共查询到20条相似文献，搜索用时 25 毫秒
1.
Permanent earthquake‐induced actions in buried pipelines: Numerical modeling and experimental verification 
下载免费PDF全文
下载免费PDF全文 《地震工程与结构动力学》2018,47(4):966-987
Buried pipelines are often constructed in seismic and other geohazard areas, where severe ground deformations may induce severe strains in the pipeline. Calculation of those strains is essential for assessing pipeline integrity, and therefore, the development of efficient models accounting for soil‐pipe interaction is required. The present paper is aiming at developing efficient tools for calculating ground‐induced deformation on buried pipelines, often triggered by earthquake action, in the form of fault rupture, liquefaction‐induced lateral spreading, soil subsidence, or landslide. Soil‐pipe interaction is investigated by using advanced numerical tools, which employ solid elements for the soil, shell elements for the pipe, and account for soil‐pipe interaction, supported by large‐scale experiments. Soil‐pipe interaction in axial and transverse directions is evaluated first, using results from special‐purpose experiments and finite element simulations. The comparison between experimental and numerical results offers valuable information on key material parameters, necessary for accurate simulation of soil‐pipe interaction. Furthermore, reference is made to relevant provisions of design recommendations. Using the finite element models, calibrated from these experiments, pipeline performance at seismic‐fault crossings is analyzed, emphasizing on soil‐pipe interaction effects in the axial direction. The second part refers to full‐scale experiments, performed on a unique testing device. These experiments are modeled with the finite element tools to verify their efficiency in simulating soil‐pipe response under landslide or strike‐slip fault movement. The large‐scale experimental results compare very well with the numerical predictions, verifying the capability of the finite element models for accurate prediction of pipeline response under permanent earthquake‐induced ground deformations. 相似文献
2.
The principal causes of earthquake-induced ground deformation are identified and their interaction with underground infrastructure, primarily pipelines and conduits, is described. The coupled forces normal and parallel to underground pipelines arising from earthquake-induced ground movement are evaluated, including a review of measured stresses on pipe surfaces during large-scale testing, evaluation of frictional forces related to soil-pipe interaction, and the resolution of interaction forces along and across pipelines. Methods for characterizing soil reaction to pipe lateral and vertical movements are presented. The maximum downward pipe force is only about one-third the maximum force determined with conventional bearing capacity equations, thus requiring changes in current analytical and design practice. The analytical results for pipeline response to strike-slip and normal fault rupture are shown to compare favorably with the results of both large-scale and centrifuge tests of soil-pipeline interaction simulating these types of severe ground deformation. 相似文献
3.
This paper deals with seismic wave propagation effects on buried segmented pipelines. A finite element model is developed for estimating the axial pipe strain and relative joint displacement of segmented pipelines. The model accounts for the effects of peak ground strain, shear transfer between soil and pipeline, axial stiffness of the pipeline, joint characteristics of the pipeline, and variability of the joint capacity and stiffness. For engineering applications, simplified analytical equations are developed for estimating the maximum pipe strain and relative joint displacement. The finite element and analytical solutions show that the segmented pipeline is relatively flexible with respect to ground deformation induced by seismic waves and deforms together with the ground. The ground strain within each pipe segmental length is shared by the joint displacement and pipe barrel strain. When the maximum ground strain is higher than 0.001, the pipe barrel strain is relatively small and can be ignored. The relative joint displacement of the segmented pipeline is mainly affected by the variability of the joint pullout capacity and accumulates at locally weak joints. 相似文献
4.
地震断层作用下的埋地管道等效分析模型 总被引：2，自引：0，他引：2
地震作用下,活动断层附近的埋地管道易发生强度屈服、局部屈曲或整体失稳等形式的破坏,建立准确、高效的埋地管道在断层作用下的计算模型,对管道的抗震设计和震后安全状态评估具有重要的实用价值。本文采用非线性弹簧模拟远离断层处埋地管道的反应,基于管土之间小变形段管道处于强化阶段,提出一种改进的管土等效分析模型,进一步减小了管土之间大变形段的分析长度,从而提高了有限元分析效率。该模型采用ALA推荐的方法计算管土间的滑动摩擦力,可以考虑土体种类的影响;用Kennedy方法确定管道的计算长度。通过与精确模型比较,验证了管土等效模型的合理性和有效性。 相似文献
5.
Probabilistic permanent fault displacement hazard via Monte Carlo simulation and its consideration for the probabilistic risk assessment of buried continuous steel pipelines 下载免费PDF全文
下载免费PDF全文 Permanent fault displacements (PFDs) because of fault ruptures emerging at the surface are critical for seismic design and risk assessment of continuous pipelines. They impose significant compressive and tensile strains to the pipe cross‐section at pipe‐fault crossings. The complexity of fault rupture, inaccurate mapping of fault location and uncertainties in fault‐pipe crossing geometries require probabilistic approaches for assessing the PFD hazard and mitigating pipeline failure risk against PFD. However, the probabilistic approaches are currently waived in seismic design of pipelines. Bearing on these facts, this paper first assesses the probabilistic PFD hazard by using Monte Carlo‐based stochastic simulations whose theory and implementation are given in detail. The computed hazard is then used in the probabilistic risk assessment approach to calculate the failure probability of continuous pipelines under different PFD levels as well as pipe cross‐section properties. Our probabilistic pipeline risk computations consider uncertainties arising from complex fault rupture and geomorphology that result in inaccurate mapping of fault location and fault‐pipe crossings. The results presented in this paper suggest the re‐evaluation of design provisions in current pipeline design guidelines to reduce the seismic risk of these geographically distributed structural systems. Copyright © 2016 John Wiley & Sons, Ltd. 相似文献
6.
The present paper addresses the mechanical behavior of buried steel pipes crossing active strike-slip tectonic faults. The pipeline is assumed to cross the vertical fault plane at angles ranging between zero and 45 degrees. The fault moves in the horizontal direction, causing significant plastic deformation in the pipeline. The investigation is based on numerical simulation of the nonlinear response of the soil–pipeline system through finite elements, accounting for large strains and displacements, inelastic material behavior of the pipeline and the surrounding soil, as well as contact and friction on the soil–pipe interface. Steel pipes with D/t ratio and material grade typical for oil and gas pipelines are considered. The analysis is conducted through an incremental application of fault displacement. Appropriate performance criteria of the steel pipeline are defined and monitored throughout the analysis. The effects of various soil and line pipe parameters on the mechanical response of the pipeline are examined. The numerical results determine the fault displacement at which the specified performance criteria are reached, and are presented in diagram form, with respect to the crossing angle. The effects of internal pressure on pipeline performance are also investigated. In an attempt to explain the structural behavior of the pipeline with respect to local buckling, a simplified analytical model is also developed that illustrates the counteracting effects of pipeline bending and axial stretching for different crossing angles. The results from the present study can be used for the development of performance-based design methodologies for buried steel pipelines. 相似文献
7.
Polynikis Vazouras Spyros A. Karamanos Panos Dakoulas 《Soil Dynamics and Earthquake Engineering》2010
The present paper investigates the mechanical behavior of buried steel pipelines, crossing an active strike-slip tectonic fault. The fault is normal to the pipeline direction and moves in the horizontal direction, causing stress and deformation in the pipeline. The interacting soil–pipeline system is modelled rigorously through finite elements, which account for large strains and displacements, nonlinear material behavior and special conditions of contact and friction on the soil–pipe interface. Considering steel pipelines of various diameter-to-thickness ratios, and typical steel material for pipeline applications (API 5L grades X65 and X80), the paper focuses on the effects of various soil and pipeline parameters on the structural response of the pipe, with particular emphasis on identifying pipeline failure (pipe wall wrinkling/local buckling or rupture). The effects of shear soil strength, soil stiffness, horizontal fault displacement, width of the fault slip zone are investigated. Furthermore, the influence of internal pressure on the structural response is examined. The results from the present investigation are aimed at determining the fault displacement at which the pipeline fails and can be used for pipeline design purposes. The results are presented in diagram form, which depicts the critical fault displacement, and the corresponding critical strain versus the pipe diameter-to-thickness ratio. A simplified analytical model is also developed to illustrate the counteracting effects of bending and axial stretching. The numerical results for the critical strain are also compared with the recent provisions of EN 1998-4 and ASCE MOP 119. 相似文献
8.
The performance of pipelines subjected to permanent strike–slip fault movement is investigated by combining detailed numerical simulations and closed-form solutions. First a closed-form solution for the force–displacement relationship of a buried pipeline subjected to tension is presented for pipelines of finite and infinite lengths. Subsequently the solution is used in the form of nonlinear springs at the two ends of the pipeline in a refined finite element model, allowing an efficient nonlinear analysis of the pipe–soil system at large strike–slip fault movements. The analysis accounts for large strains, inelastic material behavior of the pipeline and the surrounding soil, as well as contact and friction conditions on the soil–pipe interface. The numerical models consider infinite and finite length of the pipeline corresponding to various angles β between the pipeline axis and the normal to the fault plane. Using the proposed closed-form nonlinear force–displacement relationship for buried pipelines of finite and infinite length, axial strains are in excellent agreement with results obtained from detailed finite element models that employ beam elements and distributed springs along the pipeline length. Appropriate performance criteria of the steel pipeline are adopted and monitored throughout the analysis. It is shown that the end conditions of the pipeline have a significant influence on pipeline performance. For a strike–slip fault normal to the pipeline axis, local buckling occurs at relatively small fault displacements. As the angle between the fault normal and the pipeline axis increases, local buckling can be avoided due to longitudinal stretching, but the pipeline may fail due to excessive axial tensile strains or cross sectional flattening. Finally a simplified analytical model introduced elsewhere, is enhanced to account for end effects and illustrates the formation of local buckling for relative small values of crossing angle. 相似文献
9.
Some lifelines, such as gas and oil transmission lines and water and sewer pipelines, have been damaged in recent earthquakes. The damages of these lifelines may cause major, catastrophic disruption of essential services for human needs. Large abrupt differential ground movements that result from an active fault present one of the most severe effects of an earthquake on a buried pipeline system. Although simplified analysis procedures for buried pipelines across strike-slip fault zones that cause tensile failure of the pipeline have been proposed, the results are not accurate enough because of several assumptions involved, such as the omission of flexural rigidity of the pipe, simplification of soil resistant characteristics, etc. Note that the omission of flexural rigidity cannot satisfy equilibrium conditions for pipelines across a ‘reverse’ strike-slip fault that causes compressions in the pipeline. This paper presents a refined analysis procedure for buried pipelines that is applicable to both strike-slip and reverse strikeslip faults after modifying some of the assumptions used previously. Based on the analytical results, this paper also discusses the design criteria for buried pipelines which are subjected to various fault movements. Parametric responses of buried pipeline for various fault movements, angles of crossing, buried depths and pipe diameters are presented. 相似文献
10.
在考虑管道的材料非线性和几何非线性、管土相互作用的非线性和管道接口非线性的基础上,建立了由管体梁单元、三向土弹簧单元和接口单元组成的埋地非连续管道在断层位移作用下的有限元模型,并以美国密歇根大学Junhee等(2010)所做的跨断层水泥管试验为原型进行了模拟分析。有限元结果给出的水泥管最终变形、接口转角、接口位移与实验结果基本一致,表明本文提出的跨断层埋地非连续管道抗震计算的有限元分析方法具有一定的合理性。有限元结果和试验结果都表明,在逆冲断层作用下,水泥管的破坏主要是因为在管道接口处的轴向压力和弯矩的耦合作用,在断层附近的管道接口承受了较大的转动和压缩位移。本文所提出的分析方法可推广到埋地非连续管道在其它永久地面变形作用下的有限元分析。 相似文献
11.
利用有限元软件ABAQUS,结合用户自定义Python程序,开展地震断层作用下深海管道局部变形和压溃过程的数值模拟。分析均质土体和随机分布土体模型的地震断层位移大小对管道局部变形的影响,并分析断层诱发的局部挤压变形对管道压溃压力的影响。研究表明:相比于断层走向与管道轴线方向垂直的走滑断层,断层走向与管道轴线方向夹角为45°的走滑断层作用下管道的压溃压力较小,且当断层走向为管道轴线方向逆时针旋转45°时,左旋走滑断层作用下管道的压溃压力低于右旋走滑断层作用下的管道压溃压力。断层位移相同时,管道径厚比越大,压溃压力越小。考虑土壤随机性时,由于APIX65钢制管道刚性较大,且管道两侧土体内聚力和摩擦角分散于均质土壤土体参数均值两侧,因此断层作用过程中管道受到的土压力在均质土壤模型中的土压力数值处上下波动。 相似文献
12.
沉陷区域埋地管线数值模拟分析 总被引：4，自引：0，他引：4
场地的不均匀沉陷是导致埋地管线破坏的重要原因之一。本文考虑了材料非线性、几何非线性以及管土接触非线性,将管线计算分析模型模拟为四节点薄壳单元结构,周围填覆土体采用八节点六面体单元划分。管土相互作用模拟为三维刚性与柔性的面面接触单元结构,并采用线性位移加载来模拟土体的沉陷作用,对三维薄壳有限元模型进行数值计算分析。通过比较不同参数,如沉陷长度、沉陷深度、埋深、管径、径厚比、土特性等对管线的反应影响,得出管线在沉陷情况下的应力和应变的关系,通过算例分析,说明了该方法能更好地模拟管线的破坏过程,该方法将为沉陷区域埋地管线数值模拟提供理论分析依据。 相似文献
13.
Local gas pipelines provide a valuable resource to urban areas and are often forced to cover unfavourable ground conditions in order to form a serviceable network. This can force pipelines through soil, which is subjected to permanent ground displacements due to faulting and strong vibrations due to earthquakes. Due to the inseparability of faulting from earthquakes it is pertinent to examine the combined effect of dynamic vibration and shear deformation of the surrounding soil on buried pipelines and a better understanding of the factors affecting pipe response to these inputs will enable more intelligent design of future pipe networks with the intention of reducing damage inflicted on pipes in extreme events. To advance understanding of this topic, a series of model experiments were performed under 1 g conditions on instrumented 20 mm diameter acrylic prototype pipes buried in dry Toyoura sand as well as a tyre derived aggregate (TDA) backfill trench surrounded by Toyoura sand crossing a vertical fault. The apparatus setup allowed faulting and dynamic input to be applied simultaneously to the model, which revealed that the simultaneous loading reduces the bending of a pipe and that installation of a pipe in a tyre derived aggregate backfill reduces the bending moment experienced by the pipe by up to 74% for small fault displacement and low levels of acceleration. 相似文献
14.
跨断层隔震管道管端与土体相互作用分析 总被引：1，自引：0，他引：1
断层错动是造成埋地管道破坏的重要因素之一,因此,跨断层埋地管道在断层错动下的破坏机制、模型设计与参数分析和管道抗断层措施一直是生命线工程的前沿问题。对跨断层管道内力分析取得的成果较多,比较经典的是Newm ark-Hall方法、Kennedy方法和王汝梁方法,后来又出现基于壳模型的有限元分析方法。现有的管道抗断层措施具有其优点的同时亦有其不足。本文基于壳模型的有限元动力数值模拟,对一种管道跨断层隔震措施进一步研究,考虑管端与土体相互作用计算隔震管段的断层错动响应。计算结果表明拉应变容易在土中的管段传递,相比较而言,压应变不容易在土中的管段传递;最大拉应变降低比较多,最大压应变降低比较少。根据分析结果,对跨断层隔震管段边界条件的选取提出建议。 相似文献
15.
穿越逆冲断层的埋地管道非线性反应分析 总被引：2，自引：0，他引：2
穿越逆冲断层的埋地管道在地震作用下,容易发生局部屈曲或整体失稳等形式的破坏,研究逆冲断层作用下的埋地管道地震反应规律,对管道抗震设计及施工等具有重要的意义。本文将埋地管线及周围土体从半无限地球介质中取出,分别以空间薄壳单元和实体单元进行离散,采用非线性接触力学方法模拟管、土之间的滑移、分离及闭合现象;采用线性位移加载模拟断层的错动,考虑了系统初始应力状态的影响,对土体未开裂前的管土相互作用系统进行了拟静力数值分析;分析了位错量、土体刚度、埋设深度、径厚比及跨越角度对埋地管道反应的影响,得出了一些有益的结论。 相似文献
16.
A new remediation technique is proposed to mitigate large deformations imposed on buried pipeline systems subject to permanent ground deformation. With this technique, low-density gravel (LDG) with high porosity, such as pumice, is used as backfill in the trench containing the pipe near an area susceptible to PGD. This countermeasure decreases soil resistance, soil-pipe interaction forces and strain on the pipe as the pipeline deformation mechanism changes to a more desirable shape. Expanded polystyrene geofoam has been introduced to decrease the density of the pipeline backfill; however, LDG is more efficient regarding workability during construction, environmental effects, durability, fire safety, and cost-effectiveness. A series of centrifuge model experiments in which the pipelines were subjected to reverse faulting was conducted to evaluate the proposed method. During faulting, the axial and bending strain and pipe deflection were measured. A comparison of the responses of the remediated pipeline and the pipeline without remediation indicates that the proposed technique substantially mitigates the effects of large deformation.
相似文献17.
In this paper, a nonlinear stochastic seismic analysis program for buried pipeline systems is developed on the basis of a probability density evolution method (PDEM). A finite element model of buried pipeline systems subjected to seismic wave propagation is established. The pipelines in this model are simulated by 2D beam elements. The soil surrounding the pipelines is simulated by nonlinear distributed springs and linear distributed springs along the axial and horizontal directions, respectively. The joints between the segmented pipes are simulated by nonlinear concentrated springs. Thereafter, by considering the basic random variables of ground motion and soil, the PDEM is employed to capture the stochastic seismic responses of pipeline systems. Meanwhile, a physically based method is employed to simulate the random ground motion field for the area where the pipeline systems are located. Finally, a numerical example is investigated to validate the proposed program. 相似文献
18.
跨越断层埋地管线地震反应数值分析 总被引：9，自引：2，他引：7
跨越断层埋地管线在地震中的破坏是非常严重的,地震本身和管土相互作用体系中都存在很多不确定性因素,所以管线在断层运动过程中反应比较复杂。本文利用有限元理论和数值模拟手段,建立了管土作用模型,采用非线性接触问题研究方法详细地分析了管线由断层运动而产生的反应,对影响管线的各种因素进行了分析,包括位错量、跨越角度、断层运动形式、埋设深度、初始轴向力、断层裂缝宽度、填覆土质和管径。通过研究,得到一些初步结论。 相似文献
19.
Seismic ground faulting is the greatest hazard for continuous buried pipelines.Over the years,researchers have attempted to understand pipeline behavior mostly via numerical modeling such as the finite element method.The lack of well-documented field case histories of pipeline failure from seismic ground faulting and the cost and complicated facilities needed for full-scale experimental simulation mean that a centrifuge-based method to determine the behavior of pipelines subjected to faulting is best to verify numerical approaches.This paper presents results from three centrifuge tests designed to investigate continuous buried steel pipeline behavior subjected to normal faulting.The experimental setup and procedure are described and the recorded axial and bending strains induced in a pipeline are presented and compared to those obtained via analytical methods.The influence of factors such as faulting offset,burial depth and pipe diameter on the axial and bending strains of pipes and on ground soil failure and pipeline deformation patterns are also investigated.Finally,the tensile rupture of a pipeline due to normal faulting is investigated. 相似文献
20.
埋地管道地震作用下的破坏因素源于地震引起的永久地面变形(PGD),其中管道-土体间相互作用决定土体位移作用到管体的大小。利用离心机试验技术模拟埋地管道在逆断层大位移下的反应特性,重点讨论断层与管道的交角、断层位移大小、管土相互作用、管径和埋深五个参数对管道破坏的影响水平。实验结果表明:上述参数对管道断层作用的反应均有明显影响,其中断层的位移量、管土相互作用、埋深和管径的影响更为显著。本文的研究结果对于管道经过断层区的抗震设计有十分重要的意义。 相似文献