共查询到20条相似文献，搜索用时 46 毫秒
1.
This paper presents how faster two dimensional (2-D) tomography of soil layers is obtained in geotechnical characteristics through multi-channel analysis of surface wave (MASW) method. MASW is developed as a new technique incorporating multiple receivers and 2-D wave-field transformations to obtain better performance in surface wave analysis. Incorporating 2-D tomography technique with multi-channel analysis offers an efficient and cost effective technique in soil site investigations. In the previous research, the Geo-SW@T software was designed and developed with collecting a lot of records including programming array technique to show the 2-D tomography in near surface soil profiling. To make a 2-D tomography of soil profile based on the past planned MASW technique is time consuming for collecting large database through 2-D array of programming language. In this paper, a new idea is established to obtain faster performance in soil tomography profile using array and sub-array technique in MASW. The performance of newly developed tomography technique with MASW method is estimated as faster and important tomography system for using one single record in soil characterizations rather than arranging of multiple records. 相似文献
2.
Multichannel analysis of surface waves (MASW) survey was conducted to measure shear wave velocities in order to ascertain the likely causes of road failure along LASU-IBA expressway in Alimosho local government area, Lagos, Nigeria. MASW data were acquired along the express road. The acquired dataset was processed and transformed into two-dimensional structure reflective of depth and surface wave velocity distribution within a depth of investigation using SurfSeis software. The MASW shear wave velocity data were compared to geophysical data that was acquired along the same profile. The comparison was also done with geotechnical data that had been acquired prior to the study some meters away from the study area. The correlation between N values to measured shear wave velocity using MASW was generated. The comparison illustrates the accuracy and consistency of MASW-derived shear wave velocity profiles. We concluded that (1) the low-velocity region that varies between 100 and 250 m/s at surface down to 4 m beneath the surface is characterized by loose/peat materials and may have been responsible for the road failure within the study area; this region depicts a very loose compaction area. (2) The MASW technique is a time–cost-effective tool for obtaining reliable shear wave velocity profiles, and (3) the MASW is particularly attractive in areas that cannot be readily assessed by other geophysical and geotechnical tools. 相似文献
3.
横波速度由于更能直接反映岩石的物理性质,从而在许多工程、环境和地下水勘查中有重要作用.多道面波分析方法(MASW)是一种新技术,通过求得的一维近地表横波速度剖面构建一个二维横波速度场,从而准确探测近地表介质情况.针对该方法数据的采集,提出了一种检波器排列自动安置的技术(自动安置排列),即使用牵引车辆的液压驱动装置在几秒内自动安置几十个检波器,并将其与传统安置排列的方法做了比较,结果表明,自动安置排列技术可用于多道面波分析方法,而且可以大大减少多道面波分析方法的采集时间和费用. 相似文献
4.
The dispersive characteristics of Rayleigh type surface waves were utilized to estimate shear wave velocity (Vs) profile followed by imaging the shallow subsurface granitic layers in the heart of Hyderabad. The reliability of Multichannel Analysis of Surface Waves (MASW) depends on the accurate determination of phase velocities for horizontally traveling fundamental mode Rayleigh waves. Multichannel recording leads to effective identification and isolation of various factors of noise. Calculating the 1-D shear wave velocity (Vs) field from surface waves ensures high degree of accuracy irrespective of cultural noise. The main advantage of mapping the bed rock surface with shear wave velocity (Vs) is the insensitivity of MASW to velocity inversion besides being free from many constraints such as contrast in physical properties etc. Modeling of surface waves data results a shear wave velocity (Vs) of 250?C750 m/s covering the top soil to weathering and up to bedrock corresponding to a depth range of 10?C30 m. Further, the computed N values (which is an indicator of site characteristic) based on the harmonic shear wave velocity up to a depth of 5 m is found to be quite high (> 25?C30) well above 5 indicating the site to be safe and strong enough and not prone to liquefaction. A pair of selected set of results over granites are presented here as a case study highlighting the salient features of MASW. 相似文献
5.
6.
Shear wave velocity is one of the most important input parameter in the analysis of geotechnical earthquake engineering problems,
particularly to estimate site-specific amplification factor and ground response study. Dynamic in situ tests such as spectral
analysis of surface waves (SASW) or multichannel analysis of surface waves (MASW) are very expensive. Also due to lack of
specialized personnel, these tests are generally avoided in many soil investigation programs. Worldwide, several researchers
have developed correlations between the SPT ‘N’ value and shear wave velocity ‘V
s’, which are useful for determining the dynamic soil properties. In the present study, more than 400 numbers of soil borehole
data were collected from various geotechnical investigation agencies, government engineering institutes and geotechnical laboratories
from different parts of Mumbai city, which is financial capital of India with highest population density. In this paper, an
attempt has been made to develop the correlation between the SPT ‘N’ value and shear wave velocity ‘V
s’ for various soil profile of Mumbai city and compared with other existing correlations for different cities in India. Using
Geographical Information System (GIS), a geospatial contour map of shear wave velocity profile for Mumbai city is prepared
with contour intervals of 25 and 50 m/s. The scarcity of database or maps of shear wave velocity profile for Mumbai city will
make the present geospatial contour maps extremely useful and beneficial to the designer, practitioners for seismic hazard
study involved in geotechnical earthquake engineering. 相似文献
7.
Narasimman Sundararajan T. Seshunarayana 《Journal of the Geological Society of India》2018,92(3):259-264
It is well known that the potential hazard during an earthquake is mainly in alluvium or alluvium filled basins; shear wave velocity plays a significant role in estimating the possible hazard during an earth quake in such an area. This paper presents shear wave velocity profile from Jabalpur, Central India mainly dominated by alluvial soil that was moderately affected by an earthquake of magnitude 6.5 in May, 1997. The acquired shear wave velocity by Multichannel Analysis of Surface Wave (MASW) in as many as 36 sites over alluvial soil ranges from 200 m/sec to 400 m/sec and in a few sites marginally less than 200 m/sec corresponding to a sub-surface depth of 30–35 m. Further, the computed N values vary as low as near zero to less than 25. The study is substantiated by the estimation of P-wave velocity by refraction seismic method at the same locations of MASW which ranges from 350 m/sec to 2200 m/sec. The results suggest that the damage during an earth quake appears to be highly unlikely in view of the marginally high Vs up to depth of 30 m. This study on seismic hazard is substantiated by the estimation of frequency of the ground as well as amplification which is found to be a maximum of about 2.5 in the frequency band of 2–6 Hz in west and north western portion of the study area. 相似文献
8.
9.
Shear wave velocity (V S) estimation is of paramount importance in earthquake hazard assessment and other geotechnical/geo engineering studies. In our study, the shear wave velocity was estimated from ground roll using multichannel analysis of surface wave (MASW) technique making use of dispersive characteristics of Rayleigh type surface waves followed by imaging the shallow subsurface basaltic layers in an earthquake-prone region near Jabalpur, India. The reliability of MASW depends on the accurate determination of phase velocities for horizontally traveling fundamental mode Rayleigh waves. Inversion of data from surface waves resulted in a shear wave velocity (V S) in the range of 200–1,200 m/s covering the top soil to weathering and up to bedrock corresponding to a depth of 10–30 m. The P-wave velocity (V P) obtained from refraction seismic studies at these locations found to be comparable with V S at an assumed specific Poisson’s ratio. A pair of selected set of V S profiles over basalt which did not result in a hazardous situation in an earthquake of moderate magnitude are presented here as a case study; in other words, the shear wave velocity range of more than 200 m/s indicate that the area is highly unlikely prone to liquefaction during a moderate or strong earthquake. The estimated depth to basalt is found to be 10–12 m in both the cases which is also supported by refraction studies. 相似文献
10.
The purpose of this study is to evaluate the efficacy of using seismic attributes to detect near-surface cavities. The methods used in this study include interpreting dispersion curves and amplitude mapping of the multichannel analysis of surface wave (MASW) technique and interpreting the delay in first arrivals of compressional waves. To test these methods, a seismic survey was conducted above a known near-surface cavity in Al-Suman Area, Saudi Arabia. The cause of the cavity is carbonization in the area; there are many cavities similar to this one. The seismic data were collected using a seismograph system with 48 vertical geophones. Both techniques show a tangible result for detecting the cavity. The 2D section of shear wave velocity, which was obtained by inverting the dispersion curves from the MASW technique, leads us to determine the shape of the cavity, as described by a low-velocity zone. Frequency against relative offset is plotted and shows a significant frequency drop in the presence of the cavity, which also provides an indication to the presence of cavity underneath. This interpretation is matched by the interpretation of observed delays in first arrivals of compressional waves. The integration of both P wave seismic refraction and MASW gives confidence in the result and matches observations of the existing cavity closely. 相似文献
11.
Jianghai Xia Richard D Millerg Xu Yixian Luo Yinhe Chen Chao Liu Jiangping Julian Ivanov Chong Zeng 《中国地质大学学报(英文版)》2009,20(3)
High-frequency (≥2 Hz) Rayleigh-wave data acquired with a multichannei recording sys-tem have been utilized to determine shear (S)-wave velocities in near-surface geophysics since the early 1980s. This overview article discusses the main research results of high-frequency surface-wave tech-niques achieved by research groups at the Kansas Geological Survey and China University of Geosciences in the last 15 years. The multichannel analysis of surface wave (MASW) method is a nou-iuvasive acoustic approach to estimate near-surface S-wave velocity. The differences between MASW results and direct borehole measurements are approximately 15% or less and random. Studies show that simultaneous inversion with higher modes and the fundamental mode can increase model resolution and an investigation depth. The other important seismic property, quality factor (Q), can also be estimated with the MASW method by inverting attenuation coefficients of Rayleigh waves. An inverted model (S-wave velocity or Q) obtained using a damped least-squares method can be assessed by an optimal damping vector in a vicinity of the inverted model determined by an objective function, which is the trace of a weighted sum of model-resolution and model-covariance matrices. Current developments include modeling high-frequency Rayleigh-waves in near-surface media, which builds a foundation for shallow seismic or Rayleigh-wave inversion in the time-offset domain; imaging dispersive energy with high resolution in the frequency-velocity domain and possibly with data in an arbitrary acquisition geometry, which opens a door for 3D surface-wave techniques; and successfully separating surface-wave modes, which provides a valuable tool to perform S-wave velocity profiling with high-horizontal resolution. 相似文献
12.
This paper shows the presence of noises and technique to reduce these noises during the surface wave analysis. The frequency-dependent properties of Rayleigh-type surface waves can be used for imaging and characterizing the shallow subsurface. Interference by coherent source-generated noise inhibits the reliability of shear-wave velocities determined through inversion of the phase velocities of Rayleigh waves. Among these interferences by non-planar, non-fundamental mode Rayleigh waves (noise) are body waves, scattered and non-source-generated surface waves, and higher-mode surface waves. For the reduction of noise, the filtering technique is implemented in this paper for the multichannel analysis of surface wave method (MASW). With the de-noising technique during the MASW method, more robust and reliable outcome is achieved. The significance of this paper is to obtain pre-awareness about noises during surface wave analysis and take better outcomes with de-noising performance in near surface soil investigations. 相似文献
13.
In the present study, an attempt has been made to evaluate the seismic hazard considering local site effects by carrying out detailed geotechnical and geophysical site characterization in Bangalore, India to develop microzonation maps. An area of 220 km2, encompassing Bangalore Mahanagara Palike (BMP) has been chosen as the study area. Seismic hazard analysis and microzonation of Bangalore are addressed in three parts: in the first part, estimation of seismic hazard is done using seismotectonic and geological information. Second part deals with site characterization using geotechnical and shallow geophysical techniques. In the last part, local site effects are assessed by carrying out one-dimensional (1-D) ground response analysis (using the program SHAKE2000) using both standard penetration test (SPT) data and shear wave velocity data from multichannel analysis of surface wave (MASW) survey. Further, field experiments using microtremor studies have also been carried out for evaluation of predominant frequency of the soil columns. The same has been assessed using 1-D ground response analysis and compared with microtremor results. Further, the Seed and Idriss simplified approach has been adopted to evaluate the soil liquefaction susceptibility and liquefaction resistance assessment. Microzonation maps have been prepared with a scale of 1:20,000. The detailed methodology, along with experimental details, collated data, results and maps are presented in this paper. 相似文献
14.
15.
Fathy Shaaban Ahmed Ismail Usama Massoud Hany Mesbah Ahmed Lethy Abbas Mohamed Abbas 《Arabian Journal of Geosciences》2013,6(12):4961-4972
The flood plain of the Nile River has been a safe dwelling throughout history. Recently with a growing population and vast growing urbanization, some buildings have started to experience structural damages, which are not related to their construction design, but rather to the ground conditions around the buildings' foundations. Variations in properties of the soil supporting the buildings' foundations such as soil-bearing capacity, moisture content, and scouring may eventually lead to the failure of these buildings. This study is attempting to characterize the variations in the soil properties around the City Star shopping mall, in eastern Cairo, where a large building has tilted over the past few years. This tilting may lead to the collapse of the whole building if it continues at the same rate. An integrated geophysical investigation including multi-channel analysis of surface wave (MASW), ground-penetrating radar (GPR), and 2-D electrical resistivity tomography (ERT) was used around the affected building to help detect possible causes of deterioration. The GPR data showed a soil-filled layer overlaying a thick bottom layer of higher moisture content. The MASW data revealed a middle layer of relatively low shear wave velocity sandwiched between two relatively high shear wave velocity layers. The ERT data showed an upper low resistivity layer overlying a high resistivity layer. Integrating the interpretations of the three geophysical methods provides a combined model that reflects lateral and vertical variation in the soil properties. This variation becomes dramatic near the tilted corner of the building. 相似文献
16.
Use of Surface Waves in Statistical Correlations of Shear Wave Velocity and Penetration Resistance of Chennai Soils 总被引：1，自引：0，他引：1
R. Uma Maheswari A. Boominathan G. R. Dodagoudar 《Geotechnical and Geological Engineering》2010,28(2):119-137
Shear wave velocity (V
s) is one of the most important input parameter to represent the stiffness of the soil layers. It is preferable to measure
V
s by in situ wave propagation tests, however it is often not economically feasible to perform the tests at all locations. Hence,
a reliable correlation between V
s and standard penetration test blow counts (SPT-N) would be a considerable advantage. This paper presents the development
of empirical correlations between V
s and SPT-N value for different categories of soil in Chennai city characterized by complex variation of soil conditions. The
extensive shear wave velocity measurement was carried out using Multichannel Analysis of Surface Waves (MASW) technique at
the sites where the SPT-N values are available. The bender element test is performed to compare the field MASW test results
for clayey soils. The correlations between shear wave velocity and SPT-N with and without energy corrections were developed
for three categories of soil: all soils, sand and clay. The proposed correlations between uncorrected and energy corrected
SPT-N were compared with regression equations proposed by various other investigators and found that the developed correlations
exhibit good prediction performance. The proposed uncorrected and energy corrected SPT-N relationships show a slight variation
in the statistical analysis indicating that both the uncorrected and energy corrected correlations can predict shear wave
velocity with equal accuracy. It is also found that the soil type has a little effect on these correlations below SPT-N value
of about 10. 相似文献
17.
Faisal Rehman Sherif M. El-Hady Ali H. Atef Hussein M. Harbi 《Arabian Journal of Geosciences》2016,9(8):519
The present study deals with the seismic site classification of Bahrah area, Wadi Fatima, to characterize the local site conditions. The dynamic behavior of sediments was studied by the application of surface wave inversion. The multichannel analysis of surface waves (MASW) shallow geophysical technique was utilized for site classification. MASW survey was carried out at 66 sites along with 13 seismic refraction profiles at suitable localities. MASW and seismic refraction profiles were processed and compared with the available borehole data. The integration of MASW techniques with seismic refraction and borehole data progressively enhanced the subsurface visualization and reliability of the shear wave velocity estimation in the subsurface in the study area. The subsurface shear-wave velocity model was achieved by the solution of an inverse problem-based dispersion of surface waves and propagation in a vertically heterogeneous medium. The 2D genetic algorithm was employed for the inversion of dispersion curves to obtain velocity and thickness of subsurface layers. The depth to engineering bedrock and velocity of shear waves in the first 30 m was deciphered and mapped. The depth of bedrock in study area varies from 4 to 30 m, and V S 30 ranges from 320 to 800 m/s. The most of study area falls in B and C class categories in addition to few sites of D class according to the NEHRP guidelines. 相似文献
18.
深圳地区部分岩土类型剪切波速与深度的关系分析 总被引：14，自引：0，他引：14
本文对深圳市部分岩土类型的剪切波速与埋深的关系进行了相关分析。在分析中, 考虑了岩土成因、岩土类型、物理状态和场地所处的地貌类型对剪切波速的影响, 取得了对岩土工程有指导意义的重要结果。 相似文献
19.
G. S. Srinivas K. Goverdhan Ch. Narsimhulu T. Seshunarayana 《Journal of the Geological Society of India》2014,84(2):174-180
Multichannel analysis of surface waves (MASW) is a non-destructive seismic prospecting method utilizing Rayleigh waves for imaging and characterizing shallow sub-surface structure. Multichannel analysis of surface waves (MASW) studies were conducted in drift areas of two bridge sites in the hilly terrain of J&K for imaging and characterizing shallow sub-surface structure. The purpose of the present study is to estimate the shear wave velocity (VS) and subsurface structure in four drifts made in a hilly terrain for construction of two bridges. Rayleigh waves are having dispersive properties, travelling along or near the ground surface and are usually characterized by relatively low velocity, low frequency, and high amplitude. The study area comprises of Tertiary group of rocks which are underlain by Siwalik group. The main rock type in the study area is dolomite which has undergone various geological processes like weathering, jointing, fracturing and shearing. MASW data was collected inside four drifts in the mountainous terrain of J&K state which are located on either sides of Chenab river. The data was analyzed by relevant processing software using dispersion and inversion technique. Shear wave velocities were estimated up to 30 m depth. Average shear wave velocity (VS 30) up to top 30m was also computed. It is observed that, VS in the range 400–800 m/s upto 10–15 m corresponding to weathered rock, followed by compact dolomite rock up to the depth of about 30 m with VS in the range 1200–1600 m/s. Some low velocity zones are also identified from these sections which represent shear zones. 相似文献