共查询到20条相似文献，搜索用时 737 毫秒
1.
Bedload transport is a complex phenomenon that is not well understood, especially for poorly sorted sediment and low transport rates, which is what is typically found in alpine gravel-bed rivers. In this paper, the interaction between bedload rate, bed stability and flow is investigated using flume experiments. Significant differences in bedload rates were observed for experiments conducted on beds formed with the same gravel material but presenting diverse arrangements and bedforms. Tests were performed under regimes of low transport rate, which are mainly controlled by gravel-bed roughness. Different scales of roughness were identified using the statistical characteristics of detailed bed elevation measurements: grain, structure and large bedform scales. The role played by these different roughness scales in bedload dynamics was examined. For quasi-flat beds, bed stability was quantified using a combination of bed surface criteria describing grain and structure scales. It was found that bed stability affects the bedload rate directly and not only through its influence on the flow or on the incipient motion. For beds with large bedforms, the analysis of bedload dynamics also showed the importance of accounting for effective bed shear stress distributions. An empirical bedload model for low transport regimes was suggested. Compared with previous formulae developed for alpine rivers, this model accounts for bed stability and distribution of effective bed shear stress. It significantly improves the understanding of gravel dynamics over complex beds such as arranged beds or those with large bedforms. However, further tests are needed to use the model outside the range of conditions of this study. © 2019 John Wiley & Sons, Ltd. 相似文献
2.
Evolution of bed material mobility and bedload grain size distributions under a range of discharges is rarely observed in braiding gravel-bed rivers. Yet, the changing of bedload grain size distributions with discharge is expected to be different from laterally-stable, threshold, channels on which most gravel bedload theory and observation are based. Here, simultaneous observations of flow, bedload transport rate, and morphological change were made in a physical model of a gravel-bed braided river to document the evolution of grain size distributions and bed mobility over three experimental event hydrographs. Bedload transport rate and grain size distributions were measured from bedload samples collected in sediment baskets. Morphological change was mapped with high-resolution (~1 mm precision) digital elevation models generated from close-range digital photogrammetry. Bedload transport rates were extremely low below a discharge equivalent to ~50% of the channel-forming discharge (dimensionless stream power ~70). Fractional transport rates and plots of grain size distributions indicate that the bed experienced partial mobility at low discharge when the coarsest grains on the bed were immobile, weak selective mobility at higher discharge, and occasionally near-equal mobility at peak channel-forming discharge. The transition to selective mobility and increased bedload transport rates coincided with the lower threshold for morphological change measured by the morphological active depth and active width. Below this threshold discharge, active depths were of the order of D90 and active widths were narrow (< 3% of wetted width). Above this discharge, both increased so that at channel-forming discharge, the active depth had a local maximum of 9D90 while active width was up to 20% of wetted width. The modelled rivers approached equal mobility when rates of morphological change were greatest. Therefore, changes in the morphological active layer with discharge are directly connected to the conditions of bed mobility, and strongly correlated with bedload transport rate. © 2018 John Wiley & Sons, Ltd. 相似文献
3.
Limited field and flume data suggests that both uniform and graded beds appear to progressively stabilize when subjected to inter-flood flows as characterized by the absence of active bedload transport. Previous work has shown that the degree of bed stabilization scales with duration of inter-flood flow, however, the sensitivity of this response to bed surface grain size distribution has not been explored. This article presents the first detailed comparison of the dependence of graded bed stability on inter-flood flow duration. Sixty discrete experiments, including repetitions, were undertaken using three grain size distributions of identical D50 (4.8 mm); near-uniform (σg = 1.13), unimodal (σg = 1.63) and bimodal (σg = 2.08). Each bed was conditioned for between 0 (benchmark) and 960 minutes by an antecedent shear stress below the entrainment threshold of the bed (τ*c50). The degree of bed stabilization was determined by measuring changes to critical entrainment thresholds and bedload flux characteristics. Results show that (i) increasing inter-flood duration from 0 to 960 minutes increases the average threshold shear stress of the D50 by up to 18%; (ii) bedload transport rates were reduced by up to 90% as inter-flood duration increased from 0 to 960 minutes; (iii) the rate of response to changes in inter-flood duration in both critical shear stress and bedload transport rate is non-linear and is inversely proportional to antecedent duration; (iv) there is a grade dependent response to changes in critical shear stress where the magnitude of response in uniform beds is up to twice that of the graded beds; and (v) there is a grade dependent response to changes in bedload transport rate where the bimodal bed is most responsive in terms of the magnitude of change. These advances underpin the development of more accurate predictions of both entrainment thresholds and bedload flux timing and magnitude, as well as having implications for the management of environmental flow design. © 2019 John Wiley & Sons, Ltd. © 2019 John Wiley & Sons, Ltd. 相似文献
4.
Bedload transport is known to be a highly fluctuating temporal phenomenon, even under constant (mean) flow conditions, as a consequence of stochasticity, bedform migration, grain sorting, hysteresis, or sediment supply limitation. Because bedload transport formulas usually refer to a single mean transport value for a given flow condition, one can expect that prediction accuracy (when compared to measurements) will depend on the amplitude and duration of fluctuations, which in turn depend on the time scale used for observations. This paper aims to identify how the time scale considered can affect bedload prediction. This was done by testing 16 common bedload transport formulas with four data sets corresponding to different measurement period durations: (i) highly fluctuating (quasi‐)instantaneous field measurements; (ii) volumes accumulated at the event scale on two small alpine gravel‐bed rivers, potentially affected by seasonal fluctuations; (iii) volumes accumulated at the interannual scale in a meandering gravel bed river, thought to be weakly subject to fluctuations; (iv) time‐integrated flume measurements with nearly uniform sediments. The tests confirmed that the longer the measurement period, the better the precision of the formula's prediction interval. They also demonstrate several consequential limitations. Most threshold formulas are no longer valid when the flow condition is below two times the threshold condition for the largest elements' motion on the bed surface (considering D84). In such conditions, equations either predict zero transport, or largely overestimate the real transport, especially when D84 is high. There is a need for new sediment data collected with highly reliable techniques such as recording slot bedload samplers to further investigate this topic. Copyright © 2012 John Wiley & Sons, Ltd. 相似文献
5.
Passive acoustic monitoring of the self‐generated noise of particle impacts has been shown to be correlated to bedload flux and bedload size. However, few studies have concentrated on the role of acoustic wave propagation in a river. For the first time, the river environment is modeled as a Pekeris waveguide, where a wave number integration technique is used to predict the transformation of sounds through their propagation paths. Focusing on the distance of a hydrophone from the channel bed and cutting off the low frequencies produced by impacts between gravel particles, we demonstrate that acoustic propagation modifies the spectral content of bedload‐generated sound. Acoustic signals analyzed with the proposed model are interpreted by comparison to Helley–Smith bedload data obtained during flood conditions on the large gravel‐bedded Arc‐en‐Maurienne River, France. This study shows that careful attention to acoustic propagation effects is required when estimating bedload grain size distribution with hydrophones in rivers, especially for rivers with slopes higher than 1%. Bedload monitoring with a hydrophone is particularly appropriate for large gravel‐bed rivers – especially so during large floods, when in situ sampling is difficult or impractical and the impact of acoustic propagation is weaker relative to the self‐generated noise of bedload impacts. Copyright © 2017 John Wiley & Sons, Ltd. 相似文献
6.
This paper investigates variability in bedload transport and channel morphology for 11 replicate experimental runs in an approximately 1:50 braided river model. The experiments, each of 90 h duration, were carried out in a 20 × 3m tilting flume. All the experiments started with the same initial conditions. Bedload transport was measured at 5 min intervals in a collection drum at the exit from the flume. The model showed reasonable hydraulic similarity when compared to prototype rivers. Results show that mean bedload transport rates for the 11 runs vary in the range 0·98 to 1·49gs?1 (mean + 1·21, coefficient of variation 11 per cent). Within-run transport rates commonly vary from close to zero, to two and occasionally three or four times the mean rate. Within the bedload series, several irregular phases of transport intensity can be observed, but time series analysis of the data show little underlying serial structure (an AR(2) autoregressive model is appropriate). Channel patterns are narrow/braided, are established quickly and remain relatively stable throughout the runs, although channel widths increase between 20 and 103 per cent over the 11 runs. Channel behaviour varies from aggradational to transitional between aggradation and degradation. Time-averaged bedload transport rate is weakly correlated with braiding intensity. In general, these results demonstrate that for a given set of controlling variables, bedload transport and channel morphology can be approximately replicated. 相似文献
7.
Unsteady bedload transport was measured in two c. 5 m wide anabranches of a gravel‐bed braided stream draining the Haut Glacier d'Arolla, Switzerland, during the 1998 and 1999 melt seasons. Bedload was directly sampled using 152 mm square Helley–Smith type samplers deployed from a portable measuring bridge, and independent transport rate estimates for the coarser size fractions were obtained from the dispersion of magnetically tagged tracer pebbles. Bedload transport time series show pulsing behaviour under both marginal (1998) and partial (1999) transport regimes. There are generally weak correlations between transport rates and shear stresses determined from velocity data recorded at the measuring bridge. Characteristic parameters of the bedload grain‐size distributions (D50, D84) are weakly correlated with transport rates. Analysis of full bedload grain‐size distributions reveals greater structure, with a tendency for transport to become less size selective at higher transport rates. The bedload time series show autoregressive behaviour but are dif?cult to distinguish by this method. State–space plots, and associated measures of time‐series separation, reveal the structure of the time series more clearly. The measured pulses have distinctly different time‐series characteristics from those modelled using a one‐dimensional sediment routing model in which bed shear stress and grain size are varied randomly. These results suggest a mechanism of pulse generation based on irregular low‐amplitude bedforms, that may be generated in‐channel or may represent the advection of material supplied by bank erosion events. Copyright © 2003 John Wiley & Sons, Ltd. 相似文献
8.
Previous analyses have identified the active width of braided rivers, the bed area over which bed load flux and short‐term morphological change occurs, as an important element of braiding dynamics and predictions of bed load flux. Here we compare theoretical predictions of active width in gravel‐bed braided rivers with observations from Sunwapta River, and from a generic physical model of gravel braided rivers, to provide general observations of the variation in active width, and to develop an understanding of the causes of variation. Bed topography was surveyed daily along a 150 m reach of the pro‐glacial Sunwapta River for a total of four weeks during summer when flow was above threshold for morphological activity. In the laboratory, detailed digital elevation models (DEMs) were derived from photogrammetric survey at regular intervals during a constant discharge run. From the field and flume observations there is considerable local and circumstantial variation in active width, but also a general trend in average active width with increasing discharge. There is also a clear relationship of active width with active braiding index (number of active branches in the braided channel network), and with dimensionless stream power, which appears to be consistent across the range of data from field and physical models. Thus there is a link between active width and the river morphology and dynamics, and the possibility of a general relationship for estimating active width from channel pattern properties or reach‐scale stream power values, from which approximate bedload flux calculations may be made. The analysis also raises questions about differences between hydraulically‐based numerical model computations of instantaneous active width and observation of time‐integrated morphological active width. Understanding these differences can give insight into the nature of bedload transport in braided rivers and the relationship to morphological processes of braiding. Copyright © 2011 John Wiley & Sons, Ltd. 相似文献
9.
The incidence and nature of bedload transport during flood flows in coarse-grained alluvial channels
A continuous record reveals that the incidence of bedload in a coarse-grained river channel changes from flood to flood. Long periods of inactivity encourage the channel bed to consolidate sufficiently so that bedload is largely confined to the recession limb of the next flood-wave. But when floods follow each other closely, the bed material is comparatively loose and offers less resistance to entrainment. In this case, substantial amounts of bedload are generated on the rising limb. This is confirmed by values of bed shear stress or stream power at the threshold of initial motion which can be up to five times the overall mean in the case of isolated floods or those which are the first of the season. This produces a complicated relationship between flow parameters and bedload and explains some of the difficulties in establishing bedload rating curves for coarse-grained channels. Besides this, the threshold of initial motion is shown to occur at levels of bed shear stress three times those at the thresholds of final motion. This adds further confusion to attempts at developing predictive bedload equations and clearly indicates at least one reason why equations currently in use are unsatisfactory. Bedload is shown to be characterized by a series of pulses with a mean periodicity of 1.7 hours. In the absence of migrating bedforms, it is speculated that this well-documented pattern reflects the passage of kinematic waves of particles in a slow-moving traction carpet. The general pattern of bedload, including pulsations, is shown to occur more or less synchronously at different points across the stream channel. 相似文献
10.
A coupled hierarchical modeling approach to simulating the geomorphic response of river systems to anthropogenic climate change 
下载免费PDF全文
下载免费PDF全文 Sarah Praskievicz 《地球表面变化过程与地形》2015,40(12):1616-1630
Anthropogenic climate change is expected to change the discharge and sediment transport regime of river systems. Because rivers adjust their channels to accommodate their typical inputs of water and sediment, changes in these variables can potentially alter river morphology. In this study, a hierarchical modeling approach was developed and applied to examine potential changes in reach‐averaged bedload transport and spatial patterns of erosion and deposition for three snowmelt‐dominated gravel‐bed rivers in the interior Pacific Northwest. The modeling hierarchy was based on discharge and suspended‐sediment load from a basin‐scale hydrologic model driven by a range of downscaled climate‐change scenarios. In the field, channel morphology and sediment grain‐size data for all three rivers were collected. Changes in reach‐averaged bedload transport were estimated using the Bedload Assessment of Gravel‐bedded Streams (BAGS) software, and the Cellular Automaton Evolutionary Slope and River (CAESAR) model was used to simulate the spatial pattern of erosion and deposition within each reach to infer potential changes in channel geometry and planform. The duration of critical discharge was found to control bedload transport. Changes in channel geometry were simulated for the two higher‐energy river reaches, but no significant morphological changes were found for a lower‐energy reach with steep, cohesive banks. Changes in sediment transport and river morphology resulting from climate change could affect the management of river systems for human and ecological uses. Copyright © 2015 John Wiley & Sons, Ltd. 相似文献
11.
While clay and silt matrices of gravel‐bed rivers have received attention from ecologists concerned variously with the deteriorating environments of benthic and hyporheic organisms, their impact on sediment entrainment and transport has been explored less. A recent increase of such a matrix in the bed of Nahal Eshtemoa, an ephemeral river of the northern Negev, has more than doubled the boundary shear stress needed to initiate bedload, from 7 N m‐2 (τ* = 0.027) during the flash floods of 1991–2001 to 15 N m‐2 (τ* = 0.059) during those of 2008–2009. The relation between bedload flux and boundary shear stress continues to be well‐defined, but it is displaced. The matrix now contains a significant amount of silt and clay size material. The reasons for the increased entrainment threshold of bedload are explored. Large‐scale laser scanning of the dry bed reveals a reduction in grain‐scale morphological roughness, while artificial in situ tests of matrix integrity indicate considerable cohesion. The implications for adopting bed material sampling strategies that account for matrix development are assessed. Copyright © 2012 John Wiley & Sons, Ltd. 相似文献
12.
Bedload pulses in gravel-bed rivers have been widely reported in recent years and attempts have been made to relate them to channel morphology. Bedload transport and channel morphology were measured in a small-scale generic model of braided gravel-bed streams. Two experiments are described in which braided channels developed in a 14 m × 3 m sand tray. Total bedload output from the tray was weighed every 15 minutes. Stream bed geometry was surveyed every four hours. Pulses were observed in the bedload output time series, and were qualitatively related to the channel morphology immediately upstream of the measuring section. The Bagnold (1980) bedload equation generally overpredicts measured bedload transport rates when applied to channels that were in equilibrium or aggrading. Underprediction occurred when applied to degrading channels. Aggradation was associated with channel multiplication and bar deposition. Channel pattern simplification occurred when degradation took place, and bars emerged from the water flow. Development of phases of aggradation and degradation is dependent upon the three-dimensional geometry of the stream beds. Spatial and temporal feedback loops can be identified, enabling links between channel morphology and bedload transport rate to be directly identified. 相似文献
13.
There is growing acknowledgement of the interaction between animals and the river bed on which they live and the implications of biological activity for geomorphic processes. It has been observed that signal crayfish (Pacifastacus leniusculus) disturb gravel substrates, potentially promoting sediment transport and impacting ecological communities. However, the mechanisms involved and the extent of their impact remain poorly understood, especially in relation to other processes that affect grain mobility in gravel‐bed rivers. A series of flume experiments, using loose and water‐worked gravel beds of narrowly graded grain sizes that were exposed to 6 h of crayfish activity under low‐velocity flows, showed a substantial increase in the number of grains entrained by subsequent higher‐velocity flows when compared with control runs in which crayfish were never introduced. Crayfish alter the topography of their substrate by constructing pits and mounds, which affect grain protrusion. When walking and foraging, they also alter gravel fabric by reorienting and changing the friction angle of surface grains. In water‐worked surfaces, this fabric rearrangement is shown to lead to a statistically significant, partial reversal of the structuring that had been achieved by antecedent flow. For these previously water‐worked surfaces, the increase in entrainment arising from disturbance by crayfish was statistically significant, with grain transport nearly twice as great. This suggests that signal crayfish, an increasingly widespread invasive species in temperate latitudes beyond their native NW North America, have the potential to enhance coarse‐grained bedload flux by altering the surface structure of gravel river beds and reducing the stability of surface grains. This study illustrates further the importance of acknowledging the impact of mobile organisms in conditioning the river bed when assessing sediment entrainment mechanics in the context of predicting bedload flux. Copyright © 2011 John Wiley & Sons, Ltd. 相似文献
14.
Thomas Vetter 《地球表面变化过程与地形》2011,36(12):1647-1657
Riffle‐pool sequences are a common feature of gravel‐bed rivers. However, mechanisms of their generation and maintenance are still not fully understood. In this study a monitoring approach is employed that focuses on analysing cross‐sectional and longitudinal channel geometry of a large floodplain river (Vereinigte Mulde, Sachsen‐Anhalt, Germany) with a high temporal and spatial resolution, in order to conclude from stage‐dependant morphometric changes to riffle and pool maintaining processes. In accordance with previous authors, pool cross‐sections of the Mulde River are narrow and riffle cross‐sections are wide suggesting that they should rather be addressed as two general types of channel cross‐sections than solely as bedforms. At high flows, riffles and pools in the study reaches changed in length and height but not in position. Pools were scoured and riffles aggraded, a development which was reversed during receding flows below the threshold of 0·4Qbf (40% bankfull discharge). An index for the longitudinal amplitude of riffle‐pool sequences, the bed undulation intensity or bedform amplitude, is introduced and proved to be highly significant as a form parameter, its first derivative as a process parameter. The process of pool scour and riffle fill is addressed as bedform maintenance or bedform accentuation. It is indicated by increasing longitudinal bed amplitudes. According to the observed dynamics of bed amplitudes, maintenance of riffle‐pool sequences lags behind discharge peaks. Maximum bed amplitudes may be reached with a delay of several days after peak discharges. Increasing bed undulation intensity is interpreted to indicate bed mobility. Post‐flood decrease of the bed undulation intensity indicates a retrograde phase when transport from pools to riffles has ceased and bed mobility is restricted to riffle tails and heads of pools. This type of transport behaviour is referred to as disconnected mobility. The comparison of two river reaches, one with undisturbed sediment supply, the other with sediment deficit, suggests that high bed undulation intensity values at low flows indicate sediment deficit and potentially channel degrading conditions. It is more generally hypothesized that channel bed undulations constitute a major component of form roughness and that increased bed amplitudes are an important feature of channel bed adjustment to sediment deficit be it temporally during late floods or permanently due to a supply limitation of bedload. Copyright © 2011 John Wiley & Sons, Ltd. 相似文献
15.
Rolf Schruder 《地球表面变化过程与地形》1991,16(8):731-736
The local reach gradient of small gravel bed rivers (drainage area 0-8-110 km2) in the Eifel, West Germany, is adjusted to transport the river bed sediments. Transport of gravel becomes possible under high flow conditions (Shields entrainment factor ≈-03). Mean bed material size for riffle sections increases with distance downstream. For small drainage areas channel slope is a negative exponential function of drainage area, while for the larger region the additional influence of bedload size has to be considered. Good agreement with Hack's data (1957) for Virginia and Maryland, U.S.A., is achieved (S = 0.0066 (D50/A)- 40., r = 0.67). 相似文献
16.
Development of new sensor systems for continuous bedload monitoring using a submerged load‐cell system (SLS) 下载免费PDF全文
下载免费PDF全文 Takahiro Itoh Takahiko Nagayama Rei Utsunomiya Masaharu Fujita Daizo Tsutsumi Shusuke Miyata Takahisa Mizuyama 《地球表面变化过程与地形》2018,43(8):1689-1700
It is important to evaluate bedload discharge and temporal changes of the bed surface, and bed deformation can be estimated during floods if the bedload discharge is properly evaluated in an arbitrary cross‐section. With the exception of grain size and its distribution within the bedload, bedload discharge has been measured using both direct and indirect methods. Bedload slot is a direct method but cannot be used to measure bedload during a flood because of volume limitations. Indirect methods require correlation between the signals and sediment volume measured using another method. In the present study, a small, automatically recording bedload sensor with an iron plate and a pair of load cells is developed in order to evaluate not only large particles but also sand particles as bedload. Bedload mass is calculated by integrating with respect to both the velocity of sediment particles and the averaged particle weight as measured by a pair of load cells, and, as an example, the velocity is estimated by the cross‐correlation function of weights measured by load cells. The applicability of the proposed sensor is discussed based on the results of flume tests in the laboratory (2014) and the observation flume of the Hodaka Sedimentation Observatory of Kyoto University in Japan (2015). The system was installed in the observation flume in November of 2012, and flume data were obtained using natural sediment particles. In particular, it was difficult to estimate the velocity of averaged bedload particles, and it was better to apply a cross‐correlation function in the laboratory tests. However, it appears that the previous estimation can estimate these velocities in the observation flume using a connecting tube and submerged load‐cell systems. Copyright © 2017 John Wiley & Sons, Ltd. 相似文献
17.
The variability in the morphological active width: Results from physical models of gravel‐bed braided rivers 下载免费PDF全文
下载免费PDF全文 The morphological active width, defined as the lateral extent of bed material displacement over time, is a fundamental parameter in multi‐threaded gravel‐bed rivers, linking complex channel dynamics to bedload transport. Here, results are presented from five constant discharge experiments, and three event hydrographs, covering a range of flow strengths and channel configurations for which morphological change, bedload transport rates, and stream power were measured in a physical model. Changes in channel morphology were determined via differencing of photogrammetrically‐derived digital elevation models (DEMs) of the model surface generated at regular intervals over the course of ~115 h of experimental runs. Independent measures of total bedload output were made using downstream sediment baskets. Results indicate that the morphological active width increases with total and dimensionless stream power and is strongly and positively correlated with bulk change (total volume of bed material displaced over time) and active braiding intensity (ABI). Although there is considerable scatter due to the inherent variability in braided river morphodynamics, the active width is positively correlated with independent measurements of bedload transport rate. Active width, bulk change, and bedload transport rates were all negligible below a dimensionless stream power threshold value of ~ 0.09, above which all increase with flow strength. Therefore, the active width could be used as a general predictor of bulk change and bedload transport rates, which in turn could be approximated from total and dimensionless stream power or ABI in gravel‐bed braided rivers. Furthermore, results highlight the importance of the active width, rather than the morphological active depth, in predicting volumes of change and bedload transport rates. The results contribute to the larger goals of better understanding braided river morphodynamics, creating large high‐resolution datasets of channel change for model calibration and validation, and developing morphological methods for predicting bedload transport rates in braiding river systems. Copyright © 2018 John Wiley & Sons, Ltd. 相似文献
18.
Marcel Liedermann Philipp Gmeiner Andrea Kreisler Michael Tritthart Helmut Habersack 《地球表面变化过程与地形》2018,43(2):514-523
A comprehensive monitoring programme focusing on bedload transport behaviour was conducted at a large gravel‐bed river. Innovative monitoring strategies were developed during five years of preconstruction observations accompanying a restoration project. A bedload basket sampler was used to perform 55 cross‐sectional measurements, which cover the entire water discharge spectrum from a 200‐year flood event in 2013 to a rare low flow event. The monitoring activities provide essential knowledge regarding bedload transport processes in large rivers. We have identified the initiation of motion under low flow conditions and a decrease in the rate of bedload discharge with increasing water discharge around bankfull conditions. Bedload flux strongly increases again during high flood events when the entire inundation area is flooded. No bedload hysteresis was observed. The effective discharge for bedload transport was determined to be near mean flow conditions, which is therefore at a lower flow discharge than expected. A numerical sediment transport model was able to reproduce the measured sediment transport patterns. The unique dataset enables the characterisation of bedload transport patterns in a large and regulated gravel‐bed river, evaluation of modern river engineering measures on the Danube, and, as a pilot project has recently been under construction, is able to address ongoing river bed incision, unsatisfactory ecological conditions for the adjacent national park and insufficient water depths for inland navigation. Copyright © 2017 John Wiley & Sons, Ltd. 相似文献
19.
An advanced signal processing technique for deriving grain size information of bedload transport from impact plate vibration measurements 总被引：1，自引：0，他引：1 下载免费PDF全文
下载免费PDF全文 A reliable characterization of bedload transport is required to gauge the engineering and theoretical issues related to the dynamics of sediments transport in rivers. However, while significant advances have been made in the development of monitoring techniques, robust quantitative predictive relationships have proven difficult to derive. In this article, we develop a dedicated signal processing technique aimed at improving the usage of impact plate measurements for material transport characterization. Our set‐up consists of a piezoelectric hydrophone mounted on the bottom side of a stainless steel plate, thus acting as a ‘sediment vibration sensor’. While the classical analysis with such systems is usually limited to rather simple procedures, such as impact counting, a large amount of useful information is contained in the actual waveform of the impact signal, which conveys the force and the contact time that the bedload imposes on the plate. An advanced signal processing technique called ‘first arrival atomic decomposition’ is used to improve the characterization of bedload transport by analysing the amplitude and frequency attributes of each single impact. This new processing approach proves to be well suited for bedload transport monitoring using plate systems and allows us to establish a relationship between the median grain size (D50) and the impact signal properties. This link is first observed and validated with controlled flume experiments and then applied to continuous impact records in a small gravel‐bed river during a flood event. The estimated D50 offers a novel possibility to observe the time‐varying grain size distribution of bedload transport. Copyright © 2014 John Wiley & Sons, Ltd. 相似文献
20.
Edwin R.C. Baynes Dimitri Lague Philippe Steer Stéphane Bonnet Luc Illien 《地球表面变化过程与地形》2020,45(14):3714-3731
Sediment supply (Qs) is often overlooked in modelling studies of landscape evolution, despite sediment playing a key role in the physical processes that drive erosion and sedimentation in river channels. Here, we show the direct impact of the supply of coarse-grained, hard sediment on the geometry of bedrock channels from the Rangitikei River, New Zealand. Channels receiving a coarse bedload sediment supply are systematically (up to an order of magnitude) wider than channels with no bedload sediment input for a given discharge. We also present physical model experiments of a bedrock river channel with a fixed water discharge (1.5 l min−1) under different Qs (between 0 and 20 g l−1) that allow the quantification of the role of sediment in setting the width and slope of channels and the distribution of shear stress within channels. The addition of bedload sediment increases the width, slope and width-to-depth ratio of the channels, and increasing sediment loads promote emerging complexity in channel morphology and shear stress distributions. Channels with low Qs are characterized by simple in-channel morphologies with a uniform distribution of shear stress within the channel while channels with high Qs are characterized by dynamic channels with multiple active threads and a non-uniform distribution of shear stress. We compare bedrock channel geometries from the Rangitikei and the experiments to alluvial channels and demonstrate that the behaviour is similar, with a transition from single-thread and uniform channels to multiple threads occurring when bedload sediment is present. In the experimental bedrock channels, this threshold Qs is when the input sediment supply exceeds the transport capacity of the channel. Caution is required when using the channel geometry to reconstruct past environmental conditions or to invert for tectonic uplift rates, because multiple configurations of channel geometry can exist for a given discharge, solely due to input Qs. © 2020 The Authors. Earth Surface Processes and Landforms published by John Wiley & Sons Ltd 相似文献