共查询到20条相似文献，搜索用时 31 毫秒
1.
The dynamic response of an elastic continuously nonhomogeneous soil layer over bedrock retained by a pair of rigid cantilever walls to a horizontal seismic motion and the associated seismic pressure acting on these walls are determined analytically–numerically. The soil non-homogeneity is described by a shear modulus increasing nonlinearly with depth. The problem is solved in the frequency domain under conditions of plane strain and its exact solution is obtained analytically. This is accomplished with the aid of Fourier series along the horizontal direction and solution of the resulting system of two ordinary differential equations with variable coefficients by the method of Frobenius in power series. Due to the complexity of the various analytical expressions, the final results are determined numerically. These results include seismic pressures, resultant horizontal forces and bending moments acting on the walls. The solution of the problem involving a single retaining wall can be obtained as a special case by assuming the distance between the two walls to be very large. Results are presented in terms of numerical values and graphs using suitable dimensionless quantities. The effect of soil non-homogeneity on the system response is assessed through comparisons for typical sets of the parameters involved. 相似文献
2.
3.
This work deals with the evaluation of the dynamic pressures and the associated forces on a pair of rigid vertical cantilever walls retaining a uniform, fully saturated poroelastic layer of soil. Hysteretic damping in the soil skeleton may also be present. Wall pressures and forces are induced by horizontal ground shaking harmonically varying with time and spatially invariant. The problem is solved analytically under conditions of plane strain. The governing partial differential equations of motion, after separation of variables and the simplifying assumptions of zero vertical normal stresses and zero horizontal variation of vertical displacements, reduce to a system of two ordinary differential equations for the amplitudes of the solid skeleton horizontal displacement and the pore water pressure, which are easily solved. The parameters examined include the ratio of the distance between walls to the height of the retained soil material and the soil material properties such as porosity, permeability and damping. The comprehensive numerical data presented indicate that the displacements, wall pressures and resultant forces are highly dependent on the distance between the walls for any values of porosity and permeability. 相似文献
4.
5.
In this paper the stability of a tied-back wall subjected to seismic loads is analysed for a predetermined mode of failure (rotation about the top of the wall) and the analysis is compared with data from tests on this type of wall using the seismic simulator at the State University of New York at Buffalo. We carried out a pseudo-static analysis of the problem using the Mononobe-Okabe earth pressure coefficients, wherein the dynamic effects due to the seismic loading are converted into equivalent static loads. The acceleration ratio at which the wall fails by rotation about the top was obtained by considering the moments due to the various lateral earth pressure resultants and the inertial forces induced in the soil due to the seismic loading. We found that the presence of wall friction on the passive side significantly enhances the stability of the flexible retaining wall under seismic loads. Thus, flexible retaining walls supporting dry cohesionless soil can be very efficient during earthquakes. Under moderate earthquakes, an increase in the depth of embedment increases the dynamic factor of safety significantly. However, beyond a certain acceleration ratio for a soil with a particular value of ø, any increase in the depth of emdedment has no effect in impeding failure, irrespective of any change in the geometry of the system. Seismic design charts are presented to evaluate the stability of, and to design, flexible retaining walls embedded in dry cohesionless soils under seismic loading. 相似文献
6.
Erol Guler Elif Cicek M. Melih Demirkan Murat Hamderi 《Bulletin of Earthquake Engineering》2012,10(3):793-811
Novel approaches to the dynamic analysis of the reinforced soil walls have been reported in the literature. Use of marginal soils reduces the cost of geosynthetic reinforced soil walls if proper drainage measures are taken. Therefore the affect of using cohesive marginal soils as backfill in geosynthetic reinforced retaining structures were investigated in this research. The dynamic response of reinforced soil walls was investigated in a similar focus, using finite element analysis. The results obtained from walls with cohesive backfill were compared to the results obtained from walls with granular backfill. The height of the wall was chosen as 6 m in the two-dimensional plane strain finite element model and the base acceleration was chosen to be a harmonic motion. The effects of various parameters like the backfill type, facing type, reinforcement stiffness, and peak ground acceleration on the cyclic response of reinforced soil retaining walls were investigated. After analyzing the wall response for end of construction and dynamic excitation phases, it was determined that the deformations and reinforcement tensile loads increased during the cyclic load application and that the amount of additional deformation that occurred during cyclic load application was strongly related to backfill soil type, facing type, reinforcement type and peak ground acceleration. It was determined that a cohesive backfill and geotextile reinforcement was a good combination to reduce the deformations of geosynthetic reinforced walls during cyclic loading for medium height walls. 相似文献
7.
Green''''s functions for uniformly distributed loads acting on an inclined line in a poroelastic layered site 总被引：4，自引：0，他引：4
Based on one type of practical Biot's equation and the dynamic-stiffness matrices of a poroelastic soil layer and half-space, Green's functions were derived for uniformly distributed loads acting on an inclined line in a poroelastic layered site. This analysis overcomes significant problems in wave scattering due to local soil conditions and dynamic soil-structure interaction. The Green's functions can be reduced to the case of an elastic layered site developed by Wolf in 1985. Parametric studies are then carried out through two example problems. 相似文献
8.
In this study, a validated Finite Element procedure was used to investigate the similarities and differences of seismic performances between single- and multi-tiered reinforced soil walls. Three-tiered walls at a total height of 9 m were analyzed together with vertical walls at the same height. It was found from the Finite Element analyses that the resonant frequency of reinforced soil walls might increase with an increase in the tier-offset. The multi-tiered configuration could considerably reduce the residual lateral facing displacement and the average reinforcement load, and the reinforcement load distribution with height was different from that in vertical walls. With the same reinforcement length and spacing, the multi-tiered walls resulted in smaller reinforcement connection loads with the facing blocks. The study filled the gap of seismic behavior of multi-tiered reinforced soil retaining walls and revealed a few unique dynamic properties of this type of earth structures. 相似文献
9.
介绍基于性能抗震设计的核心理念,以支挡结构震害调查分析为背景,阐述开展高烈度区重力式挡墙基于性能抗震设计研究的必要性;构建重力式挡墙基于性能的抗震设计框架,归类分析现行规范与基于性能抗震设计的关键技术问题;依据支挡结构震害调查及大型振动台模型试验,提出位移指数可作为衡量挡墙抗震性能的量化指标,确定重力式挡墙基于性能抗震设计的性能准则及流程;经对比计算基于性能与规范抗震设计的挡墙算例,显示基于性能抗震设计的优越性,为高烈度区重力式挡墙基于性能抗震设计的工程应用提出建议。 相似文献
10.
Green＇s functions for uniformly distributed loads acting on an inclined line in a poroelastic layered site 总被引：2，自引：1，他引：1
Based on one type of practical Biot＇s equation and the dynamic-stiffness matrices ofa poroelastic soil layer and half-space, Green＇s functions were derived for unitformly distributed loads acting on an inclined line in a poroelastie layered site. This analysis overcomes significant problems in wave scattering due to local soil conditions and dynamic soil-structure interaction. The Green＇s functions can be reduced to the case of an elastic layered site developed by Wolf in 1985. Parametric studies are then carried out through two example problems. 相似文献
11.
The dynamic response of a tunnel buried in a two-dimensional poroelastic soil layer subjected to a moving point load was investigated theoretically. The tunnel was simplified as an infinite long Euler–Bernoulli beam, which was placed parallel to the traction-free ground surface. The saturated layer was governed by Biot’s theory. Combined with the specified boundary conditions along the beam and saturated poroelastic layer, the coupled equations of the system were solved analytically in the frequency–wavenumber domain based on Fourier transform. The time domain responses were obtained by the fast inverse Fourier transform. The critical velocity of the considered structure was determined from the dispersion curves. The different dynamic characteristics of the elastic soil medium and the saturated poroelastic medium subjected to the underground moving load were investigated. It is concluded that, for coarse materials or fine materials subjected to the high-velocity loading, models ignoring the coupling effects between the pore fluid and the soil skeleton may cause errors. The shear modulus and the permeability coefficients of the saturated soil as well as the load moving velocity had significant influence on the displacement and pore pressure responses. 相似文献
12.
D. D. Theodorakopoulos A. P. Chassiakos D. E. Beskos 《Soil Dynamics and Earthquake Engineering》2001,21(4)
The problem of the determination of dynamic pressures and the associated forces on a rigid, vertical cantilever wall retaining a semi-infinite, uniform, fully-saturated poroelastic layer of soil is solved analytically under conditions of plane strain. Hysteretic damping in the soil skeleton may also be present. The rigid wall and the base of the soil layer are both excited by an acceleration harmonically varying with time and spatially invariant. The governing partial differential equations of motion, after separation of variables and the simplifying assumption of zero vertical normal stresses, reduce to a system of two ordinary differential equations for the amplitudes of the horizontal solid skeleton displacement and the pore water pressure, which are easily solved. Soil displacements and stresses, wall pressures and resultant forces as well as the pore water pressure are explicitly expressed. Their variation with frequency, hysteretic damping, porosity and permeability is numerically computed in order to assess the relative importance of the various parameters on the response. 相似文献
13.
T. Senjuntichai S. Mani R.K.N.D. Rajapakse 《Soil Dynamics and Earthquake Engineering》2006,26(6-7):626-636
This paper considers time-harmonic vertical vibration of an axisymmetric rigid foundation embedded in a homogeneous poroelastic soil. The soil domain is represented by a homogeneous poroelastic half space that is governed by Biot's theory of poroelastodynamics. The foundation is subjected to a time-harmonic vertical load and is perfectly bonded to the surrounding half space. The contact surface can be either fully permeable or impermeable. The dynamic interaction problem is solved by employing an indirect boundary integral equation method. The kernel functions of the integral equation are the influence functions corresponding to vertical and radial ring loads, and a ring fluid source applied in the interior of a homogeneous poroelastic half space. Analytical techniques are used to derive the solution for influence functions. The indirect boundary integral equation is solved by using numerical quadrature. Selected numerical results for vertical impedance of rigid foundations are presented to demonstrate the influence of poroelastic effect, foundation geometry, hydraulic boundary condition along the contact surface and frequency of excitation. 相似文献
14.
The problem of harmonic wave diffraction by tunnels in an infinite poroelastic saturated soil obeying Biot's theory is studied numerically under conditions of plane strain and the effect of poroelasticity on the response is assessed through some parametric studies. The method is based on the theory of Mei and Foda, which considers the total field to be approximated by the superposition of an elastodynamic problem with modified elastic constants and mass density for the whole domain and a diffusion problem for the pore fluid pressure confined to a boundary layer at the free boundaries. Both problems are solved numerically by the boundary element method in the frequency domain. Results dealing with the response of a circular tunnel with and without an elastic concrete liner in an infinite poroelastic medium to incident harmonic P and SV plane waves are provided and compared against analytical ones as well as to those corresponding to linear elastic soil behaviour. Copyright © 2002 John Wiley & Sons, Ltd. 相似文献
15.
Dynamic effects of moving loads on road pavements: A review 总被引：3，自引：0，他引：3
This review paper deals with the dynamic response of road pavements to moving loads on their surface. The road pavement can be modeled as a beam, a plate, or the top layer of a layered soil medium. The foundation soil can be modeled as a system of elastic springs and dashpots or a homogeneous or layered half-space. The material behavior of the pavement can be elastic or viscoelastic, while that of the foundation layers elastic, viscoelastic, water-saturated poroelastic or even inelastic. The loads are concentrated or distributed of finite extent, may vary with time and move with constant or variable speed. The analysis is done by analytical, analytical/numerical and purely numerical methods, such as finite element and boundary element methods, under conditions of plane strain or full three-dimensionality. A number of representative examples is presented in order to illustrate the problem and the methods of analysis, demonstrate the dynamic effects of moving loads on the layered soil medium and indicate the implications of the results on road and airport pavement design. 相似文献
16.
土工格栅加筋挡土墙是一种柔性挡土结构,目前尚未建立较严密的设计方法,作用在土工格栅加筋墙壁上的地震动土压力研究是抗震设计的重要内容之一。应用基于拉格朗日法的完全非线性动有限差分法研究整体面板式土工格栅加筋土挡壁在地震作用下各设计参数对挡壁动土压力的影响。采用弹塑性模型模拟填土,采用耦合弹性参数描述格栅与土接触界面特性,参数包括加筋间距、长度、刚度、地震强度和填土性质等,分析墙壁的动土压力沿墙身的分布特征,得出了影响地震动土压力的显著参数,证明了土工格栅加筋墙体的优异吸震能力,研究结果为整体面板式土工格栅加筋土挡墙抗震设计中的动土压力研究提供参考。 相似文献
17.
18.
Seong-Bae Jo Jeong-Gon Ha Mintaek Yoo Yun Wook Choo Dong-Soo Kim 《Bulletin of Earthquake Engineering》2014,12(2):961-980
In the design procedure for a retaining wall, the pseudo-static method has been widely used and dynamic earth pressure is calculated by the Mononobe–Okabe method, which is an extension of Coulomb’s earth pressure theory computed by force equilibrium. However, there is no clear empirical basis for treating the seismic force as a static force, and recent experimental research has shown that the Mononobe–Okabe method is quite conservative, and there exists a discrepancy between the assumed conditions and real seismic behavior during an earthquake. Two dynamic centrifuge tests were designed and conducted to reexamine the Mononobe–Okabe method and to evaluate the seismic lateral earth pressure on an inverted T-shape flexible retaining wall with a dry medium sand backfill. Results from two sets of dynamic centrifuge experiments show that inertial force has a significant impact on the seismic behavior on the flexible retaining wall. The dynamic earth pressure at the time of maximum moment during the earthquake was not synchronized and almost zero. The relationship between the back-calculated dynamic earth pressure coefficient at the time of maximum dynamic wall moment and the peak ground acceleration obtained from the wall base peak ground acceleration indicates that the seismic earth pressure on flexible cantilever retaining walls can be neglected at accelerations below 0.4 g. These results suggest that a wall designed with a static factor of safety should be able to resist seismic loads up to 0.3–0.4 g. 相似文献
19.
重力式挡土墙在地震作用下的土压力特性一直是挡土墙设计的重要内容。本文通过数值模拟,在挡土墙墙背轴线上设置一系列监测点,得到地震过程中监测点的加速度、土压力强度时程曲线;然后根据时程曲线分析墙后土压力强度分布特征、根据土压力强度分布求出总土压力、根据总土压力求出其对墙趾的力矩;最后分别将土压力强度分布、总土压力、总土压力对墙趾的力矩与现有的研究方法及规范对比。结果表明:地震作用下墙背各点加速度峰值在同时刻发生,但土压力峰值不在同时刻发生;现有的一些研究方法未考虑土压力强度峰值时程变化,其结果比实际偏大;在低地震烈度条件下,规范计算的总土压力及倾覆力矩偏于保守,而在高烈度条件下则偏于危险。 相似文献
20.
Because of its excellent seismic performance, reinforced soil retaining walls are increasingly used in civil engineering. Although many countries have published corresponding design codes, the differences between them are still relatively large. Using the FHWA Code and the Code for Seismic Design of Railway Engineering (CSDRE), stability calculations of reinforced soil retaining walls were carried out and the similarities and differences between these two design codes were analyzed. According to the comparative analysis, the following conclusions are drawn: the inertia force, the earth pressure and the tensile force of reinforcements calculated from the CSDRE are less than those from the FHWA Code, and the safety factor calculated from the former is larger. Although the M-O method is recommended to calculate the dynamic earth pressure, the FHWA Code suggests a higher action point as compared to the CSDRE. 相似文献