共查询到20条相似文献，搜索用时 31 毫秒
1.
The Late Cretaceous–Cenozoic evolution of the North German Basin has been investigated by 3-D thermomechanical finite element modelling. The model solves the equations of motion of an elasto-visco-plastic continuum representing the continental lithosphere. It includes the variations of stress in time and space, the thermal evolution, surface processes and variations in global sea level.The North German Basin became inverted in the Late Cretaceous–Early Cenozoic. The inversion was most intense in the southern part of the basin, i.e. in the Lower Saxony Basin, the Flechtingen High and the Harz. The lower crustal properties vary across the North German Basin. North of the Elbe Line, the lower crust is dense and has high seismic velocity compared to the lower crust south of the Elbe Line. The lower crust with high density and high velocity is assumed to be strong. Lateral variations in lithospheric strength also arise from lateral variations in Moho depth. In areas where the Moho is deep, the upper mantle is warm and the lithosphere is thereby relatively weak.Compression of the lithosphere causes shortening, thickening and surface uplift of relatively weak areas. Tectonic inversion occurs as zones of preexisting weakness are shortened and thickened in compression. Contemporaneously, the margins of the weak zone subside. Cenozoic subsidence of the northern part of the North German Basin is explained as a combination of thermal subsidence and a small amount of deformation and surface uplift during compression of the stronger crust in the north.The modelled deformation patterns and resulting sediment isopachs correlate with observations from the area. This verifies the usefulness and importance of thermomechanical models in the investigation of intraplate sedimentary basin formation. 相似文献
2.
研究区位处华北克拉通中部造山带,在中-新生代经历了多次构造体制与区域构造属性的重大转变。对吕梁山脉中北段古元古代花岗岩体隆升剥露的定量化研究,可以更加整体、直观的认识中部构造带内基底岩石隆升剥露作用,有助于了解华北克拉通演化过程。同时能为周围能源型盆地的形成演化提供佐证,深化对盆地资源赋存条件的认识,从而为资源的开发提供基础证据。通过对研究区古元古代花岗岩体系统的裂变径迹热年代学采样分析,揭示了基底岩石初始隆升剥露作用发生在晚白垩世至新生代早期,主要有两个阶段:白垩世晚期约88~77Ma和新生代早期约65~53Ma。之后,样品处在磷灰石退火带之上,虽有短暂的再次埋藏,但总体一直处在抬升剥露作用下。磷灰石裂变径迹数据和热史模拟表明,不同岩体抬升剥蚀在时空上具有非均衡性,晚白垩世早期,中部关帝山岩体呈穹隆状隆升剥蚀。北部芦芽山岩体和云中山岩体晚白垩世遭受挤压,发生隆褶变形。新生代以来,岩体加速隆升,早期(65~53Ma)是岩体抬升-剥露速率出现转折的关键时期,与东西两侧相邻断陷的发育具成因上的耦合联系,在华北地块中部地区具有区域响应,并可能奠定了现今吕梁山脉中北段的地势发展格局。 相似文献
3.
地质晚近时期山脉地区隆升及剥露作用研究 总被引：6，自引：0，他引：6
对地质晚近时期,特别是新生代以来山脉隆升剥蚀历程的研究,历来受到人们的十分关注。文中介绍了几种有关研究方法的一些新进展：（１）利用宇宙核素估算山体表面剥蚀速率和表面隆升速率;（２）利用磷灰石裂变径迹研究山脉地区岩石的隆升剥露;（３）利用地貌有关参数判断因侵蚀作用引起的均衡抬升和构造作用引起的构造抬升在山脉地区高峰形成中的贡献。 相似文献
4.
Angelos Mavromatidis 《International Journal of Earth Sciences》2008,97(3):623-634
Seismic reflection profiles indicate the compressive nature of the structural style associated with the major uplift events
in the Cooper–Eromanga Basins. Inversion geometries and reactivated features attest to a period of compression during Late
Triassic–Early Jurassic times. In the Eromanga Basin, compressional structural styles associated with Late Cretaceous–Tertiary
are apparent. Many of the Late Cretaceous–Tertiary structures coincide with exhumation highs in Late Cretaceous–Tertiary times.
The two-layer lithospheric compression model is considered as the most complete explanation of both the uplift of areas subject
to compression and crustal thickening, and of the regional uplift of areas not subject to any apparent Late Cretaceous–Tertiary
compression. In the model, compression and thickening in the lower lithosphere is decoupled and laterally displaced from that
in the upper crust. Thickening of the mantle lithosphere without thickening of the overlying crust can account for the initial
subsidence then uplift of not inverted platform areas. The opening of the Tasman Sea and the Coral Seas can lead to stress
transmission in the interior of the continent. These stresses are likely to generate uplift but cannot explain the distribution
of uplift in areas not subject to compression. 相似文献
5.
龙门山晚新生代均衡反弹隆升的定量研究 总被引：1，自引：0，他引：1
龙门山位于青藏高原东缘与四川盆地的交接部位,是青藏高原周边山脉中地形梯度变化最大的山脉,其隆升过程和机制一直是国际地学界关注的焦点。晚新生代经过大量的滑坡、泥石流等快速剥蚀作用,龙门山的高程却不断升高。讨论了龙门山构造隆升的3种地球动力学机制,即下地壳通道流机制、地壳挤压缩短变形机制、地壳均衡反弹机制。晚新生代龙门山的隆升与剥蚀引起的均衡反弹作用相关,剥蚀作用使得地壳岩石逐步被移去,剥蚀区重力损失,岩石圈或地壳卸载作用导致山脉顶峰的隆升。结合数字高程模型数据研究表明,巨大地震的长期同震构造变形以及滑坡、泥石流等引起的快速剥蚀所导致的地壳均衡反弹,可能是龙门山晚新生代构造隆升的地球动力学新机制。龙门山地区现今高程受构造作用与剥蚀引起的均衡反弹作用的共同影响,其中剥蚀引起的均衡反弹作用对龙门山隆升的影响贡献率约占30%。 相似文献
6.
Contractional structures (large anticlines and synclines, reverse faults and inverted centres of deposition) of assumed Late Cretaceous–Cenozoic age are common in Cretaceous–Tertiary basins of the northwestern European margin. The similarities in style, orientation and timing of these structures are striking. The present detailed analysis of one anticline (the Ormen Lange Dome) of the mid-Norwegian continental shelf indicates that the total contraction is moderate (less than 2–3%), and that the analysed anticline has been growing almost continuously since its initiation in Eocene till Present. Inversion in the Barents Sea started already in the Late Cretaceous. This episode is suggested to be related to far-field effects of active plate-margin processes, and transfer of stresses across the plate as a consequence of the sub Hercynian and Paleocene ‘Laramide' event of the Alpine Orogeny. The development of co-axial structures was facilitated by stress focusing along pre-existing, high-relief N–S- and NE–SW-trending fault complexes. Far-field plate tectonic stresses originating mainly from the Alpine Orogeny seem to have been the most important cause of contractional deformation on the NW European shelf. In addition, ridge push from the North Atlantic spreading may have contributed significantly, particularly during the Neogene. 相似文献
7.
Magdalena Scheck Ulf Bayer Volker Otto Juliette Lamarche Dirk Banka Tim Pharaoh 《Tectonophysics》2002,360(1-4):281-299
The Elbe Fault System (EFS) is a WNW-striking zone extending from the southeastern North Sea to southwestern Poland along the present southern margin of the North German Basin and the northern margin of the Sudetes Mountains. Although details are still under debate, geological and geophysical data reveal that upper crustal deformation along the Elbe Fault System has taken place repeatedly since Late Carboniferous times with changing kinematic activity in response to variation in the stress regime. In Late Carboniferous to early Permian times, the Elbe Fault System was part of a post-Variscan wrench fault system and acted as the southern boundary fault during the formation of the Permian Basins along the Trans-European Suture Zone (sensu [Geol. Mag. 134 (5) (1997) 585]). The Teisseyre–Tornquist Zone (TTZ) most probably provided the northern counterpart in a pull-apart scenario at that time. Further strain localisation took place during late Mesozoic transtension, when local shear within the Elbe Fault System caused subsidence and basin formation along and parallel to the fault system. The most intense deformation took place along the system during late Cretaceous–early Cenozoic time, when the Elbe Fault System responded to regional compression with up to 4 km of uplift and formation of internal flexural highs. Compressional deformation continued during early Cenozoic time and actually may be ongoing. The upper crust of the Elbe Fault System, which itself reacted in a more or less ductile fashion, is underlain by a lower crust characterised by low P-wave velocities, low densities and a weak rheology. Structural, seismic and gravimetric data as well as rheology models support the assumption that a weak, stress-sensitive zone in the lower crust is the reason for the high mobility of the area and repeated strain localisation along the Elbe Fault System. 相似文献
8.
Effect of local variations of vertical and horizontal stresses on the Cenozoic structuring of the mid-Norwegian shelf 总被引：1，自引：1，他引：0
I. Grunnaleite W. Fjeldskaar J. Wilson J.I. Faleide J. Zweigel 《Tectonophysics》2009,470(3-4):267-283
The mid-Norwegian margin has a complex history and has experienced several phases of changing horizontal and vertical stresses on regional and local scale during the Cenozoic time. In addition to regional stresses related to the opening of the North Atlantic (i.e. ridge push), local variations in stress history may be important for development, distribution and reactivation of structures in the Vøring area in Cenozoic time. Presence and stability of flexural hinge zones between areas of relative uplift and subsidence have played an important role for focusing shallow horizontal stresses within the basins. Emplacement of lower crustal bodies during break-up will, whatever the nature of these bodies, have substantial isostatic effects, and modelling show that this could cause many hundred meters of temporal uplift above the lower crustal bodies, locally exceeding 1300 m of surface uplift. Effects of intra plate stress (IPS) are modelled along three 2D transects across the Vøring Basin. Modelling shows that IPS may have given substantial vertical motions in certain areas of the mid-Norwegian shelf, both with extensional IPS at the time of break-up, and later with compressive IPS during Tertiary time. The modelling assumes a strongly reduced effective elastic thickness (EET) due to lithospheric heating at break-up and later increasing EET as the lithosphere cooled towards present time. Our modelling takes into account the tectonic and isostatic effects of loading faulting and lithospheric thinning throughout the geological history, including several phases of extension prior to the Cenozoic compression. This approach emphasizes the importance of the deformation history of the lithosphere compared to other studies that only take into account the effects of Cenozoic processes of compression and loading on the sedimentary units. We do not state that isostatic uplift or intra plate stress are the most important causes for Cenozoic uplift and compressional deformation in this area, but point to the fact that these factors locally may have played an important role in focusing deformation caused by an interplay of different mechanisms. 相似文献
9.
The Western Black Sea basin opened during Cretaceous times by back-arc rifting in association with a north dipping subduction at the rear of the Cretaceous–Early Tertiary Pontide volcanic arc. The sedimentary wedge developed on the shelf of the Romanian Black Sea sector reflects a complex interplay between large scale rifting, uplift of the orogenic flanks, large-scale post-rift subsidence and sea level changes. We examine the detailed structural configuration of this sector for a regional correlation with the adjacent offshore in Ukraine and Bulgaria. The evolution of the western Black Sea basin started in the Albian–Cenomanian times, when two extensional phases with significantly different directions (N–S and subsequently E–W) lead to the formation of a complex interplay between isolated blocks organised in horsts and grabens generally deepening eastwards. Superposition of normal faults footwall blocks from the two extensional episodes generated a deeply subsided area with enhanced accommodation space, i.e., the Histria Depression, and, consequently, recorded a larger thickness of Paleogene sediments in the post-rift stage. (Re)activation of faults and associated folding reflects repeated inversion during the Late Cretaceous–Oligocene times, associated with subsequent periods of non-deposition and/or erosion during moments of basin fill exposure. These periods of inversion recorded in the Black Sea are controlled by coeval orogenic deformations taking place in the Balkans, Pontides and the Crimean thrust belt. Sea level fluctuations during the Neogene and late Alpine tectonics in the neighbouring orogens caused massive sedimentation followed by sediment starvation and/or significant erosion. Large thicknesses of sediments accumulated during the Pontian, presumably associated with an extensional episode deepening the distal parts of the basin and with differential compaction structures. The interpretation of a high-quality seismic dataset combined with published data allowed the correlation of major structural units and lineaments defined onshore towards the Carpathians with the ones deeply buried below the western Black Sea basin sediments. Unit correlations are furthermore used to derive an integrated tectonic image of the western Black Sea area. 相似文献
10.
The topographic evolution of the “passive” margins of the North Atlantic during the last 65 Myr is the subject of extensive debate due to inherent limitations of the geological, geomorphological and geophysical methods used for studies of uplift and subsidence. We have compiled a database of sign, time and amplitude (where possible) of topographic changes in the North Atlantic region during the Cenozoic (65–0 Ma). Our compilation is based on published results from reflection seismic studies, AFT (apatite fission track) studies, VR (vitrinite reflectance) trends, maximum burial, sediment supply studies, mass balance calculations and extrapolation of seismic profiles to onshore geomorphological features. The integration of about 200 published results reveal a clear pattern of topographic changes in the North Atlantic region during the Cenozoic: (1) The first major phase of Cenozoic regional uplift occurred in the late Palaeocene–early Eocene (ca 60–50 Ma), probably related to the break-up of the North Atlantic between Europe and Greenland, as indicated by the northward propagation of uplift. It was preceded by middle Palaeocene uplift and over-deepening of some basins of the North Sea and the surrounding areas. (2) A regional increase in subsidence in the offshore marginal areas of Norway, the northern North Sea, the northern British Isles and west Greenland took place in the Eocene (ca 57–35 Ma). (3) The Oligocene and Miocene (35–5 Ma) were characterized by regional tectonic quiescence, with only localised uplift, probably related to changes in plate dynamics. (4) The second major phase of regional uplift that affected all marginal areas of the North Atlantic occurred in the Plio-Pleistocene (5–0 Ma). Its amplitude was enhanced by erosion-driven glacio-isostatic compensation. Despite inconclusive evidence, this phase is likely to be ongoing at present. 相似文献
11.
Martin Bak Hansen Holger Lykke-Andersen Ali Dehghani Dirk Gajewski Christian Hübscher Morten Olesen Klaus Reicherter 《International Journal of Earth Sciences》2005,94(5-6):1070-1082
A dense grid of multichannel high-resolution seismic sections from the Bay of Kiel in the western Baltic Sea has been interpreted
in order to reveal the Mesozoic and Cenozoic geological evolution of the northern part of the North German Basin. The overall
geological evolution of the study area can be separated into four distinct periods. During the Triassic and the Early Jurassic,
E–W extension and the deposition of clastic sediments initiated the movement of the underlying Zechstein evaporites. The deposition
ceased during the Middle Jurassic, when the entire area was uplifted as a result of the Mid North Sea Doming. The uplift resulted
in a pronounced erosion of Upper Triassic and Lower Jurassic strata. This event is marked by a clear angular unconformity
on all the seismic sections. The region remained an area of non-deposition until the end of the Early Cretaceous, when the
sedimentation resumed in the area. Throughout the Late Cretaceous the sedimentation took place under tectonic quiescence.
Reactivated salt movement is observed at the Cretaceous Cenozoic transition as a result of the change from an extensional
to compressional regional stress field. The vertical salt movement influenced the Cenozoic sedimentation and resulted in thin-skinned
faulting. 相似文献
12.
The Roer Valley Rift System (RVRS) is located between the West European rift and the North Sea rift system. During the Cenozoic, the RVRS was characterized by several periods of subsidence and inversion, which are linked to the evolution of the adjacent rift systems. Combination of subsidence analysis and results from the analysis of thickness distributions and fault systems allows the determination of the Cenozoic evolution and quantification of the subsidence. During the Early Paleocene, the RVRS was inverted (Laramide phase). The backstripping method shows that the RVRS was subsequently mainly affected by two periods of subsidence, during the Late Paleocene and the Oligocene–Quaternary time intervals, separated by an inversion phase during the Late Eocene. During the Oligocene and Miocene periods, the thickness of the sediments and the distribution of the active faults reveal a radical rotation of the direction of extension by about 70–80° (counter clockwise). Integration of these results at a European scale indicates that the Late Paleocene subsidence was related to the evolution of the North Sea basins, whereas the Oligocene–Quaternary subsidence is connected to the West European rift evolution. The distribution of the inverted provinces also shows that the Early Paleocene inversion (Laramide phase) has affected the whole European crust, whereas the Late Eocene inversion was restricted to the southern North Sea basins and the Channel area. Finally, comparison of these deformations in the European crust with the evolution of the Alpine chain suggests that the formation of the Alps has controlled the evolution of the European crust since the beginning of the Cenozoic. 相似文献
13.
The Rhine Rift System (RRS) forms part of the European Cenozoic Rift System (ECRIS) and transects the Variscan Orogen, Permo-Carboniferous troughs and Late Permian to Mesozoic thermal sag basins. Crustal and lithospheric thicknesses range in the RRS area between 24–36 km and 50–120 km, respectively. We discuss processes controlling the transformation of the orogenically destabilised Variscan lithosphere into an end-Mesozoic stabilised cratonic lithosphere, as well as its renewed destabilisation during the Cenozoic development of ECRIS. By end-Westphalian times, the major sutures of the Variscan Orogen were associated with 45–60 km deep crustal roots. During the Stephanian-Early Permian, regional exhumation of the Variscides was controlled by their wrench deformation, detachment of subducted lithospheric slabs, asthenospheric upwelling and thermal thinning of the mantle-lithosphere. By late Early Permian times, when asthenospheric temperatures returned to ambient levels, lithospheric thicknesses ranged between 40 km and 80 km, whilst the thickness of the crust was reduced to 28–35 km in response to its regional erosional and local tectonic unroofing and the interaction of mantle-derived melts with its basal parts. Re-equilibration of the lithosphere-asthenosphere system governed the subsidence of Late Permian-Mesozoic thermal sag basins that covered much of the RRS area. By end-Cretaceous times, lithospheric thicknesses had increased to 100–120 km. Paleocene mantle plumes caused renewed thermal weakening of the lithosphere. Starting in the late Eocene, ECRIS evolved in the Pyrenean and Alpine foreland by passive rifting under a collision-related north-directed compressional stress field. Following end-Oligocene consolidation of the Pyrenees, west- and northwest-directed stresses originating in the Alps controlled further development of ECRIS. The RRS remained active until the Present, whilst the southern branch of ECRIS aborted in the early Miocene. Extensional strain across ECRIS amounts to some 7 km. Plume-related thermal thinning of the lithosphere underlies uplift of the Rhenish Massif and Massif Central. Lithospheric folding controlled uplift of the Vosges-Black Forest Arch. 相似文献
14.
郯庐断裂带对鲁西隆升过程的影响:磷灰石裂变径迹证据 总被引：3，自引：1，他引：2
郯庐断裂带(TLFZ)是一条贯穿华北的NNE向巨型断裂带。新生代以来,在郯庐断裂带的两侧及其内部发生了显著的伸展构造变形,形成了泰安-莱芜-蒙阴NW向断陷盆地群,并使鲁西块体发生了急剧的陆内伸展隆升。本文在前人研究的基础上,分别在鲁西沂山、徂徕山和蒙山三处进行了大量的样品采集,总计完成了25个样品的测试,获得了一系列新的磷灰石裂变径迹(AFT)年代学结果。结合前人已发表的裂变径迹结果,对鲁西地区新生代与伸展变形有关的剥露-隆升作用的时空分布特征、隆升剥露模式及隆升幅度进行分析,并揭示郯庐断裂带在鲁西新生代热隆升过程中的影响。主要认识有:1)新生代以来,鲁西主要经历了始新世-早渐新世和新近纪以来两期快速剥露-隆升阶段。2)始新世-早渐新世主要表现为幕式差异性快速剥露-隆升,鲁西南受NW向断层控制形成向北、向东的掀斜抬升作用,鲁西北受NE向断裂控制,形成向北、向西的掀斜抬升作用。新近纪以来,进入相对低速区域性剥露-隆升阶段。3)AFT模拟显示,与始新世-早渐新世的幕式快速剥露-隆升相比,中新世以来,鲁西剥露-隆升速率相对减小,但剥蚀量剥露-抬升量较大。故鲁西整体抬升于中新世以来。4)结合前人研究成果,新生代以来,鲁西宏观上受郯庐断裂带伸展活动影响,越靠近郯庐断裂带剥蚀量越大,局部受NW或NE向断裂控制。 相似文献
15.
祁连山东北部为青藏高原隆升和东扩的前锋带,新生代以来经历了快速隆升和强烈剥露改造过程,致使前新生代地层面目全非,中生代陆内构造演化事件研究仍较薄弱,缺乏年代学的约束.为揭示和分析祁连山东部中生代构造隆升时限与过程,进而探讨秦祁造山带中生代陆内构造演化特点及区域动力学环境.主要采用物源分析、碎屑沉积物及基岩磷灰石裂变径迹定年,并结合裂变径迹热史反演模拟技术开展研究.研究表明,研究区侏罗系龙凤山组为近源的断陷盆地沉积,物源主要来自其周邻前中生代地层;其碎屑磷灰石裂变径迹未发生重置,年龄、径迹长度特征表明其源区在晚三叠世（±215 Ma）出现了快速冷却事件,同时东北部基岩裂变径迹热史模拟结果亦显示其较好地记录了该期事件,这与前人利用40Ar-39Ar年代学所揭示的西秦岭地区中晚三叠世快速抬升事件具时空统一性.分析表明研究区晚三叠世-早侏罗世发生了快速抬升事件,并认为该构造隆升事件是对中晚三叠世勉略洋闭合、秦岭最终碰撞造山过程的响应. 相似文献
16.
Ana-Voica Bojar Harald Fritz Sabine Kargl Wolfgang Unzog 《Journal of African Earth Sciences》2002,34(3-4)
To constrain the post-Pan-African evolution of the Arabian–Nubian Shield, macro-scale tectonic studies, paleostress and fission track data were performed in the Eastern Desert of Egypt. The results provide insights into the processes driving late stage vertical motion and the timing of exhumation of a large shield area. Results of apatite, zircon and sphene fission track analyses from the Neoproterozoic basement indicate two major episodes of exhumation. Sphene and zircon fission track data range from 339 to 410 Ma and from 315 to 366 Ma, respectively. The data are interpreted to represent an intraplate thermotectonic episode during the Late Devonian–Early Carboniferous. At that time, the intraplate stresses responsible for deformation, uplift and erosion, were induced by the collision of Gondwana with Laurussia which started in Late Devonian times. Apatite fission track data indicate that the second cooling phase started in Oligocene and was related to extension, flank uplift and erosion along the actual margin of the Red Sea. Structural data collected from Neoproterozoic basement, Late Cretaceous and Tertiary sedimentary cover suggest two stages of rift formation. (1) Cretaceous strike-slip tectonics with sub-horizontal σ1 (ENE/WSW) and σ3 (NNW/SSE), and sub-vertical σ2 resulted in formation of small pull-apart basins. Basin axes are parallel to the trend of Pan-African structural elements which acted as stress guides. (2) During Oligocene to Miocene the stress field changed towards horizontal NE–SW extension (σ3), and sub-vertical σ1. Relations between structures, depositional ages of sediments and apatite fission track data indicate that the initiation of rift flank uplift, erosion and plate deformation occurred nearly simultaneously. 相似文献
17.
Predictions from dynamic modelling of the lithospheric deformation are presented for Northern Europe, where several basins underwent inversion during the Late Cretaceous and Early Cenozoic and contemporary uplift and erosion of sediments occurred. In order to analyse the evolution of the continental lithosphere, the equations for the deformation of a continuum are solved numerically under thin sheet assumption for the lithosphere. The most important stress sources are assumed to be the Late Cretaceous Alpine tectonics; localized rheological heterogeneities can also affect local deformation and stress patterns. Present-day observations available in the studied region and coming from seismic structural interpretations and stress measurements have been used to constrain the model. Our modelling results show that lateral variation in lithospheric strength below the basin systems in Central Europe strongly controls the regional deformation and the stress regime. Furthermore, we have demonstrated that the geometry of the boundary between Baltica and Avalonia, together with different rheological characteristics of the two plates, had a crucial role on local crustal deformation and faulting regime resulting in the Baltica–Avalonia transition zone from the S–N Alpine convergence. 相似文献
18.
东海盆地处于西太平洋俯冲带前缘,是发育在华南克拉通基底之上的,以晚白垩世-新生代沉积为主的新生代盆地.东海盆地性质是在活动大陆边缘减薄陆壳之上的,由于洋-陆俯冲消减所引起的张裂、拉伸作用而形成的弧后裂谷型盆地,是西太平洋众多“沟-弧-盆”体系的一部分.东海盆地陆架外缘隆起控制着东海盆地的演化过程,该地质单元形成于晚白垩世,是陆缘隆起和增生楔的复合体,中新世后由于菲律宾海板块的活动而解体为现今的钓鱼岛隆褶带和琉球隆起.结合对陆架外缘隆起的研究后认为,东海盆地晚白垩世以来的演化历程具有3大构造阶段,即:第一阶段,古新世-中始新世西部坳陷形成发展期;第二阶段,中始新世-渐新世东部坳陷形成发展期,其中,中晚始新世太平洋板块的转向是东、西部坳陷构造迁移的分界点;第三阶段,中新世-全新世,东海盆地进入到菲律宾板块影响时期,原先的构造格局开始分解. 相似文献
19.
宁武盆地及周缘岩体的抬升剥蚀对于山西地块中—新生代构造演化具有重要的指示意义。本文对宁武盆地及周缘岩体进行裂变径迹分析,磷灰石裂变径迹年龄97～47 Ma,锆石裂变径迹年龄161～141 Ma。裂变径迹记录了早白垩世早期(145～125 Ma)、晚白垩世(85～70 Ma)、古新世晚期—始新世早期(59～53 Ma)和渐新世晚期(28 Ma)的4次抬升剥蚀事件。综合分析山西地块的裂变径迹数据,表明隆起区晚古生代以来发生了多期抬升剥蚀事件。山西地块中—新生代构造演化具有时空差异。周缘岩体样品的裂变径迹年龄大于盆地内沉积地层样品的年龄,指示了周缘山体先于盆地抬升剥蚀。晋东北抬升剥蚀时限早于晋西南。山西裂谷系西南端裂开较早。裂谷系发育具有由南向北扩展的特征,这与地层保留记录相一致。山西地块现今地貌格局是在中生代发育一系列雁行状排列的复背斜和复向斜构造基础上发展而成的。 相似文献
20.
循化-化隆盆地新生代沉积及盆地基底和周缘山系磷灰石裂变径迹年代学分析揭示了青藏高原东北缘晚白垩世以来经历过3期隆升剥露事件: (1)盆地基底及拉脊山和西秦岭北缘构造带磷灰石裂变径迹年龄分析普遍记录了晚白垩世-始新世中期相对快速的区域性的隆升剥露事件, 西秦岭北缘快速抬升的起始时间为84Ma, 受控于向北的逆冲抬升; 向北到循化-化隆盆地中部的拉目峡抬升的起始时间为69Ma; 更北的拉脊山一带快速抬升期主要为40~50Ma, 从而反映晚白垩世-始新世中期的快速抬升由南向北逐渐扩展.这一期构造隆升事件导致循化-化隆盆地和临夏盆地缺失了北部西宁-民和盆地古近纪所具有的西宁群沉积.隆升剥露结束于31Ma左右, 此时化隆-循化盆地向东与同时期的临夏盆地相连为一个统一的大型西秦岭山前盆地, 两者具有相同的构造、沉积演化史, 因此循化-化隆盆地他拉组底部地层年龄最老不会超过临夏盆地最老地层的古地磁年龄, 即29Ma.(2)渐新世晚期约26Ma拉脊山开始双向逆冲隆升, 并可能延续到中新世早期约21Ma, 隆升作用使循化-化隆盆地成为挟持于拉脊山逆冲带和西秦岭构造带之间的山前挤压型前陆盆地, 循化-化隆盆地开始大规模沉积巨厚的他拉组冲积扇相粗碎屑岩.(3)通过循化-化隆盆地咸水河组和临夏组的沉积相分析、古流方向和砾石成分分析, 揭示出拉脊山构造带在中新世8Ma左右发生的最大规模的双向逆冲隆升事件, 这次事件直接导致循化-化隆盆地由前陆挤压盆地转变为山间盆地, 形成现今青藏高原东北缘的盆山地貌基本格局. 相似文献