首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 15 毫秒
1.
Precipitation of decay products of atmospheric 222Rn in small containers and the effects of their precipitation on alpha-particle-track-measurements of radon activities were studied. From decay curves of decay product activities on surfaces exposed to radon-containing air the ratios 214Pb/218Po (=r) in the precipitates were determined. From r average ages of precipitating decay products were calculated. Average ages and r were low, indicating rapid precipitation of decay products, and decreased with container size. Activities on exposed surfaces were approximately those expected if decay products precipitate completely and uniformly on the internal surfaces of containers.Decay products precipitated on foils of correct thickness covering cellulose nitrate (CN) track detectors produce tracks. Therefore track densities produced by given radon activities are increased by such covers to extents predictable from the decay product activities on the overlays. Tracks formed under overlays may etch to larger, more vertical-sided, more easily counted forms. When suspended, uncovered, in air at distances from surfaces greater than the ranges of the alpha particles, three types of CN recorded tracks at the rate (ρ′) of 0.12 tracks cm?2 (pCi Rn)?1 1?1 hr?1 as predicted by a theoretical expression. In small containers (ρ′) varied with position and container size.  相似文献   

2.
210Po and 210Pb measurements of soils delineated uranium anomalies at three out of four test sites in Ontario, Canada. Measurements were made of 210Po in solutions produced by both complete digestion and partial leaching of soil samples. Direct plating of 210Po onto metal plates was followed by measuring the alpha activity. Subsequent plating of 210Po in-grown from 210Pb in solution several months later confirmed the anomalies.The 210Po and 210Pb anomalies at three of the test sites coincided with 226Ra and 222Rn anomalies. Samples from the fourth uranium occurrence associated with a known 222Rn anomaly failed to show either a 226Ra anomaly on the one hand, or 210Po or 210Pb anomalies on the other. This suggests that the 210Po and 210Pb anomalies were probably produced by the decay of 226Ra contained within secondary dispersion haloes.Although anomalies due to the 210Po and 210Pb products of 222Rn have now been documented, prospecting methods based on their use as direct tracers of the migration paths of 222Rn require much further development.  相似文献   

3.
210Po and 210Pb measurements of soils delineated uranium anomalies at three out of four test sites in Ontario, Canada. Measurements were made of 210Po in solutions produced by both complete digestion and partial leaching of soil samples. Direct plating of 210Po onto metal plates was followed by measuring the alpha activity. Subsequent plating of 210Po in-grown from 210Pb in solution several months later confirmed the anomalies.The 210Po and 210Pb anomalies at three of the test sites coincided with 226Ra and 222Rn anomalies. Samples from the fourth uranium occurrence associated with a known 222Rn anomaly failed to show either a 226Ra anomaly on the one hand, or 210Po or 210Pb anomalies on the other. This suggests that the 210Po and 210Pb anomalies were probably produced by the decay of 226Ra contained within secondary dispersion haloes.Although anomalies due to the 210Po and 210Pb products of 222Rn have now been documented, prospecting methods based on their use as direct tracers of the migration paths of 222Rn require much further development.  相似文献   

4.
Precipitation of decay products of atmospheric 222Rn in small containers and the effects of their precipitation on alpha-particle-track-measurements of radon activities were studied. From decay curves of decay product activities on surfaces exposed to radon-containing air the ratios 214Pb/218Po (=r) in the precipitates were determined. From r average ages of precipitating decay products were calculated. Average ages and r were low, indicating rapid precipitation of decay products, and decreased with container size. Activities on exposed surfaces were approximately those expected if decay products precipitate completely and uniformly on the internal surfaces of containers.Decay products precipitated on foils of correct thickness covering cellulose nitrate (CN) track detectors produce tracks. Therefore track densities produced by given radon activities are increased by such covers to extents predictable from the decay product activities on the overlays. Tracks formed under overlays may etch to larger, more vertical-sided, more easily counted forms. When suspended, uncovered, in air at distances from surfaces greater than the ranges of the alpha particles, three types of CN recorded tracks at the rate (ρ′) of 0.12 tracks cm−2 (pCi Rn)−1 1−1 hr−1 as predicted by a theoretical expression. In small containers (ρ′) varied with position and container size.  相似文献   

5.
Vertical profiles of 210Po in soils near the Midwest uranium deposit and an associated surficial radioactive sandstone boulder train in northern Saskatchewan show a high 210Po background in air-dried forest litter (24 pCi/g) and Ah horizon soil (11 pCi/g) relative to lower soil horizons (<1 pCi/g). These high levels mask the 210Po signal from the radioactive boulders in the near-surface soil horizons. Only in the Bf and C horizons can the existence of the radioactive boulders be inferred from 210Po determinations. For comparative purposes profiles for 226Ra, U, Ni, and other trace elements are also presented.Escape of most of the Rn from near surface soils into the atmosphere, homogenization and decay of Rn, and precipitation of decay products back onto surface soils satisfactorily explain the field observations discussed here.Compared to the highly anomalous 222Rn signal in soil gases over this boulder train the 210Po contrast is very weak and is of little use for prospecting for this type of boulder train. The relatively high 210Po background in surficial materials relative to lower soil horizons dictates that great care be taken with the 210Po method; the deepest possible horizons should be sampled.  相似文献   

6.
Radon concentrations in high background radiation areas in the south are higher than those of others in China, especially ^220Rn concentration is significantly high. Therefore, measurements of ^222Rn and ^220Rn concentrations should be carried out there. This paper introduces a large size collector of radon progeny and its applications. The collector is a sheet of polyvinyl chloride fiber with electrostatics of (-500 V)-(-700 V). Its size (60 mm in diameter) is larger than those of others (26 mm in diameter) that work with the same principle. The collector is more effective to adsorb radon progeny than most of others. The equipment of ZnS(Ag) Scintillation Counting System is available for large size collectors to detect radon progeny. Therefore, its sensitivity of measurement is higher than that of others. According to the different half lives of radon progeny, and based on both theory and experiments, a formula for discrimination and calculation of ^222Rn and ^220Rn concentrations is deduced. The ^222Rn and ^220Rn concentrations were surveyed with electrostatic collectors of radon progeny on the campus of commercial school and some other areas in Hainan, southern China. Neither ^222Rn nor ^220Rn concentration was found significantly high. However, several faults underground were delineated. The collector is also used to study radon transportation. Results indicate that radon changes regularly with date when it has transported for a certain distance. Velocities of radon migration in the four media are quite different. Radon migrates more quickly in vertical tube than in the horizontal tube.  相似文献   

7.
Continuous soil-gas radon and thoron measurements were carried out at 15 days interval along Mat fault in Mizoram (India), which lies in the seismic zone V of the seismic zonation map of India. The study was carried out from March 2012 to February 2013 using LR-115 Type II detectors, manufactured by Kodak Pathe, France. The effect of meteorological parameters on radon and thoron data was taken into consideration. The annual average value of radon and thoron concentration was found to be 621.21 and 590.18 Bq/m3 with a standard deviation of 377.60 and 301.34 Bq/m3, respectively. Inverse correlation coefficient was obtained between radon/thoron concentration and the meteorological parameters except in one case (thoron and relative humidity) which showed a weak positive correlation. Standard deviation method was employed in order to differentiate those anomalies which are solely caused by seismic events and not by meteorological parameters. The data obtained have been correlated with the seismic activities that occurred around the measuring site. Positive correlations were found between radon/thoron data and the earthquakes.  相似文献   

8.
Radon, thoron, and their progeny are largest contributors to the radiation dose received by human beings present in the natural environment. The indoor radon depends upon many factors such as building materials, meteorology, ventilation, and occupant’s behavior. This paper presents the measurements of indoor radon, thoron, and their progeny in four villages in rural area of district Kanshiram Nagar (Kasganj) in the state of Uttar Pradesh in Northern India. The concentration of indoor radon and thoron varies from 10.32 to 72.24 and 11.61 to 84.49 Bq m?3 with a geometric mean (GM) of 29.49 and 31.20 Bq m?3, respectively. The concentration of radon and thoron daughters was found to vary from 1.11 to 7.80 and 0.31 to 2.28 mWL, respectively. The annual exposure due to radon and thoron mainly vary from 0.05 to 0.30 WLM. The preliminary results (i.e., bare mode exposure of the LR-115 detectors fixed on cards) of this study have been separately published and compared this recent data with those results.  相似文献   

9.
A calculation method for determining the amount of Rn isotopes and daughter products at the start of measurement (CRAS) is proposed as a more accurate means of estimating the initial Rn concentration in soil gas. The CRAS utilizes the decay law between 222Rn and 220Rn isotopes and the daughter products 218Po and 216Po, and is applicable to α-scintillation counter measurements. As Rn is both inert and chemically stable, it is useful for fault investigation based on the soil gas geochemistry. However, the total number of α particles emitted by the decay of Rn has generally been considered to be proportional to the initial Rn concentration, without considering the gas condition with respect to radioactive equilibrium. The CRAS method is shown to be effective to derive Rn concentration for soil gases under both nonequilibrium conditions, in which the total number of decays increases with time, and equilibrium conditions, which are typical of normal soil under low gas flux. The CRAS method in conjunction with finite difference method simulation is applied to the analysis of two active fault areas in Japan, and it is demonstrated that this combination could detect the sharp rises in 222Rn concentrations associated with faults. The method also allows the determination of fault geometry near the surface based on the asymmetry variation of the Rn concentration distribution when coupled with a numerical simulation of 222Rn transport. The results for the new method as applied to the two case studies are consistent with the data collected from the geological survey. It implies that the CRAS method is suitable for investigating the fault system and interstitial gas mobility through fractures. The present analyses have also demonstrated that high Rn concentrations require the recent and repeated accumulation of 222Rn parents (230Th and 226Ra) in fault gouges through deep gas release during fault movement.  相似文献   

10.
Analysis of radioactive (210Pb) and stable lead isotopes in near-surface samples has been tested as a method of uranium exploration in the Pine Creek Geosyncline, Northern Territory, Australia. The lead isotopes were extracted from the samples by a mild leaching agent and were measured by alpha spectrometry for 210Pb and by mass spectrometry for stable lead isotopes. The results are compared with those obtained by conventional methods utilizing measurements of radioactivity and radon (Track Etch) in situ and 226Ra, 228Ra and U contents of soils. The major problems addressed were whether the lead isotopic methods are more sensitive than the conventional methods and whether they can discriminate “real” anomalies from the common barren anomalies found in black soils and swamps which contain radium in excess of the uranium present.Four test areas, representing a range of exploration problems, were chosen in the vicinity of the Koongarra uranium deposits and 25 samples from each area were analyzed. Most samples have more 226Ra than uranium. Radium analyses of several water samples show the source of this radium to be non-uraniferous rocks within the Kombolgie sandstone. The results for soil 226Ra, radon, scintillometry and 219Pb were generally closely correlated, and as a result, the 210Pb method was not considered to have any advantages over the conventional methods.At the Koongarra X prospect, which has a weak surface expression, the ratio gave the strongest indication of the underlying uranium mineralization with an anomaly to background ratio of 12.5. However, this ratio is correlated with uranium content and does not offer any particular advantages over uranium analyses alone. More subtle indications of uranium mineralization were found by relating the radiogenic lead (206Pb) and the thorium-derived lead (208Pb) to the common lead content (204Pb). A plot of versus (horizontal axis) is linear for country rock samples, irrespective of the amount of more recently introduced 226Ra. Samples above uranium mineralization lie off this trend, along a line of near-zero slope. By the use of this plot, indications were found of the Koongarra No. 2 orebody, which is concealed by about 40 m of barren overburden; none of the other techniques detected this mineralization.  相似文献   

11.
氡的多参数测量用于非铀矿地质问题   总被引：1，自引：1，他引：1  
吴其  贾文懿 《物探与化探》1991,15(6):431-438
在非铀矿地质问题中,常存在着一种或几种氡的弱异常(如222Rn、220Rn等).在选用测氡方法来解决这类问题时,要求它具有高灵敏度、高测量精度和多测量参数的特点。选用静电α卡法、α杯法的多参数测量技术,在圈定岩脉边界、区分岩脉性质、找寻蓄水构造、确定油田范围的应用中取得了明显的效果,  相似文献   

12.
Estimation of Rn transfer from water to indoor air based on multi-day measurements may underestimate alpha exposure that occurs at short time scales in confined spaces, such as from showering, in houses with high Rn activities in the water supply. In order to examine one such incremental increase in exposure, variations in Rn in water and indoor air in 18 houses with private wells in western North Carolina (USA) were investigated. Radon in well water ranged from 158 to 811 Bq L−1 (median 239 Bq L−1). After 20-min showers in bathrooms with closed doors, peak Rn in air increases (above background) ranged from 71 to 4420 Bq m−3 (median 1170 Bq m−3). Calculated transfer coefficients at the scale of a 40-min closed bathroom (20-min shower plus 20 min post-shower) are described by a lognormal distribution whose geometric mean exceeds the widely-used ∼10−4 whole-house transfer coefficient by about one order of magnitude. As short-lived decay products grow from shower-derived Rn, short-term alpha energy exposure occurs in bathrooms in addition to the exposure caused by Rn mixed throughout the volume of the house. Due to the increasing ratio of Rn decay products to Rn, alpha energy exposure is greatest several minutes after the shower is turned off. For a 7.2-min shower with 10 min of additional exposure before opening the door, a geometric mean 5.6% increase in exposure over the ∼10−4 whole-house transfer coefficient derived from longer measurement periods was estimated. In addition to Rn activity in water, short-term shower exposure to Rn progeny depends on exposure time, ventilation, attachment and deposition, among other variable factors that characterize individual houses and residents.  相似文献   

13.
Controls governing the production of 4He and 222Rn in the solid phase as well as parameters and processes contributing to their transport into the pore fluid are discussed. 222Rn activity is used to quantify the uranium sources for 4He and the result is a simplified pore-fluid age equation which is virtually independent of the porosity, the water/rock ratio, the rock density and the uranium concentration, but does require a Th/U estimate. The crucial parameter is the ratio of the release factors for the two species, /GLRn//GLHe, which is discussed in terms of three possible release mechanisms: (1) recoil; (2) recoil followed by diffusion; and (3) weathering release of accumulated 4He. It was found that /GLRn//GLHe can vary over several orders of magnitude, but can be expressed in terms of the effective grain size r, and the diffusive half-length for 222Rn decay, re.4He measurements are used to “date” gases from known gas fields and the agreement with the assumed source-rock age is good. Application of 4He/ 222Rn measurements to continental freshwater springs indicates that the weathering release of accumulated 4He dominates the input and results in a large overestimate of groundwater age. Measurement in the Lardarello geothermal field indicates that the 4He/222Rn method can indicate relative transport direction. Other possible applications in various geochemical fields are suggested.  相似文献   

14.
The combined use of geophysical and soil gas composition exploration methods allows to rapidly obtain at relative low cost information that might be related to seismic activity conditions. In this study, we carried out geochemical soil gas sampling (222Rn, 220Rn and CO2), electrical resistivity tomography and seismic refraction profiles in two selected zones near the town of Amer in the Spanish Pyrenees, where the presence of recent fractures is evident in the field. Data analysis clearly reveals anomalous values for each gas at specific positions along the electrical imaging transects. Geomorphologic and hydrogeologic data and the integration of geophysical data and soil gas measurements indicate that: (1) endogene gases radon (222Rn) and carbon dioxide (CO2) are released from the meta-sedimentary basement rocks across the main fractured zones with higher permeability values, while lower Cenozoic detrital sedimentary formations act as an impervious boundary; (2) sites with highest radon concentrations (52?kBq?m?3) coincide with the zones in the Amer fault showing more recent geomorphic evidence of activity, and more specifically with those areas covered by thinner surficial formations; (3) the lowest 222Rn values (0.2?C0.4?kBq?m?3) were recorded just on the master active fault plane. This pattern could be explained by a dilution effect resulting from high rates of soil CO2 efflux (267?g?m?2?day?1); (4) soil thoron (220Rn) activity is maximum (143?kBq?m?3) in areas with high surficial fracturing; (5) groundwater pumping may cause important distortions in the natural flow dynamics and in the measured concentrations of gases. The agreement between the different data (geochemical, geophysical, and hydrogeological) and field observations (geology and geomorphology) leads us to propose a preliminary tectonic-gravitational model for the study area.  相似文献   

15.
The purpose of this study was to measure, compare, and analyze the air concentration of radon that was emitted to the atmosphere from construction materials such as cement brick, tile, red clay tile, and gypsum tile. The study method was to use continuous radon monitoring equipment (RTM 1688-2) to measure concentrations of radon and thoron contained in brick, tile, red clay tile, and gypsum tile. According to the measurement results, the cement brick among the four samples showed the highest measurement value for radon, while the red clay tile showed the highest measurement value for thoron. When the radon emission concentration was estimated based on materials required for construction per unit area (3.3 m2) in an actual construction, the cement brick had the highest measurement values for radon and thoron. This study confirmed the degree of radon emission from construction materials. The purpose of this study was also to suggest a method to examine the effects of radon and reduce the dose of personal radiation exposure. It is believed that the government should be active in publicizing and managing use of construction materials that have lower levels of radon emission.  相似文献   

16.
Naturally-occurring radionuclides (uranium, radium, and radon), major dissolved constituents, and trace elements were investigated in fresh groundwater in 117 wells in fractured crystalline rocks from the Piedmont region (North Carolina, USA). Chemical variations show a general transition between two water types: (1) slightly acidic (pH 5.0–6.0), oxic, low-total dissolved solids (TDS) waters, and (2) near neutral, oxic to anoxic, higher-TDS waters. The uranium, radium, and radon levels in groundwater associated with granite (Rolesville Granite) are systematically higher than other rock types (gneiss, metasedimentary, and metavolcanic rocks). Water chemistry plays a secondary role on radium and radon distributions as the 222Rn/226Ra activity ratio is correlated with redox-sensitive solutes such as dissolved oxygen and Mn concentrations, as well as overall dissolved solids content including major divalent cations and Ba. Since 224Ra/228Ra activity ratios in groundwater are close to 1, we suggest that mobilization of Ra and Rn is controlled by alpha recoil processes from parent nuclides on fracture surfaces, ruling out Ra sources from mineral dissolution or significant long-distance Ra transport. Alpha recoil is balanced by Ra adsorption that is influenced by redox conditions and/or ion concentrations, resulting in an approximately one order of magnitude decrease (~ 20,000 to ~ 2000) in the apparent Ra distribution coefficient between oxygen-saturated and anoxic conditions and also across the range of dissolved ion concentrations (up to ~ 7 mM). Thus, the U and Th content of rocks is the primary control on observed Ra and Rn activities in groundwater in fractured crystalline rocks, and in addition, linked dissolved solids concentrations and redox conditions impart a secondary control.  相似文献   

17.
Analyses have been made of many groundwater samples, some of which were collected from the vicinity of uranium deposits and others from unmineralized areas, for dissolved uranium and for the four naturally occurring isotopes of radium: 226Ra (238U decay series, y), 228Ra and 224Ra (232Th decay series, y and 3.8 d) and 223Ra (235U decay series, d). The radium isotopes 226Ra, 224Ra and 223Ra, are measured by alpha-spectrometry after extraction from a water sample soon after collection and 228Ra at a later time by determining the amount of ingrown 212Po.  相似文献   

18.
The Hornby Bay sandstone basin of the Northwest Territories represents one of three areas in Canada in which the geological environment is favourable for the occurrence of unconformity-type uranium deposits. The project area lies within the zone of continuous permafrost and is associated with relatively thin and locally derived tills and abundant outcrops. Topographic relief is normally in the order of 100 m but may locally exceed 300 m/km in more rugged areas.Geochemical case histories for soil and lake-sediment surveys illustrate: identification of regional anomaly, anomaly follow-up, and detailed investigations. Success in locating uranium occurrences using geochemical surveys is high. Orientation studies trace anomalous dispersion trains 10 to 200 m downslope of recognized sources. Anomaly generation is favoured by active hydromorphic processes in geochemically homogeneous overburden containing an average background of 0.5 ppm uranium (using a 4N nitric acid leach). Anomaly contrasts are typically 2 Xto 3 X this value, and anomalous values exceeding 1.5 ppm uranium are highly reproducible.Copper and radium anomalies act as pathfinders for uranium. Lead is present in anomalous concentrations in specimens from the uranium occurrences but lead enrichment in overburden is not sufficiently great to permit its use as a pathfinder element. Preliminary work based on radon and 210Po has not led to identification of anomalies other than those recognized by more routine geochemical surveys.Association of geochemical anomalies with faults within the sandstone basin constitutes one of four conditions elevating an area to drill target status. Methods for drill testing of geochemical soil anomalies depend on the relationship between the geochemical anomaly and an identifiable fault zone.  相似文献   

19.
 Radon-prone areas in Israel were mapped on the basis of direct measurements of radon (222Rn) in the soil/rock gas of all exposed geological units, supported by the accumulated knowledge of local stratigraphy and sub-surface geology. Measurements were carried out by a modified alpha-track detection system, resulting in high radon levels mainly in rocks of the Senonian-Paleocene-aged Mount Scopus Group, comprised of chert-bearing marly chalks, rich in phosphorite which acts as the major uranium source. Issues of source depth, seasonal variations and comparison with indoor radon levels are addressed as well. This approach could be applied to other similar terrains, especially the Mediterranean Phosphate Belt.  相似文献   

20.
Identifying ore-induced geochemical anomalies at the surface that indicate concealed deposits in buried areas remains a significant challenge in geochemical exploration. In this study, in order to trace the source of the geochemical anomalies, systematic luminescence intensity analyses were conducted on quartz grains from the Quaternary regolith at the Hadatu sandstone-type uranium deposit in the Erenhot Basin. The optically stimulated luminescence (OSL) ages were much older than the depositional ages of the Quaternary regolith. Moreover, quartz OSL ages were closely related to both borehole grades and sampling depths. Thus, the abnormal mineral OSL ages from near-surface sediments were ultimately controlled by the sandstone-type uranium deposits. This is identical to the rapid changes of quartz OSL ages (0.063 ka/cm) and equivalent doses (0.19 Gy/cm) with depths in a given sampling site. The instantaneous soil radon concentration was positively correlated with the quartz OSL apparent age, indicating their ore-induced origin and, as a result, their effectiveness in the exploration of concealed uranium deposits. Other parameters, including mobile-state uranium and 210Po contents, were poorly correlated with quartz OSL ages and therefore should only be used with caution for geochemical exploration. This is the first time an attempt has been made to discriminate the ore-induced sources for different surface anomaly parameters, including instantaneous soil radon, mobile-state uranium and 210Po contents for concealed sandstone-type uranium deposits.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号