共查询到20条相似文献，搜索用时 384 毫秒
1.
2.
基于Coons曲面的规则格网DEM表面模型 总被引：7，自引：0，他引：7
内插是数字高程模型的核心问题。目前的内插模型主要是由离散的格网数据构建的连续曲面,直接以点推面,可能存在较大的地形误差。本文建立的Coons曲面DEM表面模型,首先利用离散的格网数据构造与格网边界相对应的地形剖面曲线的拟合曲线,再基于拟合曲线构建DEM表面模型。实验表明：Coons曲面DEM表面模型是一种高精度的DEM表面模型,其地形模拟误差比直接基于格网数据建立的双线性内插、样条函数内插和移动曲面拟合法的误差都小,实际地形模拟误差与双线性模型相比减少15％-28％,且精度随着构建边界拟合曲线所用格网点的增多而逐渐提高。 相似文献
3.
激光雷达技术(LiDAR)已广泛应用于数字高程模型(DEM)的快速获取和三维城市模型的建立中,但仍有许多不足之处,需要做更深入的研究。本文介绍了一种新的建筑物提取方法,称之为Fc-S法。该方法首先利用等高线特征进行滤波,从LIDAR数据内插的数字表面模型(DSM)中提取出DEM,利用DSM与DEM的高差阈值和DSM边缘特征参数去掉地面点和汽车等矮小物体,获得主要包含植被和建筑物的地物点群,然后对地物点群进行分割,利用二次梯度和面积等参数去掉植被点,并采用迭代逼近的方法精化建筑物。文章通过实验对所提方法进行验证,并借助高分辨率的航空影像对建筑物提取结果进行评估,评估结果表明该方法能够在地形起伏的区域中较准确地提取出建筑物。 相似文献
4.
This paper reports an investigation into the generalization of a grid-based digital elevation model (DEM) for the purpose of terrain analysis. The focus is on the method of restructuring the grid-based surface elevation data to form a triangulated irregular network (TIN) that is optimized to keep the important terrain features and slope morphology with the minimum number of sample points. The critical points of the terrain surface are extracted from the DEM based on their significance, measured not only by their local relief, but also by their importance in identifying inherent geomorphological and drainage features in the DEM. A compound method is proposed by integrating the traditional point-additive and feature-point methods to construct a drainage-constrained TIN. The outcome is then compared with those derived from other selected methods including filtering, point-additive or feature-point algorithms. The results show that the compound approach is capable of taking advantage of both point-additive and feature-point algorithms to maximally keep the terrain features and to maintain RMSE at an acceptable level, while reducing the elevation data points by over 99%. The analytical result also shows that the proposed method outperforms the compared methods with better control in retaining drainage features at the same level of RMSE. 相似文献
5.
Any errors in digital elevation models (DEMs) will introduce errors directly in gravity anomalies and geoid models when used
in interpolating Bouguer gravity anomalies. Errors are also propagated into the geoid model by the topographic and downward
continuation (DWC) corrections in the application of Stokes’s formula. The effects of these errors are assessed by the evaluation
of the absolute accuracy of nine independent DEMs for the Iran region. It is shown that the improvement in using the high-resolution
Shuttle Radar Topography Mission (SRTM) data versus previously available DEMs in gridding of gravity anomalies, terrain corrections
and DWC effects for the geoid model are significant. Based on the Iranian GPS/levelling network data, we estimate the absolute
vertical accuracy of the SRTM in Iran to be 6.5 m, which is much better than the estimated global accuracy of the SRTM (say
16 m). Hence, this DEM has a comparable accuracy to a current photogrammetric high-resolution DEM of Iran under development.
We also found very large differences between the GLOBE and SRTM models on the range of −750 to 550 m. This difference causes
an error in the range of −160 to 140 mGal in interpolating surface gravity anomalies and −60 to 60 mGal in simple Bouguer
anomaly correction terms. In the view of geoid heights, we found large differences between the use of GLOBE and SRTM DEMs,
in the range of −1.1 to 1 m for the study area. The terrain correction of the geoid model at selected GPS/levelling points
only differs by 3 cm for these two DEMs. 相似文献
6.
具有高分辨率和连续表面的DEM数据是获取月球形貌特征并进行数字地形分析的主要数据源。本文选择嫦娥五号候选着陆区中的一个区域作为试验区,首先,基于LROC NAC立体影像、ISIS3和Stereo Pipeline软件生成高分辨率DOM影像及对应DEM数据,并将其与日本SELENE数据进行对比;然后,利用反距离权重、径向基函数和经验贝叶斯克里金3种插值方法对DEM数据的空洞区域进行修复,并对不同修复方法进行交叉验证分析。结果表明：生成的DOM和DEM分辨率约3.5 m,明显比7.4 m分辨率的日本SELENE数据清晰,并具有更强的地形表达能力;径向基函数插值法的空洞修复效果最好,交叉验证均方根误差为0.26 m。本文对准确获取月球形貌特征、探测器选址等具有一定作用,并能够为其他区域的高分辨率连续DEM数据生成提供参考。 相似文献
7.
Abstract<title/>When the source data for the digital elevation model (DEM) are not known and any additional information or features such as skeleton lines of terrain is not available, a triangular regular network (TRN) is constructed with simple subdivision using one or two diagonals uniformly. Such a model gives inaccurate directions for interpolation because of the inaccurate diagonals used in triangulation and thereby, results in inaccurate contours representing artificial terrain features. In this study, a new method is developed based on slope information computed at DEM points determining accurate diagonals in the subdivision process, which is beneficial not only through the skeleton lines of a terrain but also all over the DEM. Consequently, it is shown that the proposed method is able to build a high fidelity TRN from a DEM without any additional information or features. 相似文献
8.
A case study of using external DEM in InSAR DEM generation 总被引：2，自引：0，他引：2
ZHOUChunxia GELinlin EDongchen CHANGHsingchung 《地球空间信息科学学报》2005,8(1):14-18
Synthetic aperture radar interferometry (InSAR) has been used as an innovative technique for digital elevation model (DEM) and topographic map generation. In this paper, external DEMs are used for InSAR DEM generation to reduce the errors in data processing. The DEMs generated from repeat-pass InSAR are compared. For steep slopes and severe changes in topography, phase unwrapping quality can be improved by subtracting the phase calculated from an external DEM. It is affirmative that the absolute height accuracy of the InSAR DEM is improved by using external DEM. The data processing was undertaken without the use of ground control points and other manual operation. 相似文献
9.
10.
11.
月面地形信息对于嫦娥3号的安全降落是至关重要的。本文提出了一种基于压缩感知的超分辨率DEM重建方法,得到了虹湾(嫦娥3号的拟着陆位置)的超分辨率DEM。该方法先根据经过模糊处理并加入噪声的低分辨率DEM重建原始的高分辨率DEM,采用K-SVD算法完成高、低分辨率过完备字典Ah和Al的学习;再获得低分辨率DEM块的稀疏表示,并将表示系数用于高分辨率字典以生成对应的高分辨率DEM块;最后运用最小二乘算法得到满足重构约束的高分辨率DEM。实验验证了算法的有效性,表明其在视觉效果及RMSE指标上均优于插值方法。 相似文献
12.
基于机载激光雷达（LiDAR）点云生产高质量的数字高程模型（DEM）,需要地形特征线的约束。本文针对现有断裂线提取算法仅仅考虑了地表的局部变化,错提取率高的现状,从人工解译的角度出发,引入地形开度（topographic openness）作为一种定量描述地表整体变化的地形特征,提出了基于地形开度的断裂线自动提取算法。首先将原始地面点按高程采样成距离图像,然后通过地形开度算子获取地表的主体结构变化,最后结合形态学算子和边缘提取算子提取断裂线种子点并跟踪断裂线矢量。试验结果表明,该算法无需人工干预,能够快速提取较完整的断裂线。 相似文献
13.
针对如何提高机载InSAR DEM空洞填补精度和DEM对地形细节描述的难题,该文对分形模拟的中点位移插值函数做了改进。首先,提出了动态分形参数提取思路,根据选定的窗口动态提取局部分形参数,使提取的分形参数局部精度显著提高。其次,提出了分形曲面中心内插法,以正方形为图像基元,将两点信息扩展到8点信息来充分显示局部变化的细节信息;考虑到对采样点点数和位置的要求,结合距离加权平均法来弥补周围不够8点的特殊情况。最后,以国产机载X波段全极化InSAR影像提取的DEM为数据源进行了实验。实验结果表明,相比传统的中点分形内插法,该方法不仅能有效提高空洞填补精度,且能更好地描述地形的细节信息。 相似文献
14.
15.
针对当前丰富多样的DEM地形综合模型,分类阐述其综合原理、关键技术及优缺点,以黄土丘陵1：1万DEM为基础,对其地形综合效果进行对比分析。研究结果表明：现有的DEM地形综合模型各有优缺点;不同综合模型综合后的地形,高程数值随着综合尺度的增加,存在显著差异,而且不同综合模型对流域边界的综合处理也存在显著差异,没有形成客观有效的流域边界描述;当前困扰DEM地形综合的关键问题,是缺乏不同尺度下地形综合质量的客观评价标准,致使现有综合模型地形综合结果和DEM格网分辨率之间没有建立本应存在的内在联系,有待进一步深入研究。 相似文献
16.
Topographic corrections of synthetic aperture radar (SAR) images over hilly regions are vital for retrieval of correct backscatter values associated with natural targets. The coarse resolution external digital elevation models (DEM) available for topographic corrections of high resolution SAR images often result into degradation of spatial resolution or improper estimation of backscatter values in SAR images. Also, many a times the external DEMs do not spatially co-register well with the SAR data. The present study showcases the methodology and results of topographic correction of ALOS-PALSAR image using high resolution DEM generated from the same data. High resolution DEMs of Jaipur region, India were generated using multiple pair SAR images acquired from ALOS-PALSAR using interferometric (InSAR) techniques. The DEMs were validated using differential global positioning system measured elevation values as ground control points and were compared with photogrammetric DEM (advanced spaceborne thermal emission and reflection radiometer – ASTER) and SRTM (Shuttle Radar Topography Mission) DEM. It was observed that ALOS-PALSAR images with optimum baseline parameters produced high resolution DEM with better height accuracy. Finally, the validated DEM was used for topographic correction of ALOS-PALSAR images of the same region and were found to produce better result as compared with ASTER and SRTM-DEM. 相似文献
17.
18.
为在DEM简化过程中充分保留地形骨架信息,提出一种基于ANUDEM与山脊抬升的DEM简化方法。利用ANUDEM插值法获得顾及水文要素的DEM简化表面,并对简化DEM实施山脊抬升,从而得到顾及地形骨架的简化表面。实验表明,在简化DEM中实施山脊抬升能够更大程度地增强简化表面山体结构的保留程度,且随着地形简化程度的降低,山脊抬升法的作用也逐渐增大。 相似文献
19.
20.
几种建立DEM模型插值方法精度的交叉验证 总被引：5，自引：0，他引：5
建立DEM模型时需要对离散的高程点进行空间插值,实现这一目的的插值方法有很多种。文章主要选择了6种常用的插值方法,分别在平原、丘陵和高山几种不同复杂程度的环境下对其插值的精度使用交叉验证方法进行评估。结果表明,同样的插值方法对不同复杂程度的地形效果是不一致的,多种插值方法中以克里金插值方法的插值适用性最强,精度最高。 相似文献