首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 46 毫秒
1.
Knickpoints in bedrock streams are often interpreted as transient features generated by a change in boundary conditions. It is typically assumed that knickpoints propagate upstream with constant vertical velocities, though this relies on a stream being in erosional steady state (erosion rate equals rock uplift rate) prior to the knickpoint's formation. Recent modeling and field studies suggest that along-stream contrasts in rock erodibility perturb streams from erosional steady state. To evaluate how contrasts in rock erodibility might impact knickpoint interpretations, we test parameter space (rock erodibility, rock contact dip angle, change in rock uplift rate) in a one-dimensional (1D) bedrock stream model that has variable rock erodibility and produces a knickpoint with a sudden change in rock uplift rate. Upstream of a rock contact, the vertical velocity of a knickpoint generated by a change in rock uplift rate is strongly correlated with how the rock contact has previously perturbed erosion rates. These knickpoints increase vertical velocity upon propagating upstream of a hard over soft contact and decrease vertical velocity upon propagating upstream of a soft over hard contact. However, interactions with other transient perturbations produced by rock contacts make for nuances in knickpoint behavior. Rock contacts also influence the geometry of knickpoints, which can become particularly difficult to identify upstream of soft over hard rock contacts. Using our simulations, we demonstrate how a contact's along-stream horizontal migration rate and cross-contact change in rock strength control how much an upstream reach is perturbed from erosional steady state. When simulations include multiple contacts, the knickpoint is particularly prone to colliding with other transient perturbations and can even disappear altogether if rock contact dips are sufficiently shallow. Caution should be taken when analyzing stream profiles in areas with significant changes in rock strength, especially when rock contact dip angles are near the stream's slope.  相似文献   

2.
Prior numerical modeling work has suggested that incision into sub-horizontal layered stratigraphy with variable erodibility induces non-uniform erosion rates even if base-level fall is steady and sustained. Erosion rates of cliff bands formed in the stronger rocks in a stratigraphic sequence can greatly exceed the rate of base-level fall. Where quartz in downstream sediment is sourced primarily from the stronger, cliff-forming units, erosion rates estimated from concentrations of cosmogenic beryllium-10 (10Be) in detrital sediment will reflect the locally high erosion rates in retreating cliff bands. We derive theoretical relationships for threshold hillslopes and channels described by the stream-power incision model as a quantitative guide to the potential magnitude of this amplification of 10Be-derived erosion rates above the rate of base-level fall. Our analyses predict that the degree of erosion rate amplification is a function of bedding dip and either the ratio of rock erodibility in alternating strong and weak layers in the channel network, or the ratio of cliff to intervening-slope gradient on threshold hillslopes. We test our predictions in the cliff-and-bench landscape of the Grand Staircase in southern Utah, USA. We show that detrital cosmogenic erosion rates in this landscape are significantly higher (median 300 m/Ma) than the base-level fall rate (~75 m/Ma) determined from the incision rate of a trunk stream into a ~0.6 Ma basalt flow emplaced along a 16 km reach of the channel. We infer a 3–6-fold range in rock strength from near-surface P-wave velocity measurements. The approximately four-fold difference between the median 10Be-derived erosion rate and the long-term rate of base-level fall is consistent with our model and the observation that the stronger, cliff-forming lithologies in this landscape are the primary source of quartz in detrital sediments. © 2020 John Wiley & Sons, Ltd.  相似文献   

3.
Erosion processes in bedrock‐floored rivers shape channel cross‐sectional geometry and the broader landscape. However, the influence of weathering on channel slope and geometry is not well understood. Weathering can produce variation in rock erodibility within channel cross‐sections. Recent numerical modeling results suggest that weathering may preferentially weaken rock on channel banks relative to the thalweg, strongly influencing channel form. Here, we present the first quantitative field study of differential weathering across channel cross‐sections. We hypothesize that average cross‐section erosion rate controls the magnitude of this contrast in weathering between the banks and the thalweg. Erosion rate, in turn, is moderated by the extent to which weathering processes increase bedrock erodibility. We test these hypotheses on tributaries to the Potomac River, Virginia, with inferred erosion rates from ~0.1 m/kyr to >0.8 m/kyr, with higher rates in knickpoints spawned by the migratory Great Falls knickzone. We selected nine channel cross‐sections on three tributaries spanning the full range of erosion rates, and at multiple flow heights we measured (1) rock compressive strength using a Schmidt hammer, (2) rock surface roughness using a contour gage combined with automated photograph analysis, and (3) crack density (crack length/area) at three cross‐sections on one channel. All cross‐sections showed significant (p < 0.01 for strength, p < 0.05 for roughness) increases in weathering by at least one metric with height above the thalweg. These results, assuming that the weathered state of rock is a proxy for erodibility, indicate that rock erodibility varies inversely with bedrock inundation frequency. Differences in weathering between the thalweg and the channel margins tend to decrease as inferred erosion rates increase, leading to variations in channel form related to the interplay of weathering and erosion rate. This observation is consistent with numerical modeling that predicts a strong influence of weathering‐related erodibility on channel morphology. Copyright © 2017 John Wiley & Sons, Ltd.  相似文献   

4.
Natural damming of upland river systems, such as landslide or lava damming, occurs worldwide. Many dams fail shortly after their creation, while other dams are long‐lived and therefore have a long‐term impact on fluvial and landscape evolution. This long‐term impact is still poorly understood and landscape evolution modelling (LEM) can increase our understanding of different aspects of this response. Our objective was to simulate fluvial response to damming, by monitoring sediment redistribution and river profile evolution for a range of geomorphic settings. We used LEM LAPSUS, which calculates runoff erosion and deposition and can deal with non‐spurious sinks, such as dam‐impounded areas. Because fluvial dynamics under detachment‐limited and transport‐limited conditions are different, we mimicked these conditions using low and high erodibility settings, respectively. To compare the relative impact of different dam types, we evaluated five scenarios for each landscape condition: one scenario without a dam and four scenarios with dams of increasing erodibility. Results showed that dam‐related sediment storage persisted at least until 15 000 years for all dam scenarios. Incision and knickpoint retreat occurred faster in the detachment‐limited landscape than in the transport‐limited landscape. Furthermore, in the transport‐limited landscape, knickpoint persistence decreased with increasing dam erodibility. Stream capture occurred only in the transport‐limited landscape due to a persisting floodplain behind the dam and headward erosion of adjacent channels. Changes in sediment yield variation due to stream captures did occur but cannot be distinguished from other changes in variation of sediment yield. Comparison of the model results with field examples indicates that the model reproduces several key phenomena of damming response in both transport‐limited and detachment‐limited landscapes. We conclude that a damming event which occurred 15 000 years ago can influence present‐day sediment yield, profile evolution and stream patterns. Copyright © 2014 John Wiley & Sons, Ltd.  相似文献   

5.
The assessment of post‐mining landscapes as case studies is an important part of the evaluation of current rehabilitation practices. A necessary part of this assessment is to predict the surface stability of the landform using erosion and landform evolution modelling techniques. In the short term, erosion on a rehabilitated mine site can lead to increased sediment loads and transport of other mine related contaminants in downstream waterways. It is well recognized that in many mine areas the erodibility of surface materials can, and does, vary. This is a particularly significant issue on mine sites, where the surface conditions may range from areas of undisturbed natural surface materials, waste rock dumps constructed with materials exhumed from the sub‐surface, and other areas that have a mix of waste rock and soil to enhance the growth of vegetation. A further significant issue is that when the subsurface materials are exposed to surface conditions they can weather rapidly, changing their erodibility. This paper uses a new version of the SIBERIA landscape evolution and soil erosion model to evaluate the former Nabarlek uranium mine site in the Northern Territory, Australia. This new version of SIBERIA uses spatially variable erosion and hydrology parameters across the study domain to represent different erodibilities of surface materials, thus allowing better representation of catchment heterogeneity. The results demonstrate that the model predicts erosion rates similar to that of other modelled results and independent field data, providing confidence in the model and its parameterization. The tailings, deposited in the mined out pit and capped with waste rock, appear to be safely encapsulated for the modelled period. Copyright © 2008 John Wiley & Sons, Ltd and Commonwealth of Australia (Department of the Environment and Water Resources Supervising Scientist).  相似文献   

6.
Tectonic reconstructions and quantitative models of landscape evolution are increasingly based on detailed analysis of detrital systems. Since the definition of closure temperature in the 1960s, mineral ages of low-temperature geochronometers are traditionally interpreted as the result of cooling induced by erosion, whose rate is a simple, unique function of age patterns. Such an approach can lead to infer paradoxically high erosion rates that conflict with compelling geological evidence from sediment thickness in basins. This indicates that tectonic and landscape models that solely interpret mineral ages as due to cooling during exhumation may not be valid.Here we propose a new approach that takes into account the effects of both crystallization and exhumational cooling on geochronometers, from U–Pb on zircon to fission tracks on apatite. We first model the mechanical erosion of an unroofing magmatic complex and the resulting accumulation and burial of the eroded units in reverse order in the basin. Detrital mineral ages follow a regular pattern downsection. Some mineral ages, such as e.g. U–Pb ages of zircons, cluster around the “magmatic age”, i.e. the crystallization of the magma. Its value is constant along the stratigraphic column in the sedimentary basin; we refer to this behavior as “stationary age peak”. Some other mineral ages, such as e.g. apatite fission-track ages, are often younger than the magmatic age. When they vary smoothly with depth, they define a “moving age peak”, which is the only possible effect of undisturbed cooling during overburden removal, and can therefore be used to calculate an erosion rate.The predictions of our model were tested in detail on the extremely well-studied Bregaglia (Bergell) orogenic pluton in the Alps, and on the sedimentary succession derived from its erosion, the Gonfolite Group. The consistency between predicted and observed age patterns validates the model. Our results resolve a long-standing paradox in quantitative modelling of erosion–sedimentation, namely the scarcity of sediment during apparently fast erosion. Starved basins are the observational baseline, and modelling must be tuned to include a correct analysis of detrital mineral geochronology in order to reconcile perceived discrepancies between stratigraphical and geochronological information. In addition, our data demonstrate that volcanoes were active on top of the growing Oligocene Alps.This study illustrates rigorous criteria for detrital mineral geochronology that are applicable to any geological setting, including magmatic arcs and collision orogens, and provides fundamental interpretive keys to solve complex puzzles and apparent paradoxes in geological reconstructions.  相似文献   

7.
《国际泥沙研究》2019,34(6):537-549
Dam removal can generate geomorphic disturbances, including channel bed and bank erosion and associated abrupt/pulsed release and downstream transfer of reservoir sediment, but the type and rate of geomorphic response often are hard to predict. The situation gets even more complex in systems which have been impacted by multiple dams and a long and complex engineering history. In previous studies one-dimensional (1-D) models were used to predict aspects of post-removal channel change. However, these models do not consider two-dimensional (2-D) effects of dam removal such as bank erosion processes and lateral migration. In the current study the impacts of multiple dams and their removal on channel evolution and sediment delivery were modeled by using a 2-D landscape evolution model (CAESAR-Lisflood) focusing on the following aspects: patterns, rates, and processes of geomorphic change and associated sediment delivery on annual to decadal timescales. The current modeling study revealed that geomorphic response to dam removal (i.e., channel evolution and associated rates of sediment delivery) in multiple dam settings is variable and complex in space and time. Complexity in geomorphic system response is related to differences in dam size, the proximity of upstream dams, related buffering effects and associated rates of upstream sediment supply, and emerging feedback processes as well as to the presence of channel stabilization measures. Modeled types and rates of geomorphic adjustment, using the 2-D landscape evolution model CAESAR-Lisflood, are similar to those reported in previous studies. Moreover, the use of a 2-D method showed some advantages compared to 1-D models, generating spatially varying patterns of erosion and deposition before and after dam removal that provide morphologies that are more readily comparable to field data as well as features like the lateral re-working of past reservoir deposits which further enables the maintenance of sediment delivery downstream.  相似文献   

8.
Structural settings and lithological characteristics are traditionally assumed to influence the development of erosional landforms, such as gully networks and rock couloirs, in steep mountain rock basins. The structural control of erosion of two small alpine catchments of distinctive rock types is evaluated by comparing the correspondences between the orientations of their gullies and rock couloirs with (1) the sliding orientations of potential slope failures mechanisms, and (2) the orientation of the maximum joint frequency, this latter being considered as the direction exploited primarily by erosion and mass wasting processes. These characteristic orientations can be interpreted as structural weaknesses contributing to the initiation and propagation of erosion. The morphostructural analysis was performed using digital elevation models and field observations. The catchment comprised of magmatic intrusive rocks shows a clear structural control, mostly expressed through potential wedges failure. Such joint configurations have a particular geometry that encourages the development of gullies in hard rock, e.g. through enhanced gravitational and hydrological erosional processes. In the catchment underlain by sedimentary rocks, penetrative joints that act as structural weaknesses seem to be exploited by gullies and rock couloirs. However, the lithological setting and bedding configuration prominently control the development of erosional landforms, and influence not only the local pattern of geomorphic features, but the general morphology of the catchment. The orientations of the maximum joint frequency are clearly associated with the gully network, suggesting that its development is governed by anisotropy in rock strength. These two catchments are typical of bedrock‐dominated basins prone to intense processes of debris supply. This study suggests a quantitative approach for describing the relationship between bedrock jointing and geomorphic features geometry. Incorporation of bedrock structure can be relevant when studying processes governing the transfer of clastic material, for the assessment of sediment yields and in landforms evolution models. Copyright © 2012 John Wiley & Sons, Ltd.  相似文献   

9.
Knowledge and understanding of shore platform erosion and tidal notch development in the tropics and subtropics relies mainly on short‐term studies conducted on recently deposited carbonate rocks, predominantly Holocene and Quaternary reef limestones and aeolianites. This paper presents erosion rates, measured over a 10 year period on notches and platforms developed on the Permian, Ratburi limestone at Phang Nga Bay, Thailand. In so doing it contributes to informing a particular knowledge gap in our understanding of the erosion dynamics of shore platform and tidal notch development in the tropics and subtropics – notch erosion rates on relatively hard, ancient limestones measured directly on the rock surface using a micro‐erosion meter (MEM) over time periods of a decade or more. The average intertidal erosion rate of 0.231 mm/yr is lower than erosion rates measured over 2–3 years on recent, weaker carbonate rocks. Average erosion rates at Phang Nga vary according to location and site and are, in rank order from highest to lowest: Mid‐platform (0.324 mm/yr) > Notch floor (0.289 mm/yr) > Rear notch wall (0.228 mm/yr) > Lower platform (0.140 mm/yr) > Notch roof (0.107 mm/yr) and Supratidal (0.095 mm/yr). The micro‐relief of the eroding rock surfaces in each of these positions exhibits marked differences that are seemingly associated with differences in dominant physical and bio‐erosion processes. The results begin to help inform knowledge of longer term shore platform erosion dynamics, models of marine notch development and have implications for the use of marine notches as indicators of changes in sea level and the duration of past sea levels. Copyright © 2014 John Wiley & Sons, Ltd.  相似文献   

10.
How rock resistance or erodibility affects fluvial landforms and processes is an outstanding question in geomorphology that has recently garnered attention owing to the recognition that the erosion rates of bedrock channels largely set the pace of landscape evolution. In this work, we evaluate valley width, terrace distribution, and bedload provenance in terms of reach scale variation in lithology in the study reach and discuss the implications for landscape evolution in a catchment with relatively flat‐lying stratigraphy and very little uplift. A reach of the Buffalo National River in Arkansas was partitioned into lithologic reaches and the mechanical and chemical resistance of the main lithologies making up the catchment was measured. Valley width and the spatial distribution of terraces were compared among the different lithologic reaches. The surface grain size and provenance of coarse (2–90 mm) sediment of both modern gravel bars and older terrace deposits that make up the former bedload were measured and defined. The results demonstrate a strong impact of lithology upon valley width, terrace distribution, and bedload provenance and therefore, upon landscape evolution processes. Channel down‐cutting through different lithologies creates variable patterns of resistance across catchments and continents. Particularly in post‐tectonic and non‐tectonic landscapes, the variation in resistance that arises from the exhumation of different rocks in channel longitudinal profiles can impact local base levels, initiating responses that can be propagated through channel networks. The rate at which that response is transmitted through channels is potentially amplified and/or mitigated by differences between the resistance of channel beds and bedload sediment loads. In the study reach, variation in lithologic resistance influences the prevalence of lateral and vertical processes, thus producing a spatial pattern of terraces that reflects rock type rather than climate, regional base level change, or hydrologic variability. Copyright © 2017 John Wiley & Sons, Ltd.  相似文献   

11.
Research in landscape evolution over millions to tens of millions of years slowed considerably in the mid‐20th century, when Davisian and other approaches to geomorphology were replaced by functional, morphometric and ultimately process‐based approaches. Hack's scheme of dynamic equilibrium in landscape evolution was perhaps the major theoretical contribution to long‐term landscape evolution between the 1950s and about 1990, but it essentially ‘looked back’ to Davis for its springboard to a viewpoint contrary to that of Davis, as did less widely known schemes, such as Crickmay's hypothesis of unequal activity. Since about 1990, the field of long‐term landscape evolution has blossomed again, stimulated by the plate tectonics revolution and its re‐forging of the link between tectonics and topography, and by the development of numerical models that explore the links between tectonic processes and surface processes. This numerical modelling of landscape evolution has been built around formulation of bedrock river processes and slope processes, and has mostly focused on high‐elevation passive continental margins and convergent zones; these models now routinely include flexural and denudational isostasy. Major breakthroughs in analytical and geochronological techniques have been of profound relevance to all of the above. Low‐temperature thermochronology, and in particular apatite fission track analysis and (U–Th)/He analysis in apatite, have enabled rates of rock uplift and denudational exhumation from relatively shallow crustal depths (up to about 4 km) to be determined directly from, in effect, rock hand specimens. In a few situations, (U–Th)/He analysis has been used to determine the antiquity of major, long‐wavelength topography. Cosmogenic isotope analysis has enabled the determination of the ‘ages’ of bedrock and sedimentary surfaces, and/or the rates of denudation of these surfaces. These latter advances represent in some ways a ‘holy grail’ in geomorphology in that they enable determination of ‘dates and rates’ of geomorphological processes directly from rock surfaces. The increasing availability of analytical techniques such as cosmogenic isotope analysis should mean that much larger data sets become possible and lead to more sophisticated analyses, such as probability density functions (PDFs) of cosmogenic ages and even of cosmogenic isotope concentrations (CICs). PDFs of isotope concentrations must be a function of catchment area geomorphology (including tectonics) and it is at least theoretically possible to infer aspects of source area geomorphology and geomorphological processes from PDFs of CICs in sediments (‘detrital CICs’). Thus it may be possible to use PDFs of detrital CICs in basin sediments as a tool to infer aspects of the sediments' source area geomorphology and tectonics, complementing the standard sedimentological textural and compositional approaches to such issues. One of the most stimulating of recent conceptual advances has followed the considerations of the relationships between tectonics, climate and surface processes and especially the recognition of the importance of denudational isostasy in driving rock uplift (i.e. in driving tectonics and crustal processes). Attention has been focused very directly on surface processes and on the ways in which they may ‘drive’ rock uplift and thus even influence sub‐surface crustal conditions, such as pressure and temperature. Consequently, the broader geoscience communities are looking to geomorphologists to provide more detailed information on rates and processes of bedrock channel incision, as well as on catchment responses to such bedrock channel processes. More sophisticated numerical models of processes in bedrock channels and on their flanking hillslopes are required. In current numerical models of long‐term evolution of hillslopes and interfluves, for example, the simple dependency on slope of both the fluvial and hillslope components of these models means that a Davisian‐type of landscape evolution characterized by slope lowering is inevitably ‘confirmed’ by the models. In numerical modelling, the next advances will require better parameterized algorithms for hillslope processes, and more sophisticated formulations of bedrock channel incision processes, incorporating, for example, the effects of sediment shielding of the bed. Such increasing sophistication must be matched by careful assessment and testing of model outputs using pre‐established criteria and tests. Confirmation by these more sophisticated Davisian‐type numerical models of slope lowering under conditions of tectonic stability (no active rock uplift), and of constant slope angle and steady‐state landscape under conditions of ongoing rock uplift, will indicate that the Davis and Hack models are not mutually exclusive. A Hack‐type model (or a variant of it, incorporating slope adjustment to rock strength rather than to regolith strength) will apply to active settings where there is sufficient stream power and/or sediment flux for channels to incise at the rate of rock uplift. Post‐orogenic settings of decreased (or zero) active rock uplift would be characterized by a Davisian scheme of declining slope angles and non‐steady‐state (or transient) landscapes. Such post‐orogenic landscapes deserve much more attention than they have received of late, not least because the intriguing questions they pose about the preservation of ancient landscapes were hinted at in passing in the 1960s and have recently re‐surfaced. As we begin to ask again some of the grand questions that lay at the heart of geomorphology in its earliest days, large‐scale geomorphology is on the threshold of another ‘golden’ era to match that of the first half of the 20th century, when cyclical approaches underpinned virtually all geomorphological work. Copyright © 2007 John Wiley & Sons, Ltd.  相似文献   

12.
It has been long hypothesized that topography, as well as climate and rock strength, exert first order controls on erosion rates. Here we use detrital cosmogenic 10Be from 50 basins, ranging in size from 1 to 150 km2, to measure millennial erosion rates across the San Gabriel Mountains in southern California, where a strong E–W gradient in relief compared to weak variation in precipitation and lithology allow us to isolate the relationship between topographic form and erosion rate. Our erosion rates range from 35 to 1100 m/Ma, and generally agree with both decadal sediment fluxes and long term exhumation rates inferred from low temperature thermochronometry. Catchment-mean hillslope angle increases with erosion rate until ～ 300 m/Ma, at which point slopes become invariant with erosion rate. Although this sort of relation has been offered as support for non-linear models of soil transport, we use 1-D analytical hillslope profiles derived from existing soil transport laws to show that a model with soil flux linear in slope, but including a slope stability threshold, is indistinguishable from a non-linear law within the scatter of our data. Catchment-mean normalized channel steepness index increases monotonically, though non-linearly, with erosion rate throughout the San Gabriel Mountains, even where catchment-mean hillslope angles have reached a threshold. This non-linearity can be mostly accounted for by a stochastic threshold incision model, though additional factors likely contribute to the observed relationship between channel steepness and erosion rate. These findings substantiate the claim that the normalized channel steepness index is an important topographic metric in active ranges.  相似文献   

13.
To reveal river channel steepness patterns and variance in settings with significant variation in rock uplift rate, rock erodibility and moving water divides, we present a series of graphical methods to interpret channel profiles. To complement Cartesian χ plots, longitudinal profiles and mapping methods, we introduce a new method based on a radial coordinate system. We map each basin onto polar coordinates in which the radial dimension is χ and the azimuthal coordinate, ?, is calculated with an increment (Δ?) scaled to the distance to neighboring channel heads. The elevation is contoured on this mapping. Average channel steepness is estimated by fitting a conical surface to the elevation. The graph simplifies the comparison of χ and elevation between channels that share a divide, and helps identify spatial changes in drainage area and patterns of erodibility. We apply this approach to derive the uplift pattern in the eastern and southern Central Range of Taiwan, where the high tectonic convergence and uplift rates combined with sub‐tropical climate and frequent typhoons results in high exhumation rate, and well‐developed, detachment‐limited river networks. Additionally, the tectonic activity leads to drainage basin reorganization. We identify examples of divide migration, discrete river capture as well as anomalous steepness that we attribute to local variability in rock erodibility. Estimated basin‐average steepness values show the highest and a near constant value from Hsinwulu basin to Liwu basin in the center of the Island. To the north and south of this region, the values gradually decrease. These estimates show good correlation with the topography of the Central Range and erosion rates derived from in situ 10Be concentrations in river‐borne quartz. We conclude that the basin steepness reflects systematic differences in rock uplift rate and erosion rate. Copyright © 2016 John Wiley & Sons, Ltd.  相似文献   

14.
Deposits within caves are often used to interpret past landscape evolution and climate conditions. However, cave passage shapes also preserve information about past conditions. Despite the usefulness of passage shape, no previous models simulate cave cross-section evolution in a realistic manner. Here we develop a model for evolving cave passage cross-sections using a shear stress estimation algorithm and a shear stress erosion rule. Our model qualitatively duplicates observed cave passage shapes so long as erosion rates vary with shear stress, as in the case of transport limited dissolution or mechanical erosion. This result provides further evidence that erosion rates within caves are not typically limited by surface reaction rates, even though current speleogenesis models predict surface-rate limitation under most turbulent flow conditions. By adding sediment transport and alluviation to the model we successfully simulate paragenetic channels. Simulations duplicate the hypothesized dynamics of paragenesis, whereby: 1) the cross-section of a phreatic passage grows until shear stress is sufficiently reduced that alluviation occurs, 2) the floor of the passage becomes armored and erosion continues on the ceiling and walls, 3) negative feedback produces an equilibrium cross-sectional area such that shear stress is sufficient to transport incoming sediment. We derive an approximate scaling relationship that indicates that equilibrium paragenetic channel width scales with the square root of discharge, and weakly with the inverse of sediment supply. Simulations confirm this relationship and show that erosion mechanism, sediment size, and roughness are secondary controls. The inverse scaling of width with sediment supply in paragenetic channels contrasts with surface bedrock channels, which respond to larger sediment supplies by widening. Our model provides a first step in simulating cave cross-section evolution and points to the need for a better understanding of the dominant erosion mechanisms in soluble bedrock channels. © 2020 John Wiley & Sons, Ltd.  相似文献   

15.
The Piedmont upland of Maryland has been variously interpreted as a peneplain, a series of peneplains, a surface of marine planation, and a landscape in dynamic equilibrium. These different perspectives of landform evolution are related to different scales of time and space. Both equilibrium and episodic erosion features can be recognized in the modern landscape. An equilibrium condition is suggested by adjustment of first and second order streams to rock structure and lithology, entrenchment of some streams against gneiss domes, altitudinal zonation of rock types around gneiss domes, correlation of lithology with overburden thickness on uplands, decreasing overburden thickness on uplands related to decreasing degree of metamorphism of crystalline rocks, and correlation of secondary mineral assemblages with subsurface drainage and slope. The long-term episodic character of erosion is suggested by clastic wedges on the adjacent Coastal Plain, an upland of low relief that truncates non-carbonate rocks of different lithologies, isovolumetric chemical weathering of alumino-silicate rocks, clastic deposition in marble valleys, and weathering profile truncation by modern drainage. The Maryland Piedmont may have been an area of positive relief subject to subaerial erosion since Triassic and possibly Permian time. The upland surface preserved in the eastern Piedmont developed by the Late Cretaceous. In the interval from the Late Cretaceous to the Late Miocene, low input of terrigenous sediments to the Coastal Plain, dominance of marine sedimentation, and spotty evidence of saprolite formation on crystalline rocks, suggest that the Maryland Piedmont was an area of low relief undergoing intense weathering. Incised valleys were formed during a cycle of erosion probably initiated in the Late Miocene and extensive colluvial sediments were deposited on hillslopes by periglacial processes during the Pleistocene.  相似文献   

16.
This study examined the variation in soil erodibility along hillslopes in a Prairie landscape. The soil loss produced by simulated rainfall on undisturbed soils was used as an index of relative soil erodibility. Relative erodibility, and several soil properties, were measured at the summit, shoulder, midslope footslope and toeslope of 11 slope transects in an area of cultivated grassland soils on hummocky glacial till. The variation of erodibility with slope position was statistically significant, and slope position explained about 40 per cent of the variation in the erodibility measurements. Erodibility was 14 per cent higher on the shoulder and midslope, and 21 per cent lower on the toeslope, than on the summit and footslope. Local variation in erodibility along slopes was considered to be an important control on patterns of soil erosion in the landscape. The variation of erodibility along the slopes reflected soil property trends. The greatest erodibility was associated with upper slope positions where soils tended to be shallow, coarse, poorly leached and low in organic matter, while lower erodibility was found at lower slope positions with deep, organic-rich and leached soils. Of the individual soil properties considered, silt and sand content were the most highly correlated with erodibility. The results, together with results from other studies, also suggest that net erosion and erodibility are positively related.  相似文献   

17.
The Southern Alps mountain chain, New Zealand, has formed as a consequence of late Cenozoic collision of the continental parts of the Pacific and Australia plates. Fission track analysis has yielded estimates of the amount, age of initiation, and rate of late Cenozoic rock uplift for 82 surface samples taken from transects across the Southern Alps. The mean surface, summit and valley elevations in the vicinity of each of the rock sample sites have also been measured. Regression of the geomorphic variables on the uplift variables has been used to establish quantitative relationships between uplift and geomorphology. There are strong and consistent linear associations between uplift and the elevations of the mean surface, summits and valleys. The preferred regression models have uniform slope but varying elevation response between transects. Substitution of space for time has allowed the evolution of landforms to be studied. To the east of the Main Divide, elevation and relief are proportional to, and closely related to, the age of initiation of rock uplift (‘uplift age’) and the amount of rock uplift (r2 > 0·8). Mean surface uplift was delayed for ～2 Ma after the start of rock uplift, a result of the stripping of a soft cover rock succession that, prior to rock uplift, overlaid the harder greywacke basement. Inter-transect variations in regression response and x-intercept are inferred, therefore, to reflect the variable preuplift thickness of cover rocks. However, the regular regression slope for the transects reflects the consistent nature of the interaction between uplift and the erodibility of greywacke basement. Uplift of the mean surface proceeded at 0·4 km/km and 0·4 km/Ma of rock uplift, while the rock uplift rate was 0·8 km/Ma. Summit elevations have increased at a rate of 0·6 km/Ma and valley elevations have increased at 0·2 km/Ma. Regression lines relating mean surface, summit and valley elevations to rock uplift and uplift age diverge from common intercepts; it is concluded, therefore, that the mountains east of the Main Divide have continued to increase in elevation and relief and change in form over time since the start of mean surface uplift. Mountain elevation has little relationship with late Cenozoic mean rock uplift rates of 0·8–1·0 km/Ma or inferred contemporary rock uplift rates (r2 ～ 0·3). In contrast, to the west of the Main Divide, elevation is shown to be closely related to rock uplift rate (r2 > 0·3). In contrast, to the west of the Main Divide, elevation is shown to be closely related to rock uplift rate (r2 > 0·8). Transects with higher rock uplift rates support higher topography. Landforms are therefore in a stable equilibrium with rock uplift rate, and the landscape contains no residual evidence of the total amount of rock uplift, or the age of uplift. Lithological variation appears to have no relationship with elevation.  相似文献   

18.
Landscape evolution in northern New England is characterized by the persistence of landforms over long time periods. The topography in the study area was initiated by Paleozoic diapiric intrusion of granitic rocks as highs within metasedimentary and volcanic rocks. This framework was probably reinforced by differences in the resistance of the massive igneous and the fractured metasedimentary rocks to erosion. As a result, both the Tertiary and present-day relief of the area consists of uplands developed on granitic rocks partly overlain by Paleozoic volcanic rocks, and lowlands developed on Paleozoic metasediments. Extensive volcanism in the Tertiary had only a minimal effect on this relationship. A significant impact of Tertiary volcanism, however, was the diversion of major streams across topographic highs. Despite 19-35 Ma of incision, these streams are still far from establishing equilibrium profiles and dissecting the highs. The persistence of topography for a timescale of the same order of magnitude as that conventionally thought to be required for planation is due to reduced denudation rates in a passive tectonic setting and the presence of erosion-resistant Paleozoic igneous units. The latter influence is indicated by knickpoint persistence for 19-35 Ma on streams diverted across these rocks. Since it is generally considered that such disequilibria are short-lived features formed by Quaternary or ongoing deformation, this knickpoint persistence has important implications for landscape analyses that use disequilibria to assess recent tectonism in a landscape.  相似文献   

19.
P. I. A. Kinnell 《水文研究》2005,19(14):2815-2844
Raindrop‐impact‐induced erosion is initiated when detachment of soil particles from the surface of the soil results from an expenditure of raindrop energy. Once detachment by raindrop impact has taken place, particles are transported away from the site of the impact by one or more of the following transport processes: drop splash, raindrop‐induced flow transport, or transport by flow without stimulation by drop impact. These transport processes exhibit varying efficiencies. Particles that fall back to the surface as a result of gravity produce a layer of pre‐detached particles that provides a degree of protection against the detachment of particles from the underlying soil. This, in turn, influences the erodibility of the eroding surface. Good understanding of rainfall erosion processes is necessary if the results of erosion experiments are to be properly interpreted. Current process‐based erosion prediction models do not deal with the issue of temporal variations in erodibility during a rainfall event or variabilities in erodibility associated with spatial changes in dominance of the transport processes that follow detachment by drop impact. Although more complex erosion models may deal with issues like this, their complexity and high data requirement may make them unsuitable for use as general prediction tools. Copyright © 2005 John Wiley & Sons, Ltd.  相似文献   

20.
The watersheds along the north coast of California span a wide range of geologic settings, tectonic uplift rates, and historic timber harvest activity. Known trends in how each of these factors influence erosion rates provides an opportunity to examine their relative importance. We analyzed 71 watersheds within nine larger river basins, investigated the factors influencing suspended sediment rating curves (SRCs), investigated how SRCs varied among our study watersheds, and used Random Forest modeling (RFM) to determine which environmental characteristics and land management metrics influence SRC shapes, vertical offsets, and slopes. While SRCs typically take the form of a power function, they also can exhibit threshold or peak relationships. First, we found both power and threshold relationships for the SRCs within our study watersheds. Second, the SRC offsets and slopes systematically varied with regional tectonic uplift. Third, SRC offsets increased in several watersheds following intensive timber harvest events and SRC slopes decreased due to a greater relative increase in suspended sediment concentration at lower flows than higher flows. Our RFM correctly classified 96% of the SRC shapes using two near-channel metrics; near-channel precipitation-sensitive deep-seated landslide susceptibility and near-channel soil erodibility. Our RFM models also showed that timber harvest activity and near-channel local relief can explain 40% of the variability in SRC offsets, whereas tectonic uplift rates, millennial-scale erosion rates, and precipitation patterns explain 40% of the variability in SRC slopes.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号