共查询到20条相似文献，搜索用时 15 毫秒
1.
地球介质的非线性弹性造成了岩石动态和静态弹性模量在数值上的差异。本文用超声波速度测量得到岩石的动模量，用含有小循环的加卸载实验得到小循环模量，用大循环的应力、应变曲线斜率得到静模量，用测点的应力、应变之比得到杨氏模量。通过改变小循环的应变振幅来研究模量与应变振幅的关系，进而比较用不同测量方法得到的模量值的差异。结果表明，动模量值最大，小循环模量值次之，大循环静模量值再次之，而杨氏模量最小。岩石非线性模量既是所受应变水平的函数，也是应变振幅的函数，模量随应变振幅的增加以指数形式下降，随应变水平增加以指数形式上升。最后简要介绍了P-M模型的基本概念，用岩石中微裂缝具有不同的分布密度，不同的打开和关闭压力来解释模量与应变振幅的关系。 相似文献
2.
静态弹性参数对储层压裂改造、应力场及裂缝预测具有重要意义,开展地层压力条件下煤岩动、静态弹性参数实验研究,获得动、静态弹性参数之间的关系,为利用动态弹性参数预测静态弹性参数提供了岩石物理依据.本次研究应用MTS岩石物理参数测试系统完成沁水盆地和顺地区的煤岩样在地层压力条件下的动静态弹性参数同步测试.结果表明:动态杨氏模量随压力的增加而增加,而动态泊松比随压力的变化较为复杂;动、静态杨氏模量之间呈线性关系,且动态杨氏模量大于静态杨氏模量;动、静态泊松比之间的相关性较差,大部分煤样的动态泊松比小于静态泊松比.获得的这些关系为动静弹性参数转换提供了基础,进而为利用地震资料进行静弹性参数预测,获得岩石力学性能参数提供了一种途径. 相似文献
3.
采用实验手段研究岩石的动、静弹性参数的变化规律及动、静态参数间的相互关系时存在着测试成本高,工作量大,普适性差且可靠性较低等问题.对岩样在单轴压缩加载条件下的破坏过程,采用岩石破裂过程分析RFPA系统进行数值模拟,获取岩样的应力—应变曲线可计算得到静态弹性参数.从弹性波动理论出发,采用交错网格有限差分方法,对超声波透射实验进行数值模拟,获取纵、横波速度可计算得到动态弹性参数.对50块不同的气饱和孔洞型岩样同步计算其动、静态弹性参数,并分析动、静态弹性参数随孔隙度的变化规律及动、静态弹性参数间的关系.结果表明:动弹性模量大于静弹性模量,且二者之间的线性关系良好,而动、静泊松比之间不存在明显的相关关系.该项研究为动、静弹性参数关系研究提供了新的方法,研究结果对于指导储层预测、油气检测以及地震资料综合解释都有重要的意义. 相似文献
4.
在MTS伺服压机上对不同饱和状态的砂岩、大理岩标本进行了垂直层理和平行层理两个方向的正弦波加载试验,研究了饱和岩石的各向异性及非线性黏弹性行为. 在最大载荷低于岩石的屈服点时,获得的衰减、杨氏模量、泊松比、波速都表现出显著的各向异性,同时它们还具有较明显的应变振幅效应和频率效应. 随着应变振幅的增大,衰减近似呈线性增长,杨氏模量和泊松比近似呈线性下降. 在0.005-4Hz频段内除衰减不明显依赖频率以外,杨氏模量、泊松比、波速对频率的依赖性都较强; 当频段扩大到15Hz时,这4个参数都表现出较强的频率效应. 饱和岩石的衰减、杨氏模量、泊松比、波速均随饱和液体的黏滞系数增大而增大. 相似文献
5.
Repeated small amplitude dynamic loading of the soil in the vicinity of buildings, as arising from traffic or construction activities, may cause differential foundation settlements and structural damage. In this paper, an accumulation model for settlements due to vibrations at small strain levels in granular non-cohesive soils is proposed. It is assumed that the dynamic part of the stresses is small with respect to the static part. As plastic deformation in the soil is only observed after a considerable amount of dynamic loading cycles, only the accumulation of the average plastic deformation is considered. The model accounts for the dependency of the deformation on the stress state, the void ratio, and the dynamic loading amplitude. The model is calibrated for homogeneous fine grained sands with the aid of cyclic triaxial test results. 相似文献
6.
龙马溪组页岩是目前国内页岩气勘探的主要层位之一,其静态弹性性质是影响压裂效果的重要因素,而动态弹性性质则是页岩"甜点"地震预测的重要基础.但对龙马溪组页岩动、静态弹性特征相互关系及其影响因素缺少对比研究,致使运用动态弹性性质进行"甜点"预测时存在不确定性.在对龙马溪组页岩样品系统动、静态性质联合测量基础上,分析了页岩样品动、静态弹性性质的变化规律,并讨论了成岩作用与动、静态弹性性质变化规律的因果关系.研究结果表明,龙马溪组页岩上下两段成岩过程存在明显差异,致使上段页岩在结构上表现为以塑性黏土颗粒作为受力骨架,而下段页岩在结构上逐渐转变为脆性石英颗粒作为受力骨架.页岩岩石结构特征的变化控制了动、静态弹性特征的整体变化规律,表现为动、静态杨氏模量、峰值强度等随石英含量的增大表现出近似"V"型的变化形式,而与钙质含量变化呈现正相关关系,与黏土含量变化表现出负相关性.上段页岩宏观力学性质受微观石英+黏土颗粒集合体弹性性质控制,应力应变曲线表现出明显塑性段,动、静态杨氏模量比大于1.4,破裂易于发生在黏土与石英颗粒边界形成宏观单剪型破裂模式,样品脆性低,且脆性变化不受石英含量的影响.下段页岩宏观力学性质受微观石英颗粒集合体弹性性质控制,应力应变曲线表现为弹性变形,动、静态杨氏模量比小于1.4,破裂发生在石英颗粒内部形成宏观劈裂型破裂模式,样品脆性高,且脆性变化与石英含量呈明显正相关关系.研究结果可为龙马溪页气储层的测井解释和地震"甜点"预测提供依据. 相似文献
7.
Erling Fjær 《Geophysical Prospecting》2019,67(1):128-139
Static moduli of rocks are usually different from the corresponding dynamic moduli. The ratio between them is generally complex and depends on several conditions, including stress state and stress history. Different drainage conditions, dispersion (often associated with pore fluid effects), heterogeneities and strain amplitude, are all potential reasons for this discrepancy. Moreover, comparison of static and dynamic moduli is often hampered and maybe mistaken due to insufficient characterization of anisotropy. This paper gives a review of the various mechanisms causing differences between static and dynamic moduli. By careful arrangements of test conditions, it is possible to isolate the mechanisms so that they can be studied separately. Non-elastic deformation induced by the large static strain amplitudes is particularly challenging, however a linear relationship between non-elastic compliance and stress makes it possible to eliminate also this effect by extrapolation to zero strain amplitude. To a large extent, each mechanism can be expressed mathematically with reasonable precision, thus quantitative relations between the moduli can be established. This provides useful tools for analyses and prediction of rock behaviour. For instance, such relations may be used to predict static stiffness and even strength based on dynamic measurements. This is particularly useful in field situations where only dynamic data are available. Further, by utilizing the possibility for extrapolation of static measurements to zero strain amplitude, dispersion in the range from seismic to ultrasonic frequencies may be studied by a combination of static and dynamic measurements. 相似文献
8.
以片状颗粒成分为主的片状结构砂与常用的圆形颗粒标准石英砂相比,在物理力学特性上有显著的差异。循环荷载作用下,饱和砂土振动孔压上升会导致土体刚度发生软化,当振动孔压累积达到一定水平时,会产生液化现象,从而引起土体结构发生破坏。采用英国WFI动三轴仪,研究了南京片状细砂在循环荷载作用下,静偏应力水平、循环应力比水平和循环次数对其动应力一应变关系的影响,考虑每一次循环过程中动应力—应变关系滞回曲线的卸载及再加载割线动剪切模量Gsec和最大割线模量Gmax的变化特性,建立了动剪模量软化的经验公式;静偏应力水平对动剪模量软化有显著影响,随着循环次数的增加,动应力—应变滞回圈逐渐向应变累积方向滑移和向应变轴方向倾斜,且彼此分离;考虑循环软化特性,采用修正的Masing准则,描述了循环荷载下南京片状细砂的动应力—应变关系。 相似文献
9.
如何获取土体动模量原位衰减曲线是研究天然土层在循环动荷载下的动变形特性课题中亟待解决的难题。为此,本文自制了一套地震动参数现场试验系统,依据动剪切模量原位测试原理获得了不同深度土体在小应变范围内的动模量原位衰减曲线。试验数据表明:当剪应变小于4×10－5时,土体变形处于线性阶段;当剪应变大于4×10－5时,土体归一化动剪切模量G/Gmax衰减加快,以塑性变形为主。同时,当向土层施加的垂向静荷载越大,归一化动剪切模量值G/Gmax与对数剪应变值logγd之间的关系会逐渐上移,但直线段斜率值不变。相关成果可为试验场地的动模量取值提供一定参考。 相似文献
10.
通过超声-时间动态测试方法系统地分析了煤系沉积岩石纵波和横波速度,计算了煤系岩石动弹性力学参数,同步测试了煤系岩石的静态力学参数,建立了煤系沉积岩石动弹性力学参数与静弹性力学参数之间和煤系岩石物理力学参数与其声波速度之间的定性定量关系.研究结果表明,煤系岩石的动弹性模量与岩石的纵波或横波速度具有很好的正相关关系,而与泊松比不具有这种正相关关系.煤系岩石的动弹性模量要大于其静弹性模量,而动泊松比要小于其静泊松比,它们之间呈线性相关关系.煤系岩石密度、单轴抗压和抗拉强度与其纵波或横波速度之间也呈正相关关系,它们分别服从二次函数、指数函数和线性函数分布. 相似文献
11.
基于动三轴试验研究了不同围压条件下,加载控制方式对压实黄土动应力应变关系的影响规律,对比了不同控制方式下压实黄土的动应力应变时程曲线的差异。研究表明:压实黄土的动应力应变关系符合双曲线模型;加载控制方式不会改变压实黄土骨干曲线的类型,但会显著影响拟合参数的大小。相同围压下,采用应变控制测定的初始动模量较小;随着围压的增大,应变控制下初始动模量随围压的增长速率反而越小,二者之间的差距越来越大。应力控制和应变控制加载过程中,动模量在某一振级下随着动循环次数的增加而逐渐衰减,且应力控制方式下衰减的幅度较大。对于土体结构受力较为敏感的原状土,使用应变控制加载方式可能会获得更为准确的试验结果。 相似文献
12.
杨氏模量和泊松比等岩石弹性参数是表征页岩气储集体岩石脆性、评价储层含气特征的重要特征参数,而叠前地震反演是从地震资料中获取此类参数的有效途径.地震波反射系数方程是叠前反演的基础.首先,在平面波入射等假设条件下推导了基于杨氏模量(Y)、泊松比(σ)和密度(D)的纵波反射系数线性近似方程(YPD反射系数近似方程),该方程建立了地震纵波反射系数与杨氏模量反射系数、泊松比反射系数和密度反射系数的线性关系;其次,对该方程的精度和适用条件进行了分析,模型分析表明,在入射角为40°时,该方程具有较高的计算精度;最后,建立了一种稳定获取杨氏模量和泊松比的叠前地震直接反演方法.模型试算和实际资料试处理表明,基于新方程的反演方法能够稳定合理的直接从叠前地震资料中获取杨氏模量和泊松比参数,提供了一种高可靠性的页岩气"甜点"地震识别方法. 相似文献
13.
Initial fabric of a soil induced by its cyclic strain history is an important parameter together with the void ratio, state of stress and amplitude in respect to further accumulation of deformations under drained cyclic loading. It is of importance for the further deformation prediction to determine the initial fabric of the grain skeleton or the cyclic loading history of the soil. An attempt is made within this paper to correlate small strain stiffness of non-cohesive soil with its cyclic loading history. The results of performed cyclic and dynamic torsional tests show that small strain shear modulus is only moderately affected by cyclic prestraining even if high amplitudes are applied. A signature of prestraining history is observed in the tests since the sand memorizes its prestraining amplitude and the number of applied cycles. 相似文献
14.
Ｓｔａｔｅｏｆｉｎ－ｓｉｔｕｓｔｒｅｓｓｉｎｄｉｆｆｅｒｅｎｔｒｏｃｋｓ（朱焕春，陶振宇）Ｈｕａｎ－Ｃｈｕｎ；ＺＨＵａｎｄＺｈｅｎ－ＹｕＴＡＯ（ＷｕｈａｎＵｎｉｖｅｒｓｉｔｙｏｆＨｙｄｒａｕｌｉｃａｎｄＥｌｅｃｔｒｉｃＥｎｇｉｎｅｅｒｉｎｇ，Ｗｕｈａ... 相似文献
15.
《Journal of Geodynamics》2003,35(4-5):541-551
The relationship between the tilts and strains of rocks and air pressure variations is investigated using deformation measurements from the Protvino observatory. Deformations due to air pressure are large in the observation area. The deformation response to the observed air pressure variations is compared with calculated values. In addition, the effective elasticity of the rock is determined from measured deformations in the underground galleries of the observatory after creating a load on the Earth surface. The observed tilts are considerably larger than the calculated values, for local as well as atmospheric loading, and the rock shear modulus determined from the tilt data is anomalously small compared to the mean shear modulus value for the crust. The observed horizontal strain data indicate no anomaly in the rock shear modulus value. The cavity effects at the observatory cannot explain this phenomenon. It may be caused by the rocks high fracturing. It is supposed, that the influence of cracks on the rock horizontal deformations is small if the cracks are closed and have the vertical direction. In case of large wavelength the large tilts correspond to the great displacements. These displacements may worsen the accuracy of geodetic measurements, especially when measuring vertical crustal movements. 相似文献
16.
黏土类土石混合体常作为路基填料在工程中广泛应用,然而其在交通荷载作用下的动力特性方面研究较少。为此,本文以0.05 Lc(Lc为圆柱试样直径)为土体、块石分类阈值,根据土石混合体中砾石掺量、侧限压力的不同,采用自振柱仪对其在小应变(10^-6~10^-4)下的动剪切模量和阻尼比进行研究。结果表明:土石混合体最大动剪切模量随砾石掺量的增加而不断增大,且在20%~40%掺量区间内增幅最大,随侧限压力的增加而增大,且增幅逐渐变小;在应变幅值相同的条件下,动剪切模量衰变程度随砾石掺量的增加而不断减少,且在20%~40%掺量区间内减幅最大,随侧限压力的增加而减小,且减幅逐渐变小;最小、最大阻尼比随砾石掺量和侧限压力的增加而减少。结合试验结果分别从颗粒“骨架”结构性、动态结构稳定性、材料密实度、能量耗散等方面阐述块石掺量和侧限压力对土石混合体动剪切模量和阻尼比的影响机理。最后采用优化Hardin-Drnevich模型建立砾石掺量、侧限压力与土石混合体动力特性参数(最大动剪切模量、参考剪应变、最大阻尼比、最小阻尼比)之间的估算公式,以期为土石混合路基的动力设计和施工提供指导。 相似文献
17.
针对荆江大堤江陵段下伏地层广泛分布的饱和粉细砂,参照原位试验成果重塑粉细砂试样,按估算的固结应力比(Kc约为1.6)对试样动剪模量、阻尼比及总应力动强度进行测试,结果表明:(1)试样应力-应变骨干曲线与Hardin-Drnevich双曲线模型假设高度吻合,Hardin公式可很好地拟合动模量/阻尼比与动应变的关系。在研究试样密实度范围内,最大动模量随围压和密实度的增加而增加,但围压对动模量的敏感性更高,且相同围压下动剪模量比与动应变关系曲线近乎重合。围压增大或密实度升高均会引起阻尼比的降低,1%应变对应的阻尼比分布在0.15~0.21之间;(2)偏压状态下以累积轴向应变5%作为液化判别标准进行抗液化强度试验,随特征振次及测试围压的增大,液化动剪应力比相应减小,试样振动孔压比最高仅能达到0.8~0.9;(3)由总应力法求取的动内摩擦角与黏聚力均随设定特征振次的增加而下降,且内聚力并非约等于0,表明动力作用下该试样具有一定的黏滞性。 相似文献
18.
One of the key issues in cyclic behaviour of soft clays is gradual degradation of shear modulus. In most of the cyclic soil models such degrdation of shear modulus of soil with the progression of loading cycle was incorporated, addition to the standard non-linear backbone curves. Such cyclic degradation was usually represented by a parameter, degradation index, which is a function of loading cycles and cyclic shear strain amplitude. However it is well understood from the past experimental studies that the degradation index depends on various other factors as well. The present paper aims to develop a simple empirical model involving degradation index as a function of number of loading cycles, plasticity index, cyclic shear strain, overconsolidation ratio, loading frequency based on the experimental results. It is then fitted with the hyperbolic hysteretic model to estimate the modulus degradation for different cycles. Finally the damping ratio is calculated based on Masing rule with correction factors and validated through experimental results. 相似文献
19.
Rock brittleness directly affects reservoir fracturing and its evaluation is essential for establishing fracturing conditions prior to reservoir reforming. Dynamic and static brittleness data were collected from siltstones of the Qingshankou Formation in Songliao Basin. The brittle–plastic transition was investigated based on the stress–strain relation. The results suggest that the brittleness indices calculated by static elastic parameters are negatively correlated with the stress drop coefficient and the brittleness index B2, defined as the average of the normalized Young’s modulus and Poisson’s ratio, is strongly correlated with the stress drop. The brittleness index B2, Young’s modulus, and Poisson’s ratio correlate with the brittle minerals content; that is, quartz, carbonates, and pyrite. We also investigated the correlation between pore fluid and porosity and dynamic brittle characteristic based on index B2. Pore fluid increases the plasticity of rock and reduces brittleness; moreover, with increasing porosity, rock brittleness decreases. The gas-saturated siltstone brittleness index is higher than that in oil- or water-saturated siltstone; the difference in the brittleness indices of oil- and water-saturated siltstone is very small. By comparing the rock mechanics and ultrasonic experiments, we find that the brittleness index obtained from the rock mechanics experiments is smaller than that obtained from the ultrasonic experiments; nevertheless, both decrease with increasing porosity as well as their differences. Ultrasonic waves propagate through the rock specimens without affecting them, whereas rock mechanics experiments are destructive and induce microcracking and porosity increases; consequently, the brittleness of low-porosity rocks is affected by the formation of internal microcrack systems. 相似文献
20.
动三轴试验中,若在一定轴向静偏应力基础上施加对称正弦波荷载,土体会在荷载正半部分出现轴向压缩状态,而在荷载负半部分有可能因为侧向应力大于轴向应力而出现轴向等效拉伸状态,将此类荷载暂称为等效拉压荷载。为研究等效拉压荷载下饱和粉质黏土的弹塑性变形,设计了多级正弦波荷载室内不排水动三轴试验。依据试验数据揭示了围压、静偏应力、动偏应力和压实系数对土体弹塑性变形发展的影响,并提出用拉压效应系数来确定轴向塑性累积应变的发展趋势。研究表明:若取轴向压缩方向为正方向,拉压效应系数存在一临界值,当实际值大于临界值时,塑性累积应变向负方向发展,反之则向正方向发展或基本保持不变;同时Hardin模型可以较好地描述饱和粉质黏土的动弹模-动应变关系,且塑性累积应变向负方向发展时动弹模量普遍偏小。 相似文献