共查询到20条相似文献，搜索用时 218 毫秒
1.
Summary The Delivery Tunnel North starts in Lesotho and continues into South Africa. It is divided into two sections by the Caledon and Little Caledon rivers. It runs through the mudrocks and sandstones of the Tarkastad Subgroup, and the Elliot and Molteno Formations. The tunnel was excavated by a double-shield tunnel boring machine, except for the sections beneath the two rivers, which were constructed by drill and blast methods. The tunnel boring machine was selected to bore through the anticipated changing ground conditions and also was capable of installing the segmental lining of the tunnel. Boreability tests showed that the sandstones and siltstones had good boreability, but that it was very low in the dolerite dykes. At depth, the weaker mudstones presented the worst tunnelling conditions, giving rise to squeezing ground and to shear failure with accompanying overbreak. Initially a small amount of cracking occurred in the tunnel lining but this was reduced significantly as experience was gained. Cracking was observed predominantly in the weaker rock types, and this was probably associated with overbreak. 相似文献
2.
Slake durability of rocks is a vital engineering geological property of rock materials that has an important role in the promotion of slope stability, evaluation of rock materials, as well as the estimation of stone degradability. This parameter is related to such factors as mineralogy, physical characteristics of rocks, and the environmental conditions. A major part of south and southwestern Iran embraces the Aghajari Formation whose sandstones are used to form the foundations for some structures in Khouzestan province where they are being extensively used as aggregate(s). In this paper, tests of mineralogical examinations, physical properties, and slake durability of sandstones from Ahwaz and Haftkel anticlines were administered in order to assess the durability and degradability of these rocks. The rock durability of each type was evaluated to be up to 15 cycles in acidic and alkaline watery environments and salt aqueous solutions. The results showed that durability of sandstones under study is related to their petrographical and physical characteristics. The durability index of the sandstone samples was decreased by pH reduction and by increasing the concentration of aqueous solutions. The durability index of Ahwaz samples, too, was decreased in basic solutions while this index increased for Haftkel sandstones with the increase in the pH of solutions. Also, the obtained results illustrated that durability index decreased with the increase in the number of cycles. Based on the results, all sandstones show that the durability in sodium sulfate solution is much lower than that for the sodium chloride. Moreover, the slake durability index of the sandstones is decreased with an increase in the concentration of aqueous solutions. As a final statement, the Ahwaz sandstones show lower resistance to weathering processes than Haftkel sandstones; therefore, the use of rocks as building stones is not recommended here. 相似文献
3.
Karl Gunnar Holter 《Rock Mechanics and Rock Engineering》2014,47(3):1003-1020
A composite tunnel lining system based on a sprayed waterproofing membrane combined with sprayed concrete is currently being considered for future Norwegian rail and road tunnels. Possible loading of the tunnel linings caused by water pressure is being investigated. This tunnel lining system consists of a waterproof membrane which, during application on the sprayed concrete lining, bonds mechanically to the sprayed concrete on either side. Hence, a continuous, sealing, and non-draining structure from the rock mass to the interior tunnel surface is formed in the walls and crown. Experiences from some successful recent projects with this lining system in Europe are reviewed. However, these experiences are not directly comparable to the Scandinavian hard rock tunnel lining approach, which utilizes a relatively thin sprayed and irregular concrete layer for permanent lining. When considering the sprayed membrane and sprayed concrete composite lining concept, introducing a partially sealing and undrained element in the lining, the experiences with the traditionally used lining systems in Norway need to be reconsidered and fully understood. A review of several hard rock tunnels with adverse conditions, in which the tunnel lining has been subject to load monitoring, shows that only very small loads in the tunnel linings occur. Recent investigations with in situ water pressure testing, including two sites with the composite sprayed membrane in a partially drained waterproof tunnel lining, are discussed. In a case with a cavern located in a hydraulically saturated rock mass subjected to approximately 8 bar hydrostatic pressure, a negative pressure gradient towards the tunnel lining has been measured. The investigation results from the Norwegian test sites indicate that no significant loading of the tunnel lining takes place in a hydraulically saturated rock when applying this composite waterproof tunnel lining in parts of the tunnel perimeter. 相似文献
4.
特殊的地理、气候条件及工程地质的复杂性决定了在北疆地区软岩地层中修建引水隧洞的设计施工难度较大。隧洞成拱效应与围岩自稳能力差,围岩渗透性强,遇水软化特性显著,极易产生软岩大变形甚至坍塌失稳灾害。为进一步研究北疆地区侏罗系与白垩系泥质砂岩的物理力学性质、遇水软化特性与能量损伤演化机制,开展了二者的单轴压缩、常规三轴与单轴蠕变试验。研究结果表明：两种岩石均富含黏土矿物,白垩系泥质砂岩的粒径分配更好,但其胶结程度较差,导致其强度稳定性与地层波速相对较低。低围压条件下,两者均以环向变形与体积扩容为主,但随着围压升高,其破坏模式由体积扩张过渡到体积压缩类型。高围压加载会造成岩石内部损伤,从而导致其抗压强度的降低。遇水后,两种岩石的延塑性与应变软化特性均明显增强,白垩系泥质砂岩的遇水软化特性更为显著。白垩系泥质砂岩的蠕变特性更为显著,两者的长期强度接近其单轴压缩损伤应力值。两种泥质砂岩的能量损伤演化过程均呈现S型变化规律,侏罗系泥质砂岩的能量硬化特性更为显著,白垩系泥质砂岩会更早地进入到能量硬化与能量软化阶段。 相似文献
5.
泡沫混凝土作为隧道减震材料在抵抗地震压剪荷载方面具有重要作用,为了研究减震层-衬砌接触面在地震压剪荷载作用下的破坏特征与剪应力演化规律,利用RMT-150C电液伺服试验机开展了二者接触面在不同法向应力下的直剪试验,获得了剪应力-剪切位移、峰值强度、残余强度、剪切刚度的变化规律及接触面的破坏特征和物态变化。根据有限元模拟结果,探究接触面上剪应力的分布及演化规律。研究表明：泡沫混凝土-衬砌接触面的破坏特征受法向应力与泡沫混凝土密度共同影响,其剪应力-剪切位移曲线形态可归结为3种类型,且随泡沫混凝土密度和法向应力的变化可以相互转化;泡沫混凝土密度及法向应力对接触面峰值强度、残余强度及剪切刚度的影响是相互的,且法向应力的影响权重较大。根据剪应力-剪切位移曲线的变化规律,提出了复合指数模型来反映泡沫混凝土-衬砌接触面在压剪作用下损伤演化及摩擦滑移过程,研究结果可以为更加有效的抗减震设计提供一定参考。 相似文献
6.
7.
针对红山窑膨胀红砂岩具有微膨胀、易软化、易风化的特点,采用扫描电子显微镜、X射线衍射仪、MTS815.03岩石力学刚性电液伺服试验机等先进的设备为测试手段,对3种不同风化程度的膨胀红砂岩湿化过程进行观察和机理分析,从试验和机理两方面探讨膨胀红砂岩的湿化性,从而进一步阐明红砂岩膨胀性、裂隙化具有本质的区别。试验结果表明：(1) 中风化红砂岩干燥时抗压强度为5.85 MPa,饱和试样为0.20 MPa,岩石本身强度随吸水率增加而明显下降,具有强烈的软化作用;(2) 膨胀红砂岩的湿化性随胶结系数的减小而愈加强烈,与红砂岩风化程度(埋深)无关。这些研究成果对红山窑水利枢纽工程红砂岩地基开挖易裂以及边坡表层溜坍预治具有较大的指导意义。 相似文献
8.
东巨寺沟隧道湿喷纤维混凝土支护结构和围岩稳定性位移模糊判别 总被引：1，自引：0，他引：1
湿法喷射混凝土可有效地改善隧道内作业环境、反弹量小、喷射质量高,是隧道支护结构施工值得推广的工艺。首次在宝鸡－兰州铁路复线东巨寺沟铁路隧道选取试验段,实施湿喷工艺喷射聚丙烯纤维混凝土,作为支护结构兼作永久性支护,免除二次衬砌工作,并进行水平位移收敛监测。采用非线性最小二乘法对该隧道水平收敛曲线进行回归分析,同时采用隧道稳定性模糊概率分析理论对不同断面位置处的隧道围岩稳定性进行判别分析。分析结果表明,采用湿喷纤维混凝土支护的隧道围岩处于稳定状态,可靠度指标高。 相似文献
9.
The Qaidam Basin, one of China’s most prolific petroliferous basins, is located in the northeastern corner of the Qinghai-Tibet Plateau. Using analytical data from cores, thin-sections and seismic data, and combined with the previous sequence stratigraphy research results, research on the reservoir characteristics was undertaken. The main controlling factors of reservoir quality in the sequence stratigraphy framework in the Lenghu area are discussed. The Lower Jurassic includes lowstand system tract (LST) and transitional systems tract (TST); the highstand systems tract are missing owing to tectonic uplift. The Lower Jurassic sandstones are composed of moderately to poorly sorted, subrounded sandstone representing several representative environments, including fan-delta and lacustrine facies. The main types of the Lower Jurassic sandstones are mostly feldspathic litharenite and lithic sandstone. The pore types of the Lower Jurassic sandstones are mainly secondary dissolution pores with few fracture types. The Lower Jurassic sandstones have experienced strong compaction that resulted in the loss of primary porosity. Carbonate cementation of the LST sandstones is greater than in the TST sandstones. Dissolution, which has an important role in reservoir development, is mainly caused by acidic fluids from the matured source rocks in the LST and meteoric water ingression from the top sequence boundary in the TST. Distributary channel sandstones adjacent to coal and mudstones are favourable reservoirs with turbidite sandstones adjacent to the sequence boundary less favourable reservoirs. 相似文献
10.
《Engineering Geology》2000,57(3-4):215-237
Weathering can induce a rapid change of rock material from initial rock-like properties to soil-like properties. The resistance of a rock to short-term weathering is described through a durability parameter called the slake durability index. As durability is an important engineering parameter, particularly for weak and clay-bearing rocks, it was assessed by a number of tests. The main purpose of this study is to assess the influence of the number of drying and wetting cycles and controls of mineralogical composition and strength on durability. For this purpose, 141 samples of different types of weak and clay-bearing rocks were selected from different parts of Turkey, and relationships between the above-mentioned rock characteristics were statistically investigated. The samples were subjected to multiple-cycle slake durability testing, X-ray diffraction (XRD) analysis and uniaxial compression testing. In addition, to assess the influence of mineralogical composition on durability, the mineral contents of the original material and the material passing from the drum of the slake durability apparatus after each cycle were also determined by XRD. The results indicate that the type and amount of clay minerals are the main factors influencing the variations of the slake durability index in all samples. The durability of the clay-bearing rocks studied correlates best with the amount of expandable clay minerals. A strong relationship between the uniaxial compressive strength and the fourth-cycle slake durability index is found only for the marls among the rock types studied. Assessment of gradation results of the spoil pile materials consisting of clay-bearing rocks also reveals that the increase in percentage of fines in old piles is indicative of material degradation, as is evident by multiple-cycle slaking. It is emphasized that two-cycle conventional slake durability testing did not appear to offer an acceptable indication of the durability of weak and clay-bearing rocks when compared with multiple-cyclic wetting and drying. Comments on the performance of the test are made that aim to make the testing process and interpretation of the results more reliable. 相似文献
11.
福建周宁水电站水压致裂地应力测量及其应用 总被引：2，自引：3，他引：2
周宁水电站在交通洞开挖过程中局部洞段发生了较强烈的岩爆。地下洞室和高压岔管、输水隧道设计及选择衬砌方式，需要查明原地应力状态。为此，采用水压致裂法在3个深钻孔中和岩爆部位进行了原位应力测量。结果表明，平面应力值随孔深增加呈线性增大；在岩爆和地下洞室附近，原位应力最大值为13～15 MPa，以水平挤压应力为主导，最大水平主应力方向为NW向。根据地应力测量资料和相关理论、判据分析认为：地下厂房长轴为NW向有利于围岩稳定；高压岔管和输水隧洞选用钢筋混凝土衬砌是可行的；发生局部岩爆，主要是由于隧道开挖围岩应力重新调整，在掌子面附近应力集中所致。 相似文献
12.
早期碳酸盐胶结作用对砂岩孔隙演化的影响——以塔里木盆地满加尔凹陷志留系砂岩为例 总被引：11，自引：4，他引：7
塔里木盆地满加尔凹陷志留系砂岩为无障壁的潮坪、滨岸及辫状河三角洲沉积的岩屑砂岩和岩屑质石英砂岩,对满北和满东、满南地区志留系砂岩成岩作用序次尤其是碳酸盐胶结的时间、方式和特征、物性的对比研究认为:砂岩中碳酸盐胶结的时间早晚对砂岩孔隙演化具有重要影响,满北地区志留系砂岩发育有大量早期泥晶碳酸盐胶结,显微镜下研究表明这种胶结作用发生在岩石受到充分压实之前,呈基底式胶结,岩石颗粒呈点接触或漂浮状分布于早期碳酸盐胶结物之中,这种胶结作用抑制了岩石后期的压实作用。尽管目前其埋藏达5 000～6 500 m,但其经历的压实作用并不强烈,粒间发育大量早期的碳酸盐胶结物,后来这些胶结物被溶蚀,形成了大量次生孔隙。而在满东和满南地区的志留系砂岩,碳酸盐胶结发生在岩石经过充分压实之后,晚期的碳酸盐胶结物仅分布于岩石经充分压实后的粒间孔隙中,含量较前者低,后期可供溶蚀的碳酸盐比前者少,因而溶蚀形成的次生孔隙有限。因此,尽管满东满南地区志留系埋藏比满北浅（3 700～5 000 m）,碳酸盐胶结物含量也低,也发育晚期碳酸盐胶结物的溶蚀,但岩石的压实作用比满北强,物性比满北低差。这主要与碳酸盐胶结的早晚有关,早期碳酸盐胶结对孔隙演化具有明显控制作用,有利于岩石孔隙的保存,为后来的溶蚀形成次生孔隙提供了条件。 相似文献
13.
元坝地区须家河组砂岩的致密化程度极高,以超低孔、超低渗储层为主,属于超致密砂岩。本文基于铸体薄片、阴极发光、扫描电镜和物性等资料,在对砂岩的岩石组分、孔隙类型及物性特征分析的基础上,通过与国内外典型致密砂岩对比,揭示研究区砂岩较其他砂岩致密化程度高的原因,分析超致密砂岩的勘探潜能。结果表明,研究区砂岩具有较高的塑性岩屑、碳酸盐岩岩屑和黏土杂基含量;填隙物以黏土杂基和钙质胶结物为主,较强的硅质胶结作用仅发育于石英砂岩中。孔隙多为黏土杂基晶间微孔,喉道呈窄缝状或不发育,孔喉分选差,偏细歪度。砂岩致密化程度高主要有两方面的原因:一是原始组构差,成分成熟度低,含有较高的塑性岩屑、碳酸盐岩岩屑和黏土杂基含量,导致砂岩在早成岩阶段既已经历了很强的压实作用和钙质胶结作用,致密化时间早,溶蚀作用不发育;二是成岩演化阶段高,砂岩经历了中成岩阶段的压溶及进一步的钙质/硅质胶结,使得砂岩超致密化。与国内外典型致密砂岩气藏对比表明,超致密砂岩有效孔隙少,对天然气的富集能力有限。元坝地区须家河组只有孔隙度近于8%(如长石岩屑砂岩)的砂岩才可成为有利的致密气储层。 相似文献
14.
The Middle Jurassic Khatatba Formation acts as a hydrocarbon reservoir in the subsurface in the Western Desert, Egypt. This study, which is based on core samples from two exploration boreholes, describes the lithological and diagenetic characteristics of the Khatatba Formation sandstones. The sandstones are fine‐ to coarse‐grained, moderately to well‐sorted quartz arenites, deposited in fluvial channels and in a shallow‐marine setting. Diagenetic components include mechanical and chemical compaction, cementation (calcite, clay minerals, quartz overgrowths, and a minor amount of pyrite), and dissolution of calcite cements and feldspar grains. The widespread occurrence of an early calcite cement suggests that the Khatatba sandstones lost a significant amount of primary porosity at an early stage of its diagenetic history. In addition to calcite, several different cements including kaolinite and syntaxial quartz overgrowth occur as pore‐filling and pore‐lining cements. Kaolinite (largely vermicular) fills pore spaces and causes reduction in the permeability of the reservoir. Based on framework grain–cement relationships, precipitation of the early calcite cement was either accompanied by or followed the development of part of the pore‐lining and pore‐filling cements. Secondary porosity development occurred due to partial to complete dissolution of early calcite cements and feldspar. Late kaolinite clay cement occurs due to dissolved feldspar and has an impact on the reservoir quality of the Khatatba sandstones. Open hydraulic fractures also generated significant secondary porosity in sandstone reservoirs, where both fractures and dissolution took place in multiple phases during late diagenetic stages. The diagenesis and sedimentary facies help control the reservoir quality of the Khatatba sandstones. Fluvial channel sandstones have the highest porosities and permeabilities, in part because of calcite cementation, which inhibited authigenic clays or was later dissolved, creating intergranular secondary porosity. Fluvial crevasse‐splay and marine sandstones have the lowest reservoir quality because of an abundance of depositional kaolinite matrix and pervasive, shallow‐burial calcite and quartz overgrowth cements, respectively. Copyright © 2013 John Wiley & Sons, Ltd. 相似文献
15.
16.
隧道衬砌结构三轴压缩蠕变特性试验研究 总被引：2，自引：0，他引：2
使用MTS-815液压伺服系统对隧道衬砌的混凝土试件进行了三轴压缩蠕变试验,当压缩蠕变强度达到混凝土试件抗压强度的85%时进入加速蠕变阶段。分析了隧道衬砌混凝土三轴压缩蠕变变形的特点,确定采用摩尔-库仑准则和Burgers模型串联组合而成的黏弹塑性模型可以合理地描述衬砌混凝土的蠕变特性。组合模型的黏弹性状态与Burgers模型一致,塑性状态与Mohr-Coulomb模型一致,它不仅能够反映衬砌结构蠕变的全过程,且能模拟材料的黏弹塑性变形特性,解决了典型Burgers蠕变模型只能描述黏弹性蠕变的缺陷。同时也研究了三轴试验条件下组合蠕变模型参数的求解方法,得到隧道衬砌混凝土的蠕变参数。 相似文献
17.
综合岩心观察、薄片鉴定、砂砾岩厚度及百分含量等资料,对东营凹陷北带沙四段砂砾岩的沉积特征、成因类型及沉积演化模式进行了系统研究。结果表明,东营凹陷北带沙四段砂砾岩储层中块状层理、粒序层理、平行层理、叠覆冲刷构造、交错层理发育,同时变形构造、泥岩撕裂屑、重荷模和火焰构造常见。碎屑颗粒表现为无分选-中等分选、棱角状-次棱角状到次圆状的近物源沉积特征。岩相类型以块状层理砾岩相、递变层理砾岩相、递变层理砂质砾岩相、交错层理砾质砂岩相、平行层理砾质砂岩相、块状层理砾质砂岩相、块状砂岩相、平行层理砂岩相、块状层理砂岩相、变形层理砂岩相、泥质撕裂变形砂岩相、薄层透镜状或压扁层理砂岩相为主。综合古地貌、砂砾岩沉积特征及沉积机制等,认为东营凹陷北带沙四段主要发育近岸水下扇、湖底扇和扇三角洲等成因类型的砂砾岩扇体。在沉积演化上,沙四下亚段沉积时期,胜坨地区和民丰地区发育近岸水下扇沉积,利津地区发育扇三角洲沉积,扇体规模较小,横向连续性较差;沙四上亚段沉积时期,胜坨地区和民丰地区广泛发育近岸水下扇-湖底扇沉积,利津西部地区发育扇三角洲沉积,扇体规模较大,横向连片发育。 相似文献
18.
聚丙烯纤维低弹模混凝土以其优良的工作性能和力学性能成为近年来我国水利工程大坝防渗墙采用的主要材料之一.在室内试验的基础上,对聚丙烯低弹模混凝土的强度、塌落度特性进行了研究;开发了一套混凝土耐久性渗透水采集仪,对聚丙烯低弹模混凝土的渗透性和耐久性进行了研究,试验结果表明：与传统低弹模混凝土相比,聚丙烯低弹模混凝土的抗压、弹模变化不大,抗拉强度有提高,抗渗性能明显改善,渗透系数降低了一个数量级左右,耐久性年限可以进一步提高,研究结果为聚丙烯低弹模混凝土大坝防渗墙的工程应用提供了技术支撑. 相似文献
19.
The Frewens sandstone is composed of two elongate tide-influenced sandstone bodies that are positioned directly above and slightly landward of a more wave-influenced lobate sandstone. The 20-km-long, 3-km-wide Frewens sandstone bodies coarsen upwards and fine away from their axes, have gradational bases and margins and have eroded tops abruptly overlain by marine shales. These sandstones are superbly exposed in large cliffs on the banks of the South Fork of the Powder River in central Wyoming, USA. The deposits change upwards from thinly interbedded sandstones and mudstones to metre-thick heterolithic cross-strata and, finally, to metres-thick sandstone-dominated cross-strata. There is abundant evidence for tidal modulation of depositional flows; however, palaeocurrents were strongly ebb-dominated and nearly parallel the trend of sandstone-body elongation. Detailed mapping of stratal geometry and facies across these exposures shows a complex internal architecture. Large-scale bedding units within sandstone bodies are defined by alternations in facies, bed thickness and the abundance of shales. Such bedsets are inclined (5°–15°) in walls oriented parallel to palaeoflow and gradually decrease in dip over hundreds of metres as they extend from the sandstone-dominated deposits higher in a sandstone body to muddier deposits lower in the body. Where viewed perpendicular to palaeoflow, bedsets are 100-metre-wide lenses that shingle off the sandstone-body axis towards its margins. The sandstone bodies are interpreted as sand ridge deposits formed on the shoreface of a tide-influenced river delta. Metres-thick cross-strata in the upper parts of sandstone bodies resemble deposits of bars (sandwaves) formed where tidal currents moved across shallows and the tops of tidal ridges. Heterolithic deposits lower in sandstone bodies record fluctuating currents caused by ebb and flood tides and varying river discharge. Erosion surfaces capping sandstone bodies record tidal ravinement. The tidal ridges were abandoned following transgression and covered with marine mud as waters deepened. 相似文献
20.
高强防寒保温泡沫混凝土研制与工程应用 总被引：1，自引：1，他引：0
复杂地层寒区隧道填充材料需兼具防寒保温、抗震和优化支护等性能,为解决常规泡沫混凝土在复杂地层寒区隧道应用中存在的不足,通过正交试验得到了自制泡沫混凝土的最佳配合比,研制了一种高强防寒保温泡沫混凝土.通过室内试验,研究了所制泡沫混凝土的保温性能和冻融劣化特征,并采用数值分析方法探讨了西藏嘎隆拉隧道初衬和二衬之间加设泡沫混凝土垫层后的温度场变化规律.结果表明：该泡沫混凝土具有较好的保温性能和抗冻融损伤性能,同时强度、延性较普通泡沫混凝土都有明显改善.数值计算结果显示,当在初衬和二衬之间增设泡沫混凝土垫层时,其相应位置的温度变幅由不设置时的4.5℃变为2℃,最低温度由1℃提高到了3℃,表明加设所研制泡沫混凝土垫层对于阻止围岩受到隧道内冷空气的侵害具有非常显著的效果. 相似文献