共查询到20条相似文献，搜索用时 234 毫秒
1.
本文面向建筑物变形监测,设计并开发了一整套可对远距离、室外成像的标志中心进行精确定位的新技术,其重点在于整像素边缘定位和数据质量控制。提出了最大梯度投影概念,以最大梯度投影替代传统梯度算子计算标志的整像素边缘,并在此基础上提出改进的边缘细化算法,同时引入曲率筛选方法,形成一整套整像素边缘定位新技术,规避室外成像环境的不确定干扰,以获取完整、准确的整像素细化边缘。在亚像素中心定位后,以统计理论为框架设计了一套数据质量控制机制,筛选并保留满足统计限值的定位结果参与最终的定位计算,有效控制了相机拍照时轻微晃动给中心定位引入的误差。在不同的自然环境、背景及摄程下进行实测,结果表明,该图像定位方法具有定位性能稳定、定位精度高、处理速度快、对成像设备要求低、对室外环境适应性强等优势。使用标配镜头的主流单反相机,200 m摄程内的标志中心定位精度在3.5 mm内,可应用于建筑物变形监测。 相似文献
2.
球形标靶的固定式扫描大点云自动定向方法 总被引：1，自引：0，他引：1
根据目前地面激光扫描数据获取速度快、数据量大、测量距离远、专用特殊材料制作的标靶识别距离近、点云定向数据处理相对滞后、自动化程度低、不能适应远距离地形测量的现状,提出了从大点云中(每站1亿点以上)自动探测远距离标靶的点云定向方法。该方法首先根据标靶控制点的工程测量坐标信息,搜索到标靶所在点云环,然后对各点云环进行扇形分区,快速探测标靶,获取标靶中心扫描坐标,最后平差计算扫描仪位置参数和姿态参数,实现点云坐标到工程测量坐标的转换。该方法在普通配置的计算机上得到实现,并成功用于远距离山区地形测量,其中定向标靶半径0.162m,标靶到扫描站距离在180~700m之间。 相似文献
3.
This research develops a clustering‐based location‐allocation method to the Capacitated Facility Location Problem (CFLP), which provides an approximate optimal solution to determine the location and coverage of a set of facilities to serve the demands of a large number of locations. The allocation is constrained by facility capacities – different facilities may have different capacities and the overall capacity may be inadequate to satisfy the total demands. This research transforms this special location‐allocation problem into a clustering model. The proposed approach has two parts: (1) the allocation of demands to facilities considering capacity constraints while minimizing the cost; and (2) the iterative optimization of facility locations using an adapted K‐means clustering method. The quality of a location‐allocation solution is measured using an objective function, which is the demand‐weighted distance from demand locations to their assigned facilities. The clustering‐based method is evaluated against an adapted Genetic Algorithm (GA) alternative, which integrates the allocation component as described above but uses GA operations to search for ‘optimal’ facility locations. Experiments and evaluations are carried out with various data sets (including both synthetic and real data). 相似文献
4.
Joni Downs Mark Horner Rebecca Loraamm James Anderson Hyun Kim Dave Onorato 《Transactions in GIS》2014,18(1):46-65
Crossing structures are an effective method for mitigating habitat fragmentation and reducing wildlife‐vehicle collisions, although high construction costs limit the number that can be implemented in practice. Therefore, optimizing the placement of crossing structures in road networks is suggested as a strategic conservation planning method. This research explores two approaches for using the maximal covering location problem (MCLP) to determine optimal sites to install new wildlife crossing structures. The first approach is based on records of traffic mortality, while the second uses animal tracking data for the species of interest. The objective of the first is to cover the maximum number of collision sites, given a specified number of proposed structures to build, while the second covers as many animal tracking locations as possible under a similar scenario. These two approaches were used to locate potential wildlife crossing structures for endangered Florida panthers (Puma concolor coryi) in Collier, Lee, and Hendry Counties, Florida, a population whose survival is threatened by excessive traffic mortality. Historical traffic mortality records and an extensive radio‐tracking dataset were used in the analyses. Although the two approaches largely select different sites for crossing structures, both models highlight key locations in the landscape where these structures can remedy traffic mortality and habitat fragmentation. These applications demonstrate how the MCLP can serve as a useful conservation planning tool when traffic mortality or animal tracking data are available to researchers. 相似文献
5.
In this article, a new morphing method is proposed for two linear features at different scales, based on their entire structures (MLBES in abbreviation). First, the bend structures of the linear features are identified by using a constrained Delaunay triangulation (CDT in abbreviation) model and represented by binary bend‐structure trees. By matching the independent bends represented by the bend‐structure trees, corresponding independent bends are obtained. These corresponding independent bends are further used to match their child bends based on hierarchical bend structures so that corresponding bends are obtained. On this basis, the two linear features are split into pairs of corresponding subpolylines by the start and end points of the corresponding bends. Second, structures of the corresponding subpolylines are identified by the Douglas‐Peucker algorithm and represented by binary line generalization trees (BLG‐trees in abbreviation). The corresponding subpolylines are split into smaller corresponding subpolylines by matching the nodes of the BLG‐trees. Third, the corresponding points are identified by using the linear interpolation algorithm for every pair of corresponding subpolylines. Finally, straight‐line trajectories are employed to generate a family of intermediate‐scale linear features. By comparison with other methods, it is found that MLBES is accurate and efficient. 相似文献
6.
赵少荣 《武汉大学学报(信息科学版)》1991,(1)
本文首先根据控制网的可靠性理论,讨论了它的设计方法;其次,在综合考虑精度、可靠性和费用准则的基础上,应用线性规划法,推导出边角网二类优化设计的通用模型;最后,通过测边网、方向网和边角同测网二类优化设计的例子,详细说明了边角网二类优化设计的一般方法。 相似文献
7.
Existing GIS‐based least‐cost routefinding approaches can in some cases be confounded by linear features in the landscape whose crossing costs are high relative to other traversing costs found throughout the landscape. Unfortunately, such high‐cost linear features are not uncommon; they frequently occur in the form of hydrologic features whose crossing costs are high relative to costs of traversing the surrounding dry land. This study (1) enumerates the situations where existing approaches can fail, (2) proposes a simple method for overcoming the limitations of the existing approaches, and (3) conducts an experiment to assess the impact of the weaknesses of existing approaches and the magnitude of the differences between the results produced by existing and revised approaches. Our results show that in mountainous terrain, linear hydrologic features with high crossing costs can have a profound impact on least‐cost routes, and the choice of solution method has equally profound impacts on the optimal route produced by the analysis. 相似文献
8.
核密度估计法支持下的网络空间POI点可视化与分析 总被引：7，自引：0，他引：7
城市空间POI点的分布模式、分布密度在基础设施规划、城市空间分析中具有重要意义,表达该特征的核密度法(kernel density estimation)由于顾及了地理学第一定律的区位影响,比其他密度表达方法(如样方密度、基于Voronoi图密度)占优。然而,传统的核密度计算方法往往基于二维延展的欧氏空间,忽略了城市网络空间中设施点的服务功能及相互联系发生于网络路径距离而非欧氏距离的事实。本研究针对该缺陷,给出了网络空间核密度计算模型,分析了核密度方法在置入网络结构中受多种约束条件的扩展模式,讨论了衰减阈值及高度极值对核密度特征表达的影响。通过实际多种POI点分布模式(随机型、稀疏型、区域密集型、线状密集型)下的核密度分析试验,讨论了POI基础设施在城市区域中的分布特征、影响因素、服务功能。 相似文献
9.
Harri Antikainen 《Transactions in GIS》2013,17(1):96-108
The conventional raster‐based least‐cost path technique, in which the connectivity graph is constructed by treating each raster cell as a node and linking each node to its adjacent neighbors, has been widely used to determine optimum paths in space. Unfortunately, paths calculated with this method are subject to distortions that stem from the imposed node‐link structure. Due to the distortions, the calculated paths may be longer than the true optimum paths in continuous space, and because of this, they may also look highly unrealistic when displayed on a map. This study examines how the quality of the raster‐based paths can be improved by using larger connectivity patterns on the one hand, and placing nodes on the sides of the cells of a raster instead of at their centers, on the other. In addition, the utility of the quadtree structure is examined. The different methods are evaluated against three different datasets using the cost distance of the calculated paths and processing times as evaluation criteria. The results indicate that raster‐based paths can be improved by using the evaluated techniques, although the degree of improvement is also dependent on the properties of the underlying cost raster. 相似文献
10.
Daniel W. Goldberg 《Transactions in GIS》2011,15(6):829-850
Address ranges used in linear interpolation geocoding often have errors and omissions that result in input address numbers falling outside of known address ranges. Geocoding systems may match these input addresses to the closest available nearby address range and assign low confidence values (match scores) to increase match rates, but little is published describing the matching or scoring techniques used in these systems. This article sheds light on these practices by investigating the need for, technical approaches to, and utility of nearby matching methods used to increase match rates in geocode data. The scope of the problem is motivated by an analysis of a commonly used health dataset. The technical approach of a geocoding system that includes a nearby matching approach is described along with a method for scoring candidates based on spatially‐varying neighborhoods. This method, termed dynamic nearby reference feature scoring, identifies, scores, ranks, and returns the most probable candidate to which the input address feature belongs or is spatially near. This approach is evaluated against commercial systems to assess its effectiveness and resulting spatial accuracy. Results indicate this approach is viable for improving match rates while maintaining acceptable levels of spatial accuracy. 相似文献
11.
Remote sensing has recently been used to map forage quality for rangeland management. However, the validity of the remotely sensed forage quality can best be assessed when it connects well with the animal unit. In this study we used the new WorldView-2 multispectral imagery to estimate and map forage quality (nitrogen concentration) as a step to explain GPS based cattle distribution in a rangeland of Southeastern Zimbabwe. Nitrogen concentration was successfully estimated and mapped (Rcv2 = 0.66, relative error = 0.13%) using partial least squares regression (PLSR). The integration of GPS based cattle distribution patterns with forage quality in a GIS showed that cattle locations significantly clustered in areas of high forage quality. The results of this study suggest that new multispectral data with unique band settings such as WorldView-2 improves the estimation and mapping of forage quality in rangelands at landscape level. In addition, our results indicate that remotely sensed forage quality can be used to explain herbivore distribution, particularly cattle grazing patterns in rangelands. 相似文献
12.
13.
Keith F. Blonquist 《ISPRS Journal of Photogrammetry and Remote Sensing》2011,66(6):919-926
Bundle adjustment is a method for simultaneously calculating both the interior and exterior orientation parameters of a set of images, and the object-space coordinates of the observed points. In the case of long focal length lenses and narrow field-of-view (FOV) imaging situations, collinearity based (perspective projection) algorithms may result in linear dependencies between parameters that cause solution instability. The use of a scaled orthographic projection model based on linear algebraic formulations was therefore adopted to reduce this risk. Using quaternions, a new mathematical model is derived that includes the partial derivatives as well as the inner constraint equations for a scaled orthographic bundle adjustment. The model was then tested using two image sets of a single, small vessel (about 6 m length) with a cube target of known dimensions at two distinct ranges; perspective solutions were also calculated for comparison. RMS residual errors of 0.74-0.78 pixels associated with the new method compare favorably to a residual error range of 0.59-0.74 pixels using a perspective bundle adjustment of the same target points. Relative precisions (as a ratio of target size) of between 1:1650 and 1:750 have been achieved at ranges of 375 m and 850 m, respectively, given comparisons with the known cube dimensions. A third image dataset consisting of a network of 16 images was solved with a 1:2200 relative precision showing the new method can successfully handle high redundancy. For the experiments that were conducted, the new method was found to produce less precise results than the perspective bundle solution for a FOV of 0.50-0.65° where the object fills 5-8% of the image. However, it was found to match the precision of the perspective model (with an uncalibrated camera) for a FOV of 0.20-0.30° where the object of interest fills only 1-2% of the full image. 相似文献
14.
M. B. Potdar 《Journal of the Indian Society of Remote Sensing》1990,18(4):65-75
A model (named ATMRAD) of radiation transfer in the Earth’s hazy atmosphere based on simplistic solution of radiation transfer equation and tropical model atmosphere is developed to estimate path radiance for correction of remote sensing multispectral data. The atmosphere is assumed to be cloud free and plane-parallel stratified with various quatities specified for 46 layers in its 100 km assumed thickness and model altitude profiles of haze aerosols specified for 23 km and 5 km visibility ranges. Altitude profiles of haze for any intermediate visibility ranges are deduced from linear mixing of the two profiles for 23 and 5 km visibilities. Deirmendjian size distribution function is assumed for aerosols. The radiation transfer calculations have been performed for 126 wavelengths in 0.25 to 3.0 μm range by considering Rayleigh and Mie Scatterings by air molecules and aerosols; and absorption by atmospheric gases. The model calculations have been carried out for path radiances in bands of IRS LISS-I sensor for different visibility ranges and solar illumination angles. 相似文献
15.
David B. Kidner J. Mark Ware rew J. Sparkes & Christopher B. Jones 《Transactions in GIS》2000,4(4):361-378
It is often assumed that real land surfaces demonstrate the statistically self-affine scaling behaviour of fractional Brownian surfaces. Tests of this assumption against empirical data, however, show many deviations. Estimates of fractal properties vary between methods and over different scale ranges. So far, this empirical evidence has come from the analysis of variograms for DEMs representing areas up to tens of kilometres in diameter. Here we report results obtained by using variograms to analyse land surface DEMs at the continental scale, with a grid resolution of 30 arc seconds. Results reveal variogram curvature and breaks of slope, but also linear sections over distance lags of hundreds of kilometres. The estimated mean fractal dimension calculated from these sections is 2.66, substantially higher for all continents at these broad scales (around 200 km) than values calculated at the erosional landscape scale (around 200 m). Thus the land surface is not self-affine, and it is not clear that it follows any simple multifractal model. At the longest wavelengths, patterns found in the variograms appear to be related to broad tectonic features of the Earth's surface. For the reader to assess their quality and generality, estimates of fractal dimension should always be accompanied by statements of the scale range covered and the goodness of fit to a log-linear relationship. 相似文献
16.
提出一种基于地理加权中心节点距离的网络社区发现算法（geographical weighted central node distance based Louvain method,GND-Louvain）。该算法扩展了传统复杂网络领域的经典社区发现方法Louvain,利用地理加权中心节点来度量社区发现过程中的空间距离关系,并将此距离衰减效应加入到距离模块度模型中,以此来计算和评估空间网络社区划分结果的质量,并探究了空间社区发现结果不稳定的原因。通过定义节点计算顺序,保证了社区发现结果的质量和稳定性。利用中国铁路网线路数据,设计了5种不同空间约束的空间社区发现对比性实验。结果证明,GND-Louvain算法的准确性最高,并且算法结果最稳定。 相似文献
17.
运用案例试验的方法,研究DOM法在土地调查成果核查中的优势,并提出三点研究结论:1)地面采样间距0.6 m左右的遥感影像性价比高。2)通过影像反差增强、边缘增强,提高影像目视质量,能有效提高核查精度。3)对核查人员进行影像判读培训,是保证核查质量的关键。 相似文献
18.
19.
针对广州地铁网络的可达性空间特征及产生的区域响应,该文基于图及可达性测度模型,结合GIS技术,探讨其时空发育状况、拓扑结构、可达性演变与区域差异特征。结果显示,广州地铁网络与商住区的空间扩张过程在时空上吻合;广州地铁网络逐步演化为回路网络,但拓扑结构存在不足;时间可达性重心从政治中心向商业中心转移,可达性从商业中心向四周区域辐射,并随距离逐渐衰弱;可达性空间模式存在着明显的区域差异,换乘站点对所在区域的可达性作用显著;潜力可达性空间分布形态呈现双中心特征,且在空间分异上与城市交通发展水平相呼应。通过对广州地铁网络进行可达性演化和空间特征分析,既为交通可达性研究提供实践经验,也为地铁网络发展决策提供理论参考。 相似文献
20.
提出了一种基于对比度增强和形态学的遥感影像道路边界与特征点提取的方法。先对遥感影像进行对比度变换增强,通过对比分析直方图均衡化和对比度分段线性增强两种方法获取的增强影像,选取区分度大的分段线性增强方法进行影像增强,然后运用数学形态法进行影像分割,实现道路和其他图像信息的有效分离。利用Krisch算子进行边缘检测提取道路的边缘信息,并基于边缘特征利用改进的Harris算子提取特征点,将提取的特征点进行拟合并用函数模型描述图像道路信息,用于后期制图中道路信息的矢量化。 相似文献