶rt;am mu m nm.
  相似文献   

13.
Summary Body wave magnitudes of 384 and 440 teleseismic events in the distance range 9–100° are determined using short-period P-wave data obtained from the vertical component seismograms of Khonsa (Tirap district, Arunachal Pradesh) and Yaongyimsen (Mokukchung district, Nagaland) seismic stations. These magnitudes are compared with the corresponding body wave magnitudes reported by the National Earthquake Information Service of the United States Geological Survey. Average residuals for Khonsa and Yaongyimsen stations are found to be +0.09 and +0.48, respectively. It is observed that the average residuals (7) for both the stations decrease with respect to epicentral distance (), focal depth (h) and body wave magnitude (mb). For the Khonsa station, the respective linear relations are: =0.12–1×10–5 , M=0.22–7××10–5 h, M=1.96–0.356mb and similarly, for the Yaongyimsen station the relations are M=0.59–2×10–5 , M=0.54–19×10–5 h, M=2.56–0.391mb. The nature of the variation of residuals is found to be nearly similar for both the stations.
aum¶rt; uu m 384 u 440 muu u a amuu 9° – 100° u n¶rt; n mua mau a mau hna (a irap, Arunachal Pradesh) u Yaongyimsen (a Mokukchung, Nagaland). aum¶rt; auam mmmuu aum¶rt;au, nu m National Earthquake Information Service of United States Geological Survey. ¶rt;u amu ¶rt; mau Khonsa u Yaongyimsen a +0,09 u +0,48 mmm. aa, ¶rt;u u (M) ¶rt; u mau am amu m numa (),u aa (h) u aum¶rt; (mb). mauu Khonsa mmmu u auumu ¶rt;u: M=0.12–1×10–5 , M=0,22–7×10–5 h, M=1,96–0,356mb; ¶rt; mauu Yaongyimsen mmm M=0,56–2×10–5 , M=0,54–19×10–5 h, M=2,56–0,391mb. m, m nu¶rt;a uu ¶rt; u mau nu ¶rt;uaa.
  相似文献   

14.
Simple models are discussed to evaluate reservoir lifetime and heat recovery factor in geothermal aquifers used for urban heating. By comparing various single well and doublet production schemes, it is shown that reinjection of heat depleted water greatly enhances heat recovery and reservoir lifetime, and can be optimized for maximum heat production. It is concluded that geothermal aquifer production should be unitized, as is already done in oil and gas reservoirs.Nomenclature a distance between doublets in multi-doublet patterns, meters - A area of aquifer at base temperature, m2 drainage area of individual doublets in multidoublet patterns, m2 - D distance between doublet wells, meters - h aquifer thickness, meters - H water head, meters - Q production rate, m3/sec. - r e aquifer radius, meters - r w well radius, meters - R g heat recovery factor, fraction - S water level drawdown, meters - t producing time, sec. - T aquifer transmissivity, m2/sec. - v stream-channel water velocity, m/sec. - actual temperature change, °C - theoretical temperature change, °C - water temperature, °C - heat conductivity, W/m/°C - r rock heat conductivity, W/m/°C - aCa aquifer heat capacity, J/m3/°C - aCr rock heat capacity, J/m3/°C - WCW water heat capacity, J/m3/°C - aquifer porosity, fraction  相似文献   

15.
Riassunto Fino ad oggi sono apparse solo teorie elettrogeosmotiche transitorie unidimensionali. Quì risolviamo un problema del genere bidimensionale, con elettrodi verticali cilindrici. Le curve rappresentative delle portate d'acqua catodicaq K a cui perveniamo, denotano diminuzioni abbastanza rapide fino ai tempi dell' ordine dei «tempi elettrodici », (t=), portate che poi diminuiscono in modo molto lento. Si riscontrano quì più estesi «pianerottoli»q K che non quelli delle monodimensionalità (t=/9). Inoltre, col crescere dei rapporti distanze eteropolari-raggi catodici, o col diminuire dei raggi catodici, tali portate (che si compongono dei contributi dei singoli anodi) s'incrementano nel modo diagrammato.
Summary Till now only mono-dimensional transient electro-geoosmotical theories have been published. In this paper a solution is given for a problem of bi-dimensional type, with vertical cylindrical electrodes. The plots which represent the amounts of cathodic waterq K show quite rapid lowerings as far as to reach time durations of the order of «electrodic times » (t=) volumes which, after, diminish very slowly. In this case more extendedq K «lobbies» are found than those in mono-dimensional case (t=/9). Furthermore increasing the ratios heteropolar spacings—cathodic radii, or diminishing the cathodic radii, water discharges (which result from the contribution of the single anods) increase as plotted in the diagrams.
  相似文献   

16.
Herpertz  E.  Israël  H.  Verzár  F. 《Pure and Applied Geophysics》1957,36(1):218-232
Zusammenfassung Es wird zum ersten Male ein Vergleich luftelektrischer Elemente in kernarmer Luft von etwa 50–1000 [KK/cm3] durchgeführt. Es zeigt sich, dass auch in diesem Bereich der Kernkonzentration die vereinfachte Wiedervereinigungsgleichung noch ihre Gültigkeit hat. Die Streuung der einzelnen Werte ist sehr gross. Die Gründe dieser Streuungen werden kurz erwähnt. Die Lösung der Wiedervereinigungsgleichung wird für den Fall kleiner Kernkonzentrationen in eine e-Funktion entwickelt. Eine genaue Aussage über den Absolutwert der Leifähigkeit kann auf Grund dieser Gleichung nicht gemacht werden. Diese Gleichung gibt über die Beziehung der Leitfähigkeitsänderung und der Kernzahländerungd/dZ=– Auskunft. Einige Tagesgänge der Monatsmittelwerte werden demonstriert.
Summary For the first time comparisons are made in an atmosphere with a small number of condensation nuclei, between the content of condensation nuclei and atmospheric electrical elements. The simplified equation for the recombination is valid in this range of nuclei content too. The dispersion of single values is very great. The causes for this dispersions are briefly mentioned. The solution of the equation of recombination is evolved into an exponential function for the case of small nuclei content. An exact statement for the absolute value of conductivity cannot be given on the basis of this equation. This equation provides information on the relations of variations of conductivity and numbers of nuclei:d/dZ=–. Some diurnal variations of the monthly means are demonstrated.
  相似文献   

17.
m amamu n¶rt;ma au ¶rt; nmuaa mu n ma a, ¶rt;a ¶rt;¶rt; maua mu n ¶rt; nmam ¶rt;um n¶rt; nnmmu n. u m umau n aa mau a, m m nmmu ma nu ¶rt;¶rt; n naa u umuu n. maa a¶rt;aa a u um ¶rt;uam. a u nu¶rt;m um ua u au, nu u n a auu mam, n¶rt;ma [5, 6]. m um nu num m amamu au ¶rt; nmuaa mu n, n¶rt;mau u¶rt; ¶rt;a nu a¶rt;a.  相似文献   

18.
Summary In adjusting measured values in sets A(r*), v(r*) and f(r*) by means of a power function in the form of P=Kr* a region of discontinuity of the approximating curves was found at the distance r*11.5 m kg –1/3. It is assumed that this discontinuity was caused by the varying character of the source of seismic waves. For scaled distances r*>11.5 m kg –1/3 the explosion was considered to be a spherical source from the point of view of the charge geometry and of the distance of the pick-up from the centre of the charge, whereas if r*<11.5 m kg –1/3 the explosion in the borehole had the character of a cylindrical source. The difference of the two types of sources was reflected in the exponent with both the functions A(r*) and v(r*), so that for r*>11.5 m kg –1/3 –4.0 and–2.4, and for r*<11.5 m kg –1/3 –2.5 and–1.5. For the same intervals of scaled distance in the set f(r*)1.4 and1.2.  相似文献   

19.
We analyzed the broadband body waves of the 1992 Nicaragua earthquake to determine the nature of rupture. The rupture propagation was represented by the distribution of point sources with moment-rate functions at 9 grid points with uniform spacing of 20 km along the fault strike. The moment-rate functions were then parameterized, and the parameters were determined with the least squares method with some constraints. The centroid times of the individual moment-rate functions indicate slow and smooth rupture propagation at a velocity of 1.5 km/s toward NW and 1.0 km/s toward SE. Including a small initial break which precedes the main rupture by about 10 s, we obtained a total source duration of 110 s. The total seismic moment isM o =3.4×1020 Nm, which is consistent with the value determined from long-period surface waves,M o =3.7×1020 Nm. The average rise time of dislocation is determined to be 10 s. The major moment release occurred along a fault length of 160 km. With the assumption of a fault widthW=50 km, we obtained the dislocationD=1.3 m. From andD the dislocation velocity isD=D/0.1 m/s, significantly smaller than the typical value for ordinary earthquakes. The stress drop =1.1 MPa is also less than the typical value for subduction zone earthquakes by a factor of 2–3. On the other hand, the apparent stress defined by 2E s /M o , where andE s are respectively the rigidity and the seismic wave energy, is 0.037 MPa, more than an order of magnitude smaller than . The Nicaragua tsunami earthquake is characterized by the following three properties: 1) slow rupture propagation; 2) smooth rupture; 3) slow dislocation motion.  相似文献   

20.
Zusammenfassung Es wird der Aufbau eines Rock Generators beschrieben. Die zylindrischen Proben haben einen Durchmesser von 4.2 cm und eine Länge von 3.6 cm. Die Drehzahl beträgt 7200 U/min, den Antrieb besorgt ein Elektromotor. Es können Magnetisierungen von 10–7 bis 10–2 gemessen werden. Für grössere Magnetisierungen als 2·10–6 beträgt der mittlere Messfehler an homogenen Proben etwa 0.5° für die Richtung und 3% für den Betrag. An inhomogen magnetisierten Proben können im ungünstigsten Fall Fehler von 6° bzw. 13% auftreten. Es werden auch die wichtigsten theoretischen Grundlagen eines Rock Generators diskutiert. Insbesondere wird eine Methode zur Berechnung der Messfehler entwickelt, die durch eine inhomogene Magnetisierung der Probe verursacht werden. Die Spulen werden unter Einhaltung gewisser Bedingungen für Durchmesser und Abstand für minimale Messfehler dimensioniert. Diese Spulen werden mit anderen Spulen mit Hilfe eines Nomogramms dimensioniert, das unter verschiedenen Nebenbedingungen für Durchmesser und Länge benutzbar ist. Schliesslich werden verschiedene Methoden zur Verminderung der Brummspannung diskutiert.
Summary The design of a rock generator is described. Cylindrical specimens of diameter 4.2 cm and length 3.6 cm are used. The apparatus is driven with a speed of 7200 r.p.m. by an electromotor. Magnetizations of 10–7 to 10–2 can be measured. For magnetizations stronger than 2·10–6 the mean error is less than 0.5° for direction and 3 percent for intensity when using homogeneous specimens, and 6° and 13 percent respectively with inhomogeneous specimens. The most important theoretical aspects of a rock generator are also discussed. Especially a method is developed for evaluating the errors due to an inhomogeneous magnetization. The coils are designed for minimum measuring errors while considering certain secondary conditions for diameter and distance. These coils are compared to other coils with maximum sensitivity. The latter are designed by means of a graph usable for a large range of secondary conditions for diameter and coil length. Finally different methods for reducing hum are discussed.
Résumé On décrit la construction d'un rock generator. Les échantillons de forme cylindrique ont un diamètre de 4.2 cm et une longueur de 3.6 cm. La vitesse de rotation est de 7200 tours/minute; l'appareil est actionné par un moteur électrique. On peut mesurer des aimantations rémanentes de 10–7 à 10–2. Pour des aimantations supérieures à 2·10–6, l'erreur moyenne est de 0.5° pour la direction et de 3% pour l'intensité, en utilisant des échantillons homogènes. Pour des échantillons inhomogènes, les erreurs peuvent atteindre 6° et 13% dans les cas les plus défavorables. On discute aussi les principes théoriques les plus importants sur lesquels est basée la construction du rock generator. En particulier, une méthode est développée qui permet de calculer les erreurs de mesure provenant d'une distribution inhomogène de l'aimantation des échantillons. Les dimensions des bobines, tout en tenant compte de certaines conditions supplémentaires pour le diamètre et l'espacement, sont fixées de manière à obtenir des erreurs minima. On compare ces bobines à d'autres bobines possédant un rapport maximum signal/bruit. Ces dernières sont dimensionnées à l'aide d'un graphique pouvant être utilisé sous différentes conditions supplémentaires pour le diamètre et la longueur. Enfin sont discutées différentes méthodes permettant de réduire le ronflement.

Dissertation Nr. 3960 Naturwissenschaften, Eidgenössische Technische Hochschule, Zürich, 1967.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号