首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 517 毫秒
1.
I. Pat-El 《Icarus》2009,201(1):406-411
From recent close encounters with Comets Wild-2 and Tempel 1 we learned that their surfaces are very rugged and no simple uniform layers model can be applied to them. Rather, a glaciological approach should be applied for describing their surface features and behavior. Such intrinsically rugged surface is formed in our large scale experiments, where an agglomerate of ∼200 μm gas-laden amorphous ice particles is accumulated to form a 20 cm diameter and few cm high ice sample. The density, tensile strength and thermal inertia of our ice sample were found to be very close to those found by Deep Impact for Comet Tempel 1: density 250-300 kg m−3 vs DI 350-400 kg m−3; tensile strength 2-4 kPa vs DI 1-10 kPa; thermal inertia 80 W K−1 m−2 s1/2 vs <100 W K−1 m−2 s1/2 and <50 W K−1 m−2 s1/2. From the close agreement between the thermal inertias measured in our ice sample, which had no dust coverage and that of Comet Tempel 1, we deduce that the low thermal inertia is an intrinsic property of the fluffy structure of the ice as a result of its low density, with an addition by the broken terrain and not due to the formation of a dust layer. Upon warming up of the ice, water vapor migrates both outward into the coma and inward. Reaching cooler layers, the water vapor condenses, forming a denser ice crust, as we show experimentally. We also demonstrate the inward and outward flow of water vapor in the outer ice layers through the exchange between layers of D2O ice and H2O ice, to form HDO.  相似文献   

2.
The Deep Impact (DI) spacecraft encountered Comet 9P/Tempel 1 on July 4th, 2005 and observed it with several instruments. In particular, we obtained infrared spectra of the nucleus with the HRI-IR spectrometer in the wavelength range of 1.0-4.9 μm. The data were taken before impact, with a maximum resolution of ∼120 m per pixel at the time of observation. From these spectra, we derived the first directly observed temperature map of a comet nucleus. The surface temperature varied from 272±7 to 336±7 K on the sunlit hemisphere, matching the surface topography and incidence angle. The derived thermal inertia is low, most probably <50 W K−1 m−2 s1/2. Combined with other arguments, it is consistent with the idea that most of rapidly varying thermal physical processes, in particular the sublimation of volatiles around perihelion, should occur close to the surface. Thermal inertia is sufficient to explain the temperature map of the nucleus of Comet Tempel 1 to first order, but other physical processes like roughness and self-radiation are required to explain the details of the temperature map. Finally, we evaluated that the Standard Thermal Model is a good approximation to derive the effective radius of a cometary nucleus with an uncertainty lower than ∼10% if combined with a thermal infrared light curve.  相似文献   

3.
In this paper we analyze near-infrared thermal emission spectra of the spatially resolved nucleus of Comet 9P/Tempel 1 obtained by the NASA spacecraft Deep Impact. Maps of spectral reddening, the product X′ between the beaming function and directional emissivity, as well as surface temperature are constructed. Thermophysical modeling is used to estimate the degree of small scale surface roughness and thermal inertia by detailed reproduction of the empirical temperature map. Mie and Hapke theories are used in combination with numerically calculated beaming functions to analyze the X′ map and place constraints on composition and grain size of the surface material. We show that it is absolutely mandatory to include small scale surface roughness in thermophysical modeling of this object, since the resulting self heating is vital for reproducing the measured temperatures. A small scale self heating parameter in the range 0.6?ξ?0.75 is common, but smoother areas where 0.2?ξ?0.3 are also found. Contrary to models neglecting small scale surface roughness, we find that the thermal inertia of Comet 9P/Tempel 1 generally is high (1000-3000 J m−2 K−1 s−1/2), although it may be substantially lower (40-380 J m−2 K−1 s−1/2) in specific areas. We obtain a disk-averaged reddening of 3.5% kÅ−1, with statistically significant local variations around that value on a ±1.0% kÅ−1 level. Vast regions appear covered by small (∼0.1 μm) highly absorbing grains such as carbon or iron-rich silicates. Other regions appear dominated by somewhat larger (∼0.5 μm) and/or less absorbing grains such as troilite or magnesium-rich silicates. Surface variations in reddening, roughness, thermal inertia, composition and/or grain size are moderately to strongly correlated to the locations of morphological units on the surface. The existence of morphological units with differing physical properties may be primordial, hence reflecting a diversity in the building block cometesimals, or resulting from evolutionary processes.  相似文献   

4.
Our work was inspired by the recent brightening of Comet 17P/Holmes. The recently observed increase in brightness of this comet was correlated with emission of dust, probably larger in mass than the dust mantle of the nucleus. We analyzed the hypothesis that the comet can eject a large mass of dust due to non-uniform crystallization of amorphous water ice. For this purpose, we simulated the evolution of a model nucleus on the orbit of Comet 17P/Holmes. The nucleus is composed of water ice and dust and has the shape of an elongated ellipsoid. The simulations include crystallization of amorphous ice in the nucleus, changes in the dust mantle thickness, and changes in the nucleus orientation in space. Our computations indicate that: (i) ejection of the dust cover triggers crystallization of ice independently on the material properties of the nucleus; (ii) moderate changes in the nucleus orientation (∼50°) may result in an acceleration of the crystallization of ice in the northern hemisphere, while a rather large change in the orientation (∼120°) is needed to cause a significant jump of the crystallization front in the southern hemisphere, where the emission of dust during the recent brightening was strongest. We investigated the possible reason for an explosion and we have found that the crystallization of the water ice itself is probably not sufficient.  相似文献   

5.
We present an analysis of the observations of the Deep Impact event performed by the OSIRIS narrow angle camera aboard the Rosetta spacecraft over two weeks, in an effort to characterize the cometary dust grains ejected from the nucleus of Comet 9P/Tempel 1. We adopt a Monte Carlo approach to generate calibrated synthetic images, and a linear combination of them is fitted to the calibrated images so as to determine the physical parameters of the dust cloud. Our model considers spherical olivine particles with a density of 3780 kg m−3. It incorporates constraints on the direction of the cone of emission coming from additional images obtained at Pic du Midi observatory, and constraints on the dust terminal velocities coming from the physics of the impact. We find that the slope of the differential dust size distribution of grains with radii <20 μm (β>0.008) is 3.1±0.3, a value typical of cometary dust tails. This shows that there is no evidence in our data for an enhancement in sub-micron particles in the ejecta compared to the typical dust distribution of active comets. We estimate the mass of particles with radii <1.4 μm (β>0.14) to be 1.5±0.2×105 kg. These particles represent more than 80% of the cross-section of the observed dust cloud. The mass carried by larger particles depends whether the gas significantly increases the kinetic energy of the grains in the inner coma; it lies in the range 1-14×106 kg for particles with radii <100 μm (β>0.002). We obtain the distribution of terminal velocities reached by the dust after the dust-gas interaction which is very well constrained between 10 and 600 m s−1. It is characterized by Gaussian with a maximum at about 190 m s−1 and a width at half maximum of 150 m s−1.  相似文献   

6.
This work is a continuation of our previous paper about brightening of Comet 17P/Holmes (Kossacki, K.J., Szutowicz, S. [2010]. Icarus 207, 320–340). In that paper we presented results of simulations indicating that the nonuniform crystallization of amorphous water ice itself is probably not sufficient for an explosion. In the present work we investigate the possibility that the explosion is caused by a rapid sublimation of the CO ice leading to the rise of gas pressure above the tensile strength of the nucleus. We simulated evolution of a model nucleus in the orbit of Comet 17P/Holmes. The nucleus is composed of water ice, carbon monoxide ice and dust and has the shape of an elongated ellipsoid. The simulations include crystallization of amorphous ice in the nucleus, changes of the dust mantle thickness, and sublimation of the CO ice. In our model CO is mantling grains composed of dust and amorphous water ice. Orientation of the nuclear spin axis in space is the same as derived in Moreno et al. (Moreno, F., Ortiz, J.L., Santos-Sanz, P., Morales, N., Vidal-Nunez, M.J., Lara, L.M., Gutierrez, P.J. [2008]. Astrophys. J. 677, L63–L66) for Comet Holmes during recent brightening event. Hence, the angle between the orbital and the equatorial planes of the comet is I = 95°, and the cometocentric solar longitude at perihelion is Φ = 210°. The calculations are performed for the south pole being the sub-solar point close to time of the outburst. Our computations indicate, that the CO pressure within the comet nucleus can rise to high values. When the layer between the dust mantle and the crystallization front of the amorphous water ice is very fine grained, few microns in radius, the CO pressure within the nucleus can exceed 10 kPa. This value is the lowest estimate for the tensile strength of the nucleus of Comet Holmes (Reach, W.T., Vaubaillon, J., Lisse, C.M., Holloway, M., Rho, J. [2010]. Icarus 208, 276–292). Hence, when the gas pressure reaches this value the nucleus may explode.  相似文献   

7.
Thermal inertia derivation techniques generally assume that surface properties are uniform at horizontal scales below the footprint of the observing instrument and to depths of several decimeters. Consequently, surfaces with horizontal or vertical heterogeneity may yield apparent thermal inertia which varies with time of day and season. To investigate these temporal variations, we processed three Mars years of Mars Global Surveyor Thermal Emission Spectrometer observations and produced global nightside and dayside seasonal maps of apparent thermal inertia. These maps show broad regions with diurnal and seasonal differences up to 200 J m−2 K−1s−1/2 at mid-latitudes (60° S to 60° N) and 600 J m−2 K−1s−1/2 or greater in the polar regions. We compared the seasonal mapping results with modeled apparent thermal inertia and created new maps of surface heterogeneity at 5° resolution, delineating regions that have thermal characteristics consistent with horizontal mixtures or layers of two materials. The thermal behavior of most regions on Mars appears to be dominated by layering, with upper layers of higher thermal inertia (e.g., duricrusts or desert pavements over fines) prevailing in mid-latitudes and upper layers of lower thermal inertia (e.g., dust-covered rock, soils with an ice table at shallow depths) prevailing in polar regions. Less common are regions dominated by horizontal mixtures, such as those containing differing proportions of rocks, sand, dust, and duricrust or surfaces with divergent local slopes. Other regions show thermal behavior that is more complex and not well-represented by two-component surface models. These results have important implications for Mars surface geology, climate modeling, landing-site selection, and other endeavors that employ thermal inertia as a tool for characterizing surface properties.  相似文献   

8.
We present an overview of the dust coma observations of Comet Tempel 1 that were obtained during the approach and encounter phases of the Deep Impact mission. We use these observations to set constraints on the pre-impact activity of the comet and discuss some preliminary results. The temporal and spatial changes that were observed during approach reveal three distinct jets rotating with a 1.7-day periodicity. The brightest jet produces an arcuate feature that expands outward with a projected velocity of about 12 m s−1, suggesting that the ambient dust coma is dominated by millimeter-sized dust grains. As the spatial resolution improves, more jets and fans are revealed. We use stereo pairs of high-resolution images to put some crude constraints on the source locations of some of the brightest features. We also present a number of interesting coma features that were observed, including surface jets detected at the limb of the nucleus when the exposed ice patches are passing over the horizon, and features that appear to be jets emanating from unilluminated sources near the negative pole. We also provide a list of 10 outbursts of various sizes that were observed in the near-continuous monitoring during the approach phase.  相似文献   

9.
Current methods for deriving thermal inertia from spacecraft observations of planetary brightness temperature generally assume that surface properties are uniform for any given observation or co-located set of observations. As a result of this assumption and the nonlinear relationship between temperature and thermal inertia, sub-pixel horizontal heterogeneity may yield different apparent thermal inertia at different times of day or seasons. We examine the effects of horizontal heterogeneity on Mars by modeling the thermal behavior of various idealized mixed surfaces containing differing proportions of either dust, sand, duricrust, and rock or slope facets at different angles and azimuths. Latitudinal effects on mixed-surface thermal behavior are also investigated. We find large (several 100 J m−2 K−1 s−1/2) diurnal and seasonal variations in apparent thermal inertia even for small (∼10%) admixtures of materials with moderately contrasting thermal properties or slope angles. Together with similar results for layered surfaces [Mellon, M.T., Putzig, N.E., 2007. Lunar Planet. Sci. XXXVIII. Abstract 2184], this work shows that the effects of heterogeneity on the thermal behavior of the martian surface are substantial and may be expected to result in large variations in apparent thermal inertia as derived from spacecraft instruments. While our results caution against the over-interpretation of thermal inertia taken from median or average maps or derived from single temperature measurements, they also suggest the possibility of using a suite of apparent thermal inertia values derived from single observations over a range of times of day and seasons to constrain the heterogeneity of the martian surface.  相似文献   

10.
We report on spectroscopic observations of periodic Comet 9P/Tempel 1 by the Alice ultraviolet spectrograph on the Rosetta spacecraft in conjunction with NASA's Deep Impact mission. Our objectives were to measure an increase in atomic and molecular emissions produced by the excavation of volatile sub-surface material. We unambiguously detected atomic oxygen emission from the quiescent coma but no enhancement at the 10% (1-σ) level following the impact. We derive a quiescent H2O production rate of 9×1027 molecules s−1 with an estimated uncertainty of ∼30%. Our upper limits to the volatiles produced by the impact are consistent with other estimates.  相似文献   

11.
We report high-spectral resolution observations of Comet 9P/Tempel 1 before, during and after the impact on 4 July 2005 UT of the Deep Impact spacecraft with the comet. These observations were obtained with the HIRES instrument on Keck 1. We observed brightening of both the dust and gas, but at different rates. We report the behavior of OH, NH, CN, C3, CH, NH2 and C2 gas. From our observations, we determined a CN outflow velocity of at least 0.51 km s−1. The dust color did not change substantially. To date, we see no new species in our spectra, nor do we see any evidence of prompt emission. From our observations, the interior material released by the impact looks the same as the material released from the surface by ambient cometary activity. However, further processing of the data may uncover subtle differences in the material that is released as well as the time evolution of this material.  相似文献   

12.
By considering model comet nuclei with a wide range of sizes, prolate ellipsoidal shapes, spin axis orientations, and surface activity patterns, constraints have been placed on the nucleus properties of the primary Rosetta target, Comet 67P/Churyumov-Gerasimenko. This is done by requiring that the model bodies simultaneously reproduce the empirical nucleus rotational lightcurve, the water production rate as function of time, and non-gravitational changes (per apparition) of the orbital period (ΔP), longitude of perihelion (Δ?), and longitude of the ascending node (ΔΩ). Two different thermophysical models are used in order to calculate the water production rate and non-gravitational force vector due to nucleus outgassing of the model objects. By requiring that the nominal water production rate measurements are reproduced as well as possible, we find that the semi-major axis of the nucleus is close to 2.5 km, the nucleus axis ratio is approximately 1.4, while the spin axis argument is either 60°±15° or 240°±15°. The spin axis obliquity can only be preliminarily constrained, indicating retrograde rotation for the first argument value, and prograde rotation for the second suggested spin axis argument. A nucleus bulk density in the range 100-370 kg m−3 is found for the nominal ΔP, while an upper limit of 500 kg m−3 can be placed if the uncertainty in ΔP is considered. Both considered thermophysical models yield the same spin axis, size, shape, and density estimates. Alternatively, if calculated water production rates within an envelope around the measured data are considered, it is no longer possible to constrain the size, shape, and spin axis orientation of the nucleus, but an upper limit on the nucleus bulk density of 600 kg m−3 is suggested.  相似文献   

13.
We suggest that the regions of smooth terrain which were observed on Comet 9P/Tempel 1 by the Deep Impact spacecraft were formed by blowing ice grains in an outburst of gas from the comet interior. When gas is released from 10 to 20 m deep layers which were heated to 135 K, it is released quiescently onto the surface by individual conduits. If large amounts of gas are released, the drainage system cannot release them fast enough and wider interconnected channels are formed, leading to sudden outburst of gas. Instability triggering a sudden shift of flow is well known in subglacial drainage of water. The ballistic trajectory of the ice particles reach a distance of 3 km in the atmosphereless comet, whose gravity is 0.034 cm s−1, if ejected at an angle of 45° at a speed of 95 cm s−1. This speed is close to the speeds measured in laboratory experiments: 167, 140×sini and 167 cm s−1, for particles of 0.3, 1000 and 14-650 μm, respectively. Blowing of ice grains can overcome the 1650 m long horizontal section of smooth terrain i1 (Fig. 1), whereas simple flow of material downhill would stop close to the foot of the hill. The ice particles at the end of their trajectory have a horizontal velocity component and this low velocity ballistic sedimentation would lead to formation of lineaments on the smooth terrain, like in solid-particulate volcanic eruptions.  相似文献   

14.
Clay mineral-bearing deposits previously discovered on Mars with near infrared (λ=0.3-5 μm) remote sensing data are of major significance for understanding the aqueous history, geological evolution, and past habitability of Mars. In this study, we analyzed the thermal infrared (λ=6-35 μm) surface properties of the most extensive phyllosilicate deposit on Mars: the Mawrth Vallis area. Clay mineral-bearing units, which in visible images appear to be relatively light-toned, layered bedrock, have thermal inertia values ranging from 150 to 460 J m−2 K−1 s−1/2. This suggests the deposits are composed of a mixture of rock with sand and dust at 100-meter scales. Dark-toned materials that mantle the clay-bearing surfaces have thermal inertia values ranging from 150 to 800, indicating variable degrees of rockiness or induration of this younger sedimentary or pyroclastic unit. Thermal Emission Spectrometer (TES) spectra of the light-toned rocks were analyzed with a number of techniques, but none of the results shows a large phyllosilicate component as has been detected in the same surfaces with near-infrared data. Instead, TES spectra of light-toned surfaces are best modeled by a combination of plagioclase feldspar, high-silica materials (similar to impure opaline silica or felsic glass), and zeolites. We propose three hypotheses for why the clay minerals are not apparent in thermal infrared data, including effects due to surface roughness, sub-pixel mixing of multiple surface temperatures, and low absolute mineral abundances combined with differences in spatial sampling between instruments. Zeolites modeled in TES spectra could be a previously unrecognized component of the alteration assemblage in the phyllosilicate-bearing rocks of the Mawrth Vallis area. TES spectral index mapping suggests that (Fe/Mg)-clays detected with near infrared data correspond to trioctahedral (Fe2+) clay minerals rather than nontronite-like clays. The average mineralogy and geologic context of these complex, interbedded deposits suggests they are either aqueous sedimentary rocks, altered pyroclastic deposits, or a combination of both.  相似文献   

15.
A fully 3-dimensional implicit numerical model for comet nucleus evolution is presented, emphasizing dust mantle formation. A spherical configuration is considered with an initial composition of amorphous H2O ice and dust, taking into account a discrete dust-grain size distribution. The model is applied to Comet 67P/Churyumov-Gerasimenko, adopting its orbital elements, rotation period and rotation axis inclination. We find that the dust mantle thickness varies over the surface from 1 cm to about 10 cm (thus lower and higher than the diurnal skin-depth, respectively). The size distribution of ejected grains varies along the orbit and is steeper than the initial one adopted for the nucleus. The crystallization front advances inward in spurts, and its depth varies between 1 and several meters. We test the effect of the thermal conductivity on the surface temperature distribution and depths of the dust mantle and crystallization front.  相似文献   

16.
M. Weiler  H. Rauer  J. Knollenberg 《Icarus》2007,190(2):423-431
The target of the Deep Impact space mission (NASA), Comet 9P/Tempel 1, was observed from two nights before impact to eight nights after impact using the FORS spectrographs at the ESO VLT UT1 and UT2 telescopes. Low resolution optical long-slit spectra were obtained to study the evolution of the gas coma around the Deep Impact event. Following first results of this observing campaign on the CN and dust activity [Rauer, H., Weiler, M., Sterken, C., Jehin, E., Knollenberg, J., Hainaut, O., 2006. Astron. Astrophys. 459, 257-263], this work presents a study of the complete dataset on CN, C2, C3, and NH2 activity of Comet 9P/Tempel 1. An extended impact gas cloud was observed moving radially outwards. No compositional differences between this impact cloud and the undisturbed coma were found as far as the observed radicals are concerned. The gas production rates before and well after impact indicate no change in the cometary activity on an intermediate time scale. Over the observing period, the activity of Comet 9P/Tempel 1 was found to be related to the rotation of the cometary nucleus. The rotational lightcurve for different gaseous species provides indications for compositional differences among different parts of the nucleus surface.  相似文献   

17.
An investigation of the activity of Comet C/1995 O1 (Hale-Bopp) with a thermophysical nucleus model that does not rely on the existence of amorphous ice is presented. Our approach incorporates recent observations allowing to constrain important parameters that control cometary activity. The model accounts for heat conduction, heat advection, gas diffusion, sublimation, and condensation in a porous ice-dust matrix with moving boundaries. Erosion due to surface sublimation of water ice leads to a moving boundary. The movement of the boundary is modeled by applying a temperature remapping technique which allows us to account for the loss in the internal energy of the eroded surface material. These kind of problems are commonly referred to as Stefan problems. The model takes into account the diurnal rotation of the nucleus and seasonal effects due to the strong obliquity of Hale-Bopp as reported by Jorda et al. (Jorda, L., Rembor, K., Lecacheux, J., Colom, P., Colas, F., Frappa, E., Lara, L.M. [1997]. Earth Moon Planets 77, 167-180). Only bulk sublimation of water and CO ice are considered without further assumptions such as amorphous ices with certain amount of occluded CO gas. Confined and localized activity patterns are investigated following the reports of Lederer and Campins (Lederer, S.M., Campins, H. [2002]. Earth Moon Planets 90, 381-389) about the chemical heterogeneity of Hale-Bopp and of Bockelée-Morvan et al. (Bockelée-Morvan, D., Henry, F., Biver, N., Boissier, J., Colom, P., Crovisier, J., Despois, D., Moreno, R., Wink, J. [2009]. Astron. Astrophys. 505, 825-843) about a strong CO source at a latitude of 20°. The best fit to the observations of Biver et al. (Biver, N. et al. [2002]. Earth Moon Planets 90, 5-14) is obtained with a low thermal conductivity of 0.01 W m−1 K−1. This is in agreement with recent results of the Deep Impact mission to 9P/Tempel 1 (Groussin, O., A’Hearn, M.F., Li, J.-Y., Thomas, P.C., Sunshine, J.M., Lisse, C.M., Meech, K.J., Farnham, T.L., Feaga, L.M., Delamere, W.A. [2007]. Icarus 187, 16-25) and with previous thermal simulations (Kührt, E. [1999]. Space Sci. Rev. 90, 75-82). The water production curve matches the production rates well from −4 AU pre-perihelion to the outgoing leg while the model does not reproduce so well the water production beyond 4 AU pre-perihelion. The CO production curve is a good fit to the measurements of Biver et al. (2002) over the whole measured heliocentric range from −7 AU pre- to 15 AU post-perihelion.  相似文献   

18.
We report the detection of Comet 67P/Churyumov-Gerasimenko's dust trail and nucleus in 24 μm Spitzer Space Telescope images taken February 2004. The dust trail is not found in optical Palomar images taken June 2003. Both the optical and infrared images show a distinct neck-line tail structure, offset from the projected orbit of the comet. We compare our observations to simulated images using a Monte Carlo approach and a dynamical model for comet dust. We estimate the trail to be at least one orbit old (6.6 years) and consist of particles of size ?100 μm. The neck-line is composed of similar sized particles, but younger in age. Together, our observations and simulations suggest grains 100 μm and larger in size dominate the total mass ejected from the comet. The radiometric effective radius of the nucleus is 1.87±0.08 km, derived from the Spitzer observation. The Rosetta spacecraft is expected to arrive at and orbit this comet in 2014. Assuming the trail is comprised solely of 1 mm radius grains, we compute a low probability (∼10−3) of a trail grain impacting with Rosetta during approach and orbit insertion.  相似文献   

19.
A class of comets, of which Comet Kohoutek (1973f) is typical, show total as well as monochromatic brightness asymmetries about perihelion. They are fainter after perihelion than before at the same heliocentric distance. A model of the cometary nucleus consisting of a growing non-volatile dust mantle surrounding a volatile icy core is used to discuss this phenomenon.Numerical results are obtained for Comet Kohoutek (1973f). It is found that dust mantles of thickness in the range of 10–75 cm can be grown by perihelion passage for various values of the thermal conductivity of the dust if there is no substantial dust blow-off by the sublimating volatiles.The thermal conductivity of the dust mantle is quite small and is dominated by radiative conductivity for heliocentric distances 2 AU. Since the radiative conductivity is larger for larger grain size, the thickest mantle corresponds to coarsest matrix.The strong insulation provided by the growing dust layer progressively suppresses the surface temperature of the volatile core below its quasi-equilibrium value had there been no mantle. As a consequence the production rate of the parent-molecules as well as the monochromatic brightness of their daughter products increases less steeply than in the mantleless case, as the comet approaches perihelion. Furthermore, there are significant monochromatic brightness asymmetries about perihelion, which are enhanced if there is a greater dust blow-off before perihelion than after, as is believed to be the case with Comet Kohoutek (1973f). Estimates of this asymmetry of 1 × 2 magnitudes for the OH brightness at a heliocentric distance × 1 AU are consistent with the rather limited observations.  相似文献   

20.
On 4 July 2005 at 5:52 UT the Deep Impact mission successfully completed its goal to hit the nucleus of 9P/Tempel 1 with an impactor, forming a crater on the nucleus and ejecting material into the coma of the comet. NASA's Submillimeter Wave Astronomy Satellite (SWAS) observed the 110-101 ortho-water ground-state rotational transition in Comet 9P/Tempel 1 before, during, and after the impact. No excess emission from the impact was detected by SWAS and we derive an upper limit of 1.8×107 kg on the water ice evaporated by the impact. However, the water production rate of the comet showed large natural variations of more than a factor of three during the weeks before and after the impact. Episodes of increased activity with alternated with periods with low outgassing (). We estimate that 9P/Tempel 1 vaporized a total of N∼4.5×1034 water molecules (∼1.3×109 kg) during June-September 2005. Our observations indicate that only a small fraction of the nucleus of Tempel 1 appears to be covered with active areas. Water vapor is expected to emanate predominantly from topographic features periodically facing the Sun as the comet rotates. We calculate that appreciable asymmetries of these features could lead to a spin-down or spin-up of the nucleus at observable rates.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号