首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
Two distinct types of alluvial fans occur in the Bow River Valley, Alberta, Canada: fluvially dominated and debris flow dominated. Large, gently sloping fans dominated by fluvial processes are associated with large and less rugged drainage basins, and small rugged basins have produced small, steep fans dominated by debris flow processes. Quantitative analysis demonstrates that strong fan-basin morphometric relationships occur despite a short fan history. Statistical analysis of fan area-basin area relationships indicate that debris flow fan areas do not increase in size as quickly as contributing basins. The relationship of fluvial fan area to basin area is not statistically significant. However, this relationship is probably affected by fan erosion. Examination of fan slope to basin ruggedness relationships indicates that fan slope increases more rapidly than basin ruggedness for both fan types. This is likely related to non-linear discharge and sediment size effects on fluvial fans, and reworking of larger fan surfaces by fluvial processes on debris flow fans.  相似文献   

2.
Climate change and high magnitude mass wasting events pose adverse societal effects and hazards, especially in alpine regions. Quantification of such geomorphic processes and their rates is therefore critical but is often hampered by the lack of appropriate techniques and the various spatiotemporal scales involved in these studies. Here we exploit both in situ cosmogenic beryllium-10 (10Be) and carbon-14 (14C) nuclide concentrations for deducing exposure ages and tracing of sediment through small alpine debris flow catchments in central Switzerland. The sediment cascade and modern processes we track from the source areas, through debris flow torrents to their final export out into sink regions with cosmogenic nuclides over an unprecedented five-year time series with seasonal resolution. Data from a seismic survey and a 90 m core revealed a glacially overdeepened basin, filled with glacial and paraglacial sediments. Surface exposure dating of fan boulders and radiocarbon ages constrain the valley fill from the last deglaciation until the Holocene and show that most of the fan existed in early Holocene times already. Current fan processes are controlled by episodic debris flow activity, snow (firn) and rock avalanches. Field investigations, digital elevation models (DEMs) of difference and geomorphic analysis agree with sediment fingerprinting with cosmogenic nuclides, highlighting that the bulk of material exported today at the outlet of the subcatchments derives from the lower fans. Cosmogenic nuclide concentrations steadily decrease from headwater sources to distal fan channels due to the incorporation of material with lower nuclide concentrations. Further downstream the admixture of sediment from catchments with less frequent debris flow activity can dilute the cosmogenic nuclide signals from debris flow dominated catchments but may also reach thresholds where buffering is limited. Consequently, careful assessment of boundary conditions and driving forces is required when apparent denudation rates derived from cosmogenic nuclide analysis are upscaled to larger regions. © 2018 John Wiley & Sons, Ltd.  相似文献   

3.
On 29 August, 2003, an intense convective storm system affected the Fella River basin, in the eastern Italian Alps, producing rainfall peaks of approximately 390 mm in 12 h. The storm triggered an unusually large debris flow in the ungauged Rio Cucco basin (0·65 km2), with a volume of approximately 78 000 m3. The analysis of the time evolution of the rainstorm over the basin has been based on rainfall estimates from radar observations and data recorded by a raingauge network. Detailed geomorphological field surveys, carried out both before and after the flood of August 2003, and the application of a distributed hydrological model have enabled assessment of flood response, estimation of erosion volumes and sediment supply to the channel network. The accounts of two eyewitnesses have provided useful elements for reconstructing the time evolution and the flow processes involved in the event. Liquid peak discharge estimates cluster around 20 m3 s?1 km?2, placing this event on the flood envelope curve for the eastern Italian Alps. The hydrological analysis has shown that the major controls of the flood response were the exceptional cumulated rainfall amount, required to exceed the large initial losses, and the large rainfall intensities at hourly temporal scales, required to generate high flood response at the considered basin scale. Observations on the deposits accumulated on the alluvial fan indicate that, although the dominant flow process was a debris flow, sheetflood also contributed to fan aggradation and fluvial reworking had an important role in winnowing debris‐flow lobes and redistributing sediment on the fan surface. This points out to the large discharge values during the recession phase of the flood, implying an important role for subsurface flow on runoff generation of this extreme flash flood event. Copyright © 2009 John Wiley & Sons, Ltd.  相似文献   

4.
The assessment of the dominant flow type on alluvial fans usually refers to two categories: debris‐flow fans (i.e. sediment gravity flows) and fluvial fans (i.e. fluid gravity flows). Here we report the results of combined morphometric, stratigraphic and sedimentological approaches which suggest that hyperconcentrated flows, a transitional process rheologically distinct from debris flows and floods and sometimes referred to as debris floods, mud floods, or transitional debris flows, are the dominant fan building process in eastern Canada. These flows produce transitional facies between those of debris flows which consist of a cohesive matrix‐supported diamicton, and those of river flows which display more distinct stratification. The size of the blocks in the channels and the abrasion scars at the base of several trees attest to the high transport capacity of these flows. The fan channels are routed according to various obstacles comprised primarily of woody debris that impede sediment transit. However, these conditions of sediment storage are combined with readily available sediment due to the friable nature of the local lithology. Tree‐ring analysis allowed the reconstruction of eight hydrogeomorphic events which are characterized by a return period of 9.25 years for the period 1934–2008, although most of the analyzed events occurred after 1970. Historical weather data analysis indicates that they were related to rare hydrometeorological events at regional and local scales. This evidence led to the elaboration of weather scenarios likely responsible for triggering flows on the fan. According to these scenarios, two distinct hydrologic regimes emerge: the torrential rainfall regime and the nival regime related to snowmelt processes. Hydrogeomorphic processes occurring in a cold‐temperate climate, and particularly on small forested alluvial fans of north‐eastern North America, should receive more attention from land managers given the hazard they represent, as well as because of their sensitivity to various meteorological parameters. Copyright © 2014 John Wiley & Sons, Ltd.  相似文献   

5.
In aeolian sand sheets the interaction between aeolian and subaqueous processes is considered one of the principal factors that controls this depositional environment. To examine the role played by the subaqueous processes on the construction and accumulation of sand sheets, surface deposits and subsurface sedimentary sections of a currently active aeolian sand sheet, located in the Upper Tulum Valley (Argentina), have been examined. On the sand sheet surface, airflows enable the construction of nabkhas, wind‐rippled mantles (flattened accumulations of sand forming wind ripples), megaripples, and small transverse dunes. Subaqueous deposits consist of sandy current ripples covered by muddy laminae. The latter are generated by annual widespread but low‐energy floods that emanate from the nearby mountains in the aftermath of episodes of heavy precipitations. Deposits of subaqueous origin constitute 5% of the accumulated sand sheet thickness. The construction of the sand sheet is controlled by meteorological seasonal changes: the source area, the San Juan river alluvial fan, receives sediment by thaw‐waters in spring–summer; in fall–winter, when the water table lowers in the alluvial fan, the sediment is available for aeolian transport and construction of the sand sheet area. The flood events play an important role in enabling sand sheet accumulation: the muddy laminae serve to protect the underlying deposits from aeolian winnowing. Incipient cement of gypsum on the sand and vegetation cover acts as an additional stabilizing agent that promotes accumulation. Episodic and alternating events of erosion and sedimentation are considered the main reason for the absence of soils and palaeosols. Results from this study have enabled the development of a generic model with which to account for: (i) the influence of contemporaneous subaqueous processes on the construction and accumulation in recent and ancient sand sheets; and (ii) the absence of developed soils in this unstable topographic surface. Copyright © 2013 John Wiley & Sons, Ltd.  相似文献   

6.
Mountain ranges are frequently subjected to mass wasting events triggered by storms or earthquakes and supply large volumes of sediment into river networks. Besides altering river dynamics, large sediment deliveries to alluvial fans are known to cause hydro‐sedimentary hazards such as flooding and river avulsion. Here we explore how the sediment supply history affects hydro‐sedimentary river and fan hazards, and how well can it be predicted given the uncertainties on boundary conditions. We use the 2D morphodynamic model Eros with a new 2D hydrodynamic model driven by a sequence of flood, a sediment entrainment/transport/deposition model and a bank erosion law. We first evaluate the model against a natural case: the 1999 Mount Adams rock avalanche and subsequent avulsion on the Poerua river fan (West Coast, New Zealand). By adjusting for the unknown sediment supply history, Eros predicts the evolution of the alluvial riverbed during the first post‐landslide stages within 30 cm. The model is subsequently used to infer how the sediment supply volume and rate control the fan aggradation patterns and associated hazards. Our results show that the total injected volume controls the overall levels of aggradation, but supply rates have a major control on the location of preferential deposition, avulsion and increased flooding risk. Fan re‐incision following exhaustion of the landslide‐derived sediment supply leads to sediment transfer and deposition downstream and poses similar, but delayed, hydro‐sedimentary hazards. Our results demonstrate that 2D morphodynamics models are able to capture the full range of hazards occurring in alluvial fans including river avulsion aggradation and floods. However, only ensemble simulations accounting for uncertainties in boundary conditions (e.g., discharge history, initial topography, grain size) as well as model realization (e.g., non‐linearities in hydro‐sedimentary processes) can be used to produce probabilistic hazards maps relevant for decision making. Copyright © 2017 John Wiley & Sons, Ltd.  相似文献   

7.
Arid alluvial fan and fluvial dry wash surfaces in Stonewall Flat, Nevada, USA, are characterized using surface geomorphic surveys, soil pits, botanical line surveys, and varnish microlamination dating techniques. Active and abandoned washes, and active fan surfaces are dominated by primary geomorphic processes of high‐energy sedimentation from flash floods. These surfaces are characterized by bar and swale topography, a lack of stone pavements, soil horizons, and rock varnish. Younger terraces and slightly older intermediate fan surfaces are in transition from primary sedimentation processes to lower energy secondary surface‐modifying processes of sheet wash and eolian transport and deposition. These surfaces are characterized by faint to no bar and swale topography, incipient to moderately well‐developed pavements and soil horizons, and abundant coppices. Old and stable fan surfaces are dominated by lower energy secondary processes and manifest well‐developed pavements, soils, and sparse coppices around widely distributed shrubs. Varnish microlamination dating yields ages of 13·15 ka for intermediate fan surfaces and 25·55 to 86·75 ka for stable fan surfaces. Plant communities co‐developing with these surfaces affect and are affected by both primary and secondary geomorphic fan processes. Relatively active surfaces contain few woody species. Co‐dominance of shrubs and annuals with abundant annuals between the shrubs is characteristic of surfaces transitional from primary processes to secondary processes. Stable surfaces dominated by secondary processes are characterized by woody perennials, with long‐lived woody species inhabiting the oldest surfaces. Feedback mechanisms between early botanical communities and eolian deposition affect coppice and pavement development. In turn, these surface features control both the composition and distribution of botanical communities on older, more stable surfaces. Published 2012. This article is a U.S. Government work and is in the public domain in the USA.  相似文献   

8.
The grass-covered slopes on the southern flank of Mt Thomas, an upfaulted block of highly sheared sandstone and argillite 40 km NW of Christchurch, New Zealand, are presently undergoing severe erosion by a combination of mass-wasting processes. Gully erosion, soil slips, and debris flows have carved out a number of steep, deeply incised ravines, from which coarse debris is transported (primarily by debris flows) to alluvial fans below. Geologic and historical evidence indicates that debris flows have been episodically active here for at least the last 20,000 years and have been the dominant process in fan building. This demonstrates that catastrophic geomorphic processes, rather than processes acting at relatively uniform rates, can be dominant in humid-temperate areas as well as in arid and semi-arid regions. In April 1978, debris flows were triggered in one of two unstable ravines in the Bullock Creek catchment by a moderate intensity, long duration rainstorm with a return period in excess of 20 years. Surges of fluid debris, moving at velocities up to 5 m/s, transported a dense slurry of gravel, sand, and mud up to 3·5 km over a vertical fall of 600 m. Deposition on the alluvial fan occurred when the flows left the confines of an entrenched fan-head channel and spread out as a 0·16 km2 sheet averaging 1·2 m thick. In all, 195,000 m3 were deposited, roughly a third of that being reworked sediments from the head of the fan. Sediment yield from this one event would be equivalent to several thousand years worth of erosion at average sediment discharge rates for small South Island mountain catchments. Samples of viscous fluid debris during surges contained up to 84 per cent solids, composed of 70 per cent gravel, 20 per cent silt, and 4 per cent clay. Fluid density of the material ranged between 1·95 and 2·13 g/cm3, and it was extremely poorly sorted. Between surges the fluid was less viscous, less dense, and unable to carry gravel in suspension. Severe fan-head entrenchment of the stream channel (approximately 10 m in less than 24 hours) was accomplished by the erosive action of the surges. Tectonic uplift of the Mt Thomas block and the weak, crushed condition of the bedrock appear to be ultimately responsible for the catastropic erosion of slopes in the Bullock Creek catchment. However, forest clearing within the last few centuries appears to have greatly increased the rate of mass wasting and gully erosion on these slopes.  相似文献   

9.
A record spanning almost 20 years of suspended sediment and discharge measurements on two reaches of an agricultural watershed is used to assess the influence of in‐channel sediment supplies and bed composition on suspended sediment concentrations (SSC). We analyse discharge‐SSC relationships from two small streams of similar hydrology, climate and land use but widely different bed compositions (one dominated by sand, the other by gravel). Given that sand‐dominated systems have more fine sediment available for transport, we use bed composition and the relative proportion of surface sand and gravel to be representative of in‐channel sediment supply. Both high flow events and lower flows associated with onset and late recessional storm flow (‘low flows’) are analysed in order to distinguish external from in‐channel sources of sediment and to assess the relationship between low flows and sediment supply. We find that SSC during low flows is affected by changes to sediment supply, not just discharge capacity, indicated by the variation in the discharge‐SSC relationship both within and between low flows. Results also demonstrate that suspended sediment and discharge dynamics differ between reaches; high bed sand fractions provide a steady supply of sediment that is quickly replenished, resulting in more frequent sediment‐mobilizing low flow and relatively constant SSC between floods. In contrast, SSC of a gravel‐dominated reach vary widely between events, with high SSC generally associated with only one or two high‐flow events. Results lend support to the idea that fine sediment is both more available and more easily transported from sand‐dominated streambeds, especially during low flows, providing evidence that bed composition and in‐channel sediment supplies may play important roles in the mobilization and transport of fine sediment. In addition, the analysis of low‐flow conditions, an approach unique to this study, provides insight into alternative and potentially significant factors that control fine sediment dynamics. Copyright © 2007 John Wiley & Sons, Ltd.  相似文献   

10.
The flooding susceptibility of alluvial fans in the Southern Apennines has long been neglected. To partly address this oversight, we focus on the region of Campania which contains highly urbanized piedmont areas particularly vulnerable to flooding. Our findings are based on stratigraphic analysis of the fans and morphometric analysis of the basin‐fan systems. Using geomorphological analysis we recognized active alluvial fans while stratigraphic analysis together with statistical analysis of the morphometric variables was used to classify the fans in terms of the transport process involved. The results indicate that in the geological context examined, the best discrimination between debris flow (Df) and water flood (Wf) processes is achieved by means of two related variables, one for the basin (feeder channel inclination, Cg) and one for the fan (fan length, Fl). The probability that an unclassified fan belongs to group Wf is computed by applying a logistic function in which a P value exceeding 0.5 indicates that a basin/fan system belongs to group Wf. This important result led to the classification of the entire basin/fan system data. As regards process intensity, debris flow‐dominated fans are susceptible to the occurrence of flows with high viscosity and hence subject to more severe events than water flood‐dominated fans. Bearing this in mind, the data gathered in this study allow us to detect where alluvial fan flooding might occur and give information on the different degrees of susceptibility at a regional scale. Regrettably, urban development in recent decades has failed to take the presence of such alluvial fans into account due to the long recurrence time (50–100 years) between floods. This paper outlines the distribution of such susceptibility scenarios throughout the region, thereby constituting an initial step to implementing alluvial fan flooding control and mitigation. Copyright © 2012 John Wiley & Sons, Ltd.  相似文献   

11.
Factors influencing sediment transport and storage within the 156·6 km2 drainage basin of Pancho Rico Creek (PRC), and sediment transport from the PRC drainage basin to its c. 11 000 km2 mainstem drainage (Salinas River) are investigated. Numeric age estimates are determined by optically stimulated luminescence (OSL) dating on quartz grains from three sediment samples collected from a ‘quaternary terrace a (Qta)’ PRC terrace/PRC‐tributary fan sequence, which consists dominantly of debris flow deposits overlying fluvial sediments. OSL dating results, morphometric analyses of topography, and field results indicate that the stormy climate of the Pleistocene‐Holocene transition caused intense debris‐flow erosion of PRC‐tributary valleys. However, during that time, the PRC channel was backfilled by Qta sediment, which indicates that there was insufficient discharge in PRC to transport the sediment load produced by tributary‐valley denudation. Locally, Salinas Valley alluvial stratigraphy lacks any record of hillslope erosion occurring during the Pleistocene‐Holocene transition, in that the alluvial fan formed where PRC enters the Salinas Valley lacks lobes correlative to Qta. This indicates that sediment stripped from PRC tributaries was mostly trapped in Pancho Rico Valley despite the relatively moist climate of the Pleistocene‐Holocene transition. Incision into Qta did not occur until PRC enlarged its drainage basin by c. 50% through capture of the upper part of San Lorenzo Creek, which occurred some time after the Pleistocene‐Holocene transition. During the relatively dry Holocene, PRC incision through Qta and into bedrock, as well as delivery of sediment to the San Ardo Fan, were facilitated by the discharge increase associated with stream‐capture. The influence of multiple mechanisms on sediment storage and transport in the Pancho Rico Valley‐Salinas Valley system exemplifies the complexity that (in some instances) must be recognized in order to correctly interpret terrestrial sedimentary sequences in tectonically active areas. Copyright © 2009 John Wiley & Sons, Ltd.  相似文献   

12.
Holocene glaciers have contributed to an abundance of unstable sediments in mountainous environments. In permafrost environments, these sediments can contain ground ice and are subject to rapid geomorphic activity and evolution under condition of a warming climate. To understand the influence of ground ice distribution on this activity since the Little Ice Age (LIA), we have investigated the Pierre Ronde and Rognes proglacial areas, two cirque glacier systems located in the periglacial belt of the Mont Blanc massif. For the first time, electrical resistivity tomography, temperature data loggers and differential global positioning systems (dGPS) are combined with historical documents and glaciological data analysis to produce a complete study of evolution in time and space of these small landsystems since the LIA. This approach allows to explain spatial heterogeneity of current internal structure and dynamics. The studied sites are a complex assemblage of debris‐covered glacier, ice‐rich frozen debris and unfrozen debris. Ground ice distribution is related to former glacier thermal regime, isolating effect of debris cover, water supply to specific zones, and topography. In relation with this internal structure, present dynamics are dominated by rapid ice melt in the debris‐covered upper slopes, slow creep processes in marginal glacigenic rock glaciers, and weak, superficial reworking in deglaciated moraines. Since the LIA, geomorphic activity is mainly spatially restricted within the proglacial areas. Sediment exportation has occurred in a limited part of the former Rognes Glacier and through water pocket outburst flood and debris flows in Pierre Ronde. Both sites contributed little sediment supply to the downslope geomorphic system, rather by episodic events than by constant supply. In that way, during Holocene and even in a paraglacial context as the recent deglaciation, proglacial areas of cirque glaciers act mostly as sediment sinks, when active geomorphic processes are unable to evacuate sediment downslope, especially because of the slope angle weakness. Copyright © 2014 John Wiley & Sons, Ltd.  相似文献   

13.
Alluvial fans and debris cones link two zones of the fluvial system (e.g. hillslope gully systems to stream channels; mountain catchment sediment source areas to main river systems or to sedimentary basins) and therefore have important coupling or buffering roles. These roles may be both functional and preservational. The functional role includes debris‐cone coupling, which controls sediment supply from hillslope gully systems to stream channels, influencing channel morphology. Coupling through larger alluvial fans, expressed by fanhead trenching, causes a distal shift in sedimentation zones, or when expressed by through‐fan trenching, causes complete sediment by‐pass. The preservational role stems from the fact that fans and cones are temporary sediment storage zones, and may preserve a record of source–area environmental change more sensitively than would sediments preserved further downsystem. Fan coupling mechanisms include distally‐induced coupling (basal scour, ‘toe cutting’, marginal incision) and proximally‐induced coupling (fanhead and midfan trenching). These mechanisms lead initially to partial coupling, either extending the immediate sediment source area to the stream system or shifting the focus of sedimentation distally. Complete coupling involves transmission of sediment from the feeder catchment through the fan environment into the downstream drainage or a sedimentary basin. The implications of coupling relate to downstream channel response, fan morphology, sedimentation patterns and vertical sedimentary sequences. Temporal and spatial scales of coupling are related, and with increasing scales the dominant controls shift from storm events to land cover to climatic and base‐level change and ultimately to the relationships between tectonics and accommodation space. Finally, future research challenges are identified. Modern dating techniques and sophisticated analysis of remotely sensed data can greatly improve our understanding of fan dynamics, and should lead to better cross‐scale integration between short‐term process‐based approaches and long‐term sedimentological applications, while maintaining high quality field‐based observations. Copyright © 2011 John Wiley & Sons, Ltd.  相似文献   

14.
The question of whether millennial‐scale geological slip rates are consistent with decade‐scale geodetic slip rates is of great importance in evaluating the nature of continental deformation within the Tibetan Plateau. We determined the time‐averaged slip rate of the Sulu He segment of the Altyn Tagh Fault, near Changma in Gansu Province, China, based on geomorphic analysis, remote sensing data, and cosmogenic 10Be surface‐exposure age dating. Quaternary alluvial fan deposits in the study area (Qf1, Qf2, Qf3) are displaced by left‐lateral movement along the Altyn Tagh Fault. Because of the large accumulated displacement of these fans, some of them have become disconnected from the fan apexes that are directly linked to the debris‐source areas in the piedmont of the Qilian Shan to the south. The total minimum offsets are estimated to be about 429 ± 41 m for Qf1, about 130 ± 10 m for Qf2, and 32 ± 1 m for Qf3. The 10Be surface‐exposure ages obtained for Qf1 and Qf2 are 100–112 ka and 31–43 ka, respectively. Accordingly, the slip rate since the period of Qf1 and Qf2 depositions is calculated to have been about 3.7 mm/yr.  相似文献   

15.
The slope of an alluvial fan increases with increasing debris size and sediment concentration in the flow, and decreases with increasing discharge. Laboratory studies suggest that the discharge which controls this slope, or dominant discharge, is that which is equalled or exceeded one quarter to one third of the time that flow occurs on the fan. In contrast, the dominant discharge in perennial alluvial rivers is equalled or exceeded only about 5 per cent of the time that flow occurs in the river. The dominant discharge on fans increases with increasing debris size, reflecting the importance of threshold stress. The slope of some natural and most laboratory alluvial fans is steepest on the flanks and gentlest along the axis. Consideration of the momentum of water debouching onto a fan at its apex suggests that the difference in slope between axis and flank should be greatest on steep fans composed of relatively non-cohesive materials because on such fans higher discharges tend to flow down the axis, whereas lower discharges can be turned to course down the flanks. On fans with gentle slopes or composed of more cohesive material the higher discharges can also be turned toward the flanks, so on such fans the difference in slope between the axis and flank is less pronounced. Field and laboratory observations support this interpretation. Because deposition at any one time on an alluvial fan is localized, some areas aggrade while others remain at a fixed elevation. This process is treated as a Markov process with the probability of diversion from an area of active deposition into an adjacent lower area increasing as the height of the active area above the mean or ‘ideal’ surface increases. Analysis of data from laboratory and natural fans suggests that the amplitude of such surface irregularities is greater on fans composed of coarser material. The data on natural fans also suggest an increase in amplitude of the irregularities with increasing fan area.  相似文献   

16.
The relative importance of tectonics, climate, base level and source lithology as primary factors on alluvial‐fan evolution, fan morphology and sedimentary style remain in question. This study examines the role of catchment lithology on development and evolution of alluvial megafans (>30 km in length), along the flanks of the Kohrud Mountain range, NE Esfahan, central Iran. These fans toe out at axial basin river and playa‐fringe sediments towards the centre of basin and tectonics, climatic change and base‐level fluctuations, were consistent for their development. They formed in a tectonically active basin, under arid to semiarid climate and a long term (Plio‐Pleistocene to Recent) change from wetter to drier conditions. The key differences between two of these fans, Soh and Zefreh fans, along the west and south flanks of this mountain range, is that their catchments are underlain by dissimilar bedrock types. The source‐area lithologies of the Soh and Zefreh fans are in sedimentary and igneous terrains, respectively, and these fans developed their geometry mainly in response to different weathering intensities of their catchment bedrock lithologies. Fan surface mapping (based on 1/50000 topographic maps, satellite images, and fieldwork), reveals that the geomorphic evolution of these fans differs in that the relatively large‐scale incision and through trenching of the Soh fan is absent in the Zefreh fan. Whereas the limited sediment supply of the Soh fan has resulted in a deep incised channel, the Zefreh fan has remained aggradational with little or no trenching into proximal to medial fan surface due to its catchment bedrock geology, composed mainly by physically weathered volcaniclastic lithology and characterized by high sediment supply for delivery during episodic flash floods. Sediment supply, which is mainly a function of climate and source lithology, is a dominant driver behind the development of fan sequences in alluvial megafans. Copyright © 2012 John Wiley & Sons, Ltd.  相似文献   

17.
Although the importance of ENSO on hydrological anomalies has been recognized, variations in sediment fluxes caused by these extreme events are poorly documented. The effect of ENSO is not limited to changes in sediment mobilization. Since ENSO events can affect terrestrial ecosystems, they may have important effects on sediment production and transport in river basins over time spans that are longer than the duration of the event itself. The Catamayo‐Chira basin is an interesting casestudy for investigating these geomorphic implications. The objectives were: (i) to study the effect of ENSO on stream flow and sediment yields in the basin, (ii) to investigate if ENSO events affect sediment yields in the post‐ENSO period and (iii) to understand which factors control the ENSO and post‐ENSO basin response. During strong negative ENSO periods, mean annual stream flow discharge at the inlet of the Poechos reservoir in the lower basin was 5.4 times higher than normal annual discharges, while average sediment fluxes exceeded those of normal years by a factor of about 11. In two heavily affected periods, 45.9% of the total sediment yield in the 29 years observation period was generated. Sediment fluxes in the post‐ENSO period are lower than expected, which proves post‐ENSO event dynamics are significantly different from pre‐event dynamics. Our analysis indicates the increase of vegetation growth in the lower basin is not the main reason explaining considerable sediment flux decrease in post‐ENSO periods. During strong ENSO events, sediment in alluvial stores in the lower part of the basin is removed due to enlarging and deepening of channels. In post‐ENSO periods, normal discharges and persisting sediment supplies from the middle/upper basin lead to river aggradation and storage of large amounts of sediment in alluvial plains. The decrease in sediment export will last for several years until the equilibrium is re‐established. Copyright © 2011 John Wiley & Sons, Ltd.  相似文献   

18.
We present laboratory and field evidence that in mountainous catchment‐fan systems persistent alluvial fanhead aggradation and trenching may result from infrequent, large sediment inputs. We suggest that the river‐fan systems along the fault‐bounded range front of the western Southern Alps, New Zealand, are likely to be in a dynamic equilibrium on ≥103‐yr timescales, superimposed on which their fanheads undergo long‐term cumulative episodic aggradation. These fanheads are active only in rare events, do not take part in the usual behaviour of the catchment‐fan system and require much longer to exhibit dynamic equilibrium than the rest of the fan. These findings (1) increase our knowledge of the effects of extreme events on alluvial fan morphodynamics in humid climates, (2) question the general applicability of inferring past climatic or tectonic regimes from alluvial‐fan morphology and stratigraphy and (3) provide a conceptual basis for hazard zonation on alluvial fans. Copyright © 2006 John Wiley & Sons, Ltd.  相似文献   

19.
Coastal areas are vulnerable to the impacts of tropical cyclones (TC), tsunamis and other water super‐elevation events, but the frequency of these events is often poorly represented by conventional records. Coastal overwash deposits (including washover fans) can provide a longer‐term archive of event frequency. Because of their low‐gradient geomorphic form, washover fans require high accuracy (centimetre‐resolution) topographic models to understand patterns of connectivity and dynamics that control archive formation. Using images collected by a remotely piloted aircraft system (RPAS, or ‘drone’) and Structure‐from‐Motion (SfM) photogrammetry techniques, we apply a novel point‐cloud filtering technique based on KMeans classification of the R‐G‐B colour of each X‐Y‐Z point to remove vegetation and create a centimetre‐resolution and accuracy bare‐earth digital terrain model (DTM) of a washover fan in Exmouth Gulf (Western Australia). Using the RPAS‐SfM orphophoto and DEM data, supported by ground‐penetrating radar (GPR) and field stratigraphic analysis, we show how this approach can be applied to understand dynamics controlling low‐gradient geomorphic landforms, using an example of a washover fan sedimentary archive in northwestern Australia created by extreme overwash events. Our approach reveals the likely role of backflooding and terrestrial runoff in creating backwater environment for sub‐aqueous deposition and good sediment preservation and identifies key areas to target for detailed dating and stratigraphic analysis of a potentially decadal to sub‐millennial resolution sediment archive of TC activity. Copyright © 2018 John Wiley & Sons, Ltd.  相似文献   

20.
A cellular model of Holocene upland river basin and alluvial fan evolution   总被引：1，自引：0，他引：1  
The CAESAR (Cellular Automaton Evolutionary Slope And River) model is used to simulate the Holocene development of a small upland catchment (4·2 km2) and the alluvial fan at its base. The model operates at a 3 m grid scale and simulates every flood over the last 9200 years, using a rainfall record reconstructed from peat bog wetness indices and land cover history derived from palynological sources. Model results show that the simulated catchment sediment discharge above the alluvial fan closely follows the climate signal, but with an increase in the amplitude of response after deforestation. The important effects of sediment storage and remobilization are shown, and findings suggest that soil creep rates may be an important control on long term (>1000 years) temperate catchment sediment yield. The simulated alluvial fan shows a complex and episodic behaviour, with frequent avulsions across the fan surface. However, there appears to be no clear link between fan response and climate or land use changes suggesting that Holocene alluvial fan dynamics may be the result of phases of sediment storage and remobilization, or instabilities and thresholds within the fan itself. Copyright © 2002 John Wiley & Sons, Ltd.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号