共查询到20条相似文献，搜索用时 508 毫秒
1.
A fully coupled transient two‐dimensional model was employed to study fundamentals of flood‐induced surface erosion in a particle bed. The interaction of the liquid and solid phases is the key mechanism related to surface erosion. The solid phase was idealized at a particle scale by using the discrete element method. The fluid phase was modeled at a mesoscale level and solved using the lattice Boltzmann method. The fluid forces applied on the particles were calculated on the basis of the momentum the fluid exchanges with the particle. The proposed approach was used to model both single particles and particle beds subjected to Couette flow conditions. The behavior of both the single particle and the particle bed depended on particle diameter and surface shear fluid velocity. The conducted simulations show that the fluid flow profile penetrates the bed for a small distance. This penetration initiates sheet‐flow and surface erosion as the fluid interacts with particles. The effect of suppressing particle rotation on the fluid‐induced forces on the particle was also examined. Suppressing particle spinning may lead to underestimated erosion rate. Results of fluid and particle velocities were compared against experimental results and appeared to agree with the observed trends.Copyright © 2013 John Wiley & Sons, Ltd. 相似文献
2.
A novel three‐dimensional particle‐based technique utilizing the discrete element method is proposed to analyze the seismic response of soil‐foundation‐structure systems. The proposed approach is employed to investigate the response of a single‐degree‐of‐freedom structure on a square spread footing founded on a dry granular deposit. The soil is idealized as a collection of spherical particles using discrete element method. The spread footing is modeled as a rigid block composed of clumped particles, and its motion is described by the resultant forces and moments acting upon it. The structure is modeled as a column made of particles that are either clumped to idealize a rigid structure or bonded to simulate a flexible structure of prescribed stiffness. Analysis is done in a fully coupled scheme in time domain while taking into account the effects of soil nonlinear behavior, the possible separation between foundation base and soil caused by rocking, the possible sliding of the footing, and the dynamic soil‐foundation interaction as well as the dynamic characteristics of the superstructure. High fidelity computational simulations comprising about half a million particles were conducted to examine the ability of the proposed technique to model the response of soil‐foundation‐structure systems. The computational approach is able to capture essential dynamic response patterns. The cyclic moment–rotation relationships at the base center point of the footing showed degradation of rotational stiffness by increasing the level of strain. Permanent deformations under the foundation continued to accumulate with the increase in number of loading cycles. Copyright © 2011 John Wiley & Sons, Ltd. 相似文献
3.
This study utilizes the discrete element method (DEM) to present a microscopic energy monitoring approach to characterize energy dissipation mechanisms in seismically loaded soils. Numerical simulations were conducted on saturated deposits of granular particles subjected to seismic excitations, modeled using a transient fully-coupled continuum–fluid discrete-particle model. The onset of liquefaction is illustrated through macroscopic and microscopic response patterns. A novel in-depth look at the individual microscale energy components both before and after the onset of liquefaction is presented. Local microscopic energies are also presented and are compared with local macroscopic energies calculated from stress–strain loops. Finally, an assessment of existing hypotheses to quantify liquefaction potential based on energy consideration is presented through a discussion of a number of simulations that resulted in liquefaction. 相似文献
4.
Coupled bonded particle and lattice Boltzmann method for modelling fluid–solid interaction 
下载免费PDF全文
下载免费PDF全文 This paper presents a two‐dimensional coupled bonded particle and lattice Boltzmann method (BPLBM) developed to simulate the fluid–solid interactions in geomechanics. In this new technique, the bonded particle model is employed to describe the inter‐particle movement and forces, and the bond between a pair of contacting particles is assumed to be broken when the tensile force or tangential force reaches a certain critical value. As a result the fracture process can be delineated based on the present model for the solid phase comprising particles, such as rocks and cohesive soils. In the meantime, the fluid phase is modelled by using the LBM, and the immersed moving boundary scheme is utilized to characterize the fluid–solid interactions. Based on the novel technique case studies have been conducted, which show that the coupled BPLBM enjoys substantially improved accuracy and enlarged range of applicability in characterizing the mechanics responses of the fluid–solid systems. Indeed such a new technique is promising for a wide range of application in soil erosion in Geotechnical Engineering, sand production phenomenon in Petroleum Engineering, fracture flow in Mining Engineering and fracture process in a variety of engineering disciplines. Copyright © 2016 John Wiley & Sons, Ltd. 相似文献
5.
A lattice spring model is developed for coupled fluid flow and deformation problems. The model has an underlying structure consisting of particles connected by springs for the solid and fluid bubbles, connected by fluid pipelines for fluid flow. Formulations of the model to describe the coupled fluid flow and deformation behavior of a solid are derived. A few examples of consolidation problems are presented and compared with analytical solutions with good agreement being obtained, which means that the lattice model developed in this study can correctly simulate the coupled fluid flow and deformation response of a solid. 相似文献
6.
A coupled 3‐dimensional bonded discrete element and lattice Boltzmann method for fluid‐solid coupling in cohesive geomaterials 下载免费PDF全文
下载免费PDF全文 This paper presents a 3D bonded discrete element and lattice Boltzmann method for resolving the fluid‐solid interaction involving complicated fluid‐particle coupling in geomaterials. In the coupled technique, the solid material is treated as an assembly of bonded and/or granular particles. A bond model accounting for strain softening in normal contact is incorporated into the discrete element method to simulate the mechanical behaviour of geomaterials, whilst the fluid flow is solved by the lattice Boltzmann method based on kinetic theory and statistical mechanics. To provide a bridge between theory and application, a 3D algorithm of immersed moving boundary scheme was proposed for resolving fluid‐particle interaction. To demonstrate the applicability and accuracy of this coupled method, a benchmark called quicksand, in which particles become fluidised under the driving of upward fluid flow, is first carried out. The critical hydraulic gradient obtained from the numerical results matches the theoretical value. Then, numerical investigation of the performance of granular filters generated according to the well‐acknowledged design criteria is given. It is found that the proposed 3D technique is promising, and the instantaneous migration of the protected soils can be readily observed. Numerical results prove that the filters which comply with the design criteria can effectively alleviate or eliminate the appearance of particle erosion in dams. 相似文献
7.
In this article, we present a numerical method to deal with fluid–solid interactions and simulate particle–fluid systems as encountered in soils. This method is based on a coupling between two methods, now widely used in mechanics of granular media and fluid dynamics respectively: the discrete element (DE) method and the lattice Boltzmann (LB) method. The DE method is employed to model interactions between particles, whereas the LB method is used to describe an interstitial Newtonian fluid flow. The coupling presented here is a full one in the sense that particle motions act on fluid flow and reciprocally. This article presents in details each of the two methods and the principle of the coupling scheme. Determination of hydrodynamic forces and torques is also detailed, and the treatment of boundaries is explained. The coupled method is finally illustrated on a simple example of piping erosion, which puts in evidence that the combined LB–DE scheme constitutes a promising tool to study coupled problems in geomechanics. Copyright © 2011 John Wiley & Sons, Ltd. 相似文献
8.
This paper presents the computational procedures and solution strategy employed in ParCYCLIC, a parallel non‐linear finite element program developed based on an existing serial code CYCLIC for the analysis of cyclic seismically‐induced liquefaction problems. In ParCYCLIC, finite elements are employed within an incremental plasticity, coupled solid–fluid formulation. A constitutive model developed for simulating liquefaction‐induced deformations is a main component of this analysis framework. The elements of the computational strategy, designed for distributed‐memory message‐passing parallel computer systems, include: (a) an automatic domain decomposer to partition the finite element mesh; (b) nodal ordering strategies to minimize storage space for the matrix coefficients; (c) an efficient scheme for the allocation of sparse matrix coefficients among the processors; and (d) a parallel sparse direct solver. Application of ParCYCLIC to simulate 3‐D geotechnical experimental models is demonstrated. The computational results show excellent parallel performance and scalability of ParCYCLIC on parallel computers with a large number of processors. Copyright © 2004 John Wiley & Sons, Ltd. 相似文献
9.
Large-scale landslide dams can induce significant hazards to human lives by blocking the river flows and causing inundation upstream. They may trigger severe outburst flooding that may devastate downstream areas once failed. Thus, the advancement in understanding the formation of landslide dams is highly necessary. This paper presents 3D numerical investigations of the formation of landslide dams in open fluid channels via the discrete element method (DEM) coupled with computational fluid dynamics (CFD). By employing this model, the influence of flow velocity on granular depositional morphology has been clarified. As the grains settle downwards in the fluid channel, positive excess water pressures are generated at the bottom region, reducing the total forces acting on the granular mass. In the meantime, the particle sedimentations into the fluid channel with high impacting velocities can generate fluid streams to flow backwards and forwards. The coupled hydraulic effects of excess water pressure and fluid flow would entrain the solid grains to move long distances along the channel. For simulations using different flow velocities, the larger the flow velocity is, the further distance the grains can be transported to. In this process, the solid grains move as a series of surges, with decreasing deposit lengths for the successive surges. The granular flux into the fluid channel has very little influence on the depositional pattern of particles, while it affects the particle–fluid interactions significantly. The results obtained from the DEM-CFD coupled simulations can reasonably explain the mechanisms of granular transportation and deposition in the formation of landslide dams in narrow rivers. 相似文献
10.
11.
12.
Large sets of soil experimental data (field and laboratory) are becoming increasingly available for calibration of soil constitutive models. A challenging task is to calibrate a potentially large number of model parameters to satisfactorily match many data sets simultaneously. This calibration effort can be facilitated by optimization techniques. The current study aims to explore systematic approaches for exercising optimization and sensitivity analysis in the area of soil constitutive modelling. Analytical, semi‐analytical and numerical optimization techniques are employed to calibrate a multi‐surface‐plasticity sand model. Calibration is based on results from a number of drained triaxial sample tests and a dynamic centrifuge liquefaction test. The analytical and semi‐analytical approaches and associated sensitivity analysis are applied to calibrate the model non‐linear shear stress–strain response. Thereafter, model parameters controlling shear–volume coupling effects (dilatancy) are calibrated using a solid–fluid fully coupled finite element program in conjunction with an advanced numerical optimization code. A related sensitivity study reveals the challenges often encountered in optimizing highly non‐linear functions. Overall, this study demonstrates applicability and limitations of optimization techniques for constitutive model calibration. Copyright © 2003 John Wiley & Sons, Ltd. 相似文献
13.
One dimensional solutions for the classic critical upward seepage gradient/quick condition and the time rate of consolidation problems are obtained using coupled routines for the finite volume method (FVM) and discrete element method (DEM), and the results compared with the analytical solutions. The two phase flow in a system composed of fluid and solid is simulated with the fluid phase modeled by solving the averaged Navier–Stokes equation using the FVM and the solid phase is modeled using the DEM. A framework is described for the coupling of two open source computer codes: YADE-OpenDEM for the discrete element method and OpenFOAM for the computational fluid dynamics. The particle–fluid interaction is quantified using a semi-empirical relationship proposed by Ergun [12]. The two classical verification problems are used to explore issues encountered when using coupled flow DEM codes, namely, the appropriate time step size for both the fluid and mechanical solution processes, the choice of the viscous damping coefficient, and the number of solid particles per finite fluid volume. 相似文献
14.
Coupled hydro‐mechanical processes in granular media represent the interaction between solid particles movement and fluid flow during external and/or internal loading. The processes attract attention in geotechnical engineering since they cause many disasters such as landslide, slope collapse, boiling/quicksand and soil liquefaction, etc. This study presents a numerical method combining discontinuous deformation analysis (DDA) for mechanical calculation and finite element method for fluid flow simulation to model the interaction between solid particles' movement and fluid flow from microscopic point of view. The term of hydraulic pressure was newly formulated and introduced to the original DDA. The simplified examples are given to verify the new method, and the computational results correlate well with the theoretical calculations, further development is also considered. Copyright © 2010 John Wiley & Sons, Ltd. 相似文献
15.
We have developed a new approach for the numerical modeling of deformation processes combining brittle fracture and viscous flow. The new approach is based on the combination of two meshless particle-based methods: the discrete element method (DEM) for the brittle part of the model and smooth particle hydrodynamics (SPH) for the viscous part. Both methods are well established in their respective application domains. The two methods are coupled at the particle scale, with two different coupling mechanisms explored: one is where DEM particles act as virtual SPH particles and one where SPH particles are treated like DEM particles when interacting with other DEM particles. The suitability of the combined approach is demonstrated by applying it to two geological processes, boudinage, and hydrofracturing, which involve the coupled deformation of a brittle solid and a viscous fluid. Initial results for those applications show that the new approach has strong potential for the numerical modeling of coupled brittle–viscous deformation processes. 相似文献
16.
This paper presents the results of a set of numerical models focussing on structural controls on hydrothermal mineralization.We first give an overview of natural phenomena of structurally-controlled ore formation and the background theory and mechanisms for such controls. We then provide the results of a group of simple 2D numerical models validated through comparison with Cu-vein structure observed near the Shilu Copper deposit(Yangchun,Guangdong Province, China) and finally a case study of 3D numerical modelling applied to the Hodgkinson Province in North Queensland(Australia).Two modelling approaches,discrete deformation modelling and continuum coupled deformation and fluid flow modelling,are involved.The 2D model-derived patterns are remarkably consistent with the Cu-vein structure from the Shilu Copper deposit,and show that both modelling approaches can realistically simulate the mechanical behaviours of shear and dilatant fractures.The continuum coupled deformation and fluid flow model indicates that pattern of the Cuveins near the Shilu deposit is the result of shear strain localization,development of dilation and fluid focussing into the dilatant fracture segments.The 3D case-study models(with deformation and fluid flow coupling) on the Hodgkinson Province generated a number of potential gold mineralization targets. 相似文献
17.
This paper presents a unified modeling framework to investigate the impacts of debris flow on flexible barriers, based on coupled computational fluid dynamics and discrete element method (CFD‐DEM). We consider a debris flow as a mixture of fluid and particles where the fluid and particle phases are modeled by the CFD and the DEM, respectively. The fluid‐particle coupling is considered by the exchange of interaction forces between CFD and DEM calculations. The flexible barrier is simulated by the DEM as a network of bonded particles with remote interactions. The proposed coupled CFD‐DEM approach enables us to conveniently handle the complicated three‐way interactions among the fluid, the particles, and the flexible barrier structure for debris flow impact simulations. The proposed approach is first used to investigate the influences of channel inclination and the volumetric solid fraction in a debris mixture on the impact force, the resultant deformation, and the retained mass in a flexible barrier. The predictions agree well with existing experimental and numerical studies. We further examine the possible failure modes of a flexible barrier under debris flow impact and their underlying mechanisms. The performance of different components in a flexible barrier system, including single wires, double twists and cables, and their load sharing mechanisms, are carefully evaluated. The proposed unified framework offers a novel, promising pathway towards physically based, quantitative analysis and design of flexible barriers for debris flow mitigation. 相似文献
18.
A coupled discrete element model for the simulation of soil and water flow through an orifice 下载免费PDF全文
下载免费PDF全文 Soil erosion around defective underground pipes can cause ground collapses and sinkholes in urban areas. Most of these soil erosion events are caused by fluidization of the surrounding soil with subsequent washing into defective sewer pipes. In this study, this soil erosion process is simplified as the gradual washout of sand particles mixed with water through an orifice. The discrete element method is used to simulate the large deformation behavior of the sand particles, and the Darcy fluid model is coupled with this approach to simulate fluid flow through porous sand media. A coupled 3D discrete element model is developed and implemented based on this scheme. To simulate previous experiments using this coupled model considering the current computing capacity, we incorporated a ‘supply layer’ to study the continuous erosion process. The coupled model can predict the erosion flow rates of sand and water and the shape of erosion void. Thus, the model can be used as an effective and efficient tool to investigate the soil erosion process around defective pipes. Copyright © 2017 John Wiley & Sons, Ltd. 相似文献
19.
Computational fluid dynamics and discrete element method (CFD–DEM) is extended with the volume of fluid (VOF) method to model free‐surface flows. The fluid is described on coarse CFD grids by solving locally averaged Navier–Stokes equations, and particles are modelled individually in DEM. Fluid–particle interactions are achieved by exchanging information between DEM and CFD. An advection equation is applied to solve the phase fraction of liquid, in the spirit of VOF, to capture the dynamics of free fluid surface. It also allows inter‐phase volume replacements between the fluid and solid particles. Further, as the size ratio (SR) of fluid cell to particle diameter is limited (i.e. no less than 4) in coarse‐grid CFD–DEM, a porous sphere method is adopted to permit a wider range of particle size without sacrificing the resolution of fluid grids. It makes use of more fluid cells to calculate local porosities. The developed solver (cfdemSolverVOF) is validated in different cases. A dam break case validates the CFD‐component and VOF‐component. Particle sedimentation tests validate the CFD–DEM interaction at various Reynolds numbers. Water‐level rising tests validate the volume exchange among phases. The porous sphere model is validated in both static and dynamic situations. Sensitivity analyses show that the SR can be reduced to 1 using the porous sphere approach, with the accuracy of analyses maintained. This allows more details of the fluid phase to be revealed in the analyses and enhances the applicability of the proposed model to geotechnical problems, where a highly dynamic fluid velocity and a wide range of particle sizes are encountered. Copyright © 2015 John Wiley & Sons, Ltd. 相似文献
20.
Granular soils subjected to flow through their soil skeleton can show a behaviour in which fine particles migrate through the pore space between coarser particles. This process is called internal instability or suffusion. This contribution deals with the numerical analysis of the migration of fine particles in a soil column subjected to fluid flow with unresolved coupled computational fluid dynamics–discrete element method (CFD–DEM) with special regards to the used drag force correlation. The contribution investigates the influence of the Schiller–Naumann model and its extension with a voidage term on the migration behaviour of fine particles. The voidage term is further varied with a parameter, which controls the impact of the change of the void fraction on the drag force. It could be observed that the Schiller–Naumann model does not yield in a suffusive behaviour while the extended models show significant particle migration. Thereby, increasing the impact of the void fraction on the drag force results in stronger particle migration. These results reveal the need for good validation techniques. They indicate how the drag force correlation can be adapted to depict the correct particle migration behaviour. 相似文献