共查询到20条相似文献，搜索用时 62 毫秒
1.
叠前逆时偏移在理论上是现行偏移方法中最为精确的一种成像方法,其实现过程中的核心步骤之一是波动方程的波场延拓,而波场延拓的本质是求解波动方程,所以精确、快速地求解波动方程对逆时偏移至关重要.本文采用一种基于时空域频散关系的有限差分方法来求解声波方程,分析其频散和稳定性,实现波场数值模拟,并将分析和模拟结果与传统有限差分法进行对比.分析结果和模型数值模拟结果都表明时空域有限差分法模拟精度更高、稳定性更好.将时空域高阶有限差分法应用到叠前逆时偏移波场延拓的方程求解中,然后再利用归一化互相关成像条件成像,理论模型数据偏移处理获得了精度更高的成像.同时,在逆时偏移波场延拓的实现中,采用自适应变长度的空间差分算子求解空间导数的有限差分策略,在不影响数值模拟和成像精度的前提下,有效地提高了计算效率. 相似文献
2.
Viscoacoustic prestack reverse time migration based on the optimal time-space domain high-order finite-difference method 总被引：3，自引：1，他引：2
Prestack reverse time migration （RTM） is an accurate imaging method ofsubsurface media. The viscoacoustic prestack RTM is of practical significance because itconsiders the viscosity of the subsurface media. One of the steps of RTM is solving thewave equation and extrapolating the wave field forward and backward; therefore, solvingaccurately and efficiently the wave equation affects the imaging results and the efficiencyof RTM. In this study, we use the optimal time-space domain dispersion high-order finite-difference （FD） method to solve the viscoacoustic wave equation. Dispersion analysis andnumerical simulations show that the optimal time-space domain FD method is more accurateand suppresses the numerical dispersion. We use hybrid absorbing boundary conditions tohandle the boundary reflection. We also use source-normalized cross-correlation imagingconditions for migration and apply Laplace filtering to remove the low-frequency noise.Numerical modeling suggests that the viscoacoustic wave equation RTM has higher imagingresolution than the acoustic wave equation RTM when the viscosity of the subsurface isconsidered. In addition, for the wave field extrapolation, we use the adaptive variable-lengthFD operator to calculate the spatial derivatives and improve the computational efficiencywithout compromising the accuracy of the numerical solution. 相似文献
3.
Reverse-time migration (RTM) is based on seismic numerical modeling algorithms, and the accuracy and efficiency of RTM strongly depend on the algorithm used for numerical solution of wave equations. Finite-difference (FD) methods have been widely used to solve the wave equation in seismic numerical modeling and RTM. In this paper, we derive a series of time–space domain staggered-grid FD coefficients for acoustic vertical transversely isotropic (VTI) equations, and adopt these difference coefficients to solve the equations, then analyze the numerical dispersion and stability, and compare the time–space domain staggered-grid FD method with the conventional method. The numerical analysis results demonstrate that the time–space domain staggered-grid FD method has greater accuracy and better stability than the conventional method under the same discretizations. Moreover, we implement the pre-stack acoustic VTI RTM by the conventional and time–space domain high-order staggered-grid FD methods, respectively. The migration results reveal that the time–space domain staggered-grid FD method can provide clearer and more accurate image with little influence on computational efficiency, and the new FD method can adopt a larger time step to reduce the computation time and preserve the imaging accuracy as well in RTM. Meanwhile, when considering the anisotropy in RTM for the VTI model, the imaging quality of the acoustic VTI RTM is better than that of the acoustic isotropic RTM. 相似文献
4.
与地面地震资料相比,VSP资料具有分辨率高、环境噪声小及能更好地反映井旁信息等优点.常规VSP偏移主要对上行反射波进行成像,存在照明度低、成像范围受限等问题.为了增加照明度、拓宽成像范围、提高成像精度,本文采用直达波除外的所有声波波场数据(全波),包括一次反射波、多次反射波等进行叠前逆时偏移成像.针对逆时偏移中的四个关键问题,即波场延拓、吸收边界条件、成像条件及低频噪声的压制,本文分别采用自适应变空间差分算子长度的优化有限差分方法(自适应优化有限差分方法)求解二维声波波动方程以实现高精度、高效率的波场延拓,采用混合吸收边界条件压制因计算区域有限所引起的人工边界反射,采用震源归一化零延迟互相关成像条件进行成像,采用拉普拉斯滤波方法压制逆时偏移中产生的低频噪声.本文对VSP模型数据的逆时偏移成像进行了分析,结果表明:自适应优化有限差分方法比传统有限差分方法具有更高的模拟精度与计算效率,适用于VSP逆时偏移成像;全波场VSP逆时偏移成像比上行波VSP逆时偏移的成像范围大、成像效果好;相对于反褶积成像条件,震源归一化零延迟互相关成像条件具有稳定性好、计算效率高等优点.将本文方法应用于某实际VSP资料的逆时偏移成像,进一步验证了本文方法的正确性和有效性. 相似文献
5.
Seismic imaging is an important step for imaging the subsurface structures of the Earth. One of the attractive domains for seismic imaging is explicit frequency–space (f – x) prestack depth migration. So far, this domain focused on migrating seismic data in acoustic media, but very little work assumed visco‐acoustic media. In reality, seismic exploration data amplitudes suffer from attenuation. To tackle the problem of attenuation, new operators are required, which compensates for it. We propose the weighted L 1 ‐error minimisation technique to design visco‐acoustic f – x wavefield extrapolators. The L 1 ‐error wavenumber responses provide superior extrapolator designs as compared with the previously designed equiripple L 4 ‐norm and L∞‐norm extrapolation wavenumber responses. To verify the new compensating designs, prestack depth migration is performed on the challenging Marmousi model dataset. A reference migrated section is obtained using non‐compensating f – x extrapolators on an acoustic dataset. Then, both compensating and non‐compensating extrapolators are applied to a visco‐acoustic dataset, and both migrated sections are then compared. The final images show that the proposed weighted L 1 ‐error method enhances the resolution and results in practically stable images. 相似文献
6.
Attenuation in seismic wave propagation is a common cause for poor illumination of subsurface structures. Attempts to compensate for amplitude loss in seismic images by amplifying the wavefield may boost high‐frequency components, such as noise, and create undesirable imaging artefacts. In this paper, rather than amplifying the wavefield directly, we develop a stable compensation operator using stable division. The operator relies on a constant‐Q wave equation with decoupled fractional Laplacians and compensates for the full attenuation phenomena by performing wave extrapolation twice. This leads to two new imaging conditions to compensate for attenuation in reverse‐time migration. A time‐dependent imaging condition is derived by applying Q‐compensation in the frequency domain, whereas a time‐independent imaging condition is formed in the image space by calculating image normalisation weights. We demonstrate the feasibility and robustness of the proposed methods using three synthetic examples. We found that the proposed methods are capable of properly compensating for attenuation without amplifying high‐frequency noise in the data. 相似文献
7.
叠前逆时偏移是目前成像精度最高的地震偏移方法之一,其实现过程中的一个重要步骤是数值求解全波方程,所以快速有效求解全波方程的数值算法对逆时偏移至关重要. 四阶近似解析辛可分Runge-Kutta (NSPRK) 方法是近年发展的一种具有高效率、高精度的数值求解波动方程的保辛差分方法, 能在粗网格条件下有效压制数值频散, 从而提高计算效率, 节省计算机内存需求量. 本文利用四阶NSPRK方法构造的基本思想,发展了具有六阶空间精度的NSPRK方法,并对新的六阶NSPRK方法进行了详细的稳定性和数值频散分析,以及计算效率比较和波场模拟. 同时将该方法用于声波叠前逆时偏移中, 得到一种时间上保辛、空间具有六阶精度、低数值频散、可应用大步长进行波场延拓并能长时计算的叠前逆时偏移方法,对Sigsbee2B模型进行了偏移成像, 并和四阶NSPRK方法、传统的六阶差分方法、四阶Lax-Wendroff correction (LWC) 方法进行了对比. 数值结果表明, 基于六阶NSPRK方法的叠前逆时偏移能得到更好的成像结果, 是一种优于四阶NSPRK方法、传统的六阶差分方法、四阶LWC叠前逆时偏移的方法, 尤其是在粗网格情况下具有更明显的优越性. 相似文献
8.
Source–receiver two‐way wave extrapolation for prestack exploding‐reflector modelling and migration 
下载免费PDF全文
下载免费PDF全文 Most modern seismic imaging methods separate input data into parts (shot gathers). We develop a formulation that is able to incorporate all available data at once while numerically propagating the recorded multidimensional wavefield forward or backward in time. This approach has the potential for generating accurate images free of artiefacts associated with conventional approaches. We derive novel high‐order partial differential equations in the source–receiver time domain. The fourth‐order nature of the extrapolation in time leads to four solutions, two of which correspond to the incoming and outgoing P‐waves and reduce to the zero‐offset exploding‐reflector solutions when the source coincides with the receiver. A challenge for implementing two‐way time extrapolation is an essential singularity for horizontally travelling waves. This singularity can be avoided by limiting the range of wavenumbers treated in a spectral‐based extrapolation. Using spectral methods based on the low‐rank approximation of the propagation symbol, we extrapolate only the desired solutions in an accurate and efficient manner with reduced dispersion artiefacts. Applications to synthetic data demonstrate the accuracy of the new prestack modelling and migration approach. 相似文献
9.
叠前深度偏移理论及方法一直是地震数据成像中研究的热点问题.业界对单程波叠前深度偏移方法和逆时深度偏移开展了深入的研究,但对双程波方程波场深度延拓理论及成像方法的研究还鲜有报道.本文以地表记录的波场值为基础,利用单程波传播算子估计波场对深度的偏导数,为在深度域求解双程波方程提供充分的边界条件,并提出利用矩阵分解理论实现双程波方程的波场深度外推.通过对强速度变化介质中传播波场的计算,与传统的单程波偏移方法相比,本文提出的偏移方法计算的波场与常规有限差分技术计算的波场相一致,证明了本方法计算的准确性.通过对SEAM模型的成像,在相同的成像参数下,与传统的单程波偏移算法和逆时深度偏移算法方法相比,本文提出的偏移方法能够提供更少的虚假成像和更清晰的成像结果.本文所提偏移算法具有深度偏移和双程波偏移的双重特色,推动和发展了双程波叠前深度偏移的理论和实践. 相似文献
10.
各向异性研究对地下介质精确成像有着重要的意义,在当前计算机硬件迅速发展及宽方位地震数据采集日益普遍的情况下,成像必须考虑介质的各向异性.逆时偏移是基于双程波动方程的较为精确的数值解的成像方法,所以相对于其他地震成像方法,它具有很大的优势,譬如不受反射界面的倾角限制、偏移速度结构合适时能够使回转波及多次波正确成像.在各向同性介质中,可使用标量波方程来模拟波场.而在各向异性介质中,P波和SV波是相互耦合的,即不存在单纯的标量波传播,通常利用能代表耦合波场中P波分量运动学特征的拟声波(qP波)进行偏移成像.本文中,我们推导出了TTI介质下qP波控制方程.该方程可采用显式有限差分格式进行求解.通过声学近似,若沿对称轴方向的剪切波速度为零,对于对称轴方向不变且ε≥δ的模型来说,可得到稳定的数值解.但对于TTI介质来说,由于沿对称轴方向各向异性参数是变化的,声学近似会引起波场传播及数值计算的不稳定.因此,我们提出了正则化有限横波的方法,很好地解决了这一问题.最后,给出了Foothill模型的测试结果及某探区实际资料试算结果,展示了采用这个方程进行复杂TTI模型正演和高质量逆时偏移成像结果,证实了该方法的正确性和实际资料应用中的有效性. 相似文献
11.
各向异性介质纯P波方程完全不受横波的干扰,在一定程度上可以减缓由于介质各向异性引起的数值不稳定,本文推导了具有垂直对称轴的横向各向同性(VTI)介质纯P波一阶速度-应力方程.由于纯P波方程存在一个分数形式的伪微分算子,无法直接采用有限差分法求解.针对该问题,本文采用伪谱法和高阶有限差分法联合求解波动方程,重点分析了混合法求解纯P波一阶速度-应力方程的稳定性问题,并给出了混合法求解纯P波方程的稳定性条件.数值模拟结果表明纯P波方程伪谱法和高阶有限差分混合法能够进行复杂介质的正演模拟,在强变速度、变密度的地球介质中仍然具有较好的稳定性. 相似文献
12.
常规的单程波波动方程偏移成像方法对大角度的高陡构造偏移成像存在内在的限制.根据波动方程在各个空间方向的数学特性和高陡构造反射地震波的传播特征,通过把地震波分解为垂向的上下行波、水平方向的前后行波和左右行波,提出基于波场垂向外推和水平方向外推相结合的单程波波动方程高陡构造偏移成像方法,即用波场垂向外推的单程波波动方程偏移成像方法解决中低角度平缓构造的偏移成像,用波场水平方向外推的单程波波动方程偏移成像方法解决中高角度陡倾构造的偏移成像.这种基于波场垂向和水平方向外推相结合的高陡构造偏移成像方法是常规单程波波动方程叠前深度偏移成像方法的补充和改进,它相对基于全波方程的逆时偏移具有计算效率上的优势. 相似文献
13.
O. HOLBERG 《Geophysical Prospecting》1988,36(2):99-114
Numerical wavefield extrapolation represents the backbone of any algorithm for depth migration pre- or post-stack. For such depth imaging techniques to yield reliable and interpretable results, the underlying wavefield extrapolation algorithm must propagate the waves through inhomogeneous media with a minimum of numerically induced distortion, over a range of frequencies and angles of propagation. A review of finite-difference (FD) approximations to the acoustic one-way wave equation in the space-frequency domain is presented. A straightforward generalization of the conventional FD formulation leads to an algorithm where the wavefield is continued downwards with space-variant symmetric convolutional operators. The operators can be precomputed and made accessible in tables such that the ratio between the temporal frequency and the local velocity is used to determine the correct operator at each grid point during the downward continuation. Convolutional operators are designed to fit the desired dispersion relation over a range of frequencies and angles of propagation such that the resulting numerical distortion is minimized. The optimization is constrained to ensure that evanescent energy and waves propagating at angles higher than the maximum design angle are attenuated in each extrapolation step. The resulting operators may be viewed as optimally truncated and bandlimited spatial versions of the familiar phase shift operator. They are unconditionally stable and can be applied explicitly. This results in a simple wave propagation algorithm, eminently suited for implementation on pipelined computers and on large parallel computing systems. 相似文献
14.
Reverse-time migration (RTM) directly solves the two-way wave equation for wavefield propagation; therefore, how to solve the wave equation accurately and quickly is very important for RTM. The conventional staggered-grid finite-difference (SFD) operators are usually based on the Taylor-series expansion theory. If they are used to solve wave equation on a larger frequency content, a strong dispersion will occur, which directly affects the seismic image quality. In this paper, we propose an optimal SFD operator based on least squares to solve acoustic wave equation for prestack RTM, and obtain a new antidispersion RTM algorithm that can use short spatial difference operators. The synthetic and real data tests demonstrate that the least squares SFD (LSSFD) operator can mitigate the numerical dispersion, and the acoustic RTM using the LSSFD operator can effectively improve image quality comparing with that using the Taylor-series expansion SFD (TESFD) operator. Moreover, the LSSFD method can adopt a shorter spatial difference operator to reduce the computing cost. 相似文献
15.
We present the chain of time‐reverse modeling, image space wavefield decomposition and several imaging conditions as a migration‐like algorithm called time‐reverse imaging. The algorithm locates subsurface sources in passive seismic data and diffractors in active data. We use elastic propagators to capitalize on the full waveforms available in multicomponent data, although an acoustic example is presented as well. For the elastic case, we perform wavefield decomposition in the image domain with spatial derivatives to calculate P and S potentials. To locate sources, the time axis is collapsed by extracting the zero‐lag of auto and cross‐correlations to return images in physical space. The impulse response of the algorithm is very dependent on acquisition geometry and needs to be evaluated with point sources before processing field data. Band‐limited data processed with these techniques image the radiation pattern of the source rather than just the location. We present several imaging conditions but we imagine others could be designed to investigate specific hypotheses concerning the nature of the source mechanism. We illustrate the flexible technique with synthetic 2D passive data examples and surface acquisition geometry specifically designed to investigate tremor type signals that are not easily identified or interpreted in the time domain. 相似文献
16.
逆时偏移成像(RTM)常用来处理复杂速度模型,包括陡倾角及横向速度变化剧烈的模型.与常规偏移成像方法(如Kirchhoff偏移)相比,逆时偏移成像能提供更好的偏移成像结果,近些年逆时偏移成像越来越广泛地应用到勘探地震中,它逐渐成为石油地震勘探中的一种行业标准.电磁波和弹性波在动力学和运动学上存在相似性,故本文开发了基于麦克斯韦方程组的电磁波逆时偏移成像算法,并将其应用到探地雷达数据处理中.时间域有限差分(FDTD)用于模拟电磁波正向和逆向传播过程,互相关成像条件用于获得最终偏移结果.逆时偏移成像算法中,偏移成像结果受初始模型影响较大,而其中决定电磁波传播速度的介电常数的影响尤为重要.本文基于时间域全波形反演(FWI)算法反演获得了更为精确的地下介电常数模型,并将其反演结果作为逆时偏移成像的初始介电常数模型.为了验证此算法的有效性,首先构建了一个复杂地质结构模型,合成了共偏移距及共炮点探地雷达数据,分别应用常规Kirchhoff偏移算法及逆时偏移成像算法进行偏移处理,成像结果显示由逆时偏移成像算法得到的偏移结果与实际模型具有较高的一致性;此外本文在室内沙槽中进行了相关的物理模拟实验,采集了共偏移距及共炮点探地雷达数据,分别应用Kirchhoff和叠前逆时偏移成像算法进行处理,结果表明叠前逆时偏移成像在实际应用中能获得更好的成像效果. 相似文献
17.
双程波方程逆时深度偏移是复杂介质高精度成像的有效技术,但其结果中通常包含成像方法引起的噪音和假象,一般的滤波方法会破坏成像剖面上的振幅,其中的假象也会给后续地质解释带来困扰.将波场进行方向分解然后实现入射波与反射波的相关成像能够有效地消除这类成像噪音,并提高逆时偏移成像质量.波传播方向的分解通常在频率波数域实现,它会占用大量的存储和计算资源,不便于在沿时间外推的逆时深度偏移中应用.本文提出解析时间波场外推方法,可以在时间外推的每个时间片上实现波传播方向的显式分解,逆时深度偏移中利用分解后的炮检波场进行对应的相关运算,实现成像噪音和成像信号的分离.在模型和实际数据上的测试表明,相比于常规互相关逆时偏移成像结果,本文方法能够有效地消除低频成像噪音和特殊地质构造导致的成像假象. 相似文献
18.
通常工业界实现逆时偏移算法时采用有限差分数值方法模拟地震波场,波场模拟常常受稳定性条件限制,且易产生数值频散,成像精度降低.本文引入了一步法波场延拓方法,首先构建声波传播算子,借助Chebyshev多项式和Jacobi-Anger展开式近似传播算子中的e指数项,进而实现波场递推,该方法时间步长的选取不受稳定性条件限制而且不存在空间频散现象.本文将一步法波场延拓方法用于逆时偏移成像的波场模拟,并提出双缓冲区存储策略,在不增加计算量的前提下,大幅降低了逆时偏移方法的波场存储量.波场模拟和逆时偏移成像测试表明,本文提出的一步法波场延拓方法模拟地震波场精度高,消除了频散影响,可在较大时间步长的情况下实现高精度波场模拟;提出的基于一步法波场延拓的逆时偏移方法成像质量好;基于双缓冲区存储策略的逆时偏移成像方法存储成本低. 相似文献
19.
Multiple scattering is usually ignored in migration algorithms, although it is a genuine part of the physical reflection response. When properly included, multiples can add to the illumination of the subsurface, although their crosstalk effects are removed. Therefore, we introduce full‐wavefield migration. It includes all multiples and transmission effects in deriving an image via an inversion approach. Since it tries to minimize the misfit between modeled and observed data, it may be considered a full waveform inversion process. However, full‐wavefield migration involves a forward modelling process that uses the estimated seismic image (i.e., the reflectivities) to generate the modelled full wavefield response, whereas a smooth migration velocity model can be used to describe the propagation effects. This separation of modelling in terms of scattering and propagation is not easily achievable when finite‐difference or finite‐element modelling is used. By this separation, a more linear inversion problem is obtained. Moreover, during the forward modelling, the wavefields are computed separately in the incident and scattered directions, which allows the implementation of various imaging conditions, such as imaging reflectors from below, and avoids low‐frequency image artefacts, such as typically observed during reverse‐time migration. The full wavefield modelling process also has the flexibility to image directly the total data (i.e., primaries and multiples together) or the primaries and the multiples separately. Based on various numerical data examples for the 2D and 3D cases, the advantages of this methodology are demonstrated. 相似文献
20.
Numerical implementation of the gradient of the cost function in a gradient‐based full‐ waveform inversion (FWI) is essentially a migration operator used in wave equation migration. In FWI, minimizing different data residual norms results in different weighting strategies of data residuals at receiver locations prior to back‐propagation into the medium. In this paper, we propose different scaling methods to the receiver wavefield and compare their performances. Using time‐domain reverse‐time migration (RTM), we show that compared to conventional algorithms, this type of scaling is able to significantly suppress non‐Gaussian noise, i.e., outliers. Our tests also show that scaling by its absolute norm produces better results than other approaches. 相似文献