共查询到20条相似文献，搜索用时 625 毫秒
1.
A time domain boundary element method (BEM) for evaluating stresses in an axisymmetric soil mass undergoing consolidation has been developed. Previous BEM work on axisymmetric poroelasticity for boundary displacements and pore pressures is extended to permit the computation of stresses at both boundary and interior points. The stress formulation preserves the surface-only discretization. The boundary displacement integral equation is progressively differentiated to obtain the related stress and strain integral equations. Explicit expressions for the steady-state axisymmetric fundamental solutions are derived in this process. The transient components of the integrands are obtained directly from the transformation of the three-dimensional kernels into a cylindrical system. Numerical implementation of these integral equations is carried out within a general purpose BEM computer code and several illustrative examples are presented to validate the method. 相似文献
2.
A note on the consolidation settlement of a rigid circular foundation on a poroelastic halfspace 
下载免费PDF全文
下载免费PDF全文 This paper uses Biot's poroelasticity approach to examine the consolidation behaviour of a rigid foundation with a frictionless base in contact with a poroelastic halfspace. The mathematical development of the mixed boundary value problem involves a set of dual integral equations in the Laplace transform domain which cannot be conveniently solved by employing conventional procedures. In this paper, a numerical solution is developed using a scheme where the contact normal stress is approximated by a discretized equivalent. The influence of limiting drainage boundary conditions at the entire surface of the halfspace on the degree of consolidation of the rigid circular foundation is investigated. The results obtained in this study are compared with the corresponding results given in the literature. Copyright © 2016 John Wiley & Sons, Ltd. 相似文献
3.
In this study, the dynamic response of a poroelastic half‐space to a point fluid sink is investigated using Biot's dynamic theory of poroelasticity. Based on Biot's theory, the governing field equations are re‐formulated in frequency domain with solid displacement and pore pressure. In a cylindrical coordinate system, a method of displacement potentials for axisymmetric displacement field is proposed to decouple the Biot's field equations to three scalar Helmholtz equations, and then the general solution to axisymmetric problems are obtained. The full‐space fundamental singular solution for a point sink is also derived using potential methods. The mirror‐image method is finally applied to construct the fundamental solution for a point sink buried in a poroelastic half‐space. Furthermore, a numerical study is conducted for a rock, that is, Berea sandstone, as a representative example. Copyright © 2013 John Wiley & Sons, Ltd. 相似文献
4.
A high‐resolution local RBF collocation method for steady‐state poroelasticity and hydromechanical damage analysis 下载免费PDF全文
下载免费PDF全文 In this work, we describe a meshless numerical method based on local collocation with RBFs for the solution of the poroelasticity equation. The RBF finite collocation approach forms a series of overlapping nodal stencils, over which an RBF collocation is performed. These local collocation systems enforce the governing PDE operator throughout their interior, with the intersystem communication occurring via the collocation of field variables at the stencil periphery. The method does not rely on a generalised finite differencing approach, whereby the governing partial differential operator is reconstructed at the global level to drive the solution of the PDE. Instead, the PDE governing and boundary operators are enforced directly within the local RBF collocation systems, and the sparse global assembly is formed by reconstructing the value of the field variables at the centrepoint of the local stencils. In this way, the solution of the PDE is driven entirely by the local RBF collocation, and the method more closely resembles the approach of the full‐domain RBF collocation method. By formulating the problem in this fashion, high rates of convergence may be attained without the computational cost and numerical ill‐conditioning issues that are associated with the full‐domain RBF collocation approach. An analytical solution is formulated for a 2D poroelastic fluid injection scenario and is used to verify the proposed implementation of the method. Highly accurate solutions are produced, and convergence rates in excess of sixth order are observed for each field variable (i.e. pressure and displacement) and field‐variable derivative (i.e. pressure gradients and stresses). The stress and displacement fields resulting from the solution of the poroelasticity equation are then used to describe the formation and propagation of microfractures and microfissures, which may form in the presence of large shear strain, in terms of a continuous damage variable which modifies the mechanical and hydraulic properties of the porous medium. The formation of such hydromechanical damage, and the resulting increase in hydraulic conductivity, is investigated for a pressurised injection into sandstone. Copyright © 2014 John Wiley & Sons, Ltd. 相似文献
5.
An analytical solution is proposed for transient flow and deformation coupling of a fluid‐saturated poroelastic medium within a finite two‐dimensional (2‐D) rectangular domain. In this study, the porous medium is assumed to be isotropic, homogeneous, and compressible. In addition, the point sink can be located at an arbitrary position in the porous medium. The fluid–solid interaction in porous media is governed by the general Biot's consolidation theory. The method of integral transforms is applied in the analytical formulation of closed‐form solutions. The proposed analytical solution is then verified against both exact and numerical results. The analytical solution is first simplified and validated by comparison with an existing exact solution for the uncoupled problem. Then, a case study for pumping from a confined aquifer is performed. The consistency between the numerical solution and the analytical solution confirms the accuracy and reliability of the analytical solution presented in this paper. The proposed analytical solution can help us to obtain in‐depth insights into time‐dependent mechanical behavior due to fluid withdrawal within finite 2‐D porous media. Moreover, it can also be of great significance to calibrate numerical solutions in plane strain poroelasticity and to formulate relevant industry norms and standards. Copyright © 2014 John Wiley & Sons, Ltd. 相似文献
6.
Shahid Ahmad 《国际地质力学数值与分析法杂志》1988,12(4):401-417
This paper presents the application of an advanced BEM for periodic and transient dynamic stress analyses of a class of geomechanics problems. For transient dynamic analysis, the problem is first solved in the Laplace transform space, which happens to be similar to the periodic dynamic analysis, and then the time domain solution is obtained by numerical inversion of transform domain solutions. The numerical implementation of the BEM used to present the results in this paper is complete and most general available to date. It is capable of treating very large, multi-layered problems by substructuring and satisfying the equilibrium and compatibilities at the interfaces. With the help of this substructuring, capability problems related to layered media and soil–structure interaction have been analysed. A number of examples are presented and through comparisons with available analytical and numerical results, the applicability and usefulness of the present analysis to real geomechanical problems are established. 相似文献
7.
In this paper, an elastostatic half-plane boundary element method (BEM) formulation was applied to analyze the stress behavior of underground pressure pipes, embedded in two-layer soils. In the use of this method, only the boundary of pipe and interfaces were required to be discretized. In this regard, first, a computer code was prepared based on a multi-region substructuring process in the BEM scheme. Then, the efficiency and applicability of the method as well as the prepared algorithm were verified by solving some practical examples and comparing the results with those of the published works. Finally, a parametric study was done to evaluate the effect of pipe depth and determine the soil stress distribution. The studies showed that the half-plane BEM was in good agreement with the existing solutions and its capability was very favorable for elastostatic problems including semi-infinite domain. It is obvious that this method can be practically used to analyze the geotechnical underground buildings in substituting the full-plane BEM formulation. 相似文献
8.
This paper presents a boundary element method (BEM) procedure for a linear elastic fracture mechanics analysis in two‐dimensional anisotropic bimaterials. In this formulation, a displacement integral equation is only collocated on the uncracked boundary, and a traction integral equation is only collocated on one side of the crack surface. A fundamental solution (Green's function) for anisotropic bimaterials is also derived and implemented into the boundary integral formulation so that except for the interfacial crack part, the discretization along the interface can be avoided. A special crack‐tip element is introduced to capture the exact crack‐tip behavior. A computer program using FORTRAN has been developed to effectively calculate the stress intensity factors of an anisotropic bimaterial. This BEM program has been verified to have a good accuracy with previous studies. In addition, a central cracked bimaterial Brazilian specimen constituting cement and gypsum is prepared to conduct the Brazilian test under diametral loading. The result shows that the numerical analysis can predict relatively well the direction of crack initiation and the path of crack propagation. Copyright © 2007 John Wiley & Sons, Ltd. 相似文献
9.
This paper presents a novel analytical solution to the transient, z‐dependent, and asymmetric problem of an infinite wellbore drilled into a fluid‐saturated porous medium. The formulations are based on Biot's linear theory of poroelasticity, in which the dependency of poroelastic field variables to spatial coordinates as well as time domain is considered in the most general form. This gives flexibility to the solution in cases that cannot be analyzed using the conventional plane strain or symmetric models. One such case is when calculating the stress variations around an inclined wellbore where the far‐field stresses are acting over a finite vertical section. The results of our solution to this case with a three‐dimensional state of far‐field stress are used to analyze the stability of inclined wellbores passing through abnormally stressed formations. The presented solution is capable of finding expressions for fundamental solutions with stress or flow boundary conditions at the wellbore. These solutions are here adopted to analyze the pressure disturbances generated by multiprobe formation tester, a standard wireline device that is designed for downhole fluid sampling as well as estimating the directional permeabilities of subsurface earth formations. A comparison with the conventional solution for the relevant pressure diffusion equation indicates that the poroelastic effect is relatively significant in relation to the transient response of the pore pressure. Further, it is shown that the finite dimensions of sink probe would, to a great extent, contribute to the formation's pore pressure variations at its immediate proximity. Copyright © 2013 John Wiley & Sons, Ltd. 相似文献
10.
The finite element method (FEM) and the boundary element method (BEM) are two well established numerical methods used for the analysis of underground openings. The advantages of both the methods are utilized by adopting FEBEM in which finite elements are coupled with boundary elements. A coupling procedure is presented in this paper. In using FEBEM, the effect of the location of interface boundary between finite element and boundary element regions, effect of Poisson's ratio and effect of stress ratio are discussed. It is shown that Poisson's ratio and stress ratio have significant effect on the accuracy of the results. Different discretization schemes are discussed to study their effect on accuracy and computation time. The use of different material properties in the FE region is presented. A comparative study is made with FEM for all the cases. It is shown that use of FEBEM is more advantageous than FEM. 相似文献
11.
An analytical solution is presented in this paper to study the time‐dependent settlement behaviour of a rigid foundation resting on a transversely isotropic saturated soil layer. The governing equations for a transversely isotropic saturated soil, within Biot's poroelasticity framework, are solved by means of Laplace and Hankel transforms. The problem is subsequently formulated in the Laplace transform domain in terms of a set of dual integral equations that are further reduced to a Fredholm integral equation of the second kind and solved numerically. The developed analytical solution is validated via comparison with the existing analytical solution for an isotropic saturated soil case, and adopted as a benchmark to examine the sensitivities of the mesh refinement and the locations of truncation boundaries in the finite element simulations using ABAQUS. Particular attention is paid to the influences of the degree of soil anisotropy, boundary drainage condition, and the soil layer thickness on the consolidation settlement and contact stress of the rigid foundation. Copyright © 2009 John Wiley & Sons, Ltd. 相似文献
12.
Practical civil engineering problems are usually formulated in an infinite half-space domain, and a selected finite domain is required to analyze the dynamic responses of a fluid-saturated porous medium by the finite element method (FEM). Devising a method to deal with the boundaries of the finite domain is the key issue for this open system. In this paper, a two-dimensional spring–dashpot artificial boundary (SDAB) for transient analysis in a fluid-saturated porous media is developed. Based on Biot’s dynamic theory of fluid-saturated porous media, the normal and tangential boundary stress formulae are deduced for out-going cylindrical body waves. The boundary stress is proportional to displacement and velocity, thus continuously distributed dashpots and springs can be placed on the artificial boundaries in the normal and tangential directions to simulate the energy absorption of the infinite media outside of the finite domain for the interior distributed source problems. In this paper, the input seismic motion can be realized by applying an equivalent load on the SDAB for the seismic scattering problems of exterior distributed sources. Numerical examples are given and the analyzed results show that the SDAB and the method of wave motion input have good stability and acceptable accuracy. 相似文献
13.
This paper presents an indirect boundary integral equation method for analysis of quasi-static, time-harmonic and transient boundary value problems related to infinite and semi-infinite poroelastic domains. The present analysis is based on Biot's theory for poroelastodynamics with fluid viscous dissipation. The solution to a given boundary value problem is reduced to the determination of intensities of forces and fluid sources applied on an auxiliary surface defined interior to the surface on which the boundary conditions are specified. A coupled set of integral equations is established to determine the intensities of forces and fluid sources applied on the auxiliary surface. The integral equations are solved numerically in the Laplace domain for quasi-static and transient problems, and in the frequency domain for time-harmonic excitations. The kernel functions of the integral equation correspond to appropriate Green's functions for a poroelastic full space or half-space. The convergence and numerical stability of the present scheme are established by considering a number of bench mark problems. The versatility of the present method is demonstrated by studying the quasi-static response of a rigid spheroidal anchor, and time-harmonic and transient response of a rigid semi-circular tunnel. 相似文献
14.
15.
This work addresses in‐plane pressure P and vertically polarized shear SV seismic wave propagation in a finite, laterally inhomogeneous, multilayered poroelastic geological region resting on the homogeneous elastic half‐space. The particular approach followed here is based on a combination of the (i) viscoelastic approximation (isomorphism) to Biot's equations of dynamic poroelasticity and on the (ii) boundary integral equation method (BIEM) using frequency‐dependent fundamental solutions of the governing wave equations. The problem is formulated under plane strain conditions and time‐harmonic motions are assumed. Validation of the viscoelastic isomorphism and verification of the BIEM is done by solution of benchmark examples. These simulation studies reveal that the proposed methodology is able to depict a sensitivity of the seismic signals recovered to the following parameters: (i) poroelastic properties of fluid saturated layers; (ii) lateral geological inhomogeneity; (iii) surface topography and (iv) frequency content and direction of the incident wave. It is concluded that the combination of viscoelastic isomorphism with BIEM software provides an effective numerical tool for evaluating site‐effect phenomena in multilayered, fluid saturated geological regions with complex geometry. The numerical results obtained demonstrate that dynamic poroelasticity interacting with other physical peculiarities of the Earth's surface layers, such as lateral heterogeneity, material properties along the wave path, local geological profile and type of elastic wave, gives rise to complex seismic signals on the free surface at the site of interest. Copyright © 2010 John Wiley & Sons, Ltd. 相似文献
16.
In this paper, we formulate a finite-element procedure for approximating the coupled fluid and mechanics in Biot’s consolidation
model of poroelasticity. We approximate the flow variables by a mixed finite-element space and the displacement by a family
of discontinuous Galerkin methods. Theoretical convergence error estimates are derived and, in particular, are shown to be
independent of the constrained specific storage coefficient, c
o
. This suggests that our proposed algorithm is a potentially effective way to combat locking, or the nonphysical pressure
oscillations, which sometimes arise in numerical algorithms for poroelasticity. 相似文献
17.
边界元法(BEM)是一种新的数值方法。由于该法可以降低所研究场问题的维数,因而边界元法较之域型法(FEM和FDM)具有应用简便、数据量少、计算快、精度高等优点。从而,用该法解决了域型法难以实现的三维地电模型视电阻率异常的计算问题。本文论述了用边界无法求解点源场地表水平和起伏下三维地电体位场问题的方法原理和数值处理技术,并给出了若干算例:导电球状矿体上视电阻率数值解与解析解结果;导电球状矿体上不同测线上视电阻率平剖曲线;三维山脊地形下导电椭球状矿体上视电阻率联剖曲线及其地形改正结果等。由本文内视电阻率的边界元法数值解与解析解结果对比的一致性和三维地形校正的显著效果,表明了边界元法是求解任意三维地电模型上位场问题的有效方法。由于用该法实现了对任意三线地质体上空间位场计算,必将推动三维电法勘探工作的开展与深入研究,无疑会对提高电法勘探的地质效果发挥重要作用。 相似文献
18.
本文用边界元法解决非稳定系统中水质预测的计算问题,建立了三维水质预测问题的边界元法计算模型,为简化计算手续、提高计算精度,讨论了Laplace变换边界元法,推广了Laplace变换边界元法中的Schapery方法。 相似文献
19.
Inglis [1] has solved the problem of distribution of stress in an elastic plate around an elliptical hole. His works clarify the role of cracks in the failure of an elastic material. However, his solution cannot be applied to saturated clay because he considers only total stresses, while, in saturated clay, the criterion of rupture should be expressed in terms of effective and not total stresses. The solution of Atkinson and Craster [2] using Biot's poroelasticity theory, shows that there is no high pore pressure in the vicinity of the crack tips for saturated clay. The major difference between this approach and the Biot's theory of is that, in saturated clay, strain is a function of the variation of the effective stress [3], while, in poroelastic media, strain is only a function of the variation of the total stress [4, Equation 2.2]. Also in their solution there is continuity between the pore fluid and the inner fluid in the crack. Their solution is valid for poroelastic media involving a movement of the pore fluid. In our solution there is no movement of the pore fluid (Undrained condition). In this paper we have solved the same problem as Inglis [1], but for the particular case of saturated clay obeying elastic law. By solving this problem we obtained the expressions for pore pressure, effective stress, total stress and displacements. The results show that not only the total stress but also the pore pressure and the effective stress are also high in the vicinity of the crack tips. A new failure criterion, based on Griffith's strain energy principle [5] and maximum tensile stress [6], valid for saturated clay is developed in this paper. Copyright © 2003 John Wiley & Sons, Ltd. 相似文献
20.
A procedure for numerical approximation to two-dimensional, hydraulically-driven fracture propagation in a poroelastic material is described. The method uses a partitioned solution procedurè to solve a finite element approximation to problems described by the theory of poroelasticity, in conjunction with a finite difference approximation for modelling fluid flow along the fracture. An equilibrium fracture model based on a generalized, Dugdale–Barenblatt concept is used to determine the fracture dimensions. An important feature is that the fracture length is a natural product of the solution algorithm. Two example problems verify the accuracy of the numerical procedure and a third example illustrates a fully-coupled simulation of fracture propagation. Photographs taken from a high-performance engineering workstation provide insight into the nature of the coupling among the physical phenomena. 相似文献