共查询到20条相似文献，搜索用时 963 毫秒
1.
The Karakoram Shear Zone is a northwest-southeast trending dextral ductile shear zone, which has affected the granitic and
granodioritic bodies of the southern Asian Plate margin in three distinct episodes. The ductile shearing of the granitic bodies
at Tangste and Darbuk has resulted in the development of mylonites with mylonitic foliation and stretching lineation. More
intense deformation is noted in the Tangste granite grading up to orthomylonite, as compared to the Darbuk granite. Kinematic
indicators include S-C foliation, synthetic C′ and C″ antithetic shear bands, Type A s-mantled porphyroclasts, oblique quartz
foliation, micro-shears with bookshelf gliding, mineral fishes including Group 2 mica fishes, and Type 1 and 2a pull-apart
microstructures, and exhibit strong dextral sense of ductile shearing towards southeast. The textural features of the minerals,
especially that of quartz and feldspar, indicate temperature of mylonitisation ranging between 300 and 500°C in the upper
greenschist facies, and appear to have been evolved during exhumation as a consequence of oblique strike-slip movements along
the Karakoram shear zone. 相似文献
2.
B.K. Bhadra 《Gondwana Research》2000,3(3)
In the eastern part of southern Peninsular India, the charnockitic hills of the Madras block are cut across by the E-W trending Attur shear zone (ASZ) which is characterised by a thick (1 to 1.5 km) phyllonite zone, showing intense mylonitisation due to ductile shearing. Steeply plunging (70°–80°) stretching lineation on steeply dipping mylonitic foliation within this zone indicates a relative vertical upliftment of the adjacent blocks. A dextral shearing event from west to east is envisaged from the kinematic analysis of shear sense indicators such as S-C fabric, asymmetric folds, asymmetric augens and asymmetric porphyroclasts. Simultaneous development of these features, related to vertical and horizontal movements may be explained by the mechanism of transpressional deformation. The Attur shear zone may be correlated with the Moyar shear zone based on distinct lithological and structural similarities. 相似文献
3.
在大别造山带东端和苏鲁造山带西端,郯庐断裂带存在着同造山期和早白垩世两期左旋走滑韧性剪切带,在张八岭隆起南段迄今为止只发现了早白垩世的走滑剪切带。这些剪切带由若干条小型韧性剪切带组成,带内糜棱岩都具有陡倾的糜棱面理和平缓的矿物拉伸线理。野外构造、显微构造及石英C轴组构皆指示了左旋走滑剪切指向。新生矿物组合和矿物变形行为分析显示大别山东端郯庐早、晚两期剪切带主要形成于中绿片岩相的变质温度环境,张八岭隆起南段剪切带主要形成于高绿片岩相的变质温度环境,苏鲁造山带西端郯庐早、晚两期剪切带则形成于高角闪岩相的变质温度环境。糜棱岩内基质中新生白云母的电子探针分析指示大别山东端和张八岭隆起南段出露的郯庐韧性剪切带形成于低压环境下,而苏鲁造山带西端的郯庐韧性剪切带形成于高压榴辉岩相环境。这些详细的构造研究显示:在华北与华南板块的碰撞造山期郯庐断裂带以左旋走滑构造型式存在,而在早白垩世太平洋构造域中它又再次发生了强烈的左行平移。 相似文献
4.
M.C. Frisicale F.J. Martinez L.V. Dimieri J.A. Dristas 《Journal of South American Earth Sciences》2005,19(4):433-444
A microstructural analysis was carried out on mylonitic rocks of the Azul megashear zone (AMSZ), Tandilia, which were formed in a range of metamorphic conditions from lower greenschist to amphibolite facies. Tailed porphyroclasts are common and mostly symmetric. Scarce asymmetric rotated porphyroclasts show both sinistral and dextral senses of shear. In sections parallel to the mylonitic foliation, porphyroclasts are round. The AMSZ is probably related to the late Transamazonian orogenic cycle and may be due to NNE–SSW-directed convergence. In weakly deformed protolith and protomylonites, quartz deforms by dynamic recrystallization, mainly subgrain rotation in dislocation creep Regime 2. K-feldspar porphyroclasts and plagioclase show scarce fracturation and deform by dynamic recrystallization along grain boundaries. Quartz microstructures in mylonites indicate predominantly Regime 3 grain boundary migration recrystallization. Feldspar structures indicate recrystallization through the nucleation and growth of new grains at grain boundaries. The temperatures of deformation from mineral assemblages in the CNKFMASH system in four bulk compositions are in the range of 400–450 °C, and the pressures are more than 6 kb. 相似文献
5.
A Large Ductile Sinistral Strike-Slip Shear Zone and Its Movement Timing in the South Qilian Mountains, Western China 总被引：6，自引：1，他引：5
XU Zhiqin LI Haibing CHEN Wen WU Cailai YANG Jingsui JIN Xiaochi CHEN Fangyuan Institute of Geology Chinese Academy of Geological Sciences Beijing Xie Guanglian 《《地质学报》英文版》2002,76(2):183-193
There is a large ductile shear zone, 2 km wide and more than 3SO km long, in the South Qilian Mountains, western China. It is composed of volcanic, granitic and calcareous mylonites. The microstructures of the ductile shear zone show nearly E-W extending subvertical foliation, horizontal and oblique stretching lineations, shearing sense from sinis-tral to oblique sinistral strike-slip from east to west, "A" type folds and abundant granitic veins. Measured lattice preferred orientations (LPOs) of the mylonitic and recrystallized quartz of the granitic mylonite in the west segment suggest a strong LPO characterized by the dominant slip systems {1010} formed at high temperature (>650℃). K-feldspar of the mylonite shows an 39Ar/40Ar high-temperature plateau age of 243.3±1.3 Ma, and biotite, 250.5±0.5 Ma, which represent the formation age of the ductile shear zone. The 39Ar/40Ar plateau ages of 169.7±0.3 Ma and 160.6±0.1 Ma and the 39Ar/40Ar isochron ages of 166.99±2.37 Ma and 160.6±0.1 Ma of biot 相似文献
6.
Veysel Isik 《Journal of Asian Earth Sciences》2009,34(4):507-521
The Emizözü shear zone is the west–northwest-trending ductile shear zone within the A?açören granitoid in central Turkey. Deformation that affected the granitoid along the Emizözü shear zone resulted in mylonites with mylonitic foliation and stretching lineation. The textural features of the deformed minerals suggest that mylonitization occurred under conditions of upper greenschist facies. The shear indicators, including asymmetric porphyroclasts, oblique foliation, and shear bands, suggest a down-dip (top-to-the-southwest) displacement. The orientation of stretching lineation, as well as kinematic indicators, indicates the extensional character of the Emizözü shear zone. Although it is not precisely dated, the available age constraints suggest that the zone formed at 78–71 Ma. According to field and micro-structural data, the A?açören granitoid was most likely emplaced during a regional deformation in central Turkey, and synchronously or shortly after was overprinted by the extensional Emizözü shear zone. The zone can also be correlated with the earlier stage development of the Tuzgölü basin in central Turkey. 相似文献
7.
辽西兴城—台里地区发育系列花岗质岩石,强烈构造变形特征均显示其具有韧性剪切带的特点。对剪切带北段进行详细宏微观构造解析,结合岩石变形强度差异性分析、有限应变测量、石英C轴EBSD测试以及古差异应力值估算等研究,结果表明剪切带内花岗质片麻岩和眼球状花岗质片麻岩具有NEE向左行剪切变形特征,变形岩石为S-L构造岩,应变类型属于平面应变,古差异应力值介于30~40 MPa之间。长石-石英矿物温度计以及石英C轴EBSD组构指示剪切带以中低温变形为主,温度在400℃~500℃,属绿片岩相变质,具中-低温韧性剪切带特征。韧性剪切带内普遍存在变形分解现象,弱变形带内岩石残斑含量较高,眼球状构造和S-C组构较为发育;强变形带岩石残斑含量较低,剪切面理较为发育,糜棱面理发育较弱或者不发育。 相似文献
8.
康古尔韧性剪切带变形特征及控矿作用 总被引：2，自引：0，他引：2
康古尔韧性剪切带具明显的遥感影像特征和区域重、磁异常变化特征。韧性剪切引起的变质作用表现为强应力下的岩石变质、变形，变质相序从绿片岩相到角闪岩相，变质岩石类型为千枚岩、片岩、变粒岩、糜棱岩及糜校岩化的岩石。韧性剪切变形和塑性流动形成的面理、线理、招皱、韧性断裂等构造形迹十分明显，构成一条东百长1000多千米，南北宽20～30km的狭长线形构造带（强应变带）；它经历了多期次、多种构造作用交替叠加的变化过程，按性质分类属大型平移断裂系统。康古尔韧性剪切带控制着重要的金矿、铜镍矿床及稀有金属等矿产，是新疆东部有重要找矿意义的成矿带。 相似文献
9.
Palaeozoic late collisional strike-slip deformations in Tianshan and Altay, Eastern Xinjiang, NW China 总被引：12，自引：0，他引：12
ABSTRACT In Central Asia, thrusts and shear zones resulting from Palaeozoic accretional events were reworked by E–W-trending ductile strike-slip faults during late Palaeozoic–early Mesozoic time. In the Tianshan range, microstructures and quartz C-axis fabrics show a main dextral shearing associated with sinistral localized shear zones. The relationship between these conjugate structures indicates a NNW–SSE-trending bulk shortening. In the Chinese Altay mountains, the existence of δ-type microstructures in an important sinistral mylonitic zone infers high rates of deformation. This shear zone is bordered by a late dextral ductile fault synchronous with a granite emplacement. Field evidence and datings from the literature provide chronological constraints. In the late Carboniferous, the sinistral mylonitic deformation took place in the Erqishi–Irtysh shear zone in the northeastern part of Xinjiang and in Kazakhstan. During the Early Permian, a regional dextral event occurred in the Tianshan range and under the whole of northern Xinjiang. 相似文献
10.
By means of petrogrological, meso- and microstructural analyses, the fabric of a syn-tectonic late Hercynian K-feldspar megacryst-bearing granodiorite is described in this paper. The granodiorite was emplaced at 293 Ma within migmatitic paragneisses which had reached the regional peak metamorphic conditions at 304–300 Ma. The granodiorite and the migmatitic paragneisses are both affected by the same ductile shear zone. In the core of the shear zone, mylonites show a clear grain-size reduction and microstructures related to deformation at high to medium temperature conditions. Migmatitic paragneisses, foliated granodiorites and mylonites mostly show concordant lineation and foliation orientations. In addition, the preferred orientation of euhedral feldspars in granodiorites indicates that the fabric anisotropy started to develop in the magmatic state. These features strongly suggest that shear deformation was active during crystallisation of granitoids and continued under subsolidus conditions. In wall rocks and mylonites, kinematic indicators such as - and -type porphyroclasts, S/C fabrics, shear bands and quartz (c) axis orientations suggest a top-to-the-W sense of shear. This is similar to the magma flow direction indicated by the tiling of euhedral feldspar megacrysts in granodiorites. Shear deformation developed, preferentially, by partitioning of strain in the granodioritic crystal mush. Geobarometry indicates that deformation took place at middle crustal levels (P=400–500 MPa). Whole rock-white mica Rb/Sr geochronological analysis of an undeformed pegmatite, crosscutting the mylonitic foliation, provided an age of 265 Ma. Timing of deformation is therefore bracketed between 293 Ma and 265 Ma. 相似文献
11.
白云鄂博矿区北部韧性剪切带特征及其构造意义 总被引：1，自引：0，他引：1
在白云鄂博主矿北西约6.5km处的查干楚鲁一带,有一条近东西向延伸的断层带,前人在该带中部识别出了蛇绿岩混杂堆积。本文作者在蛇绿岩东部的大理岩质糜棱岩中发现鞘褶皱、拉伸线理及旋转碎斑系等变形构造,在大理岩周围发现石英岩型宏观压力影构造,在变质石英砂岩中识别出褶劈理以及方解石脉等相关构造,在这条东西向断裂带北边发现典型的黄铁矿型压力影。根据上述特征判断,查干楚鲁一带为一条近东西向延伸的韧性剪切带,同时具有NEE—SWW向逆左旋走滑的特征。该带揭示出蒙古洋板块与华北板块在晚古生代汇聚拼合的基本格局。 相似文献
12.
The Yunmeng Shan metamorphic core complex (MCC) is composed of the lower plate, the upper plate and the detachment zone. The detachment zone consists of ductile shear zone (mylonite zone), chloritized microbreccias zone and the brittle fault plane. The ductile shear zone contains mylonitic rocks, protomylonites, and mylonites. Finite strain measurements of feldspar porphyroclasts from those rocks using the Rf/φ method show that the strain intensities increase from mylonitic rocks (Es=0.66–0.72) to protomylonites (Es=0.66–0.83), and to mylonites (Es=0.71–1.2). The strain type is close to flatten strain. Kinematic vorticity estimated by Polar Mohr diagrams suggest that foliations and lineation of mylonite (0.47相似文献
13.
内蒙赤峰地区若干主干断裂带的构造热年代学 总被引：17，自引：7，他引：17
黑里河-宋三家和西拉木仑近东西向断裂的宏观和显微组构特征均指示了右行走滑剪切；小城子-八里罕北北东向断裂显示了平面上的左行剪切和剖面上的正断式剪切。根据断裂糜棱岩中长石残斑与韧性基质在粒径上的显著差异，采用逐级破碎、逐级分选的方法，逐次剔除长石残斑。从细粒韧性基质中分选出钾长石、斜长石和黑云母，进行糜棱岩矿物内部Rb—Sr等时线定年和单颗粒黑云母的激光熔化^40Ar／^39Ar定年。定年结果显示，糜棱岩化促进了手标本尺度上的同位素均一化，造成了原岩同位素时钟的重置。定年结果表明，黑里河-宋三家断裂变形的年龄为232Ma；西拉木仑断裂右行挤压走滑的年龄为165Ma。蒙古古生代岩浆弧与华北地块北缘的碰撞拼贴，以及华北-蒙古联合地块与西伯利亚板块的碰撞拼贴的远程效应。导致了上述2期变形。小城子-八里罕断裂的左行和正断式剪切的年龄介于127～117Ma，与喀喇沁核杂岩的快速隆升时期相同。壳-幔隆升促进了中下地壳的韧性化和拆离，导致了北北东向断裂的左行和正断式剪切。 相似文献
14.
The Wadi Fatira area occurs at the southern margin of the Northern Eastern Desert (NED) of Egypt and is occupied by highly sheared metavolcanics tectonically alternated with banded iron formations and intruded by Barud tonalite–granodiorite, post-tectonic gabbroic and granitic intrusions. Detailed structural investigation showed that the schists and migmatitic amphibolites are formed by shearing in metavolcanics and syntectonic Barud tonalite–granodiorite due to movement along the Wadi Fatira shear zone (WFSZ). This shear zone starts as a NW–SE striking fault along Wadi Barud Al Azraq and the Eastern part of Wadi Fatira and turns to a E–W trending fault to the north of Wadi Fatira. Microstructural shear sense indicators such as asymmetric geometry of porphyroclasts such as σ-type and asymmetric folds deforming fine-grained bands which are frequently found around porphyroclasts indicate sinistral sense of shearing along the WFSZ. This shear zone is characterized by transitions from local convergence to local extension along their E–W and NW–SE trending parts, respectively. The NW–SE part of the WFSZ is of about 200 m in width and characterized by synmagmatic extensional features such as intrusion of synkinematic tonalite, creation of NE–SE trending normal faults, and formation of migmatitic amphibolites and schlieric tonalites. This part of the shear zone is metamorphosed under synthermal peak metamorphic conditions (725°C at 2–4 kbar). The E–W compressional part of the WFSZ is up to 3 km in width and composed of hornblende, chlorite, actinolite, and biotite schists together with sheared intermediate and acidic metatuffs. Contractional and transpressional structures in this part of the WFSZ include E–W trending major asymmetrical anticline and syncline, nearly vertical foliation and steeply pitching stretching lineations, NNE dipping minor thrusts, and minor intrafolial folds with their hinges parallel to the stretching lineation. P–T estimates using mineral analyses of plagioclase and hornblende from schists and foliated metavolcanics indicate prograde metamorphism under medium-grade amphibolite facies (500–600°C at 3–7 kbar) retrogressed to low-grade greenschist facies (227–317°C). The foliation in Barud tonalite–granodiorite close to the E–W part of the WFSZ runs parallel to the plane of shearing and the tonalite show numerous magmatic flow structures overprinted by folding and ductile shearing. The WFSZ is similar to structures resulted from combined simple shear and orthogonal shortening of oblique transpressive shear zones and their sense of movement is comparable with the characteristics of the Najd Fault System. 相似文献
15.
Osama M. K. Kassem 《Arabian Journal of Geosciences》2012,5(1):159-167
New structural, metamorphic, finite strain, and kinematic vorticity data for mylonitic granitic rocks from northern thrust in Wadi Mubarak reveal a history of deformation reflecting different tectonic regimes. The vorticity analysis of porphyroclasts was determined in high temperature mylonites. The kinematic vorticity number for the mylonitic granitic samples in the northern thrust in Wadi Mubarak range from 0.66 to 0.90, and together with the strain data suggest deviations from simple shear. It is concluded that nappe stacking occurred early during the underthrusting event probably by brittle imbrication and that ductile strain was superimposed on the nappe structure during thrusting. The accumulation of ductile strain during thrusting was not by simple shear and involved a component of vertical shortening, which caused the subhorizontal foliation in the northern thrust in Wadi Mubarak and adjacent units. 相似文献
16.
SHU Liangshu CHARVET Jacques GUO Lingzhi LU Huafu LAURENT-CHARVET Sebastien 《《地质学报》英文版》1999,73(2):148-162
The nearly E-W-trending Aqqikkudug-Weiya zone, more than 1000 km long and about 30 km wide, is an important segment in the Central Asian tectonic framework. It is distributed along the northern margin of the Central Tianshan belt in Xinjiang, NW China and is composed of mylonitized Early Palaeozoic greywacke, volcanic rocks, ophiolitic blocks as a mélange complex, HP/LT-type bleuschist blocks and mylonitized Neoproterozoic schist, gneiss and orthogneiss. Nearly vertical mylonitic foliation and sub-horizontal stretching lineation define its strike-slip feature; various kinematic indicators, such as asymmetric folds, non-coaxial asymmetric macro- to micro-structures and C-axis fabrics of quartz grains of mylonites, suggest that it is a dextral strike-slip ductile shear zone oriented in a nearly E-W direction characterized by "flower" strusture with thrusting or extruding across the zone toward the two sides and upright folds with gently plunging hinges. The Aqqikkudug-Weiya zone experienced at least two stages of ductile shear tectonic evolution: Early Palaeozoic north vergent thrusting ductile shear and Late Carboniferous-Early Permian strike-slip deformation. The strike-slip ductile shear likely took place during Late Palaeozoic time, dated at 269(5 Ma by the40Ar/39Ar analysis on neo-muscovites. The strike-slip deformation was followed by the Hercynian violent S-type granitic magmatism. Geodynamical analysis suggests that the large-scale dextral strike-slip ductile shearing is likely the result of intracontinental adjustment deformation after the collision of the Siberian continental plate towards the northern margin of the Tarim continental plate during the Late Carboniferous. The Himalayan tectonism locally deformed the zone, marked by final uplift, brittle layer-slip and step-type thrust faults, transcurrent faults and E-W-elongated Mesozoic-Cenozoic basins. 相似文献
17.
藏南曲水地区鸡公-色甫韧性剪切带系统的运动学和动力学研究,不仅对造山带构造研究具有重要理论意义,而且对青藏高原中-南部区域地质研究具有推进作用.作为藏南冈底斯岩浆带曲水岩基中的重要断裂构造,曲水韧性剪切带经历了新生代以来的大规模构造变形,其中走滑剪切作用最为显著,整体表现为右行走滑为主.通过对曲水剪切带中的构造片岩、初糜棱岩、糜棱岩以及长英质脉体等野外观测并结合室内镜下薄片以及石英EBSD(electron backscatter diffraction)组构分析,认为曲水剪切带主要经历了一期韧性变形事件.根据石英-长石变形矿物对并结合石英EBSD组构分析得出,构造变形发生的温度大约为500~550 ℃,高绿片岩相到角闪岩相.剪切带内普遍发育有不对称的褶皱、构造透镜体、σ碎斑、S-C组构和石香肠等变形组构,显示出右行走滑的特征.对研究区34组糜棱面理和9组拉伸线理进行极射赤平投影,糜棱面理的优选方位约为355°∠70°,拉伸线理产状约为95°∠8°.此外,在糜棱岩中发育两类长英质脉体,根据野外分布特征、显微组构、锆石成因学以及岩石地球化学特征综合研究认为,两类长英质脉体为同构造剪切脉体,其年代学可以对剪切带的形成时限起到很好的制约.通过对两套长英质脉体分别进行LA-ICP-MS锆石U-Pb定年,得到了38.67±0.88 Ma和35.05±0.29 Ma两组加权平均年龄,表明了曲水剪切带韧性变形发生于35~38 Ma的始新世末期(普利亚本期).这一年龄值处于印度-亚洲大陆晚碰撞期,因此曲水韧性剪切带右行走滑事件可能是印度板块持续向北俯冲,构造应力在欧亚板块边缘释放引起的陆内构造响应. 相似文献
18.
《Journal of Structural Geology》1987,9(3):289-297
Mylonites derived largely from granite, pegmatite and sedimentary quartzite occupy a 500 m thick, gently N-dipping zone along the northern flank of the Coyote Mountains, west of Tucson, in southeastern Arizona. The quartzite mylonites are exceptionally well developed and occur as discrete layers and lenses, 2–5 m thick, within yet thicker, boudinaged, sill-like lenses of mylonitic pegmatite. Mylonitization took place in the Tertiary within a normal-slip ductile shear zone. The shear zones formed in response to regional extension of continental crust. Extension is along a north-south line, and N-directed sense of shear is revealed by mica fish, oblique foliations in dynamically recrystallized quartz aggregates, and asymmetric quartz c-axis fabrics. The microstructures and c-axis fabrics, taken together, disclose that ductile and brittle deformation was achieved by intense, penetrative, non-coaxial laminar flow dominated by progressive simple shear. 相似文献
19.
20.
郯庐剪切带的性质和意义 总被引：11，自引：0，他引：11
沿郯庐断裂带从大别山东麓经山东中部至辽北吉南的新宾—桦甸地区,暴露的早前寒武纪结晶岩石中存在着一系列北北东走向的大型韧性剪切带,其最大宽度达20km,走向断续延伸近2000km,它们分别在大别、鲁西和新宾地区形成了巨大的弧形牵引构造。剪切带中不同尺度组构要素的几何学,指示其中曾经发生了一致的大幅度左行位移;变形岩石的显微构造和矿物组合特征,说明这一韧性剪切带早期形成于低角闪岩相条件下,并且在抬升和冷却过程中经历了绿片岩相条件下的递进变形。山东中部晚元古代以后的沉积不整合于韧性剪切带及其变形岩石之上,中生代未期脆性的郯庐断裂系统追踪并改造了基底岩石中的韧性剪切带。 相似文献