共查询到20条相似文献，搜索用时 24 毫秒
1.
傅里叶有限差分法(FFD)能够处理复杂地质构造中的波传播问题,但对陡倾角成像仍有明显的误差.优化参数的方法能够在保持计算效率的前提下进一步提高陡倾角的成像精度.本文在有理近似的基础上,将FFD算子展开式中的常系数由两个拓展为四个,然后采用模拟退火算法对这四个参数进行全局优化.本方法除了考虑速度对比度以外,还考虑了频率和延拓步长等参量的影响.理论误差分析和脉冲响应测试均表明该方法能极大地提高FFD算子的精确传播角度.二维SEG/EAGE盐丘模型实验表明本文方法对陡倾角以及盐下构造的成像精度明显高于未优化的FFD法.将本文的方法与交替方向加插值的方法结合应用于三维脉冲响应测试更进一步证实了本文方法的有效性. 相似文献
2.
The improvement in accuracy and efficiency of wave-equation migration techniques is an ongoing topic of research. The main problem is the correct imaging of steeply dipping reflectors in media with strong lateral velocity variations. We propose an improved migration method which is based on cascading phase-shift and finite-difference operators for downward continuation. Due to these cascaded operators we call this method‘Fourier finite-difference migration’(FFD migration). In our approach we try to generalize and improve the split-step Fourier migration method for strong lateral velocity variations using an additional finite-difference correction term. Like most of the current migration methods in use today, our method is based on the one-way wave equation. It is solved by first applying the square-root operator but using a constant velocity at each depth step which has to be the minimum velocity. In a second step, the approximate difference between the correct square-root operator and this constant-velocity squareroot operator (the error made in the first step) is implemented as an implicit FD migration scheme, part of which is the split-step Fourier correction term. Some practical aspects of the new FFD method are discussed. Its performance is compared with that of split-step and standard FD migration schemes. First applications to synthetic and real data sets are presented. They show that the superiority of FFD migration becomes evident by migrating steeply dipping reflectors with complex overburden having strong lateral velocity variations. If velocity is laterally constant, FFD migration has the accuracy of the phase-shift method. The maximum migration angle is velocity adaptive, in contrast to conventional FD migration schemes. It varies laterally depending on the local level of velocity variation. FFD migration is more efficient than higher-order implicit FD schemes. These schemes use two cascaded downward-continuation steps in order to attain comparable migration performance. 相似文献
3.
O. HOLBERG 《Geophysical Prospecting》1988,36(2):99-114
Numerical wavefield extrapolation represents the backbone of any algorithm for depth migration pre- or post-stack. For such depth imaging techniques to yield reliable and interpretable results, the underlying wavefield extrapolation algorithm must propagate the waves through inhomogeneous media with a minimum of numerically induced distortion, over a range of frequencies and angles of propagation. A review of finite-difference (FD) approximations to the acoustic one-way wave equation in the space-frequency domain is presented. A straightforward generalization of the conventional FD formulation leads to an algorithm where the wavefield is continued downwards with space-variant symmetric convolutional operators. The operators can be precomputed and made accessible in tables such that the ratio between the temporal frequency and the local velocity is used to determine the correct operator at each grid point during the downward continuation. Convolutional operators are designed to fit the desired dispersion relation over a range of frequencies and angles of propagation such that the resulting numerical distortion is minimized. The optimization is constrained to ensure that evanescent energy and waves propagating at angles higher than the maximum design angle are attenuated in each extrapolation step. The resulting operators may be viewed as optimally truncated and bandlimited spatial versions of the familiar phase shift operator. They are unconditionally stable and can be applied explicitly. This results in a simple wave propagation algorithm, eminently suited for implementation on pipelined computers and on large parallel computing systems. 相似文献
4.
The phase‐shift‐plus‐interpolation and extended‐split‐step‐Fourier methods are wavefield‐continuation algorithms for seismic migration imaging. These two methods can be applied to regions with complex geological structures. Based on their unified separable formulas, we show that these two methods have the same kinematic characteristics by using the theory of pseudodifferential operators. Numerical tests on a Marmousi model demonstrate this conclusion. Another important aspect of these two methods is the selection of reference velocities and we explore the influence of the selection of reference velocities by comparing the geometric progression method and the statistical method. We show that the geometric progression method is simple but does not take into account the velocity distribution while the statistical approach is relatively complex but reflects the velocity distribution. 相似文献
5.
The Fourier finite‐difference propagator and the generalized‐screen propagator are two general high‐order forms of one‐way dual‐domain methods. We compare these two propagators mainly on phase accuracy, computational efficiency and 3D extension. A comparison of phase accuracy shows that the high‐order generalized‐screen propagator is preferable to the Fourier finite‐difference propagator for heterogeneous media with a weak velocity contrast and wide dip angle. With increasing velocity contrast, the accuracy improvement gained by the high‐order generalized‐screen propagator declines rapidly. The Fourier finite‐difference propagator is more robust and flexible to lateral velocity variations than the generalized‐screen propagator. The 2D Fourier finite‐difference propagator is superior to the 2D generalized‐screen propagator when the velocity contrast is stronger than 23%. Despite the two‐way splitting error, the 3D Fourier finite‐difference propagator is more accurate than the second‐order generalized‐screen propagator when the velocity contrast is stronger than 20% and is more accurate than the fourth‐order generalized‐screen propagator when the velocity contrast is stronger than 40%. Numerical experiments on the SEG/EAGE salt model demonstrate that the Fourier finite‐difference propagator behaves better than the generalized‐screen propagator when imaging steep salt boundary and faults beneath the salt body. Under the same hardware and software conditions, the computational cost of the Fourier finite‐difference propagator in our implementation is greater than that of the second‐order generalized‐screen propagator but smaller than that of the third‐order generalized‐screen propagator. Compared with the Fourier finite‐difference propagator, the generalized‐screen propagator requires fewer grid points per wavelength and has more potential to improve running speed in the presence of a much faster Fourier transform. These analyses are applicable for both forward modelling and depth migration. 相似文献
6.
时间域常Q黏声波方程,由于含分数阶时间导数项,数值求解需要大量内存,计算效率低,不利于地震偏移的实施.通过一系列近似,可将该方程简化为介质频散效应和衰减效应解耦的分数阶拉普拉斯算子黏声波方程,数值求解内存需求少,计算效率高.本文采用交错网格有限差分逼近时间导数,改进的伪谱法计算空间导数,PML吸收边界去除边界反射,对该方程进行数值离散和地震正演模拟,开展地震数据的黏声介质逆时偏移,实现波场逆时延拓过程中同时完成频散校正和衰减补偿.改善深层构造的成像精度,数值结果表明,基于分数阶拉普拉斯算子解耦的黏声介质地震正演模拟与逆时偏移可大幅度提高地震模拟计算效率,偏移剖面明显优于常规声波偏移剖面,极大改善深层构造的成像品质. 相似文献
7.
复杂构造中单程波与双程波方法模拟结果的比较表明,就地震勘探中主要关心的一次反射波而言,单程波算法已具有足够的精度. 使用单程波方程将极大地减少数值计算的计算量,同时对介质的几何和物理参数建模也降低了要求. 单程波算法可视为深度偏移的“逆运算”,这样可以很好地借用已知的深度偏移方法及其程序系统. 基于计算效率和计算精度的双重考虑,本文在介质速度结构较复杂时采用显式短算子波场延拓方法,而在介质速度结构相对简单时采用分裂步相移法. 反射系数的计算中考虑了其随入射角的变化. 相似文献
8.
傅里叶有限差分(FFD)法兼有相位屏法和隐式有限差分法二者的优势,能够处理复杂地质构造中的波传播问题,但在三维情形下,算子的双向分裂会引起明显的方位各向异性误差.本文用Fourier变换计算双向分裂过程中的高阶交叉项,消除了方位各向异性误差.该方法充分利用了FFD法在双域实现的算法结构,明显减少了由于引入误差校正所带来的计算量.将该方法应用于修改后的三维French模型的地震正演问题,并将得到的叠后记录、单炮记录同全波有限差分法的模拟结果进行对比,结果证实了该方法对一次反射波具有较高的模拟精度,在内存需求和计算效率方面则具有更大的优势. 相似文献
9.
Wave‐equation migration velocity analysis is a technique designed to extract and update velocity information from migrated images. The velocity model is updated through the process of optimizing the coherence of images migrated with the known background velocity model. The capacity for handling multi‐pathing of the technique makes it appropriate in complex subsurface regions characterized by strong velocity variation. Wave‐equation migration velocity analysis operates by establishing a linear relation between a slowness perturbation and a corresponding image perturbation. The linear relationship and the corresponding linearized operator are derived from conventional extrapolation operators and the linearized operator inherits the main properties of frequency‐domain wavefield extrapolation. A key step in the implementation is to design an appropriate procedure for constructing an image perturbation relative to a reference image that represents the difference between the current image and a true, or more correct image of the subsurface geology. The target of the inversion is to minimize such an image perturbation by optimizing the velocity model. Using time‐shift common‐image gathers, one can characterize the imperfections of migrated images by defining the focusing error as the shift of the focus of reflections along the time‐shift axis. The focusing error is then transformed into an image perturbation by focusing analysis under the linear approximation. As the focusing error is caused by the incorrect velocity model, the resulting image perturbation can be considered as a mapping of the velocity model error in the image space. Such an approach for constructing the image perturbation is computationally efficient and simple to implement. The technique also provides a new alternative for using focusing information in wavefield‐based velocity model building. Synthetic examples demonstrate the successful application of our method to a layered model and a subsalt velocity update problem. 相似文献
10.
One of the weaknesses of the operator splitting method (OSM) is that its corrector step employs the approximation that incremental forces are linearly related to the tested structure's initial stiffness matrix. This paper presents a new predictor–corrector technique in which the assumptions about the tested structure's response are shifted to the predictor step, which results in an enhancement in overall simulation accuracy, especially for nonlinear structures. Unlike OSM, which splits the displacement and velocity operators into explicit and implicit terms, the new method uses predicted accelerations to compute fully explicit displacement and velocity values in the predictor step. Another advantage of the proposed technique, termed the full operator method (FOM) is that its formulation makes it suitable for both quasi‐static and real‐time hybrid simulation. The effectiveness of FOM is first evaluated by investigating error propagation in an undamped single degree‐of‐freedom model. It is shown that the corrector step in FOM is able to significantly suppress aberrant simulation results caused by incorrect estimation of the structure's stiffness matrix. The performance of FOM is demonstrated by exercising two additional models, which exhibit significant inelastic behavior under the prescribed excitation. The simulation results show that the proposed FOM algorithm is capable of producing accurate solutions and that the corrector step is influential in effectively reducing simulation errors. It is also shown that FOM suppresses actuator displacement control errors because of its reliance on measured quantities in the corrector step. Copyright © 2009 John Wiley & Sons, Ltd. 相似文献
11.
Acoustic finite-difference modeling beyond conventi-onal Courant-Friedrichs-Lewy stability limit: App-roach based on variable-length temporal and spatial operators 
下载免费PDF全文
下载免费PDF全文 Conventional finite-difference (FD) methods cannot model acoustic wave propagation beyond Courant-Friedrichs-Lewy (CFL) numbers 0.707 and 0.577 for two-dimensional (2D) and three-dimensional (3D) equal spacing cases, respectively, thereby limiting time step selection. Based on the definition of temporal and spatial FD operators, we propose a variable-length temporal and spatial operator strategy to model wave propagation beyond those CFL numbers while preserving accuracy. First, to simulate wave propagation beyond the conventional CFL stability limit, the lengths of the temporal operators are modified to exceed the lengths of the spatial operators for high-velocity zones. Second, to preserve the modeling accuracy, the velocity-dependent lengths of the temporal and spatial operators are adaptively varied. The maximum CFL numbers for the proposed method can reach 1.25 and 1.0 in high velocity contrast 2D and 3D simulation examples, respec-tively. We demonstrate the effectiveness of our method by modeling wave propagation in simple and complex media. 相似文献
12.
C.J. Thomson 《Geophysical Prospecting》2012,60(1):64-92
The reflection operator for a simple flat‐lying interface can be thought of as the set of all its plane‐wave reflection coefficients or as the set of virtual surveys with sources and receivers along the interface. When there is dip, however, it is necessary to include the varying effects of propagation between the virtual‐survey level and the interface. Hence, step one in this paper is to derive the reflection operator for a dipping plane interface as observed at a datum level some distance away. The key assumption is that the aperture at the datum level is sufficient to characterize the reflector properties around a particular point. This translates into an assumption that the dip is moderate, though no explicit small‐angle approximation is required. The second step is to find the apparent reflection operator that would relate data that have been extrapolated from the datum towards and possibly beyond the reflector using an assumed migration velocity. This apparent reflection operator is closely related to extended common‐image gathers. The apparent reflection operator may be analysed asymptotically in terms of rays and other signals, shedding light on the structure of extended image gathers. In keeping with the virtual‐survey idea, the results are considered in a subsurface space‐time or slowness‐time domain at various extrapolation levels around the interface. An important distinction is drawn between using subsurface midpoint‐offset coordinates and the wavefield coordinates of the incident and reflected waves. The latter reveal more clearly the effects of dip, because they lead to a more asymmetric apparent reflection operator. Properties such as an up‐dip shift of a traveltime minimum and its associated curvature theoretically provide information about the reflector location and dip and the migration‐velocity error. The space‐time form of the reflection operator can be highly intricate around the offset‐time origin and it was described for a simple flat interface in a background paper. To avoid a layer of mathematics, the reflection‐operator formulas presented here are in the intermediate space‐frequency domain. They are analysed by considering their stationary‐phase and branch‐point high‐frequency contributions. There is no Born‐like assumption of weak reflector contrast and so wide‐angle, total reflection and head‐wave effects are included. Snell’s law is an explicit part of the theory. It is hoped that the work will therefore be a step towards the goal of unifying amplitude‐versus‐offset, imaging and waveform inversion. 相似文献
13.
波动方程宽角抛物逼近得到的通常是非常系数的单程波传播算子,其系数是速度横向变化的函数,因此需要利用有限差分(FD)进行数值实施. 通过对Lippmann Schwinger单程波动积分方程的退化核逼近,本文研究了一类宽角退化算子的偏移成像. 这种退化偏移算子只用快速Fourier变换进行波场延拓,将常规的Fourier分裂步地震偏移方法(SSF)推广适应强速度横向变化介质和大角度传播波场. 退化的Fourier偏移算子通过在两个分裂步项之间作波数域线性插值来实现波场延拓,每延拓一层需要比常规的SSF地震偏移方法多一次快速Fourier变换(FFT). 通过SEG/EAGE盐丘模型和实际地震资料的应用表明,退化Fourier偏移算子能很好地对盐下的陡倾角断层和实际地震剖面上的复杂小断块和大断裂地质构造成像. 相似文献
14.
Double-square-root one-way wave equation prestack tau migration in heterogeneous media 总被引：1，自引：0，他引：1
In this paper, source‐receiver migration based on the double‐square‐root one‐way wave equation is modified to operate in the two‐way vertical traveltime (τ) domain. This tau migration method includes reasonable treatment for media with lateral inhomogeneity. It is implemented by recursive wavefield extrapolation with a frequency‐wavenumber domain phase shift in a constant background medium, followed by a phase correction in the frequency‐space domain, which accommodates moderate lateral velocity variations. More advanced τ‐domain double‐square‐root wave propagators have been conceptually discussed in this paper for migration in media with stronger lateral velocity variations. To address the problems that the full 3D double‐square‐root equation prestack tau migration could meet in practical applications, we present a method for downward continuing common‐azimuth data, which is based on a stationary‐phase approximation of the full 3D migration operator in the theoretical frame of prestack tau migration of cross‐line constant offset data. Migrations of synthetic data sets show that our tau migration approach has good performance in strong contrast media. The real data example demonstrates that common‐azimuth prestack tau migration has improved the delineation of the geological structures and stratigraphic configurations in a complex fault area. Prestack tau migration has some inherent robust characteristics usually associated with prestack time migration. It follows a velocity‐independent anti‐aliasing criterion that generally leads to reduction of the computation cost for typical vertical velocity variations. Moreover, this τ‐domain source‐receiver migration method has features that could be of help to speed up the convergence of the velocity estimation. 相似文献
15.
非稳态相移法叠前深度偏移 总被引：5，自引：3，他引：2
介绍一种能够适应介质速度横向变化的非稳态相移算子及其叠前深度偏移方法．为了克服常规相移偏移算法中要求速度横向不变的缺点,出现了基于非稳态滤波器理论的非稳态相移算子,即PSPI算子、NSPS算子和SNPS算子,其中SNPS算子是将前二者结合起来的一种对称的非稳态相移算子,它比前二者具有更高的精度和稳定性．为了提高运算速度,基于非稳态相移算子的叠前深度偏移算法采取了分片均匀近似的策略,Marmousi模型的叠前深度偏移结果证明了该算法的可行性和有效性。 相似文献
16.
Ru-Shan Wu 《Pure and Applied Geophysics》1996,148(1-2):155-173
When reverberations between heterogeneities or resonance scattering can be neglected but accumulated effects of forward scattering are strong, the Born approximation is not valid but the De Wolf approximation can be applied in such cases. In this paper, renormalized MFSB (multiple-forescattering single-backscattering) equations and the dual-domain expression for scalar, acoustic and elastic waves are derived by a unified approach. Two versions of the one-return method (using MFSB approximation) are given: One is the wide-angle dual-domain formulation (thin-slab approximation); the other is the screen approximation. In the screen approximation, which involves a small-angle approximation for the wave-medium interaction, it can be seen clearly that the forward scattered, or transmitted waves are mainly controlled by velocity perturbations; while the backscattered or reflected waves, by impedance perturbations. The validity of the method and the wide-angle capability of the dual-domain implementation are demonstrated by numerical examples. Reflection coefficients of a plane interface derived from numerical simulations by the wide-angle method match the theoretical curves well up to critical angles. For the reflections of a low-velocity slab, the agreement between theory and synthetics only starts to deteriorate for angles greater than 70°. The accuracy of the wide-angle version of the method could be further improved by optimizing the wave-number filtering for the forward propagation and shrinking the step length along the propagation direction. 相似文献
17.
Land seismic data quality can be severely affected by near‐surface anomalies. The imprint of a complex near‐surface can be removed by redatuming the data to a level below the surface, from where the subsurface structures are assumed to be relatively smooth. However, to derive a velocity‐depth model that explains the propagation effects of the near‐surface is a non‐trivial task. Therefore, an alternative approach has been proposed, where the redatuming operators are obtained in a data‐driven manner from the reflection event related to the datum. In the current implementation, the estimation of these redatuming operators is done in terms of traveltimes only, based on a high‐frequency approximation. The accompanying amplitudes are usually derived from a local homogeneous medium, which is obviously a simplification of reality. Such parametrization has produced encouraging results in the past but cannot completely remove the near‐surface complexities, leaving artefacts in the redatumed results. In this paper we propose a method that estimates the redatuming operators directly from the data, i.e., without using a velocity model, in a full waveform manner, such that detailed amplitude and phase variations are included. The method directly outputs the inverse propagation operators that are needed for true‐amplitude redatuming. Based on 2D synthetic data it is demonstrated that the resulting redatuming quality is improved and artefacts are reduced. 相似文献
18.
In this paper we discuss a beyond‐alias multidimensional implementation of the multi‐step autoregressive reconstruction algorithm for data with missing spatial samples. The multi‐step autoregressive method is summarized as follows: vital low‐frequency information is first regularized adopting a Fourier based method (minimum weighted norm interpolation); the reconstructed data are then used to estimate prediction filters that are used to interpolate higher frequencies. This article discusses the implementation of the multi‐step autoregressive method to data with more than one spatial dimension. Synthetic and real data examples are used to examine the performance of the proposed method. Field data are used to illustrate the applicability of multidimensional multi‐step autoregressive operators for regularization of seismic data. 相似文献
19.
Dip‐moveout (DMO) correction is often applied to common‐offset sections of seismic data using a homogeneous isotropic medium assumption, which results in a fast execution. Velocity‐residual DMO is developed to correct for the medium‐treatment limitation of the fast DMO. For reasonable‐sized velocity perturbations, the residual DMO operator is small, and thus is an efficient means of applying a conventional Kirchhoff approach. However, the shape of the residual DMO operator is complicated and may form caustics. We use the Fourier domain for the operator development part of the residual DMO, while performing the convolution with common‐offset data in the space–time domain. Since the application is based on an integral (Kirchhoff) method, this residual DMO preserves all the flexibility features of an integral DMO. An application to synthetic and real data demonstrates effectiveness of the velocity‐residual DMO in data processing and velocity analysis. 相似文献
20.
We present a two‐dimensional (2D) gradient operator that produces more accurate results than known traditional operators such as Ando, Sobel and the so‐called Isotropic operator. We further extend the derivation to three‐dimensional (3D), a powerful feature missing in all conventional operators. We start by constructing a parameterized formula that generically represents all 2D numerical gradient operators. We then solve for the required parameter by equating this numerical gradient with that obtained analytically from a single Fourier harmonic (or, equivalently here, a stationary plane wave). As this parameter is frequency‐ and direction‐dependent (by virtue of the underlying Fourier harmonic), we construe a pragmatic version of it that is independent of these two variables yet capable of significantly reducing the error associated with traditional operators. Extension to 3D is achieved similarly; it requires dealing with two parameters as opposed to only one in the 2D case. Synthetic and real‐data results confirm higher accuracy from this operator than from traditional ones. 相似文献