共查询到20条相似文献，搜索用时 15 毫秒
1.
Lucija Boskovic Igor S. Altman Roger D. Braddock Igor E. Agranovski 《洁净——土壤、空气、水》2009,37(11):843-849
Elongated aerosol particle removal on fibrous filters has been investigated. It was shown that particle agglomerates are removed much more efficiently compared to the regularly shaped single particles with identical electrical mobility diameter at two filtration velocities tested. The experimental results were compared with the classical filtration theory and it was shown that the theoretical predictions, which are based on the assumption that the particles are spherical, are significantly different compared to an agglomerate filtration efficiency value. In order to account for a particle shape non-regularity, dominating nanoparticle removal mechanisms were firstly evaluated for a regular particle of certain size and then adjusted by fitting coefficients k1 (for diffusion component) and k2 (for interception). These coefficients were determined by fitting the theoretical values that gives the best coincidence with the measured data points. As was further demonstrated theoretically, the coefficient k1 is identical to the ratio of the actual particle surface area to the surface area of the spherical particle of the equivalent diameter. On the other hand, the coefficient k2 was found to be equal to the ratio of the projection of a given particle on a plane perpendicular to a streamline, to that of the spherical particle of the equivalent diameter. The reported findings would allow undertaking more accurate evaluation of the removal efficiency of non-regular aerosol particle, which is especially important for industrial applications where non-regular aerosols are frequently met. 相似文献
2.
The settling potential of fine sediment is known to be influenced by particle size, shape, density and porosity, and is commonly predicted using Stokes's law, despite its known limitations for modelling the behaviour of natural particles. In order to develop an improved understanding of the potential for fine sediment to settle out of suspension or undergo transport by hydraulic processes, it is important to examine the role of particle structure in detail. In this study, stepwise regression was used to identify which structural properties of particles exert an important control on fine sediment behaviour in river systems. The presence of composite particles and their associated particle size, porosity and fractal dimension were shown to be the most important controls on settling potential. Composite particles that form in the aquatic environment (flocs) were shown to have significantly different form and behaviour from composite particles of terrestrial origin (aggregates). Importantly, it was demonstrated that particle structure and behaviour exhibited consistencies between contrasting river catchments in different locations. An understanding of the mechanisms responsible for the formation of composite particles is viewed as providing a valuable input to efforts to model the mobilisation, transport and fate of fine sediment. Copyright © 2008 John Wiley & Sons, Ltd. 相似文献
3.
Fluvial suspended sediment typically consists of a variety of complex, composite particles referred to as flocs. Floc characteristics are determined by factors such as the source, size and geochemical properties of the primary particles, chemical and biological coagulation processes in the water column and shear stress and turbulence levels in the stream. Studies of floc morphology have used two contrasting methods of sampling and analysis. In the first method, particles settle on a microscope slide and are observed from below using an inverted microscope. The second method uses filtration at no or low vacuum and particles deposited on the filter are observed with a microscope. Floc morphology can be quantified using fractal dimensions. The aims of the present study were to examine the effect of the two sampling methods on the fractal dimensions of particle populations, and to evaluate for each method how well the fractal dimensions at the various sampling sites reflect basin conditions. Suspended solids were collected in triplicate on inverted microscope slides and on 0·45 μm Millipore HA filters in two southern Ontario streams with contrasting riparian zones during a minor runoff event resulting from the melt of a freshly fallen snowpack. An image analysis system was used to determine area, longest axis and perimeter of particles. The morphology of the particle population of each sample was characterized using four fractal dimensions (D, D1, D2 and DK). Systematic differences in fractal dimensions obtained with the two methods were observed. For the settling method, outlines of larger particles were frequently blurred because of the distance between the focal plane (the top of the inverted microscope slides) and the plane of the particle outline. In this method, the blurring of large particles can cause an increase in the projected area and length of the particle. The effect on the particle perimeter is unpredictable because it depends on the amount of detail lost through blurring and its effect on the apparent increase in particle size. Because of blurring, D and D1 tend to be systematically lower for the settling method, whereas the net effect on D2 is unpredictable. Particle size distributions derived from settling are typically coarser because small, low density particles may remain in the water column and all particles may not deposit on the slides. This loss of fines results in systematically lower DK values for the settling method compared with the filtration method. Fractal dimensions and particle size distributions obtained with the filtration method were sensitive to and clearly indicated differences between drainage basins and between sites within each basin. These differences were explained by basin characteristics and conditions. Fractal dimensions and particle size distributions obtained with the settling method were less sensitive to drainage basin characteristics and conditions, which limits their usefulness as process indicators. Copyright © 1999 John Wiley & Sons, Ltd. 相似文献
4.
Xia Zhenhuan. Professor Dept. Hydraulic Engineering. Tsinshua University. Song Genpei. Lecturer. kept. Hydraulic Engineering. Tsinghua University. Chen Yiping. Assistant. Dept. Hydraulic Engineerins Tsomghua University Wang Gang. Engineer. Research institute of Naval Engineering. PLA 《国际泥沙研究》1990,(1)
1. INTRODUCTIONAs a wide range of size distirbution including usually a certain POrtion of cohesive material is thecommon feature of the sediment constituting hyperconcentrated flows. it is desirable to study the settling properties of mixtures of cohesive and non--cohesjve sediment particles at high concentrations.Past studies on the settling of discrete particles in a suspension of fine cohesjve sediment is scarcein the literature. The Sediment Research Laboratory of Tsinghua Universi… 相似文献
5.
The different coagulation‐flocculation behavior of iron(III) and aluminum(III) to coagulate silica particle suspension with four coagulants — FeCl3, Fe2(SO4)3, AlCl3, and in our laboratory produced polyaluminum chloride PACl‐2.0 — was investigated through studying particle property changes and coagulation efficiency, for example, variations in zeta potential of particles, particle number, average particle diameter, particle size distribution, and residual turbidity of the supernatant water. Influences of flocculation intensity and pH value on the coagulation‐flocculation process were also studied. The results suggest that, under the test conditions, among these four coagulants FeCl3 possesses an obviously stronger ability to form larger flocs and to remove turbidity, on the other hand, PACl‐2.0 obviously showed a better charge neutralization ability. 相似文献
6.
7.
《Continental Shelf Research》2007,27(10-11):1408-1421
Particle size distribution and size-specific settling velocity are critical parameters for understanding the transport of fine sediment on continental margins. In this study, observed floc size versus settling velocity, volume distributions of particles 2 μm–1 cm in diameter, and calculated effective densities for all particle sizes provided estimates of the mass distribution in suspension, which is used to apportion mass among component particles, microflocs, and macroflocs. Measurements were made during relatively quiescent environmental conditions. Observations of size distributions based on mass demonstrate an increase in the component particle fraction through time. The increase in the percentage of component particles in suspension had implications on water column properties, as small changes in the component particle fraction affected water column optical transmission in a way that was not as easily detected by changes in the volume concentration distribution or total mass concentration. Flocs larger than 133 μm in diameter only comprised one quarter to one third of the mass in suspension. This finding may explain why suspension bulk clearance rates are often an order of magnitude lower than those predicted by other methods. 相似文献
8.
From soil aggregates to riverine flocs: a laboratory experiment assessing the respective effects of soil type and flow shear stress on particles characteristics 
下载免费PDF全文
下载免费PDF全文 Particles eroded from hillslopes and exported to rivers are recognized to be composite particles of high internal complexity. Their architecture and composition are known to influence their transport behaviour within the water column relative to discrete particles. To‐date, hillslope erosion studies consider aggregates to be stable once they are detached from the soil matrix. However, lowland rivers and estuaries studies often suggest that particle structure and dynamics are controlled by flocculation within the water column. In order to improve the understanding of particle dynamics along the continuum from hillslopes to the lowland river environment, soil particle behaviour was tested under controlled laboratory conditions. Seven flume erosion and deposition experiments, designed to simulate a natural erosive event, and five shear cell experiments were performed using three contrasting materials: two of them were poorly developed and as such can not be considered as soils, whilst the third one was a calcareous brown soil. These experiments revealed that soil aggregates were prone to disaggregation within the water column and that flocculation may affect their size distribution during transport. Large differences in effective particle size were found between soil types during the rising limb of the bed shear stress sequence. Indeed, at the maximum applied bed shear stress, the aggregated particles median diameter was found to be three times larger for the well‐developed soil than for the two others. Differences were smaller in the falling limb, suggesting that soil aggregates underwent structural changes. However, characterization of particles strength parameters showed that these changes did not fully turn soil aggregates into flocs, but rather into hybrid soil aggregate–floc particles. Copyright © 2013 John Wiley & Sons, Ltd. 相似文献
9.
In natural waters,exopolymers or extracellular polymeric substances(EPS) exuded by microorganisms interact with clay particles,resulting in the flocculation of clays and hence alteration to the properties of suspended cohesive sediments.To investigate and further understand how neutral EPS affect cohesive sediment transport and the final sediment yield,an experimental study was conducted on laboratory-prepared clay and guar gum(used as an analog for neutral EPS) suspensions to characterize EPS-induced flocculation and the settling velocity of resultant floes.Four different clays consisting of kaolinite,illite,Ca-montmorillonite,and Na-montmorillonite were studied to examine the influence of different layer charges on clay flocculation induced by neutral EPS.Floc size was determined by a laser particle size analyzer,and settling velocity estimated by analyzing the time-series floc settling images captured by an optical microscope.Results indicate that neutral EPS promote clay-EPS flocculation for all four clays with the particle/floc size significantly increased from～0.1-60μm to as large as～600μm.Clays’ layer charge has a profound influence on the clay-EPS flocculation.With the same floc size,the settling velocity of clay-EPS flocs is typically smaller than that of pure clay flocs,which is attributed to the reduced density of flocs caused by the EPS. However,for flocs of the same composition(e.g.pure clay or hybrid clay-EPS mixture),the settling velocity increases with size.The fractal dimension of these clay-EPS flocs estimated from settling velocity ranges from 1.39 to 1.47,which are smaller than that of pure clay flocs,indicating that these flocs are less compacted than the pure clay flocs. 相似文献
10.
11.
Jennifer Drummond Aslan Wright-Stow Paul Franklin John Quinn Aaron Packman 《水文研究》2020,34(21):4128-4138
Wood additions to streams can slow water velocities and provide depositional areas for bacteria and fine particles (e.g., particulate organic carbon and nutrients sorbed to fine sediment), therefore increasing solute and particle residence times. Thus, wood additions are thought to create biogeochemical hotspots in streams. Added wood is expected to enhance in-stream heterogeneity, result in more complex flow paths, increase natural retention of fine particles and alter the geomorphic characteristics of the stream reach. Our aim was to directly measure the impact of wood additions on fine particle transport and retention processes. We conducted conservative solute and fluorescent fine particle tracer injection studies in a small agricultural stream in the Whatawhata catchment, North Island of New Zealand in two reaches—a control reach and a reach restored 1-year earlier by means of wood additions. Fine particles were quantified in surface water to assess reach-scale (channel thalweg) and habitat-scale (near wood) transport and retention. Following the injection, habitat-scale measurements were taken in biofilms on cobbles and by stirring streambed sediment to measure fine particles available for resuspension. Tracer injection results showed that fine particle retention was greater in the restored compared to the control reach, with increased habitat-scale particle counts and reach-scale particle retention. Particle deposition was positively correlated with cobble biofilm biomass. We also found that the addition of wood enhanced hydraulic complexity and increased the retention of solute and fine particles near the wood, especially near a channel spanning log. Furthermore, particles were more easily remobilized from the control reach. The mean particle size remobilized after stirring the sediments was ~5 μm, a similar size to both fine particulate organic matter and many microorganisms. These results demonstrate that particles in this size range are dynamic and more likely to remobilize and transport further downstream during bed mobilization events. 相似文献
12.
《Continental Shelf Research》2006,26(17-18):2019-2028
Measurements of turbulence and suspended particulate matter (SPM) were measured over a 50 h period at a site in high tidal energy, mixed waters of the Irish Sea, NW European shelf. Turbulence parameters included both production (variance method from seabed ADCP) and dissipation (FLY profiler); SPM parameters included mass and volume concentrations and particle size (LISST 100 C). It is shown that the resultant SPM time series was due to a combination of time-varying turbulence at the measurement site and space-varying turbulence advecting through the site. Time asymmetry in turbulence at the site produced an asymmetric M4 signal in SPM volume concentration due to resuspension and disaggregation of flocs at times of peak turbulent energy. In terms of mass, the disaggregation contribution was 43% as much as the resuspension contribution near the bed, and 20% as much integrated throughout the water column. There was aggregation of flocs at high and low slack waters but the largest flocs occurred at low slack waters. Space-varying ambient turbulence was responsible for a horizontal gradient in floc size with small and large flocs at the high and low ends of the gradient, respectively; this generated a M2 signal in SPM properties. SPM concentrations and properties at any time resulted from combination of M2 and M4 variations which are responsible for the well-known twin peaks signature seen in transmissometer time series in tidal waters. 相似文献
13.
We hypothesize that anisotropy in soil properties arises from pore-scale heterogeneity caused by the alignment of aspherical soil particles. We developed a method to predict the permeability tensor from particle shape and packing structure. Digital geometry maps were created for the pore space in regular cubic and random packs of particles with various aspect ratios using a numerical packing algorithm. The lattice-Boltzmann method was used to simulate saturated flow through these packs, and the effect of particle shape and degree of alignment on the permeability tensor was characterized. Results show that the degree of anisotropy in permeability depends not only upon particle shape and alignment, but also on the three-dimensional structure of the pack. In random packs, more oblate particles and higher degrees of particle alignment lead to reduced permeability perpendicular to the direction of particle alignment compared to the direction parallel to particle alignment. 相似文献
14.
A new optical sensor, the airborne Polar Nephelometer, has been tested in an open wind tunnel. The wind tunnel was operated in cloudy conditions including either cloud water droplets or ice crystals, or a mixture of these particles. The sensor is designed to measure the optical and microphysical parameters of cloud particles sized from a few micrometers to about 500 m diameter. Basically, the probe measures the scattering phase function of an ensemble of cloud particles which intersect a collimated laser beam near the focal point of a paraboloidal mirror. From the measured scattering phase function the retrieval of the droplet-size spectra and subsequent derived quantities such as liquid water content and size parameters can be calculated using an inversion method. The particle phase discrimination (water droplets/ice particles) can be derived from the shape of the scattering phase function and the sensitivity of the probe allows the detection of small ice crystals (typically of 5 m diameter). The paper describes the preliminary results obtained by the prototype version of the Polar Nephelometer in various cloudy conditions. These results are compared with direct microphysical measurements obtained by usual PMS probes also mounted in the wind tunnel. Complementary results obtained in a cold chamber are presented in order to illustrate the reliability of the Polar Nephelometer in the presence of small ice crystals. 相似文献
15.
A novel and efficient protocol optimising deep‐bed filtration of surface water was developed. The innovation lies in ballasted‐flocculation filtration and an intermediate downwash. The approach is based on the assumption that kaolin particles with a partial positive charge may adsorb onto the surface of C. parvum oocysts and neutralize their negative charge. Application of this technology enhanced removal of inorganic particles and Cryptosporidium parvum oocysts by approximately 30 % and shortened the ripening stage of the filtration process from 1 h to about 10 min. 相似文献
16.
Flocculation has an important impact on particle trapping in estuarine turbidity maximum (ETM) through associated increases in particle settling velocity. To quantify the importance of the flocculation processes, a size-resolved flocculation model is implemented into an ocean circulation model to simulate fine-grained particle trapping in an ETM. The model resolves the particle size from robust small flocs, about 30 μm, to very large flocs, over 1000 μm. An idealized two-dimensional model study is performed to simulate along-channel variations of suspended sediment concentrations driven by gravitational circulation and tidal currents. The results indicate that the flocculation processes play a key role in generating strong tidal asymmetrical variations in suspended sediment concentration and particle trapping. Comparison with observations suggests that the flocculation model produces realistic characteristics of an ETM. 相似文献
17.
Crust strength: a wind tunnel study of the effect of impact by saltating particles on cohesive soil surfaces 总被引：1，自引：0，他引：1
A wind tunnel study examined the effect of distributions of saltating particles on sediment surfaces which were characterized by distributions of their tensile strength. The sediments consisted of varying proportions of large sand‐sized particles with a fine particle cement. The energies of the impacting particles and the surface strengths were compared with the mass of material lost from the surface. It is important to consider distributions of parameters rather than mean values only, since abrasion and erosion may occur from surfaces not predicted from average strength and saltation velocities. At the impact velocities used in this study (mean velocity 4·4 m s?1, with standard deviation of 0·51), surfaces containing less than 12 per cent fine material were easily eroded, but insignificant erosion occurred when the fine particle content exceeded 60 per cent. Small amounts of cementing material were easily ruptured, allowing the large sand grains to be moved (largely in creep) by the bombarding particles. A significant amount of energy was lost to the bed. As the percentage of fine material increased, the surface became more difficult to break up and less energy was lost to the bed. The probability that erosion will occur for known energy distributions of impacting particles and surface strength can be calculated and the mass loss increases exponentially with a decrease in the percentage of fine cementing particles. Copyright © 2001 John Wiley & Sons, Ltd. 相似文献
18.
19.
Lesley A. Warren Ann P. Zimmermann 《Aquatic Sciences - Research Across Boundaries》1994,56(4):348-362
We examined particle size distributions of suspended particulate matter (SPM); physical and environmental influences on the observed distributions; and relationships between particle size and geochemical partitioning of metals, over the fall and winter period in a small urban river (Don River, Toronto, Ontario, Canada). For this dataset, the majority of particles (80%) in suspension were less than 10 µm in size. In addition, while total SPM concentrations showed a positive trend with increasing discharge (Q); the proportions of particles found within given size classes were independent of both SPM concentration and Q. Temperature was the only measured environmental variable related to the particle concentrations within size classes. As water temperature increased, the concentration of particles in the smallest size class (1–4 µm) decreased, while the concentration of silt and/or algae sized particles (10–50 µm) increased. Increasing water temperatures may promote bacterial attachment to particles and their subsequent flocculation into larger sized particles. Decreasing concentrations of leachable (most labile) Cd, Zn and Mn were associated with increasing concentrations of the largest particles (70–150 µm) in suspension. In contrast, higher reducible (oxides) associated concentrations of Cd, Zn and Mn occurred with increasing concentrations of smaller particles (1–10 µm) in suspension. Both of these trends are speculated to reflect the importance of particle surface area for metal sorption reactions. 相似文献
20.
Research over the last decade has shown that the suspended sediment loads of many rivers are dominated by composite particles. These particles are also known as aggregates or flocs, and are commonly made up of constituent mineral particles, which evidence a wide range of grain sizes, and organic matter. The resulting in situ or effective particle size characteristics of fluvial suspended sediment exert a major control on all processes of entrainment, transport and deposition. The significance of composite suspended sediment particles in glacial meltwater streams has, however, not been established. Existing data on the particle size characteristics of suspended sediment in glacial meltwaters relate to the dispersed mineral fraction (absolute particle size), which, for certain size fractions, may bear little relationship to the effective or in situ distribution. Existing understanding of composite particle formation within freshwater environments would suggest that in‐stream flocculation processes do not take place in glacial meltwater systems because of the absence of organic binding agents. However, we report preliminary scanning electron microscopy data for one Alpine and two Himalayan glaciers that show composite particles are present in the suspended sediment load of the meltwater system. The genesis and structure of these composite particles and their constituent grain size characteristics are discussed. We present evidence for the existence of both aggregates, or composite particles whose features are largely inherited from source materials, and flocs, which represent composite particles produced by in‐stream flocculation processes. In the absence of organic materials, the latter may result solely from electrochemical flocculation in the meltwater sediment system. This type of floc formation has not been reported previously in the freshwater fluvial environment. Further work is needed to test the wider significance of these data and to investigate the effective particle size characteristics of suspended sediment associated with high concentration outburst events. Such events make a major contribution to suspended sediment fluxes in meltwater streams and may provide conditions that are conducive to composite particle formation by flocculation. Copyright © 2002 John Wiley & Sons, Ltd. 相似文献