首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 234 毫秒
1.
  相似文献   

2.
Historical archives of grey‐scale river channel imagery are extensive. Here, we present and test a methodology to extract detailed quantitative topographic data from such imagery of sand‐bed rivers. Extracting elevation information from rivers is difficult as they are characterized by a low relative relief (<4 m); the area of interest may be spatially extensive (e.g. active channel widths >500 m in large braided rivers); the rate of change of surface elevation is generally low except in the vicinity of individual channel banks where the rate of change is very high; there is the complication that comes from inundation; and there may be an added complication caused by blockage of the field of view by vegetation. Here, we couple archival photogrammetric techniques with image processing methods and test these for quantification of sand‐bed braided river dynamics, illustrated for a 500 m wide, 3 km long reach of the South Saskatchewan River, Canada. Digital photogrammetry was used to quantify dry areas and water edge elevations. A methodology was then used to calibrate the spectral signature of inundated areas by combining established two media digital photogrammetric methods and image matching. This allowed determination of detailed depth maps for inundated areas and, when combined with dry area data, creation of complete digital elevation models. Error propagation methods were used to determine the erosion and deposition depths detectable from sequential digital elevation models. The result was a series of elevation models that demonstrate the potential for acquiring detailed and precise elevation data from any historical aerial imagery of rivers without needing associated calibration data, provided that imagery is of the necessary scale to capture the features of interest. We use these data to highlight several aspects of channel change on the South Saskatchewan River, including bar movement, bank erosion and channel infilling. Copyright © 2010 John Wiley & Sons, Ltd.  相似文献   

3.
River ecological functioning can be conceptualized according to a four‐dimensional framework, based on the responses of aquatic and riparian communities to hydrogeomorphic constraints along the longitudinal, transverse, vertical and temporal dimensions of rivers. Contemporary riparian vegetation responds to river dynamics at ecological timescales, but riparian vegetation, in one form or another, has existed on Earth since at least the Middle Ordovician (c. 450 Ma) and has been a significant controlling factor on river geomorphology since the Late Silurian (c. 420 Ma). On such evolutionary timescales, plant adaptations to the fluvial environment and the subsequent effects of these adaptations on fluvial sediment and landform dynamics resulted in the emergence, from the Silurian to the Carboniferous, of a variety of contrasted fluvial biogeomorphic types where water flow, morphodynamics and vegetation interacted to different degrees. Here we identify several of these types and describe the consequences for biogeomorphic structure and stability (i.e. resistance and resilience), along the four river dimensions, of feedbacks between riparian plants and hydrogeomorphic processes on contrasting ecological and evolutionary timescales. Copyright © 2014 John Wiley & Sons, Ltd.  相似文献   

4.
We test the acquisition of high‐resolution topographic and terrain data using hand‐held smartphone technology, where the acquired images can be processed using technology freely available to the research community. This is achieved by evaluating the quality of digital terrain models (DTM) of a river bank and an Alpine alluvial fan generated with a fully automated, free‐to‐use, structure‐from‐motion package and a smartphone integrated camera (5 megapixels) with terrestrial laser scanning (TLS) data used to provide a benchmark. To evaluate this approach a 16.2‐megapixel digital camera and an established, commercial, close‐range and semi‐automated software are also employed, and the product of the four combinations of the two types of cameras and software are compared. Results for the river bank survey demonstrate that centimetre‐precision DTMs can be achieved at close range (10 m or less), using a smartphone camera and a fully automated package. Results improve to sub‐centimetre precision with either higher‐resolution images or by applying specific post‐processing techniques to the smartphone DTMs. Application to an entire Alpine alluvial fan system shows the degradation of precision scales linearly with image scale, but that (i) the expected level of precision remains and (ii) difficulties in separating vegetation and sediment cover within the results are similar to those typically found when using other photo‐based techniques and laser scanning systems. Copyright © 2014 John Wiley & Sons, Ltd.  相似文献   

5.
Riparian vegetation responds to hydrogeomorphic disturbances and environmental changes and also controls these changes. Here, we propose that the control of sediment erosion and deposition by riparian vegetation is a key geomorphological and ecological (i.e. biogeomorphic) function within fluvial corridors. In a 3 year study, we investigated the correlations between riparian vegetation and hydrogeomorphic dynamics along a transverse gradient from the main channel to the floodplain of the River Tech, France. Sediment erosion and deposition rates varied significantly along the transverse gradient as a function of the vegetation biovolume intercepting water flow. These effects, combined with the extremely strong mechanical resistance of pioneer woody structures and strong resilience of pioneer labile herbaceous communities, Populus nigra and Salix spp., explain the propensity of biogeomorphic succession (i.e. the synergy between vegetation succession and landform construction) to progress between destructive floods. This geomorphological function newly identified as an ‘ecosystem function’ per se encompasses the coupling of habitat and landform creation, maintenance and change with fundamental ecosystem structural changes in space and in time. Three different biogeomorphic functions, all related to the concept of ecosystem engineering, were identified: (i) the function of pioneer herbaceous communities to retain fine sediment and diaspores in the exposed zones of the active tract near the water resource, facilitating recruitment of further herbaceous and Salicacea species; (ii) the function of woody vegetation to drive the construction of forested islands and floodplains; and (iii) the function of stabilised riparian forests to act as ‘diversity reservoirs’ which can support regeneration after destructive floods. Overall, this study based on empirical data points to the fundamental importance of sediment flow control by pioneer riparian vegetation in defining fluvial ecosystem and landform organisation in time and in space. Copyright © 2009 John Wiley & Sons, Ltd.  相似文献   

6.
The production of topographic datasets is of increasing interest and application throughout the geomorphic sciences, and river science is no exception. Consequently, a wide range of topographic measurement methods have evolved. Despite the range of available methods, the production of high resolution, high quality digital elevation models (DEMs) requires a significant investment in personnel time, hardware and/or software. However, image‐based methods such as digital photogrammetry have been decreasing in costs. Developed for the purpose of rapid, inexpensive and easy three‐dimensional surveys of buildings or small objects, the ‘structure from motion’ photogrammetric approach (SfM) is an image‐based method which could deliver a methodological leap if transferred to geomorphic applications, requires little training and is extremely inexpensive. Using an online SfM program, we created high‐resolution digital elevation models of a river environment from ordinary photographs produced from a workflow that takes advantage of free and open source software. This process reconstructs real world scenes from SfM algorithms based on the derived positions of the photographs in three‐dimensional space. The basic product of the SfM process is a point cloud of identifiable features present in the input photographs. This point cloud can be georeferenced from a small number of ground control points collected in the field or from measurements of camera positions at the time of image acquisition. The georeferenced point cloud can then be used to create a variety of digital elevation products. We examine the applicability of SfM in the Pedernales River in Texas (USA), where several hundred images taken from a hand‐held helikite are used to produce DEMs of the fluvial topographic environment. This test shows that SfM and low‐altitude platforms can produce point clouds with point densities comparable with airborne LiDAR, with horizontal and vertical precision in the centimeter range, and with very low capital and labor costs and low expertise levels. Copyright © 2012 John Wiley & Sons, Ltd.  相似文献   

7.
The reduction of gravity-field related quantities (e.g., gravity anomalies, geoid heights) due to the topography plays a crucial role in both geodetic and geophysical applications, since in the former it is an intermediate step towards geoid prediction and in the latter it reveals lateral as well as radial density contrasts and infers the geology of the area under study. The computations are usually carried out by employing a DTM and/or a DBM, which describe the topography and bathymetry, respectively. Errors in these DTMs/DBMs will introduce errors in the computed topographic effects, while poor spatial resolution of the topography and bathymetry models will result in aliasing effects to both gravity anomalies and geoid heights, both influencing the accuracy of the estimated solutions. The scope of this work is twofold. First, a validation and accuracy assessment of the SRTM 3″ (90 m) DTM over Greece is performed through comparisons with existing global models as well as with the Greek 450 m national DTMs. Whenever a misrepresentation of the topography is identified in the SRTM data, it is “corrected” using the local 450 m DTM. This process resulted in an improved SRTM DTM called SRTMGr, which was then used to determine terrain effects to gravity field quantities. From the fine-resolution SRTMGr DTMs, coarser models of 15″, 30″, 1′, 2′ and 5′ have been determined in order to investigate aliasing effects on both gravity anomalies and geoid heights by computing terrain effects at variable spatial resolutions. From the results acquired in two test areas, it was concluded that SRTMGr provides similar results to the local DTM making the use of other older global DTMs obsolete. The study for terrain aliasing effects proved that when high-resolution and accuracy gravity and geoid models are needed, then the highest possible resolution DTM should be employed to compute the respective terrain effects. Based on the results acquired from two the test areas a corrected SRTMGr DTM has been compiled for the entire Greek territory towards the development of a new gravimetric geoid model. Results from that analysis are presented based on the well-known remove-compute-restore method, employing land and marine gravity data, EGM08 as a reference geopotential model and the SRTMGr DTM for the computation of the RTM effects.  相似文献   

8.
Populations of the riparian pioneer species Populus nigra L. which establish on alluvial bars within river channels modulate sediment dynamics and fluvial landforms. Dense cohorts of P. nigra have colonized gravel point bars along the channelized River Garonne, France, during the last 20 years and have enhanced the vertical, lateral and longitudinal development of the bars. For this period, the geomorphic characteristics of two wooded point bars on this laterally stable river are closely linked to the spatial distribution and intensity of establishment and resistance of different cohorts of P. nigra. Furthermore, P. nigra colonization dynamics were controlled by engineer effects of this same species. This relationship is illustrated by a significant correlation between key geomorphic and biological variables measured in situ and characterized with a set of four aerial photographs taken between 2000 and 2010. The development of wooded point bars, which are discrete biogeomorphic units, over the studied period, appear to result from a specific biogeomorphic positive feedback of matter aggregation and vegetation establishment related to sediment trapping and stabilization by pioneer engineer plants. We propose a conceptual model of biogeomorphic unit construction for channelized, lateral stable rivers. We consider the resultant biogeomorphic units as functional from an ecological point of view because P. nigra enhances at the cohort scale (i) its own inherent capacity to resist hydrogeomorphic disturbances, and (ii) its resilience capacity as a result of successful colonization, especially downstream of mature poplar stands. Copyright © 2016 John Wiley & Sons, Ltd.  相似文献   

9.
Various methods have been used to study soil redistribution in the Loam Belt of Belgium. These methods have had contrasting levels of spatial coverage and time-scale. Ideally, a technique to assess soil redistribution patterns should provide the determination of dense networks of X, Y and Z terrain coordinates (digital elevation models) at different time intervals. Sequential stereoscopic aerial photographs contain this information, which can be extracted with standard photogrammetric techniques. In this study, aerial photographs taken by the National Geographic Institute of Belgium in 1947 and 1991 were used to determine the soil redistribution pattern between these years. This was done by overlaying the two digital elevation models and subtracting the corresponding Z coordinate values (heights). The results indicate that most severe surface lowering occurs on the top of the hillslope and on the hillslope convexities. Important deposition occurs on the lowermost parts of the hillslope, in most hillslope concavities and in the topographically defined concentration line. The observed pattern differs markedly from that expected from water erosion processes, and suggests that the soil redistribution is dominated by tillage operations.  相似文献   

10.
Photogrammetric monitoring of small streams under a riparian forest canopy   总被引：2，自引：0，他引：2  
The recent advent of digital photogrammetry has enabled the modeling and monitoring of river beds at relatively high spatial resolution (0·01 to 1 m) through the extraction of digital elevation models (DEMs). The traditional approach to image capture has been to mount a metric camera to an aircraft, although non‐metric cameras have been mounted to a variety of novel aerial platforms to acquire river‐based imagery (e.g. helicopters, radio‐controlled motorized vehicles, tethered blimps and balloons). However, most of these techniques are designed to acquire imagery at flying heights above the riparian tree canopy. In relatively narrow channels (e.g. <20 m bankfull width), streamside trees can obscure the channel and limit continuous photogrammetric data acquisition of both the channel bed and banks, while still providing useful information regarding the riparian canopy and even spot elevations of the channel. This paper presents a technique for the capture and analysis of close‐range photogrammetric data acquired from a vertically mounted non‐metric camera suspended 10 m above the channel bed by a unipod. The camera is positioned under the riparian forest canopy so that the channel bed can be imaged without obstruction. The system is portable and permits relatively rapid image acquisition over rough terrain and in dense forest. The platform was used to generate DEMs with a nominal ground resolution of 0·03 m. DEMs generated from this platform required post‐possessing to either adjust or eliminate erroneous cells introduced by the extraction process, overhanging branches, and by the effects of refraction at the air–water interface for submerged portions of the channel bed. The vertical precision in the post‐processed surface generally ranged from ± 0·01 to 0·1 m depending on the quality of triangulation and the characteristics of the surface being imaged. Copyright © 2010 John Wiley & Sons, Ltd.  相似文献   

11.
Vegetation is an important factor influencing solifluction processes, while at the same time, solifluction processes and landforms influence species composition, fine‐scale distribution and corresponding ecosystem functioning. However, how feedbacks between plants and solifluction processes influence the development of turf‐banked solifluction lobes (TBLs) and their geomorphic and vegetation patterns is still poorly understood. We addressed this knowledge gap in a detailed biogeomorphic investigation in the Turtmann glacier foreland (Switzerland). Methods employed include geomorphic and vegetation mapping, terrain assessment with unmanned aerial vehicle (UAV) and temperature logging. Results were subsequently integrated with knowledge from previous geomorphic and ecologic studies into a conceptual model. Our results show that geomorphic and vegetation patterns at TBLs are closely linked through the lobe elements tread, risers and ridge. A conceptual four‐stage biogeomorphic model of TBL development with ecosystem engineering by the dwarf shrub Dryas octopetala as the dominant process can explain these interlinked patterns. Based on this model, we demonstrate that TBLs are biogeomorphic structures and follow a cyclic development, during which the role of their components for engineer and non‐engineer species changes. Our study presents the first biogeomorphic model of TBL development and highlights the applicability and necessity of biogeomorphic approaches and research in periglacial environments. Copyright © 2016 John Wiley & Sons, Ltd.  相似文献   

12.
For an erosion event (October 2016) occurred at the Sparacia experimental area (Southern Italy), both terrestrial and low‐altitude aerial surveys were carried out by consumer grade camera and quadcopter (low‐cost unmanned aerial vehicle [UAV]) to measure rill erosion on two plots with steepness of 22% and 26%. Applying the structure from motion (SfM) technique, the three‐dimensional digital terrain models (3D‐DTMs) and the quasi three‐dimensional models (2.5D‐digital elevation model [DEM]) were obtained by the two surveys. Furthermore, 3D‐DTM and DEM were built using the available aerial photographs (166) and adding 40 terrestrial photographs. For the first time, the convergence index was applied to high‐resolution rill data for extracting the rill network, and a subsequent separation into contributing and non‐contributing rills was carried out. The comparison among the three surveys (terrestrial, UAV, and UAV + terrestrial) was developed using two morphometric parameters of the rill network (drainage density and drainage frequency). Moreover, using as reference the weight of sediment stored on the tanks located downstream of the plots, the reliability of soil loss measurement by 3D models was tested. For both contributing and non‐contributing rills, the morphometric parameters were higher for the terrestrial than for UAV and UAV + terrestrial surveys. For both plots, SfM always provided reliable soil loss measurements, which were affected by errors ranging from ?8% to 13%. Although the applied technique used a low‐cost UAV and a consumer grade camera, the obtained results demonstrated that a reliable estimate of rill erosion can be obtained in an area of interest.  相似文献   

13.
We quantified how rates of stream channel migration in a montane meadow vary as a function of the riparian vegetation community. The South Fork of the Kern River at Monache Meadow, located in California's southern Sierra Nevada range, supports two distinct types of vegetation: a dry meadow community dominated by sagebrush and non‐native grasses (xeric scrub and meadow), and a wet meadow community dominated by rushes and sedges (hydric graminoids). We measured rates of lateral stream migration for dry versus wet meadow reaches from aerial photographs spanning a 40‐year period (1955–1995). While stream migration rates averaged only 0·24 ± 0·02 m a?1 in the wet meadow, the dry meadow channel migrated an average of 1·4 ± 0·3 m a?1. We used a linear model of meander migration to calculate coefficients that characterize bank migration potential, or bank erodibility, independent of channel curvature. These calculations demonstrate that, at Monache Meadow, banks without wet meadow vegetation are roughly ten times more susceptible to erosion than banks with wet meadow vegetation. Where stream bank heights consistently exceed 1 m, low water availability creates riparian habitats dominated by dry meadow vegetation. Thus, channel incision may reduce bank stability not only by increasing bank height, but also by converting banks from wet meadow to dry meadow vegetation. Copyright © 2002 John Wiley & Sons, Ltd.  相似文献   

14.
Proglacial slopes provide suitable conditions for observing the co-development of abiotic and biotic systems. The frequency and magnitude of geomorphic processes and plant composition govern this interplay, which is described in the model of biogeomorphic succession. In high mountain environments, this model has only been tested in a limited number of studies. The study aimed to quantify small-scale sediment transport via erosion plots along a plant cover gradient and to investigate the influence of sediment transport on plant communities. We aimed to generate quantitative data to test existing biogeomorphic models. Small-scale biogeomorphic interactions were investigated on 30 test plots of 2 × 3 m size on proglacial slopes of the Gepatschferner (Kaunertal) in the Austrian Alps during the snow-free summer months over three consecutive years. The experimental plots were established on slopes along a plant cover gradient. A detailed vegetation survey was carried out to capture biotic conditions, and specific sediment yield was measured at each plot. Species abundance and composition at each site reflected successional stages. Additional environmental parameters, such as terrain age, geomorphometry, grain size distribution, soil nutrients, and precipitation, were also included in the analyses. We observed two pronounced declines in geomorphic activity on plots with both above 30% and above 75% plant cover. Nonmetric multidimensional scaling showed distinct clusters of vegetation composition that mainly followed a successional gradient. Sites that were affected by high-magnitude geomorphic events showed different environmental conditions and species communities. Quantified process rates and observed species composition support the concept of biogeomorphic succession. The findings help to narrow down a biogeomorphic feedback window.  相似文献   

15.
Biogeomorphic ecosystems (e.g. rivers, salt marshes, mangroves and coastal dunes) are shaped by feedbacks between geomorphology and engineer plants that occur at various spatiotemporal scales. The classical bivariate and multivariate statistical methods currently used in biogeomorphology do not permit clear identification of reciprocal causality between geomorphic and biological variables. The aim of this article is to present the potential of the cross-lagged panel model (CLPM) to estimate reciprocal associations (causality) between one geomorphic and one biological variable over time. This tool, which originates from behavioural, social, medical and educational sciences, has clear potential as a novel approach to causal analysis in the context of biogeomorphic ecosystems. We provide a case study of the application of CLPM for analysing biogeomorphic feedbacks between topography and Populus nigra L. physiognomy on a wooded point bar of the Garonne River, France. © 2018 John Wiley & Sons, Ltd.  相似文献   

16.
Feedback between hydrogeomorphological processes and riparian plants drives landscape dynamics and vegetation succession in river corridors. We describe the consequences of biogeomorphological feedback on the formation and dynamics of vegetated fluvial landforms based on observations from the channelized Isère River in France. The channel was laterally confined with embankments and mostly straightened. From the beginning of the 1970s to the end of the 1990s, alternate bars were progressively but heavily colonized by vegetation. This context presented an exceptional opportunity to analyse temporal adjustments between fluvial landforms and vegetation succession from bare gravel bars to mature upland forest as the consequence of biogeomorphological interactions. Based on a GIS analysis of aerial photographs (between 1948 and 1996), we show that the spatiotemporal organization of vegetated bars within the river channel observed in 1996 resulted from a bioconstruction and biostabilization effect of vegetation and interactions between bars of varying age, size and mobility. Field measurements in 1996 reflected how a strong positive feedback between sedimentary dynamics and riparian vegetation succession resulted in the construction of the vegetated bars. A highly significant statistical association of geomorphological and vegetation variables (RV of co-inertia analysis = 0.41, p < 0.001) explained 95% of the variability in just one axis, supporting the existence of very strong feedback between geomorphological changes (i.e. the transformation of small bare alternate bars to fluvial landforms covered by mature upland forest, and vegetation succession). Such dynamics reflect the fluvial biogeomorphological successions model, as described by the authors earlier. © 2020 John Wiley & Sons, Ltd.  相似文献   

17.
Formation and development of alternate bars in an engineered mountainous reach of the Arc River, France, is studied using photo analysis, 1D modelling and by applying theoretical and empirical models for alternate bar systems. Alternate bars already existed in the 80s in the form of a stable confined wandering system. In 1994, the river bed was flattened after engineering works. However, aerial photographs and cross-sectional profiles show that bars rapidly recovered within a few years. The alternate bar system evolved rapidly with a reduction of the number of bars and so an increasing bar length. The width-to-depth ratio, the slope change, the bend upstream of the reach, and the sediment supplies are the main controls of bar formation and evolution. The system appears to lead to force bars due to the bend but also due to a bridge in the downstream part of the reach. Nevertheless some free mobile bars are still observed in the middle of the reach. A discussion on the alternate bar formation is provided using empirical and analytical models. Finally, impacts of low flows and vegetation seem to be significant in the stabilization of the system toward a confined wandering system as observed before the engineering works.  相似文献   

18.
Digital terrain models (DTMs) are a standard data source for a variety of applications. DTM differencing is also widely used for detection and quantification of topographic changes. While several investigations have been made on the accuracy of DTMs, calculated from different kinds of input data, little has been published on the error of DTM differencing, specifically for the quantification of geomorphological processes. In this study, an extensive, multi‐temporal set of airborne laser scanning (ALS) data is used to investigate the accuracy of topographic change calculations in a high alpine environment, caused by different geomorphic processes. Differences from DTMs with cell sizes ranging from 0.25 m to 10 m were calculated and compared to very accurate point‐to‐point calculations for a variety of processes and in nearby stable areas which show no significant surface changes. The representativeness of the DTM differences is then compared to the terrain slope and surface roughness of the investigated areas to show the influence of these parameters on the errors in the differences. Those errors are then taken into account for analyses of the applicability of different cell sizes for the investigation of geomorphic processes with different magnitudes and over different time periods. The analyses show that the error of DTM differences increases with lower point densities and higher roughness and slope values. The higher the error, the greater the differences between two elevation datasets have to be in order to quantify certain morphodynamic processes. Lower point densities and higher roughness and slope values require greater process rates or longer time intervals in order to obtain valid results. Copyright © 2013 John Wiley & Sons, Ltd.  相似文献   

19.
Stream bathymetry is a critical variable in a number of river science applications. In larger rivers, bathymetry can be measured with instruments such as sonar (single or multi‐beam), bathymetric airborne LiDAR (light detection and ranging), or acoustic Doppler current profilers. However, in smaller streams with depths less than 2 m, bathymetry is one of the more difficult variables to map at high‐resolution. Optical remote sensing techniques offer several potential solutions for collecting high‐resolution bathymetry. In this research, I focus on direct photogrammetric measurements of bathymetry using multi‐view stereo photogrammetry, specifically Structure‐from‐Motion (SfM). The main barrier to accurate bathymetric mapping with any photogrammetric technique is correcting for the refraction of light as it passes between the two different media (air and water), which causes water depths to appear shallower than they are. I propose and test an iterative approach that calculates a series of refraction correction equations for every point/camera combination in a SfM point cloud. This new method is meant to address shortcomings of other correction techniques and works within the current preferred method for SfM data collection, oblique and highly convergent photographs. The multi‐camera refraction correction presented here produces bathymetric datasets with accuracies of ~0.02% of the flying height and precisions of ~0.1% of the flying height. This methodology, like many fluvial remote sensing methods, will only work under ideal conditions (e.g. clear water), but it provides an additional tool for collecting high‐resolution bathymetric datasets for a variety of river, coastal, and estuary systems. Copyright © 2016 John Wiley & Sons, Ltd.  相似文献   

20.
A fundamental question in arid land management centers on understanding the long‐term effects of fire on desert ecosystems. To assess the effects of fire on surface topography, soil roughness, and vegetation, we used terrestrial (ground‐based) LiDAR to quantify the differences between burned and unburned surfaces by creating a series of high‐resolution vegetation structure and bare‐earth surface models for six sample plots in the Grand Canyon‐Parashant National Monument, Arizona. We find that 11 years following prescribed burns, mound volumes, plant heights, and soil‐surface roughness were significantly lower on burned relative to unburned plots. Results also suggest a linkage between vegetation and soil mounds, either through accretion or erosion mechanisms such as wind and/or water erosion. The biogeomorphic implications of fire‐induced changes are significant. Reduced plant cover and altered soil surfaces from fire likely influence seed residence times, inhibit seed germination and plant establishment, and affect other ecohydrological processes. Published in 2012. This article is a US Government work and is in the public domain in the USA.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号