首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 562 毫秒
1.
The Jabali Zn–Pb–Ag deposit is located about 110 km east of Sana'a, the capital of Yemen, along the western border of the Marib-Al-Jawf/Sab'atayn basin. The economic mineralization at Jabali is a nonsulfide deposit, consisting of 8.7 million tons at an average grade of 9.2% zinc, derived from the oxidation of primary sulfides. The rock hosting both primary and secondary ores is a strongly dolomitized carbonate platform limestone of the Jurassic Shuqra Formation (Amran Group). The primary sulfides consist of sphalerite, galena and pyrite/marcasite. Smithsonite is the most abundant economic mineral in the secondary deposit, and is associated with minor hydrozincite, hemimorphite, acanthite and greenockite. Smithsonite occurs as two main generations: smithsonite 1, which replaces both host dolomite and sphalerite, and smithsonite 2, occurring as concretions and vein fillings in the host rock. At the boundary between smithsonite 1 and host dolomite, the latter is widely replaced by broad, irregular bands of Zn-bearing dolomite, where Zn has substituted for Mg. The secondary mineralization evolved through different stages: 1) alteration of original sulfides (sphalerite, pyrite and galena), and release of metals in acid solutions; 2) alteration of dolomite host rock and formation of Zn-bearing dolomite; 3) partial dissolution of dolomite by metal-carrying acid fluids and replacement of dolomite and Zn-bearing dolomite by a first smithsonite phase (smithsonite 1). To this stage also belong the direct replacement of sphalerite and galena by secondary minerals (smithsonite and cerussite); 4) precipitation of a later smithsonite phase (smithsonite 2) in veins and cavities, together with Ag- and Cd-sulfides.The δ18O composition of Jabali smithsonite is generally lower than in other known supergene smithsonites, whereas the carbon isotope composition is in the same range of the negative δ13C values recorded in most supergene nonsulfide ores. Considering that the groundwaters and paleo-groundwaters in this area of Yemen have negative δ18O values, it can be assumed that the Jabali smithsonite precipitated in different stages from a combination of fluids, possibly consisting of local groundwaters variably mixed with low-temperature hydrothermal waters. The carbon isotope composition is interpreted as a result of mixing between carbon from host rock carbonates and soil/atmospheric CO2.The most favorable setting for the development of the Jabali secondary deposit could be placed in the early Miocene (~ 17 Ma), when supergene weathering was favored by major uplift and exhumation resulting from the main phase of Red Sea extension. Low-temperature hydrothermal fluids may have also circulated at the same time, through the magmatically-induced geothermal activity in the area.  相似文献   

2.
The Transfiguration Cu–Pb–Zn–Ag deposit, enclosed within reduced grey sandstone, is associated with continental red beds of the Lower Silurian Robitaille Formation in the Quebec Appalachians, Canada. The Robitaille Formation rests unconformably on foliated Cambro-Ordovician rocks. The unconformity is locally cut by barite veins. The basal unit of the Robitaille Formation comprises green wacke and pebble conglomerate, which locally contain calcite nodules. The latter have microstructures characteristic of alpha-type calcretes, such as “floating” fabrics, calcite-filled fractures (crystallaria) and circumgranular cracks. Massive, grey sandstone overlies the basal green wacke and pebble conglomerate unit, which is overlain, in turn, by red, fine-grained sandstone. Mineralisation occurred underneath the red sandstone unit, chiefly in the grey sandstone unit, as disseminated and veinlet sulphides. Chalcopyrite, the most abundant Cu sulphide, replaced early pyrite. Calcrete, disseminated carbonate and vein carbonate have stable isotope ratios varying from −7.5‰ to −1.1‰ δ13C and from 14.7‰ to 21.3‰ δ18O. The negative δ13C values indicate the oxidation of organic matter in a continental environment. Sulphur isotope ratios for pyrite, chalcopyrite and galena vary from −19‰ to 25‰ δ34S, as measured on mineral concentrates by a conventional SO2 technique. Laser-assisted microanalyses (by fluorination) of S isotopes in pyrite show an analogous range in δ34S values, from −21‰ to 25‰. Negative and positive δ34S values are compatible with bacterial sulphate reduction (BSR) in systems open and closed with respect to sulphate. We interpret similarly high δ34S values for sulphide concentrates (25.1‰) and for vein barite (26.2‰) to result from rapid and complete thermochemical reduction of pore-water sulphate. Two early to late diagenetic stages of mineralisation best explain the origin of the Transfiguration deposit. The first stage was characterised by the ponding of groundwater over the Taconian unconformity, recorded by calcrete and early pyrite formation via BSR in grey sandstone. Early pyrite contains up to 2 wt.% Pb, which is consistent with Pb fixation by sulphate-reducing bacteria. The second stage (II) is defined by the replacement of early pyrite by chalcopyrite, as well as by sulphide precipitation via either BSR or thermochemical sulphate reduction (TSR) in grey sandstone. This event resulted from the synsedimentary fault-controlled percolation and mixing of (1) an oxidising, sulphate-bearing cupriferous fluid migrating per descensum from the red-bed sequence and (2) a hydrocarbon-bearing fluid migrating per ascensum from the Cambro-Ordovician basement. Mixing between the two fluids led to sulphate reduction, causing Cu sulphide precipitation. The positive correlation between Cu and Fe3+/Fe2+ bulk rock values suggests that Fe acted as a redox agent during sulphate reduction. Stage II diagenetic fluid migration is tentatively attributed to the Late Silurian Salinic extensional event.  相似文献   

3.
  相似文献   

4.
The central zone of the Miocene Štiavnica stratovolcano hosts several occurrences of Cu–Au skarn–porphyry mineralisation, related to granodiorite/quartz–diorite porphyry dyke clusters and stocks. Vysoká–Zlatno is the largest deposit (13.4 Mt at 0.52% Cu), with mineralised Mg–Ca exo- and endoskarns, developed at the prevolcanic basement level. The alteration pattern includes an internal K- and Na–Ca silicate zone, surrounded by phyllic and argillic zones, laterally grading into a propylitic zone. Fluid inclusions in quartz veinlets in the internal zone contain mostly saline brines with 31–70 wt.% NaCl eq. and temperatures of liquid–vapour homogenization (Th) of 186–575°C, indicating fluid heterogenisation. Garnet contains inclusions of variable salinity with 1–31 wt.% NaCl eq. and Th of 320–360°C. Quartz–chalcopyrite veinlets host mostly low-salinity fluid inclusions with 0–3 wt.% NaCl eq. and Th of 323–364°C. Data from sphalerite from the margin of the system indicate mixing with dilute and cooler fluids. The isotopic composition of fluids in equilibrium with K-alteration and most skarn minerals (both prograde and retrograde) indicates predominantly a magmatic origin (δ18Ofluid 2.5–12.3‰) with a minor meteoric component. Corresponding low δDfluid values are probably related to isotopic fractionation during exsolution of the fluid from crystallising magma in an open system. The data suggest the general pattern of a distant source of magmatic fluids that ascended above a zone of hydraulic fracturing below the temperature of ductile–brittle transition. The magma chamber at ∼5–6 km depth exsolved single-phase fluids, whose properties were controlled by changing PT conditions along their fluid paths. During early stages, ascending fluids display liquid–vapour immiscibility, followed by physical separation of both phases. Low-salinity liquid associated with ore veinlets probably represents a single-phase magmatic fluid/magmatic vapour which contracted into liquid upon its ascent.  相似文献   

5.
Isotope-geochemical study of the Ermakovskoe fluorine–beryllium deposit was carried out to estimate the ore sources and role of host carbonate rocks in its formation. We analyzed oxygen and carbon isotope compositions in marbles, skarn carbonates, ore and post-ore parageneses; oxygen isotope compositions in oxides, silicates, apatite; and sulfur isotope composition in sulfides and sulfates. Sources of fluids participating in the rock and ore formation were determined using hydrogen and oxygen isotope compositions in hydroxyl-bearing minerals: phlogopite from marbles, vesuvian from skarns, eudidymite and bertrandite from ore parageneses, and bavenite of the post-ore stage. Isotopic studies suggest crustal source of sulfur, oxygen, and carbon dioxide, while oxygen and hydrogen isotope compositions in the hydroxyl-bearing minerals points to the contribution of meteoric waters in the formation of the fluorine-beryllium ores.  相似文献   

6.
Here we report the occurrence of some uncommon mineral assemblages including pääkönenite, aurostibite, native arsenic, native antimony, and native bismuth found in the Baogutu gold deposit in the western Junggar, Xinjiang, NW China. The mineralization could be generally subdivided into two types: the gold-bearing quartz-vein type mineralization and disseminated mineralization in the wall rocks. The sulfide minerals in gold lodes commonly include pyrite, arsenopyrite, marcasite, and stibnite. However, the L7 lode in No. 4 orebody and the L1 lode in No. 11 orebody of the Baogutu gold deposit are quite different in terms of their mineral assemblages. The L7 lode contains native arsenic–quartz veins in shallow levels and stibnite–quartz veins at depth. Gold-bearing minerals (electrum, native gold, and rarely aurostibite) mainly coexist with pääkönenite, stibnite, native arsenic, and native antimony. The crystallization of As- and Sb-bearing minerals was likely to have consumed H2S from the hydrothermal fluid, which probably triggered the precipitation of native gold. The L1 lode consists of several discontinuous sulfide-dominated lensoid orebodies. The massive sulfide ores that produced most of the gold resource are characterized by an intimate association between native bismuth and native gold mineralization.  相似文献   

7.
The paper reports the mineralogical and geochemical features of the Kysylga gold deposit located in the hornfelsed Norian sedimentary rocks and classified with low-sulfide gold–quartz type of deposits typical of the Verkhoyansk–Kolyma metallogenic province. Detailed typomorphic study of the major minerals (quartz, arsenopyrite, and gold) of the ore veins shows that the deposit is assigned to the gold–silver type. Mineralogical and geochemical data substantiate this conclusion.  相似文献   

8.
The Zijinshan high-sulfidation epithermal Cu–Au deposit is located in the Zijinshan ore field of South China, comprising porphyry–epithermal Cu–Au–Mo–Ag ore systems. The Cu ore body is more than 1000 m thick and is characterized by an assemblage of digenite–covellite–enargite–alunite. Digenite is the dominant Cu-bearing mineral, which makes this deposit unique, although the mechanisms of digenite formation remain controversial. To elucidate the genesis of digenite, this paper presents the Cu isotopic compositions of Cu-sulfides in the Zijinshan high-sulfidation Cu–Au deposit. The Cu isotopic values (65Cu relative to NIST 976) of all samples range from −2.97‰ to +0.34‰, and most values fall in a narrow range from −0.49‰ to +0.34‰, which is similar to the Cu isotopic signature of typical porphyry systems. Copper isotope ratios of each mineral decrease with increasing depth, a trend that is also typical of porphyry deposits. The variation tendency of δ65Cu values between sulfides is consistent with the sequence of mineral formation. These observations suggest that the Cu-sulfides in the Zijinshan Cu–Au deposit have a hypogene origin.  相似文献   

9.
The Zhaima gold–sulfide deposit is located in the northwestern part of the West Kalba gold belt in eastern Kazakhstan. The mineralization is hosted in Lower Carboniferous volcanic and carbonate rocks formed under conditions of marginal-sea and island-arc volcanic activity. The paper considers the mineralogy and geochemistry of primary gold–sulfide ore and Au-bearing weathering crusts. Au-bearing arsenopyrite–pyrite mineralization formed during only one productive stage. Disseminated, stringer–disseminated, and massive rocks are enriched in Ti, Cr, V, Cu, and Ni, which correspond to the mafic profile of basement. The main ores minerals are represented by finely acicular arsenopyrite containing Au (up to few tens of ppm) and cubic and pentagonal dodecahedral pyrite with sporadic submicroscopic inclusions of native gold. The sulfur isotopic composition of sulfides is close to that of the meteoritic standard (δ34S =–0.2 to +0.2). The 40Ar/39Ar age of three sericite samples from ore veinlets corresponds to the Early Permian: 279 ± 3.3, 275.6 ± 2.9, and 272.2 ± 2.9 Ma. The mantle source of sulfur, ore geochemistry, and spatial compatibility of mineralization with basic dikes allow us to speak about the existence of deep fluid–magmatic systems apparently conjugate with the Tarim plume.  相似文献   

10.
The paper considers for the first time the morphology, composition, and conditions of formation of the greisens of the Solnechnoe deposit (Komsomol’sk ore district), a typical cassiterite–silicate assemblage. The greisens are localized in the root parts of the deposit and represent a system of veins and veinlets formed in the contraction fractures of the metasomatically altered roof of the monzogranite intrusion (age of 94–92 Ma). The cassiterite–chlorite–carbonate–muscovite–quartz composition of the greisens with admixture of topaz, fluorite, and apatite reflects the composition of the monzogranites. The greisens are close in age (85.3 Ma on muscovite) to the granitic aplites (80–85 Ma on the whole-rock and biotite) of the final phase of the intrusive magmatism. The fluid regime of their formation differs from that of the economic ores in higher temperature, pressure, and salinity. One distinguishing feature of the greisens is elevated contents of LREE, U, and Th, which are incorporated in the REE fluorcarbonates, thorite, and uranothorite crystallizing together with cassiterite.  相似文献   

11.
The Sin Quyen Cu–Fe–Au–REE deposit is localized in the Proterozoic deposits of the Phan Xi Pang zone, northern Vietnam. The mineralization is formed by lenticular and sheet-like bodies occurring concordantly with the host rocks. Seventeen orebodies have been recognized in the deposit, which form an ore horizon up to 140 m in total thickness, about 2 km in strike, and up to 350 m in dip. The ores are of simple mineral composition: Au-rich copper and iron sulfides (chalcopyrite, pyrite, pyrrhotite) and iron oxides (magnetite, hematite). Gold and silver are distributed unevenly in the ores: Their contents vary from hundredths and tenths of ppm to 1.8 ppm. Copper sulfide ores are the main concentrator of gold and silver. All ores are characterized by high REE contents, tens and hundreds of times exceeding the element clarkes. The highest contents have been revealed for Ce and La. Orthite is the main carrier of REE. No correlation between REE and ore elements of sulfide-oxide ores has been revealed, which points to the independent formation of the mineralization. Orebodies together with the host rocks underwent metamorphism at 500–600 to 630–685 °C and 3–7 kbar. The spatial association of the mineralization with amphibolites (metamorphosed basites) and the mineral composition of ores suggest that the Sin Quyen deposit is of Cyprian volcanogenic type.  相似文献   

12.
The Drenchwater shale-hosted Zn–Pb–Ag deposit and the immediate vicinity, on the northern flank of the Brooks Range in north-central Alaska, is an ideal example of a naturally low pH system. The two drainages, Drenchwater and False Wager Creeks, which bound the deposit, differ in their acidity and metal contents. Moderately acidic waters with elevated concentrations of metals (pH ? 4.3, Zn ? 1400 μg/L) in the Drenchwater Creek drainage basin are attributed to weathering of an exposed base-metal-rich massive sulfide occurrence. Stream sediment and water chemistry data collected from False Wager Creek suggest that an unexposed base-metal sulfide occurrence may account for the lower pH (2.7–3.1) and very metal-rich waters (up to 2600 μg/L Zn, ? 260 μg/L Cu and ?89 μg/L Tl) collected at least 2 km upstream of known mineralized exposures. These more acidic conditions produce jarosite, schwertmannite and Fe-hydroxides commonly associated with acid-mine drainage. The high metal concentrations in some water samples from both streams naturally exceed Alaska state regulatory limits for freshwater aquatic life, affirming the importance of establishing base-line conditions in the event of human land development. The studies at the Drenchwater deposit demonstrate that poor water quality can be generated through entirely natural weathering of base-metal occurrences, and, possibly unmineralized black shale.  相似文献   

13.
The giant Dongshengmiao Zn–Pb–Cu deposit is located in the Langshan district, northern China. The ores are hosted within a Proterozoic rift sequence, which underwent lower greenschist facies metamorphism and shear deformation during development of Early Cretaceous intraplate orogenic belt. Northwest-dipping thrust faults, which share similar orientations and dip angles with the orebodies, are well developed in the mining area. Syngenetic stratabound sulfides were formed during the Proterozoic rifting event, but syngenetic ore textures have seldom been preserved except for some pretectonic fine-grained pyrite. Petrological observation, 39Ar/40Ar geochronology, combined with previous isotopic and fluid inclusion studies indicates that significant Zn–Pb–Cu remobilization took place as a result of thrust faulting associated with metamorphic devolatilization of ore-hosting rocks at ca. 136 Ma, coeval with the intraplate orogeny and regional crustal shortening. Sulfides were redistributed in shear structures or along grain boundaries of ore-hosting carbonates, and Fe-rich carbonates were ideal sites for Zn–Pb–Cu precipitation.  相似文献   

14.
The Tamlalt–Menhouhou gold deposit belongs to the Neoproterozoic–Palaeozoic Tamlalt inlier located in the Eastern High-Atlas (Morocco). It occurs in altered Upper Neoproterozoic bimodal volcanic and volcano-sedimentary units outcropping in the Tamlalt–Menhouhou area. Gold mineralization has been identified in quartz veins related to shear-zones associated with a strong quartz-phyllic-argillic alteration. Visible free gold is related to goethite–malachite–barite boxworks in quartz veins. The other alteration minerals accompanying gold mineralization are mainly carbonates, chlorite, hematite, albite and pyrite whose relative proportion defines three alteration types. 40Ar/39Ar geochronology performed on phengite grains from phyllic alteration and the auriferous quartz veins, yields plateau ages ranging from 300 ± 5 Ma to 284 ± 12 Ma with a weighted mean age of 293 ± 7 Ma. This identifies a Late Variscan age for the Tamlalt–Menhouhou “shear zones-related” gold deposit and emphasizes the consequences of the Variscan orogeny for gold mineralization in the High-Atlas and Anti-Atlas Neoproterozoic inliers.  相似文献   

15.
The Agnew–Wiluna greenstone belt in the Yilgarn Craton of Western Australia is the most nickel-sulfide-endowed komatiite belt in the world. The Agnew–Wiluna greenstone belt contains two mineralised units/horizons that display very different volcanological and geochemical features. The Mt Keith unit comprises >500 m-thick spinifex-free adcumulate-textured lenses, which are flanked by laterally extensive orthocumulate-textured units. Spinifex texture is absent from this unit. Disseminated nickel sulfides, interstitial to former olivine crystals, are concentrated in the lensoidal areas. Massive sulfides are locally present along the base or margins of the lenses or channels. The Cliffs unit is locally >150 m thick and comprises a sequence of differentiated spinifex-textured flow units. The basal unit is the thickest, and contains basal massive nickel-sulfide mineralisation. The Mt Keith and Cliffs units display important common features: (i) MgO contents of 25–30% in inferred parental magmas; and (ii) Al/Ti ratios of ～20 (Munro-type). However, the Mt Keith unit is highly crustally contaminated (e.g. LREE-enriched, high HFSEs), whereas the Cliffs unit does not display evidence of significant crustal assimilation. We argue that the distinct trace-element concentrations and profiles of the two komatiite units reflect their different emplacement style and country rocks: the Mt Keith unit is interpreted to have been emplaced as an intrusive sill into dacitic volcanic units whereas the Cliffs unit was extruded as lava flow onto tholeiitic basalts in a subaqueous environment. The mode of emplacement and nature of country rock is the single biggest factor in controlling mineralisation styles in komatiites. On the other hand, evidence of crustal contamination does not necessarily provide information of the prospectivity of komatiites to host Ni–Cu–(PGE) mineralisation, despite being a good proxy for the style of komatiite emplacement and the nature of country rocks.  相似文献   

16.
  相似文献   

17.
The Tieshan Fe–Cu deposit is located in the Edong district, which represents the westernmost and largest region within the Middle–Lower Yangtze River Metallogenic Belt (YRMB), Eastern China. Skarn Fe–Cu mineralization is spatially associated with the Tieshan pluton, which intruded carbonates of the Lower Triassic Daye Formation. Ore bodies are predominantly located along the contact between the diorite or quartz diorite and marbles/dolomitic marbles. This study investigates the mineral chemistry of magnetite in different skarn ore bodies. The contrasting composition of magnetite obtained are used to suggest different mechanisms of formation for magnetite in the western and eastern part of the Tieshan Fe–Cu deposit. A total of 178 grains of magnetite from four magnetite ore samples are analyzed by LA–ICP–MS, indicating a wide range of trace element contents, such as V (13.61–542.36 ppm), Cr (0.003–383.96 ppm), Co (11.12–187.55 ppm) and Ni (0.19–147.41 ppm), etc. The Ti/V ratio of magnetite from the Xiangbishan (western part of the Tieshan deposit) and Jianshan ore body (eastern part of the Tieshan deposit) ranges from 1.32 to 5.24, and 1.31 to 10.34, respectively, indicating a relatively reduced depositional environment in the Xiangbishan ore body. Incorporation of Ti and Al in magnetite are temperature dependent, which hence propose that the temperature of hydrothermal fluid from the Jianshan ore body (Al = 3747–9648 ppm, with 6381 ppm as an average; Ti = 381.7–952.0 ppm, with 628.2 ppm as an average) was higher than the Xiangbishan ore body (Al = 2011–11122 ppm, with 5997 ppm as an average, Ti = 302.5–734.8, with 530.8 ppm as an average), indicating a down–temperature precipitation trend from the Jianshan ore body to the Xiangbishan ore body. In addition, in the Ca + Al + Mn versus Ti + V diagram, magnetite is plotted in the skarn field, consideration with the ternary diagram of TiO2–Al2O3–MgO, proposing that the magnetite ores are formed by replacement, instead of directly crystallized from iron oxide melts, which provide a better understanding regarding the composition of ore fluids and processes responsible for Fe mineralization in the Tieshan Fe–Cu deposit.  相似文献   

18.
The Qianlishan granite complex, situated 16 km southeast of Chenzhou City, Hunan Province, China, hosts the Shizhuyuan W–Sn–Bi–Mo deposit. This complex, which intruded the Protozoic metasedimentary rocks and the Devonian clastic sedimentary and carbonate rocks, consists of mainly medium- to coarse-grained biotite granites and minor amounts of fine-grained biotite granite in addition to granite and quartz porphyry. K–Ar ages suggest three episodes of plutonism: the medium- to coarse-grained biotite granite (before 152 Ma), the fine-grained biotite granite (137 Ma), and the granite porphyry (129–131 Ma). Muscovite ages of the greisen are 145–148 Ma, suggesting that the W–Sn–Bi–Mo mineralization was related to the main, medium- to coarse-grained biotite granites. The K–Ar age of the hydrothermal vein mineralization is 92 Ma and is probably related to the porphyries.  相似文献   

19.
Mineralogical, textural, and chemical analyses (EPMA and PIXE) of hydrothermal rutile in the El Teniente porphyry Cu–Mo deposit help to better constrain ore formation processes. Rutile formed from igneous Ti-rich phases (sphene, biotite, Ti-magnetite, and ilmenite) by re-equilibration and/or breakdown under hydrothermal conditions at temperatures ranging between 400°C and 700°C. Most rutile nucleate and grow at the original textural position of its Ti-rich igneous parent mineral phase. The distribution of Mo content in rutile indicates that low-temperature (∼400–550°C), Mo-poor rutile (5.4 ± 1.1 ppm) is dominantly in the Mo-rich mafic wallrocks (high-grade ore), while high-temperature (∼550-700°C), Mo-rich rutile (186 ± 20 ppm) is found in the Mo-poor felsic porphyries (low-grade ore). Rutile from late dacite ring dikes is a notable exception to this distribution pattern. The Sb content in rutile from the high-temperature potassic core of the deposit to its low-temperature propylitic fringe remains relatively constant (35 ± 3 ppm). Temperature and Mo content of the hydrothermal fluids in addition to Mo/Ti ratio, modal abundance and stability of Ti-rich parental phases are key factors constraining Mo content and provenance in high-temperature (≥550°C) rutile. The initial Mo content of parent mineral phases is controlled by melt composition and oxygen fugacity as well as timing and efficiency of fluid–melt separation. Enhanced reduction of SO2-rich fluids and sulfide deposition in the Fe-rich mafic wallrocks influences the low-temperature (≤550°C) rutile chemistry. The data are consistent with a model of fluid circulation of hot (>550°C), oxidized (ƒO2 ≥ NNO + 1.3), SO2-rich and Mo-bearing fluids, likely exsolved from deeper crystallizing parts of the porphyry system and fluxed through the upper dacite porphyries and related structures, with metal deposition dominantly in the Fe-rich mafic wallrocks.  相似文献   

20.
The newly discovered Jiyuan Cu–Ag–(Pb–Zn–Au) deposit is located in the southern section of the eastern Tianshan orogenic belt, Xinjiang, northwestern China. It is the first documented deposit in the large Aqikekuduke Ag–Cu–Au belt in the eastern Tianshan orogen. Detailed field observations, parageneses, and fluid inclusion studies suggest an epithermal ore genesis for the main Cu–Ag mineralization, accompanied by a complicated hydrothermal alteration history most likely associated with the multi-stage tectonic evolution of the eastern Tianshan. The Jiyuan Cu–Ag ore bodies are located along the EW-striking, south-dipping Aqikekuduke fault and are hosted by Precambrian marble and intercalated siliceous rocks. Early-stage skarn alteration occurred along the contact zone between the marble layers and Early Carboniferous diorite–granodiorite and monzogranite intrusions; the skarns are characterized by diopside–tremolite–andradite–pyrite–(magnetite) assemblages. Local REE-enriched synchysite–rutile–arsenopyrite–(clinochlorite–microcline–albite) assemblages are related to K–Na alteration associated with the monzogranite intrusions and formed under conditions of high temperature (310°C) and high salinity (19.9 wt.% NaCl). Subsequent hydrothermal alteration produced a series of quartz and calcite veins that precipitated from medium- to low-temperature saline fluids. These include early ‘smoky’ quartz veins (190°C; 3.0 wt.% NaCl) that are commonly barren, coarse-grained Cu–Ag mineralized quartz veins (210°C; 2.4 wt.% NaCl), and late-stage unmineralized calcite veins (140°C; 1.1 wt.% NaCl). Tremolite and Ca-rich scapolite veins formed at an interval between early and mineralized quartz veins, indicating a high-temperature, high-salinity (>500°C; 9.5 wt.% NaCl) Ca alteration stage. Fluid mixing may have played an important role during Cu–Ag mineralization and an external low-temperature Ca-rich fluid is inferred to have evolved in the ore-forming system. The Jiyuan auriferous quartz veins possess fluid characteristics distinct from those of the Cu–Ag mineralized quartz veins. CO2-rich fluid inclusions, fluid boiling, and mixing all demonstrate that these auriferous quartz veins acted as hosts for the orogenic-type gold mineralization, a common feature in the Tianshan orogenic belt.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号