首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 15 毫秒
1.
Quantitative estimation of the material transported by the wind under field conditions is essential for the study and control of wind erosion. A critical step of this calculation is the integration of the curve that relates the variation of the amount of the material carried by the wind with height. Several mathematical procedures have been proposed for this calculation, but results are scarce and controversial. One objective of this study was to assess the efficiency of three mathematical models (a rational, an exponential, and a simplified Gaussian function) for the calculation of the mass transport, as compared to the linear spline interpolation. Another objective of this study was to compare the mass transport calculated from field measurements obtained from a minimum of three discrete sampling heights with measurements of nine sampling heights. With this purpose, wind erosion was measured under low surface roughness conditions on an Entic Haplustoll during 25 events. The rational function was found to be mathematically limited for the estimation of wind eroded sediment mass flux. The simplified Gaussian model did not fit to the vertical mass flux profile data. Linear spline interpolation generally produced higher mass transport estimates than the exponential equation, and it proved to be a very flexible and robust method. Using different sampling arrangements and different mass flux models can produce differences of more than 45% in mass transport estimates, even under similar field conditions. Under the conditions of this study, at least three points between the soil surface and 1·5 m high, including one point as closest as possible to the surface, should be sampled in order to obtain accurate mass transport estimates. Additionally, the linear spline interpolation and the non‐linear regression using an exponential model, proved to be mathematically reliable methods for calculating the mass transport. Copyright © 2010 John Wiley & Sons, Ltd.  相似文献   

2.
Wind erosion is an important soil erosion and hence a soil degradation problem in the Sahelian zone of West Africa. Potentially, the characteristic dryland vegetation with scattered trees and shrubs can provide for soil erosion protection from wind erosion, but so far adequate quantification of vegetation impacts is lacking. The aim of this study was to develop a model of wind‐blown soil erosion and sediment transport around a single shrub‐type vegetation element. Starting with the selection of a suitable transport equation from four possible sediment transport equations, the effects of a single vegetation element on wind speed were parameterized. The modified wind speed was then applied to a sediment transport equation to model the change in sediment mass flux around a shrub. The model was tested with field data on wind speed and sediment transport measured around isolated shrubs in a farmer's field in the north of Burkina Faso. The simple empirical equation of Radok (Journal of Glaciology 19 : 123–129, 1977) performed best in modelling soil erosion and sediment transport, both for the entire event duration and for each minute within an event. Universal values for the empirical constants in the sediment transport equation could not be obtained because of the large variability in soil and roughness characteristics. The pattern of wind speed, soil erosion and sediment transport behind a shrub and on either side of it was modelled. The wind speed changed in the lee of the vegetation element depending on its porosity, height and downwind position. Wind speed was recovered to the upstream speed at a downwind distance of 7·5 times the height of the shrub. The variability in wind direction created a ‘rotating’ area of influence around the shrub. Compared to field measurements the model predicted an 8% larger reduction in sediment transport in the lee of the vegetation element, and a 22% larger increase beside the vegetation element. Copyright © 2011 John Wiley & Sons, Ltd.  相似文献   

3.
The effect of a step change in macro‐roughness on the saltation process under sediment supply limited conditions was examined in the atmospheric boundary layer. For an array of roughness elements of roughness density λ = 0.045 (λ = total element frontal area/total surface area of the array) the horizontal saltation flux was reduced by 90% (±7%) at a distance of ≈150 roughness element heights into the array. This matches the value predicted using an empirical design model and provides confidence that it can be effectively used to engineer roughness arrays to meet sand flux reduction targets. Measurements of the saltation flux characteristics in the vertical dimension, including: saltation layer decay (e‐folding) height and particle size, revealed that with increasing distance into the array, the rate of mass flux change with increasing height decreased notably, and (geometric) mean particle diameter decreased. The distribution of the saltation mass flux in the vertical remains exponential in form with increasing distance into the roughness array, and the e‐folding height increases as well as increasing at a greater rate as particle diameter diminishes. The increase in e‐folding height suggests the height of saltating particles is increasing along with their mean speed. This apparent increase in mean speed is likely due to the preferential removal, or sequestration, of the slower moving particles across the size spectrum, as they travel through the roughness array. Copyright © 2018 John Wiley & Sons, Ltd.  相似文献   

4.
Grain-size characteristics and the flux of sediment transported by wind from a cultivated paddock in a Quaternary relict dune field are described. Sediments were collected at seven heights between 0.7 and 2.0 m. The distribution of sediment mass with height is explained by a power function (of the order of −1), which is highly skewed towards the bed. The distribution of <90 μm sediment mass is explained by a log function of height and is less skewed towards the bed because these finer particles are influenced by the vertical velocity component of the wind. The particle-size distribution (PSD) of the eroded sediments is strongly influenced by the PSD of the parent material. Enrichment of the suspended sediment (PSA<90 μm) was in the order of 2.3 times. Sediment flux measurements show that 93 per cent of the erosion occurred in 3 per cent of the time.  相似文献   

5.
There has been little work to date into the controls on slope‐to‐channel fine sediment connectivity in alpine environments largely ice‐free for most of the Holocene. Characterization of these controls can be expected to result in better understanding of how landscapes “relax” from such perturbations as climate shock. We monitored fine sediment mobilization on a slope segment hydrologically connected to a stream in the largely ice‐free 8·3 km2 Hoophorn Valley, New Zealand. Gerlach traps were installed in ephemeral slope channels to trap surficial material mobilized during rainfall events. Channel sediment flux was measured using turbidimeters above and below the connected slope, and hysteresis patterns in discharge‐suspended sediment concentrations were used to determine sediment sources. Over the 96 day measurement period, sediment mobilization from the slope segment was limited to rainfall events, with increasingly larger particles trapped as event magnitude increased. Less than 1% of the mass of particles collected during these events was fine sediment. During this period, 714 t of suspended sediment was transported through the lower gauging station, 60% of it during rainfall events. Channel sediment transfer patterns during these events were dominated by clockwise hysteresis, interpreted as remobilization of nearby in‐channel sources, further suggesting limited input of fine sediment from slopes in the lower valley. Strong counterclockwise hysteresis, representing input of fine sediment from slope segments, was restricted to the largest storm event (JD2 2009) when surfaces in the upper basin were activated. The results indicate that the slopes of the lower Hoophorn catchment are no longer functioning as sources of fine sediment, but rather as sources of coarse material, with flux rates controlled by the intensity and duration of rainfall events. Although speculative, these findings suggest a shift to a coarse sediment dominated slope‐to‐channel transfer system as the influence of pre‐Holocene glacial erosion declines. Copyright © 2011 John Wiley & Sons, Ltd.  相似文献   

6.
As previously observed in marine sediments collected downwind of African or South American continental sources, recent studies of sediment cores collected at the bottom of Mejillones Bay in north Chile (23°S) show a laminated structure in which the amount of particles of aeolian origin and their size create significant differences between the layers. This suggests inter‐annual to inter‐decadal variations in the strength of the local southerly winds responsible for (1) the erosion of the adjacent hyperarid surface of the Mejillones Pampa, and (2) the subsequent transport of the eroded particles towards the bay. A simple model accounting for the vertical uptake, transport, and deposition of the particles initially set into motion by wind at the surface of the pampa is proposed. This model, which could be adapted to other locations, assumes that the initial rate of (vertical) uptake is proportional to the (horizontal) saltation flux quantified by means of White's equation, that particles are lifted to a height (H), increasing with the magnitude of turbulence, and that sedimentation progressively removes the coarsest particles from the air column as it moves towards the bay. In this model, the proportionality constant (A) linking the vertical flux of particles with the horizontal flux, and the injection height (H) control the magnitude and size distribution of the deposition flux in the bay. Their values are determined using the wind speed measured over the pampa and the size distribution of particles collected in sediment traps deployed in the bay as constraints. After calibration, the model is used to assess the sensitivity of the deposition flux to the wind intensity variations. The possibility of performing such quantitative studies is necessary for interpreting precisely the variability of the aeolian material in the sediment cores collected at the bottom of Mejillones Bay. Copyright © 2010 John Wiley & Sons, Ltd.  相似文献   

7.
The composition, grain‐size, and flux of stream sediment evolve downstream in response to variations in basin‐scale sediment delivery, channel network structure, and diminution during transport. Here, we document downstream changes in lithology and grain size within two adjacent ~300 km2 catchments in the northern Rocky Mountains, USA, which drain differing mixtures of soft and resistant rock types, and where measured sediment yields differ two‐fold. We use a simple erosion–abrasion mass balance model to predict the downstream evolution of sediment flux and composition using a Monte Carlo approach constrained by measured sediment flux. Results show that the downstream evolution of the bed sediment composition is predictably related to changes in underlying geology, influencing the proportion of sediment carried as bedload or suspended load. In the Big Wood basin, particle abrasion reduces the proportion of fine‐grained sedimentary and volcanic rocks, depressing bedload in favor of suspended load. Reduced bedload transport leads to stronger bed armoring, and coarse granitic rocks are concentrated in the stream bed. By contrast, in the North Fork Big Lost basin, bedload yields are three times higher, the stream bed is less armored, and bed sediment becomes dominated by durable quartzitic sandstones. For both basins, the geology‐based mass balance model can reproduce within ~5% root‐mean‐square error the composition of the bed substrate using realistic erosion and abrasion parameters. As bed sediment evolves downstream, bedload fluxes increase and decrease as a function of the abrasion parameter and the frequency and size of tributary junctions, while suspended load increases steadily. Variable erosion and abrasion rates produce conditions of variable bed‐material transport rates that are sensitive to the distribution of lithologies and channel network structure, and, provided sufficient diversity in bedrock geology, measurements of bed sediment composition allow for an assessment of sediment source areas and yield using a simple modeling approach. Copyright © 2016 John Wiley & Sons, Ltd.  相似文献   

8.
  相似文献   

9.
Wind erosion measurements were carried out in Nellis Dunes Recreation Area, southern Nevada, USA. Gross erosion (the total mass of sediment effectively blown away from a surface), gross deposition (the total mass of sediment effectively depositing on a surface) and net erosion (the difference in sediment mass before and after an event) were measured for 1 year, on 17 different types of surfaces developed on loose dune sand, compacted sand, loose silt, compacted and/or aggregated silt, rock‐covered sands and silts, mixtures of sand, silt and clay, exposed petrocalcic horizons, gravelly substrata and bedrock. Results showed that net erosion, which is the type of erosion measured in field and laboratory experiments, strongly differs from gross erosion. Activity on a surface is much higher than classic net erosion measurements suggest. Future studies on wind erosion should better acknowledge the distinction between the two types of process. Also, a grain diameter of maximum susceptibility to wind erosion (‘optimum deflation diameter’) near 70 µm as proposed by the aeolian literature only exists for net wind erosion. No such optimum diameter was found for gross wind erosion within the particle range 0–100 µm delineating the transport modes of suspension and modified saltation. In addition, desert surfaces predominantly composed of sand did not show an optimum deflation diameter (for net erosion) around 70 µm. Instead, there was a preferential grain size around 15 µm at which particles were most vulnerable to net emission. Desert surfaces poor in sand showed the classic value of 70 µm. This suggests that interactions exist between the type of surface and the susceptibility of particles to wind erosion. This study is solely based on field data. Although results are supported by two previous wind tunnel studies, more wind tunnel experiments documenting the interactions between gross erosion and gross deposition are necessary. Copyright © 2010 John Wiley & Sons, Ltd.  相似文献   

10.
This paper deals with the effect of rainfall on the process of wind erosion of beach sands and presents results from both field and wind tunnel experiments. Although sediment transport by splash is of secondary importance on coastal dunes, splash–saltation processes can move sediments in conditions where no motion is predicted by aeolian processes. The effect of raindrop impact on the movement of soil particles by wind was measured on a sand beach plain using an acoustic sediment sampler. In general, an increase of particle movement by wind at the sensor heights was observed during rainfall. Rainfall also affected the wind erosion process during and after rain by changing the cohesive conditions of the surface. The influence of the surface moisture content on the initiation of wind erosion and on the vertical distribution of transported sand particles was studied in a wind tunnel. Moisture significantly increased threshold wind velocities for the initiation of sediment transport and modified vertical sediment profiles.  相似文献   

11.
This study investigates the consequences of flocculation for sediment flux in glacier‐fed Lillooet Lake, British Columbia based on density, fractal dimension, in situ profiles of sediment concentration and size distribution, and settling velocity equations presented in the literature. Sediment flux attributed to macroflocs during the late spring and summer accounts for a significant portion of sediment flux in the lake, equivalent to at least one‐quarter of the average annual sediment flux. Fine sediment is reaching the lake floor faster in flocs than occurs if settling as individual grains. This flux varies both spatially and temporally over the observation period, suggesting a link between deposition via flocculation and the properties of bottom sediments. Macrofloc flux increased through June, reached a peak during July, and then declined into August. Macrofloc flux was greatest in the distal end of the first basin, approximately 10 km from the point of inflow. Relatively high excess densities (～0·1 g cm–3 at 500 µm) for flocs in situ are consistent with a composition dominated by inorganic primary particles. Microlaminations within Lillooet Lake varves have been linked by earlier workers to discharge events, and the action of turbidity currents, emanating from the Lillooet River. While turbidity currents undoubtedly occur in Lillooet Lake, these results demonstrate flocculation as an adjunct process linking discharge, lake level, macrofloc flux, bulk density and microlaminations. In situ measurements of sediment settling velocity in glacier‐fed lakes are required to better constrain flux rates, and permit comparison between flocculation in lacustrine environments with existing studies of estuarine, marine and fluvial flocculation. Copyright © 2009 John Wiley & Sons, Ltd.  相似文献   

12.
The horizontal and vertical sand mass fluxes in aeolian sand transport are investigated in a wind tunnel by PTV (particle tracking velocimetry). According to the particle velocity and volume fraction of each individual particle from PTV images, the total horizontal sand mass flux, the horizontal mass fluxes of ascending and descending sand particles, and upward and downward vertical sand fluxes are analyzed. The results show that the horizontal mass fluxes of ascending and descending sand particles generally decrease with the increase of height and can be described by an exponential function above about 0.03 m height. At the same friction velocity, the decay heights of the total horizontal sand mass flux and the horizontal mass fluxes of ascending and descending sand particles are very similar. The proportion of horizontal mass flux of ascending sand particles is generally about 0.3–0.42, this means the horizontal mass flux of descending sand particles makes an important contribution to the total horizontal sand mass flux. Both the upward and downward vertical sand mass fluxes generally decrease with height and they are approximately equal at the same height and friction velocity. The relation between upward (or downward) vertical sand mass flux and horizontal sand mass flux can be described by a power function. The present study is used to help understand the transport of ascending and descending sand particles. Copyright © 2016 John Wiley & Sons, Ltd.  相似文献   

13.
Soil erosion models are essential tools for the successful implementation of effective and adapted soil conservation measures on agricultural land. Therefore, models are needed that predict sediment delivery and quality, give a good spatial representation of erosion and deposition and allow us to account for various soil conservation measures. Here, we evaluate how well a modified version of the spatially distributed multi‐class sediment transport model (MCST) simulates the effectiveness of control measures for different event sizes. We use 8 year runoff and sediment delivery data from two small agricultural watersheds (0·7 and 3·7 ha) under optimized soil conservation. The modified MCST model successfully simulates surface runoff and sediment delivery from both watersheds; one of which was dominated by sheet and the other was partly affected by rill erosion. Moreover, first results of modelling enrichment of clay in sediment delivery are promising, showing the potential of MCST to model sediment enrichment and nutrient transport. In general, our results and those of an earlier modelling exercise in the Belgian Loess Belt indicate the potential of the MCST model to evaluate soil erosion and deposition under different agricultural land uses. As the model explicitly takes into account the dominant effects of soil‐conservation agriculture, it should be successfully applicable for soil‐conservation planning/evaluation in other environments. Copyright © 2008 John Wiley & Sons, Ltd.  相似文献   

14.
Growth of a permanent, valley‐bottom gully from 1964 to 2000 was determined annually from survey and sediment‐discharge data and compared with runoff and base?ow discharges. Data were analysed to test the hypothesis that rates of gully growth decay exponentially with time in response to shrinking catchment area caused by gully enlargement. Also, monthly values of growth rates and runoff, averaged over the 36‐year record, were analysed with mass‐wasting data to determine the extent to which colluvium availability affected growth rates seasonally. From 1964 to 2000, the gully volume increased by 9200 m3, accounting for 34 per cent of sediment yield from the watershed. There were tight power‐law relationships between annual growth rates and annual runoff, with runoff exponents of 1·57 and 1·30 for headward and volumetric growth, respectively. Increases in gully length, area, and volume were ?tted successfully assuming an exponential decay in growth rate with time. Rather than being due to a decrease in catchment area, however, the decline in growth rate was caused by a 77 per cent decrease in the ratio of runoff to base?ow, which also widened the gully and reduced the mean slope of its banks. Order‐of‐magnitude seasonal changes in erosion ef?ciency, de?ned as the fraction of stream power used to evacuate sediment from the gully, were roughly correlated with colluvium availability, as indicated by seasonal changes in the number of bank mass‐wasting events. No more than 2·2 per cent of stream power was used to evacuate sediment during any month. This study demonstrates the danger of attributing declining rates of gully growth to a shrinking catchment area if corroborative runoff and base?ow data are not available. Moreover, it illustrates that stream power alone provides only a rough and physically indirect measure of erosion potential. Copyright © 2004 John Wiley & Sons, Ltd.  相似文献   

15.
This paper presents an erosion model, ARMOUR, which simulates time‐varying runoff, erosion, deposition and surface armour evolution down a hillslope either as a result of a single erosion event or as the cumulative impact of many events over periods up to decades. ARMOUR simulates sediment transport for both cohesive and non‐cohesive soil and dynamically differentiates between ‘transport‐limited’ and ‘source‐limited’ processes. A variety of feasible processes for entrainment of different size classes can be modelled and evaluated against data. The generalized likelihood of uncertainty estimation (GLUE) technique was used to calibrate and validate ARMOUR using data collected during rainfall simulator experiments at two contrasting sites: (1) non‐cohesive stony sediments at Ranger Uranium Mine, Northern Territory, Australia; and (2) cohesive silty sediments at Northparkes Gold Mine, NSW, Australia. The spatial and temporal variations of model predictions within the individual runoff events showed that some entrainment processes could not model the spikes in concentration and subsequent depletion, while the hiding model of Andrews and Parker best simulated the concentration trends for both calibrated and independent runoff events. ARMOUR also successfully captured the coarsening of the surface material, though small, over the duration of the rainfall simulator trials. This was driven by the depletion of the finest size class of the soil. For a constant discharge, ARMOUR simulated higher sediment flux at the start of the storm with the sediment flux and concentration diminishing with time. For natural rainfall a power law relationship between sediment flux and discharge was observed. The calibration exercise showed that sediment concentration and discharge alone are insufficient to calibrate all aspects of the physics, in particular the armour depth. This appears to be because the armouring during the short duration events is driven by depletion of the finest classes of the sediments (diameters less then 62·5 mm), which are not normally measured. Copyright © 2006 John Wiley & Sons, Ltd.  相似文献   

16.
《国际泥沙研究》2021,36(6):723-735
This numerical modeling study (i) assesses the influence of the sediment erosion process on the sediment dynamics and subsequent morphological changes of a mixed-sediment environment, the macrotidal Seine estuary, when non-cohesive particles are dominant within bed mixtures (non-cohesive regime), and (ii) investigates respective contributions of bedload and suspended load in these dynamics. A three dimensional (3D) process-based morphodynamic model was set up and run under realistic forcings (including tide, waves, wind, and river discharge) during a 1-year period. Applying erosion homogeneously to bed sediment in the non-cohesive regime, i.e., average erosion parameters in the erosion law (especially the erodibility parameter, E0), leads to higher resuspension of fine sediment due to the presence of coarser fractions within mixtures, compared to the case of an independent treatment of erosion for each sediment class. This results in more pronounced horizontal sediment flux (two-fold increase for sand, +30% for mud) and erosion/deposition patterns (up to a two-fold increase in erosion over shoals, generally associated with some coarsening of bed sediment). Compared to observed bathymetric changes, more relevant erosion/deposition patterns are derived from the model when independent resuspension fluxes are considered in the non-cohesive regime. These results suggest that this kind of approach may be more relevant when local grain-size distributions become heterogeneous and multimodal for non-cohesive particles. Bedload transport appears to be a non-dominant but significant contributor to the sediment dynamics of the Seine Estuary mouth. The residual bedload flux represents, on average, between 17 and 38% of the suspended sand flux, its contribution generally increasing when bed sediment becomes coarser (can become dominant at specific locations). The average orientation of residual fluxes and erosion/deposition patterns caused by bedload generally follow those resulting from suspended sediment dynamics. Sediment mass budgets cumulated over the simulated year reveal a relative contribution of bedload to total mass budgets around 25% over large erosion areas of shoals, which can even become higher in sedimentation zones. However, bedload-induced dynamics can locally differ from the dynamics related to suspended load, resulting in specific residual transport, erosion/deposition patterns, and changes in seabed nature.  相似文献   

17.
Wind erosion is a key component of land degradation in vulnerable dryland regions. Despite a wealth of studies investigating the impact of vegetation and windbreaks on windflow in controlled wind‐tunnel and modelling environments, there is still a paucity of empirical field data for accurately parameterizing the effect of vegetation in wind and sediment transport models. The aim of this study is to present a general parameterization of wind flow recovery in the lee of typical dryland vegetation elements (grass clumps and shrubs), based on their height (h ) and optical porosity (θ ). Spatial variations in mean wind velocity around eight isolated vegetation elements in Namibia (three grass clumps and five shrubs) were recorded at 0.30 m height, using a combination of sonic and cup anemometry sampled at a temporal frequency of 10 seconds. Wind flow recovery in the lee of the elements was parameterized in an exponential form, . The best‐fit parameters derived from the field data were u 0 = u ref(0.0146θ ? 0.4076) and b = 0.0105θ + 0.1627 . By comparing this parameterization to existing models, it is shown that wind recovery curves derived from two‐dimensional wind fence experiments may not be suitable analogues for describing airflow around more complex, three‐dimensional forms. Field‐derived parameterizations such as the one presented here are a crucial step for connecting plant‐scale windflow behaviour to dryland bedform development at landscape scales. © 2016 The Authors. Earth Surface Processes and Landforms published by John Wiley & Sons Ltd.  相似文献   

18.
  相似文献   

19.
Soil loss caused by wind erosion is a widespread phenomenon in the Sahelian zone of West Africa. According to Sahelian farmers, scattered vegetation standing in amongst the crop has the potential for a wind erosion control strategy. This study was conducted to study the effect of single vegetation elements on the pattern of average wind speed and sediment transport. This was done by two experiments that were carried out during the rainy seasons of 2002 and 2003 in north Burkina Faso, West Africa. Wind speeds were measured using three sonic anemometers, at a sampling frequency of 16 Hz. Sediment transport was determined by calculating the mass fluxes from 17 MWAC catchers. In this study, a shrub was defined as a vegetation element with branches until ground and a tree as a vegetation element with a distinctive trunk below a canopy. Behind shrubs wind speed near the soil surface was reduced up to approximately seven times the height of the shrub. The observed reduction in wind speed in the area where wind speed was reduced was 15 per cent on average. At the sides of the shrub, wind speed was increased, by on average 6 per cent. As the area of increase in wind speed is one‐third of the area of decrease in wind speed, the net effect of a shrub is a reduction in wind speed. A similar pattern was visible for the pattern of sediment transport around a shrub. Downwind of a shrub, sediment transport was diminished up to seven times the height of the shrub. Probably most of this material was trapped by the shrub. Trees showed a local increase of wind around the trunk, which is expected to relate to an increase in sediment transport around the trunk. Mass flux measurements of sediment transport were not made, but visual observations in the field substantiate this. Behind the canopy of a tree, a tree acts similarly to a shrub regarding its effects on average wind speed, but as a tree is generally a larger obstacle than a shrub the extent of this effect is larger than for shrubs. Thus, whereas shrubs are more effective than trees regarding their direct effect on soil loss by trapping sand particles near the soil surface, trees are more effective in affecting soil loss indirectly by reducing the wind speed downwind more effectively than shrubs. Therefore, to reduce soil loss in an area, the presence of both trees and shrubs is crucial. Copyright © 2007 John Wiley & Sons, Ltd.  相似文献   

20.
We report bedload data and acoustic impulse measurements due to particle impact from the Pitzbach in Austria. Impulse counts can be viewed as a measure of the energy delivered to the bed by moving particles. Impulse counts show a large scatter even for the same discharge and bedload supply. This scatter is due to varying grain size distribution, grain shape, mode of transport of the sediment particles and spatial and temporal distribution of the sediment load. The mean impulse count at given hydraulic conditions may increase or decrease with increasing sediment supply, suggesting that both tools and cover effects are active on the channel bed. Dependent on the local balance between sediment supply and transport capacity, either effect may be dominant at different locations along the cross‐section at the same time. Furthermore, the same bed location may respond to increasing sediment supply as tools‐dominated at some discharges and cover‐dominated at other discharges. Our observations may have implications for modelling of bedrock erosion in landscape evolution models and of bedrock channel morphology. Erosion models that do not incorporate both tools and cover effects are not sufficient to describe observations. Furthermore, a local erosion law cannot in general be used to describe erosion averaged over the channel cross‐section. The changing balance between sediment supply and transport capacity with increasing discharge highlights that a single representative discharge is not sufficient to capture the full erosion dynamics. Copyright © 2008 John Wiley & Sons, Ltd.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号