首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 367 毫秒
1.
JACO H. BAAS 《Sedimentology》1994,41(2):185-209
An empirical model is constructed for the development and equilibrium dimensions of small scale, unidirectional bedforms in sand with a median grain size of 0·095 mm, based on a series of steady flow experiments in a flume. Current ripples always attain a linguoid plan morphology with constant average height (13·1 mm) and wavelength (115·7 mm), provided that sufficient time is allowed for their formation. The development pattern of these ripples on a flat bed is independent of flow velocity, and involves four stages: (1) incipient ripples; (2) straight and sinuous ripples; (3) non-equilibrium linguoid ripples, and (4) equilibrium linguoid ripples. Straight and sinuous ripples are non-equilibrium bedforms at all flow velocities. The time needed to reach equilibrium dimensions is related to the inverse power of flow velocity and ranges from several minutes to more than hundreds of hours. At flow velocities where washed ripples are stable, the equilibrium wavelength is similar to that of equilibrium linguoid ripples, but the equilibrium height rapidly decreases from 13·1 mm to zero towards upper stage plane bed conditions. The results of the flume experiments correspond reasonably well with those of previous studies, provided that various complicating factors, such as different experimental methods, different sediment characteristics, shallow flow depths and non-equilibrium runs, are accounted for.  相似文献   

2.
Flume experiments show that current ripples on very fine sand surfaces always develop towards a linguoid shape with constant height and wavelength provided that sufficient time is allowed for their formation. Straight and sinuous current ripples only reflect intermediate stages in ripple development and may be regarded as non-equilibrium bedforms. The time period which current ripples require to reach linguoid equilibrium morphology is related to an inverse power of flow velocity. In the transitional stage from current ripples to upper stage plane bed (i.e. washed-out ripple stage) only the equilibrium wavelength remains constant, whereas equilibrium height rapidly decreases to zero. Our observations imply that bed-roughness parameters in sediment transport calculations can be simplified when equilibrium conditions are attained, and that inferences about flow energy from the dimensions of current ripples in very fine sand need to be regarded with caution.  相似文献   

3.
Dimensions and plan morphology of current ripples are generally considered to vary with flow velocity and grain size. Recently, however, it has been shown that for sand of D50=0.095 and 0.238 mm the equilibrium dimensions are identical at all velocities within the stability field of ripples and that the plan form of equilibrium ripples is linguoid. On this basis, an empirical unsteady flow model has been developed and tested with flume experiments in order to predict ripple development in natural depositional environments. The model includes the development of washed-out ripples and upper stage plane bed. The unsteady flow model explains the development and preservation of small scale bedforms in various tidal environments more accurately than previous models. Such bedforms can serve, therefore, as indicators of prevailing hydrodynamic conditions.  相似文献   

4.
Interpreting the physical dynamics of ancient environments requires an understanding of how current‐generated sedimentary structures, such as ripples and dunes, are created. Traditional interpretations of these structures are based on experimental flume studies of unconsolidated quartz sand, in which stepwise increases in flow velocity yield a suite of sedimentary structures analogous to those found in the rock record. Yet cyanobacteria, which were excluded from these studies, are pervasive in wet sandy environments and secrete sufficient extracellular polysaccharides to inhibit grain movement and markedly change the conditions under which sedimentary structures form. Here, the results of flume experiments using cyanobacteria‐inoculated quartz sand are reported which demonstrate that microbes strongly influence the behaviour of unconsolidated sand. In medium sand, thin (ca 0·1 to 0·5 mm thick) microbial communities growing at the sediment–water interface can nearly double the flow velocity required to produce the traditional sequence of ripple→dune→plane‐bed lamination bedforms. In some cases, these thin film‐like microbial communities can inhibit the growth of ripples or dunes entirely, and instead bed shear stresses result in flip‐over and rip‐up structures. Thicker (ca≥1 mm thick) microbial mats mediate terracing of erosional edges; they also, foster transport of multi‐grain aggregates and yield a bedform progression consisting of flip‐overs→roll‐ups→rip‐ups of bound sand.  相似文献   

5.
  相似文献   

6.
Besides particle size, density and shape, the erodibility of a sediment bed depends also upon the exposure to prethreshold velocities in the overlying flow. Such flow effectively rearranges the grains (at and below the bed surface), causing them to become more resistant to subsequent erosion. The effects of the ‘stress history’, leading up to the critical condition for sediment movement, are investigated for unidirectional flows generated in a recirculating laboratory flume. The sediment beds investigated consisted of cohesionless quartz sand grains, with mean grain diameters of 0·194 mm (fine sand), 0·387 mm (medium sand) and 0·774 mm (coarse sand), with narrow particle-size distributions. The critical (threshold) shear velocity (target value) for the three beds was established, within 2·5 min of increasing the flow from zero velocity. The subsequent experiments were performed under prethreshold velocities at 70% (for 5, 10, 20, 40 and 80 min exposure duration), 80% (for 5, 10, 20, 40 and 80 min exposure duration), 90 and 95% (for 5, 10, 20, 40, 80 and 120 min exposure duration) of the target value. Following exposure to these different prethreshold conditions, the flow was increased then to reach actual critical conditions, within a period of 2·5 min. The critical condition for the initiation of sediment movement was established using visual observation (supplemented by video recordings), according to the Yalin criterion. The results show that if the exposure duration to prethreshold velocities remains constant, then the critical shear velocity increases with increasing prethreshold velocity. Likewise, if the prethreshold velocity remains constant, then the critical shear velocity increases with increasing exposure duration. In some circumstances, the critical shear velocity was found to increase by as much as 27%. An empirical formula is proposed to account for the exposure correction to be applied to the critical shear velocities of sand-sized sediment beds; this is prior to their inclusion into bedload transport formulae, for an improved prediction of the magnitude and nature of transport.  相似文献   

7.
Response of sand ripples to change in oscillatory flow   总被引：3，自引：1，他引：3  
Ripples take time to evolve to a new equilibrium state in response to a change in wave-generated oscillatory flow. The paper presents results from flow tunnel experiments designed to examine oscillatory flow transient ripple processes under controlled, full-scale laboratory conditions. The experiments include study of the growth of ripples from flat bed and the evolution of existing ripples to new equilibrium ripples in response to a step change in the flow. In general, ripples evolve through a combination of two main processes: (i) from a flat bed or from a bed consisting of ripples that are smaller than the equilibrium ripples through a combination of 'slide' and 'merge'; (ii) from a bed consisting of ripples that are larger than the equilibrium ripples through a combination of 'split' and 'merge'. The experimental results show that equilibrium ripple geometry is independent of initial bed morphology while the time to reach equilibrium is largely independent of the initial bed and the equilibrium ripple size. The time to reach equilibrium depends strongly on the mobility number, and a new empirical equation relating mobility number and the number of flow cycles to equilibrium is proposed. This equation is combined with a simple exponential function for ripple height growth or decay to produce a new empirical model for ripple height evolution, which gives a reasonably good overall agreement with the measurements. The model is based on experiments involving one sediment size only and further work is needed to develop the model for other sand sizes.  相似文献   

8.
Experimental studies of subcritical, unidirectional flow over upper stage plane beds of medium grained sand reveal the ubiquitous presence of low amplitude bedwaves. Flow depth was 0·11 m, mean flow velocities were 0·86–1·0 m s?1, shear velocities were 0·058–0·71 m s?1 and dimensionless shear stresses were 0·56–0·87. Bedwaves are asymmetrical in profile and range from 0·75 to 11 mm in height (mainly 2–6 mm), from 0·7 to 1·3 m in wavelength and have mean celerities of 10 mm s?1. Flow records suggest that the bedwaves are associated with accelerating flow over the bedwave crests and flow which decelerates and diverges laterally over the troughs. High resolution bed profiling during aggradation of the bed combined with subsequent box coring illustrates that these bedwaves are responsible for the planar laminae characteristic of upper stage plane beds. Lamina preservation is dependent upon the mean aggradation rate and the sequence of bedwaves of different height crossing any point; individual laminae are more readily preserved at higher aggradation rates where the possibility of reworking by later bedwaves is reduced. Laminae are recognized by small changes in grain size and commonly a fining upwards at the top of laminae which is generated by fine grained material infiltrating a lower lamina in the leeside of a bedwave.  相似文献   

9.
《Sedimentology》2018,65(6):1859-1874
Ripples are prevalent in aeolian landscapes. Many researchers have focused on the shape and formation of sand ripples, but few have studied the differences in the particle size of sand on crests and in troughs along bed, especially the variations caused by changes in friction velocity and the wind‐blowing duration. A particle size of 158 μm (d ) was used to create aeolian ripples in a wind tunnel under four friction velocities (u *) with different wind duration times (t ). Samples were collected from the surfaces of ripple crests and troughs, respectively, at seven sites, and particle sizes were measured using a Malvern Mastersizer 2000. The main results were: (i) The particle size distributions of sand in troughs are unimodal with slight variations of particle size parameters, including mean particle size, standard deviation, skewness and kurtosis, etc., under different conditions, while these particle size parameters of sand on crests change with friction velocity and deflation time. Moreover, some of the particle distribution curves for the sand on crests do not follow typical unimodal curves. (ii) With increasing friction velocity or deflation duration, the sand on the crests shows a coarsening process relative to those on the bed surface. The particle size of sand on crests at a 1 m bed increases linearly with friction velocity (d  =  344·27 + 34·54 u *) at a given wind‐blowing duration. The particle sizes of sand on crests at 1 m, 2 m and 4 m beds increase with a power‐law relationship (d  = a + t b, where a and b are fitting parameters) with deflation time at a given friction velocity. (iii) The probability cumulative curves of sand showed a three‐section pattern in troughs and on most of the crests but a four‐section pattern at crest locations due to increased influence by friction velocity and deflation time. The proportions of the sediment moved by suspension, saltation and creep in the three‐section pattern were within the ranges of 0·2% to 2·0%, 97·0% to 98·9%, and 0·8% to 3·0%, respectively. For the four‐section pattern, suspension accounted for 0·3% and 3·0%, and the proportion of creep increased with friction velocity and deflation time, while saltation decreased accordingly. Although these results require additional validation, they help to advance current understanding of the grain‐size characteristics of aeolian ripples.  相似文献   

10.
Entrainment of planktonic foraminifera: effect of bulk density   总被引：1，自引：0，他引：1  
Depositional hydrodynamics have been studied using settling rate distributions of Norwegian deep sea sediments (between Jan Mayen Island and the Vøring Plateau), together with Shields’ critical shear stress velocities. Planktonic foraminifera are the dominant sand sized component of these sediments. The bulk density of the foraminifera was calculated from their settling velocity, sieve size and shape. Density decreases from 2·39 g cm?3 at 0·05 mm diameter to 1·37 g cm?3 at 0·35 mm diameter. These density and size data were used to construct a threshold sediment movement curve. From the similarity in their Shield's critical shear-stress velocities and the observed correlation of foraminifera size with decreasing percentage of fine fraction, it is concluded that the two components, the sand size foraminifera and the quartz and carbonate silt, are transport-equivalent.  相似文献   

11.
The dynamics of large isolated sand dunes moving across a gravel lag layer were studied in a supply‐limited reach of the River Rhine, Germany. Bed sediments, dune geometry, bedform migration rates and the internal structure of dunes are considered in this paper. Hydrodynamic and sediment transport data are considered in a companion paper. The pebbles and cobbles (D50 of 10 mm) of the flat lag layer are rarely entrained. Dunes consist of well‐sorted medium to coarse sand (D50 of 0·9 mm). Small pebbles move over the dunes by ‘overpassing’, but there is a degree of size and shape selectivity. Populations of ripples in sand (D50 < 0·6 mm), and small and large dunes are separated by distinct breaks in the bedform length data in the regions of 0·7–1 m and 5–10 m. Ripples and small dunes may have sinuous crestlines but primarily exhibit two‐dimensional planforms. In contrast, large dunes are primarily three‐dimensional barchanoid forms. Ripples on the backs of small dunes rarely develop to maximum steepness. Small dunes may achieve an equilibrium geometry, either on the gravel bed or as secondary dunes within the boundary layer on the stoss side of large dunes. Secondary dunes frequently develop a humpback profile as they migrate across the upper stoss slope of large dunes, diminishing in height but increasing in length as they traverse the crestal region. However, secondary dunes more than 5 m in length are rare. The dearth of equilibrium ripples and long secondary dunes is probably related to the limited excursion length available for bedform development on the parent bedforms. Large dunes with lengths between 20 m and 100 m do not approach an equilibrium geometry. A depth limitation rather than a sediment supply limitation is the primary control on dune height; dunes rarely exceed 1 m high in water depths of ≈4 m. Dune celerity increases as a function of the mean flow velocity squared, but this general relationship obscures more subtle morphodynamics. During rising river stage, dunes tend to grow in height owing to crestal accumulation, which slows downstream progression and steepens the dune form. During steady or falling stage, an extended crestal platform develops in association with a rapid downstream migration of the lee side and a reduction in dune height. These diminishing dunes actually increase in unit volume by a process of increased leeside accumulation fed by secondary dunes moving past a stalled stoss toe. A six‐stage model of dune growth and diminution is proposed to explain variations in observed morphology. The model demonstrates how the development of an internal boundary layer and the interaction of the water surface with the crests of these bedload‐dominated dunes can result in dunes characterized by gentle lee sides with weak flow separation. This finding is significant, as other studies of dunes in large rivers have attributed this morphological response to a predominance of suspended load transport.  相似文献   

12.
Granule ripples are found mainly in four regions of the Kumtagh Desert in China; they are characterized by an asymmetrical shape, with gentle lower slopes on both sides and abrupt crests. The ripples tend to be oriented perpendicular to the prevailing winds, except when they form near obstacles such as yardangs. The wavelengths (λ) range between 0·31 m and 26 m and heights (h) range from 0·015 m to 1 m. The relationship between wavelength and height can be described by a simple linear function, and the mean ripple index (λ/h) is about 20·4 for the study sites. The sediments are poorly sorted, with negative to very negative skewness at lee and stoss slopes and between‐ripple troughs, which confirms the ‘poured in’ and ‘shadow’ appearance described by previous researchers. The bimodal or trimodal distributions of grains (with modes of ?1·16φ, ?0·5φ and 3·16φ) and the enrichment of coarse particles at the ripple surface (with coarse granule contents ranging between 5·2% and 62·1%) indicate that the underlying layer is the original sediment source and that the granule ripples resist erosional processes. Although the impact of saltating particles and, consequently, the creep and reptation of coarse grains are responsible for granule ripple initiation at a micro‐scale, however, the characteristics of local sediments, wind regimes and topographical obstacles, as well as the feedbacks among bedform and airflow, more strongly affect the development and alignment of granule ripples at a macro‐scale.  相似文献   

13.
This experimental investigation examined the controls on the geometry of cross‐sets formed by subaqueous dunes. A range of steady, unidirectional flow conditions spanning the field of dune existence was investigated, and aggradation rate ranged from 0 mm s?1 to 0·014 mm s?1. Data from an ultrasonic depth profiler consist of high‐resolution temporal and spatial series of bed profiles from which dune height and length, migration rate and the depth of trough scour were measured. Cross‐set thickness and length were measured from sediment peels. The size and shape of dunes from an equilibrium assemblage change continuously. Individual dunes commonly increase in height by trough scouring and, occasionally, by being caught‐up by the upstream dune. Both types of behaviour occur suddenly and irregularly in time and, hence, do not appear to depend on dunes further upstream. However, dune climbing or flattening is a typical response of dunes that disappear under the influence of the upstream dune. All types of behaviour occur at any flow velocity or aggradation rate. Successive dune‐trough trajectories, defined by dunes showing various behaviours, affect the geometry of the preserved cross‐sets. Mean cross‐set thickness/mean dune height averages 0·33 (±0·7), and mean cross‐set length/mean dune length averages 0·49 (±0·08), and both show no systematic variation with aggradation rate or flow velocity. Mean cross‐set thickness/mean cross‐set length tends to decrease with increasing flow velocity and Froude number, therefore allowing a qualitative estimation of flow conditions. Quantitative analysis of the temporal changes in the geometry and migration rate of individual dunes allows the development of a two‐dimensional stochastic model of dune migration and formation of cross‐sets. Computer realizations produced stacks of cross‐sets of comparable shape and thickness to laboratory flume observations, indicating a good empirical understanding of the variability of dune‐trough trajectories. However, interactions among dunes and aggradation rates of the order of 10?2 mm s?1 should be considered in future improved models.  相似文献   

14.
Aeolian granule ripple deposits, Namibia   总被引：1，自引：0，他引：1  
Granule ripples are a common feature of most dunefields, yet they have seldom been recognized in ancient deposits. Although granule ripples are common in erosional settings, such as windward slopes of dunes, or scour surfaces in interdunes, they nevertheless migrate laterally and leave distinctive deposits that can be recognized in ancient rocks. These deposits have characteristics of ‘type B’sand sheet deposits, including: ‘poured-in’texture; curving ripple trough; tangential, coarse-grained foresets; irregular silty layers; well-sorted coarse and fine layers (either horizontal or within foresets); and fine layers in ripple troughs. Wind tunnel experiments suggest that under low-velocity wind conditions, granule ripples grow to a significant degree as parasites dependent on saltation of fine sand grains whose impact moves the larger grains of the granule ripple. Although the depositional surface of granule ripples is commonly coated with a layer of coarse grains, this is in most places only a few grains thick. Underlying deposits commonly have a poorly sorted, or ‘poured-in’texture. This texture results from an admixture of fine grains that fall among the spaces between the larger grains during deposition.  相似文献   

15.
Creep and saltation are the primary modes of surface transport involved in the fluid‐like movement of aeolian sands. Although numerous studies have focused on saltation, few studies have focused on creep, primarily because of the experimental difficulty and the limited amount of theoretical information available on this process. Grain size and its distribution characteristics are key controls on the modes of sand movement and their transport masses. Based on a series of wind tunnel experiments, this paper presents new data regarding the saltation flux, obtained using a flat sampler, and on the creeping mass, obtained using a specifically designed bed trap, associated with four friction velocities (0·41, 0·47, 0·55 and 0·61 m sec?1). These data yielded information regarding creeping and saltating sand grains and their particle size characteristics at various heights, which led to the following conclusions: (i) the creeping masses increased as a power function (q = ?1·02 + 14·19u*3) of friction wind velocities, with a correlation (R2) of 0·95; (ii) the flux of aeolian sand flow decreases exponentially with increasing height (q = a exp(–z/b)) and increases as a power function (q = ?26·30 + 428·40 u*3) of the friction wind velocity; (iii) the particle size of creeping sand grains is ca 1·15 times of the mean diameter of salting sand grains at a height of 0 to 2 cm, which is 1·14 times of the mean diameter of sand grains in a bed; and (iv) the mean diameter of saltating sand grains decreases rapidly with increasing height whereas, while at a given height, the mean diameter of saltating sand grains is positively correlated with the friction wind velocity. Although these results require additional experimental validation, they provide new information for modelling of aeolian sand transport processes.  相似文献   

16.
ABSTRACT There are very few field measurements of nearshore bedforms and grain‐size distribution on low‐energy microtidal beaches that experience low‐amplitude, long‐period waves. Field observations are needed to determine grain‐size distribution over nearshore bedforms, which may be important for understanding the mechanisms responsible for ripple development and migration. Additional nearshore field observations of ripple geometry are needed to test predictive models of ripple geometry. Ripple height, length and sediment composition were measured in the nearshore of several low‐energy beaches with concurrent measurements of incident waves. The distribution of sediment sizes over individual ripples was investigated, and the performance of several models of ripple geometry prediction was tested both spatially and temporally. Sediment samples were collected from the crest and trough of 164 ripples. The sand‐sized sediment was separated from the small amount (generally <3%) of coarser material (>2 mm) that was present. Within the sand‐sized fraction, the ripple crests were found to be significantly coarser, better sorted and more positively skewed than the troughs. Overall, the troughs were finer than the crests but contained a greater proportion of the small fraction of sediment larger than 2 mm. The field model of Nielsen (1981 ) and the model of Wiberg & Harris (1994 ) were found to be the most accurate models for predicting the wavelength of parallel ripples in the nearshore of the low‐energy microtidal environments surveyed. The Wiberg & Harris (1994 ) model was also the most accurate model for predicting ripple height. Temporal changes in ripple wavelength appear to be dependent on the morphological history of the bed.  相似文献   

17.
A series of wave‐flume experiments was conducted to closely look at characteristics of geometry and migration of wave‐generated ripples, with particular reference to the effect of velocity ‘hiatuses’ during which the near‐bed flow velocity becomes much smaller than the threshold of sediment movement. Three types of wave patterns were generated: two types for simulating waves with intervening velocity hiatuses; and regular waves for comparison purposes. In the former two types, two different wavelengths of water waves were generated alternately in the course of a wave test: the wave with a longer wavelength was set large enough to mobilize the bottom sediment, whereas the wave with a shorter wavelength was set too small to mobilize the sediment. The former two types were designed to be different in sequence of convexity and concavity of wave patterns. The sequence with the convex–concave longer wave and successive convex–concave shorter wave was described as a ‘zero‐up‐crossing’ wave pattern, and the inverse sequence was described as a ‘zero‐down‐crossing’ wave pattern. The ripples developed under oscillatory flow with intervening hiatuses manifested the following characteristics in geometry and migration. (i) The morphological characteristics of ripples, namely wavelength, height and the ripple steepness, are unaffected by the intervening hiatuses of velocity. (ii) The directions of ripple migration under the zero‐up‐crossing and zero‐down‐crossing wave patterns corresponded well with the directions of the flow immediately before onset of the hiatuses. (iii) The observation of sand particle movement on the ripple surface indicated that, under the zero‐up‐crossing waves, the velocity hiatus prevents the entrained sediment cloud from being thrown onshore, and thus the sediment grains thrown onshore are fewer than those thrown offshore. As a result of the sediment movement over one wave‐cycle, the net sediment transport is directed offshore under the zero‐up‐crossing wave pattern. (iv) The velocity of ripple migration was highly correlated with acceleration skewness. Under most of the zero‐up‐crossing (zero‐down‐crossing) wave patterns, flow acceleration skewed negative (positive) and ripples migrated offshore (onshore).  相似文献   

18.
Climbing‐ripple cross‐lamination is most commonly deposited by turbidity currents when suspended load fallout and bedload transport occur contemporaneously. The angle of ripple climb reflects the ratio of suspended load fallout and bedload sedimentation rates, allowing for the calculation of the flow properties and durations of turbidity currents. Three areas exhibiting thick (>50 m) sections of deep‐water climbing‐ripple cross‐lamination deposits are the focus of this study: (i) the Miocene upper Mount Messenger Formation in the Taranaki Basin, New Zealand; (ii) the Permian Skoorsteenberg Formation in the Tanqua depocentre of the Karoo Basin, South Africa; and (iii) the lower Pleistocene Magnolia Field in the Titan Basin, Gulf of Mexico. Facies distributions and local contextual information indicate that climbing‐ripple cross‐lamination in each area was deposited in an ‘off‐axis’ setting where flows were expanding due to loss of confinement or a decrease in slope gradient. The resultant reduction in flow thickness, Reynolds number, shear stress and capacity promoted suspension fallout and thus climbing‐ripple cross‐lamination formation. Climbing‐ripple cross‐lamination in the New Zealand study area was deposited both outside of and within channels at an inferred break in slope, where flows were decelerating and expanding. In the South Africa study area, climbing‐ripple cross‐lamination was deposited due to a loss of flow confinement. In the Magnolia study area, an abrupt decrease in gradient near a basin sill caused flow deceleration and climbing‐ripple cross‐lamination deposition in off‐axis settings. Sedimentation rate and accumulation time were calculated for 44 climbing‐ripple cross‐lamination sedimentation units from the three areas using TDURE, a mathematical model developed by Baas et al. (2000) . For Tc divisions and Tbc beds averaging 26 cm and 37 cm thick, respectively, average climbing‐ripple cross‐lamination and whole bed sedimentation rates were 0·15 mm sec?1 and 0·26 mm sec?1 and average accumulation times were 27 min and 35 min, respectively. In some instances, distinct stratigraphic trends of sedimentation rate give insight into the evolution of the depositional environment. Climbing‐ripple cross‐lamination in the three study areas is developed in very fine‐grained to fine‐grained sand, suggesting a grain size dependence on turbidite climbing‐ripple cross‐lamination formation. Indeed, the calculated sedimentation rates correlate well with the rate of sedimentation due to hindered settling of very fine‐grained and fine‐grained sand–water suspensions at concentrations of up to 20% and 2·5%, respectively. For coarser grains, hindered settling rates at all concentrations are much too high to form climbing‐ripple cross‐lamination, resulting in the formation of massive/structureless S3 or Ta divisions.  相似文献   

19.
Field observations are made of the formation of backwash ripples on the beach face, formed by undular hydraulic jumps generated by backwash down the beach face colliding with wave bores. Measured ripple wavelengths range from set averages of 48 to 70 cm. Within a particular set of ripples the spacing tends to decrease in the offshore direction. These observations are compared with laboratory experiments where undular jumps are generated in a flume, and with a computer simulation model which calculates both the flow within an undular hydraulic jump and the resulting sediment transport which gives rise to the backwash ripples. The computer model involves a numerical solution of the Bousssinesq equations which govern the fluid flow, and sediment transport equations which relate the sand transport rate to the local mean flow velocity. The model permits a study of the detailed time-history of the undular jump development and the formation of the backwash ripples and shows good agreement with the field observations of backwash ripples, predicting an offshore decrease in their spacings. The laboratory experiments showed a similar result so long as the Froude number of the supercritical flow before the jump occurs is small (c. 1–4). Small differences between the computer model and experiments arose principally from the neglect of internal friction and surface tension in the model.  相似文献   

20.
Analysis of an 18-day time-lapse film record of shoreface ripple development, with concurrent measurements of near-bottom flow and surface waves, provides new insight on equilibrium bedform conditions, adjustment of ripple planform to variable hydrodynamics, and ripple migration behaviour. The study was conducted in approximately 10 m water depth, 1 km off Martinique Beach on the Atlantic coast of Nova Scotia (Canada), under low-energy summer wave conditions. Significant wave-height and peak period during the study averaged 0–7 m and 8 s, respectively, with extremes up to 1–7 m and 11 s during passage of three weak weather disturbances. Six mutually exclusive ripple types have been defined: (1) short-wavelength regular ripples; (2) variable bifurcated ripples; (3) variable terminated ripples; (4) short-crested ripples; (5) long-wavelength regular ripples; and (6) chaotic ripples. Ripple wavelength ranged from 0–07 m to 0–24 m and displayed a strong Reynolds number dependence. Together with other published field data, the results suggest a lower limit of γ=0–06 m for the wavelength of wave ripples in ocean shoreface environments. Ripple orientation ranged through 38° and responded rapidly to changes in wave approach direction, but did not conform to the orientation of the adjacent shoreline. Ripples were observed to migrate both on- and off-shore (with and against the wave advance direction) at rates up to ±0–1 m h-1, associated with net flows other than wave-induced onshore asymmetry and mass transport. Migration (mainly of ripple types 1 and 2) occurred during the peak of storm events, but showed no obvious correlation with measured near-bottom flow magnitude or direction. Ripple behaviour demonstrates equilibrium with prevailing dynamic conditions when straight-crested rippie types 1 and 5 are present. Disequilibrium in orientation or dimensions is expressed by increasing sinuosity, bifurcation and crest termination in types 2,3,4 and 6.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号