共查询到15条相似文献，搜索用时 187 毫秒
1.
针对构件外表面局部区域遭受随机点蚀损伤的圆管截面,考虑点蚀随机特性的影响,建立包含点蚀坑细节的精细有限元模型;在多种腐蚀强度下,研究局部腐蚀的点蚀区分布位置(沿轴向和周向分布位置变化)及其形状(点蚀区长度和宽度独立或联合变化)影响轴压极限强度退化的规律;并比较局部随机点蚀与局部均匀腐蚀引起构件极限强度退化的差异。研究结果表明,尽管局部随机点蚀与最大初始几何缺陷的耦合作用会使极限强度的退化趋于严重,但是总体而言点蚀区分布位置变化对圆管极限强度的退化没有显著的影响。此外,同等腐蚀体积和腐蚀面积下,相比于长窄式局部腐蚀,短宽式局部腐蚀会引起更严重的极限强度退化,在严重腐蚀情形下后者导致的强度退化会高出25.5%;相比于局部均匀腐蚀,局部随机点蚀会导致更剧烈的极限强度退化,其不利影响可高出20.7%。 相似文献
2.
船舶与海洋结构在服役期间会遭受电化学和微生物侵蚀等多种腐蚀环境影响,加筋板作为此类结构的主要受力构件,其表面易产生不规则形态的点蚀,引起构件的强度退化。利用ANSYS有限元软件构建加筋腹板遭受随机点蚀损伤的加筋板有限元模型,研究带板长宽比、带板长细比、加筋长细比和腐蚀体积损失率对加筋板极限强度的影响。研究结果表明,加筋遭受同等腐蚀体积损失率下,带板长宽比变化对极限强度退化的影响很小,但带板长细比和加筋长细比变化产生的影响明显;带板长细比越大,极限强度退化越严重,而加筋长细比越大,极限强度退化反而越小。针对文中研究的加筋板,当加筋长细比为 0.2时,腐蚀体积率为14%的随机点蚀导致结构极限强度退化程度达到约14.0%。因此,加筋的随机点蚀损伤会显著削弱加筋板结构的极限强度,其影响不可忽略。 相似文献
3.
点蚀损伤下桩基式平台腿柱轴压极限承载力研究 总被引：2，自引：0，他引：2
采用圆柱体点蚀损伤模型,建立含细观尺度点蚀损伤的桩基式平台腿柱多尺度精细化数值模型,研究壁厚损伤度、点蚀损伤强度以及点蚀体积损伤强度影响平台腿柱轴压极限承载力的规律。研究结果表明,壁厚损伤度及点蚀损伤强度明显削弱平台腿柱的极限强度,且随点蚀损伤强度增大壁厚损伤度的影响加剧;点蚀体积损伤强度由于综合考虑了壁厚损伤度和点蚀损伤强度的耦合因素,相比于独立考虑后两者,其更能合理地描述点蚀损伤对平台腿柱极限强度的影响,故点蚀体积损伤强度体现了点蚀损伤的关键特征。本方法不仅适用于研究点蚀损伤构件的极限承载力,其所提出的点蚀损伤模型的构建方法,可拓展于研究受点蚀损伤的整体平台结构的极限承载力,且确定点蚀体积损伤强度为描述点蚀损伤特征的关键参数后,有望将其用于修正点蚀损伤平台腿柱的承载力设计公式。 相似文献
4.
基于EIFS和P-M的海底管道腐蚀疲劳寿命预测 总被引：1，自引：1，他引：0
鉴于腐蚀疲劳损伤的特殊性,研究了点蚀过程和腐蚀疲劳裂纹扩展过程。基于等效初始缺陷尺寸(EIFS)和线性累积损伤理论(P-M)方法,消除了点蚀形核、蚀坑生长及腐蚀疲劳短裂纹扩展对腐蚀疲劳寿命预测的影响;避免了基于单点蚀坑建立的腐蚀疲劳寿命预测表达式的弊端;合理地简化了随机荷载下腐蚀疲劳寿命的预测流程。利用现有试验数据,对基于EIFS和P-M方法建立的腐蚀疲劳寿命预测表达式进行了模型验证。结果显示,所提模型的有效性和合理性得到了验证,为工程实际中海底管道的腐蚀疲劳寿命预测提供了一种可行方法。 相似文献
5.
基于非线性有限元方法,计及材料非线性和几何非线性,考虑腐蚀损伤因素提出了一种固定式海洋平台极限强度计算方法,并以墨西哥湾某海域某典型固定式海洋平台为算例,对其进行全寿命期内极限强度计算,获得了该海洋平台极限强度随服役年限的变化规律。同时依据刚度相似和几何相似,设计完好试验模型和腐蚀试验模型,开展极限强度试验研究,将试验结果与计算结果对比分析,通过试验手段验证了腐蚀损伤下海洋平台极限强度计算方法的有效性。 相似文献
6.
主要探讨了半潜钻井平台浮体结构由于受到海洋环境腐蚀作用后的时变极限强度问题。首先,总结各种关于腐蚀损伤的平均厚度缩减模型,选择较能反映实际腐蚀过程的数学模型来估量浮体的钢板厚度缩减。在此基础上进行一系列极限强度计算,根据计算结果给出浮体极限强度预报公式。最后研究不同纵向构件板厚折减对极限强度的影响,发现浮体角隅板的单位体积影响率最高,而占结构比例大的构件厚度折减也将使得强度大大削弱,这两类纵向构件需要予以重点腐蚀保护。 相似文献
7.
根据电化学腐蚀原理,制备不同均匀腐蚀程度的海工高强度结构钢NVD36试件,对腐蚀试件进行了拉伸试验,得到了钢材拉伸性能的变化规律:随着腐蚀程度的增加,钢材NVD36的弹性模量、屈服强度、屈服应变、极限强度、峰值应变、断裂强度和断裂应变(极限应变)都在逐渐变小,屈服平台长度和强化应变没有明显的变化趋势,强屈比保持在一定范围内。当腐蚀质量相同,试件出现明显点蚀时,NVD36钢材的拉伸性能有所退化。通过拟合试验数据,建立了腐蚀后海洋结构钢应力-应变三折线模型,并对拉伸试验进行了数值模拟。 相似文献
8.
旨在了解箱型梁在极端循环载荷下的极限强度特性。利用非线性有限元方法来研究裂纹箱型梁的极限弯矩,分析了5种裂纹模型,探讨了裂纹类型、裂纹位置和裂纹长度的影响。考虑了两种载荷形式应用生死单元法对双向循环弯曲下裂纹扩展进行了模拟;并将由循环载荷引起的累积塑性损伤和疲劳裂纹损伤均考虑在内。无论单向循环还是双向循环,单裂纹模型的极限弯矩均小于双裂纹模型的极限弯矩;单边裂纹是最危险的裂纹类型。进一步分析了极端循环载荷下裂纹箱型梁的极限强度折减机理,得出了极限强度折减归因于这两种损伤的耦合作用的结论,并通过其他箱型梁验证了其适用性。 相似文献
9.
运行在恶劣环境中的海底管道,往往受到内压、轴力和弯矩等复杂荷载的联合作用。腐蚀会导致管壁局部变薄,降低管道极限承载力。为保证管道安全高效运行,准确预测和分析复杂荷载作用下的塑性极限承载力和变形行为就显得尤为重要。考虑大应变和大变形、应力强化和材料非线性,运用数值仿真软件建立腐蚀缺陷管道的三维实体有限元模型,在全尺寸管道破坏试验验证的基础上,对腐蚀管道在内压、轴向压力和弯矩相互作用下的失效模式和极限弯矩承载力进行了相关研究,并进行了腐蚀缺陷几何参数的敏感性分析。研究结果表明:初始内压和初始轴向压力会显著降低腐蚀管道的极限弯矩承载力,并且影响最终的失效模式;在腐蚀缺陷几何尺寸参数中,腐蚀宽度比腐蚀深度和腐蚀长度的影响更大。 相似文献
10.
本文采用基于不可逆热力学原理的韧性金属复杂应力损伤演化模型,对ABAQUS二次开发将损伤模型引入有限元计算,实施含腐蚀传动装置磨粒磨损分析;磨粒-传动轴-配合面耦合模型中,磨粒采用三维球形分形模型,对点蚀和面蚀配合面与磨粒微观接触时损伤演化及传动特性变化进行模拟,发现磨粒挤入配合面后应力三轴度增大,传动轴转动数周后接触面即出现凸峰与沟犁,而且缺陷间存在损伤连通趋势,使结构传动运动能力快速下降;考虑环境温度循环,温度升高使磨粒局部产生应力梯度,对结构传动能力也有不利影响。基于材料损伤演化模型建立细观磨粒磨损与宏观传动装置统一的模拟方法,实现了海洋环境下小间隙配合面磨粒磨损计算,有效预测了传动装置性能退化过程。 相似文献
11.
Artificial neural networks and their application to assessment of ultimate strength of plates with pitting corrosion 总被引：1，自引：0，他引：1
The potential for the structural capability degrading effects of both corrosion and fatigue induced cracks are of profound importance and must be both fully understood and reflected in vessel's inspection and maintenance programme. Corrosion has been studied and quantified by many researchers, however its effect on structural integrity is still subject to uncertainty, particularly with regards to localized corrosion. The present study is focused on assessing the effects of localized pitting corrosion on the ultimate strength of unstiffened plates. Over 265 non-linear finite-element analyses of panels with various locations and sizes of pitting corrosion have been carried out. The results indicate that the length, breadth and depth of pit corrosion have weakening effects on the ultimate strength of the plates while plate slenderness has only marginal effect on strength reduction. Transverse location of pit corrosion is also an important factor determining the amount of strength reduction. When corrosion spreads transversely on both edges, it has the most deteriorating effect on strength. In addition, artificial neural network (ANN) method is applied to derive a formula to predict ultimate strength reduction of locally corroded plates. It is found out that the proposed formulae can accurately predict the ultimate strength of locally corroded plates under uniaxial in-plane compression. 相似文献
12.
It is well known that pitting corrosion occurring on surface of hull structural plate will surely result in a significant degradation of the ultimate strength of the hull structural plate. This report aims at development of an assessing formula for ultimate strength of hull plate with pitting corrosion damage under the biaxial in-plane compression loading. The ultimate strength assessment model that is in terms of the corroded volume loss was deduced in theory, and which was then completed through numerical experiment by employing nonlinear finite element analyses for series of corroded plate models. Meanwhile, pitting corrosion in actual ship hull was analyzed and simulated, which ensured that all the assumptions for the finite element model parameters were in accord with the actual hull plate with pitting corrosion damage. Furthermore, the effects of plate slenderness, the linear factors at the plate edges and the ratio between the transverse and the longitudinal in-plane stresses on the ultimate strength reduction related to the corroded volume loss were discussed. The ultimate strength assessment formula being in terms of corroded volume loss developed in this research is expected to be applicable to assess the ultimate strength of the hull structural plate with pitting corrosion damage. 相似文献
13.
14.
15.
AbstractThe research on the influence of groundwater level fluctuation on pit properties is a new subject in actual engineering, and the research on pit-in-pit has not been deeply studied. In this article, the finite element (FE) model of pit-in-pit is established based on FE method, and DISP subroutine is programmed to realize the fluctuation of groundwater level over time. The deformation characteristics of exterior enclosure structure under the condition of with or without groundwater level fluctuation are compared considering effect of different inner pit’s excavation locations, depths, sizes, and insertion ratios. The results show that the maximum lateral displacement of the pit exterior enclosure structure is inversely related to the pit toe coefficient and the insertion ratio, and is positively related to the depth ratio and the area ratio, and there is a critical value for the pit toe coefficient. Considering the fluctuation of the groundwater level, the lateral displacement of the cantilever enclosure structure is larger than that without considering the groundwater level fluctuation. 相似文献