首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到19条相似文献，搜索用时 203 毫秒
1.
The 1515 M7? Yongsheng earthquake is the strongest earthquake historically in northwest Yunnan. However, its time, magnitude and the seismogenic fault have long been a topic of dispute. In order to accurately define those problems, a 1:50000 active tectonic mapping was carried out along the northern segment of the Chenghai–Binchuan fault zone. The result shows that there is an at least 25 km–long surface rupture and a series of seismic landslides distributed along the Jinguan fault and the Chenghai fault. Radiocarbon dating of the ~(14) C samples indicates that the surface rupture should be a part of the deformation zone caused by the Yongsheng earthquake in the year 1515. The distribution characteristics of this surface rupture indicate that the macroscopic epicenter of the 1515 Yongsheng earthquake may be located near Hongshiya, and the seismogenic fault of this earthquake is the Jinguan–Chenghai fault, the northern part of the Chenghai–Binchuan fault zone. Striations on the surface rupture show that the latest motion of the fault is normal faulting. The maximum co–seismic vertical displacement can be 3.8 m, according to the empirical formula for the fault displacement and moment magnitude relationship, the moment magnitude of the Yongsheng earthquake was Mw 7.3–7.4. Furthermore, combining published age data with the ~(14) C data in this paper reveals that at least four large earthquakes of similar size to the 1515 Yongsheng earthquake, have taken place across the northern segment of the Chenghai–Binchuan fault zone since 17190±50 yr. BP. The in–situ recurrence interval of Mw 7.3–7.4 characteristic earthquakes in Yongsheng along this fault zone is possibly on the order of 6 ka.  相似文献   

2.
At 08:02 on April 20, 2013, a Ms7.0 earthquake occurred in Lushan, Ya'an, in the Longmenshan fault zone, Sichuan. The epicenter was located between Taiping Town and Shuangshi Town, Lushan County and the maximum earthquake intensity at the epicenter reached class IX. Field investigations in the epicenter area found that, although buildings were seriously damaged, no obvious surface rupture structure was produced, only some ground fissures and sand blows and water ejection phenomena being seen. An integrated analysis of high-resolution remote sensing image interpretation, mainshock and aftershock distribution, and focal mechanism solutions indicated that this earthquake was an independent rupturing event in the southwestern segment of the Longmenshan fault zone, belonging to the thrust-type earthquake. Ruptures occurred along the south-central segment of the Shuangshi-Dachuan fault and the principal rupture plane dipped SW at 33-43°. It is inferred that the Lushan earthquake might be related to the ramp activity of the basal detachment zone (13-19 km) of the Longmenshan fault zone. Historically, there occurred at least two Ms6-6.5 earthquakes along the Shuangshi-Dachuan fault zone; thus it is thought that the Lushan earthquake, different from the Wenchuan earthquake, was a characteristic one in the southwestern segment of the Longmenshan fault zone. In-situ stress measurements indicated the Lushan earthquake was the result of stress release of the southwestern segment of the Longmenshan fault zone after the Wenchuan earthquake. This paper analyzes the tectonic setting of the seismogenic structure of this earthquake.  相似文献   

3.
Abstract: This paper examines major active faults and the present-day tectonic stress field in the East Tibetan Plateau by integrating available data from published literature and proposes a block kinematics model of the region. It shows that the East Tibetan Plateau is dominated by strike-slip and reverse faulting stress regimes and that the maximum horizontal stress is roughly consistent with the contemporary velocity field, except for the west Qinling range where it parallels the striking of the major strike-slip faults. Active tectonics in the East Tibetan Plateau is characterized by three faulting systems. The left-slip Kunlun-Qinling faulting system combines the east Kunlun fault zone, sinistral oblique reverse faults along the Minshan range and two major NEE-striking faults cutting the west Qinling range, which accommodates eastward motion, at 10–14 mm/a, of the Chuan-Qing block. The left-slip Xianshuihe faulting system accommodated clockwise rotation of the Chuan-Dian block. The Longmenshan thrust faulting system forms the eastern margin of the East Tibetan Plateau and has been propagated to the SW of the Sichuan basin. Crustal shortening across the Longmenshan range seems low (2–4 mm/a) and absorbed only a small part of the eastward motion of the Chuan-Qing block. Most of this eastward motion has been transmitted to South China, which is moving SEE-ward at 7–9 mm/a. It is suggested from geophysical data interpretation that the crust and lithosphere of the East Tibetan Plateau is considerably thickened and rheologically layered. The upper crust seems to be decoupled from the lower crust through a décollement zone at a depth of 15–20 km, which involved the Longmenshan fault belt and propagated eastward to the SW of the Sichuan basin. The Wenchuan earthquake was just formed at the bifurcated point of this décollement system. A rheological boundary should exist beneath the Longmenshan fault belt where the lower crust of the East Tibetan Plateau and the lithospheric mantle of the Yangze block are juxtaposed.  相似文献   

4.
The variation of in situ stress before and after earthquakes is an issue studied by geologists. In this paper, on the basis of the fault slip dislocation model of Wenchuan Ms8.0 earthquake, the changes of co-seismic displacement and the distribution functions of stress tensor around the Longmen Shan fault zone are calculated. The results show that the co-seismic maximum surface displacement is 4.9 m in the horizontal direction and 6.5 m in the vertical direction, which is almost consistent with the on-site survey and GPS observations. The co-seismic maximum horizontal stress in the hanging wall and footwall decreased sharply as the distance from the Longmen Shan fault zone increased. However, the vertical stress and minimum horizontal stress increased in the footwall and in some areas of the hanging wall. The study of the co-seismic displacement and stress was mainly focused on the long and narrow region along the Longmen Shan fault zone, which coincides with the distribution of the earthquake aftershocks. Therefore, the co-seismic stress only affects the aftershocks, and does not affect distant faults and seismic activities. The results are almost consistent with in situ stress measurements at the two sites before and after Wenchuan Ms8.0 earthquake. Along the fault plane, the co-seismic shear stress in the dip direction is larger than that in the strike direction, which indicates that the faulting mechanism of the Longmen Shan fault zone is a dominant thrust with minor strike-slipping. The results can be used as a reference value for future studies of earthquake mechanisms.  相似文献   

5.
The Changle-Zhao' an fault belt is an important belt bordering the southeast coast of China. It wasformed in pre-Mesozoic time and has undergone polyphase activities of different modes ever since. Through astudy of the data concerning the Cenozoic strata, volcanism. seismicity, hydrothermal activity and crustaldeformation, the characteristics of the neotectonic movement of this fault belt were preliminarily ascertained,the amplitudes and rates of recent faulting in some places were calculated, and the intensities of the activities invarious structural basins along the fault zone were compared. Besides, this paper also discusses the main causefor the origin of the Quanzhou-Shantou strong earthquake tectonic zone.  相似文献   

6.
Abstract: Four months after the Wenchuan Ms 8 earthquake in western Sichuan, China, in situ stress measurements were carried out along the Longmenshan fault zone with the purpose of obtaining stress parameters for earthquake hazard assessment. In-situ stresses were measured in three new boreholes by using overcoring with the piezomagnetic stress gauges for shallow depths and hydraulic fracturing for lower depths. The maximum horizontal stress in shallow depths (~20 m) is about 4.3 MPa, oriented N19°E, in the epicenter area at Yingxiu Town, about 9.7 MPa, oriented N51°W, at Baoxing County in the southwestern Longmenshan range, and about 2.6 MPa, oriented N39°E, near Kangding in the southernmost zone of the Longmenshan range. Hydraulic fracturing at borehole depths from 100 to 400 m shows a tendency towards increasing stress with depth. A comparison with the results measured before the Wenchuan earthquake along the Longmenshan zone and in the Tibetan Plateau demonstrates that the stress level remains relatively high in the southwestern segment of the Longmenshan range, and is still moderate in the epicenter zone. These results provide a key appraisal for future assessment of earthquake hazards of the Longmenshan fault zone and the aftershock occurrences of the Wenchuan earthquake.  相似文献   

7.
This article is to review results from scientific drilling and fault-zone trapped waves(FZTWs) at the south Longman-Shan fault(LSF) zone that ruptured in the 2008 May 12 M8 Wenchuan earthquake in Sichuan, China. Immediately after the mainshock, two Wenchuan Fault Scientific Drilling(WFSD) boreholes were drilled at WFSD-1 and WFSD-2 sites approximately 400 m and 1 km west of the surface rupture along the Yinxiu-Beichuan fault(YBF), the middle fault strand of the south LSF zone. Two boreholes met the principal slip of Wenchuan earthquake along the YBF at depths of 589-m and 1230-m, respectively. The slip is accompanied with a 100-200-m-wide zone consisting of fault gouge, breccia, cataclasite and fractures. Close to WFSD-1 site, the nearly-vertical slip of ~4.3-m with a 190-m wide zone of highly fractured rocks restricted to the hanging wall of the YBF was found at the ground surface after the Wenchuan earthquake. A dense linear seismic array was deployed across the surface rupture at this venue to record FZTWs generated by aftershocks. Observations and 3-D finite-difference simulations of FZTWs recorded at this cross-fault array and network stations close to the YBF show a distinct low-velocity zone composed by severely damaged rocks along the south LSF at seismogenic depths. The zone is several hundred meters wide along the principal slip, within which seismic velocities are reduced by ~30–55% from wall-rock velocities and with the maximum velocity reduction in the ~200-m-wide rupture core zone at shallow depth. The FZTW-inferred geometry and physical properties of the south LSF rupture zone at shallow depth are in general consistent with the results from petrological and structural analyses of cores and well log at WFSD boreholes. We interpret this remarkable low-velocity zone as being a break-down zone during dynamic rupture in the 2008 M8 earthquake. We examined the FZTWS generated by similar earthquakes before and after the 2008 mainshock and observed that seismic velocities within fault core zone was reduced by ~10% due to severe damage of fault rocks during the M8 mainshock. Scientific drilling and locations of aftershocks generating prominent FZTWs also indicate rupture bifurcation along the YBF and the Anxian-Guangxian fault(AGF), two strands of the south LSF at shallow depth. A combination of seismic, petrologic and geologic study at the south LSF leads to further understand the relationship between the fault-zone structure and rupture dynamics, and the amplification of ground shaking strength along the low-velocity fault zone due to its waveguide effect.  相似文献   

8.
Abstract: There are two co-seismic faults which developed when the Wenchuan earthquake happened. One occurred along the active fault zone in the central Longmen Mts. and the other in the front of Longmen Mts. The length of which is more than 270 km and about 80 km respectively. The co-seismic fault shows a reverse flexure belt with strike of N45°–60°E in the ground, which caused uplift at its northwest side and subsidence at the southeast. The fault face dips to the northwest with a dip angle ranging from 50° to 60°. The vertical offset of the co-seismic fault ranges 2.5–3.0 m along the Yingxiu-Beichuan co-seismic fault, and 1.5–1.1 m along the Doujiangyan-Hanwang fault. Movement of the co-seismic fault presents obvious segmented features along the active fault zone in central Longmen Mts. For instance, in the section from Yingxiu to Leigu town, thrust without evident slip occurred; while from Beichuan to Qingchuan, thrust and dextral strike-slip take place. Main movement along the front Longmen Mts. shows thrust without slip and segmented features. The area of earthquake intensity more than IX degree and the distribution of secondary geological hazards occurred along the hanging wall of co-seismic faults, and were consistent with the area of aftershock, and its width is less than 40km from co-seismic faults in the hanging wall. The secondary geological hazards, collapses, landslides, debris flows et al., concentrated in the hanging wall of co-seismic fault within 0–20 km from co-seismic fault.  相似文献   

9.
Following the 2008 Wenchuan M8 earthquake,the seismic risk of the northeastern section of the Longmenshan fault zone and the adjacent Hanzhong basin has become an issue that receives much concern.It is facing,however,the problem of a lack of sufficient data because of little previous work in these regions.The northeastern section of the Longmenshan fault zone includes three major faults：the Qingchuan fault,Chaba-Lin＇ansi fault,and Liangshan south margin fault,with the Hanzhong basin at the northern end.This paper presents investigations of the geometry,motion nature,and activity ages of these three faults,and reveals that they are strike slip with normal faulting,with latest activity in the Late Pleistocene.It implies that this section of the Longmenshan fault zone has been in an extensional setting,probably associated with the influence of the Hanzhong basin.Through analysis of the tectonic relationship between the Longmenshan fault zone and the Hanzhong basin,this work verifies that the Qingchuan fault played an important role in the evolution of the Hanzhong basin,and further studies the evolution model of this basin.Finally,with consideration of the tectonic setting of the Longmenshan fault zone and the Hanzhong basin as well as seismicity of surrounding areas,this work suggests that this region has no tectonic conditions for great earthquakes and only potential strong events in the future.  相似文献   

10.
On April 20 th, 2013, an earthquake of magnitude MW 6.6 occurred at Lushan of Sichuan on the southern segment of the Longmenshan fault zone, with no typical coseismic surface rupture. This work plotted an isoseismal map of the earthquake after repositioning over 400 post–earthquake macro–damage survey points from peak ground acceleration(PGA) data recorded by the Sichuan Digital Strong Earthquake Network. This map indicates that the Lushan earthquake has a damage intensity of IX on the Liedu scale, and that the meizoseismal area displays an oblate ellipsoid shape, with its longitudinal axis in the NE direction. No obvious directivity was detected. Furthermore, the repositioning results of 3323 early aftershocks, seismic reflection profiles and focal mechanism solutions suggests that the major seismogenic structure of the earthquake was the Dayi Fault, which partly defines the eastern Mengshan Mountain. This earthquake resulted from the thrusting of the Dayi Fault, and caused shortening of the southern segment of the Longmenshan in the NW–SE direction. Coseismal rupture was also produced in the deep of the Xinkaidian Fault. Based on the above seismogenic model and the presentation of coseismic surface deformation, it is speculated that there is a risk of more major earthquakes occurring in this region.  相似文献   

11.
On 24 March 1970 an earthquake of magnitude ML 6.7 took place in the eastern Canning Basin. The earthquake was unusual because it occurred in a region where no previous earthquake had been reported and where there was no evidence of recent tectonic activity. First motion results indicate a thrusting type focal mechanism with the pressure axis approximately northeast‐southwest and dipping about 24° to the southwest. The main shock was followed, over the next two years, by many earthquakes in a zone covering 140 km by 20 km. The longitudinal axis of this zone is approximately parallel to the north‐northwest striking nodal plane determined from the first motion results, and to the trend of intrabasin faulting.

It is suggested that continental crust may be sensitive to small changes in stress pattern and consequently seismic activity may be interrelated over large distances.  相似文献   

12.
四川芦山2013年Ms7.0地震发震构造初步研究   总被引：3，自引：0，他引：3  
2013年4月20日8时2分,四川龙门山断裂带的雅安芦山发生Ms7.0级地震,震中位于芦山县太平镇和双石镇之间,震源深度13～14km,震中最大烈度达IX级。震中区野外调查发现,尽管房屋建筑损坏较严重,但这次地震没有产生明显的地表破裂构造,仅见少量的地裂缝和喷砂冒水现象。高分辨率遥感图像解译、主余震分布、震源机制解等综合分析认为,该地震是龙门山断裂带西南段一次独立的破裂事件,属于逆冲型地震,沿双石-大川断裂中南段发生破裂,主破裂面西倾,倾角33°～43°,推断芦山地震与龙门山构造带底部滑脱带(13～19km)断坡构造活动有关。历史上,沿双石-大川断裂发生至少2次Ms6～6.5级地震,由此认为芦山地震是龙门山断裂带西南段特征型地震,与汶川地震不同。原地地应力测量和监测数据表明这是汶川地震后龙门山断裂带西南段应力释放的结果。  相似文献   

13.
A major earthquake occurred in the Straits of Messina in Southern Italy on December 28, 1908. The shock became known in literature as the “Messina earthquake”. The present paper deals mainly with a re-interpretation of the source mechanism of this shock using modern interpretation techniques. The following parameters are discussed: Epicentre, hypocentre, origin-time, macroseismic intensity, body and surface wave magnitudes, fault-plane solution, seismic moments derived from body and surface waves, residual displacements and tsunami values.The parameters are compared with the tectonic setting of Southern Italy. As a result of the large magnitude (M = 7) and the 30 km long fault extension of this shock, the Messina earthquake reflects the large scale tectonics of Southern Italy more significantly than any other earthquake from which seismograms exist. The focal mechanism studies show a good agreement between the orientation of the shear-plane of the earthquake and the tectonic features of a fault-line which is known from geological data, the so-called Comiso-Catania-Messina-S. Eufemia fault. The rupture of the shallow earthquake was associated with normal faulting. According to the normal faulting mechanism, the earthquake resulted from tensional forces acting approximately perpendicular to the strike direction of the Straits of Messina.Geodetic measurements which were performed shortly before and after the earthquake indicate an apparent asymmetry in the volumes of uplift and subsidence. It is suggestive that there exists a strong net subsidence of material displaced with the earthquake faulting. The normal faulting mechanism of the Messina earthquake is in tectonic accordance with the uprise of olivine basalt in the volcanism observed at Etna. However, the normal faulting is contrary to the postulation of a subducting oceanic plate giving rise to the Calabrian-Sicilian arc-like feature, as this hypothesis would require mainly a compressional zone in the region of the Straits of Messina.  相似文献   

14.
The 1988 Tennant Creek,northern territory,earthquakes: A synthesis   总被引：2，自引：0，他引：2  

Three large earthquakes with surface‐wave magnitudes 6.3–6.7 on 22 January 1988 were associated with 32 km of surface faulting on two main scarps 30 km southwest of Tennant Creek in the Northern Territory. These events provide an excellent opportunity to study the mechanics of midplate earthquakes because of the abundance of geological and geophysical data in the area, the proximity of the Warramunga seismic array and the ease of access to the fault zone. The 1988 earthquakes were located in the North Australian Craton in an area that had no history of moderate or large earthquakes before 1986. Additionally, no smaller earthquakes from the fault zone were identified at the Warramunga array, which is situated only 30 km from the nearest scarp, between the 1965 installation of the array and 1986. The main shocks were preceded by a swarm of moderatesized (magnitude 4–5) earthquakes in January 1987 and many smaller aftershocks throughout 1987. Careful relocation of all teleseismically recorded earthquakes from the fault zone shows that the 1987 activity was concentrated in an area only 6 km across in the gap between the two main fault scarps. The main shocks also nucleated in the centre of the fault zone near the 1987 activity. Field observations of scarp morphology indicate that the scarp is divided into three segments, each showing primarily reverse faulting. However, whereas the western and eastern segments show movement of the southern block over the northern, the central scarp segment shows the opposite, with the northern block thrust over the southern block.

Analysis of the first arrival times at Warramunga suggests that the three main shocks were associated with the western, central and eastern scarp segments, respectively. The locations of aftershocks determined using data from temporary seismograph arrays in the epicentral area define three inclined zones of activity that are interpreted as fault planes. In the western and eastern portions of the aftershock zone, these concentrations of activity dip to the south at 45° and 35°, respectively, but in the central section the aftershock zone dips to the north at 55°. Focal mechanisms derived from modelling broadband teleseismic data show thrust and oblique thrust faulting for the three main shocks. The first event ruptured unilaterally up and to the northwest on the westernmost fault segment, while the third main shock ruptured horizontally to the southeast. Modelling of repeat levelling data from the epicentral area requires at least three distinct fault planes, with the eastern and western planes dipping to the south and the central plane dipping to the north. The combination of scarp morphology, aftershock distribution and elevation data makes a strong case for rupture of fault planes in conjugate orientation during the 22 January 1988 Tennant Creek earthquakes. More than 20000 aftershocks have been recorded at Warramunga and activity continues to the present‐day with occasional shocks felt in the town of Tennant Creek and some recent off‐fault aftershocks located directly under the Warramunga seismic array. Stratigraphic relationships exposed in trenches excavated across the scarps suggest that during the Quaternary, a large earthquake ruptured the surface along one segment of the 1988 scarps.  相似文献   

15.
The Olinghouse fault zone is one of several NE—ENE-trending fault zones and lineaments, including the Midas Trench and the Carson—Carson Sink Lineament, which exhibit left-lateral transcurrent movement conjugate to the Walker Lane in western Nevada. The active portion of this fault zone extends for approximately 23 km, from 16 km east of Reno, Nevada, to the southern extent of Pyramid Lake. The fault can be traced for most of its length from its geomorphic expression in the hilly terrain, and it is hidden only where overlain by recent alluvial sediments. Numerous features characteristic of strike-slip faulting can be observed along the fault, including: scarps, vegetation lines, sidehill and shutter ridges, sag ponds, offset stream channels and stone stripes, enclosed rhombohedral and wedge-shaped depressions, and en-echelon fractures.A shear zone having a maximum observable width of 1.3 km is defined principally by Riedel shears and their symmetrical P-shears, with secondary definition by deformed conjugate Riedel shears. Several continuous horizontal shears, or principal displacement shears, occupy the axial portion of the shear zone. The existence of P-shears and principal displacement shears suggests evolution of movement along the fault zone analogous to the “Post-Peak” or “Pre-Residual Structure” stage.Historic activity (1869) has established the seismic potential of this zone. Maximum intensities and plots of the isoseismals indicate the 1869 Olinghouse earthquake had a magnitude of 6.7. Field study indicates the active length of the fault zone is at least 23 km and the maximum 1869 displacement was 3.65 m of left-slip. From maximum fault length and maximum fault displacement to earthquake magnitude relations, this corresponds to an earthquake of about magnitude 7.  相似文献   

16.
Teleseismic and strong motion data are used to derive the source parameters of the September 9, 1998 Castelluccio earthquake (M5.6). Teleseismic body-wave modeling indicates normal faulting (Plane 1: strike = 328°, dip = 50°, rake = −75°; Plane 2: strike = 126°, dip = 42°, rake = −107°) along NW–SE striking planes. Both nodal planes of the computed focal mechanism are tested for their capability of reproducing the mainshock acceleration time histories at three strong motion stations. Synthetic accelerograms are estimated using the stochastic method for finite sources in combination with the H/V ratios technique for the incorporation of the site effect. Our preferred model, which provided the best fit between synthetic and observed waveforms and corresponding Fourier amplitude spectra, consists of a NE-dipping normal fault with dimensions 8 × 7 km. The rupture nucleation point, which is assumed to coincide with the hypocenter location, was confined to the southeasternmost, deepest part of the fault. Our results are in good agreement with the so far released information regarding the aftershock sequence of the examined event, as well as the general seismotectonic knowledge on the broader epicentral area.  相似文献   

17.
Locally recorded data for eighteen aftershocks of a magnitude(mb) 4.6 earthquake occurring near Ukhimath in the Garhwal Himalaya were analysed. A master event technique was adopted to locate seventeen individual aftershock hypocentres relative to the hypocentre of the eighteenth aftershock chosen as the master event. The aftershock epicentres define an approximately 30 km2 rupture zone commensurate with the magnitude of the earthquake. The distribution of epicentres within this zone and the limited amount of first motion data support the view that a group of parallel, sub-vertical, sinistral strike-slip faults oriented N46°, transverse to the regional NW-SE trend of the Garhwal Himalaya, was involved in this seismic episode. Since the estimated focal depth range for aftershocks of this sequence is 3–14 km, we infer that this transverse fault zone extends through the upper crustal layer to a depth of 14 km at least.  相似文献   

18.
汶川地震对现代河流形态的影响与水文效应   总被引：1，自引：0，他引：1  
2008年5月12日14时28分,我国四川发生里氏8.0级大地震,发震构造为龙门山断裂带.形成了NE向映秀-北川断裂地表破裂带,彭县-灌县断裂破裂带以及NW向的小鱼洞破裂带,表现为逆冲-走滑性质.目前,有关地表破裂、次生地质灾害及堰塞湖等开展了大量的调查工作,而地震对河流形态的影响还缺少较为系统的分析.在野外地震地貌考察的基础上,根据河流走向与断层位置关系,并结合地表破裂特征,总结了汶川地震对现代河流形态影响的几种地貌类型:顺向陡坎跌水,河道错动,断寨湖(塘),河流改道等,并对其演化趋势进行了讨论.分析了汶川地震的河流水文效应:地震增加了河流泥沙含量,改变了河流水质,同时,也使得河流与地下水系统之间的联系更为紧密.  相似文献   

19.
The 20 October 1991 Uttarkashi earthquake killed over a thousand people and caused extensive damage to property in the Garhwal Himalaya region. The body wave magnitude of the earthquake was 6.6, and the fault plane solution indicates reverse faulting. The hypocenrre was located at a focal depth of about 12 km between the Chail and Jutogh Thrusts, but movement propagated southward along the Jamak–Gangori Fault (JGF) and Dunda fault (DF) which are developed as blind faults related to the growing Uttarkashi antiform.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号