共查询到20条相似文献，搜索用时 203 毫秒
1.
The interaction modalities of transfer zones connecting rift segments may be influenced by several factors. Amongst these, the location and architecture of transfer zones in narrow rifts has been repeatedly associated with the presence of inherited basement anisotropies. Sand-box models were made to investigate how the orientation, geometry and kinematics of transfer zones depend upon pre-existing basement anisotropies. Analogue models reproduced offset rift segments linked by transfer zones bordered by arcuate normal faults. Strike-slip faults are present inside the transfer zone, provided that angle α (between the extension direction and the axis of the transfer zone) is less than 50°. Narrower transfer zones, striking oblique to the extension direction, occur for angle φ (between the direction perpendicular to the extension direction and the direction of the basement anisotropy) less than 90°; wider transfer zones, subparallel to the extensional direction, occur for φ > 90°. Increasing the overstep induces narrower transfer zones striking subparallel to the extension direction. Similar geometrical and kinematical patterns have been found at transfer zones in narrow rifts. The comparison between experimental and natural data shows how the geometry, kinematics and orientation of natural transfer zones depends upon the trend of inherited anisotropies: transfer zones along inherited basement structures set at lower angles to the extension direction, and display lower aspect ratios, than transfer zones where inherited anisotropies are absent. 相似文献
2.
利用地震资料、油气勘探资料分析了南海北部大陆边缘珠江口-琼东南新生代盆地断裂系统的时空差异及动力学成因机制.珠江口-琼东南盆地古近系裂陷构造层以NE向、近EW向基底正断层构成的伸展断裂系统的几何学、运动学沿着盆地走向有明显变化,盆地内部隐伏的区域性和局部的NW向断裂及相关构造变形带构成伸展断裂系统之间的构造变换带.在空间上,区域性的云开、松涛-松南等NW向构造变换带以西为NE-NEE向正断层构成的"非拆离"伸展断层系,以东为NE向正断层、近EW向正断层(走滑正断层)复合而成的拆离伸展断层系.在时间上,古近纪裂陷作用可划分为早(文昌组沉积期)、中(恩平组/崖城组沉积期)、晚(珠海组/陵水组沉积期)3个有明显差异的裂陷期.裂陷早期,盆地西部以平面式正断层控制的简单地堑、半地堑为主,伸展量相对较小,东部则以铲式正断层控制的复式地堑、半地堑为主,伸展量相对大,断层向深部收敛在中地壳韧性层构成拆离的伸展断层系统.裂陷中期,琼东南盆地、珠江口盆地西部断裂具有继承性活动特点,珠江口盆地东部发育NWW-EW向伸展断层,并向深层切割早期浅层拆离断层,形成深层拆离伸展断层系统,而沿着云开构造变换带发育反转构造.裂陷晚期,琼东南盆地、珠江口盆地西部断裂具有活动性减弱特点,琼东南盆地东部发育NWW-EW向伸展断层,形成深层拆离伸展断层系统,而沿着琼中央构造变换带发育反转、走滑构造.珠江口-琼东南盆地不同区段断裂系统及其构造演化的差异性受盆地基底先存构造、地壳及岩石圈结构及伸展量等多方面因素的影响,拆离伸展断层系统与发育NWW向"贯穿"断裂的基底构造薄弱带、现今地壳局部减薄带相关,南海扩展由东而西的迁移诱导北部大陆边缘块体沿着先存NW向深大断裂发生走滑旋转是导致变换构造带两侧差异伸展的动力学原因,应力场及岩石圈热结构变化是引起拆离断层深度变化的重要因素. 相似文献
3.
This study aims at showing how far pre-existing crustal weaknesses left behind by Proterozoic mobile belts, that pass around cratonic Archean shields (Tanzania Craton to the southeast and Congo Craton to the northwest), control the geometry of the Albertine Rift. Focus is laid on the development of the Lake Albert and Lake Edward/George sub-segments and between them the greatly uplifted Rwenzori Mountains, a horst block located within the rift and whose highest peak rises to >5000 m above mean sea level. In particular we study how the southward propagating Lake Albert sub-segment to the north interacts with the northward propagating Lake Edward/George sub-segment south of it, and how this interaction produces the structures and geometry observed in this section of the western branch of the East African Rift, especially within and around the Rwenzori horst. We simulate behaviour of the upper crust by conducting sandbox analogue experiments in which pre-cut rubber strips of varying overstep/overlap connected to a basal sheet and oriented oblique and/or orthogonal to the extension vector, are placed below the sand-pack. The points of connection present velocity discontinuities to localise deformation, while the rubber strips represent ductile domain affected by older mobile belts. From fault geometry of developing rift segments in plan view and section cuts, we study kinematics resulting from a given set of boundary conditions, and results are compared with the natural scenario. Three different basal model-configurations are used to simulate two parallel rifts that propagate towards each other and interact. Wider overstep (model SbR3) produces an oblique transfer zone with deep grabens (max. 7.0 km) in the adjoining segments. Smaller overlap (model SbR4) ends in offset rift segments without oblique transfer faults to join the two, and produces moderately deep grabens (max. 4.6 km). When overlap doubles the overstep (model SbR5), rifts propagate sub-orthogonal to the extension direction and form shallow valleys (max. 2.9 km). Relative ratios of overlap/overstep between rift segments dictate the kind of transition zone that develops and whether or not a block (like the Rwenzoris) is captured and rotates; hence determining the end-member geometry. Rotation direction is controlled by pre-existing fabrics. Fault orientation, fault kinematics, and block rotation (once in play) reinforce each other; and depending on the local kinematics, different parts of a captured block may rotate with variable velocities but in the same general direction. Mechanical strength anisotropy of pre-structured crust only initially centres fault nucleation and propagation parallel to the grain of weakness of the basement, but at later stages of a protracted period of crustal extension, such boundaries are locally defied. 相似文献
4.
Andreas Henk 《International Journal of Earth Sciences》1993,82(1):3-19
The Saar-Nahe-Basin in SW-Germany is one of the largest Permo-Carboniferous basins in the internal zone of the Variscides. Its evolution is closely related to movements along the Hunsrück Boundary Fault, which separates the Rhenohercynian and the Saxothuringian zones. Recent deep seismic surveys indicate that the Saar-Nahe-Basin formed in the hanging wall of a major detachment which soles out at lower crustal levels at about 16 km depth. Oblique extension along an inverted Variscan thrust resulted in the formation of a half-graben, within more than 8 km of entirely continental strata accumulated. The structural style within the basin is characterized by normal faults parallel to the basin axis and orthogonal transfer fault zones. Balanced cross-section construction and subsidence analysis indicate extension of the orogenically thickened lithosphere by 35%. Subsidence modeling shows discontinuous depth-dependent extension with laterally varying extension factors for crust and mantle lithosphere. Thus, the offset between maximum rift and thermal subsidence can be explained by a zone of mantle extension shifted laterally with respect to the zone of maximum crustal extension. 相似文献
5.
A. A. Peyve 《Geotectonics》2009,43(2):87-99
The accretion of oceanic crust under conditions of oblique spreading is considered. It is shown that deviation of the normal to the strike of mid-ocean ridge from the extension direction results in the formation of echeloned basins and ranges in the rift valley, which are separated by normal and strike-slip faults oriented at an angle to the axis of the mid-ocean ridge. The orientation of spreading ranges is determined by initial breakup and divergence of plates, whereas the within-rift structural elements are local and shallow-seated; they are formed only in the tectonically mobile rift zone. As a rule, the mid-ocean ridges with oblique spreading are not displaced along transform fracture zones, and stresses are relaxed in accommodation zones without rupture of continuity of within-rift structural elements. The structural elements related to oblique spreading can be formed in both rift and megafault zones. At the initial breakup and divergence of continental or oceanic plates with increased crust thickness, the appearance of an extension component along with shear in megafault zones gives rise to the formation of embryonic accretionary structural elements. As opening and extension increase, oblique spreading zones are formed. Various destructive and accretionary structural elements (nearly parallel extension troughs; basin and range systems oriented obliquely relative to the strike of the fault zone and the extension axis; rhomb-shaped extension basins, etc.) can coexist in different segments of the fault zone and replace one another over time. The Andrew Bain Megafault Zone in the South Atlantic started to develop as a strike-slip fault zone that separated the African and Antarctic plates. Under extension in the oceanic domain, this zone was transformed into a system of strike-slip faults divided by accretionary structures. It is suggested that the De Geer Megafault Zone in the North Atlantic, which separated Greenland and Eurasia at the initial stage of extension that followed strike-slip offset, evolved in the same way. 相似文献
6.
The evolution and geometry of the Tertiary Upper Rhine Graben were controlled by a continually changing stress field and the reactivation of pre-existing crustal discontinuities. A period of WNW-ESE extension in the late Eocene and Oligocene was followed by lateral translation from the early Miocene onwards. This study utilizes 3D finite element techniques to simulate extension and lateral translation on a lithospheric scale. Brittle and creep behaviour of lithospheric rocks are represented by elastoplasticity and thermally activated power-law viscoplasticity, respectively. Contact elements allocated with cohesion and frictional coefficients are used to describe pre-existing zones of weakness in the elastic-brittle field. Our results suggest that (1) extension is accommodated along listric border faults to midcrustal depth of 15–16 km. Beneath, pure shear stretching occurs without a need for localized shear zones in lower crust and upper mantle. (2) Ductile flow at midcrustal depth across the graben accounts for the pronounced halfgraben morphology. Thereby, the shape of the border faults, their frictional coefficients, and sedimentary loads have profound effects on the rate of ductile flow across the graben. (3) Horizontal extension of 8–8.5 km and sinistral displacement across the rift of 3–4 km are needed to accommodate the observed sediment thickness. 相似文献
7.
Geometry and growth of an inner rift fault pattern: the Kino Sogo Fault Belt, Turkana Rift (North Kenya) 总被引：1，自引：0，他引：1
A quantitative analysis is presented of the scaling properties of faults within the exceptionally well-exposed Kino Sogo Fault Belt (KSFB) from the eastern part of the 200-km-wide Turkana rift, Northern Kenya. The KSFB comprises a series of horsts and grabens within an arcuate 40-km-wide zone that dissects Miocene–Pliocene lavas overlying an earlier asymmetric fault block. The fault belt is 150 km long and is bounded to the north and south by transverse (N50°E and N140°E) fault zones. An unusual feature of the fault system is that it accommodates very low strains (<1%) and since it is no older than 3 Ma, it could be characterised by extension rates and strain rates that are as low as 0.1 mm/yr and 10−16 s−1, respectively. Despite its immaturity, the fault system comprises segmented fault arrays with lengths of up to 40 km, with individual fault segments ranging up to 9 km in length. Fault length distributions subscribe to a negative exponential scaling law, as opposed to the power law scaling typical of other fault systems. The relatively long faults and segments are, however, characterised by maximum throws of no more than 100 m, providing displacement/length ratios that are significantly below those of other fault systems. The under-displaced nature of the fault system is attributed to early stage rapid fault propagation possibly arising from reactivation of earlier underlying basement fabrics/faults or magmatic-related fractures. Combined with the structural control exercised by pre-existing transverse structures, the KSFB demonstrates the strong influence of older structures on rift fault system growth and the relatively rapid development of under-displaced fault geometries at low strains. 相似文献
8.
A revised assessment of architecture and pre-rift fabric connections of the Oslo Rift has been undertaken and linked to a new appraisal of observations and data related to the initial phase of the rift evolution. In addition to half-graben segmentation, accommodation zones and transfer faults are readily identified in the linking sectors between the two main grabens and between graben segments. Axial flexures are proposed between facing half-grabens. The accommodation zones were generally sites of volcanism during rifting. Pre-rift tectonic structures played an influential role in the rift location and development. The deviant N-S axis of the Vestfold graben segment is viewed as related to pre-rift structural control through faults and shear zones. This area was probably a site of Proterozoic/Palaeozoic crustal and lithospheric attenuation.
Field evidence suggests that the rift started as a crustal sag with no apparent surface faulting in a flat and low-lying land at a time about 305–310 Ma. Volcanism, sub-surface sill intrusion and faulting started about simultaneously some time after the initial sag (300–305 Ma). Faulting and basaltic volcanism were initially localized to transfer faults along accommodation zones and a NNW-SSE transtensional zone along the eastern margin of the incipient Vestfold graben segment. This transtensional zone was probably created by right-lateral simple shear tracing pre-rift structures in response to a regional stress field with the tensional axis normal and the maximum compressional axis parallel to the NNE-SSW-trending rift axis. 相似文献
9.
《Journal of Structural Geology》1999,21(8-9):1267-1274
Sandbox models have been widely used to investigate normal fault geometries, evolution and propagation. As modelling attempts to investigate more aspects of normal faulting, the effects of pre-existing fabrics on normal fault geometry developed within the brittle upper crust have become a topic of interest. Analogue models have been developed for oblique rifting and the influence of pre-existing fabrics on transfer zone geometry. These models use pre-cut geometries in underlying plates to impose `pre-existing' fabrics on the developing normal fault system. However, to really mimic natural systems it is the sand itself that should contain the pre-existing fabrics. The problem is that cohesionless sand has no tensile strength, while the influence of pre-existing fabrics on rift structure in the upper crust attests to the important role played by relatively small variations in rock strength anisotropy caused by pre-existing fabrics. Consequently it is necessary to assess how significant the departures are between model and natural examples and whether a new approach to modelling pre-existing rift structures is required. 相似文献
10.
Affected by thermal perturbation due to mantle uprising,the rheological structure of the lithosphere could be modified,which could lead to different rifting patterns from shelf to slope in a passive continental margin.From the observed deformation style on the northern South China Sea and analogue modeling experiments,we find that the rift zone located on the shelf is characterized by half grabens or simple grabens controlled mainly by long faults with large vertical offset,supposed to be formed with normal lithasphere extension.On the slope,where the lithosphere is very hot due to mantle upwelling and heating,composite grabens composed of symmetric grabens developed.The boundary and inner faults are all short with small vertical offset.Between the zones with very hot and normal lithosphere,composite half grnbens composed of half grabens or asymmetric grabens formed,whose boundary faults are long with large vertical offset,while the inner faults are relatively short.Along with the thickness decrease of the brittle upper crust due to high temperature,the deformation becomes more sensitive to the shape of a pre-existing weakness zone and shows orientation variation along strike.When there was a bend in the pre-existing weakness zone,and the basal plate was pulled by a clockwise rotating stress,the strongest deformation always occurs along the middle segment and at the transition area from the middle to the eastern segments,which contributes to a hotter lithosphere in the middle segment,where the Baiyun (白云) sag formed. 相似文献
11.
In this paper we assess two competing tectonic models for the development of the Isa Superbasin (ca 1725–1590 Ma) in the Western Fold Belt of the Mt Isa terrane. In the ‘episodic rift‐sag’ tectonic model the basin architecture is envisaged as similar to that of a Basin and Range province characterised by widespread half‐graben development. According to this model, the Isa Superbasin evolved during three stages of the Mt Isa Rift Event. Stage I involved intracontinental extension, half‐graben development, the emergence of fault scarps and tilt‐blocks, and bimodal volcanism. Stage II involved episodic rifting and sag during intervening periods of tectonic quiescence. Stage III was dominated by thermal relaxation of the lithosphere with transient episodes of extension. Sedimentation was controlled by the development of arrays of half‐grabens bounded by intrabasinal transverse or transfer faults. The competing ‘strike‐slip’ model was developed for the Gun Supersequence stratigraphic interval of the Isa Superbasin (during stage II and the beginning of stage III). According to this model, sinistral movements along north‐northeast‐orientated strike‐slip faults took place, with oblique movements along northwest‐orientated faults. This resulted in the deposition of southeast‐thickening ramp sequences with local sub‐basin depocentres forming to the west and north of north‐northeast‐ and northwest‐trending faults, respectively. It is proposed that dilation zones focused magmatism (e.g. Sybella Granite) and transfer of strike‐slip movement resulted in transient uplift along the western margin of the Mt Gordon Arch. Our analysis supports the ‘episodic rift‐sag’ model. We find that the inferred architecture for the strike‐slip model correlates poorly with the observed structural elements. Interpretation is made difficult because there has been significant modification and reorientation of fault geometry during the Isan Orogeny and these effects need to be removed before any assertion as to the basin structure is made. Strike‐slip faulting does not explain the regional‐scale pattern of basin subsidence. The ‘episodic rift‐sag’ model explains the macroscopic geometry of the Isa Superbasin and is consistent with the detailed sedimentological analysis of basin facies architecture, and the structural history and geometry. 相似文献
12.
Numerical experiments reproduce the fundamental architecture of magma-poor rifted margins such as the Iberian or Alpine margins
if the lithosphere has a weak mid-crustal channel on top of strong lower crust and a horizontal thermal weakness in the rift
center. During model extension, the upper crust undergoes distributed collapse into the rift center where the thermally weakened
portion of the model tears. Among the features reproduced by the modeling, we observe: (1) an array of tilted upper-crustal
blocks resting directly on exhumed mantle at the distal margin, (2) consistently oceanward-dipping normal faults, (3) a mid-crustal
high strain zone at the base of the crustal blocks (S-reflector), (4) new ocean floor up against a low angle normal fault
at the tip of the continent, (5) shear zones consistent with continentward-dipping reflectors in the mantle lithosphere, (6)
the mismatch frequently observed between stretching values inferred from surface extension and bulk crustal thinning at distal
margins (upper plate paradox). Rifting in the experiment is symmetric at a lithospheric scale and the above features develop
on both sides of the rift center. We discuss three controversial points in more detail: (1) weak versus strong lower crust,
(2) the deformation pattern in the mantle, and (3) the significance of detachment faults during continental breakup. We argue
that the transition from wide rifting towards narrow rifting with a pronounced polarity towards the rift center is associated
with the advective growth of a thermal perturbation in the mantle lithosphere. 相似文献
13.
New kinematic and structural data from the tectonic windows of eastern Crete and the Dodecanese Islands combined with strain and quartz fabric analysis have enabled us to determine a detailed structural evolution of the region and to present a plate tectonic scenario for the southeast Hellenides. During the Early Mesozoic, the southeastern part of Apulia was separated from North Africa and the adjacent microplates by WNW‐trending rift zones and NE‐trending transfer faults. Displacement along the transfer faults has locally reoriented these rift zones into an ENE–WSW direction. Finite strain and quartz fabric asymmetry data indicate that in Late Cenozoic time, NNW‐directed nappe movements caused a nearly coaxial deformation along the ENE–WSW trending rift segments and non coaxial top‐to‐the‐southeast shearing along the WNW‐trending rift segments, as well as along the pre‐existing NE‐trending transfer faults. Tectonic style along the margin varies in response to the obliquity of the principal shortening direction with respect to the margin. These variations could be due to the pre‐convergence geometry of the southern margin of Eurasia and to local strain partitioning effects. Furthermore, a tectonic model is presented in which syncompressional uplift and vertical buoyancy of the subducted crustal slice caused the rapid exhumation of metamorphic units in the south Hellenides. Copyright © 2003 John Wiley & Sons, Ltd. 相似文献
14.
T. E. Ogden M. A. McLean T. J. Rawling R. A. Cayley 《Australian Journal of Earth Sciences》2016,63(5):551-570
The Buchan Rift, in northeastern Victoria, is a north–south-trending basin, which formed in response to east–west crustal extension in the Early Devonian. The rift is filled mostly with Lower Devonian volcanic and volcaniclastic rock of the Snowy River Volcanics. Although the structure and geometry of the Buchan Rift and its major bounding faults are well mapped at the surface, a discrepancy exists between the surface distribution of the thickest rift fill and its expected potential field response. To investigate this variation, two new detailed land-based gravity surveys, which span the rift and surrounding basement rocks in an east–west orientation, have been acquired and integrated with pre-existing government data. Qualitative interpretation of the observed magnetic data suggests the highly magnetic rocks of the Snowy River Volcanics have a wider extent at depth than can be mapped at the surface. Forward modelling of both land-based gravity data and aeromagnetic data supports this interpretation. With the Snowy River Volcanics largely confined within the Buchan Rift, resolved geometries also allow for the interpretation of rift boundaries that are wider at depth. These geometries are unusual. Unlike typical basin inversions that involve reactivation of rift-dipping faults, the bounding faults of the Buchan Rift dip away from the rift axis and thus appear unrelated to the preceding rifting episode. Limited inversion of previous extensional rift faults to deform the rift-fill sequences (e.g. Buchan Synclinorium) appears to have been followed by the initiation of new reverse faults in outboard positions, possibly because the relatively strong igneous rift fill began to act as a rigid basement ramp during continued E–W crustal shortening in the Middle Devonian Tabberabberan Orogeny. Overthrusting of the rift margins by older sediments and granite intrusions of the adjacent Tabberabbera and Kuark zones narrowed the exposed rift width at surface. This scenario may help explain the steep-sided geometries and geophysical expressions of other rift basins in the Tasmanides and elsewhere, particularly where relatively mechanically strong basin fill is known or suspected. 相似文献
15.
This study investigates the rifting structures of Santos Basin at the Southeastern Brazilian margin, based on an integrated geophysical approach. Our aim is to constrain the crustal basement topography of central and northern Santos basin, the presence of magmatism and the role of inherited structures in space and time through the rifting processes. We present a new high resolution aeromagnetic dataset, which in correlation with gravity anomalies enables us to interpret the tectonic trends and crustal basement structures. We calculated the magnetic basement depth for the central and northern Santos Basin using power spectrum analysis. The obtained depths range between 2 and 9 kms, and are comparable with results from previous works. From our integrated study, three margin domains could be identified, which display distinct rifting structures and are characterized by important lateral variation along the margin. The proximal domain displays trends and magnetic basement blocks NE–SW oriented, i.e., parallel to inherited onshore crustal basement with an inflexion to E–W oriented trends; the necking domain is characterized by oblique magnetic basement highs and lows (E–W and NW–SE) and a structural trend change. The trends and magnetic basement highs are bounded by NW–SE negative anomalies, interpreted as transfer zones. Oceanwards at the distal domain, the lineaments and transfer zones show a progressive structural inflexion to ENE and E–W, sub-parallel to adjacent South Atlantic Fracture Zones. The observed crustal basement architecture and segmentation suggest the reactivation of pre-rift structures at the proximal margin and the obliquity of rifting relative to them. From the proximal domain oceanwards the structural pattern may reflect the passage from a “continental type” domain, where lithospheric inheritance controls the deformation, to a distal margin where this influence diminishes and “new” structural trends are formed. We propose that northern Santos Basin show evidences of an intensely deformed zone, where rift evolved under oblique extension, similar to that observed at transform margin segments. 相似文献
16.
《International Geology Review》2012,54(15):1889-1921
This article describes the geometry and structural architecture of the Viù Deformation Zone (VDZ), a brittle-ductile to brittle structure affecting the metamorphic units of the inner Western Alps, and its role in modifying the pre-existing syn-metamorphic structural setting. The VDZ reactivates and displaces the contact between two different oceanic units, the Lanzo Ultramafic Complex and the Lower Susa–Lanzo Valleys Unit, characterized by polyphase syn-metamorphic deformation. It shows a strike-slip duplex geometry, constituted by N–S reverse-dextral faults linked by NW–SE antithetical sinistral-reverse faults, and represents a contractional step-over zone along a N–S regional dextral-reverse structure, the Col del Lis-Trana Deformation Zone. Formation of these transpressional structures steepened the Lanzo Ultramafic Complex during the last stages of its exhumation. The 3D geometry of the VDZ was strongly controlled by the reactivation of pre-existing structures, such as the buried western edge of the Ivrea body and metamorphic foliations. Brittle reactivation also induced block rotation along the VDZ, causing anomalous kinematic relations between the VDZ-associated faults. This study, hence, shows that in metamorphic orogens the mechanisms generating strike-slip duplexes may be different from those classically provided by the literature, with brittle reactivation and block rotation strongly prevailing on newly formed faults. In such orogens, moreover, rotations induced by transpressional faulting may sometimes be mistaken for steep syn-metamorphic shear zones. Underestimating the effects of later brittle deformation and associated rotations may cause erroneous interpretations of the tectonic evolution of orogens. 相似文献
17.
T. V. Gerya 《Petrology》2013,21(6):550-560
This work presents high-resolution 3D numerical model of transform fault initiation at rifted continental margins. Our petrological-thermomechanical visco-plastic model allows for spontaneous nucleation of oceanic spreading process in a continental rift zone and takes into account new oceanic crust growth driven by decompression melting of the asthenospheric mantle. Numerical model predicts that ridge-transform spreading pattern initiate in several subsequent stages: crustal rifting (0–1.5 Myr), spreading centers nucleation and propagation (1.5–3 Myr), proto-transform fault initiation and rotation (3–5 Myr) and mature ridge-transform spreading (> 5 Myr). Comparison of modeling results with the natural data from the Woodlark Basin suggests that the development of this region closely matches numerical predictions. Similarly to the model, the Moresby (proto-) Transform terminates in the oceanic rather than in the continental crust. This fault associates with a notable topographic depression and formed within 0.5–2 Myr while linking two offset overlapping spreading segments. Model reproduces well characteristic “rounded” contours of the spreading centers as well as the presence of a remnant of the broken continental crustal bridge observed in the Woodlark Basin. Proto-transform fault traces and truncated tip of one spreading center present in the model are also documented in nature. Numerical results are in good agreement with the concept of Taylor et al. (2009) which suggests that spreading segments nucleate en echelon in overlapping rift basins and that transform faults develop as or after spreading nucleates. Our experiments also allow to refine this concept in that (proto)-transform faults may also initiate as oblique rather than only spreading-parallel tectonic features. Subsequent rotation of these faults toward the extension-parallel direction is governed by space accommodation during continued oceanic crust growth within offset ridge-transform intersections. 相似文献
18.
Five successive geodimeter surveys during a five-year period yield hints as to the manner and rate of crustal extension in the Ethiopian rift valley. The northern geodimeter network traverses an en-echelon offset in the Wonji fault belt at latitude 8°30′N; this belt comprises the youngest volcanism and faulting of the rift floor. The northern network surveys reveal progressive rift extension at mean rates of 3–5 mm/year and strain rates of 6–16 · 10−7/yr, essentially confined within the Wonji fault belt segments. Small longitudinal motions of persistent dextral sense have occurred in the intervening zone between the offset segments. It is too early to say whether these deformations are local, regional or plate-tectonic phenomena, but the present aseismicity of the rift suggests the buildup of regional strain. 相似文献
19.
The NW-dipping Fiery Creek Fault System, located in the northern Mount Isa terrane, comprises numerous sub-parallel faults that record multiple episodes of Palaeo- to Mesoproterozoic movement. Hanging wall wedge-shaped stratal geometries and marked stratal thickness variation across the fault system indicate that the earliest movement occurred during episodic intracontinental extension (Mount Isa Rift Event; ca. 1710–1655 Ma). Reactivation of the fault system during regional shortening and basin inversion associated with the Mesoproterozoic Isan Orogeny (ca. 1590–1500 Ma) resulted in complex three-dimensional hanging wall geometries and highly variable strain in the hanging wall strata along the fault system. This has resulted in the development of discrete hanging wall deformation compartments, that are characterised by different structural styles. High strain compartments are characterised by relatively intense folding and the development of break-back thrusts, whereas low strain compartments are only weakly folded. Variations in hanging wall strain are attributed to selective reactivation of normal fault segments, controlled by the pre-inversion fault dip and lithological contrasts across the faults. Variation of the pre-inversion fault dip is interpreted to have been caused by episodic tilt-block rotation during crustal extension. Moderately dipping faults active early in the Mount Isa Rift Event show the greatest degree of reactivation, whereas younger and steeper normal faults have behaved as buttresses during inversion with strain focussed in zones of upright folding in the hanging wall. 相似文献
20.
Interaction of metamorphism, deformation and exhumation in large convergent orogens 总被引：11，自引：0，他引：11
Coupled thermal‐mechanical models are used to investigate interactions between metamorphism, deformation and exhumation in large convergent orogens, and the implications of coupling and feedback between these processes for observed structural and metamorphic styles. The models involve subduction of suborogenic mantle lithosphere, large amounts of convergence (≥ 450 km) at 1 cm yr?1, and a slope‐dependent erosion rate. The model crust is layered with respect to thermal and rheological properties — the upper crust (0–20 km) follows a wet quartzite flow law, with heat production of 2.0 μW m?3, and the lower crust (20–35 km) follows a modified dry diabase flow law, with heat production of 0.75 μW m?3. After 45 Myr, the model orogens develop crustal thicknesses of the order of 60 km, with lower crustal temperatures in excess of 700 °C. In some models, an additional increment of weakening is introduced so that the effective viscosity decreases to 1019 Pa.s at 700 °C in the upper crust and 900 °C in the lower crust. In these models, a narrow zone of outward channel flow develops at the base of the weak upper crustal layer where T≥600 °C. The channel flow zone is characterised by a reversal in velocity direction on the pro‐side of the system, and is driven by a depth‐dependent pressure gradient that is facilitated by the development of a temperature‐dependent low viscosity horizon in the mid‐crust. Different exhumation styles produce contrasting effects on models with channel flow zones. Post‐convergent crustal extension leads to thinning in the orogenic core and a corresponding zone of shortening and thrust‐related exhumation on the flanks. Velocities in the pro‐side channel flow zone are enhanced but the channel itself is not exhumed. In contrast, exhumation resulting from erosion that is focused on the pro‐side flank of the plateau leads to ‘ductile extrusion’ of the channel flow zone. The exhumed channel displays apparent normal‐sense offset at its upper boundary, reverse‐sense offset at its lower boundary, and an ‘inverted’ metamorphic sequence across the zone. The different styles of exhumation produce contrasting peak grade profiles across the model surfaces. However, P–T–t paths in both cases are loops where Pmax precedes Tmax, typical of regional metamorphism; individual paths are not diagnostic of either the thickening or the exhumation mechanism. Possible natural examples of the channel flow zones produced in these models include the Main Central Thrust zone of the Himalayas and the Muskoka domain of the western Grenville orogen. 相似文献