共查询到20条相似文献，搜索用时 25 毫秒
1.
We study the interaction between an erupting solar filament and a nearby coronal hole, based on multi-viewpoint observations from the Solar Dynamics Observatory and STEREO. During the early evolution of the filament eruption, it exhibits a clockwise rotation that brings its easternmost leg in contact with the oppositely aligned field at the coronal hole boundary. The interaction between the two magnetic-field systems is manifested as the development of a narrow contact layer in which we see enhanced EUV brightening and bi-directional flows, suggesting that the contact layer is a region of strong and ongoing magnetic reconnection. The coronal mass ejection (CME) resulting from this eruption is highly asymmetric, with its southern portion opening up to the upper corona, while the northern portion remains closed and connected to the Sun. We suggest that the erupting flux rope that made up the filament reconnected with both the open and closed fields at the coronal hole boundary via interchange reconnection and closed-field disconnection, respectively, which led to the observed CME configuration. 相似文献
2.
A simplified magnetic configuration is used to model some aspects of observations of a rotating sunspot and its overlying coronal loops. In the observations a large sunspot rotates over a few days and two smaller pores spiral into it. The coronal loops become sigmoidal in shape and flares are seen in Yohkoh/SXT and GOES. We have modeled the sunspot, one of the pores and the loops connecting these to a diffuse region of plasma of the opposite polarity. Two sets of MHD simulations are considered: (i) rotation of the sunspot and pore alone and (ii) rotation of the sunspot with inflow of the pore. Rotation alone can trigger the ideal kink instability in the loops but only for a rotation that is much greater than the observed value. There is no build-up of current which is needed for magnetic reconnection to occur. However, when inflow is included a strong build-up of current is seen as the pore merges with the sunspot. Comparing these results from the simulations with the observations, we find that the observed merging of the pores coincides with the timing of the flare. Therefore, we suggest that the merging of the pores with the large sunspot may be responsible for the flaring. 相似文献
3.
On 5 April 2008, a filament at the periphery of an active region was observed by the Extreme Ultraviolet Imager telescope aboard the STEREO-A spacecraft, which showed up as a prominence eruption in the field-of-view from STEREO-B. The filament at STEREO-A 304 Å was first lengthened toward a region with weak overlying magnetic field so evolved as a large-scale one consisting of bright and dark threads twisting with each other, and then the portion below the weak field underwent an eruption. Meanwhile, the corresponding STEREO-B 304 Å prominence threads exhibited a kinking structure and tilting motion, with its center deflecting from the radial direction. By using three-dimension (3D) reconstruction technology, we obtain the 3D topology for the kinked prominence when its apex arrived at 1.4 radii, from which a clockwise rotation of about 90° is found in the course of the eruption. By comparing the 3D structure with the magnetic-field configuration computed by using the Potential-Field Source-Surface (PFSS) model, it is suggested that the filament erupted against the rather weaker than stronger overlying magnetic field, which make it appear to tilt toward one side. 相似文献
4.
We show that the rotation of coronal holes can be understood in terms of a current-free model of the coronal magnetic field, in which holes are the footpoint locations of open field lines. The coronal field is determined as a function of time by matching its radial component to the photospheric flux distribution, whose evolution is simulated including differential rotation, supergranular diffusion, and meridional flow. We find that ongoing field-line reconnection allows the holes to rotate quasi-rigidly with their outer-coronal extensions, until their boundaries become constrained by the neutral line of the photospheric field as it winds up to form stripes of alternating magnetic polarity. This wind-up may be significantly retarded by a strong axisymmetric field component which forces the neutral line to low latitudes; it is also gradually halted by the cross-latitudinal transport of flux via supergranular diffusion and a poleward bulk flow. We conclude that a strong axisymmetric field component is responsible for the prolonged rigid rotation of large meridional holes during the declining phase of the sunspot cycle, but that diffusion and flow determine the less rigid rotation observed near sunspot maximum, when the holes corotate with their confining polarity stripes. 相似文献
5.
We study an active region coronal jet that evolved from southward of a major sunspot of NOAA AR12178 on 04 October 2014. This jet is associated with an onset of the GOES C1.4 flare. We use SDO/AIA, SDO/HMI, GONG \(H\upalpha\) and GOES data for analysing the observed event. We term this jet as a two-stage confined eruption of the plasma. In the first stage, some plasma erupts above the compact flaring region. In the second stage, this eruptive jet plasma and associated magnetic field lines interact with another set of distinct magnetic field lines present in its south-east direction. This creates an X-point region, where the second stage of the jet eruption is deflected above it on a curvilinear path into overlying corona. The lower part of the jet is followed by a cool surge eruption, which is visible only in \(H{\upalpha}\) emissions. The magnetic flux cancellation at the footpoint causes the triggering of C-class flare eruption. This flare energy release further triggers first stage of the coronal jet eruption. The second stage of the jet eruption is a consequence of an interaction of two distinct sets of magnetic field lines in the overlying corona. The first stage of the coronal jet and co-spatial but lagging cool surge may have common origin due to the reconnection generated heating pulses. This complex evolution of the coronal jet involves flare heating induced first stage plasma eruption, guiding of jet’s material above a junction of two distinct sets of field lines in the corona, and intra-relationship with cool surge. In effect, it imposes rigid constraints on the existing jet models. 相似文献
6.
This article is the third in a series working towards the construction of a realistic, evolving, non-linear force-free coronal-field model for the solar magnetic carpet. Here, we present preliminary results of 3D time-dependent simulations of the small-scale coronal field of the magnetic carpet. Four simulations are considered, each with the same evolving photospheric boundary condition: a 48-hour time series of synthetic magnetograms produced from the model of Meyer et al. (Solar Phys. 272, 29, 2011). Three simulations include a uniform, overlying coronal magnetic field of differing strength, the fourth simulation includes no overlying field. The build-up, storage, and dissipation of magnetic energy within the simulations is studied. In particular, we study their dependence upon the evolution of the photospheric magnetic field and the strength of the overlying coronal field. We also consider where energy is stored and dissipated within the coronal field. The free magnetic energy built up is found to be more than sufficient to power small-scale, transient phenomena such as nanoflares and X-ray bright points, with the bulk of the free energy found to be stored low down, between 0.5?–?0.8 Mm. The energy dissipated is currently found to be too small to account for the heating of the entire quiet-Sun corona. However, the form and location of energy-dissipation regions qualitatively agree with what is observed on small scales on the Sun. Future MHD modelling using the same synthetic magnetograms may lead to a higher energy release. 相似文献
7.
We demonstrate that major asymmetries in erupting filaments and CMEs, namely major twists and non-radial motions are typically related to the larger-scale ambient environment around eruptive events. Our analysis of prominence eruptions observed by the STEREO, SDO, and SOHO spacecraft shows that prominence spines retain, during the initial phases, the thin ribbon-like topology they had prior to the eruption. This topology allows bending, rolling, and twisting during the early phase of the eruption, but not before. The combined ascent and initial bending of the filament ribbon is non-radial in the same general direction as for the enveloping CME. However, the non-radial motion of the filament is greater than that of the CME. In considering the global magnetic environment around CMEs, as approximated by the Potential Field Source Surface (PFSS) model, we find that the non-radial propagation of both erupting filaments and associated CMEs is correlated with the presence of nearby coronal holes, which deflect the erupting plasma and embedded fields. In addition, CME and filament motions, respectively, are guided towards weaker field regions, namely null points existing at different heights in the overlying configuration. Due to the presence of the coronal hole, the large-scale forces acting on the CME may be asymmetric. We find that the CME propagates usually non-radially in the direction of least resistance, which is always away from the coronal hole. We demonstrate these results using both low- and high-latitude examples. 相似文献
8.
G. W. Pneuman 《Solar physics》1980,65(2):369-385
The observed interrelationship between coronal transients and eruptive prominences is used as the basis for a theoretical MHD model of these events. The model begins with an equilibrium configuration consisting of a coronal loop or arcade with a filament lying underneath with its axis oriented perpendicular to the overlying field. The lifting of the filament from the solar surface produces an increase in magnetic pressure under the helmet which drives it outward. This increased pressure is associated with the internal field of the filament as well as the field beneath it. The underlying field could be that which produced the filament eruption or, alternatively, reconnected field lines formed by the inward collapse of the legs of the transient towards the neutral line beneath the rising prominence. We do not attempt to explain the filament eruption which may be due to internal forces in the prominence or, alternatively, from forces imposed from beneath as would be produced by emerging flux. In the latter case, the filament is passive and merely acts as a tracer for the more fundamental underlying process.It is shown that the outward force per unit mass produced by the driving magnetic field and the inward restoring forces in the overlying field due to magnetic tension and gravity all decrease with distance at the same rate - namely, as the inverse square of the distance from the solar center. Hence, the ratio of net outward to inward force is independent of radial distance from the Sun. A stability analysis shows that this situation is one of neutral stability.A mathematical model of this physical process is described in which the MHD equations in simplified form, neglecting gas pressure forces, are solved in time for the velocity, width, density, and magnetic field strength of the transient. The solutions show that the velocity increases sharply close to the Sun but quickly approaches a constant value. The width increases linearly with radial distance. Both of these results are in agreement with observations. An examination of the forces exerted on the legs of the transient shows that their motion should be horizontally inward.On leave from the High Altitude Observatory, National Center for Atmospheric Research, Boulder, Colo., U.S.A. 相似文献
9.
Louise K. Harra Nancy U. Crooker Cristina H. Mandrini Lidia van Driel-Gesztelyi Sergio Dasso Jingxiu Wang Heather Elliott Gemma Attrill Bernard V. Jackson Mario M. Bisi 《Solar physics》2007,244(1-2):95-114
We describe the interplanetary coronal mass ejections (ICMEs) that occurred as a result of a series of solar flares and eruptions
from 4 to 8 November 2004. Two ICMEs/magnetic clouds occurring from these events had opposite magnetic orientations. This
was despite the fact that the major flares related to these events occurred within the same active region that maintained
the same magnetic configuration. The solar events include a wide array of activities: flares, trans-equatorial coronal loop
disappearance and reformation, trans-equatorial filament eruption, and coronal hole interaction. The first major ICME/magnetic
cloud was predominantly related to the active region 10696 eruption. The second major ICME/magnetic cloud was found to be
consistent with the magnetic orientation of an erupting trans-equatorial filament or else a rotation of 160° of a flux rope
in the active region. We discuss these possibilities and emphasize the importance of understanding the magnetic evolution
of the solar source region before we can begin to predict geoeffective events with any accuracy. 相似文献
10.
We describe a partial filament eruption on 11 December 2011 that demonstrates that the inclusion of mass is an important next step for understanding solar eruptions. Observations from the Solar Terrestrial Relations Observatory-Behind (STEREO-B) and the Solar Dynamics Observatory (SDO) spacecraft were used to remove line-of-sight projection effects in filament motion and correlate the effect of plasma dynamics with the evolution of the filament height. Flux cancellation and nearby flux emergence are shown to have played a role in increasing the height of the filament prior to eruption. The two viewpoints allow the quantitative estimation of a large mass-unloading, the subsequent radial expansion, and the eruption of the filament to be investigated. A 1.8 to 4.1 lower-limit ratio between gravitational and magnetic-tension forces was found. We therefore conclude that following the loss-of-equilibrium of the flux-rope, the radial expansion of the flux-rope was restrained by the filamentary material until 70% of the mass had evacuated the structure through mass-unloading. 相似文献
11.
Jiayan Yang Yunchun Jiang Bo Yang Junchao Hong Dan Yang Yi Bi Ruisheng Zheng Haidong Li 《New Astronomy》2012,17(8):732-738
By means of Hα, EUV, soft X-ray, hard X-ray, and photospheric magnetic field observations, we report the surge-like eruption of a small-scale filament, called “blowout surge” according to recent observations, occurring on a plage region around AR 10876 on 1 May 2006. Along magnetic polarity reversal boundaries with obvious magnetic cancelations, the filament was located underneath a compact coronal arcade and close to one end of large coronal loops around the AR’s periphery. The filament started to erupt about 8 min before the main impulsive phase of a small two-ribbon flare, which had two Hα blue-wing kernels connected by hard X-ray loop-top sources on the both sides of the filament. After the flare end, the filament further underwent a distant eruption following a path nearly along the preexisting large loops, and thus looked like an Hα surge and an EUV jet. During the eruption, a small coronal dimming was formed near the flare, while weak brightenings appeared around the remote end of the large loops. We interpret these joint observations as the filament eruption being confined and guided by the large loops. The filament eruption, initially embedded in one footpoint region of the large loops, can break away from the magnetic restraint of the overlying compact arcade, but might be still limited inside the large loops. As a result, the eruption took a surge form that can only expand laterally along the large loops rather than erupt radially. 相似文献
12.
We consider an approximation sometimes used for current sheets in flux-rope models of eruptive flares. This approximation is based on a linear expansion of the background field in the vicinity of the current sheet, and it is valid when the length of the current sheet is small compared to the scale length of the coronal magnetic field. However, we find that flux-rope models which use this approximation predict the occurrence of an eruption due to a loss of ideal-MHD equilibrium even when the corresponding exact solution shows that no such eruption occurs. Determination of whether a loss of equilibrium exists can only be obtained by including higher order terms in the expansion of the field or by using the exact solution. 相似文献
13.
We propose a new model for the initiation of solar coronal mass ejections (CMEs) and CME-associated flares. The model is inferred from observations of a quiescent filament eruption in the north-western quadrant of the solar disk on 4 September 2000. The event was observed with the Siberian Solar Radio Telescope (5.7 GHz), the Nobeyama Radioheliograph (17 GHz) and SOHO/EIT and LASCO. Based on the observations, we suggest that the eruption could be caused by the interaction of two dextral filaments. According to our model, these two filaments merge together to form a dual-filament system tending to form a single long filament. This results in a slow upward motion of the dual-filament system. Its upward expansion is prevented by the attachment of the filaments to the photosphere by filament barbs as well as by overlying coronal arcades. The initial upward motion is caused by the backbone magnetic field (first driving factor) which connects the two merging filaments. Its magnetic flux increases slowly due to magnetic reconnection of the cross-interacting legs of these filaments. If a total length of the dual-filament system is large enough, then the filament barbs detach themselves from the solar surface due to magnetic reconnection between the barbs with oppositely directed magnetic fields. The detachment of the filament barbs completes the formation of the eruptive filaments themselves and determines the helicity sign of their magnetic fields. The appearance of a helical magnetic structure creates an additional upward-directed force (second driving factor). A combined action of these two factors causes acceleration of the dual-filament system. If the lifting force of the two factors is sufficient to substantially extend the overlying coronal magnetic arcade, then magnetic reconnection starts below the eruptive filament in accordance with the classical scheme, and the third driving factor comes into play. 相似文献
14.
C. H. Mandrini P. Demoulin B. Schmieder E. E. Deluca E. Pariat W. Uddin 《Solar physics》2006,238(2):293-312
A major two-ribbon X17 flare occurred on 28 October 2003, starting at 11:01 UT in active region NOAA 10486. This flare was
accompanied by the eruption of a filament and by one of the fastest halo coronal mass ejections registered during the October–November
2003 strong activity period. We focus on the analysis of magnetic field (SOHO/MDI), chromospheric (NainiTal observatory and
TRACE), and coronal (TRACE) data obtained before and during the 28 October event. By combining our data analysis with a model
of the coronal magnetic field, we concentrate on the study of two events starting before the main flare. One of these events,
evident in TRACE images around one hour prior to the main flare, involves a localized magnetic reconnection process associated
with the presence of a coronal magnetic null point. This event extends as long as the major flare and we conclude that it
is independent from it. A second event, visible in Hα and TRACE images, simultaneous with the previous one, involves a large-scale
quadrupolar reconnection process that contributes to decrease the magnetic field tension in the overlaying field configuration;
this allows the filament to erupt in a way similar to that proposed by the breakout model, but with magnetic reconnection
occurring at Quasi-Separatrix Layers (QSLs) rather than at a magnetic null point.
Electronic supplementary material Electronic supplementary material is available for this article at and accessible for authorised users. 相似文献
15.
Haidong Li Jiayan Yang Yunchun Jiang Yi Bi Zhining Qu Hechao Chen 《Astrophysics and Space Science》2018,363(2):26
We present a study of a mini-filament erupting in association with a circular ribbon flare observed by NVST and SDO/AIA on 2014 March 17. The filament was located at one footpoint region of a large loops. The potential field extrapolation shows that it was embedded under a magnetic null point configuration. First, we observed a brightening of the filament at the corresponding EUV images, close to one end of the filament. With time evolution, a circular flare ribbon was observed around the filament at the onset of the eruption, which is regarded as a signature of reconnection at the null point. After the filament activation, its eruption took the form of a surge, which ejected along one end of a large-scale closed coronal loops with a curtain-like shape. We conjecture that the null point reconnection may facilitate the eruption of the filament. 相似文献
16.
We will present detailed observations of the asymmetrical eruption of a large quiescent filament on 24 November 2002, which was followed by a two-ribbon flare, three coronal dimmings, endpoint brightenings, and a very fast halo-type coronal mass ejection (CME). Before the eruption, the filament lay along the main neutral line (MNL) underneath a single-arcade helmet streamer with a simple bipolar configuration. However, photospheric magnetic fields on both sides of the filament showed an asymmetrical distribution, and the filament and MNL were not located just at the center of the streamer base but were closer to the eastern leg of the streamer arcade. Therefore, instead of erupting along the streamer’s symmetrical axis, the filament showed a nonradial and asymmetrical eruption. It lifted from the eastern flank of the streamer arcade to impact the western leg directly, leading to an asymmetrical CME that expanded westward; eventually the streamer was disrupted significantly. Accordingly, the opposite-polarity coronal dimmings at both sides of the filament forming in the eruption also showed an asymmetrical area distribution. We thus assume that the streamer arcade could guide the filament at the early eruption phase but failed to restrain it later. Consistent with previous results, these observations suggest that the global background magnetic field can impose additional action on the initial eruption of the filament and CME, as well as the dimming configuration. 相似文献
17.
An analysis is made of the Martens-Kuin filament eruption model in relation to observations of coronal mass ejections (CMEs). The field lines of this model are plotted in the vacuum or infinite resistivity approximation with two background fields. The first is the dipole background field of the model and the second is the potential streamer model of Low. The assumption is made that magnetic field evolution dominates compression or other effects which is appropriate for a low- coronal plasma. The Martens-Kuin model predicts that, as the filament erupts, the overlying coronal magnetic field lines rise in a manner inconsistent with observations of CMEs associated with eruptive filaments. Initially, the bright arc of a CME broadens in time much more slowly than the dark cavity between it and the filament, whereas in the model they broaden at the same rate or the bright arc broadens more rapidly than the dark cavity, depending on the background field. Thus, this model and, by generalization the whole class of so-called Kuperus-Raadu configurations in which a neutral point occurs below the filament, are of questionable utility for CME modeling. An alternate case is considered in which the directions of currents in the Martens-Kuin model are reversed resulting in a so-called normal polarity configuration of the filament magnetic field. In this case, a neutral line occurs above the current-carrying filament. The background field lines now distort to support the filament and help eject it. While the vacuum field results make this configuration appear very promising, a full two- or more-dimensional MHD simulation is required to properly analyze the dynamics resulting from this configuration.Presently NRC Senior Research Associate at NOAA, Space Environment Laboratory, Boulder, Colorado, U.S.A.At the NASA National Space Data Center. 相似文献
18.
Regarding new bipolar magnetic regions as sources of flux, we have computed the evolution of the photospheric magnetic field during 1976–1984 and derived the corresponding evolution of the mean line-of-sight field as seen from Earth. We obtained a good, but imperfect, agreement between the observed mean field and the field computed for a nominal choice of flux transport parameters. Also, we determined the response of the computed mean field to variations in the transport parameters and the source properties. The results lead us to regard the mean-field evolution as a random-walk process with dissipation. New eruptions of flux produce the random walk, and together differential rotation, meridional flow (if present), and diffusion provide the dissipation. The net effect of each new source depends on its strength and orientation (relative to the strength and orientation of the mean field) and on the time elapsed before the next eruption (relative to the decay time of the field). Thus the mean field evolves principally due to the contributions of the larger sources, which produce a strong, gradually evolving field near sunspot maximum but a weak, sporadically evolving field near sunspot minimum.E. O. Hulburt Center for Space Research.Laboratory for Computational Physics. 相似文献
19.
Solar coronal mass ejections (CMEs) show a large variety in their kinematic properties. CMEs originating in active regions and accompanied by strong flares are usually faster and accelerated more impulsively than CMEs associated with filament eruptions outside active regions and weak flares. It has been proposed more than two decades ago that there are two separate types of CMEs, fast (impulsive) CMEs and slow (gradual) CMEs. However, this concept may not be valid, since the large data sets acquired in recent years do not show two distinct peaks in the CME velocity distribution and reveal that both fast and slow CMEs can be accompanied by both weak and strong flares. We present numerical simulations which confirm our earlier analytical result that a flux‐rope CME model permits describing fast and slow CMEs in a unified manner. We consider a force‐free coronal magnetic flux rope embedded in the potential field of model bipolar and quadrupolar active regions. The eruption is driven by the torus instability which occurs if the field overlying the flux rope decreases sufficiently rapidly with height. The acceleration profile depends on the steepness of this field decrease, corresponding to fast CMEs for rapid decrease, as is typical of active regions, and to slow CMEs for gentle decrease, as is typical of the quiet Sun. Complex (quadrupolar) active regions lead to the fastest CMEs. (© 2007 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim) 相似文献
20.
Yun-Chun Jiang Yuan-Deng Shen Jing-Xiu Wang National Astronomical Observatories / Yunnan Observatory Chinese Academy of Sciences Kunming National Astronomical Observatories Chinese Academy of Sciences Beijing 《中国天文和天体物理学报》2007,7(1):129-140
1 INTRODUCTION Filaments are cool, dense material suspended in the hot, tenuous corona. It is widely accepted that the global magnetic field surrounding the filaments plays a key role in their formation, structure and stability (Tandberg-Hanssen1995). Fil… 相似文献