首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
The Zhazixi Sb–W deposit in the Xuefeng uplift, South China, exhibits a unique metal association of W and Sb, where the W orebodies are hosted by interlayer fractures and the Sb orebodies are contained within NW-trending faults. This study proposes that the W and Sb mineralization took place in two separate periods. The mineral paragenesis of the W mineralization reveals a mass of quartz, scheelite and minor calcite. The mineral assemblage of the Sb mineralization developed after W mineralization and consists of predominantly quartz and stibnite, and small amounts of native Sb, berthierite, chalcostibnite, pyrite, and chalcopyrite. Fluid inclusions in quartz and coexisting scheelite are dominated by two-phase, liquid-rich, aqueous inclusions at room temperature. Microthermometric studies suggest that ore-forming fluids for W mineralization are characterized by moderate temperatures (170–270 °C), low salinity (3–7 wt% NaCl equiv.), low density (0.75–0.95 g/cm3), and moderate to high pressure (57.2–99.7 MPa) and these fluids experienced a cooling and dilution evolution during W mineralization. Ore-forming fluids for Sb mineralization are epithermal types with low temperatures (150–230 °C), low salinity (4–6 wt% NaCl equiv.), moderate density (0.82–0.94 g/cm3), and high pressure (42.2–122.5 MPa) and these fluids display an evident decline in homogenization temperature during Sb mineralization. Laser Raman analyses of the vapor phase indicate that the ore-forming fluids for both W and Sb mineralization contain a small amount of CO2.The ore-forming fluids for Sb mineralization are identified as predominantly originating from the continental crust, as suggested by the low 3He values (0.009 × 10−12 cc.STP/g) and 3He/4He ratios (0.002–0.056 Ra) as well as high 36Ar values (1.93 × 10−9 cc.STP/g) and 40Ar/36Ar ratios (909.5–2279.7). The source of S is identified to be the Neoproterozoic Wuqiangxi Formation, as traced by the δ34SV-CDT values of stibnite (3.1–9.4‰). The 208Pb/204Pb (37.643–40.222), 207Pb/204Pb (15.456–15.681), and 206Pb/204Pb (17.093–20.042) ratios suggest a mixture of lower crustal and supracrustal Pb sources.It is thus concluded that the ore genesis of the Zhazixi Sb–W deposit is related to the intracontinental orogeny during the early Mesozoic. Fluid mixing is considered to be the critical mechanism involved in W mineralization, whereas a fluid cooling process is responsible for Sb mineralization. Furthermore, the absence of Au is attributed to the low Σas content in Sb-mineralizing fluids.  相似文献   

2.
The geochemistry of metamorphic quartz vein formation in Barrow’s index mineral zones north of Stonehaven, Scotland, was investigated in order to assess regional fluid flow and mass transfer. Metamorphic grade in the Dalradian metasediments increases to the north–northwest away from the Highland Boundary Fault (HBF) and associated ophiolitic rocks of the Highland Border Complex (HBC), passing through the Chlorite (Chl), Biotite (Bt), Garnet (Grt), Chloritoid (Cld), and Staurolite (St) zones. Syn-metamorphic fluid infiltration at 462±8.8 Ma (Breeding et al. in Am Mineral 89:1067, 2004) produced considerable quartz veining. Vein abundance varies from about 5 to 15 volume percent of the outcrops; veins tend to be more abundant in metapelitic layers than in metapsammitic ones. Metamorphic veins are surrounded by centimeter- to decimeter-wide zones of chemical and mineralogical alteration (selvages). Porphyroblasts, particularly Bt, Grt, Cld, and St, are typically larger in selvages than in wallrocks distal to veins. The altered selvages underwent fluid-driven addition of Na, Ca, and Sr, and loss of K, Rb, and Ba. Alteration is most intense within ∼750 m of the HBF, but is still very significant at the northern end of the field area some 2 km away. Mg/FeT (FeT=total iron) was either unchanged or increased due to alteration. Silica was added at some Chl and Bt zone localities near the HBF. Pb mass transfer was variable although Pb was added at a number of locations. Rare Earth elements (REE) were generally immobile, but light REE and possibly heavy REE were lost at one field site. The gain of Na and Ca and loss of K promoted the growth of plagioclase at the expense of micas (particularly muscovite) in selvages and wallrock inclusions throughout the field area and, probably, some calcite and/or dolomite growth directly adjacent to the HBF. The Ca gains were also critical for epidote production in the Bt zone. Gains of Ca and increases in Mg/FeT helped to stabilize Grt at the expense of Cld and St in some selvages. Hornblende and cummingtonite were discovered in strongly altered metapelitic rocks at one Cld zone locality. The metasomatism puts important constraints on the processes of mass transfer and suggests two models for regional fluid flow. In the first model, fluid flow in a direction of increasing temperature downward along the HBF added Na and Ca, and removed K from the Dalradian. In the second model, fluid flow upward from the HBC transported Na and Ca into the overlying Dalradian and, at the same time, stripped out K. The latter model is favored because it can most readily account for silica addition near the HBF, but neither model can be ruled out at present. In either case, the veins represent fractures that transmitted very large time-integrated fluid fluxes of at least ∼104 m3 (fluid)/m2 (rock). Consequently, the veins were conduits for regional fluid flow that caused considerable open-system chemical and mineralogical alteration during metamorphism. Electronic Supplementary Material Supplementary material is available for this article at  相似文献   

3.
In the northern limb of the 2.06-Ga Bushveld Complex, the Platreef is a platinum group elements (PGE)-, Cu-, and Ni-mineralized zone of pyroxenite that developed at the intrusion margin. From north to south, the footwall rocks of the Platreef change from Archaean granite to dolomite, hornfels, and quartzite. Where the footwall is granite, the Sr-isotope system is more strongly perturbed than where the footwall is Sr-poor dolomite, in which samples show an approximate isochron relationship. The Nd-isotope system for samples of pyroxenite and hanging wall norite shows an approximate isochron relationship with an implied age of 2.17 ± 0.2 Ga and initial Nd-isotope ratio of 0.5095. Assuming an age of 2.06 Ga, the ɛNd values range from −6.2 to −9.6 (ave. −7.8, n = 17) and on average are slightly more negative than the Main Zone of the Bushveld. These data are consistent with local contamination of an already contaminated magma of Main Zone composition. The similarity in isotope composition between the Platreef pyroxenites and the hanging wall norites suggests a common origin. Where the country rock is dolomite, the Platreef has generally higher plagioclase and pyroxene δ 18O values, and this indicates assimilation of the immediate footwall. Throughout the Platreef, there is considerable petrographic evidence for sub-solidus interaction with fluids, and the Δ plagioclase–pyroxene values range from −2 to +6, which indicates interaction at both high and low temperatures. Whole-rock and mineral δD values suggest that the Platreef interacted with both magmatic and meteoric water, and the lack of disturbance to the Sr-isotope system suggests that fluid–rock interaction took place soon after emplacement. Where the footwall is granite, less negative δD values suggest a greater involvement of meteoric water. Consistently higher values of Δ plagioclase–pyroxene in the Platreef pyroxenites and hanging wall norites in contact with dolomite suggest prolonged interaction with CO2-rich fluid derived from decarbonation of the footwall rocks. The overprint of post crystallization fluid–rock interaction is the probable cause of the previously documented lack of correlation between PGE and sulfide content on the small scale. The Platreef in contact with dolomite is the focus of the highest PGE grades, and this suggests that dolomite contamination played a role in PGE concentration and deposition, but the exact link remains obscure. It is a possibility that the CO2 produced by decarbonation of assimilated dolomite enhanced the process of PGE scavenging by sulfide precipitation.  相似文献   

4.
Mineralogy and Petrology - In this contribution, we report new data on mineralogy, alteration patterns, geochemistry, fluid properties and source of fluids for the deposit Nová Baňa, one...  相似文献   

5.
  相似文献   

6.
Quantitative rock physics analyses were used to determine the lithology and pore fluid of a reservoir in the Niger Delta. Inaccurate prediction of lithology and pore fluid results in the inaccurate determination of other petrophysical properties and parameters such as porosity, permeability, and net pay. This research is to predict lithology and pore fluid using rock physics analysis. However, reservoir zones were also predicted. Density, compressional wave velocity, and shear wave velocity logs were used as input to calculate elastic parameters such as velocity ratio, Poisson’s ratio, and bulk modulus. The calculated velocity ratio log was used to differentiate between sand and shale. Poisson’s ratio and velocity ratio using Goodway interpretation template were carried out and used to delineate pore fluid content, gas sand, oil sand, and sandstone formation from crossplot analysis.  相似文献   

7.
The Sukari gold mine (18.8 Mt @ 2.14 g/t Au) is located 15 km west of the Red Sea coast in the southern central Eastern Desert of Egypt. The vein-type deposit is hosted in Late Neoproterozoic granite that intruded island-arc and ophiolite rock assemblages. The vein-forming process is related to overall late Pan-African shear and extension tectonics. At Sukari, bulk NE–SW strike-slip deformation was accommodated by a local flower structure and extensional faults with veins that formed initially at conditions of about 300 °C and 1.5–2 kbar. Gold is associated with sulfides in quartz veins and in alteration zones. Pyrite and arsenopyrite dominate the sulfide ore beside minor sphalerite, chalcopyrite and galena. Gold occurs in three distinct positions: (1) anhedral grains (GI) at the contact between As-rich zones within the arsenian pyrite; (2) randomly distributed anhedral grains (GII) and along cracks in arsenian pyrite and arsenopyrite, and (3) large gold grains (GIII) interstitial to fine-grained pyrite and arsenopyrite. Fluid inclusion studies yield minimum vein-formation temperatures and pressures between 96 and 188 °C, 210 and 1,890 bar, respectively, which is in the range of epi- to mesothermal hydrothermal ore deposits. The structural evolution of the area suggests a long-term, cyclic process of repeated veining and leaching followed by sealing, initiated by the intrusion of granodiorite. This cyclic process explains the mineralogical features and is responsible for the predicted gold reserves of the Sukari deposits. A characteristic feature of the Sukari gold mineralization is the co-precipitation of gold and arsenic in pyrite and arsenopyrite.Editorial handling: H. Frimmel  相似文献   

8.
Vein-type, structurally controlled Cu–Au mineralisation hosted by turbidites of late Silurian to earliest Devonian age, forms an important resource close to the eastern margin of the Cobar Basin. Here we report 103 new sulfur isotope analyses, together with homogenisation temperatures and salinity data for 545 primary two-phase fluid inclusions for the mineralised zones from the central area of the Cobar mining district. A range in δ34S values from 3.8 to 11.2‰ (average 7.9‰) is present. Sulfur is likely to have been derived from rock sulfur/sulfide in basin and basement rocks, but there may be an additional connate-derived component. Homogenisation temperatures (Th) for inclusion fluids trapped in quartz and minor calcite veins range from near 150°C to 397°C. Fluid inclusions are characterised by a low CO2 content and low, but variable salinities (2.1–9.1 wt% NaCl equivalent). Generations of inclusion fluids correspond to six paragenetic stages of vein quartz deposition and recrystallisation at the Chesney mine. Primary fluid inclusions in the first two stages were subjected to re-equilibration resulting from increased confining pressure. Their Th range (151–317°C) is considered a minimum for the temperature of these fluids. Sulfide and gold deposition at Chesney appears to be related to fluids of moderately high Th (range 270–397°C) associated with the final paragenetic stage. Th for the ore-related fluids may be close to the solvus of the H2O–NaCl–CO2 system and hence near trapping temperatures. Late-stage entry of a hot, moderately saline ore-forming fluid is implicated as the origin of the Cu–Au mineralisation. However, comparison with geochemical data for the vein-style Zn–Pb–Ag deposits at Cobar demonstrates that differences in metal content for individual zones cannot be attributed to major differences in fluid temperature or salinity. Rather, these differences are probably due to variations in source-rock reservoirs and structural pathways along which the ore-forming fluids moved.  相似文献   

9.
The Kizilcaören fluorite–barite–Rare Earth Element (REE) deposit occurs as epithermal veins and breccia fillings in altered Triassic metasandstones and Oligocene–Miocene pyroclastics adjacent to alkaline porphyritic trachyte and phonolite. This deposit is the only commercial source of REE and thorium in Turkey. Most of the fluorite–barite–REE mineralisation at Kizilcaören has been formed by hydrothermal solutions, which are thought to be genetically associated with alkaline volcanism. The occurrence of the ore minerals in vuggy cavities and veins of massive and vuggy silica indicate that the ore stage postdates hydrothermal alteration. The deposit contains evidence of at least three periods of hypogene mineralisation separated by two periods of faulting. The mineral assemblage includes fluorite, barite, quartz, calcite, bastnäsite, phlogopite, pyrolusite and hematite as well as minor amounts of plagioclase feldspar, pyrite, psilomelane, braunite, monazite, fluocerite, brockite, goethite, and rutile. Fluid inclusion microthermometry indicates that the barite formed from low salinity (0.4–9.2 equiv. wt% NaCl) fluids at low temperatures, between 105 and 230 °C, but fluorite formed from slightly higher salinity (<12.4 equiv. wt% NaCl) fluids at low and moderate temperatures, between 135–354 °C. The depositional temperature of bastnäsite is between 143–286 °C. The local coexistence of liquid- and vapour-rich inclusions suggests boiling conditions. Many relatively low-salinity (<10.0 equiv. wt% NaCl), low and moderate temperature (200–300 °C) inclusions might be the result of episodic mixing of deep-saline brines with low-salinity meteoric fluids. The narrow range of δ34S (pyrite and barite) values (2.89–6.92‰ CDT)suggests that the sulphur source of the hydrothermal fluids are the same and compatible with a volcanogenic sulphate field derived from a magmatic sulphur source.  相似文献   

10.
Experimental studies of the element distribution between carbonatite melts and hydrous fluids are hampered by the fact that neither the fluid nor the melt can be isochemically quenched in conventional high-pressure vessels. In order to overcome this problem, we used a double-capsule technique to separate immiscible fluid and melt phases during and after the runs. The inner platinum capsules were charged with carbonate mixtures (CaCO3, MgCO3 and Na2CO3) and placed inside the outer capsules charged with distilled water and diamond powder. The latter was used as an inert trap for solids precipitating from the fluid on quenching. Carbonate melt and hydrous fluid equilibrated through a small hole left in the upper end of the inner capsule. The runs were performed in rapid-quench cold-seal pressure vessels at 0.1–0.2 GPa and 700–900 °C in the two-phase (fluid + melt) stability region. Both quenched melt and quenched fluid were dissolved in dilute HCl and analysed by inductively coupled plasma atomic emission spectroscopy. The results show that under all conditions investigated, fluid/melt partition coefficients for Ca and Mg are similar and several times smaller than those for Na. At 0.1 GPa and a water/carbonatite ratio of 1 (by weight), the partition coefficients are DNa = 0.35 ± 0.02, DCa = 0.09 ± 0.02, and DMg = 0.13 ± 0.01. Between 700 and 900 °C, the effect of temperature on partitioning is negligible. However, DNa increases significantly with decreasing water/carbonatite ratio in the system. Our data show that the release of a hydrous fluid enriched in sodium and simultaneous crystallisation of calcite can transform an alkaline, vapour-saturated carbonatite melt into a body of pure calcite surrounded by zones of sodium metasomatism. Thus, it is quite possible that carbonate magmas with substantial amounts of alkalies were common parental liquids of plutonic carbonatites. Received: 6 May 1999 / Accepted: 31 August 1999  相似文献   

11.
The Tonglushan Cu–Fe deposit (1.12 Mt at 1.61% Cu, 5.68 Mt at 41% Fe) is located in the westernmost district of the Middle–Lower Yangtze River metallogenic belt. As a typical polymetal skarn metallogenic region, it consists of 13 skarn orebodies, mainly hosted in the contact zone between the Tonglushan quartz-diorite pluton (140 Ma) and Lower Triassic marine carbonate rocks of the Daye Formation. Four stages of mineralization and alterations can be identified: i.e. prograde skarn formation, retrograde hydrothermal alteration, quartz-sulphide followed by carbonate vein formation. Electron microprobe analysis (EMPA) indicates garnets vary from grossular (Ad20.2–41.6Gr49.7–74.1) to pure andradite (Ad47.4–70.7Gr23.9–45.9) in composition, and pyroxenes are represented by diopsides. Fluid inclusions identify three major types of fluids involved during formation of the deposit within the H2O–NaCl system, i.e. liquid-rich inclusions (Type I), halite-bearing inclusions (Type II), and vapour-rich inclusions (Type III). Measurements of fluid inclusions reveal that the prograde skarn minerals formed at high temperatures (>550°C) in equilibrium with high-saline fluids (>66.57 wt.% NaCl equivalent). Oxygen and hydrogen stable isotopes of fluid inclusions from garnets and pyroxenes indicate that ore-formation fluids are mainly of magmatic-hydrothermal origin (δ18O = 6.68‰ to 9.67‰, δD = –67‰ to –92‰), whereas some meteoric water was incorporated into fluids of the retrograde alteration stage judging from compositions of epidote (δ18O = 2.26‰ to 3.74‰, δD= –31‰ to –73‰). Continuing depressurization and cooling to 405–567°C may have resulted in both a decrease in salinity (to 48.43–55.36 wt.% NaCl equivalent) and the deposition of abundant magnetite. During the quartz-sulphide stage, boiling produced sulphide assemblage precipitated from primary magmatic-hydrothermal fluids (δ18O = 4.98‰, δD = –66‰, δ34S values of sulphides: 0.71–3.8‰) with an extensive range of salinities (4.96–50.75 wt.% NaCl equivalent), temperatures (240–350°C), and pressures (11.6–22.2 MPa). Carbonate veins formed at relatively low temperatures (174–284°C) from fluids of low salinity (1.57–4.03 wt.% NaCl equivalent), possibly reflecting the mixing of early magmatic fluids with abundant meteoric water. Boiling and fluid mixing played important roles for Cu precipitation in the Tonglushan deposit.  相似文献   

12.
THEJINLONGSHANGOLDOREBELTINZHEN’ANCOUN TY,SOUTHERNSHAANXIPROVINCE,ISLOCATEDINTHEWEST ERNQINLINGGOLDPROVINCE(NO.16INFIG.1;CHEN YANJINGETAL.,2004).ITWASDISCOVEREDINTHEDEVO NIANSTRATAINTHELATE1980S).ITSGEOLOGICALSETTING ANDMETALLOGENICEVOLUTIONARESIMILARTOT…  相似文献   

13.
The Luoboling Cu–Mo deposit in the Zijinshan Orefield, Fujian province, southeastern China, is a large porphyry deposit hosted by the Sifang granodiorite and the Luoboling granodiorite porphyry. The largest Cu–Mo orebody is saddle-shaped with various types of hydrothermal veinlets. Intensive hydrothermal alteration in the deposit is characterized by outward zoning from potassic, overprinted by phyllic alteration, to phyllic and alunite–dickite alteration. Based on the mineral assemblages and crosscutting relationships of veins, the ore-forming process can be divided into three stages, namely: an early-stage K-feldspar + quartz ± magnetite ± molybdenite veins associated with potassic alteration; a middle-stage quartz + molybdenite + chalcopyrite + pyrite veins in phyllic zone; and a late-stage quartz ± gypsum veins in the phyllic and alunite–dickite alteration zones. Six molybdenite separates yield a Re−Os isochron age 104.6 ± 1.0 Ma, which is identical to the age of emplacement of the Sifang and Luoboling granodiorite porphyries. Three types of fluid inclusions (FIs) were observed at the Luoboling deposit: 1) NaCl–H2O (aqueous), 2) daughter mineral-bearing and 3) CO2–H2O fluid inclusions. FIs of the early and middle stages are predominantly vapor-rich aqueous and daughter mineral-bearing inclusions, together with minor CO2-rich and liquid-rich aqueous inclusions; whereas the late-stage minerals only contain liquid-rich aqueous inclusions. Homogenization temperatures and salinities of FIs trapped in the early-stage minerals range from 420 to 540 °C and 0.4 to 62.9 wt.% NaCl equiv., respectively. FIs of the middle-stage yield homogenization temperatures of 340 to 480 °C and salinities of 0.5 to 56.0 wt.% NaCl equiv. CO2 content and the oxygen fugacity (indicated by daughter minerals) of FIs trapped in middle-stage minerals are lower than those in the early stage. The liquid-rich aqueous inclusions of the late-stage homogenize at temperatures of 140 to 280 °C, yielding salinities of 0.4 to 8.4 wt.% NaCl equiv. The minimum estimated pressures of the three stages are 30–70 MPa, 10–40 MPa and 1–10 MPa, respectively, corresponding to minimum ore-forming depths of 1–2.8 km. Fluids trapped in early, middle and late stages yield δD values of − 67‰ to − 54‰, − 54‰ to − 70‰, and − 62‰, and δ18O values of 5.4‰ to 6.7‰, 2.8‰ to 4.2‰, and − 2.1‰, respectively. Fluid boiling, which resulted in the formation of stockworks and the precipitation of sulfides, occurred in the early and middle stages. The fluids subsequently evolved into a low temperature, low salinity system in the late stage, along with an input of meteoric water. The Luoboling porphyry Cu–Mo system was developed in a transition from continental arc to back-arc extension region, which was related to the westward subduction of the paleo-Pacific plate beneath the Huanan Orogen.  相似文献   

14.
A set of sheeted quartz veins cutting 380 Ma monzogranite at Sandwich Point, Nova Scotia, Canada, provide an opportunity to address issues regarding fluid reservoirs and genesis of intrusion-related gold deposits. The quartz veins, locally with arsenopyrite (≤5%) and elevated Au–(Bi–Sb–Cu–Zn), occur within the reduced South Mountain Batholith, which also has other zones of anomalous gold enrichment. The host granite intruded (P = 3.5 kbars) Lower Paleozoic metaturbiditic rocks of the Meguma Supergroup, well known for orogenic vein gold mineralization. Relevant field observations include the following: (1) the granite contains pegmatite segregations and is cut by aplitic dykes and zones (≤1–2 m) of spaced fracture cleavage; (2) sheeted veins containing coarse, comb-textured quartz extend into a pegmatite zone; (3) arsenopyrite-bearing greisens dominated by F-rich muscovite occur adjacent the quartz veins; and (4) vein and greisen formation is consistent with Riedel shear geometry. Although these features suggest a magmatic origin for the vein-forming fluids, geochemical studies indicate a more complex origin. Vein quartz contains two types of aqueous fluid inclusion assemblages (FIA). Type 1 is a low-salinity (≤3 wt.% equivalent NaCl) with minor CO2 (≤2 mol%) and has T h = 280–340°C. In contrast, type 2 is a high-salinity (20–25 wt.% equivalent NaCl), Ca-rich fluid with T h = 160–200°C. Pressure-corrected fluid inclusion data reflect expulsion of a magmatic fluid near the granite solidus (650°C) that cooled and mixed with a lower temperature (400°C), wall rock equilibrated, Ca-rich fluid. Evidence for fluid unmixing, an important process in some intrusion-related gold deposit settings, is lacking. Stable isotopic (O, D, S) analyses for quartz, muscovite and arsenopyrite samples from vein and greisens indicate the following: (1) δ18Oqtz = +11.7‰ to 17.8‰ and δ18Omusc = +10.7‰ to +11.2‰; (2) δDmusc = −44‰ to−54‰; and (3) δ34Saspy = +7.8‰ to +10.3‰. These data are interpreted, in conjunction with fluid inclusion data, to reflect contamination of a magmatic-derived fluid (d18OH2O {\delta^{{{18}}}}{{\hbox{O}}_{{{{\rm{H}}_{{2}}}{\rm{O}}}}}  ≤ +10‰) by an external fluid (d18OH2O {\delta^{{{18}}}}{{\hbox{O}}_{{{{\rm{H}}_{{2}}}{\rm{O}}}}}  ≥ +15‰), the latter having equilibrated with the surrounding metasedimentary rocks. The δ34S data are inconsistent with a direct igneous source based on other studies for the host intrusion (d18OH2O {\delta^{{{18}}}}{{\hbox{O}}_{{{{\rm{H}}_{{2}}}{\rm{O}}}}}  = +5‰) and are, instead, consistent with an external reservoir for sulphur based on δ34SH2S data for the surrounding metasedimentary rocks. Divergent fluid reservoirs are also supported by analyses of Pb isotopes for pegmatitic K-feldspar and vein arsenopyrite. Collectively the data indicate that the vein- and greisen-forming fluids had a complex origin and reflect both magmatic and non-magmatic reservoirs. Thus, although the geological setting suggests a magmatic origin, the geochemical data indicate involvement of multiple reservoirs. These results suggest multiple reservoirs for this intrusion-related gold deposit setting and caution against interpreting the genesis of intrusion-related gold deposit mineralization in somewhat analogous settings based on a limited geochemical data set.  相似文献   

15.
A siliceous dolomitic marble xenolith within a mid-crustal Jurassic diorite exhibits mineralogical and stable isotopic evidence for infiltration of water-rich fluid. Adjacent to endoskarn which bounds the xenolith, forsterite has been replaced by clinohumite as a result of a devolatilization reaction driven by addition of aqueous fluid and extraction of heat. Isotopic compositions of calcite also record infiltration of aqueous fluid concentrated near contacts with endoskarn. Marble calcite 18OSMOW values range from +19.5 at the center of the xenolith to +12.6 adjacent to endoskarn. Calcite 13CPDB decreases sympathetically from +3.0 to +1.4. The calculated equilibrium composition of coexisting C–O–H–F fluid and a quantitative characterization of the whole-rock reaction which produced clinohumite and consumed graphite are used to place inequality contraints on the composition of the infiltrated fluid. Continnum mechanical transport models based on the resulting fluid compositions suggest that a small time-integrated Darey flux of 44 cm3/cm2 coupled with diffusive transport in the fluid was sufficient to produce both the isotopic shifts and the net-transfer reactions evidenced in the xenolith. The calculations demonstrate the importance of graphite as an indicator of time-integrated flux. The maximum possible CH4 content of the infiltrated fluid is sufficiently high to impart a 2.0 uncertainty in the 13C of the fluid. The isotopic composition of the fluid is consistent with a magmatic origin when this uncertainty is taken into account.  相似文献   

16.
The Betam gold deposit, located in the southern Eastern Desert of Egypt, is related to a series of milky quartz veins along a NNW-trending shear zone, cutting through pelitic metasedimentary rocks and small masses of pink granite. This shear zone, along with a system of discrete shear and fault zones, was developed late in the deformation history of the area. Although slightly sheared and boudinaged within the shear zone, the auriferous quartz veins are characterised by irregular walls with a steeply plunging ridge-in-groove lineation. Shear geometry of rootless intra-folial folds and asymmetrical strain shadows around the quartz lenses suggests that vein emplacement took place under a brittle–ductile shear regime, clearly post-dating the amphibolite-facies regional metamorphism. Hydrothermal alteration is pervasive in the wallrock metapelites and granite including sericitisation, silicification, sulphidisation and minor carbonatisation. Ore mineralogy includes pyrite, arsenopyrite and subordinate galena, chalcopyrite, pyrrhotite and gold. Gold occurs in the quartz veins and adjacent wallrocks as inclusions in pyrite and arsenopyrite, blebs and globules associated with galena, fracture fillings in deformed arsenopyrite or as thin, wire-like rims within or around rhythmic goethite. Presence of refractory gold in arsenopyrite and pyrite is inferred from microprobe analyses. Clustered and intra-granular trail-bound aqueous–carbonic (LCO2 + Laq ± VCO2) inclusions are common in cores of the less deformed quartz crystals, whereas carbonic (LCO2 ± VCO2) and aqueous H2O–NaCl (L + V) inclusions occur along inter-granular and trans-granular trails. Clathrate melting temperatures indicate low salinities of the fluid (3–8 wt.% NaCl eq.). Homogenisation temperatures of the aqueous–carbonic inclusions range between 297 and 323°C, slightly higher than those of the intra-granular and inter-granular aqueous inclusions (263–304°C), which are likely formed during grain boundary migration. Homogenisation temperatures of the trans-granular H2O–NaCl inclusions are much lower (130–221°C), implying different fluids late in the shear zone formation. Fluid densities calculated from aqueous–carbonic inclusions along a single trail are between 0.88 and 0.98 g/cm3, and the resulting isochores suggest trapping pressures of 2–2.6 kbar. Based on the arsenopyrite–pyrite–pyrrhotite cotectic, arsenopyrite (30.4–30.7 wt.% As) associated with gold inclusions indicates a temperature range of 325–344°C. This ore paragenesis constrains f S2 to the range of 10−10 to 10−8.5 bar. Under such conditions, gold was likely transported mainly as bisulphide complexes by low salinity aqueous–carbonic fluids and precipitated because of variations in pH and f O2 through pressure fluctuation and CO2 effervescence as the ore fluids infiltrated the shear zone, along with precipitation of carbonate and sericite. Wallrock sulphidation also likely contributed to destabilising the gold–bisulphide complexes and precipitating gold in the hydrothermal alteration zone adjacent to the mineralised quartz veins.  相似文献   

17.
  相似文献   

18.
New data on the composition of minerals in corona textures around olivine and crystal-fluid inclusions in olivine from anorthosites of the Korosten’ pluton (sampled in the Golovino quarry), Ukrainian Shield were obtained using electron and ion microprobe analyses, Raman spectroscopy, scanning electron microscopy, and cryo- and thermometry. The corona textures developed around olivine grains in contact with plagioclase and consist of inner orthopyroxene rims around olivine and outer rims of orthopyroxene-clinopyroxene-orthoclase-plagioclase symplectites. The symplectites and orthopyroxene rims most probably developed nearly simultaneously and grew in the opposite directions from the original contact of the magmatic olivine and plagioclase and replaced both olivine and plagioclase. The Al2O3 and CaO concentrations in the symplectitic orthopyroxene increase toward the contact with magmatic plagioclase, whereas the Al2O3 and CaO concentrations in the symplectitic plagioclase simultaneously decrease and its Na2O and K2O increase. Optically discernible crystalline and fluid phases of crystal-fluid inclusions in olivine were identified as pyroxenes (orthopyroxene and clinopyroxene), actinolite, Ca-and Fe, Mg-carbonates, and magnetite, along with practically pure highdensity CO2. The mineral assemblages of corona texture in the Korsten’ anorthosites were produced by autometasomatic processes at a high CO2 activity, and the local variations in the chemistry of corona minerals were likely controlled by the content and chemistry of the interstitial fluid and primary minerals. The coronas developed under subsolidus conditions, via the reaction interaction of olivine and plagioclase under the effect of an integranular fluid, with the dissolution of olivine and plagioclase at T = 980–860°C and P > 5 kbar. Inasmuch as corona textures do not occur ubiquitously in the rocks, the origin of the former was most probably controlled by the amount of the intergranular fluid.  相似文献   

19.
The Mangabeira deposit is the only known Brazilian tin mineralization with indium. It is hosted in the Paleo- to Mesoproterozoic Mangabeira within-plate granitic massif, which has geochemical characteristics of NYF fertile granites. The granitic massif is hosted in Archean to Paleoproterozoic metasedimentary rocks (Ticunzal formation), Paleoproterozoic peraluminous granites (Aurumina suite) and a granite–gneiss complex. The mineralized area comprises evolved Li-siderophyllite granite, topaz–albite granite, Li–F-rich mica greisens and a quartz–topaz rock, similar to topazite. Two types of greisens are recognized in the mineralized area: zinnwaldite greisen and Li-rich muscovite greisen, formed by metasomatism of topaz–albite granite and Li-siderophyllite granite, respectively. Cassiterite occurs in the quartz–topaz rock and in the greisens. Indium minerals, such as roquesite (CuInS2), yanomamite (InAsO4·2H2O) and dzhalindite (In(OH3)), and In-rich cassiterite, sphalerite, stannite group minerals and scorodite are more abundant in the quartz–topaz rock, and are also recognized in albitized biotite granite and in Li-rich muscovite greisen. The host rocks and mineralized zones were subsequently overprinted by the Brasiliano orogenic event.Primary widespread two-phase aqueous and rare coeval aqueous-carbonic fluid inclusions are preserved in quartz from the topaz–albite granite, in quartz and topaz from the quartz–topaz rock and in cassiterite from the Li-rich muscovite greisen. Eutectic temperatures are − 25 °C to − 23 °C, allowing modeling of the aqueous fluids in the system H2O–NaCl(–KCl). Rare three-phase H2O–NaCl fluid inclusions (45–50 wt.% NaCl equiv.) are restricted to the topaz–albite granite. Salinities and homogenization temperatures of the aqueous and aqueous-carbonic fluid inclusions decrease from the topaz–albite granite (15–20 wt.% NaCl equiv.; 400 °C–450 °C), to the quartz–topaz rock (10–15 wt.% NaCl equiv.; 250 °C–350 °C) and to the greisen (0–5 wt.% NaCl equiv.; 200 °C–250 °C). Secondary fluid inclusions have the same range of salinities as the primary fluid inclusions, and homogenize between 150 and 210 °C.The estimated equilibrium temperatures based on δ18O of quartz–mica pairs are 610–680 °C for the topaz–albite granite and 285–370 °C for the Li-rich muscovite greisens. These data are coherent with measured fluid inclusion homogenization temperatures. Temperatures estimated using arsenopyrite geothermometry yield crystallization temperatures of 490–530 °C for the quartz–topaz rock and 415–505 °C for the zinnwaldite greisens. The fluids in equilibrium with the topaz–albite granite have calculated δ18O and δD values of 5.6–7.5‰ and − 67 to − 58‰, respectively. Estimated δ18O and δD values are mainly 4.8–7.9‰ and − 60 to − 30‰, respectively, for the fluids in equilibrium with the quartz–topaz rock and zinnwaldite greisen; and 3.4–3.9‰ and − 25 to − 17‰, respectively, for the Li-rich muscovite greisen fluid. δ34S data on arsenopyrite from the quartz–topaz rock vary from − 1.74 to − 0.74‰, consistent with a magmatic origin for the sulfur. The integration of fluid inclusion with oxygen isotopic data allows for estimation of the minimum crystallization pressure at ca. 770 bar for the host topaz–albite granite, which is consistent with its evolved signature.Based on petrological, fluid inclusion and isotope data it is proposed that the greisens and related Mangabeira Sn–In mineralization had a similar hydrothermal genesis, which involved exsolution of F-rich, Sn–In-bearing magmatic fluids from the topaz–albite granite, early formation of the quartz–topaz rock and zinnwaldite greisen, progressive cooling and Li-rich muscovite greisen formation due to interaction with meteoric water. The quartz–topaz rock is considered to have formed in the magmatic-hydrothermal transition. The mineralizing saline and CO2-bearing fluids are interpreted to be of magmatic origin, based on the isotopic data and paragenesis, which has been documented as characteristic of the tin mineralization genetically related to Proterozoic within-plate granitic magmatism in the Goias Tin Province, Central Brazil.  相似文献   

20.
Our study of fluid and melt inclusions in quartz and feldspar from granite pegmatite from the Precambrian Rønne granite, Bornholm Island, Denmark revealed extremely alkali bicarbonate- and carbonate-rich inclusions. The solid phases (daughter crystals) are mainly nahcolite [NaHCO3], zabuyelite [Li2CO3], and in rare cases potash [K2CO3] in addition to the volatile phases CO2 and aqueous carbonate/bicarbonate solution. Rare melt inclusions contain nahcolite, dawsonite [NaAl(CO3)(OH)2], and muscovite. In addition to fluid and melt inclusions, there are primary CO2-rich vapor inclusions, which mostly contain small nahcolite crystals. The identification of potash as a naturally occurring mineral would appear to be the first recorded instance. From the appearance of high concentrations of these carbonates and bicarbonates, we suggest that the mineral-forming media were water- and alkali carbonate-rich silicate melts or highly concentrated fluids. The coexistence of silicate melt inclusions with carbonate-rich fluid and nahcolite-rich vapor inclusions indicates a melt-melt-vapor equilibrium during the crystallization of the pegmatite. These results are supported by the results of hydrothermal diamond anvil cell experiments in the pseudoternary system H2O–NaHCO3–SiO2. Additionally, we show that boundary layer effects were insignificant in the Bornholm pegmatites and are not required for the origin of primary textures in compositionally simple pegmatites at least.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号