首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
On 21 March 2008, an Ms7.3 earthquake occurred at Yutian County, Xinjiang Uygur Autonomous Region, which is in the same year as 2008 Mw 7.9 Wenchuan earthquake. These two earthquakes both took place in the Bayar Har block, while Yutian earthquake is located in the west edge and Wenchuan earthquake is in the east. The research on source characteristics of Yutian earthquake can serve to better understand Wenchuan earthquake mechanism. We attempt to reveal the features of the causative fault of Yutian shock and its co-seismic deformation field by a sensitivity-based iterative fitting (SBIF) method. Our work is based on analysis and interpretation to high-resolution satellite (Quickbird) images as well as D-InSAR data from the satellite Envisat ASAR, in conjunction with the analysis of seismicity, focal mechanism solutions and active tectonics in this region. The result shows that the 22 km long, nearly NS trending surface rupture zone by this event lies on a range-front alluvial platform in the Qira County. It is characterized by distinct linear traces and a simple structure with 1–3 m-wide individual seams and maximum 6.5 m width of a collapse fracture. Along the rupture zone are seen many secondary fractures and fault-bounded blocks by collapse, exhibiting remarkable extension. The co-seismic deformation affected a big range 100 km × 40 km. D-InSAR analysis indicates that the interferometric deformation field is dominated by extensional faulting with a small strike-slip component. Along the causative fault, the western wall fell down and the eastern wall, that is the active unit, rose up, both with westerly vergence. The maximum subsidence displacement is ～2.6 m in the LOS, and the maximum uplift is 1.2 m. The maximum relative vertical dislocation reaches 4.1 m, which is 10 km distant from the starting rupture point to south. The 42 km-long seismogenic fault in the subsurface extends in NS direction as an arc, and it dipping angle changes from 70° near the surface to 52° at depth ～10 km. The slip on the fault plane is concentrated in the depth range 0–8 km, forming a belt of length 30 km along strike on the fault plane. There are three areas of concentrating slip, in which the largest slip is 10.5 m located at the area 10 km distant from the initial point of the rupture.  相似文献   

2.
The rupture process of the disastrous Sumatra–Andaman earthquake of 26 December 2004 was analyzed by array processes for teleseismic P-waves recorded by a dense broadband seismic array in Taiwan with epicentral distances of close to 31°. The azimuthal variation from the BATS array center to both ends of the rupture fault is approximately 21°, which is larger than that reported previously for seismic arrays used to image the rupture process of this earthquake, thereby providing a high spatial resolution in studying the source rupture behavior. Two array-processing methods were used to analyze teleseismic P-wave trains. Both analyses were based on data recorded by a broadband network, covering a region of 200 × 400 km, with the aim of evaluating the rupture behavior of the earthquake. Consistent results from both analyses indicate that the earthquake had a rupture duration exceeding 500 s, with major asperities encountered at 80, 260, and 330 s after the initiation of rupturing. We traced the ruptured fault for more than 1200 km from the point of initial rupture. The average rupture velocity was approximately 3.0 km/s and the major northward rupture propagation began at 80 s after the initiation of rupturing.  相似文献   

3.
A consistent methodology based on the critical state framework to characterize the different regimes of fine-grained soil behavior under earthquake loads is put forward. Shear strength and deformation behavior of soils depend in a major way on the combination of volume and confining stress. Depending on their combination, a soil aggregate may fracture into clastic debris, fail with fault planes, or yield plastically. This characterization of the class of limiting soil behavior is used to analyze the potential for large deformation and liquefaction in fine grained soils. The central piece of the proposed characterization is the (η, LI5) stability diagram where η = q/p′ and LI5 = LI + 0.5 log (p′/5). This diagram captures the effects of soil plasticity through liquidity index LI, confinement through mean normal effective stress p′, and shear stress q through the stress ratio η. The three regions of behavior; fracture, fault, and fold/yield are identified. Soils become susceptible to liquefaction when they shift into the fracture zone (LI5 ≤ 0.4), or if they plot outside of the stable yielding region.Under earthquake loading, the initial soil states will migrate into different regions in the stability diagram depending on their initial location, shear stress increment, and, pore pressure response. The final position of the soil state would dictate the type of limiting behavior expected in the field; fracture, rupture or yield. The final states which fall into the fracture region have the potential for catastrophic failures including “liquefaction”; the ones which fall onto the rupture region would experience the attainment of a peak stress ratio followed by softening along failure planes; the ones in the yield region would continue to yield in a stable manner. The latter two types of deformations while resulting in large deformation may not be of a catastrophic nature. The proposed characterization is used to examine the liquefaction susceptibility of fine grained soils from China, Taiwan, and Turkey. Use of simplified empirical criteria based on parameters such as plasticity index and fines contents may not capture the true nature of the type of undrained limiting behavior of fine grains soils in the field including liquefaction.  相似文献   

4.
This study analyzed the rupture directivity of the 2011 Tohoku earthquake by using 100-s Rayleigh-wave travel-times, influenced by the finite source, to derive the fault parameters of the earthquake. The results demonstrated that the earthquake exhibited a slow rupture propagation with a rupture velocity of approximately 1.5–2.0 km/s and asymmetric bilateral faulting. The two rupture directions were N60°E and N127°E, with rupture lengths of approximately 276 km and 231 km, respectively. The rupture toward N60°E had a source duration of approximately 183 s, longer than that toward N127°E (approximately 156 s). Overall, the entire source duration of the earthquake faulting lasted approximately 183 s. Regarding historical seismicity in eastern Japan, the 2011 Tohoku earthquake not only ruptured a locked area in which large earthquakes have rarely occurred, but also ruptured the source regions of several historical earthquakes. With the exception of its slow rupture velocity and generation of a tsunami, the rupture features of the 2011 Tohoku earthquake were inconsistent with those of typical tsunami earthquakes.  相似文献   

5.
The 12 May 2008 Ms 8.0 Wenchuan earthquake, China, was one of largest continental thrusting events worldwide. Based on interpretations of post-earthquake high-resolution remote sensing images and field surveys, we investigated the geometry, geomorphology, and kinematics of co-seismic surface ruptures, as well as seismic and geologic hazards along the Longmen Shan fold-and-thrust belt. Our results indicate that the Wenchuan earthquake occurred along the NE–SW-trending Yingxiu–Beichuan and Guanxian–Anxian faults in the Longmen Shan fold-and-thrust belt. The main surface rupture zones along the Yingxiu–Beichuan and Guanxian–Anxian fault zones are approximately 235 and 72 km in length, respectively. These sub-parallel ruptures may merge at depth. The Yingxiu–Donghekou surface rupture zone can be divided into four segments separated by discontinuities that appear as step-overs or bends in map view. Surface deformation is characterized by oblique reverse faulting with a maximum vertical displacement of approximately 10 m in areas around Beichuan County. Earthquake-related disasters (e.g., landslides) are linearly distributed along the surface rupture zones and associated river valleys.The Wenchuan earthquake provides new insights into the nature of mountain building within the Longmen Shan, eastern Tibetan Plateau. The total crustal shortening accommodated by this great earthquake was as much as 8.5 m, with a maximum vertical uplift of approximately 10 m. The present results suggest that ongoing mountain building of the Longmen Shan is driven mainly by crustal shortening and uplift related to repeated large seismic events such as the 2008 Wenchuan earthquake. Furthermore, rapid erosion within the Longmen Shan fold-and-thrust belt occurs along deep valleys and rupture zones following the occurrence of large-scale landslides triggered by earthquakes. Consequently, we suggest that crustal shortening related to repeated great seismic events, together with isostatic rebound induced by rapid erosion-related unloading, is a key component of the geodynamics that drive ongoing mountain building on the eastern Tibetan Plateau.  相似文献   

6.
The kinematic rupture process of the 2011 Tohoku-Oki earthquake (Mw 9.0) was derived given apparent source time functions (ASTFs) retrieved from Rayleigh waves using a refined homomorphic deconvolution method. The total duration of the rupture process was about 165 s. Three slip-concentrated areas were identified based on images of static slip distribution. The largest asperity, located up-dip from the hypocenter with an area of 250 km × 110 km extending to the trench on the fault, had a maximum slip of about 54 m. The other asperities with smaller slip down-dip from the hypocenter were centered on the north and south of the hypocenter, respectively. The preferred average rupture expansion velocity was 1.2 km/s within 130 km from the hypocenter and up to 2.3 km/s over other areas on the fault. Thus, the region near the vicinity of the hypocenter with lower rupture velocity had higher slip amplitude, strongly suggesting brittle failure on a high friction fault. Based on ASTF results, our proposed method offers another way of directly detecting the kinematic source parameters of earthquakes.  相似文献   

7.
The May 12, 2008, Mw 7.9 Wenchuan earthquake was induced by failure of two of the major faults of the Longmen Shan thrust fault zone along the eastern margin of Tibet Plateau. Our study focused on trenches across the Yingxiu–Bichuan fault, the central fault in the Longmen Shan belt that has a coseismic surface break of more than 200 km long. Trenching excavation across the 2008 earthquake rupture on three representative sites reveals the styles and amounts of the deformation and paleoseismicity along the Longmen Shan fault. Styles of coseismic deformation along the 2008 earthquake rupture at these three sites represent three models of deformation along a thrust fault. Two of the three trench exposures reveal one pre-2008 earthquake event, which is coincident with the pre-existing scarps. Based on the observation of exposed stratigraphy and structures in the trenches and the geomorphic expressions on ground surface, we interpret the 2008 earthquake as a characteristic earthquake along this fault. The interval of reoccurrence of large earthquake events on the Central Longmen Shan fault (the Yingxiu–Beichuan fault) can be inferred to be about 11,000 years according to 14C and OSL dating. The amounts of the vertical displacement and shortening across the surface rupture during the 2008 earthquake are determined to be 1.0–2.8 m and 0.15–1.32 m, respectively. The shortening rate and uplift rate are then estimated to be 0.09–0.12 mm/yr and 0.18–0.2 mm/yr, respectively. It is indicated that the deformation is absorbed mainly not by shortening, but by uplift along the rupture during the 2008 earthquake.  相似文献   

8.
The Jiashian earthquake (ML 6.4) occurred on 4 March 2010. It was the largest inland event in southern Taiwan of 2010. The mainshock location was unexpected since it occurred in an area with relatively low background seismicity. In addition, reports of earthquake focal mechanisms do not fit with any known active fault geometry. In order to understand the origin of this earthquake, especially its rupture process, we perform a joint source inversion by using teleseismic body wave, GPS coseismic displacements and near field ground motion data. In this study, we considered a northwest–southeast trending fault with a northeast dip retrieved from GPS coseismic data and aftershocks distribution. To analyze the detailed slip distribution in space and time, we used near field 3D Green’s functions provided by spectral-element method and a full time–space inversion technique. We find a complex rupture process with several slip patches distributed inside two main asperities. The slip map reveals a mean slip of 12.9 cm for a maximum slip of 27.3 cm leading to a Mw 6.47 for this event. The rupture initiates in the deepest portion of the fault at 20 km depth, and propagated upward up to 2 km depth to form the two asperities. The source time function of this event revealed two pulses corresponding to the two asperities, for a total duration time of about 16 s. Most aftershocks occurred near the upper boundary of the deepest asperity while no aftershocks are located close to the shallowest one. We infer that the locations of these slip patches are related to the surrounding fault systems that may have restricted the rupture propagation during the earthquake.  相似文献   

9.
To investigate subsurface structure and seismogenic layers, 3D velocity inversion was carried out in the source zone of 1905 Kangra earthquake (M8.0) in the northwestern Himalaya. P-wave and S-wave phase data of 159 earthquakes recorded by a network of 21 stations were used for this purpose. Inverted velocity tomograms up to a depth range of 18 km show significant variations of 14% in Vp and Vs and 6% in the Vp/Vs across the major tectonic zones in the region. Synthesis of seismicity pattern, velocity structure, distinctive focal mechanisms coupled with nature of stress distribution allows mapping of three different source regions that control regional seismotectonics. Accumulating strains are partly consumed by sliding of Chamba Nappe to the southwest through reverse-fault movements along Chamba/Panjal/Main Boundary Thrusts. This coupled with normal-fault type displacements along Chenab Normal Fault in the north account for low magnitude widespread seismicity in upper 8–10 km of the crust. At intermediate depths from 8 to 15 km, adjusting to residual compressive stresses, the detachment or lower end of the MBT slips to produce thrust dominated seismicity. Nucleation of secondary stresses in local NE–SW oriented structure interacts in complex manner with regional stresses to generate normal type earthquakes below the plane of detachment and therefore three seismic regimes at different depths produce intense seismicity in a block of 30 × 30 km2 centered NE to the epicenter of Kangra earthquake.  相似文献   

10.
The 2001 Bhuj earthquake (Mw 7.6) source zone is examined in the light of crack density (ε), saturation rate (ξ) and porosity parameter (ψ) using new data set derived from a large aftershock sequence recorded by the Gujarat seismic network (GSNet) during November, 2006–December, 2009. Processes of rupture initiations of the mainshock and its aftershock sequence are better understood by synthesizing the dynamic snapshots of the source zone using the new dataset. Pattern of crustal heterogeneities associated with high-ε, high-ξ and high-ψ anomalies at depths varying from 20 km to 25 km is similar to those of earlier study by Mishra and Zhao (2003). The anomalous zone is found extended distinctly by 50–60 km in the lateral direction, indicating the reinforcement of cracks and fractured volume of rock matrix due to long aftershock sequence since 2001 Bhuj earthquake in the source area. It is inferred that the presence of a fluid-filled fractured rock matrix with super saturation may have affected the structural and seismogenic strengths of the source zone and is still contributing significantly to the geneses of earthquakes in and around the source zone. Anomalous pattern of high-ε with wider distribution of high-ξ indicates the existence of micro-cracks in the lower crust, while high-ψ suggests the cementation of cracks through permeation of residual magma/metamorphic fluids into the hypocenter zone. The results suggest that the existence of residual fluids in the fractured rock matrix in the mid to lower crust might have played a key role in triggering the 2001 mainshock and is still responsible for its continued long aftershock sequences.  相似文献   

11.
We perform 3D modeling of earthquake generation of the Xianshuihe fault, southwestern China, which is a highly active strike-slip fault with a length of about 350 km, in order to understand earthquake cycles and segmentations for a long-term forecasting and earthquake nucleation process for a short-term forecasting. Historical earthquake data over the last 300 years indicates repeated periods of seismic activity, and migration of large earthquake along the fault during active seismic periods. To develop the 3D model of earthquake cycles along the Xianshuihe fault, we use a rate- and state-dependent friction law. After analyzing the result, we find that the earthquakes occur in the reoccurrence intervals of 400–500 years. Simulation result of slip velocity distribution along the fault at the depth of 10 km during 2694 years along the Xianshuihe fault indicates that since the third earthquake cycle, the fault has been divided into 3 parts. Some earthquake ruptures terminate at the bending part of the fault line, which may means the shape of the fault line controls how earthquake ruptures. The change of slip velocity and displacement at 10 km depth is more tremendous than the change of the shallow and deep part of the fault and the largest slip velocity occurs at the depth of 10 km which is the exact depth of the seismic zone where fast rupture occurs.  相似文献   

12.
Alexis Rigo 《Tectonophysics》2010,480(1-4):109-118
Earthquake precursors are now regularly described but often detected only after a major or moderate seismic event. Presence and influence of fluids in the seismogenic processes are often observed at the time of earthquake studies. Even today, the understanding of the physical processes involved in the source region is a real challenge for seismic hazard assessment. Here, the aftershock sequence of the ML = 5.2, 1996 Saint-Paul-de-Fenouillet (Eastern Pyrenees, France) earthquake is first re-examined with P-wave cross-correlations, resulting in extracting three multiplets and in determining new locations. Multiplets and spatio-temporal distribution analysis of the aftershocks allow for quantifying the hydraulic diffusivity D at a maximum value of 5 m2/s and the permeability K at 10? 15 m2 in the upper Pyrenean crust. Second, a model is established in order to explain the hydrogeochemical transient anomalies, which occurred during the 15 day-period preceding the 1996 earthquake. These anomalies consist on a temporal and spatial sequence of gas emissions in the epicentral area and on chloride and lead concentration variations in a bottled mineral water 25 km north to the main shock epicenter. The proposed model processed in a standard elastic half-space, consists of creep on a low-angle crustal normal-fault, generating volumetric strain field changes over a distance of 25 km from the epicentral area. This model is able to constrain not only the mechanisms and the locations of the geochemical anomalies, but also their timing and probable casual links to the triggering of the impending major event. Also, the active extension proposed here is compatible with seismological observations in the Pyrenees. Thus, the possibility of such creep, which can be considered as a slow-slip event, is discussed in the Pyrenean tectonic and geological context. The model is discussed and compared to previous proposed models on precursor processes of earthquakes, especially concerning the preparation zone concept. Finally, a complete seismic scenario over the period beginning 15 days before the quake and ending 5 days after is proposed and discussed.  相似文献   

13.
The catastrophic earthquakes that recently (September 4th, 2010 and February 22nd, 2011) hit Christchurch, New Zealand, show that active faults, capable of generating large-magnitude earthquakes, can be hidden beneath the Earth’s surface. In this article we combine near-surface paleoseismic data with deep (<5 km) onshore seismic-reflection lines to explore the growth of normal faults over short (<27 kyr) and long (>1 Ma) timescales in the Taranaki Rift, New Zealand. Our analysis shows that the integration of different timescale datasets provides a basis for identifying active faults not observed at the ground surface, estimating maximum fault-rupture lengths, inferring maximum short-term displacement rates and improving earthquake hazard assessment. We find that fault displacement rates become increasingly irregular (both faster and slower) on shorter timescales, leading to incomplete sampling of the active-fault population. Surface traces have been recognised for <50% of the active faults and along ≤50% of their lengths. The similarity of along-strike displacement profiles for short and long time intervals suggests that fault lengths and maximum single-event displacements have not changed over the last 3.6 Ma. Therefore, rate changes are likely to reflect temporal adjustments in earthquake recurrence intervals due to fault interactions and associated migration of earthquake activity within the rift.  相似文献   

14.
Northeast China, a densely populated area, is affected by intense seismic activity, which includes large events that caused extensive disaster and tremendous loss of life. For contributing to the continuous efforts for seismic hazard assessment, the earthquake potential from the active faults near the cities of Zhangjiakou and Langfang in Hebei Province is examined. We estimate the effect of the coseismic stress changes of strong (M ⩾ 5.0) earthquakes on the major regional active faults, and mapped Coulomb stress change onto these target faults. More importantly our calculations reveal that positive stress changes caused by the largest events of the 1976 Tangshan sequence make the Xiadian and part of Daxing fault, thus considered the most likely sites of the next strong earthquake in the study area. The accumulated static stress changes that reached a value of up to 0.4 bar onto these faults, were subsequently incorporated in earthquake probability estimates for the next 30 years.  相似文献   

15.
Some 455 events (mb ⩾ 4.5) in the Indo-Myanmar subduction zone are compiled using the ISC/EHB/NEIC catalogues (1964–2011) for a systematic study of seismic precursors, b-value and swarm activity. Temporal variation of b-value is studied using the maximum likelihood method beside CUSUM algorithm. The b-values vary from 0.95 to 1.4 for the deeper (depth ⩾60 km) earthquakes, and from 0.85 to 1.3 for the shallower (depth <60 km) earthquakes. A sudden drop in the b-value, from 1.4 to 0.9, prior to the occurrence of larger earthquake(s) at the deeper depth is observed. It is also noted that the CUSUM gradient reversed before the occurrence of larger earthquakes. We further examined the seismicity pattern for the period 1988–1995 within a radius of 150 km around the epicentre (latitude: 24.96°N; longitude: 95.30°E) of a deeper event M 6.3 of May 6, 1995 in this subduction zone. A precursory swarm during January 1989 to July 1992 and quiescence during August 1992 to April 1995 are identified before this large earthquake. These observations are encouraging to monitor seismic precursors for the deeper events in this subduction zone.  相似文献   

16.
We present new constraints on an active low-angle normal fault system in the Città di Castello–Sansepolcro basin (CSB) of the northern Apennines of Italy. New field data from the geological survey of the Carta Geologica d'Italia (CARG project) define the surface geometry of the normal fault system and lead to an interpretation of the CROP 03 deep-crust seismic reflection profile (Castiglion Fiorentino–Urbania segment), with particular attention paid to the geometry of the Plio-Quaternary extensional structures. Surface and sub-surface geological data are integrated with instrumental and historical seismicity in order to define the seismotectonics of the area.Low-angle east-dipping reflectors are the seismic expression of the well-known Altotiberina Fault (AF), a regional extensional detachment on which both east- and west-dipping high-angle faults, bounding the CSB, sole out. The AF breakaway zone is located ～ 10 km west of the CSB. Within the extensional allochthon, synthetic east-dipping planes prevail. Displacement along the AF is ～ 4.5 km, which agrees with the cumulative offset due to its synthetic splays. The evolution of the CSB has mainly been controlled by the east-dipping fault system, at least since Early Pleistocene time; this system is still active and responsible for the seismicity of the area. A low level of seismic activity was recorded instrumentally within the CSB, but several damaging earthquakes have occurred in historical times. The instrumental seismicity and the intensity data points of the largest historical earthquakes (5 events with maximum MCS intensity of IX to IX–X) allow us to propose two main seismogenic structures: the Monte Santa Maria Tiberina (Mmax = 5.9) and Città di Castello (Mmax up to 6.5) normal faults. Both are synthetic splays of the AF detachment, dipping to the NE at moderate (45–50°) to low (25–30°) angles and cutting the upper crust up to the surface. This study suggests that low-angle normal faults (at least with dips of 25–30°) may be seismogenic.  相似文献   

17.
《Quaternary Science Reviews》2005,24(12-13):1479-1498
Multiple peat-silt couplets preserved in tidal marsh sediment sequences suggest that numerous great plate boundary earthquakes caused the coast around Cook Inlet, Alaska, to subside over the past 3500 years. Field and laboratory analyses of the two youngest couplets record the well-documented earthquake of AD 1964 and the penultimate one, approximately 850 cal yr BP. Diatom assemblages from a range of modern day estuarine environments from tidal flat through salt marsh to acidic bog produce quantitative diatom transfer function models for elevation reconstructions based on fossil samples. Only nine out of 124 fossil assemblages analysed, including previously published data for the AD 1964 earthquake, have a poor modern analogue. Calibration of fossil samples indicate co-seismic subsidence of 1.50±0.32 m for AD 1964, similar to measurements taken after the earthquake, and 1.45±0.34 m for the ∼850 cal yr BP earthquake. Elevation standard errors for individual fossil samples range from ∼0.08 m in peat layers to ∼0.35 m in silt units. Lack of a chronology within fossil silt units prevents identification of changes in the rate of recovery and land uplift between the post-seismic and inter-seismic periods. However, preservation of multiple peat-silt couplets indicates no net emergence over multiple earthquake cycles. Glacio-isostatic movements from Little Ice Age glacier advance and retreat explains a ∼0.15 m relative sea-level oscillation recorded within the peat layer subsequently submerged as a result of the AD 1964 earthquake. Before both this and the ∼850 cal yr BP earthquake, diatom assemblages suggest pre-seismic relative sea-level rise of ∼0.12±0.13 m, representing possible precursors to great earthquakes.  相似文献   

18.
The Longquan–Shan fault and the Huya fault are two major neighboring faults of the Longmen–Shan fault zone where the 12 May 2008 Wenchuan earthquake (Mw 7.9) occurred. To study the influence of the Wenchuan event on these two active faults, we calculate changes of Coulomb stress on the Longquan–Shan fault and the Huya fault caused by the Wenchuan mainshock. Our results indicate that the Coulomb stress in the northern section (Zone A) of the Longquan–Shan fault is increased by 0.07–0.10 bars, that in the middle section (Zone B) by 0.04–0.11 bars, and that in the southern section (Zone C) shows almost no change. For the Huya fault, the Coulomb stress is decreased by 0.01–0.03 bars in the northern section (Zone A), 0.10–0.35 bars in the middle section (Zone B), and nearly 0.5 bars in the southern section (Zone C). The epicenter distribution of small earthquakes (ML ⩾ 1.5) on the Longquan–Shan fault and the Huya fault after the Wenchuan earthquake is consistent with the distribution of the Coulomb stress change. This implies that the Wenchuan earthquake may have triggered small events on the Longquan–Shan fault, but inhibited those on the Huya fault. We then use the rate/state friction law to calculate the occurrence probability of future earthquakes in the study region for the next decade. They include the distribution of b-values, magnitude of completeness (Mc), the background seismicity rate, a value of Aσn and the duration for the transient effect (ta) in the study region. We also estimate the earthquake occurrence probabilities on the neighboring faults after the Wenchuan earthquake. Our results show that, the occurrence probability of future earthquakes in the Longquan–Shan has a slight increase, being 7% for M ⩾ 5.0 shocks during the next decade, but the earthquake probability in the Huya region is reduced obviously, being 5–20%, 7–26% and 3–9% for M ⩾ 5.0 shocks during the next decade in sections A, B and C of the Huya fault, respectively.  相似文献   

19.
The city of Izmir, located at the western end of Turkey, has experienced many strong earthquakes throughout its history. The southern coast of Izmir Bay, one of the most densely populated areas of Izmir, is located on deep alluvial sediments. It is important to determine the effect of local soil conditions on dynamic ground response in the study area, where thick loose water-saturated alluvial sediments exist. A database including geotechnical and geological information on the study area is constructed. Majority of the site is classified as D and E according to NEHRP provisions. Dynamic site response analyses are performed with EERA by utilizing the field and laboratory test results and earthquake time histories of moderate-scale earthquakes such as 1977 Izmir (ML = 5.3), 2003 Urla (Md = 5.6), and 2005 Uzunkuyu-Urla (ML = 5.9), which occurred in and nearby Izmir. In addition, a scenario ground motion generated by the Izmir Fault with a magnitude of 6.5, having an average distance of 10 km to the study area, is also considered. The output data obtained from the dynamic site response analyses are evaluated, and maps displaying variation in dynamic parameters on ground surface are prepared for the southern coast of Izmir Bay, Turkey. Consequently, the dynamic analyses performed with the soil models constituted for the study area verified the damage occurred in a close distance event of 1977 Izmir earthquake. The scenario earthquake resulted in peak ground accelerations more than 0.6 g at the eastern and western ends of the study area. However, long distance events resulted in spectral amplifications by up to 5 times. With this study, it is emphasized that local soil conditions should be evaluated individually in the area of interest. Generation of a site-specific design spectrum is recommended for the areas located on deep alluvial sediments.  相似文献   

20.
Gravity and magnetic analysis provide an opportunity to deduce and understand to a large extent the stratigraphy, structure and shape of the substructure. Euler deconvolution is a useful tool for providing estimates of the localities and depth of magnetic and gravity sources. Wavelet analysis is an interesting tool for filtering and improving geophysical data. The application of these two methods to gravity and magnetic data of the Liberia Basin enable the definition of the geometry and depth of the subsurface geologic structures. The study reveals the basin is sub-divided and the depth to basement of the basin structure ranges from about 5 km at its North West end to 10 km at its broadest section eastward. Magnetic data analysis indicates shallow intrusives ranging from a depth of 0.09 km to 0.42 km with an average depth of 0.25 km along the margin. Other intrusives can be found at average depths of 0.6 km and 1.7 km respectively within the confines of the basin. An analysis of the gravity data indicated deep faults intersecting the transform zone.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号