首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 93 毫秒
1.
Abstract— Enstatite meteorites are highly reduced rocks that consist of major, nearly FeO-free enstatite, variable amounts of metallic Fe, Ni and troilite, and a host of rare minerals formed under highly-reducing conditions. They are comprised of the EH and EL chondrites and the aubrites. Here I discuss some of their properties and the nature and number of their parent bodies. Conclusions: 1. EH and EL chondrites show bulk compositional differences in non-volatile major elements that were established by nebular, not planetary processes. Occurrence of abundant breccias among them but lack of clasts of EL in EH chondrites (and vice versa) suggests that EH and EL chondrites represent two separate parent bodies. 2. Aubrites were not derived from known enstatite chondrites on the same parent bodies. Aubrites represent samples from a third enstatite meteorite parent body. 3. The aubrite parent body may have experienced collisional break-up and gravitational reassembly of the debris into a rubble-pile object. 4. The aubrite source material (parent body) was probably enstatite chondrite-like in composition, but had a higher troilite/metallic Fe, Ni ratio, higher contents of titanium and diopside, and possibly less plagioclase than known enstatite chondrites. 5. Shallowater, the only non-brecciated aubrite, does not appear to have formed on the EH, EL, or aubrite parent bodies by either internal (igneous) or external (impact) melting processes. Instead, Shallowater may be a sample from yet a fourth enstatite meteorite parent body. 6. Shallowater experienced a complex three-stage cooling history, requiring an equally complex mode of origin: collisional break-up of a molten or partly molten body by impact with a solid body, followed by gravitational reassembly. 7. It is unknown why some enstatite meteorite parent bodies melted (the aubrite and Shallowater bodies), and others did not (the EH and EL bodies). If unipolar dynamo induction by a primordial T Tauri sun was the dominant heat source that heated asteroidal-sized bodies in the early Solar System, then the aubrite and Shallowater parent bodies may have melted because they were of intermediate sizes, whereas the EH and EL bodies did not melt because they were either much smaller or much larger.  相似文献   

2.
Abstract– Six chondritic clasts in the Cumberland Falls polymict breccia were examined: four texturally resemble ordinary chondrites (OCs) and two are impact melt breccias containing shocked OC clasts adjacent to a melt matrix. The six chondritic clasts are probably remnants of a single OC projectile that was heterogeneously shocked when it collided with the Cumberland Falls host. Mayo Belwa is the first known aubrite impact melt breccia. It contains coarse enstatite grains exhibiting mosaic extinction; the enstatite grains are surrounded by a melt matrix composed of 3–16 μm‐size euhedral and subhedral enstatite grains embedded in sodic plagioclase. Numerous vugs, ranging from a few micrometers to a few millimeters in size, constitute ～5 vol% of the meteorite. They occur nearly exclusively within the Mayo Belwa matrix; literature data show that some vugs are lined with bundles of acicular grains of the amphibole fluor‐richterite. This phase has been reported previously in only two other enstatite meteorites (Abee and St. Sauveur), both of which are EH‐chondrite impact melt breccias. It seems likely that in Mayo Belwa, volatiles were vaporized during an impact event and formed bubbles in the melt. As the melt solidified, the bubbles became cavities; plagioclase and fluor‐richterite crystallized at the margins of these cavities via reaction of the melt with the vapor.  相似文献   

3.
Abstract– Compared with ordinary chondrites, there is a relative paucity of chronological and other data to define the early thermal histories of enstatite parent bodies. In this study, we report 39Ar‐40Ar dating results for five EL chondrites: Khairpur, Pillistfer, Hvittis, Blithfield, and Forrest; five EH chondrites: Parsa, Saint Marks, Indarch, Bethune, and Reckling Peak 80259; three igneous‐textured enstatite meteorites that represent impact melts on enstatite chondrite parent bodies: Zaklodzie, Queen Alexandra Range 97348, and Queen Alexandra Range 97289; and three aubrites, Norton County, Bishopville, and Cumberland Falls Several Ar‐Ar age spectra show unusual 39Ar recoil effects, possibly the result of some of the K residing in unusual sulfide minerals, such as djerfisherite and rodderite, and other age spectra show 40Ar diffusion loss. Few additional Ar‐Ar ages for enstatite meteorites are available in the literature. When all available Ar‐Ar data on enstatite meteorites are considered, preferred ages of nine chondrites and one aubrite show a range of 4.50–4.54 Ga, whereas five other meteorites show only lower age limits over 4.35–4.46 Ga. Ar‐Ar ages of several enstatite chondrites are as old or older as the oldest Ar‐Ar ages of ordinary chondrites, which suggests that enstatite chondrites may have derived from somewhat smaller parent bodies, or were metamorphosed to lower temperatures compared to other chondrite types. Many enstatite meteorites are brecciated and/or shocked, and some of the younger Ar‐Ar ages may record these impact events. Although impact heating of ordinary chondrites within the last 1 Ga is relatively common for ordinary chondrites, only Bethune gives any significant evidence for such a young event.  相似文献   

4.
Abstract— The enstatite achondrite meteorites (aubrites) are ultramafic assemblages with highly variable bulk rare earth element (REE) compositions. An enrichment of REE in a dark clast from the Khor Temiki aubrite led Wolf et al. (1983) to suggest that such dark clasts could be the basaltic (i.e., enstatite-plagioclase) complements to the ultramafic aubrites, with the relatively high REE contents resulting from the presence of plagioclase, which is a common carrier of the REEs. We have studied several dark clasts from the Khor Temiki aubrite and find no evidence for a basaltic character for such material. The microscopic character of the dark clasts is not significantly different from the main portions of Khor Temiki and consists either of highly brecciated material, containing a fine-grained matrix, or of enstatite grains with abundant inclusions. We suggest that the dark clasts are shock-darkened, heterogeneous Khor Temiki material that, by chance, contained variable trace contents of oldhamite (CaS), which has been shown to be a major carrier of REE in aubrites. We find that the REE contents of the clasts range from 0.1 to ～20× CI. Most have negative Eu anomalies, but one has a small positive anomaly. Extensive searches have failed to identify basaltic material in Khor Temiki and other aubrites. The absence of basaltic material is consistent with, but does not prove, the model of Wilson and Keil (1991). They calculate that, on an asteroidal parent body < ～100 km in radius, a volatile-rich basaltic partial melt erupted with a velocity greater than the escape velocity of the asteroid and, thus, was lost into space ～ 4.55 Ga ago.  相似文献   

5.
Abstract– We studied the mineralogy, petrology, and bulk, trace element, oxygen, and noble gas isotopic compositions of a composite clast approximately 20 mm in diameter discovered in the Larkman Nunatak (LAR) 04316 aubrite regolith breccia. The clast consists of two lithologies: One is a quench‐textured intergrowth of troilite with spottily zoned metallic Fe,Ni which forms a dendritic or cellular structure. The approximately 30 μm spacings between the Fe,Ni arms yield an estimated cooling rate of this lithology of approximately 25–30 °C s?1. The other is a quench‐textured enstatite‐forsterite‐diopside‐glass vitrophyre lithology. The composition of the clast suggests that it formed at an exceptionally high degree of partial melting, perhaps approaching complete melting, and that the melts from which the composite clast crystallized were quenched from a temperature of approximately 1380–1400 °C at a rate of approximately 25–30 °C s?1. The association of the two lithologies in a composite clast allows, for the first time, an estimation of the cooling rate of a silicate vitrophyre in an aubrite of approximately 25–30 °C s?1. While we cannot completely rule out an impact origin of the clast, we present what we consider is very strong evidence that this composite clast is one of the elusive pyroclasts produced during pyroclastic volcanism on the aubrite parent body ( Wilson and Keil 1991 ). We further suggest that this clast was not ejected into space but retained on the aubrite parent body by virtue of the relatively large size of the clast of approximately 20 mm. Our modeling, taking into account the size of the clast, suggests that the aubrite parent body must have been between approximately 40 and 100 km in diameter, and that the melt from which the clast crystallized must have contained an estimated maximum range of allowed volatile mass fractions between approximately 500 and approximately 4500 ppm.  相似文献   

6.
Abstract— In Qingzhen (EH3), oldhamite contains numerous types of inclusions and intergrows with other phases; but in equilibrated enstatite chondrites and aubrites, it usually occurs as individual grains. I suggest that oldhamite in unequilibrated enstatite chondrites (UECs) crystallized from a melt, probably during chondrule formation. Subsequent thermal metamorphism on the parent bodies further modified the oldhamite occurrences in enstatite chondrites. This suggestion is consistent with the results of melting experiments on UECs and aubrites and with the volatile element enrichments in this mineral. I analyzed minor and trace element abundances in diopside from two aubrites. These data and petrographic observations suggest that diopside formed by igneous crystallization. I report the first known occurrence of roedderite in an aubrite and its major, minor, and trace element concentrations. This mineral is rich in alkalis but is depleted in siderophile and refractory lithophile elements. A negative Sm anomaly was noted in albite from equilibrated enstatite chondrites and aubrites.  相似文献   

7.
Abstract— NWA 2526 is a coarse‐grained, achondritic rock dominated by equigranular grains of polysynthetically twinned enstatite (?85 vol%) with frequent 120° triple junctions and ?10–15 vol% of kamacite + terrestrial weathering products. All other phases including troilite, daubreelite, schreibersite, and silica‐normative melt areas make up 相似文献   

8.
Abstract— Polymict ureilites contain various mineral and lithic clasts not observed in monomict ureilites, including plagioclase, enstatite, feldspathic melt clasts and dark inclusions. This paper investigates the microdistributions and petrogenetic implications of rare earth elements (REEs) in three polymict ureilites (Elephant Moraine (EET) 83309, EET 87720 and North Haig), focusing particularly on the mineral and lithic clasts not found in monomict ureilites. As in monomict ureilites, olivine and pyroxene are the major heavy (H)REE carriers in polymict ureilites. They have light (L)REE‐depleted patterns with little variation in REE abundances, despite large differences in major element compositions. The textural and REE characteristics of feldspathic melt clasts in the three polymict ureilites indicate that they are most likely shocked melt that sampled the basaltic components associated with ureilites on their parent body. Simple REE modeling shows that the most common melt clasts in polymict ureilites can be produced by 20–30% partial melting of chondritic material, leaving behind a ureilitic residue. The plagioclase clasts, as well as some of the high‐Ca pyroxene grains, probably represent plagioclase‐pyroxene rock types on the ureilite parent body. However, the variety of REE patterns in both plagioclase and melt clasts cannot be the result of a single igneous differentiation event. Multiple processes, probably including shock melting and different sources, are required to account for all the REE characteristics observed in lithic and mineral clasts. The C‐rich matrix in polymict ureilites is LREE‐enriched, like that in monomict ureilites. The occurrence of Ce anomalies in C‐rich matrix, dark inclusions and the presence of the hydration product, iddingsite, imply significant terrestrial weathering. A search for 26Mg excesses, from the radioactive decay of 26Al, in the polymict ureilite EET 83309 was negative.  相似文献   

9.
Anorthositic impact melt rocks, their target rocks (principally anorthosite, mangerite, granodiorite) and zircon clasts from the ∼36-Ma-old, 28-km-wide Mistastin Lake crater of northern Labrador (55°53′N; 63°18′W) have been examined in order to evaluate the scale and origin of compositional heterogeneities in impact melts produced in craters of moderate size. In particular we assess whether and, if so, how the initial composition of the impact melt was modified as it entrained mineral clasts derived from the underlying rocks over which it flowed when it moved away from the shock-induced, central melting zone. A secondary goal was to determine if zircon clasts in the impact melts are present in the proportions of their target rock sources and/or the substrate lithologies over which they flowed. Chemical compositions of bulk samples of 33 melt rocks and 14 target rocks were measured by XRF and SN-ICPMS. Matrix compositions of nine samples of impact melt rocks were determined by EPMA and LA-ICPMS. Zircon grains from four samples of target rock and zircon clasts from three samples of impact melt rock were measured for multi-element composition, U-Pb age and Hf-isotopic composition by LA-(MC)-ICPMS.The data reveal compositional heterogeneities in the impact melts on the scales of both bulk samples and matrices. Bulk samples can be divided into compositions with high and low concentrations of high-field-strength elements (HFSE; Ti, Zr, Nb) and Fe, Ba, Ce and Y. High HFSE-type melt rocks formed when impact melt entrained large quantities of clasts from mangerite, which is rich in HFSE. Matrix compositions of bulk samples do not show the HFSE distinction but are affected by the introduction of low-temperature melts from the clasts to form dispersed, micron-scale silica-rich heterogeneities.The best estimate of sources of the initial impact melt is ∼73% anorthosite, ∼7% mangerite and ∼20% granodiorite, based on least-squares modeling of major-element compositions of the matrices of thinner flows. Zircon derived from anorthosite can be distinguished from zircon from mangerite and granodiorite by higher Nb/Ta and Eu/Eu* ratios and more negative initial ε Hf values. Zircon clasts >40 mm in size in the impact melt rocks are dominantly or exclusively derived from mangerite and granodiorite rather than from anorthosite. Because anorthosite was the principal source of impact melt at Mistastin, zircon may be a poor provenance indicator for anorthosite contributions to impact melts, particularly where grains smaller than 40 microns are not analyzed.  相似文献   

10.
Abstract— Sayh al Uhaymir (SaU) 300 comprises a microcrystalline igneous matrix (grain size <10 μm), dominated by plagioclase, pyroxene, and olivine. Pyroxene geothermometry indicates that the matrix crystallized at ?1100 °C. The matrix encloses mineral and lithic clasts that record the effects of variable levels of shock. Mineral clasts include plagioclase, low‐ and high‐Ca pyroxene, pigeonite, and olivine. Minor amounts of ilmenite, FeNi metal, chromite, and a silica phase are also present. A variety of lithic clast types are observed, including glassy impact melts, impact‐melt breccias, and metamorphosed impact melts. One clast of granulitic breccia was also noted. A lunar origin for SaU 300 is supported by the composition of the plagioclase (average An95), the high Cr content in olivine, the lack of hydrous phases, and the Fe/Mn ratio of mafic minerals. Both matrix and clasts have been locally overprinted by shock veins and melt pockets. SaU 300 has previously been described as an anorthositic regolith breccia with basaltic components and a granulitic matrix, but we here interpret it to be a polymict crystalline impact‐melt breccia with an olivine‐rich anorthositic norite bulk composition. The varying shock states of the mineral and lithic clasts suggest that they were shocked to between 5–28 GPa (shock stages S1–S2) by impact events in target rocks prior to their inclusion in the matrix. Formation of the igneous matrix requires a minimum shock pressure of 60 GPa (shock stage >S4). The association of maskelynite with melt pockets and shock veins indicates a subsequent, local 28–45 GPa (shock stage S2–S3) excursion, which was probably responsible for lofting the sample from the lunar surface. Subsequent fracturing is attributed to atmospheric entry and probable breakup of the parent meteor.  相似文献   

11.
Northwest Africa (NWA) 10986 is a new mingled lunar meteorite found in 2015 in Western Sahara. This impact melt breccia contains abundant impact melt glass and clasts as large as 0.75 mm. Clasts are predominantly plagioclase and pyroxene‐rich and represent both highland and basalt lithologies. Highland lithologies include troctolites, gabbronorites, anorthositic norites, and troctolitic anorthosites. Basalt lithologies include crystalline clasts with large zoned pyroxenes representing very low titanium to low titanium basalts. In situ geochemical analysis of minerals within clasts indicates that they represent ferroan anorthosite, Mg‐suite, and gabbronorite lithologies as defined by the Apollo sample collection. Clasts representing magnesian anorthosite, or “gap” lithologies, are prevalent in this meteorite. Whole rock and in situ impact glass measurements indicate low incompatible trace element concentrations. Basalt clasts also have low incompatible trace element concentrations and lack evolved KREEP mineralogy although pyroxferroite grains are present. The juxtaposition of evolved, basaltic clasts without KREEP signatures and highland lithologies suggests that these basaltic clasts may represent cryptomare. The lithologies found in NWA 10986 offer a unique and possibly a complete cross section view of the Moon sourced outside of the Procellarum KREEP Terrane.  相似文献   

12.
Abstract— Clasts of deep-seated crystalline basement rocks in suevites of the Ries crater, Germany, were catalogued lithologically and classified with regard to their degree of shock metamorphism. The sample suite consisted of 806 clasts from 10 outcrops in fallout suevites and 447 clasts from drill cores encountering crater suevite in the crater interior. These clasts can be grouped into seven types of metamorphic and nine types of igneous rocks. One hundred forty-three clasts, representing these lithologies, were analyzed for major element bulk composition. The fallout suevite contains on average 4 vol% of crystalline basement clasts, 0.4 vol% of sedimentary rocks, 16 vol% of glass bodies (some of them aerodynamically shaped), and 79 vol% of groundmass. On average, 52% of all crystalline clasts are from metamorphic sources and 42% are of igneous origin. Using the shock classification of Stöffler (1974), 8% of all crystalline clasts appear unshocked (<10 Gpa), and 34, 30 and 27% of clasts are shocked to stages I (10–35 Gpa), II (35–45 GPa) and III (45–60 GPa), respectively. The bulk composition of suevite glasses is consistent with the modal proportions of crystalline rock types observed in the clast populations. This indicates that the glasses originate by shock-fusion of a similarly composed basement. The crater suevite contains the same crystalline rock types that occur in the fallout suevites. The bore hole “Nördlingen 1973” yields an average of 62 vol% metamorphic and 38 vol% igneous rocks. The crater suevite differs from fallout suevites by a higher clast/glass ratio, by preponderance (65–95%) of clasts shocked to stage I only, and by the absence of aerodynamically shaped glass bodies. The source of crystalline clasts and melt particles of suevites is a volume of rocks, located deep in the crystalline basement, to which the projectile transmittted most of its energy so that only rocks of the basement were shocked by pressures exceeding 10 GPa (deep-burst impact model). Fallout suevites were ejected, propelled by an expanding plume of vaporized rock, and withdrew preferentially from this volume melt and highly shocked clasts, leaving in the transient cavity the crater suevite with more clasts of modest shock levels and less melt.  相似文献   

13.
Abstract— The impact melt breccias from the Tenoumer crater (consisting of a fine‐grained intergrowth of plagioclase laths, pyroxene crystals, oxides, and glass) display a wide range of porosity and contain a large amount of target rock clasts. Analyses of major elements in impact melt rocks show lower contents of SiO2, Al2O3, and Na2O, and higher contents of MgO, Fe2O3, and CaO, than the felsic rocks (i.e., granites and gneisses) of the basement. In comparison with the bulk analyses of the impact melt, the glass is strongly enriched in Si‐Al, whereas it is depleted both in Mg and Fe; moreover, the impact melt rocks are variably enriched or depleted in some REE with respect to the felsic and mafic bedrock types. Gold is slightly enriched in the impact melt, and Co, Cr, and Ni abundances are possibly due to a contribution from mafic bedrock. Evidences of silicate‐carbonate liquid immiscibility, mainly as spherules and globules of calcite within the silicate glass, have been highlighted. HMX mixing calculation confirm that the impact melt rocks are derived from a mixing of at least six different target lithologies outcropping in the area of the crater. A large contribution is derived from granitoids (50%) and mica schist (17–19%), although amphibolites (?15%), cherty limestones (?10%), and ultrabasites (?6%) components are also present. The very low abundances of PGE in the melt rock seem to come mainly from some ultrabasic target rocks; therefore, the contamination from the meteoritic projectile appears to have been negligible.  相似文献   

14.
Abstract— Diogenites are orthopyroxenites that may contain chromite and olivine as accessory minerals. Howardite breccias contain orthopyroxenite clasts with similar properties compared to monomict diogenites. We used statistical methods and variation plots of major and minor elements in orthopyroxene and chromite to show whether or not howardite orthopyroxenites are related to monomict diogenites, and to assess their petrogenesis. Our results fail to establish any evidence that monomict diogenites are significantly different from howardite orthopyroxenites in terms of major and minor elements. We also found no differences between Antarctic diogenites and non-Antarctic diogenites. Although element variation plots show compelling evidence that most diogenites originated by igneous fractionation, linear trends among the various diogenites and howardite orthopyroxenite clasts are either non-existent or ill-defined. This militates against an origin from a single magma body, but suggests an origin from multiple magma bodies in the parent planetoid.  相似文献   

15.
The meteorite Mount DeWitt (DEW) 12007 is a polymict regolith breccia mainly consisting of glassy impact‐melt breccia particles, gabbroic clasts, feldspathic clasts, impact and volcanic glass beads, basaltic clasts, and mingled breccia clasts embedded in a matrix dominated by fine‐grained crystals; vesicular glassy veins and rare agglutinates are also present. Main minerals are plagioclase (typically An>85) and clinopyroxene (pigeonites and augites, sometimes interspersed). The presence of tranquillityite, coupled with the petrophysical data, the O‐isotope data (Δ17O = ?0.075), and the FeOtot/MnO ratios in olivine (91), pyroxene (65), and bulk rock (77) indicate a lunar origin for DEW 12007. Impactites consist of Al‐rich impact‐melt splashes and plagioclase‐rich meta‐melt clasts. The volcanic products belong to the very low titanium (VLT) or low titanium (LT) suites; an unusual subophitic fragment could be cryptomare‐related. Gabbroic clasts could represent part of a shallow intrusion within a volcanic complex with prevailing VLT affinity. DEW 12007 has a mingled bulk composition with relatively high incompatible element abundances and shows a high crustal diversity comprising clasts from the Moon's major terranes and rare lithologies. First‐order petrographic and chemical features suggest that DEW 12007 could be launch‐paired with other meteorites including Y 793274/981031, QUE 94281, EET 87521/96008, and NWA 4884.  相似文献   

16.
We present petrologic and isotopic data on Northwest Africa (NWA) 4799, NWA 7809, NWA 7214, and NWA 11071 meteorites, which were previously classified as aubrites. These four meteorites contain between 31 and 56 vol% of equigranular, nearly endmember enstatite, Fe,Ni metal, plagioclase, terrestrial alteration products, and sulfides, such as troilite, niningerite, daubréelite, oldhamite, and caswellsilverite. The equigranular texture of the enstatite and the presence of the metal surrounding enstatite indicate that these rocks were not formed through igneous processes like the aubrites, but rather by impact processes. In addition, the presence of pre‐terrestrially weathered metal (7.1–14 vol%), undifferentiated modal abundances compared to enstatite chondrites, presence of graphite, absence of diopside and forsterite, low Ti in troilite, and high Si in Fe,Ni metals suggest that these rocks formed through impact melting on chondritic and not aubritic parent bodies. Formation of these meteorites on a parent body with similar properties to the EHa enstatite chondrite parent body is suggested by their mineralogy. These parent bodies have undergone impact events from at least 4.5 Ga (NWA 11071) until at least 4.2 Ga (NWA 4799) according to 39Ar‐40Ar ages, indicating that this region of the solar system was heavily bombarded early in its history. By comparing NWA enstatite chondrite impact melts to Mercury, we infer that they represent imperfect petrological analogs to this planet given their high metal abundances, but they could represent important geochemical analogs for the behavior and geochemical affinities of elements on Mercury. Furthermore, the enstatite chondrite impact melts represent an important petrological analog for understanding high‐temperature processes and impact processes on Mercury, due to their similar mineralogies, Fe‐metal‐rich and FeO‐poor silicate abundances, and low oxygen fugacity.  相似文献   

17.
Martian regolith breccia NWA 7533 (and the seven paired samples) is unique among Martian meteorites in showing accessory pyrite (up to 1% by weight). Pyrite is a late mineral, crystallized after the final assembly of the breccia. It is present in all of the lithologies, i.e., the fine‐grained matrix (ICM), clast‐laden impact melt rocks (CLIMR), melt spherules, microbasalts, lithic clasts, and mineral clasts, all lacking magmatic sulfides due to degassing. Pyrite crystals show combinations of cubes, truncated cubes, and octahedra. Polycrystalline clusters can reach 200 μm in maximum dimensions. Regardless of their shape, pyrite crystals display evidence of very weak shock metamorphism such as planar features, fracture networks, and disruption into subgrains. The late fracture systems acted as preferential pathways for partial replacement of pyrite by iron oxyhydroxides interpreted as resulting from hot desert terrestrial alteration. The distribution and shape of pyrite crystals argue for growth at moderate to low growth rate from just‐saturated near neutral (6 < pH<10), H2S‐HS‐rich fluids at minimum log fO2 of >FMQ + 2 log units. It is inferred from the maximum Ni contents (4.5 wt%) that pyrite started crystallizing at 400–500 °C, during or shortly after a short‐duration, relatively low temperature, thermal event that lithified and sintered the regolith breccias, 1.4 Ga ago as deduced from disturbance in several isotope systematics.  相似文献   

18.
Abstract The ～7.5 km diameter Wanapitei impact structure (46°45′N; 80°45′W) lies entirely within Lake Wanapitei in central Ontario, Canada. Impact lithologies are known only from glacial float at the southern end of the lake. Over 50% of the impact lithologies recovered from this float can be classified as suevite, <20% as highly shocked and partially melted arkosic metasediments of the target rock Mississagi Formation or, possibly, the Serpent Formation and <20% as glassy impact melt rocks. An additional <5% of the samples have similarities to the suevite but have up to 50% glass clasts and are tentatively interpreted as fall-back material. The glassy impact melt rocks fall into two textural and mineralogical types: a perlitically fractured, colorless glass matrix variant, with microlites of hypersthene with up to 11.5% Al2O3 and a “felted” matrix variant, with evidence of flow prior to the crystallization of tabular orthopyroxene. These melt glasses show chemical inhomogeneities on a microscopic scale, with areas of essentially SiO2, even when appearing optically homogeneous. They are similar in bulk composition for major elements, but the felted matrix variant is ～5×more enriched in Ni, Co and Cr, the interelement ratios of which are indicative of an admixture of a chondritic projectile. Mixing models suggest that the glassy impact melt rocks can be made from the target rocks in the proportions: ～55% Gowganda wacke, ～42% Serpent arkose and ～3% Nipissing intrusives. Geologic reconstructions suggest that this is a reasonable mixture of potential target rocks at the time of impact.  相似文献   

19.
Abstract— Aubritic oldhamite (CaS) has been the subject of intense study recently because it is the major rare-earth-element (REE) carrier in aubrites, has a variety of REE patterns comparable to those in unequilibrated enstatite chondrites and has an extraordinarily high melting point as a pure substance (2525 °C). These latter two facts have caused some authors to assert that much of the aubritic oldhamite is an unmelted nebular relict, rather than of igneous origin. We have conducted REE partitioning experiments between oldhamite and silicate melt using an aubritic bulk composition at 1200 °C and 1300 °C and subsolidus annealing experiments. All experiments produced crystalline oldhamite, with a range of compositions, glass and Fe metal, as well as enstatite, SiO2, diopside and troilite in some charges. Rare-earth-element partitioning is strongly dependent on oldhamite composition and temperature. Subsolidus annealing results in larger partition coefficients for some oldhamite grains, particularly those in contact with troilite. All experimental oldhamite/silicate melt partition coefficients are <20 and the vast majority are <5, which is similar to those reported in the literature and is two orders of magnitude less than those inferred for natural aubritic oldhamite. These partition coefficients preclude a simple igneous model, since REE abundances in aubritic oldhamite are greater than would be predicted on the basis of the experimental partition coefficients. Our experimental partition coefficients are consistent with a relict nebular origin for aubritic oldhamite, although experimental evidence that suggests melting of oldhamite at temperatures lower than that reached on the aubrite parent body are clearly inconsistent with the nebular model. Our experiments are consistent also with a complex igneous history. Oldhamite REE patterns may reflect a complex process of partial melting, melt removal, fractional crystallization and subsolidus annealing and exsolution. These mechanisms (primarily fractional crystallization and subsolidus annealing) can produce a wide range of REE patterns in aubritic oldhamite, as well as elevated (100–1000 × CI) REE abundances observed in aubritic oldhamite.  相似文献   

20.
Abstract— The ～400 Ma old Ilyinets impact structure was formed in the Precambrian basement of the Ukrainian Shield and is now mostly covered by Quaternary sediments. Various impact breccias and melts are exposed in its southern section. The crater is a complex structure with a central uplift that is surrounded by an annular deposit of breccias and melt rocks. In the annulus, brecciated basement rocks are overlain by up to 80 m of glass-poor suevitic breccia, which is overlain (and partly intercalated) by glass-rich suevite with a thickness of up to 130 m. Impact-melt rocks occur within and on top of the suevites—in some cases in the form of devitrified bomb-shaped impact-glass fragments. We have studied the petrographic and geochemical characteristics of 31, mostly shocked, target rock samples (granites, gneisses, and one amphibolite) obtained from drill cores within the structure, and impact breccias and melt rock samples from drill cores and surface exposures. Multiple sets of planar deformation features (PDFs) are common in quartz, potassium feldspar, and plagioclase of the shocked target rocks. The breccias comprise more or less devitrified impact melt with shocked clasts. The impact-melt rocks (“bombs”) show abundant vesicles and, in some cases, glass is still present as brownish patches and schlieren. All impact breccias (including the melt rocks) are strongly altered and have significantly elevated K contents and lower Na contents than the target rocks. The alteration could have occurred in an impact-induced hydrothermal system. The bomb-shaped melt rocks have lower Mg and Ca contents than other rock types at the crater. Compared to target rocks, only minor enrichments of siderophile element contents (e.g., Ni, Co, Ir) in impact-melt rocks were found.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号