首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 46 毫秒
1.
The Northern Apennines have been subdivided into homogeneous zones, on the basis of recent structural evolution and crustal structure, in which the earthquake distribution can find a coherent framework. These zones, whose physiography is in strict connection with their structure, are: the Internal Peri-Tyrrhenian Belt; the External or Main Belt; the Buried Belt; and the Pede-Alpine Homocline. Earthquake activity has a tendency to cluster along well-defined bands, particularly in the easternmost border of the Peri-Tyrrhenian Belt, as well as along the zone between the External Belt and the Buried Belt, i.e. along the Padanian margin of the Northern Apennines.A minimum of seismic activity seems to be correlated with some zones of the External Belt, as well as with the Late Tertiary and Quaternary magmatic province of Tyrrhenian Southern Tuscany.The fault-plane solutions are coherent with the structural picture.A tentative seismotectonic model of the Northern Apennines is discussed.  相似文献   

2.
We present a revision and a seismotectonic interpretation of deep crust strike–slip earthquake sequences that occurred in 1990–1991 in the Southern Apennines (Potenza area). The revision is motivated by: i) the striking similarity to a seismic sequence that occurred in 2002  140 km NNW, in an analogous tectonic context (Molise area), suggesting a common seismotectonic environment of regional importance; ii) the close proximity of such deep strike–slip seismicity with shallow extensional seismicity (Apennine area); and iii) the lack of knowledge about the mechanical properties of the crust that might justify the observed crustal seismicity. A comparison between the revised 1990–1991 earthquakes and the 2002 earthquakes, as well as the integration of seismological data with a rheological analysis offer new constraints on the regional seismotectonic context of crustal seismicity in the Southern Apennines. The seismological revision consists of a relocation of the aftershock sequences based on newly constrained velocity models. New focal mechanisms of the aftershocks are computed and the active state of stress is constrained via the use of a stress inversion technique. The relationships among the observed seismicity, the crustal structure of the Southern Apennines, and the rheological layering are analysed along a crustal section crossing southern Italy, by computing geotherms and two-mechanism (brittle frictional vs. ductile plastic strength) rheological profiles. The 1990–1991 seismicity is concentrated in a well-defined depth range (mostly between 15 and 23 km depths). This depth range corresponds to the upper pat of the middle crust underlying the Apulian sedimentary cover, in the footwall of the easternmost Apennine thrust system. The 3D distribution of the aftershocks, the fault kinematics, and the stress inversion indicate the activation of a right-lateral strike–slip fault striking N100°E under a stress field characterized by a sub-horizontal N142°-trending σ1 and a sub-horizontal N232°-trending σ3, very similar to the known stress field of the Gargano seismic zone in the Apulian foreland. The apparent anomalous depths of the earthquakes (> 15 km) and the confinement within a relatively narrow depth range are explained by the crustal rheology, which consists of a strong brittle layer at mid crustal depths sandwiched between two plastic horizons. This articulated rheological stratification is typical of the central part of the Southern Apennine crust, where the Apulian crust is overthrusted by Apennine units. Both the Potenza 1990–1991 and the Molise 2002 seismic sequences can be interpreted to be due to crustal E–W fault zones within the Apulian crust inherited from previous tectonic phases and overthrusted by Apennine units during the Late Pliocene–Middle Pleistocene. The present strike–slip tectonic regime reactivated these fault zones and caused them to move with an uneven mechanical behaviour; brittle seismogenic faulting is confined to the strong brittle part of the middle crust. This strong brittle layer might also act as a stress guide able to laterally transmit the deviatoric stresses responsible for the strike–slip regime in the Apulian crust and may explain the close proximity (nearly overlapping) of the strike–slip and normal faulting regimes in the Southern Apennines. From a methodological point of view, it seems that rather simple two-mechanism rheological profiles, though affected by uncertainties, are still a useful tool for estimating the rheological properties and likely seismogenic behaviour of the crust.  相似文献   

3.
We relocate the 1990–1991 Potenza (Southern Apennines belt, Italy) sequences and calculate focal mechanisms. This seismicity clusters along an E–W, dextral strike–slip structure. Second-order clusters are also present and reflect the activation of minor shears. The depth distribution of earthquakes evidences a peak between 14 and 20 km, within the basement of the subducting Apulian plate. The analysed seismicity does not mirror that of Southern Apennines, which include NW–SE striking normal faults and earthquakes concentrated within the first 15 km of the crust. We suggest that the E–W faults affecting the foreland region of Apennine propagate up to 25 km of depth. The Potenza earthquakes reflect the reactivation of a deep, preexisting fault system. We conclude that the seismotectonic setting of Apennines is characterized by NW–SE normal faults affecting the upper 15 km of the crust, and by E–W deeper strike–slip faults cutting the crystalline basement of the chain.  相似文献   

4.
In this study, we analyze the recent (1990–1997) seismicity that affected the northern sector (Sannio–Benevento area) of the Southern Apennines chain. We applied the Best Estimate Method (BEM), which collapses hypocentral clouds, to the events of low energy (Md max=4.1) seismic sequences in order to constrain the location and geometry of the seismogenetic structures. The results indicate that earthquakes aligned along three main structures: two sub-parallel structures striking NW–SE (1990–1992, Benevento sequence) and one structure striking NE–SW (1997, Sannio sequence). The southernmost NW–SE structure, which dips towards NE, overlies the fault that is likely to be responsible for a larger historical earthquake (Io max=XI MCS, 1688 earthquake). The northernmost NW–SE striking structure dips towards SW. The NE–SW striking structure is sub-vertical and it is located at the northern tip of the fault segment supposed to be responsible for the 1688 earthquake. The spatio-temporal evolution of the 1990–1997 seismicity indicates a progressive migration from SE (Benevento) to NW (Sannio) associated to a deepening of hypocenters (i.e., from about 5 to 12 km). Hypocenters cluster at the interface between the major structural discontinuities (e.g., pre-existing thrust surfaces) or within higher rigidity layers (e.g., the Apulia carbonates). Available focal mechanisms from earthquakes occurred on the recognized NW–SE and NE–SW faults are consistent with dip-slip normal solutions. This evidences the occurrence of coexisting NW–SE and NE–SW extensions in Southern Apennines.  相似文献   

5.
This paper considers the results of detailed paleoseismic and geological investigations in a key site in the wall of the Imandra Lake depression (Kola Peninsula Region, Northeast of the Fennoscandian Shield). Study of different groups of paleoseismic deformations developed in the fault zone and the application of new methods and techniques made it possible to identify a large seismotectonic zone characterized by great earthquakes at the end of the Late Glacial and in the Holocene. The investigation data are indicative of the necessity to estimate the seismic potential in the Kola Atomic plant area in a different way.  相似文献   

6.
This paper describes an integrated ground deformation and gravity network aimed at monitoring volcano-tectonic movements in the Campanian area (Southern Italy). It covers an area of more than 3000 km2, including the volcanic centres of Somma-Vesuvius, Campi Flegrei caldera and Ischia island. Levelling, EDM and gravity networks, as well as periodic and continuous GPS measurements are carried out. The aim of the network is twofold: monitoring ground deformations in the above mentioned volcanic areas, and studying the complex tectonics of the Campania Plain, a graben-like structure in which the Neapolitan volcanism is concentrated, in relation to the tectonics of the Southern Apennines and of the Tyrrhenian Basin. The monitoring network consists of larger-scale levelling, EDM and GPS networks covering the whole Campania Plain, connected to the relatively stable areas of Apennines, together with smaller scale networks aimed at accurately monitoring the Somma-Vesuvius volcano, one of the most dangerous over the World due to the high degree of urban development. The Somma-Vesuvius is monitored by levelling network, over 200 km long, by periodic EDM and GPS measurements and by a small network of continuously recording GPS receivers. Moreover, high precision gravimetry is also employed to deep the knowledge of the dynamic framework of the area. The main results indicate that Mt. Vesuvius and the island of Ischia are currently quiescent, while Campi Flegrei are subject to significant slow vertical ground movements, known as “bradyseism”. Recently, two large uplifts, both of about 1.8 m, affected the area respectively in 1970–72 and 1982–84.  相似文献   

7.
Recent seismicity in and around the Gargano Promontory, an uplifted portion of the Southern Adriatic Foreland domain, indicates active E–W strike-slip faulting in a region that has also been struck by large historical earthquakes, particularly along the Mattinata Fault. Seismic profiles published in the past two decades show that the pattern of tectonic deformation along the E–W-trending segment of the Gondola Fault Zone, the offshore counterpart of the Mattinata Fault, is strikingly similar to that observed onshore during the Eocene–Pliocene interval. Based on the lack of instrumental seismicity in the south Adriatic offshore, however, and on standard seismic reflection data showing an undisturbed Quaternary succession above the Gondola Fault Zone, this fault zone has been interpreted as essentially inactive since the Pliocene. Nevertheless, many investigators emphasised the genetic relationships and physical continuity between the Mattinata Fault, a positively active tectonic feature, and the Gondola Fault Zone. The seismotectonic potential of the system formed by these two faults has never been investigated in detail. Recent investigations of Quaternary sedimentary successions on the Adriatic shelf, by means of very high-resolution seismic–stratigraphic data, have led to the identification of fold growth and fault propagation in Middle–Upper Pleistocene and Holocene units. The inferred pattern of gentle folding and shallow faulting indicates that sediments deposited during the past ca. 450 ka were recurrently deformed along the E–W branch of the Gondola Fault Zone.We performed a detailed reconstruction and kinematic interpretation of the most recent deformation observed along the Gondola Fault Zone and interpret it in the broader context of the seismotectonic setting of the Southern Apennines-foreland region. We hypothesise that the entire 180 km-long Molise–Gondola Shear Zone is presently active and speculate that also its offshore portion, the Gondola Fault Zone, has a seismogenic behaviour.  相似文献   

8.
We analyzed the instrumental seismicity of Southern Italy in the area including the Lucanian Apennines and Bradano foredeep, making use of the most recent seismological data base available so far. P- and S-wave arrival times, recorded by the Italian National Seismic Network (RSNC) operated by the Istituto Nazionale di Geofisica e Vulcanologia (INGV), were re-picked along with those of the SAPTEX temporary array deployed in the region in the period 2001–2004. For some events located in the upper Val d'Agri, we also used data from the Eni-Agip oil company seismic network. We examined the seismicity occurred during the period between 2001 and 2006, considering 514 events with magnitudes M  2.0. We computed the VP/VS ratio obtaining a value of 1.83 and we carried out an analysis for the one-dimensional (1D) velocity model that approximates the seismic structure of the study area. Earthquakes were relocated and, for well- recorded events, we also computed 108 fault plane solutions. Finally, using 58 solutions, the most constrained, we computed regional stress field in the study area.Earthquake distribution shows three main seismic regions: the westernmost (Lucanian Apennines) characterized by high background seismicity, mostly with shallow hypocenters, the easternmost below the Bradano foredeep and the Murge with deeper and more scattered seismicity, and finally the more isolated and sparse seismicity localized in the Sila Range and in the offshore area along the northeastern Calabrian coast. Focal mechanisms computed in this work are in large part normal and strike-slip solutions and their tensional axes (T-axes) have a generalized NE–SW orientation. The denser station coverage allowed us to improve hypocenters determination compared to those obtained by using only RSNC data, for a better characterization of the crustal and subcrustal seismicity in the study area.  相似文献   

9.
This work involves updating the evaluation of seismic hazard in Northeast Algeria by a probabilistic approach. This reassessment attempts to resolve inconsistencies between seismic zoning in regional building codes and is further motivated by the need to refine the input data that are used to evaluate seismic hazard scenarios. We adopted a seismotectonic model that accounts for differences in interpretations of regional seismicity. We then performed a probabilistic assessment of regional seismic hazard in Northeast Algeria. Based on a homogeneous earthquake catalog and geological and seismotectonic data gathered in the first part of the study, a seismotectonic zoning map was created and seven risk areas were identified. For each area, peak ground acceleration hazard maps were produced. Details of the calculations are provided, including hazard curves at periods of 0.1, 0.2, 0.33, 0.5, 1.0, and 2.0 s and uniform hazard spectra at urban locations in the area, including Sétif, Constantine, Kherrata, Bejaia, and Jijel.  相似文献   

10.
The 2002 earthquake sequence of October 31 and November 1 (main shocks Mw = 5.7) struck an area of the Molise region in Southern Italy. In this paper we analyzed the co-seismic deformation related to the Molise seismic sequence, inferred from GPS data collected before and after the earthquake, that ruptured a rather deep portion of crust releasing a moderate amount of seismic energy with no surface rupture. The GPS data have been reduced using two different processing strategies and softwares (Bernese and GIPSY) to have an increased control over the result accuracy, since the expected surface displacements induced by the Molise earthquake are in the order of the GPS reliability. The surface deformations obtained from the two approaches are statistically equivalent and show a displacement field consistent with the expected deformation mechanism and with no rupture at the surface. In order to relate this observation with the seismic source, an elastic modeling of fault dislocation rupture has been performed using seismological parameters as constraints to the model input and comparing calculated surface displacements with the observed ones. The sum of the seismic moments (8.9 × 1017 Nm) of the two main events have been used as a constraint for the size and amount of slip on the model fault while its geometry has been constrained using the focal mechanisms and aftershocks locations. Since the two main shocks exhibit the same fault parameters (strike of the plane, dip and co-seismic slip), we modelled a single square fault, size of 15 km × 15 km, assumed to accommodate the whole rupture of both events of the seismic sequence. A vertical E–W trending fault (strike = 266°) has been modeled, with a horizontal slip of 120 mm. Sensitivity tests have been performed to infer the slip distribution at depth. The comparison between GPS observations and displacement vectors predicted by the dislocation model is consistent with a source fault placed between 5 and 20 km of depth with a constant pure right-lateral strike-slip in agreement with fault slip distribution analyses using seismological information. The GPS strain field obtained doesn't require a geodetic moment release larger than the one inferred from the seismological information ruling out significant post-seismic deformation or geodetic deformation released at frequencies not detectable by seismic instruments. The Molise sequence has a critical seismotectonic significance because it occurred in an area where no historical seismicity or seismogenic faults are reported. The focal location of the sequence and the strike-slip kinematics of main shocks allow to distinguish it from the shallower and extensional seismicity of the southern Apennines being more likely related to the decoupling of the southern Adriatic block from the northern one.  相似文献   

11.
Chemostratigraphic analyses (87Sr/86Sr, δ13Ccarb) of limestones from two Jurassic platform‐carbonate sequences in Italy (Trento and Campania–Lucania Platforms) illustrate previously established trends found in pelagic sediments and skeletal carbonates from biostratigraphically well‐calibrated sections elsewhere in Europe. Chemostratigraphic correlations between the platform‐carbonate successions and appropriate intervals from well‐dated reference sections allow the application of high‐resolution stratigraphy to these shallow‐water peritidal carbonates and, furthermore, elucidate the facies response to the Early Toarcian Oceanic Anoxic Event (OAE). Lower Jurassic (Toarcian) levels of the western Trento Platform (Southern Alps, Northern Italy) contain spiculitic cherts that appear where rising carbon‐isotope values characterize the onset of the OAE: a palaeoceanographic phenomenon interpreted as driven by increased nutrient levels in near‐surface waters. There is a facies change to more clay‐rich facies at the level of the abrupt negative carbon‐isotope excursion, also characteristic of the OAE, higher in the section. The Campania–Lucania Platform (Southern Apennines, Southern Italy) records a change to more clay‐rich facies where carbon‐isotope values begin to rise at the beginning of the OAE but the negative excursion, higher in the section, occurs within oolitic facies. Although, in both examples, the Early Toarcian OAE can be recognized by a change to more clay‐rich lithologies, this facies development is diachronous and in neither case did the platform drown. Although the Trento Platform, in the south‐west sector studied here, was adversely affected by the OAE, it did not drown definitively until Late Aalenian time; the Campania–Lucania Platform persisted throughout the Jurassic and Cretaceous. Differential subsidence rates, which can be calculated using comparative chemostratigraphy, are identified as a crucial factor in the divergent behaviour of these two carbonate platforms: relatively fast in the case of the Trento Platform; relatively slow in the case of the Campania–Lucania Platform. It is proposed that where water depths remained as shallow as a few metres during the OAE (Campania–Lucania Platform), dissolved oxygen levels remained high, nutrient levels relatively low and conditions for carbonate secretion and precipitation remained relatively favourable, whereas more poorly ventilated and/or more nutrient‐rich waters (Trento Platform) adversely influenced platform growth where depths were in the tens of metres range. The stage was thus set for drowning on the more rapidly subsiding western margin of the Trento Plateau and a pulse of oolite deposition post‐dating the OAE was insufficient to revitalize the carbonate factory.  相似文献   

12.
The results of deep seismic profiling through Southern Sakhalin, the southern Sea of Okhotsk, and the Southern Kuril Islands allowed the identification of deep fault zones, the hypocenter locations, the features of the stress state, and the types of seismic dislocations at the earthquake sources. The east side of the fault was upthrown relative to the west side beneath the southern part of the Tatar Strait and Sakhalin Island and led, as a result of multiple thrusting events along the fault over the geologic history, to the rise and 5-8 km displacement of the seismic boundaries. The true uplift of the Greater Kuril arc block was determined using the focal mechanism solutions. The seismoctectonics and present-day dynamics of the crustal blocks were estimated using a detailed joint analysis of the position of the structural boundaries at the seismic section and the seismotectonic movements according to the earthquake focal mechanisms.  相似文献   

13.
A seismological evaluation of the Red Sea margin is presented in this contribution based on the concept of seismotectonic regionalization. The geology and the tectonic structure are critically reviewed to define regions of homogeneous seismicity in the study area, and available seismicity data are implemented to estimate the seismic parameters of the region. The results of the study are applied to evaluate the seismic hazard of an offshore platform site.  相似文献   

14.
This paper is based on the data obtained during the field study of active faults carried out in 2005–2006 in the Chita and Amur oblast and South Yakutia in connection with detailed seismic demarcation of the projected East Siberia-Pacific Ocean pipeline route. The comprehensive geomorphic and geophysical fieldwork was focused on paleoseismogeology and accompanied by trenching in the zones of reactivated faults. These works allowed us to specify the available information on the present-day structure, seismotectonic regime, and potential seismic hazard of the conjugation of the Baikal Rift Zone and the arched-block rise of the Stanovoi Ridge.  相似文献   

15.
Nappi  R.  Gaudiosi  G.  Alessio  G.  De Lucia  M.  Porfido  S. 《Natural Hazards》2016,86(2):295-324

The aim of this study was to provide a contribution to seismic hazard assessment of the Salento Peninsula (Apulia, southern Italy). It is well known that this area was struck by the February 20, 1743, earthquake (I 0 = IX and M w = 7.1), the strongest seismic event of Salento, that caused the most severe damage in the towns of Nardò (Lecce) and Francavilla Fontana (Brindisi), in the Ionian Islands (Greece) and in the western coast of Albania. It was also widely felt in the western coast of Greece, in Malta Islands, in southern Italy and in some localities of central and northern Italy. Moreover, the area of the Salento Peninsula has also been hit by several low-energy and a few high-energy earthquakes over the last centuries; the instrumental recent seismicity is mainly concentrated in the western sector of the peninsula and in the Otranto Channel. The Salento area has also experienced destructive seismicity of neighboring regions in Italy (the Gargano Promontory in northern Apulia, the Southern Apennines chain, the Calabrian Arc) and in the Balkan Peninsula (Greece and Albania). Accordingly, a critical analysis of several documentary and historical sources, as well as of the geologic–geomorphologic ground effects due to the strong 1743 Salento earthquake, has been carried out by the authors in this paper; the final purpose has been to re-evaluate the 1743 MCS macroseismic intensities and to provide a list of newly classified localities according to the ESI-07 scale on the base of recognized Earthquake Environmental Effects. The result is a quite different damage scenario due to this earthquake that could raise the seismic potential currently recognized for the Salento area, and consequently upgrade the seismic hazard classification of the Salento. Indeed it is important to remind that currently, despite the intense earthquake activity recorded not only in the Otranto Channel, but especially in Greece and Albania, this area is classified in the least dangerous category of the Seismic Classification of the Italian territory (IV category).

  相似文献   

16.
Probabilistic seismic hazard analysis (PSHA) along the route of an offshore pipeline for the transport of oil in the Bay of Bengal has been performed, in order to set up design parameters and identify possible geohazards. The complexity of geological and seismotectonic setting of the region where the pipeline is planned to be installed is the result of the interaction of the Indian, Eurasian and Burmese tectonic plates. In order to properly account for the intricate way by which these plates interact, a large area extending 450 km from the pipeline route has been considered for the compilation of a comprehensive earthquake catalogue, spanning the period 1663–2012 AD. Differently from earlier PSHA analyses conducted in the region based on assuming two-dimensional polygons as seismogenic provinces, this study adopted a seismotectonic source model which also includes for the first time a linear tectonic lineament representing the northward extension of the Sunda mega thrust, responsible for the large Sumatra–Andaman earthquake of 26 December 2004. Hazard computations have been performed over a grid of sites spaced 0.045° covering a rectangular area which contains the pipeline. Epistemic uncertainty in the hazard computations has been taken into account by a logic tree framework, incorporating different seismotectonic source models, maximum cut-off magnitude and ground-motion prediction equations. Horizontal median uniform hazard spectra and median uniform hazard spectra plus and minus one sigma on stiff ground have been calculated at the selected sites for different return periods. Peak ground acceleration with 10 % probability of exceedance in 50 years has been compared with values from previous hazard studies available for Bangladesh.  相似文献   

17.
18.
A combined seismic and gravimetric interpretation in the Northern Apennines area (Italy) is presented. To the knowledge of the authors, this is one of the few attempts to apply tomographic methodology to a seismic refraction profile. This procedure, together with the classical interpretation for defining lower reflectors, led to the formulation of quite an accurate model of the upper crust. A gravity analysis was performed concurrently taking into account the seismic results at different depths which correspond to different frequency domains in the gravity signal. While the medium- and high-frequency patterns have been solved by trial-and-error, the regional trend has been modelled applying the collocation procedure to the gravity data.  相似文献   

19.
The aim of this study was to provide a contribution to seismic hazard assessment of the Salento Peninsula (Apulia, southern Italy). It is well known that this area was struck by the February 20, 1743, earthquake (I 0 = IX and M w = 7.1), the strongest seismic event of Salento, that caused the most severe damage in the towns of Nardò (Lecce) and Francavilla Fontana (Brindisi), in the Ionian Islands (Greece) and in the western coast of Albania. It was also widely felt in the western coast of Greece, in Malta Islands, in southern Italy and in some localities of central and northern Italy. Moreover, the area of the Salento Peninsula has also been hit by several low-energy and a few high-energy earthquakes over the last centuries; the instrumental recent seismicity is mainly concentrated in the western sector of the peninsula and in the Otranto Channel. The Salento area has also experienced destructive seismicity of neighboring regions in Italy (the Gargano Promontory in northern Apulia, the Southern Apennines chain, the Calabrian Arc) and in the Balkan Peninsula (Greece and Albania). Accordingly, a critical analysis of several documentary and historical sources, as well as of the geologic–geomorphologic ground effects due to the strong 1743 Salento earthquake, has been carried out by the authors in this paper; the final purpose has been to re-evaluate the 1743 MCS macroseismic intensities and to provide a list of newly classified localities according to the ESI-07 scale on the base of recognized Earthquake Environmental Effects. The result is a quite different damage scenario due to this earthquake that could raise the seismic potential currently recognized for the Salento area, and consequently upgrade the seismic hazard classification of the Salento. Indeed it is important to remind that currently, despite the intense earthquake activity recorded not only in the Otranto Channel, but especially in Greece and Albania, this area is classified in the least dangerous category of the Seismic Classification of the Italian territory (IV category).  相似文献   

20.
The September 24, 1999 Ahram Earthquake in southwestern Iran was moderate in energy (M = 5.0–5.5 from different sources) and did not entail significant destruction and casualities. The tectonic position of the source zone, surficial seismic dislocations, and results of macroseismic and seismological study of this seismic event in the junction zone of the Zagros Fold System and the piedmont plain are described in the paper, including data on rejuvenated ancient ruptures exposed in two trenches excavated across the strike of the regional Kazerun-Borazjan Fault. One of the trenches was driven a few months before and the other a year after this seismic event. The conclusion is drawn that new deformations in the Quaternary near-surface sediments observed at the walls of both trenches may be regarded as unusual seismic ruptures of the Ahram earthquake. These ruptures, described as proved primary seismic dislocations of such a moderate seismic event, are a unique phenomenon in the world seismotectonic practice. The localization of the earthquake source zone in the Kazerun-Borazjan Fault Zone with complex kinematics makes it possible to study the internal structure of one of the most important tectonic lines of the Zagros Fold Region.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号