共查询到20条相似文献，搜索用时 15 毫秒
1.
The concept of a spatially distributed unit hydrograph is based on the fact that the unit hydrograph can be derived from the time–area curve of a watershed by the S-curve method. The time–area diagram is a graph of cumulative drainage area contributing to discharge at the watershed outlet within a specified time of travel. Accurate determination of the time–area diagram is made possible by using a GIS. The GIS is used to describe the connectivity of the links in the watershed flow network and to calculate distances and travel times to the watershed outlet for various points within the watershed. Overland flow travel times are calculated by the kinematic wave equation for time to equilibrium; channel flow times are based on the Manning and continuity equations. To account for channel storage, travel times for channel reaches are increased by a percentage depending on the channel reach length and geometry. With GIS capability for rainfall mapping, the assumption of a uniform spatial rainfall distribution is no longer necessary; hence the term, spatially distributed unit hydrograph. An example of the application for the Waiparous Creek in the Alberta Foothills is given. IDRISI is used to develop a simple digital elevation model of the 229 km2 watershed, using 1 km × 1 km grid cells. A grid of flow directions is developed and used to create an equivalent channel network. Excess rainfall for each 1 km × 1 km cell is individually computed by the Soil Conservation Service (SCS) runoff curve method and routed through the equivalent channel network to obtain the time–area curve. The derived unit hydrograph gave excellent results in simulating an observed flood hydrograph. The distributed unit hydrograph is no longer a lumped model, since it accounts for internal distribution of rainfall and runoff. It is derived for a watershed without the need for observed rainfall and discharge data, because it is essentially a geomorphoclimatic approach. As such, it allows the derivation of watershed responses (hydrographs) to inputs of various magnitudes, thus eliminating the assumption of proportionality of input and output if needed. The superposition of outputs is retained in simulating flood hydrographs by convolution, since it has been shown that some non-linear systems satisfy the principle of superposition. The distributed unit hydrograph appears to be a very promising rainfall runoff model based on GIS technology. 相似文献
2.
Nonlinear transformation of unit hydrograph 总被引：1，自引：0，他引：1
Unit hydrograph (UH) and its numerous derivatives have been popular for estimation of flood hydrographs. Two major assumptions still overshadow UH applications. One is the linearity and the other is time invariance. In theory, only peak discharge of an equilibrium hydrograph follows linear proportionality to excess rainfall intensity. In trying to relax the linearity constraint, this paper aims to propose a nonlinear way of transforming a given UH to other general hydrographs. The transformation or mapping technique relies on a simple rainfall ratio raised to a power less than unity. The case of nonlinear transformation is illustrated for a number of watershed geometries with either known kinematic wave analytic solutions or observed data. The nonlinear UH approach also relaxes the assumption of constant time base of the UH. The proposed nonlinear UH transformation may thus be viewed as a major step in closing the gap between physically based and traditional UH-based surface runoff simulation approaches. 相似文献
3.
Michael McCaig 《地球表面变化过程与地形》1983,8(3):239-252
Analysis of hydrographs from a 4·3 hectare stream head catchment indicates that storm runoff is generated from dynamic source areas. The volume and timing of contributions from different parts of the catchment show, when compared with the extent of surface saturation, that pipeflow generated from areas not saturated at the soil surface is a significant component of the quickflow hydrograph. A simple model of pipeflow generation and contribution is discussed in the light of field results. 相似文献
4.
This work develops a top‐down modelling approach for storm‐event rainfall–runoff model calibration at unmeasured sites in Taiwan. Twenty‐six storm events occurring in seven sub‐catchments in the Kao‐Ping River provided the analytical data set. Regional formulas for three important features of a streamflow hydrograph, i.e. time to peak, peak flow, and total runoff volume, were developed via the characteristics of storm event and catchment using multivariate regression analysis. Validation of the regional formulas demonstrates that they reasonably predict the three features of a streamflow hydrograph at ungauged sites. All of the sub‐catchments in the study area were then adopted as ungauged areas, and the three streamflow hydrograph features were calculated by the regional formulas and substituted into the fuzzy multi‐objective function for rainfall–runoff model calibration. Calibration results show that the proposed approach can effectively simulate the streamflow hydrographs at the ungauged sites. The simulated hydrographs more closely resemble observed hydrographs than hydrographs synthesized using the Soil Conservation Service (SCS) dimensionless unit hydrograph method, a conventional method for hydrograph estimation at ungauged sites in Taiwan. Copyright © 2008 John Wiley & Sons, Ltd. 相似文献
5.
In this paper a very general rainfall-runoff model structure (described below) is shown to reduce to a unit hydrograph model structure. For the general model, a multi-linear unit hydrograph approach is used to develop subarea runoff, and is coupled to a multi-linear channel flow routing method to develop a link-node rainfall-runoff model network. The spatial and temporal rainfall distribution over the catchment is probabilistically related to a known rainfall data source located in the catchment in order to account for the stochastic nature of rainfall with respect to the rain gauge measured data. The resulting link node model structure is a series of stochastic integral equations, one equation for each subarea. A cumulative stochastic integral equation is developed as a sum of the above series, and includes the complete spatial and temporal variabilities of the rainfall over the catchment. The resulting stochastic integral equation is seen to be an extension of the well-known single area unit hydrograph method, except that the model output of a runoff hydrograph is a distribution of outcomes (or realizations) when applied to problems involving prediction of storm runoff; that is, the model output is a set of probable runoff hydrographs, each outcome being the results of calibration to a known storm event. 相似文献
6.
T. V. Hromodka II R. J. Whitley 《Stochastic Environmental Research and Risk Assessment (SERRA)》1994,8(4):259-268
In this paper a very general rainfall-runoff model structure (described below) is shown to reduce to a unit hydrograph model structure. For the general model, a multi-linear unit hydrograph approach is used to develop subarea runoff, and is coupled to a multi-linear channel flow routing method to develop a link-node rainfall-runoff model network. The spatial and temporal rainfall distribution over the catchment is probabilistically related to a known rainfall data source located in the catchment in order to account for the stochastic nature of rainfall with respect to the rain gauge measured data. The resulting link node model structure is a series of stochastic integral equations, one equation for each subarea. A cumulative stochastic integral equation is developed as a sum of the above series, and includes the complete spatial and temporal variabilities of the rainfall over the catchment. The resulting stochastic integral equation is seen to be an extension of the well-known single area unit hydrograph method, except that the model output of a runoff hydrograph is a distribution of outcomes (or realizations) when applied to problems involving prediction of storm runoff; that is, the model output is a set of probable runoff hydrographs, each outcome being the results of calibration to a known storm event. 相似文献
7.
Application of Gibbs’ model to urban drainage networks: a case study in southwestern Chicago,USA 
下载免费PDF全文
下载免费PDF全文 Hydrologic analysis of urban drainage networks often encounters a number of issues, including data acquisition and preparation for modelling, which can be costly and time‐consuming processes. Moreover, it can get more challenging with missing data and complex loops inside networks. In this article, Gibbs’ model is applied to urban drainage networks to investigate the possibility of replacing an actual existing urban drainage network in terms of the shape and peak flow of the hydrographs at the outlet. The characteristic network configuration is given as a value of a parameter β of Gibbs’ model. Instead of the actual network, stochastic networks from Monte‐Carlo simulation are utilized to obtain a synthetic width function from the generated networks, and runoff hydrographs are estimated based on it. The results show that the synthetic width function and the resulting hydrographs obtained from the networks simulated by Gibbs’ model are close to those from the actual network. The result also shows that even the behaviour of a looped network can be approximated by equivalent dendritic networks generated by Gibbs’ model. The applicability of a stochastic network model in urban catchment implies a complement to modelling approaches in case of data unavailability. Moreover, the network property (β) is utilized not only to estimate the discharge hydrograph of a catchment but also as a key link to evaluate the effect from rainstorm movement in urban catchments. Copyright © 2012 John Wiley & Sons, Ltd. 相似文献
8.
A previous hydrometric study of runoff production in tussock grassland drainage basins in Otago (45°50′S, 169°45′E), New Zealand, revealed a marked change of slope in storm hydrograph recessions. An environmental isotope study was initiated to investigate the runoff mechanisms operating and to test specific hypotheses to explain this break in the hydrograph recession. The results indicated that for quickflow volumes in excess of 10mm, the first part of the storm hydrograph can be attributed to two separate sources, namely, ‘old’ water from a shallow, unconfined groundwater reservoir and ‘new’ water from saturation overland flow on the lower wetlands of concave slopes. Despite the extensive area of wetlands, ‘old’ water runoff from the unconfined groundwater reservoir is delivered more rapidly to the stream than ‘new’ water from saturation overland flow. Substantial surface storage in the wetlands has first to be exceeded before rain becomes a significant part of stream discharge. For quickflow volumes less than 10mm, only ‘old’ water from groundwater contributes to the first part of the hydrograph recession. This means that only the largest 7 per cent of storms (in terms of quickflow volume) generate quickflow containing significant amounts of ‘new water’. The second part of the recession of the storm hydrograph consists of ‘old’ water derived from a remarkably well-mixed shallow unconfined groundwater body. 相似文献
9.
Stream network morphometrics have been used frequently in environmental applications and are embedded in several hydrological models. This is because channel network geometry partly controls the runoff response of a basin. Network indices are often measured from channels that are mapped from digital elevation models (DEMs) using automated procedures. Simulations were used in this paper to study the influence of elevation error on the reliability of estimates of several common morphometrics, including stream order, the bifurcation, length, area and slope ratios, stream magnitude, network diameter, the flood magnitude and timing parameters of the geomorphological instantaneous unit hydrograph (GIUH) and the network width function. DEMs of three UK basins, ranging from high to low relief, were used for the analyses. The findings showed that moderate elevation error (RMSE of 1·8 m) can result in significant uncertainty in DEM‐mapped network morphometrics and that this uncertainty can be expressed in complex ways. For example, estimates of the bifurcation, length and area ratios and the flood magnitude and timing parameters of the GIUH each displayed multimodal frequency distributions, i.e. two or more estimated values were highly likely. Furthermore, these preferential estimates were wide ranging relative to the ranges typically observed for these indices. The wide‐ranging estimates of the two GIUH parameters represented significant uncertainty in the shape of the unit hydrograph. Stream magnitude, network diameter and the network width function were found to be highly sensitive to elevation error because of the difficulty in mapping low‐magnitude links. Uncertainties in the width function were found to increase with distance from outlet, implying that hydrological models that use network width contain greater uncertainty in the shape of the falling limb of the hydrograph. In light of these findings, care should be exercised when interpreting the results of analyses based on DEM‐mapped stream networks. Copyright © 2007 John Wiley & Sons, Ltd. 相似文献
10.
The rainfall–runoff process consists of an excess rainfall process and a runoff concentration process. A transient one-dimensional finite difference model describing the partitioning of precipitation between surface runoff, soil moisture storage and deep percolation, through the coupling of saturated–unsaturated zones, has been implemented in a geographical information system including data on vegetation cover derived from the Landsat Thematic Mapper. The model has been used to simulate both the rainfall excess and the resultant outflow hydrographs for a small arid zone drainage basin in the Andean region of Argentina. The overall hydrograph shape, peak discharge, runoff volume and flow duration are predicted within a relative squared error of 13.2%. The spatial input data and the model structure are discussed and suggestions for applications to larger complex basins and for future refinements in the technique are presented. 相似文献
11.
V. P. Singh 《水文研究》1997,11(12):1649-1669
The shape, timing and peak flow of a stream flow hydrograph are significantly influenced by spatial and temporal variability in rainfall and watershed characteristics. Depending upon the size and shape of a watershed, its hydrological response is closely linked with storm dynamics. On an urban watershed a rain storm moving in the direction of flow produces a higher peak than it would if it were moving in the opposite direction. The effect of storm speed on peak discharge is much less for rapidly moving storms than for storms moving at about the same speed as the flow velocity. In a relatively homogeneous watershed the most important effect of spatial variability of rainfall occurs in the timing and shape of the runoff hydrograph. Temporally variable rainfall leads to higher peak flow than does constant rainfall. Significant errors in the prediction of runoff occur when an equivalent uniform hillslope is used to represent a heterogeneous hillslope. When average soil properties are used instead of spatially variable properties, significant differences are observed in infiltration. Spatially variable roughness alters the flow dynamics significantly. © 1997 John Wiley & Sons, Ltd. 相似文献
12.
Understanding plot‐scale hydrology of Lesser Himalayan watershed—A field study and HYDRUS‐2D modelling approach 下载免费PDF全文
下载免费PDF全文 Soil moisture dynamics have a significant effect on overland flow generation. Catchment aspect is one of the major controlling factors of overland flow and soil moisture behaviour. A few experimental studies have been carried out in the uneven topography of the Himalayas. This study presents plot‐scale experiments using portable rainfall simulator at an altitude of 1,230 m above mean sea level and modelling of overland flow using observed datasets. Two plots were selected in 2 different aspects of Aglar watershed of Lesser Himalaya; the agro‐forested (AF) plot was positioned at the north aspect whereas the degraded (DE) plot was located at the south aspect of the hillslope. HS flumes and rain gauges were installed to measure the runoff at the outlet of the plot and the rainfall depth during rainfall simulation experiments. Moreover, 10 soil moisture sensors were installed at upslope and downslope locations of both the plots at 5, 15, 25, 35, and 45 cm depth from ground level to capture the soil moisture dynamics. The tests were conducted at intensities of 79.8 and 75 mm/hr in AF plot and 82.2 and 72 mm/hr in the DE plot during Test 1 and Test 2, respectively. The observed data indicate the presence of reinfiltration process only in the AF plot. The high water holding capacity and the presence of reinfiltration process results in less runoff volume in the AF plot compared with the DE plot. The Hortonian overland flow mechanism was found to be the dominant overland flow mechanism as only a few layers of top soil get saturated during all of the rainfall–runoff experiments. The runoff, rainfall, and soil moisture data were subsequently used to calibrate the parameters of HYDRUS‐2D overland flow module to simulate the runoff hydrograph and soil moisture. The components of hydrograph were evaluated in terms of peak discharge, runoff volume and time of concentration, the results were found to be within the satisfactory range. The goodness of fit of simulated hydrographs were more than 0.85 and 0.95 for AF and DE plot, respectively. The model produced satisfactory simulation results of soil moisture for all of the rainfall–runoff experiments. The HYDRUS‐2D overland flow module was found promising to simulate the runoff hydrograph and soil moisture in plot‐scale research. 相似文献
13.
Shin‐Jen Cheng 《水文研究》2010,24(20):2851-2870
This study explores the hydrograph characteristics of quick and slow runoffs in watershed outlet hydrographs. The quick and slow runoffs were modelled using a conceptual model of three linear cascade reservoirs that have exponential decay response expressions. Mean rainfall for model inputs was estimated using the block Kriging method. The 107 storms during the 1966–2008 events were classified as large, medium and small events according to the observed streamflow. The optimal hydrograph parameters for 61 rainfall‐runoff events were calibrated using the shuffled complex evolution optimal algorithm. The efficacy of the model was verified using the seven averaged parameters of three types of 46 events and was compared with three evaluation criteria resulting from the Nash model. The 61 calibrations were used to analyse and compare the characteristics of quick and slow flows in early and later periods (1966–2002 and 2003–2008). Finally, the following five conclusions were obtained: (1) The base time of a slow runoff hydrograph is the same as that of a total runoff hydrograph. (2) A quick runoff with a long period occurs when soil antecedent moisture is low and with a short period under a high value. (3) The time to peak of hydrograph components is directly proportional to peak time of a hyetograph; the time to peak of quick and slow flows is about 0·97 and 1·12 times the peak time of a hyetograph, respectively. (4) The peak of hydrograph components is relative to a total runoff hydrograph; the percentages for quick runoff are approximately 71% and 13% for slow flow. Finally, (5) the volume of a quick runoff component is 49% of a total runoff volume and 37% for a slow runoff volume. Copyright © 2010 John Wiley & Sons, Ltd. 相似文献
14.
Two models, one linear and one non‐linear, were employed for the prediction of flow discharge hydrographs at sites receiving significant lateral inflow. The linear model is based on a rating curve and permits a quick estimation of flow at a downstream site. The non‐linear model is based on a multilayer feed‐forward back propagation (FFBP) artificial neural network (ANN) and uses flow‐stage data measured at the upstream and downstream stations. ANN predicted the real‐time storm hydrographs satisfactorily and better than did the linear model. The results of sensitivity analysis indicated that when the lateral inflow contribution to the channel reach was insignificant, ANN, using only the flow‐stage data at the upstream station, satisfactorily predicted the hydrograph at the downstream station. The prediction error of ANN increases exponentially with the difference between the peak discharge used in training and that used in testing. ANN was also employed for flood forecasting and was compared with the modified Muskingum model (MMM). For a 4‐h lead time, MMM forecasts the floods reliably but could not be applied to reaches for lead times greater than the wave travel time. Although ANN and MMM had comparable performances for an 8‐h lead time, ANN is capable of forecasting floods with lead times longer than the wave travel time. Copyright © 2007 John Wiley & Sons, Ltd. 相似文献
15.
Ben D. Plumb Carmelo Juez William K. Annable Chris W. McKie Mario J. Franca 《地球表面变化过程与地形》2020,45(4):816-830
A laboratory study was undertaken to investigate how changes in flow regime and hydrograph shape (number of cycled hydrographs and duration of each hydrograph) together impact bedload transport and resulting bed morphology. Three hydrologic conditions (experiments) representing different levels of urbanization, or analogously different flow regimes, were derived from measured hydrometric field data. Each experiment consisted of a series of hydrographs with equal peak discharge and varying frequency, duration and flashiness. Bedload transport was measured throughout each hydrograph and measurements of bed topography and surface texture were recorded after each hydrograph. The results revealed hysteresis loops in both the total and fractional transport, with more pronounced loops for longer duration hydrographs, corresponding to lower rate of unsteadiness until reaching the peak discharge (pre-urbanization conditions). Shorter duration hydrographs (urban conditions) displayed more time above critical shear stress thresholds leading to higher bedload transport rates and ultimately to more variable hysteresis patterns. Surface textures from photographic methods revealed surface armoring in all experiments, with larger armor ratios for longer duration hydrographs, speculated to be due to vertical sorting and more time for bed rearrangements to occur. The direction of bed surface adjustment was linked to bedload hysteresis, more precisely with clockwise hysteresis (longer hydrographs) typically resulting in bed coarsening. More frequent and shorter duration hydrographs result in greater relative channel adjustments in slope, topographic variability and surface texture. © 2019 John Wiley & Sons, Ltd. 相似文献
16.
This article explores the relations between network properties and the effect from moving rainstorms in terms of the peak response and time to centroid of hydrographs. A simple conceptual rectangular catchment is introduced with different configurations of drainage network simulated by the Gibbs stochastic model. The efficiency of the urban pipe networks varies widely compared with natural river networks; hence, the Gibbs model can be an appropriate approach to represent the network properties in urban drainage system. Simple cases of rainstorms moving with upstream and downstream directions and different speeds are considered to investigate the effect of rainstorm movement on urban drainage network runoff hydrographs. The results indicate that the effect of the direction and speed of the rainstorm movement varies significantly depending on the network properties. The relationship between storm speed and direction and the change in the peak runoff is dependent on the network configuration and network efficiency. In contrast to previous studies, this study indicates that the speed and direction of the rainfall movement that produces the maximum peak discharge changes depending on the network configuration. Copyright © 2011 John Wiley & Sons, Ltd. 相似文献
17.
Andrew J. Miller Claire Welty Jonathan M. Duncan Mary Lynn Baeck James A. Smith 《水文研究》2021,35(7):e14287
We report an empirical analysis of the hydrologic response of three small, highly impervious urban watersheds to pulse rainfall events, to assess how traditional stormwater management (SWM) alters urban hydrographs. The watersheds vary in SWM coverage from 3% to 61% and in impervious cover from 45% to 67%. By selecting a set of storm events that involved a single rainfall pulse with >96% of total precipitation delivered in 60 min, we reduced the effect of differences between storms on hydrograph response to isolate characteristic responses attributable to watershed properties. Watershed-average radar rainfall data were used to generate local storm hyetographs for each event in each watershed, thus compensating for the extreme spatial and temporal heterogeneity of short-duration, intense rainfall events. By normalizing discharge values to the discharge peak and centring each hydrograph on the time of peak we were able to visualize the envelope of hydrographs for each group and to generate representative composite hydrographs for comparison across the three watersheds. Despite dramatic differences in the fraction of watershed area draining to SWM features across these three headwater tributaries, we did not find strong evidence that SWM causes significant attenuation of the hydrograph peak. Hydrograph response for the three watersheds is remarkably uniform despite contrasts in SWM, impervious cover and spatial patterns of land cover type. The primary difference in hydrograph response is observed on the recession limb of the hydrograph, and that change appears to be associated with higher storm-total runoff in the watersheds with more area draining to SWM. Our findings contribute more evidence to the work of previous authors suggesting that SWM is less effective at attenuating urban hydrographs than is commonly assumed. Our findings also are consistent with previous work concluding that percent impervious cover may have greater influence on runoff volume than percent SWM coverage. 相似文献
18.
Two‐dimensional continuous simulation of spatiotemporally varied hydrological processes using the time‐area method 下载免费PDF全文
下载免费PDF全文 Distributed, continuous hydrologic models promote better understanding of hydrology and enable integrated hydrologic analyses by providing a more detailed picture of water transport processes across the varying landscape. However, such models are not widely used in routine modelling practices, due in part to the extensive data input requirements, computational demands, and complexity of routing algorithms. We developed a two‐dimensional continuous hydrologic model, HYSTAR, using a time‐area method within a grid‐based spatial data model with the goal of providing an alternative way to simulate spatiotemporally varied watershed‐scale hydrologic processes. The model calculates the direct runoff hydrograph by coupling a time‐area routing scheme with a dynamic rainfall excess sub‐model implemented here using a modified curve number method with an hourly time step, explicitly considering downstream ‘reinfiltration’ of routed surface runoff. Soil moisture content is determined at each time interval based on a water balance equation, and overland and channel runoff is routed on time‐area maps, representing spatial variation in hydraulic characteristics for each time interval in a storm event. Simulating runoff hydrographs does not depend on unit hydrograph theory or on solution of the Saint Venant equation, yet retains the simplicity of a unit hydrograph approach and the capability of explicitly simulating two‐dimensional flow routing. The model provided acceptable performance in predicting daily and monthly runoff for a 6‐year period for a watershed in Virginia (USA) using readily available geographic information about the watershed landscape. Spatial and temporal variability in simulated effective runoff depth and time area maps dynamically show the areas of the watershed contributing to the direct runoff hydrograph at the outlet over time, consistent with the variable source area overland flow generation mechanism. The model offers a way to simulate watershed processes and runoff hydrographs using the time‐area method, providing a simple, efficient, and sound framework that explicitly represents mechanisms of spatially and temporally varied hydrologic processes. Copyright © 2015 John Wiley & Sons, Ltd. 相似文献
19.
B. I. KOUDÉLINE 《水文科学杂志》2013,58(3):25-35
Abstract Throughflow has been measured from three soil horizons on a 12 slope with impermeable, bedrock. Storm flow comes from the 10–45 cm horizon and is controlled by the upslope extent of saturated conditions. Base flow comes from the 45–75 cm horizon and is supplied by slow unsaturated flow from the whole soil mass to a small constant zone of saturation. Differences between input and output stream hydrographs over 270 metres of channel are attributed to throughflow and correlate well with measured values providing a basis for separating throughflow components from the stream hydrograph. Observed stream flows contain no overland flow or ground water flow components. The main basin flood peak is not generated within this control section of channel but is produced in the headwater zone (0.1 km2) by the faster runoff characteristics of the soils in that area and by topographic factors which lead to rapid channel extension. 相似文献
20.
Study on effect of surface roughness on overland flow from different geometric surfaces through numerical simulation 下载免费PDF全文
下载免费PDF全文 Effect of variability in surface roughness on overland flow from different geometric surfaces is investigated using numerical solution of diffusion wave equation. Three geometric surfaces rectangular plane, converging and diverging plane at slopes 1 to 3% are used. Overland flow is generated by applying rainfall at constant intensity of 10 mm/h for period 30 min and 100 min. Three scenarios of spatial roughness conditions viz. roughness increasing in downstream direction, roughness decreasing in downstream direction and roughness distributed at random are considered. Effect of variability of roughness on overland flow in terms of depth, velocity of flow and discharge along the distance from upstream to downstream for different geometric surfaces are discussed in detail. Results from the study indicate that roughness distribution has significant effect on peak, time to peak and overall shape of the overland flow hydrograph. The peak occurs earlier for the scenario when roughness increases in downstream direction as compared to scenario when roughness is decreasing in downstream for all three geometric surfaces due to very low friction factor and more velocity at the top of the domain. The converging plane attains equilibrium state early as compared to rectangular and diverging plane. Different set of random values result in different time to peak and shape of hydrograph for rectangular and diverging plane. However, in case of converging plane, the shape of computed hydrographs remains almost similar for different sets of random roughness values indicating stronger influence of converging geometry than effect due to variation of roughness sequence on computed runoff hydrograph. Hierarchically, the influence of geometry on overland flow is stronger than the influence of slope and the influence of slope is stronger than the influence of roughness. Copyright © 2013 John Wiley & Sons, Ltd. 相似文献