首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 890 毫秒
1.
Observations of the distribution of 241Am in the marine environment indicate that Am has a high affinity for solid surfaces. The adsorption of Am onto calcite and aragonite surfaces from seawater and related solutions has been studied, in order to establish the interaction of Am with a major component of many marine sediments. Results indicate that Am is rapidly and strongly adsorbed. This occurs even when both dissolved Am concentrations and solid to solution ratios are low. The minimum value for KD determined is 2 × 105. Measurements of reaction kinetics established that Am is adsorbed from seawater at 40 times the rate per unit surface area on synthetic aragonite that it is on synthetic calcite. Approximately 15% of the difference is attributable to epitaxial influences, with the remainder being due to enhanced site competition by Mg on calcite relative to aragonite. The adsorption rate is first order with respect to Am concentration, but follows approximately the square root of the solid surface area to solution volume ratio.Adsorption rate of Am on biogenic aragonite and Mg-calcites are, within a given particle size range, close to equal. It is not possible to normalize these adsorption rates to surface area due to the differing microporous structure of biogenic carbonates. The Am adsorption rates on a shallow water calcium carbonate-rich sediment gave results which were predicted from, its mineralogie mixture of components.  相似文献   

2.
For the Quaternary and Neogene, aragonitic biogenic and abiogenic carbonates are frequently exploited as archives of their environment. Conversely, pre‐Neogene aragonite is often diagenetically altered and calcite archives are studied instead. Nevertheless, the exact sequence of diagenetic processes and products is difficult to disclose from naturally altered material. Here, experiments were performed to understand biogenic aragonite alteration processes and products. Shell subsamples of the bivalve Arctica islandica were exposed to hydrothermal alteration. Thermal boundary conditions were set at 100°C, 175°C and 200°C. These comparably high temperatures were chosen to shorten experimental durations. Subsamples were exposed to different 18O‐depleted fluids for durations between two and twenty weeks. Alteration was documented using X‐ray diffraction, cathodoluminescence, fluorescence and scanning electron microscopy, as well as conventional and clumped isotope analyses. Experiments performed at 100°C show redistribution and darkening of organic matter, but lack evidence for diagenetic alteration, except in Δ47 which show the effects of annealing processes. At 175°C, valves undergo significant aragonite to calcite transformation and neomorphism. The δ18O signature supports transformation via dissolution and reprecipitation, but isotopic exchange is limited by fluid migration through the subsamples. Individual growth increments in these subsamples exhibit bright orange luminescence. At 200°C, valves are fully transformed to calcite and exhibit purple‐blue luminescence with orange bands. The δ18O and Δ47 signatures reveal exchange with the aqueous fluid, whereas δ13C remains unaltered in all experiments, indicating a carbonate‐buffered system. Clumped isotope temperatures in high‐temperature experiments show compositions in broad agreement with the measured temperature. Experimentally induced alteration patterns are comparable with individual features present in Pleistocene shells. This study represents a significant step towards sequential analysis of diagenetic features in biogenic aragonites and sheds light on reaction times and threshold limits. The limitations of a study restricted to a single test organism are acknowledged and call for refined follow‐up experiments.  相似文献   

3.
Free-drift dissolution data and inverse time plots were used to evaluate the stabilities of synthetic and biogenic magnesian calcites in aqueous solutions at 25°C and 1 atm total pressure. Synthetic phases with MgCO3 concentrations below 6 mole percent have stoichiometric ion activity products that are less than the value for calcite, whereas the values for phases with higher concentrations are greater than that of calcite. For synthetic phases, stability is a smooth function of composition and all phases (up to 15 mole percent MgCO3) have values of ion activity products less than that for aragonite. These results agree with those of Mucci and Morse (1984) derived from precipitation of magnesian calcites in aqueous solutions. “Average” seawater at 25° and 1 atm total pressure is supersaturated with respect to all synthetic phases in the compositional range studied.Biogenic samples are less stable than synthetic phases of similar Mg concentrations and stability is not a smooth function of composition. Biogenic materials with compositions greater than 11–13 mole percent MgCO3 have ion activity products greater than that for aragonite.The difference in stability between biogenic materials and synthetic phases is due to greater variation in chemical and physical heterogeneities found for the biogenic samples. If it is assumed that the results of the dissolution experiments reflect only differences in Gibbs free energies of formation between synthetic phases and biogenic materials of similar Mg concentration, the biogenic materials are 200–850 j/mol less stable than the synthetic phases. Only the results of synthetic dissolution experiments should be used to model the thermodynamic behavior of the magnesian calcite solid solution. The results for the synthetic phases, however, may not be appropriate to use for interpreting diagenetic reaction pathways for magnesian calcites in modern sediments, except as a basis of comparison with the behavior of natural materials.  相似文献   

4.
The dissolution kinetics of shallow water marine carbonates (low-Mg calcite, aragonite and Mg-calcites) were investigated in seawater (S = 35) at 25°C and a PCO2 of 10?2.5 atm. using the pH-stat method. Carbonate dissoluton rates (μmoles g?1 hr?1) fit the empirical kinetic expression, R = k(1 - Ω)n, where R = dissolution rate, k = rate constant, Ω = saturation state, and n = order of reaction. Reaction orders were near 2.9 for low-Mg calcites, 2.5 for aragonites and 3.4 for Mg-calcites.The rate constant, k, expressed as μmoles g?1 hr?1, varied by nearly a factor of ten for the different samples, reflecting differences in amount of reactive surface area. Reactive surface area of the biogenic phases ranged from 0.3% to 66% of the total surface area determined by the BET gas adsorption method. The discrepancy between reactive and total surface area was greatest for samples with high BET surface areas (> 1 m2 g?1) and delicate microstructures.Relative dissolution rates of the various biogenic carbonates as a function of seawater calcium carbonate ion molal product (IMP) were related to both mineral stability and grain microstructure. In seawater undersaturated with respect to aragonite, finely crystalline aragonites dissolved more rapidly than thermodynamically less stable high Mg-calcites (15–18 mole% MgCO3) with lower reactive surface areas. Therefore, under certain conditions, differences in grain microstructural complexity can override thermodynamic constraints and lead to selective dissolution of a thermodynamically more stable mineral phase.  相似文献   

5.
The cathodoluminescence analyses of the trigonal carbonates calcite and dolomite have been applied intensively in sedimentary petrology for a long time and the properties of these minerals are well-known, but much less attention has been paid to aragonite. In this study, the cathodoluminescence behaviour and the trace element composition of natural and synthetic aragonite have been studied employing trace element analyses (proton induced X-ray emission) and luminescence spectroscopy. Aragonite doped with Mn2+ has been synthesized in a NH4+–Mg2+–Ca2+–Cl− solution in contact with a CO2–H2O–NH3 atmosphere. The low effective distribution coefficients indicate a rapid growth of the crystals of millimetre size which occurred within hours or days. The natural aragonite samples contain Mn, Fe and Sr in different concentrations. The Mn-bearing aragonites exhibit a bright green luminescence which is caused by a strong emission band at 575 nm with a half-width of about 84 nm. The luminescence intensity shows a strong positive correlation with Mn in aragonite when Fe and Mn do not exceed 2000 p.p.m. The intensity is depressed if the concentration of these elements exceeds the critical values. In the shell of a recent Unio sp., the luminescence intensity deviates from the linear correlation, although the trace element contents are not too high; this is probably an effect of quenching by organic material between the crystallites of the biogenic aragonite.  相似文献   

6.
Botryoidal aragonite and its diagenesis   总被引：1，自引：0，他引：1  
Botryoidal aragonite is a spectacular growth-form occurring as mamelons, up to 100 mm in diameter. Three examples of this particular carbonate cement have been discovered in two distinct areas: in New Caledonia, small-scale mamelons have been recognized within Pleistocene reefal terraces at Ouvea, an Island of the Loyalty archipelago, and in the Red Sea, large-scale mamelons of botryoidal aragonite exist within Pleistocene reefal terraces along the Um Gheig region of the Egyptian Coast. In addition, a similar botryoidal cement, partly dolomitized but exhibiting aragonite relics, occurs within a Miocene reef in the same region. Mamelons of botryoidal aragonite are isolated and/or coalescent but grow only on fixed substrates. They occur within cavities of varied origin. Their fabrics are characterized by fans of elongate euhedral crystals of aragonite fibres. Botryoidal aragonite can be preceded or followed by other types of cements or internal sediment. Despite similar mineralogy, petrography and ultrastructure, there are differences between the fabrics of the Pleistocene botryoids from the Red Sea and Ouvea and the Miocene botryoids from the Red Sea. The former are of submarine origin as confirmed by the strontium content (8500–10,500 ppm) and isotopic composition (δ18O between -0.10 and +0.19% PDB). The latter, related to a Miocene karst, are rich in strontium (average 13,600 ppm), and have an isotopic composition (average δ18O -10.50% PDB) indicative of non-marine precipitation. Diagenesis of these botryoidal aragonites consists of slight dissolution for Pleistocene botryoids and mineralogical transformation for the Miocene botryoids. The latter exhibit the diagenetic sequence aragonite → calcite → dolomite. The aragonite to calcite transformation is a dissolution-reprecipitation process, the void distribution and size influencing the distribution and the size of the replacement calcite crystals.  相似文献   

7.
Transient aragonite seas occurred in the early Cambrian but several models suggest the late Cambrian was a time of calcite seas. Here, evidence is presented from the Andam Group, Huqf High, Oman (Gondwana) that suggests a transient Furongian (late Cambrian) aragonite sea, characterized by the precipitation of aragonite and high‐Mg calcite ooids and aragonite isopachous, fibrous, cements. Stable carbon isotope data suggest that precipitation occurred just before and during the SPICE (Steptoean Positive Carbonate Isotope Excursion). Aragonite and high‐Mg calcite precipitation can be accounted for if mMg:Ca ratios were around 1.2 given the very high atmospheric CO2 at that time and if precipitation occurred in warm waters associated with the SPICE. This, together with reported occurrences of early Furongian aragonite ooids from various locations in North America (Laurentia), suggests that aragonite and high‐Mg calcite precipitation from seawater may have been more than just a local phenomenon.  相似文献   

8.
The rate of Cd2+ sorption by calcite was determined as a function of pH and Mg2+ in aqueous solutions saturated with respect to calcite but undersaturated with respect to CdCO3. The sorption is characterized by two reaction steps, with the first reaching completion within 24 hours. The second step proceeded at a slow and nearly constant rate for at least 7 days. The rate of calcite recrystallization was also studied, using a Ca2+ isotopic exchange technique. Both the recrystallization rate of calcite and the rate of slow Cd2+ sorption decrease with increasing pH or with increasing Mg2+. The recrystallization rate could be predicted from the number of moles of Ca present in the hydrated surface layer.A model is presented which is consistent with the rates of Cd2+ sorption and Ca2+ isotopic exchange. In the model, the first step in Cd2+ sorption involves a fast adsorption reaction that is followed by diffusion of Cd2+ into a surface layer of hydrated CaCO3 that overlies crystalline calcite. Desorption of Cd2+ from the hydrated layer is slow. The second step is solid solution formation in new crystalline material, which grows from the disordered mixture of Cd and Ca carbonate in the hydrated surface layer. Calculated distribution coefficients for solid solutions formed at the surface are slightly greater than the ratio of equilibrium constants for dissolution of calcite and CdCO3, which is the value that would be expected for an ideal solid solution in equilibrium with the aqueous solution.  相似文献   

9.
Holocene meteoric dolomitization of Pleistocene limestones, North Jamaica   总被引：3，自引：0，他引：3  
Wholesale removal of the unstable carbonate phases aragonite and Mg-calcite, and precipitation of calcite and dolomite is currently taking place where phreatic waters (the modern water table) invade 120,000-year-old Pleistocene biolithites (Falmouth Formation), North Jamaica. Pleistocene rocks presently in the vadose zone are relatively unaltered, and consist of mineralogically unstable scleractinian biolithites. At the water table, a narrow zone of solution, a ‘water table cave’ is commonly encountered. Below the water table the rocks are invariably more highly altered than those above. Mg-calcites are very rare, and considerable dissolution of aragonite has commonly occurred. Dolomite occurs as 8–25 μm, subhedral to euhedral crystals replacing micrite, or precipitated as void linings. The isotopic composition of the dolomite (δO18=-1·0 %0, δC13=-8·4 %0), and its high strontium content (3000 p.p.m.) suggest precipitation as CO2-oversaturated meteoric groundwaters invade the mineralogically unstable biolithites, dissolve Mg-calcites and Sr-rich aragonites, and de-gas. Because some dolomitized rocks are enriched in magnesium relative to unaltered biolithites, addition of magnesium to the system is necessitated, and is probably derived from sea water in the mixing zone. Phreatic meteoric diagenesis is thus demonstrated to be a rapid process, and to be capable of dolomitization.  相似文献   

10.
Aragonite was converted to calcite in dilute CaCl2 fluid at temperatures ranging from 50 to 100°C. Surface areas of aragonite and calcite seed crystals were varied by over an order of magnitude to permit independent assessment of calcite nucleation and growth processes. Aragonite conversion rates were measured using isotopic attenuation of dissolved 44Ca, which was added to the fluid at the beginning of each experiment. Measured conversion rates were found to be constant with respect to time and proportional to the initial surface area of aragonite. Rates were independent of the surface area of calcite seed crystals owing to heterogeneous nucleation of calcite on aragonite during experiments. The data imply that calcite nucleates on aragonite surfaces until the level of saturation with respect to calcite reaches a critical threshold value where further nucleation is precluded. Thereafter, conversion to calcite occurs at a steady state rate consistent with aragonite dissolution at a fixed level of saturation. Aragonite converts to calcite under these conditions and in dilute fluids at rates of approximately 10 and 100 microns/yr at 25 and 100°C, respectively.  相似文献   

11.
《Chemical Geology》2003,193(1-2):93-107
In situ atomic force microscopy (AFM) experiments, scanning electron microscopy (SEM) imaging and composition analysis, and X-ray diffraction have provided information about the growth, dissolution and transformation processes promoted by Sr2+–Ca2+–CO32− aqueous solutions in contact with calcite {101̄4} surfaces. Experiments have shown a wide variety of surface phenomena, such as the influence of the Sr-bearing newly-formed surface on the subsequent growth (template effect), the growth and subsequent dissolution of surfaces and the nucleation of secondary three-dimensional nuclei on calcite surfaces. These phenomena reveal the metastability of the crystallisation system and are a consequence of the interplay between thermodynamics (the relative stability of the two calcite and aragonite structure solid solutions that can be formed), supersaturation of the aqueous solution with respect to the two possible solid solutions, and the crystallographic control of the surfaces on cation incorporation.  相似文献   

12.
Cobalt, like Mg, may cause the precipitation of aragonite rather than calcite in aqueous solutions due to the adsorption and crystal poisoning of calcite by a hydrated ion. Solutions containing NaCl and CaCl2, having the ionic strength and Ca content of seawater (35‰ salinity), were spiked with known amounts of CoCl2. Calcium carbonate was precipitated by the addition of 0.7 ml of 1 M Na2CO3. All experimental runs were made at 25°C, and all products were examined by X-ray diffraction. At low concentrations of Co (< 5·?4M) calcite and vaterite formed. At concentrations from 5·10?4 M to 2·10?3M, the products consisted of combinations of calcite and vaterite; aragonite and calcite; aragonite and vaterite; calcite, vaterite and aragonite. In solutions of 3·10?3M CoCl2, most precipitates were aragonite with only one sample containing a small amount of calcite. All precipitates from 5·10?3M CoCl2 solutions either contained aragonite or were amorphous. Solutions with concentrations of 1 · 10?2M CoCl2 produced only amorphous precipitates. All precipitates contained an amorphous violet phase, assumed to be basic cobaltous carbonate (2CoCO3·Co(OH)2·H2O).  相似文献   

13.
The solubilities of synthetic, natural and biogenic aragonite and calcite, in natural seawater of 35%. salinity at 25°C and 1 atm pressure, were measured using a closed system technique. Equilibration times ranged up to several months. The apparent solubility constant determined for calcite of 4.39(±0.20) × 10?7 mol2 kg?2 is in good agreement with other recent solubility measurements and is constant after 5 days equilibration. When we measured aragonite solubility we observed that it decreased with increasing time of equilibration. The value of 6.65(±0.12) × 10?7 mol2 kg?2, determined for equilibration times in excess of 2 months, is significantly less than that found in other recent measurements, which employed equilibration times of only a few hours to days. No statistically significant difference was found among the synthetic, natural and biogenic material. Solid to solution ratio, contamination of aragonite with up to 10 wt% calcite and recycling of the aragonite made no statistically significant difference in solubility when long equilibration times were used.Measured apparent solubility constants of aragonite and calcite are respectively 22( ± 3)% and 20( ± 2)% less than apparent solubility constants calculated from thermodynamic equilibrium constants and seawater total activity coefficients. These large differences in measured and calculated apparent solubility constants may be the result of the formation of surface layers of lower solubility than the bulk solid.  相似文献   

14.
Coupled CaCO3 dissolution-otavite (CdCO3) precipitation experiments have been performed to 1) quantify the effect of mineral coatings on dissolution rates, and 2) to explore the possible application of this coupled process to the remediation of polluted waters. All experiments were performed at 25°C in mixed-flow reactors. Various CaCO3 solids were used in the experiments including calcite, aragonite, and ground clam, mussel, and cockle shells. Precipitation was induced by the presence of Cd(NO3)2 in the inlet solution, which combined with aqueous carbonate liberated by CaCO3 dissolution to supersaturate otavite. The precipitation of an otavite layer of less than 0.01 μm in thickness on calcite surfaces decreases its dissolution rate by close to two orders of magnitude. This decrease in calcite dissolution rates lowers aqueous carbonate concentrations in the reactor such that the mixed-flow reactor experiments attain a steady-state where the reactive fluid is approximately in equilibrium with otavite, arresting its precipitation. In contrast, otavite coatings are far less efficient in lowering aragonite, and ground clam, mussel, and cockle shell dissolution rates, which are comprised primarily of aragonite. A steady-state is only attained after the precipitation of an otavite layer of 3-10 μm thick; the steady state CaCO3 dissolution rate is 1-2 orders of magnitude lower than that in the absence of otavite coatings. The difference in behavior is interpreted to stem from the relative crystallographic structures of the dissolving and precipitating minerals. As otavite is isostructural with respect to calcite, it precipitates by epitaxial growth directly on the calcite, efficiently slowing dissolution. In contrast, otavite’s structure is appreciably different from that of aragonite. Thus, it will precipitate by random three dimensional heterogeneous nucleation, leaving some pore space at the otavite-aragonite interface. This pore space allows aragonite dissolution to continue relatively unaffected by thin layers of precipitated otavite. Due to the inefficiency of otavite coatings to slow aragonite and ground aragonite shell dissolution, aragonite appears to be a far better Cd scavenging material for cleaning polluted waste waters.  相似文献   

15.
Magnesium/calcium, Sr/Ca, and Na/Ca atom ratios were determined in the calcite and aragonite regions of Mytilus edulis shells which were grown in semi-artificial ‘seawater’ solutions having varying Mg/Ca, Sr/Ca, and Na/Ca ratios. These ratios were measured by instrumental neutron activation, atomic absorption, and electron microprobe analytical techniques. Strontium/calcium ratios in both calcite and aragonite were linearly proportional to solution Sr/Ca ratios. Magnesium/calcium ratios in calcite increased exponentially when solution Mg/Ca ratios were raised above the normal seawater ratio; whereas in aragonite, Mg/Ca ratios increased linearly with increases in solution Mg/Ca ratios. Sodium/calcium and sulfur/calcium ratios in calcite covaried with Mg/Ga solution ratios. Conversely, in aragonite, Na/Ca ratios varied linearly with solution Na/Ca ratios.Magnesium is known to inhibit calcite precipitation at its normal seawater concentration. We infer from the results of the work reported here that Mytilus edulis controls the Mg activity of the outer extrapallial fluid, thus facilitating the precipitation of calcitic shell. Increases in sulfur content suggest that changes in shell organic matrix content occur as a result of environmental stress. Certain increases in Mg content may also be correlated to stress. Sodium/calcium variations, and their absolute amounts in calcite and aragonite, are best explained by assuming that a substantial amount of Na is adsorbed on the calcium carbonate crystal surface. Strontium/calcium ratios show more promise than either Mg/Ca or Na/Ca ratios as seawater paleochemistry indicators, because the Sr/Ca distribution coefficients for both aragonite and calcite are independent of seawater Ca and Sr concentrations.  相似文献   

16.
The influence of pH and concentration on boron coprecipitation by calcite were evaluated under near-equilibrium conditions at 25°C. Calcite was precipitated by adding a metastable polymorph (vaterite or aragonite) to a solution of known boron concentration. This method maintains a nearly constant solution composition during the slow conversion of the metastable polymorph to calcite.Boron uptake in calcite was found to be strongly pH-dependent, increasing two orders of magnitude from pH 8.5 to pH 10.5. Boron incorporation into calcites precipitated from vaterite-saturated solutions was five times greater than in calcites precipitated from aragonite-saturated solutions. Ostensibly, these results suggest that the calcite precipitation rates were not low enough to attain equilibrium partitioning of boron into calcite. However, scanning electron micrograph analyses showed that the prevalent crystal forms of calcite generated from aragonite and those generated from vaterite were distinctly different. The different quantities of boron incorporated into these calcites may reflect different crystal growth mechanisms, consistent with face-dependent, nonequilibrium partitioning of trace elements in calcite.At a constant pH of 9.0, boron uptake increased from less than 15 to over 290 mg/kg CaCO3 as the solution boron concentration was increased from 5 to 100 mg/kg. Our results agree with those of other investigators, despite differences in solution composition, and calcite precipitation techniques used. The agreement between the studies may be because the crystal growth morphology of the calcite was rhombohedral in both cases.  相似文献   

17.
This study presents the results from precipitation experiments carried out to investigate the partitioning of the alkaline earth cations Mg2+, Ca2+, Sr2+, and Ba2+ between abiogenic aragonite and seawater as a function of temperature. Experiments were carried out at 5 to 75 °C, using the protocol of Kinsman and Holland [Kinsman, D.J.J., Holland, H.D., 1969. The coprecipitation of cations with CaCO3 IV. The coprecipitation of Sr2+ with aragonite between 16 and 96 °C. Geochim. Cosmochim. Acta33, 1-17.] The concentrations of Mg Sr and Ba were determined in the fluid from each experiment by inductively coupled plasma-mass spectrometry, and in individual aragonite grains by secondary ion mass spectrometry. The experimentally produced aragonite grains are enriched in trace components (“impurities”) relative to the concentrations expected from crystal-fluid equilibrium, indicating that kinetic processes are controlling element distribution. Our data are not consistent with fractionations produced kinetically in a boundary layer adjacent to the growing crystal because Sr2+, a compatible element, is enriched rather than depleted in the aragonite. Element compatibilities, and the systematic change in partitioning with temperature, can be explained by the process of surface entrapment proposed by Watson and Liang [Watson, E.B., Liang, Y., 1995. A simple model for sector zoning in slowly grown crystals: implications for growth rate and lattice diffusion, with emphasis on accessory minerals in crustal rocks. Am. Mineral.80, 1179-1187] and Watson [Watson, E.B., 1996. Surface enrichment and trace-element uptake during crystal growth. Geochim. Cosmochim. Acta60, 5013-5020; Watson, E.B., 2004. A conceptual model for near-surface kinetic controls on the trace-element and stable isotope composition of abiogenic calcite crystals. Geochim. Cosmochim. Acta68, 1473-1488]. This process is thought to operate in regimes where the competition between crystal growth rate and diffusivity in the near-surface region limits the extent to which the solid can achieve partitioning equilibrium with the fluid. A comparison of the skeletal composition of Diploria labyrinthiformis (brain coral) collected on Bermuda with results from precipitation calculations carried out using our experimentally determined partition coefficients indicate that the fluid from which coral skeleton precipitates has a Sr/Ca ratio comparable to that of seawater, but is depleted in Mg and Ba, and that there are seasonal fluctuations in the mass fraction of aragonite precipitated from the calcifying fluid (“precipitation efficiency”). The combined effects of surface entrapment during aragonite growth and seasonal fluctuations in “precipitation efficiency” likely forms the basis for the temperature information recorded in the aragonite skeletons of Scleractinian corals.  相似文献   

18.
The seeded precipitation (crystal growth) of aragonite and calcite from sea water, magnesium-depleted sea water, and magnesium-free sea water has been studied by means of the steady-state disequilibrium initial rate method. Dissolved magnesium at sea water levels appears to have no effect on the rate of crystal growth of aragonite, but a strong retarding effect on that of calcite. By contrast, at levels less than about 5 per cent of the sea water level, Mg has little or no effect on calcite growth. Extended crystal growth on pure calcite seeds in sea water of normal Mg content resulted in the crystallization of magnesium calcite overgrowths, containing 7–10 mole % MgCO3 in solid solution. This suggests that the rate inhibition by Mg is due to its incorporation within the calcite crystal structure during growth, which causes the resulting magnesian calcite to be considerably more soluble than pure calcite. The standard free energy of formation of 8.5 mole% Mg calcite calculated on this assumption is in good agreement with independent estimates of magnesian calcite stability.From the work of Katz (Geochim. Cosmochim. Acta37, 1563–1586, 1973), Plummer and Mackenzie (Amer. J. Sci. 273, 515–522, 1974), and the present paper, it can be predicted that the most stable calcite in Ca-Mg exchange equilibrium with sea water contains between 2 and 7 mole%MgCO3 in solid solution. Likewise, calcites containing more than 8.5 mole% MgCO3 are less stable, and those containing less than 8.5 mole% MgCO3 are more stable than aragonite plus Ca and Mg in sea water.  相似文献   

19.
The morphology and composition of abiogenic (synthetic) aragonites precipitated experimentally from seawater and the aragonite accreted by scleractinian corals were characterized at the micron and nano scale. The synthetic aragonites precipitated from supersaturated seawater solutions as spherulites, typically 20-100 μm in diameter, with aggregates of sub-micron granular materials occupying their centers and elongate (fibrous) needles radiating out to the edge. Using Sr isotope spikes, the formation of the central granular material was shown to be associated with high fluid pH and saturation state whereas needle growth occurred at lower pH and saturation state. The granular aggregates have significantly higher Mg/Ca and Ba/Ca ratios than the surrounding fibers.Two types of crystals are identified in the coral skeleton: aggregates of sub-micron granular material and bundles of elongate (fibrous) crystals that radiate out from the aggregates. The granular materials are found in “centers of calcification” and in fine bands that transect the fiber bundles. They have significantly higher Mg/Ca and Ba/Ca ratios than the surrounding fibers.The observed relationship between seawater saturation state and crystal morphology and composition in the synthetic aragonites was used as a framework to interpret observations of the coral skeleton. We propose that coral skeletal growth can be viewed as a cyclical process driven by changes in the saturation state of the coral’s calcifying fluids. When saturation state is high, granular crystals precipitate at the tips of the existing skeletal elements forming the centers of calcification. As the saturation state decreases, aragonitic fibres grow in bundles that radiate out from the centers of calcification.  相似文献   

20.
The experimental replacement of aragonite by calcite was studied under hydrothermal conditions at temperatures between 160 and 200 °C using single inorganic aragonite crystals as a starting material. The initial saturation state and the total [Ca2+]:[CO32−] ratio of the experimental solutions was found to have a determining effect on the amount and abundance of calcite overgrowths as well as the extent of replacement observed within the crystals. The replacement process was accompanied by progressive formation of cracks and pores within the calcite, which led to extended fracturing of the initial aragonite. The overall shape and morphology of the parent aragonite crystal were preserved. The replaced regions were identified with scanning electron microscopy and Raman spectroscopy.Experiments using carbonate solutions prepared with water enriched in 18O (97%) were also performed in order to trace the course of this replacement process. The incorporation of the heavier oxygen isotope in the carbonate molecule within the calcite replacements was monitored with Raman spectroscopy. The heterogeneous distribution of 18O in the reaction products required a separate study of the kinetics of isotopic equilibration within the fluid to obtain a better understanding of the 18O distribution in the calcite replacement. An activation energy of 109 kJ/mol was calculated for the exchange of oxygen isotopes between [C16O32−]aq and [H218O] and the time for oxygen isotope exchange in the fluid at 200 °C was estimated at ∼0.9 s. Given the exchange rate, analyses of the run products imply that the oxygen isotope composition in the calcite product is partly inherited from the oxygen isotope composition of the aragonite parent during the replacement process and is dependent on access of the fluid to the reaction interface rather than equilibration time. The aragonite to calcite fluid-mediated transformation is described by a coupled dissolution-reprecipitation mechanism, where aragonite dissolution is coupled to the precipitation of calcite at an inwardly moving reaction interface.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号