共查询到20条相似文献，搜索用时 28 毫秒
1.
Sung-Ryul Kim Oh-Soon Kwon Myoung-Mo Kim 《Soil Dynamics and Earthquake Engineering》2004,24(11):853-866
In the analysis of the seismic stability of gravity type quay walls, the magnitudes of force components acting on quay walls during earthquakes and the phase relationships among these force components must be properly evaluated. In general, the force components include inertia force of the wall, lateral earth force, and water force. The magnitude and the phase relationship of each force component vary with time, and are largely affected by the magnitude of excess pore pressure developed in the backfill soil of the quay wall. The dynamic thrust develops at the contact surface between the backfill soil and the wall as a result of the interaction among these force components. In this study, a simple model is proposed to evaluate the magnitude and the phase variation of the dynamic thrust on the back of the wall. The proposed model computes the dynamic thrust by using the force components calculated from existing equations. We verified the proposed model by comparing its results with those obtained from a series of shaking table tests. 相似文献
2.
Amirali Mostafavi Moghadam Abbas Ghalandarzadeh Majid Moradi Ikuo Towhata Pouria Hajialikhani 《Bulletin of Earthquake Engineering》2011,9(4):1259-1288
This research is to study the efficiency of displacement reducer fuses, installed behind the caisson quay walls for controlling
the dynamic backfill thrust and minimizing the displacement, settlement and tilting of the walls. For this purpose, two types
of fuses, Displacement Reducer Panels (DRP) and Displacement Reducer Elements (DRE), were constructed and installed behind
the wall. The DRPs were constructed by hollow Polypropylene sheets to reproduce elastoplastic and plastic mechanical behaviors.
The DREs were cylindrical stainless-steel dampers, working upon friction mechanism that can reproduce perfect plastic behavior.
Here, two series of shaking table 1-g tests were performed with DRP and DRE applications. In this regard, different mechanical
behaviors and capacities were considered for fuses against demand thrusts of backfill in order to compare the mitigation tests
with no-mitigation cases. Harmonic base motions with constant amplitude and constant frequency were used in the model test.
The foundation soil and the backfill soil were constructed with the relative densities of 85 and 25%, respectively, to reproduce
non-liquefiable base layer and loose backfill situations in the model, respectively. The results showed remarkable reduction
in kinetic energy, dynamic backfill thrust and consequently seaward movement, settlement and inclination of the caisson quay
wall in case of using fuses with plastic behaviors behind the wall. 相似文献
3.
Static and dynamic behavior of hunchbacked gravity quay walls 总被引：2，自引：0，他引：2
Abouzar Sadrekarimi Abbas Ghalandarzadeh Jamshid Sadrekarimi 《Soil Dynamics and Earthquake Engineering》2008,28(2):99-117
One of the parameters that can affect the lateral pressures behind a retaining wall is the back-face shape of the wall, which can be controlled by the designer, and has not been investigated experimentally. Therefore, in order to study this behavior, a set of 1g shaking table tests was carried out on hunched back gravity type quay walls made of concrete blocks. Crushed stone and silica sand were used in the backfill and subsoil, respectively. The subsoil was prepared by moist tamping. The models were fully instrumented and beside each earth pressure transducer a pore water pressure sensor was also installed behind the wall therefore the lateral effective stress acting on the wall could be calculated. Tests were performed with various base accelerations on models with different subsoil relative densities. The results show that the earth pressure increases at upper portions of the wall and decreases by the leaning slope at lower elevations. Depending on the back-face shape of the wall the total thrust and overturning moment would be increased or decreased after an earthquake. However, the hunched back-shape of the wall tends to raise the point of application of the total thrust exerted on the wall. Other advantages of hunched back walls are demonstrated as well. 相似文献
4.
An overview of past and recent developments on the subject of seismic earth pressures on yielding, gravity-type walls, retaining cohesionless backfill, is first presented, focusing on available data on the issue of phase difference that develops between the peak values of wall inertia and seismic earth thrust increment. The results of a FEM parametric study are next presented regarding the dependence on the resulting dynamic earth thrust reduction – acting on the time of peak wall inertia – on backfill rigidity, wall height, and shaking characteristics. The reliability of the numerical analyses was verified by modeling centrifuge tests reported by Nakamura [24] and successfully comparing measured vs. computed behavior. The results of the parametric analyses indicate that the seismic active earth thrust, acting on the wall at the time of maximum wall inertia, is significantly reduced (compared to its peak value) with increasing shaking intensity of backfill, increasing wall displacements, increasing wall height, and decreasing backfill rigidity. No systematic dependence on the ratio of input motion frequency to the natural frequency of the backfill (f/f1) was observed. The above findings: (1) verify earlier experimental and numerical results, (2) explain the reported lack of damage to retaining walls under strong ground shaking, and (3) indicate the need for revising the pertinent provisions of current seismic codes. Graphs summarizing the results of the numerical analyses are presented which may be used as a guide for selecting the magnitude of seismic active earth thrust that needs to be taken into account in the design of the examined type of earth retaining walls. 相似文献
5.
This paper presents experimental results of a series of 1g shake table tests on mitigation measures for a model consisting of a 3×3 pile group and a sheet-pile quay wall in which the pile group was subjected to liquefaction-induced lateral spreading. First, general observations associated with the mechanism of lateral spreading and pile response are presented based on tests without remedial measures, followed by in depth discussions. Second, three remedial techniques were deployed to provide an adequate seismic performance of the pile group and the quay wall: (i) mitigating sheet pile of floating type, (ii) mitigating sheet pile of fixed end type, and (iii) anchoring the quay wall to a new pile row. The main objective of these mitigation methods was to restrict ground distortion behind the quay wall, enhancing seismic response of pile group and quay wall. This mitigation philosophy was decided based on the outcome of the first part, which consisted of a series of tests without mitigation measures. In addition, it should be noted that the proposed countermeasures were selected to be applicable for existing vulnerable pile groups, which are at risk of liquefaction and lateral spreading. Results of different mitigation tests are comparatively examined using a parameter called reduction factor, and the effectiveness of each countermeasure is discussed in detail. The results demonstrate that by applying the proposed mitigation measures the seismic performance of both pile group and quay wall can be improved, as a result of reduction in soil displacement and velocity of soil flow. 相似文献
6.
7.
R. Uzuoka M. Cubrinovski H. Sugita M. Sato K. Tokimatsu N. Sento M. Kazama F. Zhang A. Yashima F. Oka 《Soil Dynamics and Earthquake Engineering》2008,28(6):436-452
The 1995 Kobe earthquake seriously damaged numerous buildings with pile foundations adjacent to quay walls. The seismic behavior of a pile group is affected by movement of quay walls, pile foundations, and liquefied backfill soil. For such cases, a three-dimensional (3-D) soil–water coupled dynamic analysis is a promising tool to predict overall behavior. We report predictions of large shake table test results to validate 3-D soil–water coupled dynamic analyses, and we discuss liquefaction-induced earth pressure on a pile group during the shaking in the direction perpendicular to ground flow. Numerical analyses predicted the peak displacement of footing and peak bending moment of the group pile. The earth pressure on the pile in the crustal layer is most important for the evaluation of the peak bending moment along the piles. In addition, the larger curvatures in the bending moment distribution along the piles at the water side in the liquefied ground were measured and predicted. 相似文献
8.
The earthquake response of cantilever retaining walls is explored by means of theoretical analyses and shaking table testing conducted at University of Bristol (EERC - EQUALS). The theoretical investigations employ both limit analysis and wave-propagation methods, which take into account different aspects of the problem such as inertia, strength, kinematics and compatibility of deformations. The experimental programme encompasses different combinations of retaining wall geometries, soil configurations and input ground motions. The response analysis of the systems at hand aims at shedding light onto salient features of the problem, such as: (1) the magnitude of soil thrust and its point of application; (2) the relative sliding versus rocking of the wall base and the corresponding failure modes; (3) the importance of the interplay between soil stiffness, wall dimensions and excitation characteristics, as affecting the above; (4) the importance of wall dynamics and phase differences between peak stresses and displacements. The results of the experimental investigations are in good agreement with the theoretical models and provide a better understanding on the complex mechanics of the problem. 相似文献
9.
采用ABAQUS建立12层剪力墙结构的有限元模型,利用该结构1/5缩尺模型振动台试验时预留试块的材性试验结果及相似关系,确定相应原型结构材料的性能参数,将试验参数和我国混凝土结构设计规范给出的混凝土单轴受拉/压应力-应变关系曲线相结合,确定ABAQUS模型中混凝土损伤塑性模型所需的应力-应变参数;将试验参数和张劲公式法相结合,确定ABAQUS模型中混凝土损伤塑性模型所需的损伤因子参数。对比有限元分析结果和振动台试验结果,验证参数设置的有效性。ABAQUS有限元分析和振动台试验所得原型结构前三阶振型和自振周期相差很小,说明ABAQUS模型和参数设置能够反映并用于计算实际结构的弹性响应。ABAQUS有限元分析得到的结构损伤情况与试验模型的损伤情况基本一致;结构的顶点加速度曲线和滞回曲线等响应的有限元分析结果与试验结果在多遇地震作用下基本吻合,但由于振动台试验累积损伤的影响,两者的差异随着地震波幅值的增大而逐渐增大;ABAQUS有限元分析得到的位移包络曲线与剪力墙结构弯曲变形的特点相符。以上弹塑性分析结果进一步表明了ABAQUS模型和参数设置能够很好地模拟结构在地震作用下的响应。 相似文献
10.
In the last 50 years, there have been many incidences of failure of gravity quay walls. These failures are often associated with significant deformation of liquefiable soil deposits. Gravity quay wall failures have stimulated great progress in the development of deformation-based design methods for geotechnical structures. In this paper, the effective-stress analysis method has been used in conjunction with a generalised elasto-plasticity constitutive model implemented into a finite element procedure. Various monotonic and cyclic triaxial paths are simulated in order to demonstrate the capabilities of the constitutive model. The FEM is validated by back analysis of a typical Port Island PC1 caisson type quay wall, which was damaged during the 1995 Hyogoken-Nanbu earthquake. The numerical results are compared with the observed data obtained consisting of seaward displacement, settlement and tilting. In addition, both the influence of permeability, on the generation of pore water pressure and the influence of the relative density of the backfill and foundation layers, on the residual deformation of gravity quay walls are investigated. 相似文献
11.
介绍基于性能抗震设计的核心理念,以支挡结构震害调查分析为背景,阐述开展高烈度区重力式挡墙基于性能抗震设计研究的必要性;构建重力式挡墙基于性能的抗震设计框架,归类分析现行规范与基于性能抗震设计的关键技术问题;依据支挡结构震害调查及大型振动台模型试验,提出位移指数可作为衡量挡墙抗震性能的量化指标,确定重力式挡墙基于性能抗震设计的性能准则及流程;经对比计算基于性能与规范抗震设计的挡墙算例,显示基于性能抗震设计的优越性,为高烈度区重力式挡墙基于性能抗震设计的工程应用提出建议。 相似文献
12.
为了获取近场永久位移,通常采用基线校正方法,对近场加速度记录进行基线校正并积分得到永久位移值,但这一结果主观性较强,其可靠性也往往缺乏验证。为了解决这一问题,本文提出了一种能产生包含永久位移振动过程的振动台实验方案,采用振动台加滑动机构的方法,模拟记录到永久位移台站测点的真实振动情况;在实验中分别采用加速度计、摄影测量方法分别直接得到加速度和位移时程,对加速度时程进行基线校正并积分得到位移时程,将其与直接获得的位移时程进行对比,以验证采用基线校正方法的有效性。实验结果表明,在实验室条件下采用现有的基线校正方法校正后,通过积分能得到可以接受的位移时程。 相似文献
13.
Seismic performance of natural slopes, earth structures and solid-waste landfills can be evaluated through displacement-based methods in which permanent displacements induced by earthquake loading are assumed to progressively develop along the critical sliding surface as a result of transient activation of plastic mechanisms within the soil mass. For sliding mechanisms of general shape the earthquake-induced displacements should be computed using a model that provides a closer approximation of sliding surface. When large permanent displacement are induced by seismic actions, due to substantial shear strength reduction, and significant changes in ground surface occur, an improved estimate of permanent displacement can be obtained using a model which accounts for shear strength reduction and mass transfer between adjacent portions of the slope resulting from geometry changes of ground surface during the seismic event.In this paper, a GLE-based model is proposed for seismic displacement analysis of slopes that accounts for shear strength degradation and for geometry rearrangement. Model accuracy is validated against experimental results obtained from shaking table tests carried out on small scale model slopes. Comparison of computed and experimental results demonstrates the capability of the proposed approach in capturing the main features of the observed seismic response of the model slopes. 相似文献
14.
15.
This paper presents the results of an experimental work in order to evaluate the performance of a novel proposed retrofitting technique on a typical dome‐roof adobe building by shaking table tests. For this purpose, two specimens, scaled 2:3, were subjected to a total of nine shaking table tests. The unretrofitted specimen, constructed by common practice, is designed to evaluate seismic performance and vulnerability of dome‐roof adobe houses. The retrofitted specimen, exactly duplicating the first specimen, is retrofitted based on the results obtained from unretrofitted specimen tests, and the improvement in seismic behavior of the structure is investigated. Zarand earthquake (2005) Chatrood Station is selected as the input ground motion that was applied consecutively at 25, 100, 125, 150 and 175% of the design‐level excitation. At 125% excitation level, the roof of the unretofitted specimen collapsed due to the walls' out‐of‐plane action and imbalanced forces. The retrofitting elements consist of eight horizontal steel rods drilled into the walls, passed through the specimen and bolted on the opposite wall surfaces. To improve walls in‐plane seismic performance, welded steel mesh without using mortar, covered less than half area of walls on the external face of the walls, is used. In addition to strain gauges for recording steel rod responses, several instrumentations including acceleration and displacement transducers are implemented to capture response time histories of different parts of the specimens. The corresponding full‐scaled retrofitted prototype tolerated peak acceleration of 0.62 g almost without any serious damage. Copyright © 2016 John Wiley & Sons, Ltd. 相似文献
16.
Experimental evidence supporting the fact that results from quasi‐static (QS) test of low‐rise reinforced concrete walls may be safely assumed as a lower limit of strength and displacement, and energy dissipation capacities are still scarce. The aim of this paper is to compare the seismic performance of 12 reinforced concrete walls for low‐rise housing: six prototype walls tested under QS‐cyclic loading and six models tested under shaking table excitations. Variables studied were wall geometry, type of concrete, web steel ratio, type of web reinforcement and testing method. Comparison of results from dynamic and QS‐cyclic tests indicated that stiffness and strength properties were dependent on the loading rate, the strength mechanisms associated with the failure mode, the low‐cycle fatigue, and the cumulative parameters, such as displacement demand and energy dissipated. Copyright © 2012 John Wiley & Sons, Ltd. 相似文献
17.
A new mass rig system is proposed to minimize the deficiencies in current shaking table testing setups. This is accomplished by placing the inertial mass on a convex path designed to impose P‐Delta demands on slender cantilever columns. The design and performance of the mass rig system, and the principles used in deriving the equations of motion and their analytical validation against results obtained from shaking table tests, are presented. Formulation of the governing equations of motion was based on Lagrangian mechanics and solved using an implicit linear acceleration method with an adaptive time step formulation. Friction developed in the sliding system was also incorporated in the equations of motion. Experimental results validated the accuracy in the derivation and solution of the equations of motion. Validated by analytical and experimental results, P‐Delta effects were found to increase the displacement demands on slender columns in the low‐frequency range of acceleration input, while in the high‐frequency range P‐Delta effects led to no increase and in some cases even a reduction in displacement demands. Copyright © 2015 John Wiley & Sons, Ltd. 相似文献
18.
为优化处于长周期地震动输入下的大型建筑剪力墙结构,进行了振动台试验。分析普通地震动与长周期地震动波的区别,证明了长周期地震波具有显著长周期分量的特性。将某一高层酒店剪力墙作为研究案例,设计模拟实验台的构建流程与传感器布局,将建筑模型缩尺比例设置为1∶10。选择CA波、RG波、EL波作为实验用地震波,从位移与结构周期、层间剪力与位移比、易损性以及损失评估等方面对大型建筑剪力墙的抗震性能进行了评估。振动台试验结果表明,在位移相同的情况下,长周期地震波下的建筑极限承载力最小;在经历CA波、RG波、EL波后,模型的自振周期均发生变化,而EL波作用下模型的自振周期始终比基本周期略长;不同地震波下,X、Y向层间剪力变化基本趋于一致;CA波、EL波作用下,X向位移比较为接近,而剪力墙Y向上位移比在三种地震波作用下具有较大差异性;在长周期地震波作用下,大型建筑剪力墙损伤最为严重。 相似文献
19.
边坡振动台模型实验动位移的加速度时程积分探讨 总被引：3，自引：0，他引：3
受数据采集条件限制,振动台模型实验的速度和动位移时程一般由实测加速度时程信号进行积分得到。通过理论分析和实验实测数据计算,认为动位移的频域积分法误差来源是低频截止频率的选取,特别当低频频率接近零时,传统二阶频域积分可产生较大的动位移低频振荡和峰值误差。提出利用时域与频域混合的方法,即频域一时域混合积分法,来克服积分过程带来的误差,其在对加速度两次积分中,分别进行一次频域积分和一次时域积分。地震模拟振动实验的台面实测加速度数据积分与台面动位移计实测数据的对比表明,较之传统的二阶频域积分,采用频域一时域混合积分时误差可明显减小。 相似文献
20.
A numerical procedure for a dynamic non-linear finite element analysis is proposed here to analyse three-dimensional reinforced concrete shear wall structures subjected to earthquake motions. A shear wall is modelled as a quasi-three dimensional structure which is composed of plane elements considering the in-plane stiffness of orthogonal flange panels. The proposed constitutive model is based on the non-linearity of reinforcement and concrete in which the tension stiffening in tension and the degradation of stiffness and strength in compression of concrete after cracking are considered. The acceleration-pulse method, which is a kind of explicit analytical procedure, is employed to solve the non-linear dynamic equations, where the dynamic equation can be solved without stiffness matrix and so the iterative procedure is not necessary for descending portion of stress–strain relationship caused by cracking and softening after compressive strength in concrete. The damping effect is considered by assuming equivalent viscous damping which can give good cyclic behaviours of inertia force vs. displacement relationships. This analytical method was applied to a test specimen of a reinforced concrete shear wall with a H-shaped section which was vibrated up to failure by using a large-scale shaking table with high -performance in Japan. The test was performed as one of the dynamic model tests for evaluation of seismic behaviour of nuclear reactor buildings. The calculations were performed sequentially from the elastic range to failure. The comparison with the test results shows that this approach has good accuracy. © 1997 by John Wiley & Sons Ltd 相似文献