首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 686 毫秒
1.
Variations in the dayside ionosphere parameters as a result of a large-scale acoustic gravity wave (LS AGW) were studied for the 17 February 1998 substorm using the super dual auroral radar network (SuperDARN) measurements. This event was characterised by a sharp rise in the AE index with a maximum of ～900 nT. The source of the disturbance responsible for the LS AGW appears to have been located within the plasma convection throat and in the dayside cusp region. The location of the source was obtained from studies of a number of datasets including high-latitude convection maps, data from 4 DMSP satellites and networks of ground-based magnetometers. The propagation of the LS AGWs caused quasi-periodic variations in the skip distance (with an amplitude up to 220–260 km) of the ground backscatter measured by up to 6 SuperDARN radars, including Goose Bay and Kapuskasing, resulting in two large-scale travelling ionospheric disturbances (LS TIDs). The LS TIDs had wave periods of 1.5 and 2 h, a velocity of ～400 m/s for both, and wavelengths of 2200 and 2900 km, respectively. These quasi-periodic variations were also present in the peak electron density and height of the F2 layer measured by the Goose Bay ionosonde. The numerical simulation of the inverse problem show good agreement between Goose Bay radar and Goose Bay ionosonde measurements. But these LS TIDs would be difficult to deduce from the ground based ionospheric station data alone, because hmF2 variations were 10–40 km only and fOF2 variations between 10% and 20%. The results demonstrate how important SuperDARN radars can be, and that this is a more powerful technique than routine ground-based sounding for studies of weak quasi-periodic variations in the dayside subauroral ionosphere related to LS AGW.  相似文献   

2.
We examine the geomagnetic field and space plasma disturbances developing simultaneously in the solar wind, in the inner and outer magnetosphere, and on the ground from 0730 to 2030 UT on April 11, 1997 during the recovery phase of a moderate magnetic storm. The fluctuations of the solar wind density, H-component of the geomagnetic field, and power of Pc1–2 (0.1–5 Hz) waves at middle and low latitudes evolve nearly simultaneously. These fluctuations also match very well with variations of density and flux of the magnetospheric plasma at the geosynchronous orbit, and of the geomagnetic field at the geosynchronous orbit and northern polar cap. The time delay between the occurrence of disturbances in different magnetosphere regions matches the time of fast mode propagation. These disturbances are accompanied by the generation of Pc1–2 waves at mid- and high-latitude observatories in nearly the same frequency range. A scenario of the evolution of wave phenomena in different magnetospheric domains is proposed.  相似文献   

3.
The polar wind is an ambipolar outflow of thermal plasma from the high-latitude ionosphere to the magnetosphere, and it primarily consists of H+, He+ and O+ ions and electrons. Statistical and episodic studies based primarily on ion composition observations on the ISIS-2, DE-1, Akebono and Polar satellites over the past four decades have confirmed the existence of the polar wind. These observations spanned the altitude range from 1000 to ∼50,500 km, and revealed several important features in the polar wind that are unexpected from “classical” polar wind theories. These include the day–night asymmetry in polar wind velocity, which is 1.5–2.0 times larger on the dayside; appreciable O+ flow at high altitudes, where the velocity at 5000–10,000 km is of 1–4 km/s; and significant electron temperature anisotropy in the sunlit polar wind, in which the upward-to-downward electron temperature ratio is 1.5–2. These features are attributable to a number of “non-classical” polar wind ion acceleration mechanisms resulting from strong ionospheric convection, enhanced electron and ion temperatures, and escaping atmospheric photoelectrons. The observed polar wind has an averaged ion temperature of ∼0.2–0.3 eV, and a rate of ion velocity increase with altitude that correlates strongly with electron temperature and is greatest at low altitudes (<4000 km for H+). The rate of velocity increase below 4000 km is larger at solar minimum than at solar maximum. Above 4000 km, the reverse is the case. This suggests that the dominant polar wind ion acceleration process may be different at low and high altitudes, respectively. At a given altitude, the polar wind velocity is highly variable, and is on average largest for H+ and smallest for O+. Near solar maximum, H+, He+, and O+ ions typically reach a velocity of 1 km/s near 2000, 3000, and 6000 km, respectively, and velocities of 12, 7, and 4 km/s, respectively, at 10,000 km altitude. Near solar minimum, the velocity of all three species is smaller at high altitudes. Observationally it is not always possible to unambiguously separate an energized “non-polar-wind” ion such as a low-energy “cleft ion fountain” ion that has convected into a polar wind flux tube from an energized “polar-wind” ion that is accelerated locally by “non-classical” polar-wind ion acceleration mechanisms. Significant questions remain on the relative contribution between the cleft ion fountain, auroral bulk upflow, and the topside polar-cap ionosphere to the O+ polar wind population at high altitudes, the effect of positive spacecraft charging on the lowest-energy component of the H+ polar wind population, and the relative importance of the various classical and non-classical ion acceleration mechanisms. These questions pose several challenges in future polar wind observations: These include measurement of the lowest-energy component in the presence of positive spacecraft potential, definitive determination and if possible active control of the spacecraft potential, definitive discrimination between polar wind and other inter-mixed thermal ion populations, measurement of the three-dimensional ion drift velocity vector and the parallel and perpendicular ion temperatures or the detailed three-dimensional velocity distribution function, and resolution of He+ and other minor ion species in the polar wind population.  相似文献   

4.
A new empirical model for the lower ionosphere in the auroral zone, called IMAZ, has been developed, tested and refined for use in the International Reference Ionosphere (IRI) global model. Available ionospheric data have been used to train neural networks (NNs) to predict the high latitude electron density profile. Data from the European Incoherent Scatter Radar (EISCAT), based near Tromsø, Norway (69.58°N, 19.23°E), combined with rocket-borne measurements (from 61° to 69° geomagnetic latitude) make up the database of reliable D- and E-region data.NNs were trained with different combinations of the following input parameters: day number, time of day, total absorption, local magnetic K index, planetary Ap index, 10.7 cm solar radio flux, solar zenith angle and pressure surface. The output that the NNs were trained to predict was the electron density for a given set of input parameters. The criteria for determining the optimum NN are (a) the root mean square (RMS) error between the measured and predicted output values, and (b) the ability to reproduce the absorption they are meant to represent. An optimum input space was determined and then adapted to suit the requirements of the IRI community. In addition, the true quiet electron densities were simulated and added to the database, thus allowing the final model to be valid for riometer absorptions down to 0 dB.This paper discusses the development of a NN-based model for the high-latitude, lower ionosphere, and presents results from the version developed specifically for the IRI user community.  相似文献   

5.
In an attempt to quantify the extent of geochemical heterogeneity within a restricted and well dated portion of the upper mantle, 27 chromite separates from the 90 My old chromite deposits in the Mayarí–Baracoa ophiolite belt in eastern Cuba have been investigated for platinum group element (PGE) concentrations and Re–Os isotopic systematics. The samples are characterized by systematically subchondritic initial 187Os/188Os ratios and substantial heterogeneity. The initial 187Os/188Os ratios vary with chromite chemistry and with geographical distribution, reflecting differences in the Os isotopic evolution for the different upper mantle sections represented by the ophiolite. Accordingly, the Os isotope data might be divided into three groups. In the Moa–Baracoa district, where the chromite bodies are located in the mantle–crust transition zone, the calculated initial γOs values average − 0.97 ± 0.69 (n = 13). In the Sagua de Tanamo district, where chromite chemistry is highly variable and their location in relation the mantle sequence is less clear, the initial γOs values are intermediate, with an average of − 1.77 ± 0.80 (n = 7). In the Mayarí district, where the chromite bodies are located in the lower part of the mantle sequence, initial γOs values average − 2.66 ± 0.29 (n = 7). These subchondritic (i.e. negative) initial γOs values are most simply explained by Re depletion during ancient partial melting and/or melt percolation events.The Os isotope heterogeneity documented here indicates a high degree of geochemical complexity on small to intermediate length scales in the upper mantle. Our results, in combination with data on chromites from the literature, show that an “average present-day Os isotopic composition” for the hypothetical depleted MORB mantle (DMM) reservoir cannot be precisely established beyond the statement that it is “broadly chondritic”. Indeed, the upper mantle cannot be considered a sufficiently homogeneous geochemical “reservoir” to serve meaningfully as a baseline against which geochemical “anomalies” are evaluated. On the other hand, our findings are consistent with the “Statistical Upper Mantle Assemblage” or “SUMA”-concept, according to which a high level of geochemical heterogeneity is maintained in the upper mantle at all relevant length scales, as a result of the plate-tectonic cycle and intra-mantle processes such as melt-migration and metasomatism.  相似文献   

6.
This paper reports ten new surface heat-flow density (qs) values for central and southern Israel (central Sinai Microplate), whose crystalline crust and lithosphere formed as part of the Neoproterozoic Arabian-Nubian Shield. Heat flow was calculated in Mesozoic sediments using the classical approach of heat-flow determination by implementing in the analysis high-precision continuous temperature logs obtained in air- and/or water-filled boreholes. Thermal conductivity (TC) measured for a large suite of rock samples of lithotypes making up the sequence was assigned to temperature gradients in intervals for which the lithology was known. The heat-flow values obtained for different depth intervals in a borehole as well as the average values for the individual borehole locations cover a narrow range, attesting heat-conduction conditions. A steady-state thermal model along an E–W crustal cross section through the area shows that the observed systematic spatial distribution of the qs values, which range between 50 and 62 mW m−2, can primarily be explained by variations in the thickness of the upper crust and in the ratio between sedimentary and crystalline rocks therein. Given the time lapse of thermal heat transfer through the lithosphere, the qs data monitor the crustal thermal conditions prior to rift- and plume-related lithospheric thermal perturbations that have started in the larger area ca. 30 Ma ago. Observed and modeled qs display the best fit for a pre-Oligocene lithosphere–asthenosphere boundary (LAB) at ∼150 km, which would be at the upper end of LAB depths determined from stable areas of the Arabian Shield (150–120 km) not affected by the young, deep-seated thermal processes that have caused a further uprise of the LAB. Our data imply or predict that the surface heat flow of the Sinai Microplate generally tends to increase along N–S and W–E traverses, from ∼45–50 mW m−2 to ∼55–60 mW m−2. Surface heat flows on the order of 55–60 mW m−2 may be common in the northern Arabian Shield, where it exhibits typical lithosphere structure and composition and is unaffected by young heating processes, compared to values of ≤45 mW m−2 recently determined in the southern Arabian Plate for the Arabian Platform.  相似文献   

7.
We present a 10Be production-rate calibration derived from an early Holocene debris-flow deposit at about 1000 m above sea level in the central Southern Alps, New Zealand, in the mid-latitude Southern Hemisphere. Ten radiocarbon ages on macrofossils from a soil horizon buried by the deposit date the deposit to 9690 ± 50 calendar years before AD2008. Surface 10Be concentrations of seven large boulders partially embedded in the stable surface of the deposit are tightly distributed, yielding a standard deviation of ～2%. Conversion of the 10Be measurements to sea level/high-latitude values using each of five standard scaling methods indicates 10Be production rates of 3.84 ± 0.08, 3.87 ± 0.08, 3.83 ± 0.08, 4.15 ± 0.09, and 3.74 ± 0.08 atoms g?1 a?1, relative to the ‘07KNSTD’ 10Be AMS standard, and including only the local time-integrated production-rate uncertainties. When including a sea level high-latitude scaling uncertainty the overall error is ～2.5% (1σ) for each rate. To test the regional applicability of this production-rate calibration, we measured 10Be concentrations in a set of nearby moraines deposited before 18 060 ± 200 years before AD2008. The 10Be ages are only consistent with minimum-limiting 14C age data when calculated using the new production rates. This also suggests that terrestrial in situ cosmogenic-nuclide production did not change significantly from Last Glacial Maximum to Holocene time in New Zealand. Our production rates agree well with those of a recent calibration study from northeastern North America, but are 12–14% lower than other commonly adopted values. The production-rate values presented here can be used elsewhere in New Zealand for rock surfaces exposed during or since the last glacial period.  相似文献   

8.
This study examines the recent evolution of the Greenland ice sheet and its six major drainage basins. Based on laser altimetry data acquired by the Ice, Cloud and Land Elevation Satellite (ICESat), covering the period September–November 2003 to February–March 2008, ice surface height changes and their temporal variations were inferred. Our refined repeat track analysis is solely based on ICESat data and is independent of external elevation models, since it accounts for both ice height changes and the local topography. From the high resolution ice height change pattern we infer an overall mean surface height trend of −0.12 ± 0.006 m yr−1. Furthermore, the largest changes could be identified at coastal margins of the ice sheet, exhibiting rates of more than −2 m yr−1. The total ice volume change of the entire ice sheet amounts to −205.4 ± 10.6 km3 yr−1. In addition, we assessed mass changes from 78 monthly Gravity Recovery and Climate Experiment (GRACE) solutions. The Release-04 gravity field solutions of GeoForschungsZentrum Potsdam cover the period between August 2002 and June 2009. We applied an adjusted regional integration approach in order to minimize the leakage effects. Attention was paid to an optimized filtering which reduces error effects from different sources. The overall error assessment accounts for GRACE errors as well as for errors due to imperfect model reductions. In particular, errors caused by uncertainties in the glacial isostatic adjustment models could be identified as the largest source of errors. Finally, we determined both seasonal and long-term mass change rates. The latter amounts to an overall ice mass change of −191.2 ± 20.9 Gt yr−1 corresponding to 0.53 ± 0.06 mm yr−1 equivalent eustatic sea level rise. From the combination of the volume and mass change estimates we determined a mean density of the lost mass to be 930 ± 11 kg m−3. This value supports our applied density assumption 900 ± 30 kg m−3 which was used to perform the volume–mass-conversion of our ICESat results. Hence, mass change estimates from two independent observation techniques were inferred and are generally in good agreement.  相似文献   

9.
The Central American volcanic arc supplies a significant proportion of the persistent annual global sulphur dioxide emissions from volcanoes. In November/December 2003, we completed a survey of the arc section from Mombacho to San Cristóbal in Nicaragua recording individual mean fluxes of 800, 530 and 220 Mg day− 1 in the plumes from San Cristóbal, Telica and Masaya, respectively. An assessment of fluxes published since 1997 along the entire Central America arc yields a mean total arc flux of SO2 of 4360 Mg day− 1 or 8–16% of the annual estimated global volcanic SO2 flux to the troposphere. New field data shows that Masaya volcano continues to show stable HCl/SO2 and HF/SO2 ratios, suggesting a sustained flux of these components of ∼ 220 and 30 Mg day− 1, respectively (1997 to 2004). Masaya's plume composition also appears to have been stable, between 2001 and 2003, with respect to all the particulate species measured, with significant fluxes of SO42− (4 Mg day− 1), Na+ (0.9–1.3 Mg day− 1) and K+ (0.7 Mg day− 1). Extrapolating the Masaya plume species ratios to the entire Central American arc gives mean HCl and HF fluxes of 1300 and 170 Mg day− 1 and a particulate sulphate flux of 40 Mg day− 1 for 1997 to 2004, although without further understanding of the degassing processes and sources at depth of these different volatiles, these arc-scale estimates should be treated with caution. Combining our arc scale mean SO2 flux with published measurements of volcanic gas compositions with respect to CO2 and H2O allows us to estimate mean CO2 fluxes of 4400–9600 Mg day− 1 and H2O fluxes of 70,000–78,000 Mg day− 1 for the arc. Preliminary comparisons of these estimates of outgassing rates with published volatile input fluxes into the Central American subduction zone, suggest that Cl is more efficiently recycled through the subduction zone than CO2. The results for H2O are inconclusive.  相似文献   

10.
The Chinese Continental Scientific Drilling (CCSD) project is located at the Sulu ultrahigh-pressure metamorphic (UHPM) belt. It offers a unique opportunity for studying the radiogenic heat production of both shallower and deeper rocks. Based on the concentrations of radiogenic elements U, Th and K on 349 samples from main hole of CCSD (CCSD MH), pilot holes and exposures, we determined radiogenic heat productions of all major rock types in the Sulu UHPM belt. Results show the mean values of orthogneiss and paragneiss are respectively 1.65 ± 0.81 and 1.24 ± 0.61 µW m? 3. Due to different composition and grade of retrogressive metamorphism, the eclogites display significant scatter in radiogenic heat production, ranging from 0.01 to 2.85 µW m? 3, with a mean of 0.44 ± 0.55 µW m? 3. The radiogenic heat production in ultramafic rocks also varies within a large range of 0.02 to 1.76 µW m? 3, and the average turns out to be 0.18 ± 0.31 µW m? 3. Based on the measurements and crustal petrologic model, the vertical distribution model of heat production in Sulu crust is established. The resulting mean heat production (0.76 µW m? 3) contributes 24 mW m? 2 to the surface heat flow. 1-D thermal model indicates that the temperature at the Moho reaches above 750 °C, and the thermal thickness of the lithosphere is ~ 75 km, in good agreement with the geophysical results. The high teat flow (~ 75 mW m? 2) together with thin lithosphere presents strong support for the extension events during the late Cretaceous and Cenozoic.  相似文献   

11.
It has long been recognized that the Kii Peninsula in the southwest Japan arc is peculiar in a non-volcanic region, indicated by the presence of high temperature hot springs, high terrestrial heat flow and high 3He content in hot spring gases. Geophysical and geochemical studies were carried out to understand the geotectonic environment in the southern part of the Kii Peninsula. Most of the measured 3He / 4He ratios are similar or higher than air, indicating wide spread incorporation of mantle-derived helium into meteoric water. A region with rather high 3He / 4He ratios (> 4 RA) on the west side of the Omine Mountains coincides with the occurrence of high temperature hot springs. A deep crustal resistivity structure across the Omine Mountains was imaged by wide-band magnetotelluric soundings. A 2-D inversion with N–S strike using both TM and TE modes reveals two conductors, one in the upper (3–7 km depth) and the other in lower crust (25–35 km depth) to the west of the Omine Mountains. The distribution of microearthquakes and low-frequency tremors, and the existence of seismic reflectors indicate that the large conductor in the lower crust is related to aqueous fluids derived from the Philippine Sea plate. The upper-crustal conductive zone may also reflect the aqueous fluids trapped in the upper crust, which are presumably derived from the subducting slab. Considering the occurrence of seismic events in the subducting slab beneath the southern Kii Peninsula, the aqueous fluids generated by dehydration of the slab mantle could plausibly include MORB-type helium derived from the residual lithospheric mantle. Therefore, the high temperature hot springs and high 3He emanations in hot spring gases and other geotectonic events in the southern Kii Peninsula may be due to heat flux and mantle-derived helium discharged from aqueous fluid in the upper crust.  相似文献   

12.
The UV camera is becoming an important new tool in the armory of volcano geochemists to derive high time resolution SO2 flux measurements. Furthermore, the high camera spatial resolution is particularly useful for exploring multiple-source SO2 gas emissions, for instance the composite fumarolic systems topping most quiescent volcanoes. Here, we report on the first SO2 flux measurements from individual fumaroles of the fumarolic field of La Fossa crater (Vulcano Island, Aeolian Island), which we performed using a UV camera in two field campaigns: in November 12, 2009 and February 4, 2010. We derived ~ 0.5 Hz SO2 flux time-series finding fluxes from individual fumaroles, ranging from 2 to 8.7 t d?1, with a total emission from the entire system of ~ 20 t d?1 and ~ 13 t d?1, in November 2009 and February 2010 respectively. These data were augmented with molar H2S/SO2, CO2/SO2 and H2O/SO2 ratios, measured using a portable MultiGAS analyzer, for the individual fumaroles. Using the SO2 flux data in tandem with the molar ratios, we calculated the flux of volcanic species from individual fumaroles, and the crater as a whole: CO2 (684 t d?1 and 293 t d?1), H2S (8 t d?1 and 7.5 t d?1) and H2O (580 t d?1 and 225 t d?1).  相似文献   

13.
The propagation features of nighttime whistlers to low-latitude station, Suva (−18.2°, 178.3°, geomag. lat. −22.1°, geomag. long. 253.5°, L=1.15), Fiji, from preliminary observations made during the period from September 2003–2005, are reported. The observations of ELF–VLF signals commenced in September 2003 using the VLF set-up of World Wide Lightning Location Network at our station. The whistlers were observed during the severe magnetic storm of 20–22 November 2003 and moderate magnetic storm of 17–19 July 2005. A whistler with dispersion D=12.7 s1/2 occurred on 22 November at 00:11 h LT. On 20 July at 01:00 h LT, a short whistler with dispersion D=20.9 s1/2 and two whistler events having two-component whistlers with D=15.8, 16.7 s1/2 and 16.7, 17.3 s1/2 were observed. Non-ducted pro-longitudinal mode of the whistler propagation supported by negative latitudinal electron density gradients in the ionosphere that are enhanced by magnetic storms, seems most likely mode of propagation for the whistlers with dispersion of 12.7–17.3 s1/2 to this low-latitude station.  相似文献   

14.
This study seeks to establish a new system characteristic describing dayside convective flows in the coupled magnetosphere–ionosphere: the low-pass filter function through which interplanetary magnetic field (IMF) fluctuations are processed as they are communicated from the magnetopause to the high-latitude ionosphere near local noon. In doing so, this study confirms that variations in the ionospheric flows at high-latitudes near local noon are well correlated with variations in the IMF orientation and magnitude on short timescales. We construct the filter function by comparing time series of the ionospheric equivalent flows at a fixed location at magnetic local noon and 80° latitude with time series of the IMF. The coherence spectra of these two parameters—averaged over 330 h of comparison—indicate that there is a low-pass cutoff in the ionospheric response to IMF driving at a periods shorter than 20 min (frequencies higher than 0.8 mHz). When there is sufficient power in the IMF fluctuations, this cutoff is relatively sharp—the coherence drops by roughly a factor of three between the periods 32 and 21 min (0.5 and 0.8 mHz). The results also show that on average the coherence between the east–west component of the equivalent flows and IMF By tends to be less than the coherence between the north–south component of the equivalent flows and IMF Bz.  相似文献   

15.
The results from the numerical calculations of the global distribution of topside ionospheric parameters such as H+ ions and ion and electron temperatures up to 1500 km height are presented for equinoctial conditions at solar minimum. Calculations are carried out using the Global Self-consistent Model of Thermosphere, Ionosphere and Protonosphere (GSM TIP) developed in WD IZMIRAN, and using a new calculation block for electric fields due to dynamo and of magnetospheric origin. A comparison of two sets of calculations of magnetospheric convection electric field for a given potential difference is carried out, one through polar caps and other through field aligned currents of first zone. It is shown that the distribution of the electric potential obtained through field aligned currents of first zone is more self-consistent than that through polar caps. The light ion trough in H+ ions is deeper and occupies larger region for the potential difference through polar cap. For a given potential difference through field aligned current, at 1500 km, the maximum ion temperature is 150 K higher, minimum ion temperature is 200 K lower and maximum electron temperature is 100 K higher than those obtained for the same potential difference through polar caps. It is concluded that for modeling the electric field of magnetospheric origin, it is necessary to use the potential difference through field aligned current of first zone instead of through polar caps.  相似文献   

16.
The Minas Basin, the eastern end of the Bay of Fundy, is well known for its high tide ranges and strong tidal currents, which can be exploited to extract electricity power. The properties of the tidally-induced sediment transport in the Minas Basin, where significant changes in tidal processes may occur due to a recently proposed tidal power project, have been studied with a three-dimensional hydrodynamic model, an empirical bed load sediment transport model and surface sediment concentrations derived from the remotely-sensed images. The hydrodynamic model was evaluated against independent observational data, which include tidal elevation, tidal current (in the full water column and bottom layer), residual current profile and tidal asymmetry indicators. The evaluation shows that the model is in good agreement with the observations.The sediment transport includes two components, bed load and suspended particulate load. The bed load is calculated using the modelled bottom shear stress and the observed grain size data. The estimated features of bed load transport roughly agree with the observed patterns of the erosion and deposition in the Minas Basin and Cobequid Bay. The transport of the suspended load is estimated using the modelled velocity fields and the surface sediment concentration derived from remote-sensing images. The comparisons between the modelled results and the limited observations illustrate that the observed directions of suspended sediment transport are basically reproduced by the model. The modelled net suspended sediment input into the Minas Basin through Minas Passage is 2.4×106 m3 yr?1, which is comparable to the observed value of 1.6×106 m3 yr?1.The variations of the bed load and the suspended load in space and time are also presented. The total net transport, defined as the mean value of the sum of bed and suspended load transports during the tidal cycle, shows strong spatial variability. The magnitude of the transport flux ranges from 0.1 to 0.2 kg m?1 s?1 in Minas Channel and Minas Passage, 0.1 kg m?1 s?1 in Cobequid Bay, to 0.01 kg m?1 s?1 in the central Minas Basin and Southern Bight. In Minas Channel, the sediment transport follows the structure of the tidal residual circulation, which features a large anticlockwise gyre. The sediment in Minas Passage moves eastward and deposits into the central Minas Basin. However, the sediment from the eastern part of the Basin moves westward and deposits in the central Minas Basin as well. In the Cobequid Bay, sediment moves eastward and deposits in the upper bay.  相似文献   

17.
We used bottomside ground observations and topside sounding data from the Intercosmos-19 satellite to study a Travelling Ionospheric Disturbance (TID) that occurred in response to Large-Scale Internal Gravity Wave (LSIGW) propagation during a substorm on November 30, 1979. We built a global scheme for the wavelike ionospheric variations during this medium substorm (AEmax ～800 nT). The area where the TID was observed looks like a wedge since it covers the nighttime hours at subauroral latitudes but contracts to a ～02 h local sector at low latitudes. The ionospheric response is strongly asymmetric because the wedge area and the TID amplitude are larger in the winter hemisphere than in the summer hemisphere. Clear evidence was obtained indicating that the more powerful TID from the Northern (winter) hemisphere propagated across the equator into the low latitude Southern (summer) hemisphere. Intercosmos-19 observations show that the disturbance covers the entire thickness of the topside ionosphere, from hmF2 up to at least the 1000 km satellite altitude at post-midnight local times. F-layer lifting reached ～200 km, Ne increases in the topside ionosphere by up to a factor of ～1.9 and variations in NmF2 of both signs were observed. Assumptions are made concerning the reason for the IGW effect at high altitudes in the topside ionosphere. The relationship between TID parameters and source characteristics determined from a global network of magnetometers are studied. The role of the dayside cusp in the generation of the TID in the daytime ionosphere is discussed. The magnetospheric electric field effects are distinguished from IGW effects.  相似文献   

18.
Tektites are terrestrial natural glasses produced during a hypervelocity impact of an extraterrestrial projectile onto the Earth's surface. The similarity between the chemical and isotopic compositions of tektites and terrestrial upper continental crust implies that the tektites formed by fusion of such target rock. Tektites are among the driest rocks on Earth. Although volatilization at high temperature may have caused this extreme dryness, the exact mechanism of the water loss and the behavior of other volatile species during tektite formation are still debated. Volatilization can fractionate isotopes, therefore, comparing the isotope composition of volatile elements in tektites with that of their source rocks may help to understand the physical conditions during tektite formation.For this study, we have measured the Zn isotopic composition of 20 tektites from four different strewn fields. Almost all samples are enriched in heavy isotopes of Zn compared to the upper continental crust. On average, the different groups of tektites are isotopically distinct (listed from the isotopically lightest to the heaviest): Muong-Nong type indochinites (δ66/64Zn = 0.61 ± 0.30‰); North American bediasites (δ66/64Zn = 1.61 ± 0.49‰); Ivory Coast tektites (δ66/64Zn = 1.66 ± 0.18‰); the Australasian tektites (others than the Muong Nong-type indochinites) (δ66/64Zn = 1.84 ± 0.42‰); and Central European moldavites (δ66/64Zn = 2.04 ± 0.19‰). These results are contrasted with a narrow range of δ66/64Zn = 0–0.7‰ for a diverse spectrum of upper continental crust materials.The elemental abundance of Zn is negatively correlated with δ66/64Zn, which may reflect that isotopic fractionation occurred by evaporation during the heating event upon tektite formation. Simple Rayleigh distillation predicts isotopic fractionations much larger than what is actually observed, therefore, such a model cannot account for the observed Zn isotope fractionation in tektites. We have developed a more realistic model of evaporation of Zn from a molten sphere: during its hypervelocity trajectory, the molten surface of the tektite will be entrained by viscous coupling with air that will then induce a velocity field inside the molten sphere. This velocity field induces significant radial chemical mixing within the tektite that accelerates the evaporation process. Our model, albeit parameter dependent, shows that both the isotopic composition and the chemical abundances measured in tektites can be produced by evaporation in a diffusion-limited regime.  相似文献   

19.
《Marine pollution bulletin》2014,83(1-2):155-166
Recently compiled databases facilitated estimation of basin-wide benthic organic biomass and turnover in the Strait of Georgia, an inland sea off western Canada. Basin-wide organic biomass was estimated at 43.1 × 106 kg C and production was 54.6 × 106 kg C yr−1, resulting in organic biomass turnover (P/B) of 1.27 × yr−1. Organic biomass and production for sub-regions were predictable from modified organic flux (r2 > 0.9). P/B declined significantly with increasing modified organic flux, suggesting greater biomass storage in high flux sediments. Biomass and production were highest, and P/B lowest near the Fraser River. Annual basin-wide benthic production was 60% of previously estimated oxidized organic flux to substrates, which agrees with proportional measurements from a recent, localized study.Deviations from expected patterns related to organic enrichment and other stressors are discussed, as are potential impacts to benthic biomass and production, of declining bottom oxygen, increasing bottom temperature and potential changes in riverine input.  相似文献   

20.
To investigate the behavior of Li during low-grade metamorphism and fluid flux in an accretionary prism we measured the Li concentrations ([Li]) and isotopic compositions (δ7Li) of sub-greenschist and greenschist-facies Otago Schist composites, as well as cross-cutting quartz veins, which are interpreted to have precipitated from slab-derived fluids. The average [Li] of sub-greenschist facies composites (41 ± 13 μg/g, 2σ) is statistically distinct (97% confidence level, student t test) to that of greenschist facies composites (34 ± 9 μg/g, 2σ), which have experienced mass addition of silica in the form of quartz veins having [Li] between 0.4–2.3 μg/g. A linear regression of the correlation between [Li] and calculated mass additions suggests that the depletion of [Li] in greenschist facies composites is due to both dilution from the addition of the quartz veins, as well as metamorphic dehydration. The [Li] of both groups of composites correlates with their CIA (Chemical Index of Alteration) values (50–58), which are low, consistent with the inferred graywacke protolith of the Otago Schist. The δ7Li of sub-greenschist and greenschist facies composites are remarkably constant, with an average δ7Li of 0.2 ± 1.7 (2σ) and ?0.5 ± 1.9 (2σ), respectively, and comparable to that of the average upper continental crust. Thus, metamorphism has had no discernable effect on δ7Li in these samples. The Li isotopic signature of the schists is similar to that seen in pelitic sedimentary rocks and likely reflects the δ7Li of the protoliths. The surprisingly light δ7Li of the quartz veins (?2.8 to ?1.4) likely records kinetic fractionation associated with Li ingress into the veins from surrounding wallrock.An isotopic equilibrium fluid flow model indicates that: 1) if the [Li] of slab-derived fluids is less than a few μg/g, the δ7Li of the overlying lithologies (i.e., the schists) is not significantly influenced by the fluid flux, regardless of the δ7Li of the fluids, 2) the slab-derived fluids will have heavy δ7Li of > + 10 after reacting with the prism sediments during their ascent, and 3) the [Li] of the slab-derived fluids is likely in the range of 0 < [Li] ≤ 41(μg/g). Thus, isotopically heavy slab-derived fluids that traverse sediments in accretionary prisms may leave little trace in the rocks and their surface compositional characteristics will reflect the net result of their interaction with the sediments of the prism.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号